Using the INFO button (Now & Next guide)
Contents
1. e Repeat Select Once Manual Sat Sun Mon Fri or Everyday If you select Manual you can set the day you want A check v mark indicates a day you selected e Date You can set a desired date Date is available only when you select Once in Repeat e Start Time You can set the start time you want If you want to edit or cancel a reserved schedule select the reserved schedule on Schedule Manager Then press the ENTERL button and select the Edit D gt or Delete E Edit Channel MENU Broadcasting Edit Channel ENTERC You can add or delete channels Deleting a channel from the channel list 1 Go to Edit Channel screen 2 Press the 4 w buttons to select the desired channel and then press ENTERL button The v mark indicates the channel you ve selected You can select more than one channel Press ENTERL button again to deselect the channel 3 Press amp Delete button The selected channel has been deleted from the channel list Adding a channel to the channel list 1 On the Edit Channel screen press the TOOLS button and then select the Category 2 Select All and press the OK button A deleted channel appears in All channel list Your TV will display all channels including channels you deleted from the Channel list on the All A gray colored channel indicates the channel has been deleted 3 Select a deleted channel and then press the E Add button S Using the colored and func2. Digital Audio Out is used to provide digital sound reducing interference going to speakers and various digital devices such as a DVD player Audio Format You can select the Digital Audio output format The available Digital Audio output format may differ depending on the input source By connecting to 5 1ch speakers in a dolby digital setup maximize your interactive 3D sound experience e Audio Delay Correct audio video mismatch when watching TV or video and listening to digital audio output using an external device such as an AV receiver Oms 250ms E Reset Sound MENU Sound Reset Sound ENTER Reset all sound settings to the factory defaults Select Reset Sound press ENTERL select Yes on the pop up and then press ENTERL again U Executing initial setup E Setup MENUDO System Setup ENTERC Configure the channels and the time when setting up the TV for the first time or when resetting the unit Execute the initial setup following instructions that the TV guides Enter your 4 digit PIN the default of which is 0 0 0 0 U Setting the Time E Time MENU System Time ENTER 4 The current time will appear every time you press the INFO button e Clock Set the clock to use the various timer features of the TV If you disconnect the power cord you have to set the clock again Clock Mode Set the current time Manual or Auto e Auto The TV sets the current time automatically using t
3. Disabled when an attached PC is in power saving mode e Auto Power Off The TV will automatically turned off when no user operation is received for 4 hours If the Auto Power Off option is set to Off the TV will stay on even if no operations are performed on the TV Q Other Features E Menu Language MENU System Menu Language ENTERC Set the menu language 1 Select Menu Language and then press the ENTERL button 2 Choose a language and then press the ENTERL button lt Choose English Espanol Portugu s or Francais The available language may differ depending on the countries WE Auto Protection Time MENUDO System Auto Protection Time ENTERC e Auto Protection Time Activates the Screen Burn Protection function if a still frame is shown for longer than the specified duration Displaying a still frame for longer than 4 hours can burn the screen E Change PIN MENU System Change PIN ENTERC The Change PIN screen will appear Choose any 4 digits for your PIN and enter it in Enter New PIN Re enter the same 4 digits in Confirm New PIN When the Confirm screen appears press the Close button The TV has memorized your new PIN When you access the Change PIN function for the first time the PIN input screen appears Enter a 4 digit PIN you will remember The default PIN number for a new TV set is 0 0 0 0 If you forget the PIN code press the remote control buttons in the f
4. ENTERC4 The screen is turned off but the sound remains on Press any button except Power and Volume buttons on your remote to turn the screen back on M Reset Picture MENU Picture Reset Picture ENTER 4 Resets your current picture mode to its default settings Q Changing the Preset Sound Modes E Sound Mode MENUO Sound Sound Mode ENTER Use the 4 w buttons to select an option and then press ENTERL 4 4 o o If Speaker Select is set to External Speaker Sound Mode is disabled Standard Selects the normal sound mode Music Emphasizes music over voices Movie Provides the best sound for movies Clear Voice Emphasizes voices over other sounds Amplify Increase the intensity of high frequency sounds to allow a better listening experience for the hearing impaired Q Adjusting Sound Settings E Sound Effect MENU Sound Sound Effect ENTERC standard sound mode only Use the 4 w buttons to select an option and then press ENTERL4 lf Speaker Select is set to External Speaker Sound Effect is disabled e DTS TruSurround HD gt This function provides a virtual 5 1 channel surround sound experience through a pair of soeakers or headphones using HRTF Head Related Transfer Function technology e DTS TruDialog This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly e Equalizer Use Equaliz
5. G R MENU Picture Backlight ENTERC Your television has several options for adjusting picture quality Select an option using the amp w 4 p gt buttons and then press ENTERL4 NOTE e When you make changes to Backlight Contrast Brightness Sharpness Color or Tint G R the OSD will be adjusted accordingly e When connecting a PC you can only make changes to Backlight Contrast Brightness and Sharpness e You can adjust and store settings for each external device connected to the TV e Lowering picture brightness reduces power consumption E Picture Size MENU Picture Picture Size ENTERC4 Picture Size provides various picture size and aspect ratio options Select an option using the amp w 4 gt buttons and then press ENTERC4 e Picture Size If you have a cable box or satellite receiver it may have its own set of screen sizes as well However we highly recommend you use your TV s 16 9 mode most of the time 16 9 Sets the picture to 16 9 wide screen mode Zoom1 Magnifies the picture moderately Cuts off the top and sides Zoomz2 Magnities the picture more than Zoom1 Wide Fit Enlarges the aspect ratio of the picture so it fits the entire screen 4 3 Sets the picture to 4 3 mode Do not set your TV to 4 3 format for a long time The borders displayed on the left and right or top and bottom of the screen may cause image retention Screen burn which is not covered by the warranty Sc
6. Mon Sat Sat Sun or Manual If you select Manual you can choose the days you want On Timer to turnon P your TV The v mark indicates days you ve selected Time Set the hour minute am om Use the number buttons or the amp w buttons to enter numbers Use the 4 gt buttons to change entry fields Volume Set the desired volume level Use the lt gt buttons to change the volume level Source Specify which source to dispaly when the TV turns on The TV displays an air cable broadcast USB plays photos or music files from a USB device Selecting a source on a TV connected to a set top box displays the channel from the set top box The USB option can be selected if a USB device is connected to the TV To select a source other than TV or USB you must perform the following e Connect the cable or satellite set top box to the AV port e Tune the set top box to the channel you wish to display e Turn on the set top box If a source other than TV or USB is selected The Antenna and Channel options disappear Antenna when the Source is set to TV Select Air or Cable Channel when the Source is set to TV Select the desired channel Music Photo when the Source is set to USB Select a folder in the USB device containing the music or photo files you want to play when the TV turns on automatically If there is no music file on the USB device or you don t select a folder containing a music file the Timer function does not op
7. PIN input window appears How to Stop Auto Program 1 Press the ENTERL button to select Stop 2 A message will ask Stop Auto Program Select Yes by pressing the 4 or gt button 3 Press the ENTERL4 button When you select Change Settings antenna setting screen appears You can set antenna settings and start channel search again Press the Scan Again to restart channel search E Antenna MENU Broadcasting Antenna ENTERC To begin the memorizing procedure follow these steps 1 Select Antenna and then press ENTERL 2 Select the source of your TV signal Air or Cable Selecting Air or Cable also changes the actual signal input from Air to Cable or Cable to Air Q Using the Channel menu E Channel List MENU Broadcasting Channel List ENTERC The Channel List contains the channels your TV displays added channels when you press the channel button You can view channel information Added Ch Edit Favorites Favorites 1 Favorites 5 Press Mode button to change the channel mode When you press the CH LIST button Channel List screen is displayed at b gt once Mode e Antenna Switch between Air and Cable e Edit Favorites Set channels you watch frequently as favorites Add or delete the selected channel in Favorites 1 Favorites 5 For detailed information about using Edit Favorites refer to Edit Favorites e Favorites 1 Favorites 5 Show all favorite channels ar
8. Q Using the INFO button Now amp Next guide The display identifies the current channel and the status of certain audio video settings The Now amp Next guide shows daily TV program information for each channel according to the broadcasting time When you press the INFO button a channel information banner will appear on the top of the screen And then press the ENTERL button you can see the details of the program e Scroll 4 gt to view information for a desired program while watching the current channel Q Memorizing channels Your TV memorizes channels and adds the memorized channels to the Channel List with the Auto Program function Before your TV can memorize channels you must specify the signal source either Air or Cable E Auto Program MENUO Broadcasting Auto Program ENTERC Scans for channels automatically and stores them in the TV s memory To start Auto Program follow these steps 1 Select Auto Program and then press ENTERL 4 2 Press the ENTERL button to select Start 3 Select Air or Cable or Both by highlighting and then pressing ENTERL 4 Select Scan and then press ENTERL Auto Program starts After all the available channels are stored Auto Program removes scrambled channels When done the Auto Program menu then reappears This process can take up to 30 minutes Automatically allocated program numbers may not correspond to actual or desired program numbers If a channel is locked the
9. alog TV channel mode or when a signal is supplied from an external device to the TV Depending on the broadcasting signal the Analog Caption function may or may not work with digital channels E Audio Options MENU Broadcasting Audio Options ENTERC Audio Language Ga digital channels only Change the default value for audio languages The available language may differ depending on the broadcast e Multi Track Sound analog channels only Select an option using the 4 w buttons and then press ENTERL 4 Mono Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal Stereo Choose for channels that are broadcasting in stereo SAP Choose to listen to the Separate Audio Program which is usually a foreign language translation Depending on the program being broadcast you can listen to Mono Stereo or SAP Q Changing the Preset Picture Mode E Picture Mode MENU Picture Picture Mode ENTERG Picture modes apply preset adjustments to the picture Select a mode using the A V buttons and then press ENTERL4 When connecting a PC you can only select Entertain and Standard Dynamic Suitable for a bright room Standard Suitable for a normal environment Movie Suitable for watching movies in a dark room Entertain Suitable for watching movies and games Q Adjusting Picture Settings E Backlight Contrast Brightness Sharpness Color Tint
10. button Playing the selected files 1 Press the amp button to select Options at the top of each main screen and select Play Selected 2 Select the desired files The check box appears to the left of the selected files Press ENTERL button again to deselect the file 3 Press the amp button to select Play You can select or deselect all files pressing the Select All Deselect All gt Q Playing the Photos Videos Music During playing a file press the 4 w 4 P button to select the desired menu When the option menu is not displayed press the TOOLS button or ENTERL4 button You can also use 11 m lt 44 gt gt buttons on the remote control during playback If you press the INFO button during playback you can view the playback information Playback menu Previous Next Start Slide Show Stop Slide Show lt a Play Pause Mini Player Previous Next Mini Player poe When setting the Background Music to Mini Player in Photos these buttons appear Setting menu e Photos You can set the Slide Show Speed and Slide Show Effect during E li h ttin alge SNO SEUNgS the slide show Zoom You can zoom into images in full screen mode Rotate You can rotate images in full screen mode Background Music You can set background music when watching a slide show You i Mini Player can control simple playback menus Picture Mode Sound Mode You can adjust the picture or sound se
11. cted to an input on the TV Picture Sizes available by Input Source Input Source Picture Size ATV AV Component 480i 480p 16 9 Zoom1 Zoom2 4 3 DTV 1080i Component 1080i 1080p HDMI 720p 1080i 1080p 16 9 Wide Fit 4 3 Screen Fit E PIP MENU Picture PIP ENTERC View two sources on the TV at the same time NOTE e For PIP sound refer to the Sound Select instructions e If you turn the TV off while watching in the PIP mode the PIP function is reset to off When you turn your TV on you must turn PIP on again to watch in the PIP mode e You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke e PIP Settings Sub picture Main picture Component HDMI 1 HDMI2 DVI e PIP Off On Activate or deactivate the PIP function Source Select your desired source Antenna Select either Air or Cable as the input source for the sub screen Channel Select the channel for the sub screen Size Select a size for the sub picture Position Select a position for the sub picture Sound Select You can choose to listen to the sound from the Main picture or the Sub picture Q Changing the Picture Options E Advanced Settings MENU Picture Advanced Settings ENTERC Advanced Settings are available in the Standard and Movie modes To use select an option using the 4 w 4 P gt buttons and then p
12. ctivated when the picture mode is Dynamic You can adjust and store settings for each external device connected to an input on the TV e Digital Clean View If the broadcast signal received by your TV is weak you can activate the Digital Clean View feature to reduce any static and ghosting that may appear on the screen When the signal is weak try each option until the TV displays best picture Auto Visualization When changing analog channels displays signal strength Only available for analog channels When the INFO button is pressed the signal strength bar is displayed When the bar is green you are receiving the best possible signal e MPEG Noise Filter Reduces MPEG noise to provide improved picture quality e HDMI Black Level Lets you select the black level on the screen to adjust the screen depth Available only in HDMI mode RGB signals e Film Mode Sets the TV so that it senses and then processes film signals from all sources automatically and adjusts the picture for optimum quality Available in TV mode and external input mode which supports SD 480i 5 61 and HD 1080 signals except in PC mode If the screen does not seem natural change its option to Off Auto1 Auto2 in Film Mode e LED Clear Motion Removes drag from fast scenes with a lot of movement to provide a clear picture The screen may become slightly darker when you play LED Clear Motion E Picture Off MENU Picture Picture Off
13. e problem persists refer to the external device s user manual e Signal Information digital channels only The reception quality of over the air HD channels is either perfect or the channels are unavailable Signal Information displays HD channel signal strength so you can adjust your antenna to increase signal strength and receive HD channels e Reset Reset all settings to the factory defaults The PIN input screen appears before the setup screen Enter your 4 digit PIN Change the PIN using the Change PIN option Q Updating the Software E Software Update MENUDO Support Software Update ENTERC The Software Update menu lets you upgrade your TV s software to the latest version e Update now Update software by downloading update files Upgrading to the Latest Version Check your TV s software version and upgrade it if necessary The TV will turn off and on automatically after completing the software upgrade All video and audio settings return to the default settings after a software upgrade LI Changing the Use Mode E Use Mode MENU Support Use Mode ENTERC Select the Use Mode suitable for your place We strongly recommend you select Home Use e Home Use Home Use is the default setting e Store Demo Store Demo is for retail environments only If you select Store Demo some functions will not work and the picture settings will be reset every gt 30 minutes LI Viewing the Contact Sam
14. er to customize sound setting for each speaker Balance L R Adjusts the balance between the right and left speaker 100Hz 300HZ 1kHz 3kHz 10kHz Bandwidth Adjustment Adjusts the volume level of specific bandwidth frequencies gt Reset Resets the equalizer to its default settings E Speaker Settings MENU Sound Speaker Settings ENTERC Speaker Select A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver In this case set the TV to External Speaker When Speaker Select is set to External Speaker the volume and MUTE buttons will not operate and the sound settings will be limited When Speaker Select is set to External Speaker you should use these settings e TV Speaker Off External Speaker On When Speaker Select is set to TV Speaker you should use these settings e TV Speaker On External Speaker ON e Auto Volume Normal equalizes the volume level on each channel so that when you change channels the volume level is the same Night equalizes and decrease the volume level on each channel so each channel is quieter Night is useful at night when you may want to keep the volume low To use the volume control on the source device connected to the TV set Auto Volume to Off on the TV Otherwise a change to the volume control of the source device may not be applied gt E Digital Audio Out MENU Sound Digital Audio Out ENTERC
15. erate correctly If there is only one photo file in the USB the Slide Show will not play A folder with a name that is too long cannot be selected Each USB device you use is assigned its own folder When using more than one of the same type of USB device make sure the folders assigned to each USB device have different names It is recommended that you use a USB memory stick and a multi card reader when using On Timer The On Timer function may not work with USB devices with a built in battery MP3 players or PMPs made by some manufacturers because these devices take a long time to be recognized e Off Timer You can set up three separate Off Timer configurations Off Timer 1 Off Timer 2 Off Timer 3 You must set the clock before you can use Off Timer Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual If you select Manual you can choose the days you want Off Timer to turn off your TV The v mark indicates days you ve selected Time Set the hour minute and am om Use the number buttons or the amp w gt buttons to enter numbers Use the lt gt buttons to change entry fields LI Economical Solutions M Eco Solution MENU System Eco Solution ENTERC e Energy Saving Lets you adjust the brightness of the TV in order to reduce power consumption e No Signal Power Off Off 15 min 30 min 60 min Sets how quickly the TV switches to standby mode if it is receiving no signal
16. ers USB HUB are not supported Devices should be connected directly to the TV s USB port gt Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss The HDD Hard Disk Drive connected to USB is not supported Do not disconnect the USB device while it is loading The higher the resolution of the image the longer it takes to display on the screen The maximum supported JPEG resolution is 15360 x 8640 pixels For unsupported or corrupted files the Not Supported File Format message is displayed The scene search and thumbnail functions are not supported in the Videos MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that supports the creation distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements A USB device that requires high power more than 500mA or 5V may not be supported If the TV has been no input during time set in Auto Protection Time the gt screen saver will run The power saving mode of some external hard disk drives may be released automatically when connected to the TV If a USB extension cable is u
17. he time from a digital channel You must have cable or an antenna connected to the TV to set the time automatically e Manual Set the current time manually Depending on the broadcast station and signal the auto time set up may not be correct In this case set the time manually Clock Set Set the Date and Time Select Clock Set Select Date or Time and then press ENTERL Use the number buttons or the 4 w buttons to enter numbers Use the lt gt buttons to move from one entry field to the next Press ENTERL when done Available only when Clock Mode is set to Manual You can set the Date and Time directly by pressing the number buttons on the remote control Time Zone Select your time zone This function is only available when the Clock Mode is set to Auto Q Using the Sleep Timer MENU System Time Sleep Timer ENTERC e Sleep Timer Ga Automatically shuts off the TV after a preset period of time 80 60 90 120 150 and 180 minutes Use the 4 w buttons to select a period of time and then press ENTERL To cancel the Sleep Timer select Off U Setting the On Off Timer MENUDO System Time On Timer lt or gt Off Timer ENTERC Set On Timer so that your TV turns on automatically at a time and on a day of your choosing e On Timer You can set up three separate On Timer configurations You must set the clock before you can use On Timer Setup Select Off Once Everyday Mon Fri
18. ites 1 Favorites 5 1 Go to Edit Favorites screen 2 Press the 4 w buttons to select the desired channel and then press lt ENTERL button 3 Choose a specific favorite list among Favorites 1 Favorites 5 using amp Change Fav button and then press the B Add button The selected channel has been added in Favorites 1 Favorites 5 One favorites channel can be added in several of favorites among Favorites 1 Favorites 5 Deleting a channel from the Favorites 1 Favorites 5 1 On the Edit Favorites screen select the favorite list using E Change Fav button 2 Move to favorite list and then select the desired channel you want to delete 3 Press the P Delete button The selected channel has been deleted from the Favorites 1 Favorites 5 If you want to change the favorite channel order press the EY Change order button and change the order using 4 w buttons Using the colored and function buttons with the Edit Favorites o Red Category Change order Category Changes the channel mode to Added Ch Recently Viewed Mostly Viewed The selected channel mode is displayed Change order change the favorite channel order e E Green Change Fav Changes favorite list among Favorites 1 5 Yellow Select All Deselect All Selects or deselects all channels at once e D Blue Add Delete Add Adds selected channels to Favorites1 5 Delete Delete a favorite channel from Favor
19. ites1 5 e Go To Goes to channel directly by pressing numbers 0 9 e gt Page Moves to next or previous page e xg_ Tools Displays the option menu The option menu items that appear may differ depending on the channel status and type Copy to Favorites Edit the selected favorite channel in Favorites 1 5 You can add or delete from favorite list Rename Favorites Assign your own favorite channel name Edit Channel Add or delete channels Information Display details of the selected program Q Blocking Programs E Program Rating Lock MENU Broadcasting Program Rating Lock ENTERC e Program Rating Lock Prevent unauthorized users such as children from watching unsuitable program with a user defined 4 digit PIN code The PIN input screen appears before the setup screen Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option E Channel Lock MENU Broadcasting Channel Lock ENTERC Lock channels to prevent unauthorized users such as children from watching unsuitable program The PIN input screen appears Enter your 4 digit PIN the default of which is O 0 0 0 Q Other Features E Channel Settings MENU Broadcasting Channel Settings ENTERC e Fine Tune analog channels only If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and store ope
20. ollowing sequence in Standby mode which resets the PIN to 0 0 0 0 MUTE 8 2 4 POWER on E General MENUDO System General ENTERC e Game Mode Off On When you have connected a game console such as PlayStation or Xbox to the TV you can enjoy a more realistic gaming experience if you set Game Mode on NOTE e Precautions and limitations for Game Mode Before disconnecting a game console and connecting another external gt device set Game Mode to Off If you display the TV menu in Game Mode the screen shakes slightly Game Mode is not available when you ve set the input source to TV e Set Game Mode to On only after connecting a game console If you turn Game Mode on before you have attached the game console you may notice reduced picture quality e f Game Mode is On Picture Mode is set to Standard and Sound Mode is set to Movie e Pane Lock Lock or unlock all the keys on the panel e Boot Logo Display the Samsung logo when the TV is turned on lt e AV Color System Normally the TV can receive image and sound with good p quality when in the mode Auto This mode detects the signal color system automatically In case of some signal reception with color unsatisfactory select the AV Color System Mode to PAL M PAL N or NTSC Available only in AV mode E DivX Video On Demand MENUDO System DivX Video On Demand ENTERL Shows the registration code auth
21. on about e Manual Screen refer to How to view the e Manual in the User Manual LI Using the Self Diagnosis E Self Diagnosis MENUDO Support gt Self Diagnosis ENTERC e Picture Test Use to check for picture problems Picture test displays a high definition picture that you can examine for flaws or faults Yes Select Yes if the test picture does not appear or there is noise or distortion in the test picture There may be a problem with the TV Contact Samsung s Call Center for assistance gt No Select No if the test picture displays properly There may be a problem with your external equipment Please check your connections If the problem persists refer to the external device s user manual e Sound Test Use to check for sound problems Sound test plays a built in melody that tests both speakers If you hear no sound from the TV s speakers before performing the sound test make sure Speaker Select is set to TV Speaker in the Sound menu The melody will be heard during the test even if Soeaker Select is set to External Speaker or the sound is muted by pressing the MUTE button Yes Select Yes if you can hear sound from only one speaker or from neither speaker during the sound test There may be a problem with the TV Contact Samsung s Call Center for assistance No Select No if you can hear sound from the speakers There may be a problem with your external equipment Please check your connections If th
22. orized for the TV If you connect to the Divx web site and register with 10 digit registration code you can download the VOD activation file Once you play it using Media Play the registration is completed For more information about DivX VOD visit http vod divx com Q Using the Source List E Source List MENU Applications Source List ENTERC When you press the SOURCE button Source screen will be displayed at once You can only choose external devices that are connected to the TV In Source connected inputs are highlighted For the detailed information refer to Changing the Input Source in User Manual lt Q Connecting a USB Device 1 Turn on your TV 2 Connect a USB device containing photo music and movie files to the USB port on the side of the TV 3 When USB is connected to the TV popup window appears You can select the Photos Videos or Music directly It might not work properly with unlicensed multimedia files d Need to Know List before using Media Contents MTP Media Transfer Protocol is not supported The file system supports NTFS Read Only FAT16 and FAT32 Certain types of USB Digital camera and audio devices may not be compatible with this TV Media Contents only supports sequential joeg format Media Contents only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash Card Read
23. ranged in up to five groups Each group has a separate screen The TV displays Favorites 1 Favorites 5 only if you have added favorites using Edit Favorites e Added Ch Show all added channels E Guide MENU Broadcasting Guide ENTERC The EPG Electronic Program Guide information is provided by broadcasters Using program schedules provided by broadcasters you can specify programs you want to watch in advance so that the channel automatically changes to the selected program channel at the specified time Program entries may appear blank or out of date depending on a channel status e FY Red Quick Nav Viewing the TV programs on the list quickly using lt gt buttons e EJ Green Channel category Select the type of channels you want to display Yellow Schedule Manager Moves to the reserved programs in Schedule Manager M Schedule Manager MENUO Broadcasting Schedule Manager ENTERC You can set a desired channel to be displayed automatically at the intended time In addition you can view modify or delete a channel you have reserved to watch You must set the current time first using the Time Clock function in the System menu to use this function 1 Press the Schedule on the Schedule Manager screen The Schedule Viewing menu appears 2 Press the amp w 4 gt buttons to set each option menu e Antenna Select the desired broadcasting signal e Channel Select the desired channel
24. ration If the signal is weak or distorted fine tune the channel manually gt Fine tuned channels that have been saved are marked with an asterisk on the right hand side of the channel number in the channel banner To reset the fine tuning select Reset e Color System analog channels only Normally the TV can receive image and sound with good quality in Auto mode This mode detects the color signal sources automatically If the color implementation is unsatisfactory select any of PAL M PAL N or NTSC MH Auto Run Data Service MENU Broadcasting Channel Settings Auto Run Data Service ENTERL4 Turn the Data Service Auto Run on or off If Auto Run is turned on data service starts automatically with no user prompt Enabling certain features of your system may prevent Data Service Auto Run from running This function is only available for LT24D310LBG ZB E Caption On Screen Text Messages MENU Broadcasting Caption ENTERC e Caption You can switch the caption function on or off If captions are not available they will not be displayed on the screen The Caption feature does not work with devices connected to the TV through the Component HDMI input jacks or D Sub e Caption Mode You can select the desired caption mode The availability of captions depends on the program being broadcasted CC1 CC4 Text1 Text4 analog channels only The Analog Caption function operates in either an
25. reen Fit When your TV inputs HDMI 720p 1080 1080p or Component 10801 1080p signals displays the full image without any cut off e Position Adjusts the picture position Position is only available if Picture Size is set to Zoom1 Zoom2 Wide Fit or Screen Fit To use the Position function after selecting Zoom1 Zoom2 Wide Fit or Screen Fit follow these steps 1 Select the Position and then press the ENTERL button 2 Select the Position button and then press ENTERL button 3 Press the 4 w button to move the picture up or down 4 Press the ENTERL4 button b gt If you want to reset the pictures to its original position select Reset in the Position screen and then press ENTERL4 The picture will be reset to its default position To use the Position function after selecting Screen Fit when connected to A O N S an HDMI 1080i 1080p or Component 1080i 1080p source follow these steps Select the Position and then press the ENTERL button Select the Position button and then press ENTERL button Press the amp w 4 gt button to move the picture Press the ENTER C4 button If you want to reset the pictures to its original position select Reset in the Position screen and then press ENTERL The picture will be reset to its default position HD High Definition 16 9 1080i 1080p 1920x1080 720p 1280x720 You can adjust and store settings for each external device you have conne
26. ress ENTERL4 When connecting a PC you can only make changes to the White Balance and Gamma gt Dynamic Contrast Adjusts the screen contrast Black Tone Select the black level to adjust the screen depth Flesh Tone Emphasizes pink Flesh Tone e RGB Only Mode Displays the Red Green and Blue color for making fine adjustments to hue and saturation e Color Space Adjusts the range of colors the color gamut available to create images Adjust Auto and Native to set Color Space e White Balance Adjusts the color temperature for a more natural picture 2 Point Adjust each color s luminosity with the offset menu and the brightness with the gain menu gt R Offset G Offset B Offset Adjusts each color s red green blue darkness R Gain G Gain B Gain Adjusts each color s red green blue brightness Reset Resets the White Balance to its default settings e Gamma Adjusts the primary color intensity e Motion Lighting Reduces power consumption by reducing screen brightness when the picture on the screen is motionless When you change the Backlight Contrast or Brightness the TV sets Motion Lighting to Off Only available in Standard mode E Picture Options MENUDO Picture Picture Options ENTERC Select an option using the 4 amp w 4 p gt buttons and then press ENTERL4 When connecting a PC you can only make changes to Color Tone e Color Tone Warm1 or Warm2 will be dea
27. sed the USB device may not be recognized or the files on the device may not be read If a USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection If a file deleted from the PC is still found when Media Contents is run use the Empty the Recycle Bin function on the PC to permanently delete the file If the number of files and folders saved on a USB storage device is approximately over 4000 the files and folders may not appear and some folders may not be opened Disconnecting a USB Device 1 Press the SOURCE button 2 Select a desired USB device and then press the TOOLS button The Tools menu appears 3 Select Remove USB and then wait until the selected USB device is disconnected You can remove a USB device from the TV To remove a USB device from the TV we recommend use Remove USB function Q Using the Media Contents MENU Applications gt Media Play ENTERC Enjoy photos music and movie files saved on a USB Mass Storage Class MSC device 1 Press the MEDIA P button 2 Press 4 gt button to select desired menu then press the ENTERC4 button 3 Press lt gt button to select desired device then press the ENTERC button again 4 Press the amp w 4 P button to select the desired file in the list then press the ENTERL button or gt Play
28. sung E Contact Samsung MENUDO Support Contact Samsung ENTERC View this information when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centers and how to download products and software
29. t play the Game itself e Supported Subtitle Video Formats For the details refer to Specifications in User Manual e Music Repeat You can play music files repeatedly Shuffle You can play the music randomly a Sound Mode You can adjust the sound setting Only displays the files with supported music file extension Other file extensions are not displayed even if they are saved on the same USB device lt gt If the sound is abnormal when playing music files adjust the Equalizer in the Sound menu An over modulated music file may cause a sound problem Operation e Supported Music Formats For the details refer to Specifications in User Manual Setting the Encoding language Set the encoding language if the text is not Supported 1 Press the amp button to select Options at the top of music main screen and select Encoding 2 Select the desired encoding language Q Using the Soccer Mode E Soccer Mode MENU Applications Soccer Mode ENTERC This mode provides optimized condition for watching sports games When the Soccer Mode is On the picture and sound modes are set to Stadium automatically If you turn the TV off while watching Soccer Mode the Soccer Mode will be disable LI Viewing the e Manual E e Manual MENUDO Support gt e Manual ENTERC You can read the introduction and instructions about the TV features stored in your TV For the detailed informati
30. tion buttons with the Edit Channel e E Green Delete Add Delete Deletes a channel from the channel list Add Adds a deleted channel It only appears when you select the deleted channel in All Yellow Lock Unlock Lock a channel so that the channel cannot be selected and viewed This function is available only when the Channel Lock is set to On The PIN input screen appears Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option BP Blue Select All Deselect All Selects or deselects all channels at once Go To Goes to channel directly by pressing numbers O 9 Page Moves to next or previous page a Tools Displays the option menu The option menu items that appear may differ depending on the channel status and type Antenna Select the desired broadcasting signal Category Change the channel mode to All Added Ch Recently Viewed Mostly Viewed The selected channel mode is displayed Edit Favorites Go to Edit Favorites screen directly Rename Channel analog channels only Assign a name of up to five characters to a channel For example Food Golf etc This makes it easier to find and select the channel Information Display details of the selected program E Edit Favorites MENU Broadcasting Edit Favorites ENTERC You can add edit or delete favorite channels Adding a channel to the Favor
31. tting g Settings l o Information You can see detailed information about the played file During the slide show all files in the file list will be displayed in order When you press the gt Play button or amp button Options Slide Show in the file list slide show will be started immediately During the slide show you can adjust the slide show speed using lt lt REW or gt gt FF button e Supported Photo Formats For the details refer to Specifications in User Manual e Videos Q Search Operation Search Titles You can move the other file directly Search Time bar You can search the video using 4 and button at one minute interval or entering the number directly It may not be supported depending on the input source Repeat Mode You can play movie files repeatedly Picture Size You can adjust the picture size to your preference 0o Subtitle Settings You can play the video with subtitles This function only works if the subtitles are the same file name as the video Picture Mode Sound Mode You can adjust the picture or sound g Settings setting Audio Language You can change the audio language if the video has more than one language Information You can see detailed information about the played file If video time information is unknown play time and progress bar are not displayed In this mode you can enjoy movie clips contained on a Game but you can no
Download Pdf Manuals
Related Search