Instruction Manual
Contents
1. 1 32 UN Note C mount lenses are applicable as well when using a 5mm spacer C CS mount adapter Mounting a CS Mount Lens Remove the protective cover from the lens mount If a C mount lens is used mount a 5mm spacer C CS mount adapter ring between lens and camera Screw the lens on the camera Do not allow any dust to enter the space between the lens and the CCD element if necessary blow it away with clean air Adjust the back focus distance as described below if using CS Mount Aim the camera and focus the lens to the object or area to be observed If a manual iris lens is used adjust the iris for better picture quality A large aperture gives the best light sensitivity a small aperture the largest depth of field Back Focus Adjustment CS Mount Set the lens focus ring if present to infinity and the iris ring if present to it s maximum opening Aim the camera at an object at a distance of at least 15 meters 45 feet Loosen the back focus locking ring at the front of the camera by turning it counter clockwise Rotate the lens including the CS mount ring until the picture on the monitor is sharp Keeping the lens in place tighten the back focus locking ring by turning it clockwise Note If the lens to be backfocused is a board or pinhole lens then the set screw of the lens mount should be loosened to adjust and tightened to lock 7 Iris Control Fixed Shutter The exposure time of the CCD2. User Manual Color Camera Module Models 20K155 20K158 20K152 21K155 21K158 21K152 VIDEOLOGY IMAGING SOLUTIONS INC s 1 This package contains Color camera module Connection cable User manual 2 Features Selectable Through Software Manual gain control Back light compensation Selectable shutter modes Gamma on off Mirror mode on off 3 Power The camera module must be powered with a DC power source Regulated 5V DC 5 Nominal Note 5V DC REGULATED Do Not Reverse Polarity Connect to Consumption lt 0 8W Precautions Never aim the camera at the sun or other extremely bright light sources Whether in use or not exposure to extremely bright light sources may harm the CCD image sensor or may cause smear on the picture Do not operate the camera beyond it s temperature or power source ratings The valid operating temp should fall between 15 C and 55 C Do not use power sources which exceed the specified values 3 Cleaning the sensor Avoid unnecessary exposure of the sensor to dust If the surface of the sensor has to be cleaned never use any cloth tissue or brush and strictly avoid the use of any kind of cleaning fluid Only use dry air to blow particles from the surface of the sensor 5 Output Video CVBS 1 Vp p 75 ohms is available at J3 Pin 3 6 Lenses 20K155 21K155 20K152 21K152 Pinhole Lens mount M 12 Thread 20K158 21K158 Standard CS mount
3. d Non Interlaced selectable via Software Selectable via software Internal Default on selectable via software AWB auto white mode Fixed modes selectable via software Default on CCD Iris default Automatic from Automatic from 1 60 to 1 100 000 1 50 to 1 100 000 8 fixed speeds via software Composite 1Vp p CVBS 75 ohms IC control 5VDC 5 not polarity protected lt 0 8 W 15 to 55 Celsius 20 up to 93 RH 25 to 70 Celsius Up to 98 RH MTBF gt 150000 ESD safe package 22mm x 26mm x 25mm without lens Metal CS 20 21K158 Metal M 12 board 20 21K155 Metal M 12 pinhole 20 21K152 Power Video Communication 6 pole mate for power and video with flying leads 6 pole Board connector Model 60K1 Communication board 72V0012B Cable 1 Camera com board 60C1045 Cable 2 Com board to 25 pin computer connector 60C0102 Camera control software SFT 03001 Standard resolution CVBS Blanking pulse access S Video Y C YUV 8 Bit digital output USB 2 0 Day Night color board camera High resolution 490TVL S Video Y C High resolution YUV 8 Bit digital output
4. is automatically controlled by electronic iris control 8 Synchronization The camera produces it s own internal synchronization 9 Connectors J2 6 pin Pin 1 5V DC Pin 5 12C CLK Pin 6 I2C Data Note 5V DC REGULATED Do Not Reverse Polarity Connect to For more information regarding Digital Output Camera Control and Communication please download appli cation note on www videologyinc com 20K15X 6 Pin Backside J2 pad connector 10 Technical Specifications Electrical CCD Sensor Active pixels HxV Horizontal resolution TVL Sensitivity Signal to noise ratio Gamma Gain Control Scan Mode Mirror Mode Synchronization Back light compensation White Balance Mode Contour enhancement Iris Control Shutter Speeds Video output Control Communication Power supply Power consumption Environmental Ambient operating temp Ambient operating Humidity Storage temp Storage Humidity Lifetime Packaging Mechanical Dimensions LxWxD Lens mount Connectors Standard Cables Supplied Accessories Communication kit Includes Complementary Models 20K14X 20K14XCB 20K14XYC 20K14XDIG 20K14XUSB 20K14XDN 20K15XYC 20K15XDIG 09 28 04 INS 20K15X Rev B 20K15X 21K15X NTSC PAL 1 4 IL CCD 768 x 492 765 x 582 gt 460 TVL lt 1 0 gt 48 dB AGC off 0 45 default 1 0 via Software Automatic 36 dB AGC default or Fixed options via software Interlace
Download Pdf Manuals
Related Search