Home

Maptech

Contents

1. L KEZAR FALLS 43070 Mja EJI i rezar FALLS NE 43070 G0 02 PHT ee SEBA SAA AOS AA 12000 1414 Am 9 Jo click and drag to move map Shift Zoom Cul Stitt Cirt Center Tool OO Terrain Navigator Pro can display two map windows at once This lets you look at two separate geographic areas or two map scales for the same area or a topo map and an aerial photo both on the screen at the same time You can also view two copies of the same map at different zoom levels Opening a Second Map Window To enter Two Window Mode you can click Window gt Two Window Mode or you can use the buttons found in the Compass Bar on the left side of the screen These three buttons let you switch between One Window Mode Two Window Mode and Two Window Mode Locked m One map window standard mode Two map windows Both windows can be panned independently to show different geographic locations Bt t Two map windows locked on the same lat lon Panning the map in one window automatically moves the second map accordingly to show the same location Zoom level and map scale may be adjusted as desired Whenever a second map window is opened it automatically shows the same view as the first window Once the second window Is open you can adjust settings like zoom level and map scale separately for each map window and set the second window to show a different area except when the windows are
2. Cancel Add Delete Help Use Bookmarks to keep track of specific locations so you can easily return to them later Campground Erin s Farm When you create a bookmark Terrain Navigator Pro memorizes your location zoom level and map scale To set a bookmark click View gt Bookmark this View then type a name for the bookmark The coordinates shown in this window represent the point at the center of your screen To return to this map view later just click Find gt Bookmark and select the name of this bookmark from the list provided You can create up to 16 bookmarks per map At the bottom of the Find menu is a list of the most recent map locations that you Found that is that you brought into view using the Find menu You can use this list for quick access to recently visited maps Seamless Single Map View Terrain Navigator Pro provides two different modes for viewing maps Single Map View and Seamless View Lar ROAD LEGEND Improved Road 2 02 00 02 ee een eneede A a Unimproved Road coocococcco o QUADRANGLE LOCA THEN TFE ee ee ee A ee ee ee In Single Map View the map window contains a single USGS map in its entirety The white map 12 collar with its printed data map title scale date etc is included in the image While in Single Map View you can use the Adjacent Map Control located on the left side of your screen to switch to any adjacent map Th
3. To return to regular 2 D map view just press the 3 D toggle button again pth a 3 D Rotation Video Clip You can record an AVI video file of any 3 D landscape shown in 360 rotation These video clips are useful for presentations etc To record a video clip 26 1 Find the location you want and enter 3 D View 2 Adjust viewpoint angle and zoom level to the desired settings 3 Press the Video button on the 3 D control bar or click File gt Export gt Rotation Video Clip 4 Assign a name to your video file and specify a location to save it Press OK The landscape will start rotating and video recording will begin In a few moments the AVI animation will be completed and saved under the file name that you specified You may then insert the AVI file into other programs presentations e mail etc Recording a 3 D Route Video Clip VIEN Clip Details Duration of frames fao Camera Height f 000 ft above Ground El Camera Tilt jo deg Down Frames per second mea Camera Heading Follow route line with offset of jo deg Latitude E 54 3 66 pu Frame size Medium Longitude a Alea 21 6 j w Options Bank camera on tums Smooth view when turming tilting F Show route on map Cancel Help Terrain Navigator Pro lets you record 3 D animation files showing the landscape along a route as seen from an adjustable camera height and angle The imagin
4. Place at point clicked If the file s have a time date stamp and if you have a GPS track recorded Place at matching time ontrack during the same timeframe you can drop them directly onto the track For Place earliestiile at point clicked position subsequent files at example If you go on a hike and relative time intervals along the track record your progress as a GPS track log and use your digital camera to take photos along the way you can upload the track log and the photos ea Help to Terrain Navigator Pro The photos may be placed as GeoPins along the track line at the locations where they C Spread all files evenly along the track were taken Place at point clicked Terrain Navigator Pro will create a GeoPin at the location where you clicked on the track line If you re dropping multiple files they will all be stacked at this location use the drag tool to separate them Place at matching time on track As long as the file s time stamp is contained within the time bracket when the track was recorded the file will be placed on the portion of the track that was recorded at the same time the file was created If no track point matches the file time exactly the file is placed in relation to the closest match Note This option will not be available if the file s time date stamp does not fall within the timeframe of the track Place earliest file at point clicked position subsequent files at relative time intervals alon
5. This option will appear grayed out unless User Defined Area has been chosen NGS National Geodetic Survey If you would like to create a file containing National Geodetic Survey data pertaining to the exported map specify Data Type here The optional settings under Extract filter the data to be included in the NGS data file Quality Three settings are provided for adjusting the quality of the reprojection low medium and high 98 When speed is more important than precise detail low or medium quality settings are useful for faster export Clipping Original view of map area to be exported Two Point Clipping The dotted line shows the resulting area of an export done with two point clipping at the NW and SE corners of the original map area Reprojection often produces a rotated image rotation is emphasized here for demonstrative purposes Four Point Clipping The resulting area of four point clipping export Because of necessary rotation when reprojecting the map image the X value of the NW corner of the exported image may differ from the X value of the original s NW corner When projecting into UTM you may wish to consider using two point clipping Exports produced by four point clipping are easier to seam together as two point clipping may clip off a desired portion of the map image Area Three options are available for determining the map area to export Entire Map Check this to export the entire map im
6. ff 138 43 7576583 071 2701399 Tent site Tntst ff 111 Converting Latitude and Longitude to Decimal Degrees This sample file contains data for five markers The first marker is named Cottonwood and is located at latitude 43 7601389 N longitude 071 2791299 W The coordinates are given in decimal degrees For latitude North is a positive value and South is a negative for longitude East is positive and West is negative You can convert from degrees minutes seconds with the following formula Conversion Formula Degrees Minutes divided by 60 Seconds divided by 3600 Decimal Degrees Express this as a formula and you get D M 60 S 3600 decimal degrees For example a latitude of 43 degrees 30 minutes 50 seconds would translate to 43 30 60 50 3600 43 5138888 decimal degrees Here s the math 30 60 0 5 50 3600 0 0138889 00 0138889 00 5000000 43 0000000 109 43 5138888 The next two values in the line are the full name and the GPS Name of this marker Following is a space for the marker comment if any in this case A very large tree The field after the comment contains a number specifying the color of this marker The next number refers to the symbol selected for this waypoint within Terrain Navigator Pro The symbols are numbered in the same order they appear under Symbols in Edit Markers window starting with O for none the first option in the list The numeric codes for th
7. historical Place Zeacliff Trail Place Zeacliff Pond Bet TER ia ee qn al reeley Ponds Scenic rea Place zion Hill Penacook Stream Greeley Brook Cowen Hill LatiLong CRAWFORD NOTCH Stream Greeley Brook Waterville Valley Trail Greeley Ponds Trail Red Circle Indicates Location All ltems Found Nearest 15 A red circle is drawn around the location you searched for To remove the circle click on it m Help Tips To sort the search results by proximity click Nearest 15 This will shorten the list to the 15 locations nearest to the map area you re already viewing and give you the distance to each location Of course the Nearest 15 option is unavailable if you aren t already viewing a map Click All Items Found to return to the complete results list which covers the entire CD region If you don t want to limit your search to a specific category you can search all categories click Find gt Search All Placenames and type a word or even just a few letters to search for The bottom portion of the Find menu shows the last five places you located using this search function This is handy for returning to a recently visited map If you can t find the place you re looking for make sure the correct CD region is specified click File gt Change CD 11 Bookmarking Locations Define Edit Bookmarks O ol Mame Tamaracks Latitude Jag e 427 a IN Longitude HE as 20 57 dd w
8. might want to try specifying a similar model produced by your manufacturer lf the two models are internally similar you may be able to establish successful communication with Terrain Navigator Pro Trial and error is the only way to determine whether this will work If your manufacturer is not listed you will not be able to transfer stored coordinate data This means that you won t be able to send or receive waypoints routes or track logs between your GPS and Terrain Navigator Pro If you have a laptop computer that you travel with you can probably still connect your GPS to perform realtime GPS tracking Driver Notes Additional Settings Within Your GPS Unit The right side of the GPS Setup window contains Driver Notes specific instructions for using Terrain Navigator Pro with your particular GPS make and model IMPORTANT Be sure to read and follow these instructions These Driver Notes often contain vital information necessary for successful connection The Driver Notes section will tell you whether there are any additional settings you need to configure within your GPS unit Datum In many cases you ll find that the Datum setting is unavailable grayed out This is because Terrain Navigator Pro has automatically detected what datum your GPS is set to and taken care of this setting for you If the Datum setting ISN T grayed out you must set the Datum here in the GPS Setup window to match whatever datum your GPS unit i
9. over the profile to get readings for that location Press Print to print the profile graphic press Export to save it as a BMP image Data Provided Total Distance The distance of this line without regard to elevation changes as though you were following the route in an airplane For example two hills with a valley between them might really be two miles apart in total distance even though traveling between them on the ground might be a journey of two and a half miles ground distance Ground Distance The ground distance between the starting and ending points taking elevation changes into consideration This is the actual distance you would walk if you followed this route on foot For example two hills with a valley between them might really be two miles apart total distance but to travel between them on the ground might be a journey of two and a half miles ground distance Climbing This is the sum of all the ascending portions of this path Every upward slope is counted towards this figure even if there are downward portions that counteract these temporary elevation gains This figure gives you an idea of how much of your actual movement will be uphill Compare this figure to the Descending figure for a good idea of how hilly a trail will be Descending This is the sum of all the descending portions of this route Every downward slope is counted towards this figure even if there are upward portions that counteract these tempor
10. 34 Superimpose your own custom grid on maps photos Adjust the size and shape of grid rectangles to suit your purpose Grid may be based on the coordinate system you re using or measured against magnetic North Page 22 Waypoint creation by Public Land Survey System PLSS bearings Page 82 GPS Position Averaging feature helps maximize accuracy when marking single locations Page 68 Automatic GeoPin placement based on time date stamp Drag and drop files with a time date stamp directly onto a GPS track Files will attach themselves chronologically to the track based on the time the track points were recorded Page 49 Flexible printing options let you specify exact scales more easily and define margins for the printed page New optional scale bar graphic may be included on printouts Page 93 Track appending lets you connect multiple tracks to form a single line Page 90 Additional export formats let you save your coordinate data in GPX or GEN format Optional locking of windows in two window mode A new mode button allows you to lock both windows on the same geographic area and scroll them simultaneously Page 21 New fill options for looped routes and tracks Create buffer zones at specified widths Page 79 New in 6 x If you re upgrading from a pre 6 0 version of Terrain Navigator or Terrain Navigator Pro here are some of the major new features you ll notice Maps View Download Aerial Photos Your purchase entitles
11. 46 for details 80 Delete Deletes the highlighted waypoint Reverse Reverses the order of waypoints so that the last waypoint will be first in the sequence This is useful for returning to your starting point If your GPS unit doesn t have a Reverse Route feature you can reverse your routes here and send them to your GPS Adding a New Waypoint In the Edit Route Waypoints window press New to add a waypoint to the END of your route Why use this method Toadd an existing marker as a waypoint in your route or To add a new waypoint at specific coordinates If you want to insert new waypoints in the middle of your route instead of at the end you can simply add new waypoints by clicking on the map see page 77 If you want to insert an existing marker into the middle of your route you can do this by adding a new route leg see page 83 Adding an Existing Marker as a New Waypoint To take a marker that s already present on the map and add it as a waypoint at the END of your route click the drop down arrow next to the Name blank This will present a list of all your markers Choose the one you want to add to your route Creating a New Waypoint by Typing Coordinates To create a new waypoint completely from scratch fill in all the blanks in this window including coordinates Changing Symbol Color To edit the symbol and or color for this new waypoint press OK to return to the Edit Waypoints window 81 Editing
12. Area choose Small If Your 3 D Display is Still Not Working Terrain Navigator Pro s 3 D View performance is limited to the capabilities of your video card If you have followed all instructions above you have done everything possible to ensure that Terrain Navigator Pro s 3 D View is operating at the maximum performance level provided by your computer system The same principle applies to your favorite computer games their special effects are likewise powered by your video card If Terrain Navigator Pro s 3 D performance is slower than you d like you will most likely encounter the same limitations when running a computer game with complex graphics display Remember to keep an eye out for updated video card drivers so that you can take advantage of any future driver improvements 32 Working with Layers About Layers The term ayer refers to anything added to the map image For example Terrain Navigator Pro includes a Benchmark layer with symbols for all NGS benchmarks in your CD region s You can create other layers yourself including annotations GeoPins and Labels GPS related data Markers Routes and Tracks and measurement tools Range Rings Range Bearing Lines and the Distance Tool All of these layer types are discussed in detail later in this document The following section deals with general characteristics common to all Layers and explains how to use them most effectively in Terrain Navigator Pro Layer Vis
13. Close Prefix Trk Default Name The Default Name is what Terrain Navigator Pro will automatically fill in for the starting text of your track names You have three choices Text Lets you assign a standard name prefix in the spaces at right When you first start using Terrain Navigator Pro the Default Name is set to Text with Trk to be used as the prefix for all new tracks You can change or remove this prefix as you wish Date Time You may choose to automatically start your track names with either Date or Time Since Date or Time serves as a prefix no additional prefix space is available 91 Reset Numbering Tracks are automatically numbered to ensure that all track names are unique If you like you can Reset the numbering to start again at 1 but keep in mind that this may result in duplicate track names For example if you already have a Trk8 and you reset numbering you could end up with two tracks that are both named Trk8 Line Color Sixteen colors are available Style Choose from a variety of dotted dashed or solid lines You may also opt to use a symbol Several symbols are available The symbol you choose will be placed at intervals along the track line Width Width of the track line Highlight If you like you may apply highlighting to your rack lines Choose from nine colors Fill When a track is looped the enclosure that it forms will be filled with the Pattern and Color tha
14. Interval The amount of elevation change between adjacent contour lines 116 Year Created The year that the USGS first produced this topographic coverage for this area Revised Inspected The USGS periodically reviews areas it has mapped and if necessary modifies its original topographic coverage to reflect any new changes in the shape of the terrain The date of a map s inspection or revision is given here it can also be found along the bottom of most USGS topos Coordinates The coordinates of the location where you clicked on the map with the Information Tool Benchmarks Terrain Navigator Pro includes a Benchmark layer with benchmark icons on the maps and National Geodetic Survey NGS data sheets for each benchmark To view the NGS data sheet for any benchmark click on the benchmark icon using 3 the Information Tool A You can then Print the data sheet or Copy it to your Windows Clipboard and paste the data sheet into most Windows applications for example open Microsoft Word and click Edit gt Paste to view the data sheet NGS data sheets may also be included when exporting maps see page 97 To show hide benchmark icons use Layer Visibility page 33 Information National Geodetic Survey BPetrieval Date FEBRUARY 1 002 PRELILGAS ae to ea te Se Se aa te ae Ss te sete ts aa Solas Ss ae Soi te Ss OT Sol ne Se ee Sel te te eel Sel ae So DT Sel te DT ea Ge ae Se Ge Sel ne So tel Se aa DT OT Ss ae Ss
15. Route Legs O wapone Legs Properties Campsite to Logging trail Logging trail to Brook Azimuth C Quadrant Brook to Keating Falls Keating Falls to Boulder Bearing f 20 Degrees Leanto to Distance f 392 479 Feet Boulder to Leanto Calor Style width Highlight Mew Delete Reverse seo In addition to editing individual waypoints you may also edit the legs or segments of a route A route leg is the segment between two waypoints In the Route Edit window highlight a route and press Edit then at the top of the window select Legs This window tells you the distance and bearing from each waypoint to the next Highlight a route leg in the list at left to view or edit its characteristics Bearing The direction of this leg At the top of the window you can select Azimuth the default setting to assign directions from 0 to 360 degrees or Quadrant to assign directions based on Public Land Survey System PLSS quadrants To specify whether your bearings should be measured from Magnetic North or True North click File gt Preferences gt General Distance The length of this leg To change the units of measurement click File gt Preferences gt General Color Sixteen colors are available If you wish you may specify a different color for each leg of your route Style Choose from a variety of dotted dashed or solid lines You may also opt to use a symbol the sy
16. al Sa Ra Ge ae Se te DT a Sa tel Gal a Sel se aT Ss FEll3 2 DESICNATION zZz 165 PE1132 FID PEll3 PEllig2 STATEsCOONTY ME EKENNEEEC PE1132 USCS QUAD READFIELD 1980 PRELI32 PELIS2 CURRENT SURVEY CONTROL PRELI32 PELIsS2 NAD 83 1966 44 3 22 HM 069 53 31 CW SCALED PRELI32 WAVED SS 97 227 meters 315 99 feet ADJUSTED PELIS2 PElliz2 GEOID HEICHT 275 96 meters GEOIDSS PE1132 DYNAMIC HT 37 219 meters 215 56 feet COMP PRE11I32 HODELED CHAY 950 536 6 mal NAVD 35 PE1132 OBS GRAVITY 980 532 4 ingal GRAV OBS PRELI32 PE1132 VERT ORDER FIRST CLASS I PRELI32 PELIS2 The horizontal coordinates were scaled from a topographic map and have PELIS2 an estimated accuracy of r 6 seconds PE113Z PEl132 The orthometric height was determined by differential leveling PELIS2 and adjusted by the National Geodetic Survey in June 1991 PEL1S2 cy rim 117 Datum What is datum Simply put datum is a model used for calculating the location of the Earth s center This center calculation is used as a reference point in establishing coordinate locations like latitude longitude on the Earth s surface Why does it matter There are many different datums A coordinate location calculated using one datum may differ by several hundred feet from the same coordinates calculated from another datum Therefore before relying on coordinate location information it is important to know wha
17. already have a Mrk3 and you reset marker numbering you could end up with two markers named Mrk3 Create Locked You can lock individual markers in place on the map by right clicking the marker and choosing Lock Marker Locking prevents accidental moving of markers Check the Create Locked checkbox here and all your markers will automatically be locked upon creation You can still unlock them individually by right clicking the marker and choosing Unlock Marker Keyboard Shortcuts Ctrl E Opens Edit Markers window Del Delete Current Marker Delete Button on Toolbar Delete Current Marker Right Click on a Marker Editing Options Double Click on a Marker Edit This Marker Ctri A Place marker at GPS location during Tracking 76 Routes Creating Routes A route is a path of travel along a series of definite points The points along the route are called waypoints To create a route on the map select the Route tool from the toolbar and click on the locations where you want to set waypoints Waypoints are represented by symbols and are automatically assigned names and numbers As you create waypoints the waypoints are joined in sequence by a line Each line segment is called a route leg When you have finished press the Route toolbar button again or right click on the map and choose Finish Route This will save your route on the map Tip Hold down the Control key on your keyboard to temporarily switch the cursor bac
18. also thoroughly read your GPS user s manual and familiarize yourself with storage functions of your GPS unit before attempting any data transfers After you send routes to your GPS your route data will still be retained within Terrain Navigator Pro To edit or delete routes in Terrain Navigator Pro click Layers gt Routes Tracks Send Track Log As you may know a GPS unit may be used to record a track log a collection of subsequent position readings which together form a record of your movement over terrain These track logs may be transferred into Terrain Navigator Pro where they are displayed as lines on the map You can also create tracks by hand on the maps in Terrain Navigator Pro and send these tracks to your GPS unit Track logs Logging trail Mt Desolation Munn Pond Perimeter Sled dog trail TBE Click GPS gt Send to GPS gt Send Tracks and amen pa Help Terrain Navigator Pro will display a list of all Cancel Hep available tracks Highlight the track s you wish to send to your GPS Use the Shift or Control key to make multiple selections Shift to select several tracks in a row or Control to single out specific tracks to send Understand Your GPS Unit s Track Storage Options Before sending tracks to your GPS be sure that you know how your GPS unit handles track log storage Number of track logs Find out how many track logs your GPS unit can store Some GPS units can only store one tra
19. button choose Programs Accessories Communications HyperTerminal The HyperTerminal program will start If you do not have HyperTerminal installed see below for installation instructions 4 Ifa window comes up asking if you want to configure a modem now answer No or Cancel 5 The Connection Description window should now appear Type Test for the connection s Name and press OK 6 The next window is the Phone Number window For Connect Using select Direct to COM1 and press OK In COM1 Properties change the Bits per Second from 2400 to 4800 since the NMEA 0183 standard specifies 4800 baud rate and press OK At this point one of three things can happen A You get an error message This means that the COM port you have selected is either unavailable or is not functioning properly You may have inadvertently specified the wrong COM port name Close HyperTerminal and repeat the procedure trying a different COM port this time If you are sure that you are selecting the proper COM port and calling it by its correct name that COM port may be defective Contact your computer manufacturer for further troubleshooting tips B You get a blank screen with a flashing cursor This means that the COM port you have chosen is not receiving NMEA data Close HyperTerminal and repeat the process trying a different COM port If you are certain that you are selecting the proper COM port contact the manufacturer of your computer or GPS unit for fu
20. change the reference waypoint press Cancel to return to the Route Waypoints window then highlight another waypoint to use as a reference point and press the New button again to start over Insert Before After New Route Leg Be a x Hame Full Hame Northeast Ledge GPS Name LEDGE Comments Nice overlook of valley Reference Waypoint Brook Crossing Insert Distance Bearing E Before F After le From To Bearing 170 Distance f 20i Feet Cancel Help Degrees Choose where your new waypoint should be inserted in the route before or after the reference waypoint Distance Bearing From To Specify whether the new location is measured from the reference waypoint or to it Then enter the bearing and distance in the blanks at the bottom of the window You can specify bearings using azimuth measurements or PLSS quadrants make this selection in the Edit Route Legs window page 82 before you press the New route leg button Be sure you have set Terrain Navigator Pro to use your preference of Magnetic or True North this setting is found in General Preferences Example If you want to place the new waypoint 800 feet due east of the reference waypoint you could specify a Bearing of 90 degrees True FROM the reference waypoint and specify 800 feet for Distance On a north up map such as most USGS topos this would position the new waypoint to the right east of t
21. click the Finish Track button to the right of the elevation display on the toolbar You can also save a track by pressing the Track Tool button again or by right clicking on the track line and choosing Finish Track Note Once finished the path of the track cannot be modified You can change the line s color and you can append to an existing track line using the Distance Tool see page 90 but the shape of the track cannot be changed Looping a Track To join the end of your track to the beginning right click on the track and choose Toggle Loop If you wish you can fill the interior with a pattern and color of your choice right click on the track and choose Edit then make your selections under Loop Interior Finding Length and Area Right click on a track line and choose Information The Track Information window gives the track s exact length and the option to view an elevation profile If the track forms an enclosure Track Information will also give the exact area of the enclosure 88 Editing Tracks Edit Tracks Star leland loop To Harvey s Trk2 Trh2e Wagon Hill General Full Hame Fine Bend Brook GPS Mame FINEBB Loop Line Style Color Width Highlight Fill Color o Advanced Comments gt Route Append Delete e Click Layers gt Tracks to view a list of all your tracks Highlight a track to view and edit its characterist
22. coverage area is found at a longitude of 77 degrees B the map is in the second grid position north of 41 degrees 3 the map is in the third grid position west of 77 degrees TF a topographic map with contours measured in feet 024 the map scale is 1 24 000 Map Scale The relationship between the distance on a map and distances on the ground is known as the map scale Most Maptech CDs provide maps at 1 24 000 1 25 000 and 1 100 000 Map Type Terrain Navigator Pro uses topographic maps bathymetric topographic maps and orthophotomaps aerial photos The unit of elevation measurement feet or meters is also given here Datum Because the Earth is not an exact sphere scientists are calculating improved models for where the center of the Earth lies The Datum is this calculation When latitude longitude markings are drawn on a map they are made in reference to a specific datum It is important to know the datum of a map when making exact measurements The location of a set of latitude longitude coordinates under a particular datum may change substantially if the same coordinates are used with a different datum Most USGS maps use a Horizontal Datum known as NAD27 North American Datum of 1927 Other datums you may find are NAD83 North American Datum of 1983 and WGS84 World Geodetic System of 1984 Vertical Datum has the same principles as Horizontal Datum described above except that it applies to height calculations Contour
23. find that the 1 24 25 000 option is grayed o out Since 1 100 000 scale maps cover a lot of ground you might be viewing coverage for an area outside the state so the corresponding 1 24 000 scale maps are not included on your CD 10 Finding Places of Interest Terrain Navigator Pro s Find menu provides several search Find options to help you find specific places quickly and easily Street Address These search options are powered by the GNIS Geographic City Town Names Information System a database of place names Zip Code compiled by the USGS Each place listed in this database is Coordinates referenced to its location on the map Search all Placenames Ctrl F The Find menu lets you search specific categories including Browse Category city or town name map name zip code etc You can also HO choose from more than fifty Geographic Categories terrain Bookmark Ctri B features Once you have selected a category Terrain GEOPIN Navigator Pro provides a list of possible matches for you to GPS Location ahr choose from Select the best match from the results list and Marker press Open to see that location on the map Range Ring Range Bearing Line Search all Place Names Eo E x Route Tere keyword Greeley Find Map by Name Map type fi 24 000 25 000 Search a I Map by USGS Reference Code e d E Place Eisenhower Mount ildi Horace Greeley Birthplace Greeley Ponds Greeley Camp
24. format used by some websites for coordinate sharing Your markers will be retained in Terrain Navigator Pro Exporting markers does not delete them from Terrain Navigator Pro It simply creates another version of your marker data in a text file format You can share your MXF data with other Maptech software users To import markers into Terrain Navigator Pro just click File gt Import gt Markers and browse to the location of the MXF file The imported markers will be added to your marker list and will appear on the maps Markers exported from Terrain Navigator Pro may be imported into various Maptech programs including Terrain Navigator Pro recreational version Terrain Navigator Pro for GIS CAD Offshore Navigator marine navigation software Chart Navigator marine software for trip planning and Pocket Navigator for use on Windows PocketPC devices Terrain Navigator Pro can import MXF files from any previous version of any of the Terrain Navigator Pro family of programs Importing Markers To import an MXF marker file click File gt Import gt Markers In the window that appears browse to the location of the MXF file you wish to import You may only import one MXF file at a time Once the file is selected press Open A message will appear on the screen telling you how many markers were imported 108 A single MXF file may contain data for more than one marker Marker import is backwards compatible which mea
25. in utilities and Technical Documents In addition you will find an online technical support discussion forum where Maptech software users and technical support staff can share information suggestions and comments The Basics Opening Maps Double click any square in the map grid to open that map Open Map North Coast Eureka CA AH P amp H RIDGE 41123 D08 T F O24 sv Slok r PHH BURRE 4 HUMBOLDT TARARE Es k Coverage co LO Library Map Type 1 24 000 25 000 Seamless Wap Name EUREKA HIA Al TEH gt Ret Code 40124 G2 TF 024 ld a 4 M Show at Startup Open amp nother Cancel Help GoTo gt gt Find When you first start Terrain Navigator Pro the Map Selector appears You can also open the Map Selector by clicking File gt Open The Map Selector is an overview of the state or region with a grid showing the area covered by each map As you move the cursor over the grid each map s title and USGS reference code are shown at the top of the window Double click any square to open that map Moving Around the Map Selector You can move around the Map Selector using the scroll bars or by holding down the Ctrl key while dragging with the mouse Choosing a Different Map Scale Maptech Professional USGS Topographic Series CDs provide two map scales to choose from In most cases the two scales are 1 24 000 25 000 The standard 7 2 minute quads most often used
26. name of the Project and press Delete Since Projects allow you to shelve certain layers while working with others thereby keeping your maps free from extra clutter you may find that using Projects lessens your need to delete layers in the first place Deleting ALL Layers of a Given Type Terrain Navigator Pro also includes a feature whereby you may delete ALL layers of a particular type within the current Project see page 34 This command is irreversible so as a precaution against accidental deletion the process requires multiple steps 1 First you must enable the Delete All function click File gt Preferences gt General and check Allow Delete AIl 2 Next use the Layers menu to select a layer type 3 HOLD DOWN THE SHIFT KEY while pressing the Delete button found in the given layer s Edit window A message will appear asking you for final confirmation before your layers are permanently deleted IMPORTANT ONCE DELETED LAYERS CANNOT BE RESTORED Be absolutely sure you wish to delete ALL layers of the given type before using this command 35 Distance Area Tools Distance Tools Use the Distance tools to quickly measure distance or area Two Distance tools are provided For straight line measurements including segment length and bearing and total length Allows curved line measurements Select either Distance tool then click on a starting position on the map Click again and a distance line will join the
27. note the effective scale of the printed map 1 10 000 for example Notes 1 The map image fills the printed page to its maximum extents If a larger paper size is available larger areas can be printed Large format plotters can be used to print full size USGS quads at the same scale as the originals 2 Some laser printers may have difficulty printing a full map at their highest quality setting This is because printing a full page graphic is very taxing on a printer s memory If this should occur print at a lesser quality setting or use Quick Print If necessary contact your printer s manufacturer to find out how much memory your particular printer model requires in order to print a full page graphic 4 In order to be consistent between 1 24 000 and 1 25 000 series maps and to ensure that adjacent maps align properly all 1 25 000 series maps are printed at 1 24 000 scale when Scale is set to 100 Quick Print E Quick Print is a screen print The Quick Print command prints the exact map area displayed on your computer screen no more no less Itis a one step process There are three ways to perform a Quick Print 1 Press the Quick Print button on the toolbar 2 Click File gt Quick Print or 3 Press lt CTRL gt Q The amount of map area printed during a Quick Print is exactly the area shown on the screen Since most printers are capable of printing areas larger than the screen is able to display a Quick Print tends not
28. of accuracy you require Terrain Navigator Pro will create as many waypoints as necessary at whatever locations work best to keep the route in line with the path within the bounds you specified Obviously the smaller the error you allow the more waypoints Terrain Navigator Pro will create for your route 84 Creating Waypoints by Distance At least X feet apart Wherever possible the legs of the new route will be least this long For straight stretches waypoints may be placed farther apart Exactly X feet apart Terrain Navigator Pro will place the waypoints at this regular interval along the track distance line It is important to remember that in calculating the equal spacing intervals Terrain Navigator Pro is working from the track distance line Due to curves in the track distance line waypoints may be closer together than the distance you specified For example Suppose you request that waypoints be placed exactly 200 feet apart Terrain Navigator Pro follows your path and places a waypoint every 200 feet Between two waypoints there is a hairpin turn When the path is removed from view and only the route is shown you ll see that the two waypoints are closer together than the distance you specified In such a case you may wish to create a different route using a different method like Direction Change see above Creating Waypoints by Number Spaced equally As when creating waypoints by distance see above you sh
29. or End points as you wish The range and bearing figures are shown at the end of the line These figures update themselves as either point is moved Specifying Range Bearing Figures Instead of Dragging Points If you prefer you may type specific range and bearing amounts right click on the range bearing line and choose Edit 56 Editing Range Bearing Lines Range Bearing Lines Eai da ait E x Created Mon Feb 24 15 57 07 01 Mame l Day 17 From Whiteface to Passaconaway Great Hill Tower to Camp Willey Summit start Point Start at coordinates below C Start at GPS Position Latitude EE 50 9 491 IN Longitude 70 56 3 131 w End Paint Set Time Speed and Bearing Time 3 000000 Hours Bearing fi 40 00 Degrees Speed 2 00 MPH Display Options Line Color sd Show Name on Map coo ae M Show Distance amp Bearing Line Width Lock Motes p progress under ideal conditions New Delete seo To see a list of all your range bearing lines and to edit specific ones click Layers gt Range Bearing Lines You can also right click on a range bearing line and choose Edit Name Replace the default name with a name of your own choosing Display Options Specify a line color line style dashed dotted etc and line width Check Show Name on Map and the name of the range bearing line will be included next to the Start point Check Show Distance amp Bear
30. points Display Options Ring Color Sixteen colors are available Line Style In addition to solid lines Range Ring Information For information on a set of range rings and the map containing them right click on the rings and choose Information Range Ring Information LO Mame New Hampshire Map Name WARNER USGS Ref Code 43071 C7 TF 024 Map Scale 1 24 000 Map Type Topographic Feet Map Projection Transverse Mercator Vertical Datum National Geodetic Vertical Datum 1929 Horizontal Datum Morth merncan Datum 1927 Contour Interval 20 feet Year Created 1987 Revised Inspected None Range Ring Hame phone zone Ring Interval 5 00 Miles Eo of Rings 1 Latitude 04315 33 04 H Longitude 071451 26 40 42 Centered Oni Static Locked Ho Notes Company policy dictates that the employee carving the Emergency Contact cell phone must reman within a Eemile radius of the office 55 Range Bearing Lines 2843 feet O Trey ll 2530 feet 95 True A Bi Use the range bearing tool to find straight line distance range and bearing between any two points Select the range bearing tool from the toolbar or click Tools gt Range Bearing Line and click on the map to set your Start point A line in the shape of an arrow will appear on the map The range bearing line starts at the point where you clicked Use Cursor to Move Start and or End Point Use the cursor to drag the Start
31. shows the summit off to one side instead of centered set an offset angle wide enough to move the summit to the edge of the landscape being shown For example if you re following a route that encircles a summit counter clockwise an offset angle of 30 degrees would shift the focus to the right of the summit moving the summit itself off to the left of the display The effect of an offset angle will vary depending on the distance between the route line and the point you have specified You may need to experiment with different offset angles to achieve the view that you want Clip Details Duration Set by the number of frames you wish the finished clip to contain the speed at which you want the camera to travel the route or the amount of time you want for the clip playback Frames per second The more frames per second the smoother the animation but keep your computer s graphics capabilities in mind when setting this figure The default setting is 15 frames per second Frame size Determines how much map area to show in the animation Again set this according to your computer s graphics display capabilities The default setting is Medium 28 Options Bank camera on turns Lean the camera to the right for right turns to the left for left turns Smooth view when turning tilting Instead of switching the view immediately from one heading to the next include views from intermediate headings for a smoother visual effect Show route on map I
32. so that the last waypoint becomes first right click on any waypoint choose Edit Route Waypoints and press the Reverse button This is handy for returning to the start of a route on the return trip Editing Routes Edit Routes General lez Long Fond Mtn GPS Name LnaPnd AutoTest l Loop Font Color o Font Loop Interior Pattern i None Colden Loop Desolation Aidge Line Width Highlight Comments Hew Edit Delete oo Click Layers gt Routes or right click on a route waypoint and choose Edit to view a list of all your routes and edit individual routes characteristics Highlight the route you want to edit then make your changes in the right half of the Edit Routes window 78 Route Characteristics Full Name The full name of the route as it appears in Terrain Navigator Pro s route list in the left side of this window GPS Name The GPS Name is the name that will appear on your GPS screen when you send a route to your GPS To accommodate the widest range of GPS units many of which use a limited number of characters for route names the GPS Name is limited to six characters Font Select a font to use for the waypoint names and any accompanying AutoText on the map image Symbol Symbol Color Several symbols are available for marking waypoint locations on the map Note The symbol you pick here will be used for all waypoints in this route To spec
33. the file is selected press Open A message will appear on the screen telling you how many routes were imported along with the total number of waypoints You cannot import route data if it already exists in Terrain Navigator Pro If you try to import an RXF file that contains route data that already exists in Terrain Navigator Pro you will receive an error message explaining that that route could not be imported This may happen if you created the RXF file as backup but never deleted the original route from Terrain Navigator Pro A single RXF file may contain data for more than one route Route import is backwards compatible which means that you may import RXF files from any previous version of any program in the Terrain Navigator Pro family of programs Route Text File Format RXF The text file format for route import export ends in the file extension RXF Terrain Navigator Pro handles internal data conversions in WGS84 datum and then presents the coordinate information in whatever datum you have selected in the Preferences window When you export route data from Terrain Navigator Pro the coordinate data in the resulting RXF file is given in WGS84 datum Please bear this in mind when working with data from RXF files Below is an example of the RXF file format showing the waypoints of a route named Brook Trail 43 7721633 071 2655753 Lodge Lodge Lock door Brook Trail 800000 ff0000 11 43 7711296 071 2749
34. to do is type your message and the recipient needs only to click on the URL link to go straight to the MapServer and see the same map image that you re viewing on your screen An advantage of using the Send Link option is that the MapServer allows you to scroll in different directions and switch map scales and types so the recipient of your message can not only see the image you sent but can also view surrounding areas The Send Link feature lets you share map images without having to send actual e mail attachments If you prefer to send a JPG file attachment instead of a MapServer link click File gt Send Map Keyboard Shortcuts Use your keyboard s Control key to temporarily switch to the Drag tool while you re using a different cursor tool Press the Shift key to switch to the Zoom Out tool Right click on the map for zooming options Pressing Backspace erases the last drawn Distance Track or Route segment Hold Backspace down to keep erasing Use your keyboard s Delete key to delete the current example of the active layer tool 23 Ctrl B Ctrl C Ctrl E Ctrl F Ctrl G Ctrl K Ctrl L Ctrl O Ctrl P Ctrl Q Ctrl S Ctrl T Ctrl Y Ctri A 24 Find bookmark Copy map to clipboard Edit markers Find placename Center map on GPS position Start GPS Tracking Tile wndows horizontally Display Map Selector Open Map Print Quick Print Change CD region Tile wndows vertically Toggle layers on off
35. to fill a printed page However increasing your computer s Desktop area e g running at a higher display resolution will let you view and therefore Quick Print a greater map area For example if your computer s display resolution is set to 640x480 you might want to try setting it to 1024x768 or greater Increasing your Display Resolution Depending on your version of Windows you can find this setting in one of two ways 1 Click My Computer gt Control Panel gt Display Or Click Start gt Settings gt Control Panel gt Display or Right click directly on your desktop display and choose Properties 2 Select the Settings tab 3 Drag the lever to increase the Desktop Area or Screen Area 4 Press Apply Note The maximum desktop area depends on the capabilities of your monitor and your video card 96 Exporting Maps NGS Benchmark Data Exporting Maps E se WOLFEBORO User Defined fe fe fos n Pela fase Terrain Navigator Pro lets you export map images for use in other programs such as GIS Geographic Information System applications desktop publishing photo imaging and site presentation First open the map that you want to export Then click File gt Export gt Active Map to select the area you need and to specify export options Note Layers are not included on the exported map image To capture a map image with layers present click File gt Export gt Copy to Clipboard Scale and dpi
36. using If your 3 D Accelerator Information window says Hardware driver found but not functioning this means that although the driver is classified as a hardware driver it does not have the capabilities necessary to provide hardware acceleration in Terrain Navigator Pro s 3 D View An updated driver may correct this problem 3 D View is greatly improved by Hardware Acceleration In order to try using Hardware Acceleration you MUST update your video card s drivers Updating your Video Card Drivers Video card manufacturers routinely update their drivers You can download the latest drivers from your video card manufacturer s website in fact it is a good idea to check every so often to make sure you have the latest drivers available To find out the make and model of your video card click Start gt Settings gt Control Panel Display then select the Settings tab press the Advanced button then select the Adapter tab This window tells you the manufacturer of your video card the model name and the version of the driver software version You may want to make a note of this information for reference Next visit the manufacturer s website Typically you can select your video card model from a listing usually found in the site s Support or Downloads section Check to see that the driver version listed for your model matches the driver version that you re using If it doesn t you need to download and install the latest driv
37. will shift half a screen each time you click the compass A few other ways to move around the map Scroll bars on the map display Page Up and Page Down keys move map up and down Hold the Shift key and press Page Up for left Page Down for right Zooming In and Out Zoom Levels Terrain Navigator Pro provides four zoom levels for viewing maps 4 Zooms the map out to 25 of actual scale 2 Zooms the map out to 50 of actual scale 1 Original scale 1 Magnifies the map by 200 N a a When you first open a map it is shown at 1 1 zoom ratio To see more of an area zoom out Fora closer view zoom in Use the toolbar to select a specific zoom level or as Select the Zoom In or Zoom Out tool then click on the map The zoomed map will be centered on the point that you click You can also right click directly on the map and choose Zoom In or Zoom Out Note At 1 1 zoom every pixel that makes up the map image is shown To achieve other zoom levels pixels are either added or taken away Changing Map Scales Your CD provides maps at different scales For most regions topographic Aaa 11 maps are provided at 1 24 000 25 000 and 1 100 000 scale You also have pa access to 1 12 000 scale aerial photos Use the toolbar s scale control to 1 12 000 switch between scales oo 1 24 000 If an item is grayed out that scale isn t available For example when viewing E a 1 100 000 scale map you might
38. x This window appears when you take a file that has position data attached to it and drag and drop the file onto the map image Such files include for example photos taken by a high end digital camera C Place at coordinates recorded with photo with a GPS hookup For these photos position data is typically included in a portion of the file known as the EXIF header Positior C Place at cursor location Apply to all inthis group Place at cursor location Terrain Navigator Pro will place the Cancel Help GeoPin s at the point where you dropped the file s on the map image instead of placing the GeoPin at the location recorded in the file Place at coordinates recorded with photo The GeoPin s will be placed at the coordinates indicated in the file s When you select this option all you have to do is drag the file anywhere onto the map screen and Terrain Navigator Pro will automatically position it at the location indicated within the file Apply to all in this group If you re dragging multiple files at once you may check this box to place all the GeoPins according to the method selected above 90 Range Rings Use Range Rings to see all the terrain within a given distance of a central point Click Tools gt Range Ring or click on the range ring toolbar button then click on the location from which you want to measure Grab Rings to Stretch Shrink Grab Center Point to Move You can use the Ra
39. 2 Nice place for lunch if it s not too windy General Characteristics Full Name The full name of the waypoint as it appears on the map GPS Name The GPS Name is the name that will appear on your GPS screen when you send this route to your GPS To accommodate the widest range of GPS units many of which use a limited number of characters for route names the GPS Name is limited to six characters Symbol Font Colors Several symbols are available for marking this location on the map 16 colors are available for symbols In addition a Background Color option is provided so that you can set an opaque background behind the waypoint name text on the map This may make the waypoint names easier to read Comments A space provided for you to record notes about this location Coordinates The coordinates of this waypoint You may type new coordinates if you like The coordinate format setting is found in General Preferences AutoText AutoText is location information that you may include along with the waypoint name onthe map The AutoText will automatically update itself if the waypoint is moved You may choose to include Coordinates Street Address Elevation or Grade While the Route Edit window lets you select AutoText to appear with ALL waypoints in a route here in the Waypoint Edit window you can assign different AutoT ext values to individual waypoints Individual waypoint AutoText works the same way as Label AutoText see page
40. 506 Pick up trail Pckptr Brook Trail 800000 ff0000 O 43 7685800 071 2792148 Water stop Wtrstp Brook Trail 800000 ffOOff 11 43 7669951 071 2849459 Lunch Lunch Brook Trail 800000 ff0000 11 43 7655480 071 2871729 Good view Gdvw Brook Trail 800000 ff0000 11 43 7638597 071 2940883 Switchback Swtchb Brook Trail ffff ffO000 11 106 43 7577270 071 2985914 Cabin Cabin Brook Trail 800000 ff0000 11 The route Brook Trail contains seven waypoints The first waypoint is named Lodge and is located at latitude 43 7721633 N longitude 071 2655753 W The coordinates are given in decimal degrees For latitude North is a positive value and South is a negative for longitude East is positive and West is negative You can convert from degrees minutes seconds with the following formula Conversion Formula Degrees Minutes divided by 60 Seconds divided by 3600 Decimal Degrees Express this as a formula and you get D M 60 S 3600 decimal degrees Example For example a latitude of 43 degrees 30 minutes 50 seconds would translate to 43 30 60 50 3600 43 5138888 decimal degrees Here s the math 30 60 0 5 90 3600 0 0138889 00 0138889 00 5000000 43 0000000 43 5138888 The next two values in the line are the full name and the GPS Name of this waypoint Following is a space for the waypoint comment if any in this cas
41. 60 pixels to represent 2 000 linear feet on the ground Each pixel therefore represents an area 12 5 feet wide 2 000 160 12 5 Because pixels are square each one represents 156 25 square feet 12 5 X 12 5 Assuming the original USGS topo were 100 accurate this means that the coordinates provided by Terrain Navigator Pro would always be within 15 feet of the actual position However it is next to impossible to make a 1 24 000 scale map that is accurate within inches on the ground To ensure maximum practicable accuracy the USGS has adopted National Map Accuracy Standards USGS and National Map Accuracy Standard According to these standards cartographers strive to ensure that any point on a 1 24 000 scale paper map is accurate within 1 50 of an inch On the ground this translates into a distance of 40 feet 119 1 inch 2 000 feet 2 000 50 40 feet See for Yourself The process of assigning coordinates to specific pixels in a map image is called georeferencing You can observe the accuracy of your digital map images by viewing a map in Single Map View Place the cursor over any of the map s four corners and compare the displayed coordinates with those printed on the map You may find it easiest to use the Centering tool and set your General Preferences to Degrees Minutes Seconds You should also ensure that your Datum setting also found under General Preferences is set to Local so that Terrain Navigator Pro will display co
42. 61 If you re only using the GPS for data transfer and NOT for navigation you can turn off your GPS unit s satellite search function This can conserve battery power Remember to turn the satellite search function back on when you need position data B No Connection Indicates one of the following a the GPS is turned off b the GPS has lost power c the GPS cable has become disconnected or d the GPS is not properly configured If this red X appears during navigation you should immediately check all of the above If this red button appears at any other time for example when you turn your GPS off after completing a data transfer this is because Terrain Navigator Pro doesn t know that you are done using your GPS unit Click GPS gt Connect again to uncheck the Connect option This tells Terrain Navigator Pro that you no longer require GPS communication and the red X will disappear Note Being connected to a GPS that has failed or been physically disconnected will detract from Terrain Navigator Pro s performance GPS Port Settings Port Settings affect the speed of data transfer during serial communication between your GPS unit and your computer With most recreational GPS units these settings are not BAUD Rate seno ge flexible but some GPS units do allow for adjustments Data Bits le If these options appear grayed out it means that Terrain Navigator Pro has automatically detected the port settings used Pari
43. C4 T7M 0 24 4407 25 TM 0 24 44071 C6 TM 0 24 401 22 TF 0 24 44071 Co TF 0 24 4401 2009 TF 0 24 44071 0 2 TF 0 24 al Select All Clear All 3 01 ME Back Finish Cancel Help 21 60 GE Available Size of Files The final window shows an overview of the available area with a Superimposed map grid Select the maps you want to send You can click directly on squares in the map grid or select maps from the Map Name or Reference Code lists As each map is selected it is highlighted in the lists and the grid At the bottom of the window you can see how much space the selected maps will require and how much space is available Click again on any map to deselect it Select All Clear All buttons are provided to make the selection process faster Selecting Different Scales Aerial Photos Use the Map Type dropdown menu at the top of the window to specify the map scale that you want For aerial photos set Map Type to 1 12 000 When you have made your selections press Finish The maps along with any additional data you selected will be saved in the location that you specified Notes For information on ArcPad visit www esri com For details on using Terrain Navigator Pro maps in ArcPad see the Downloads page at www maptech com for a downloadable guide in Adobe PDF format 104 Importing Exporting Data in Text File Format Routes Exporting Routes Export Routes Slang Pond Rteb Raquet
44. Edit or click Layers gt GeoPins and highlight a GeoPin in the list to edit its characteristics Elm Uak Intersection Harpur report Iron Lake weather site Project timeline South Meadow webcam Species Count Willey Photos Mame Species Count Target CAPark Studiesarmundsen_ preserve bird count xls Browse fas ho f20 34 m Longitude 71 Mer 30 20 w Coordinates Latitude Name Assign a name for this GeoPin This name may be included on the map Target The file to which this GeoPin is linked Double clicking on a GeoPin on the map 48 Display Wo Show Name Lock Notes 08 08 02 114M 5FM 64 deg humid and hazy will open the linked file Press Browse to specify a different file Coordinates The location marked by this GeoPin Show Name Check here to include the GeoPin Name on the map image beneath the symbol Lock Locks the GeoPin symbol in place on the map so that it cannot be accidentally moved Unless locked a GeoPin may be dragged to a new location Notes Space is provided for you to record comments about this map location and attached file Searching for GeoPins To find a particular GeoPin click Find gt GeoPins and select it from the list GeoPin Placement Based on Time Date Stamp GeoPin Placement gq x Terrain Navigator Pro lets you drag and drop files onto the map image where they will appear as GeoPins Position
45. GPS unit s memory This may take several minutes ICEBERG LAKE i MTMCICISILALIKE depending on how many track logs you have and how many points each log contains From this list select the tracks that you want to bring into Terrain Navigator Pro You can use the Shift and Control keys to make multiple selections When you have made your selections press OK Cancel Help Most GPS units use numbers for track names Terrain Navigator Pro gives you this chance to assign a more descriptive name to the track that you re receiving This window will appear once for each track that you re receiving Naming Options Choose New if you want this to be a Track Name ae x OS Es completely new stand alone track Mame E oott Spur e New Append Dwverrite Cancel Help To add on to an existing track choose Append When you choose Append the Name field becomes a drop down list with the names of all existing tracks Select the track you wish to build onto The new track points will be attached to the end of this track To replace an existing track choose Overwrite This will delete the old track and use the same track name for this new track When you have assigned names to all the tracks you are receiving Terrain Navigator Pro will retrieve the track points from your GPS The tracks will appear on the maps and will be added to the list of tracks in the Edit Tracks window When assigning names to new tracks
46. LL examples of a given layer type at a single time For example when this option is checked you will be able to delete all your markers at once in a single command IMPORTANT NOTE Once your layers are deleted they cannot be retrieved To guard against accidental deletions this extra step has been added here in Preferences as a safeguard Once Delete All is checked select a layer type from the Layers menu and in the window that appears press the Delete button while holding down the Shift key on your keyboard A final confirmation message will appear asking if you are certain you wish to delete all layers of that type before the data is permanently deleted Distance Tool Set a line width for measurements made with the Distance tools Export Options These settings apply to maps exported as TIF files A tiled TIF file is broken into separate chunks while a compressed TIF is one single image file Terrain Navigator Pro uses a Pack Bits file compression method Consult your application s documentation to find out what TIF settings it is compatible with 19 Tips and Tricks Using GeoTips GeoTips are small temporary labels that automatically pop E A E E up on the screen when you hold your cursor over a particular item of interest You can customize your GeoTips to show specific kinds of information depending on where you place your cursor For example when you rest the cursor on a marker a GeoTip can show the coordinates o
47. Locked as described above 21 Working in Two Window Mode Arranging the Map Windows Use the Window menu to arrange map windows choose Tile Horizontally to share the screen side by side Tile Vertically to arrange maps one above the other and Cascade to arrange the windows in a cascade pattern so that both windows are near maximized but both title bars are still visible Window gt Auto Tile will automatically split the screen evenly between the two maps placing them to best represent their actual geographic locations relative to each other For example if map A shows an area several miles north of map B the maps will be tiled horizontally with map A above map B If the two maps differ more in longitude than latitude then they will be tiled vertically with the western map on the left side of the screen The Active Map Window When you have two map windows open one is the active window and the other is inactive The active map window is the one you were last working with whose title bar is highlighted Commands such as Print Zoom In Out Seamless View 3 D View etc are automatically applied to the active map Obviously if you have only one map window open that window is the active window Replace Active Replace Inactive Any command that requires opening a map gives you two choices Replace Active and Replace Inactive These two choices appear as buttons in the Map Selector and in all of the Find windows You can decide wh
48. NS rreran nn a a a a a 52 Stacking Multiple Sets of Rings on the Same Center Point o ooccccccnccccccccnccccnccncncnncnnnnoncnncncnncncnanonos 53 Range Ring e eS o et ee ee 94 Range RNO At Mal e do o 599 RANGE BEARING LINES iaa 56 Editing RANGE DB CarnG WINGS ss o ed ter de dedo cdg 57 Range Bearing Line InformatioON cooccccocncconnoconnnconnononcnnnnonnnnnnannnnnnnononnonnnnnnnnonnnnnnannnnnnnnnnnenanenenans 58 Range Bearing Line Preferences cooocccccnccocnccocnoconnncancononconnncnnnnonnnnnnannnnnnnnnnnnnnnnnnnnnnnannnnnnnnnnnnnananenans 59 OPS anA te ws wa ce wee era stem ee ee ice cn este eevee ce seen eee 60 COVA CO CUING saene te esece A 60 ESlabllSMing COMA UMICAUO M seres aden loli iia ico 61 CSP OM SS TUNING Si cess aa bt ie ee ned 62 alo A eee mR nna Ree a ee 62 Using HyperTerminal to Check your Equipment Connection occcocnccccncoccnnoccncncnccncncnncnonncnnnnnonononononos 64 Realtime Gro ITAGKING raoran asec AIR 65 OPS Tracking PFCTCKONCCS ys oilers nl eect aad ieee dE 67 ORS PoOStOMAVe AGING cr tr o copia poi ci soda 68 2 0 AA A E 69 Receiving Data MOM GPS sara il ot oaenesiageasedes Sactowesseeneeteeeere 71 MARKERS at 73 EAU Mare Suu or a a 73 EQIE Mare Son laa eianieila decal a a 73 Marker AO TOM e E SAI 14 Marker PICICIONCOS a le rece Gu Nace a atin ls 15 A ieee a ia ate acta ai oeecietacetace a bie era eles cut iaceta te 76 ROUTE S a cates ic sects wl rete wey sec ves esse wee ly en oe in
49. Note When Rectify is selected instead of specifying a dpi you will be prompted to assign the export image s width and height in pixels Copy Checking this box will take the map image as it is presented within Terrain Navigator Pro and export this image exactly using the same parameters projection dpi scale etc This exported image may be saved as either a Windows BMP or TIF file and will not retain georeferencing Since Copy s export specifications are automatically set all other fields in this dialog will be grayed out when Copy is selected Universal Transverse Mercator State Plane Specify State Plane in this Projection window for access to available choices which will appear in the Zone window Zone Select from this list of available projection parameters These will vary depending on what projection has been chosen Datum Select a datum to use in creating this exported image For Transverse Mercator Lambert Conformal Conic and State Plane you may specify Feet or Meters NAD27 North American Datum of 1927 NAD83 North American Datum of 1983 WGS84 World Geodetic System of 1984 Northwest Corner The coordinates of the northwest corner of the map area to be exported Enter specific coordinates if you like This option will appear grayed out unless User Defined Area has been chosen Southeast Corner The coordinates of the southeast corner of the map area to be exported Enter specific coordinates if you like
50. Overwrite an old track and replace it with a new track of the same name If you choose Append the Name blank will become a drop down list of all your existing tracks Select the name of the track to which you want to attach this distance line Your distance line will be added to the end of the track matching it in color Note The new portion will be appended to the end of the track line Track Name au al Ex Mame E oott Spur e New Append Ovenarite Cancel Help The Name drop down list also appears when you Overwrite a track Select the name of the track you wish to replace and it will be overwritten with a new track of the same name 3 Elevation Profile Line of Sight Profile Profile in SA 6 a 10 12 14 a fel ides EN al gt Total distance 21 miles 5090 feet Climbing 1542 meters Latitude 044 70 43 05 N Descending 1541 meters Longitude O74 14 02 Yw Ground distance miles 1459 feet Elevation change 0 meters Elevation 26 meters Minh ax dr me1247 Grade Us Close Export Print Help Terrain Navigator Pro provides a Profile option for use with the distance tools tracks or routes The Profile is a graphic representation of the changes in elevation along a defined path The profile window provides total distance ground distance and overall elevation change etc You can also find approximate grade and elevation measurements for specific locations along the path hold the cursor
51. Place marker at GPS location during Tracking 3 D View On a topographic map elevation changes are represented by contour lines Terrain Navigator Pro gives you an additional way to get a sense of the shape of the terrain 3 D View Both topographic maps and aerial photos may be viewed in 3 D Press the 3 D button and the area you re viewing will be displayed in 3 D so that hills and m Valleys are pictured as actual contours In 3 D view you can see the land s rises and dips in relation to each other which makes it easier to judge relative height Special controls along the left side of the screen let you view the terrain from any angle including from above Hia Zooming In Out These arrows control how close you are to the landscape The notation above the arrows tells you the direction in which you are looking You can choose whether the arrows should move your viewpoint or move the landscape Terrain Navigator Pro s default setting is for the arrows to move your viewpoint which means that if you press the forward facing arrow you ll be moved in closer to the landscape Click File gt Preferences gt 3 D to change the way these arrows work Raising Lowering your Viewpoint Drag this sliding lever to adjust the height from which you are viewing the map The three vehicles give you an idea of the height of your viewpoint Rotation Steering These arrows let you adjust the angle at which you are viewing the landscape You h
52. Preferences Category Range Bearng Lines 7 Range SET BY DISTANCE Distance OOD000 Miles hd 7 SET EY TIME Time fi 000000 Hours uid If traveling at this speed E 000000 KMPH i Bearing 45 000000 Degrees Display Options Line Color Line Style Line Id Show Name M Show Range and Bearing various dashed line options are provided Line Width Adjust line thickness to best emphasize your range rings on the map image Number of Rings Specify how many rings to create around each center point Show Name The name of your range ring can be displayed at the center point Show Ring Interval Check here to include text at each ring noting the distance from center point This text note will appear at the northernmost portion of each ring 54 Click File gt Preferences gt Range Rings to adjust the settings that Terrain Navigator Pro will use for all new range rings that you create These are your preferred settings you can of course edit your range rings to change specific rings settings whenever you like Ring Spacing Set by Distance Spaces the rings at regular distance intervals Specify how far apart the rings should be Set by Time This is useful for predicting progress at different speeds Type a speed and specify a time increment For example you might choose show distance traveled every 15 minutes at 45 mph to anticipate your progress and plan stopping
53. Terrain Navigator Pro User Guide Table of Contents INTRODUC TION cuotas iii 5 Wat INS Vcc o uraaaic 5 Contacting Maplechs a E E E 6 TREDAS Oia ios 7 openmng IMS ieee gu lados 7 MOVING ATOUNG NE MAD wi iiss denisieraiina need bows A aid 8 ZOOMING Mand DU a e eer ee ace 10 Finding Places OF Mieres acted theca ue eee eee 11 BO KMAKNOLOCAUONS ee a 12 Seamless Single Map Vi Wisin A da 12 A A a E A 13 Copying Maps to Yo r Hard DIVE reien anaa a a aaa a aa a aa a a aai 15 Updating Maps Photos via the Internet coooccoccncoccnccccnccocnnconnonononnonconnnnonnnonannnnannnnnnnnnnncnananenano 17 General Preterences ii is do 17 TIPS AND TRICK Sassari 20 USA CSCO VOSS sist 2st atieasd ic tata ks gates dd 20 WOKING WIN EWO NMapWINO WS cis 21 Creating a CUSTOM SAA ad ad A a 22 E Mala Maps ds 23 Maplech Map See e e e 23 Keyboard SMOMCUIS ai A ii 23 OID VEE VV onaga E T 25 Recording a 3 D Rotation Video ClO cic scowint o 26 FRECOrding a 3 1 Route Video Cl OS 2 D Ie FOL CI OIC C Seo casas seme os chel dae A Net outa ahead val hand E 29 HardWare ACCE raUo aranne aan and 30 Updating your Video Card DriVerS occccocncccnncoccncocnnnonnonnnnnnncnonnnnnnnnnnnnnnnnrnnnnrnnnnnnnnnnnnnnnnrnrnonnnnnnnnenenass 31 WORKING WITH LAYERS coccocccocconconconononccnnconnnnnonnnonnnnncnnnnnnnnnrnnnnnncnnrnanennnnanos 33 ADOUL CAVO Seien la era Didac cee ens acid 33 E tua earns eet na simatic ema E natalia tab gemstones 33 Organizin
54. The scale and dpi that you specify here will affect the appearance of this exported image Scale refers to how big the map image should be while dpi sets how many pixels should occupy one inch at that scale Optimal dpi is 160 Terrain Navigator Pro s map images are presented at 160 dpi If a dpi higher than 160 is specified Terrain Navigator Pro will replicate pixels as necessary The actual resolution of the image will be unaffected When exporting images at the same scale as the map from which they were taken but with a dpi higher than 160 the image size in pixels will be increased but the image size in inches will not be affected Therefore it is most efficient to export at 160 dpi unless you have a specific reason to change this setting Tip When exporting images for rejoining in another application always export at a consistent scale 97 and dpi to ensure that the images will align properly with each other Projection There are six options for reprojecting exported map images Transverse Mercator Lambert Conformal Conic Rectify Due to the curvature of the Earth s surface the image width of one arc second as depicted on a map on paper or in pixels may vary This often results in maps whose corners are not 90 degree angles for example in the Northern Hemisphere a map is wider at the bottom than at the top Checking Rectify will reproduce the terrain so that each pixel of the map image has the same ground distance value
55. USGS DRGs are always in Universal Transverse Mercator projection the TIF DRG option is only available when projecting into UTM TIF TIFF 4 0 An early version of the TIFF this format is read by the vast majority of imaging programs This format will not retain georeferencing information BMP Windows Bitmap Format The standard image file for Windows environments This format will not retain georeferencing information JPG JPEG Format JGW For use with ESRI products such as ArcPAD HTM HTML Format Produces a georeferenced map saved as an HTML page You can insert this page directly into your own website HTML Map Export A When you export a map you may choose Export Options AN to save the exported image as an HTML page This produces a single HTM file ready for inclusion on websites The HTML page will show the georeferenced map image with scroll bars so site visitors can adjust the map view and look around Page Title Choccrua Summit Page Size Ith E When you specify HTM as your desired width feon Height s00 export format you will see an additional Export Options window above Units D bibie displayed beneath the map image Page Title The text you type here will be Page Size The dimensions in pixels of the window where the map image will be _ Cancel Help displayed If necessary scroll bars will be provided so users can bring other portions of the map into view U
56. a specific speed For example set all your lines to represent distance traveled in 20 minutes at 2 miles per hour Bearing Specify what heading Terrain Navigator Pro should use for your range bearing lines Display Options Select a line color line style dashed dotted etc and a line width Check Show Name and the name of the range bearing line will be included next to the Start point Check Show Distance amp Bearing to include these figures next to the End point These figures will update themselves as necessary if either point is moved 99 GPS Connecting Category GPS Setup 7 Configuration Manufacturer Gamin GPSMAP 168 Sounder GPSMAP 175 Datum GP5M P 295 lt lt Query unite gt NMEA Port StreetPilat GPS coma Port Settings About Driver Advanced Driver Motes four Garmin GPS provides several interface settings For successtul communication be certain to set the GPS unit s interface to GARMIN Before transfering tracks You may wish to annotate or remove pour stored tracks For successful communication your GPS must be properly configured To configure your GPS unit click GPS gt Setup Manufacturer Unit For the successful transfer of stored coordinate data between your GPS unit and your computer your GPS unit must be listed here First select your GPS s Manufacturer then specify your model under Unit If your model is not listed you
57. ack arrow Hold down the left mouse button and the map will scroll in the direction of the arrow Map Overview Beneath the Compass is the Map Overview a thumbnail image of the map that you re viewing The blue box represents your screen and indicates what part of the map is being displayed To view a different portion of the map move this blue box You can click and drag the blue box to a new position or you can click outside the box on another part of the Map Overview and the box will move to the place where you clicked The corresponding map area will appear Tip To enlarge the Map Overview press the black arrow button that points up to the Overview Press arrow button j l Blue outline indicates to emange overview gt _ screen area auras t to move State Overview The State Overview is a thumbnail image of the state The red dot gives a general idea of what portion of the state you re viewing For a more detailed overview click on the black arrow button that points to the State Overview This will take you to the Map Selector where the map you re viewing is highlighted Click on a different square in the map grid to open a different map Centering Tool Select the Centering Tool from the toolbar then click on the map The map image will be contare on the point that you clicked Compass Control Click any point of the compass to shift the map in that direction The map image
58. age Any margin widths that you set here in the Set Margins window will be applied in addition to this thin unprinted area Experiment to determine what settings will produce the desired printed results Caption Type a few comments here and check Summary to include them in your printout Layers Layer Information Check here to include layers markers routes tracks range rings etc on your printout Choose Small Medium or Large to control the printed size of the layers symbols Check Layer Information and a separate sheet will be printed after your map containing data about any layers included in the printout This will include any layers that are visible on the map image itself NOT the map overview here in the Print wndow Only markers waypoints and other symbol based layers will show up in the Print overview Despite being visible in the Overview they will only be included in your printout if you check the Layers checkbox Rulers Gridlines Checking Print Rulers to include coordinate rulers along the borders of the printed map The coordinate system may be specified General Preferences If you also check With Gridlines the intervals specified by your rulers will be joined by gridlines across the map printout Note The Print Rulers Gridlines option is unavailable for use with maps whose orientation is different from the standard North Up orientation Some such maps are found in coverage for Isle Royale and Shenandoah Nat
59. age including collar white border with map and legend information No Collar Check this to export the map s entire terrain coverage only without the map collar User Defined Checking here will let you precisely delineate the boundaries of the map area you wish to export Mask When a map is reprojected the image is shifted In order to maintain rectangular dimensions non map data for example portions of the white map collar may be included along the edges or corners of the exported image You can choose to mask or replace this non map data in two ways Color This will replace non map areas with a magenta color This color was selected because it is not used in any USGS topographic map and therefore may safely be deleted in imaging programs without damaging the map image The specifications for this color are Red 255 Green 0 Blue 255 In ArcView it is called Color 253 Adjacent Map Areas not occupied by the selected map image will be filled with map data from the adjacent quad s Areas not occupied by the selected map image will be filled with map data from the adjacent quad s If the map you re exporting happens to be on the border of a CD s coverage area you may want to copy adjacent maps from the bordering CD to your hard drive before exporting the desired map This will ensure that all adjacent maps are available for use in masking None If you do not require masking simply choose None As mentioned above the resulti
60. also opt to include AutoText in all waypoint names This setting will apply to all waypoints in any new routes you create You can choose to Append the AutoT ext add it to the end of each waypoint name or Prepend it add it to the beginning of each waypoint name AutoText AutoText is location data that you may include on the map with your waypoint names AutoText is so called because it will automatically update itself if the waypoint is moved You may choose Coordinates Elevation Grade or Street Address To add AutoText before the waypoint name choose Prepend To add the AutoText after waypoint name choose Append Waypoint AutoText is much like Marker AutoText see page 74 Reset Numbering Waypoints are automatically numbered to ensure that all waypoint names are unique This prevents confusion especially when transferring routes to a GPS If you like you can Reset the numbering to start again at 1 but keep in mind that this may result in duplicate waypoint names For example if you already have a Wpt4 and you reset waypoint numbering you could end up with two waypoints named Wpit4 This may be especially confusing if viewing waypoint names without noting their route affiliation 86 Create Locked You can lock individual routes in place on the map by right clicking any waypoint and choosing Lock Route Locking prevents accidental moving of waypoints Check the Create Locked checkbox here and all your routes will a
61. ap If only a portion of the line forms a loop area calculation is not possible In addition to line length the Information window gives you the exact coordinates and approximate elevation of your distance line s starting and ending points es me To continue adding line segments Press Continue or press a a A E the X button to close the Information window To erase the distance line Press Clear Distance can be measured over multiple maps You can switch between the Freehand Distance Tool and the Distance Tool during the same measurement This can be useful for calculating distances whose path varies between straight and curved sections Other buttons in the Distance Information window provide additional options Profile View a cross section profile of your distance line Route Create a route based on your distance line Several methods are provided Track Save your distance line as a track so it can be kept for future reference Converting the Distance Line into a Track The Distance Tool is designed purely for measurement rather than map annotation Therefore the Distance line is not saved on the map image However if you wish to save the path created by the Distance line you may convert it into a track which will be saved For more about tracks see page 88 Right click on the Distance line and choose Convert to Track This feature lets you create an entirely New track Append to an existing track or
62. aps as markers To locate them click Mames Comments Find gt Marker These new markers will be assigned a COLDEN whatever default symbol and color you specified in RAQUETTE AIR Marker Preferences Routes If you have routes stored in your GPS unit you can bring them into Terrain Navigator Pro to view and edit them on the maps Connect your GPS unit and click GPS gt Receive from GPS gt Receive Routes Terrain Navigator Pro will communicate with your GPS unit and create a list of all the routes stored in your GPS units memory This may take a few minutes depending on how many routes you have and how many waypoints Lancel Help each route contains From this list select the routes you want to bring into Terrain Navigator Pro You can use the Shift and Control keys to make multiple selections When you have made your selections press OK Finding a Route To bring a route into view on the screen click Find gt Route and select the route from the list Tracks As you know you can create tracks by hand on the maps in Terrain Navigator Pro In addition if you have track Names Comments logs stored in your GPS unit you can also bring them into Terrain Navigator Pro to view them on the maps Connect your GPS unit and click GPS gt Receive from GPS gt Receive Track Logs Receive Tracks m x Terrain Navigator Pro will communicate with your GPS unit and create a list of all the track logs stored in your EEE
63. articular COM port for use with another device like a handheld computer This means that even when that device isn t connected the port may still be blocking access by other devices in this case your GPS unit Use your Windows Control Panel to verify the port s status Check for Software Conflicts Certain software programs may also interfere with COM port operation If you use Microsoft ActiveSync for communicating with a handheld computer for example make sure ActiveSync is turned off when you connect your GPS to your computer Check your GPS Cable Make sure your GPS cable is snugly connected at both ends and that it isn t bent or twisted Twisting can break wires inside the cable Use HyperTerminal to Check your Port and Cable HyperTerminal a Windows accessory may be used to monitor the flow of data at your COM port Use HyperTerminal to determine whether your problem is equipment related See page 63 for step by step instructions Try Getting a Satellite Fix It may sound funny but sometimes a GPS unit will not respond properly until it establishes its geographic location even if this has nothing to do with the task at hand If you can place your GPS unit near a window in order to establish satellite communication then try connecting again Try Other GPS Software Try connecting your GPS to your computer using the software interface provided by the GPS manufacturer and packaged with your data cable Until your u
64. ary camera will always be stationed on or directly above the route line but you can control where the camera points as it moves along the route Click File gt Export gt Route Video Clip This will prompt you to select a route highlight the route you want and press Select Route Next set options for camera viewpoint and clip details Camera Height Specify how many feet above Sea Level or Ground When positioned in reference to sea level the camera will remain at a fixed height When positioned in reference to the ground the camera will move up and down as the contours beneath it change Camera Tilt Tilt sets whether the lens should point up down or straight ahead Specify an angle and select Up or Down 27 When the camera height is measured from sea level see above your Tilt setting is applied to an imaginary horizontal line 0 degrees Examples To look straight ahead specify an angle of 0 degrees To look straight down set the tilt at 9 degrees Down To look down at an angle set Tilt between 0 and 90 degrees Down When the camera height is measured from the ground the camera will automatically be tilted along an imaginary line that follows the contours of the landscape For example if the route ascends a 10 grade the camera will automatically tilt to 10 degrees Up The angle that you type here will be applied in addition to the tilt angle already determined by the landscape In other words if you specify O degr
65. ary drops in elevation This figure gives you an idea of how much of your actual movement will be downhill Compare this figure to the Climbing figure for a good idea of how hilly a trail will be Elevation Change The amount of change between the elevation of the route s starting and ending 38 points Min Max Minimum Maximum Elevations The highest and lowest points on the entire profiled route Latitude Longitude Elevation Grade These figures refer to the position of your cursor on the profile As you move the cursor over the profile graphic these figures will change Grade refers to the steepness of the terrain at the point you clicked White Dots on Profile When you are profiling a Route or a Distance line there will be small white dots along the profile graphic On a route these dots indicate waypoints with the distance tool they indicate the points where you clicked on the map in creating the line Tools for Manipulating Profile Line of Sight Graphics Zoom In Out Scroll ay Zoom buttons are provided in the Profile Line of Sight window so you can zoom in and out on the profile graphic When you re zoomed in a Drag tool becomes available along with scroll po bars so you can pan along the length of the profile A Adjust Vertical Axis Press the Options button to change the minimum maximum elevation against which the profile is pictured see below For line of sight calculations the Options button also lets you sp
66. ation for the Start point and type the coordinates of your point of interest under End Point Then right click on the range bearing line and choose Information This will give you your distance to the location and what direction to head in Supply Range and Bearing to Find Out Where End Point Will Be Under End Point choose Range and Bearing By specifying range and bearing for the End point you can pinpoint locations For example if you want to know what the terrain is like five miles southeast of your present location specify 5 miles for Range and 225 degrees Bearing True then pan the map and inspect the area surrounding the End point Using this method you also have the option of getting the Bearing figure directly from a connected GPS unit Choose Range Bearing from GPS and the end point will be placed at the range you specify and at the bearing in which you re currently traveling Note You must be moving in order for the GPS to supply a bearing Calculating End Point as Function of Time Speed Under End Point choose Time Speed and Bearing This method is useful for predicting your progress if you traveled in a constant direction for a specific amount of time For example to find out where you would end up if you were to travel at a 2 7 mph at a bearing of 149 degrees for two and a half hours just fill in the blanks The resulting range bearing line will not only show you where you would end up but also tell you how far you
67. ave two choices for how these arrows work they can either move you your viewpoint or they can move the landscape This setting also controls the zoom in out arrows above Click File gt Preferences gt 3 D to change the way these arrows work 25 When you first start Terrain Navigator Pro the arrows are set to refer to your viewpoint For example suppose the map is centered on a summit To view the summit from the right click the Right arrow This will rotate the map giving the effect that you are moving around the summit to your right To view the map from higher up click the Up arrow Each time you click an arrow the map image shifts slightly Click the arrows as many times as you need to find the angle you want El El Height Exaggeration Buttons Use these buttons to exaggerate the vertical scale of the 3 D display For example press the Up arrow to increase the vertical scale and accentuate height differences in areas that are relatively flat Or if you re viewing a particularly mountainous region with deep valleys you may sometimes want to decrease the vertical scale with the Down arrow to make it easier to read map data along steep slopes The exaggeration amount is shown on the toolbar at top right corner of your screen next to the latitude longitude display The default setting is 1 5x This means that the elevations depicted are shown at 1 5 times their actual value This makes elevation differences easy to dist
68. aved on the map However you can add on to the END of a track line later by using the Distance tool Select either Distance tool from the toolbar and draw a Distance line where your track left off When you are done adding to the line right click on the distance line and choose Convert to Track In the window that appears select Append From the Name drop down list select the name of this track If you don t know the track s name hold the cursor over the track line and choose Information Press OK The distance line will be added to the end of your track 90 Creating a Route Based on a Track Tracks are great visual tools for showing a trail s location on a map but if you want something to follow with your GPS you will need to create a route based on the track Terrain Navigator Pro provides several options for instantly converting tracks into routes The track line will remain on the map plus you ll have a route to follow in the field The procedure for creating a route from a track is the same as creating a route from the distance line see page 83 for instructions Track Preferences Click File gt Preferences gt Tracks to adjust the default settings that Terrain Navigator Pro will use for any new tracks that you create Category Tracks General Marne Test Reset Numbering Line Style AA Color E width Highlight A Fill Patter Color o Help
69. avigator Pro will take a picture of the map on your screen save it as a JPG image file and automatically open a blank e mail message with the map image attached All you have to do is type your message Notes When you Send a map the JPG file that you send will NOT be saved on your computer If you want to save the image export the map instead If you need more than what shows on your screen use File gt Export gt Active Map Maptech MapServer AA The Maptech MapServer found at www maptech com is our free on line library of topographic maps nautical charts coastal aerial photographs and aeronautical charts The MapServer is a great resource for when you re curious about an area outside your CD map coverage You can view print and e mail maps and charts for free Press the Maptech button on Terrain Navigator Pro s toolbar to go straight to the MapServer an Internet connection is required Navigation controls let you scroll around the maps and charts You can also toggle between different types of coverage and personalize maps online The maps on your Maptech CDs may also be viewed at the MapServer via an Internet connection This makes the MapServer a useful tool for sharing map images with friends and associates Send Link When you re viewing a map click File gt Send Link and Terrain Navigator Pro will automatically open a blank e mail message with a link to this particular map title on the MapServer All you have
70. aving Log Your Track on the Map An Tricio Realtime GPS Tracking alone does NOT save anything on the map after you turn Diles Append Mea off tracking If you want a track line on the map to show where you ve been you can record your track as you move Not only will this track line appear on the map while you re tracking but it will also By time every f Minutes be saved for future reference Points C By distance every To record your progress as a track while By direction change you move click GPS gt Tracking gt Record Track You ll have several options for recording Log Name Assign a name to this track The track will be stored in your track list New This track will be saved under the name you assigned above Append Click Append to attach this track line to any track you previously created For example if you re making a journey over a period of several days with breaks in between or if you re hiking a trail in segments over time you can use this Append feature to add on to the original track line each time When you click Append the Name field becomes a drop down list select the name of the track you want to add to Overwrite Suppose you routinely track your progress on a particular journey and you want to reuse the same track name each time You can click Overwrite and under the Name drop down select the 65 name of the track you want to replace The old track will be deleted from me
71. benefit of an electronic connection it is up to you to ensure that the datum of your GPS matches the datum in which Terrain Navigator Pro is presenting the coordinates To find out what datum Terrain Navigator Pro is using or to change Terrain Navigator Pro s datum setting click File gt Preferences gt General Magnetic Declination As you may know you can set Terrain Navigator Pro to display bearing data in either True North or Magnetic North click File gt Preferences gt General to adjust this setting Terrain Navigator Pro uses a current computer model to calculate the position of Magnetic North This has several implications The location of Magnetic North shifts slightly over time As a result the listing for Magnetic North 118 on a very old USGS map may not agree exactly with Terrain Navigator Pro s calculation Neither the magnetic declination listed on a USGS map nor the one calculated by Terrain Navigator Pro take into account local variances You may need to take this into account when making precise readings To obtain the magnetic declination calculated by Terrain Navigator Pro draw a range bearing line at a O degree angle straight north Use Preferences to set the Bearing North to Magnetic Go back to the range bearing line and get the bearing information The heading shown will be that of the magnetic declination When printing maps you may choose to include a Magnetic North Arrow and or magnetic north li
72. bookmark file containing these lines 043 30 50 5 N 071 45 31 7 W 1 book1 043 30 49 8 N 071 45 32 1 W 0 My House 043 30 48 6 N 071 45 32 5 W 2 School defines three bookmarks that have the names book1 My House and School respectively The first three fields show the Degrees Minutes Seconds of the latitude The N indicates direction North for latitude The next three fields indicate Degree Minutes Seconds longitude with W following to 114 indicate West The number that follows W indicates the zoom level at which you want to view the map 2 1 zoom level the closest in viewing level 1 1 zoom level 1 2 zoom level 1 4 zoom level the farthest out viewing level GO NM Finally the bookmark s name is given in double quotes at the end of the line Be sure to press Return after each line of your file including the last line When you save a bookmark file save it as a DOS text file with the BTX extension Importing Layer Text Files into Microsoft Excel Several Maptech customers have told us that they plan to use Microsoft Excel to manipulate their exported data For your convenience we include the following step by step procedure for opening mark text files in Excel These instructions were written for Excel97 they may need to be modified for use with other Excel versions 1 From Excel s File menu choose Open 2 Browse to the location of your MXF RXF TXF or BTX file T
73. ced if you are using UTM coordinate system and less noticeable if you are using latitude longitude Nevertheless please bear in mind that creating a TXF file with any datum other than WGS84 will skew the accuracy of the coordinates as they are displayed in Terrain Navigator Pro Sample Below is an example of Terrain Navigator Pro s TXF track file format 38 2373733 107 5542683 My Hike ff 38 23 3388 107 5542248 My Hike ff 38 2373044 107 5541813 My Hike ff This shows three track points The first variable is the latitude then longitude track name and color First Two Fields Latitude and Longitude The latitude longitude coordinates are given in decimal degrees For latitude North is a positive value and South is a negative for longitude East is positive and West is negative Latitude Conversion Formula The following shows how a latitude may be converted into various formats Key D Degrees M Minutes S Seconds d Decimal Degrees m Decimal Minutes S Decimal Seconds Abbreviations DMS Degrees Minutes Seconds 43 44 54 18 D M m Degrees and Decimal Minutes 43 44 903 D d Decimal Degrees 43 748384 M m Decimal Minutes 2624 90304 Formula Degrees Minutes divided by 60 Seconds divided by 3600 Decimal Degrees Express this as a formula and you get D M 60 S 3600 decimal degrees Example For example a latitude of 43 degrees 30 minutes 50 seconds would translat
74. ck at a time in which case you may not be able to send a new track log Also some GPS units might overwrite existing track logs in order to accept the new track logs that you send For example say your GPS can store up to 10 track logs and it already has six track logs in memory In a slot based GPS this means it has four empty slots in which to store additional tracks slots 1 6 are occupied and slots 7 10 are available If you send five new tracks the GPS unit might wrap around the track list placing four of the new tracks in slots 7 10 then deleting existing data from slot 1 in order to make room for the fifth new track Track names You should also find out whether your GPS unit will use the track name that you created in Terrain Navigator Pro or whether it will assign the track log a new name Make sure that you don t already have a track log of the same name stored in your GPS for example if you already 70 have a Track1 in your GPS and you send another Track1 to your GPS the GPS unit may overwrite the old Track1 and replace it with the new one Driver Notes For tips and cautions for your particular GPS make and model see the Driver Notes section of Terrain Navigator Pro s GPS Setup window Consult your GPS manual You should also thoroughly read your GPS user s manual and familiarize yourself with storage functions of your GPS unit before attempting any data transfers Notes Some Magellan GPS units supported b
75. d Pocket Navigator for use on Windows PocketPC devices Terrain Navigator Pro can import TXF files from any previous version of any of the Terrain Navigator Pro family of programs Importing Tracks To import a TXF track file click File gt Import gt Tracks In the window that appears browse to the location of the TXF file you wish to import You may only import one TXF file at a time Once the file is selected press Open A message will appear on the screen telling you how many tracks were imported along with the total number of waypoints You cannot import track data if it already exists in Terrain Navigator Pro If you try to import a TXF file that contains track data that already exists in Terrain Navigator Pro you will receive an error message explaining that that track could not be imported This may happen if you created the TXF file as backup but never deleted the original track from Terrain Navigator Pro A single TXF file may contain data for more than one track Track import is backwards compatible which means that you may import TXF files from any previous version of any program in the Terrain Navigator Pro family of programs Track Text File Format TXF The text file format for track import export ends in the file extension TXF To import tracks that were previously exported or track text files that you created by hand go to the Tracks menu choose Import and the select the file where the tracks are sa
76. ddresses Address information is available on Geographic Data Enhancement CD If you didn t receive this CD with your purchase contact Maptech for information Page 11 3 D Video Clips Record AVI video files of a rotating 3 D landscape Page 26 New line styles and widths for all layers that use lines An optional opaque background is now available for marker and waypoint names GPS Setup Wizard An automated setup utility is now available to make configuring your GPS settings quick and easy Click GPS gt GPS Setup Wizard to run the Wizard The Wizard will automatically detect your GPS manufacturer model and the port where it is connected to your computer and will make the appropriate configuration settings in Terrain Navigator Pro Of course you can still configure your GPS settings manually if you prefer by clicking GPS gt Setup New preferences for aerial photos Aerial photo cache size has been increased to 200MB and a new preference setting tells Terrain Navigator Pro to download new photos to the cache when new versions are detected Contacting Maptech lf you have a question and you can t find the answer here Maptech s technical support staff will be happy to assist you Support is available from 9 00 AM to 5 00 PM Eastern Time Monday through Friday Telephone 978 792 1197 E mail support maptech com Fax 978 792 1095 Internet http www maptech com support Maptech s Support site provides software updates plug
77. decided to provide the updated image in its current state rather than not provide the updated version at all Maptech is working with the USGS to repair all the damaged images and provide access to whole versions of all updated images General Preferences To adjust general settings like Category General coordinate format preferred units of Map Displ Control ap Display S measurement true magnetic North Coordinates h EN W Show Toolbar D M S T Siew Empar Ber etc click File gt Preferences gt Tees mana E AD 97 al Shan Wade Use General or press the Preferences dal Showy GS Le button In addition to these map view Bearings True FT Show Tooltips settings the General Preferences M Show GeoTips window also contains options for Height Loca W Zoom Scale adjusting the appearance of the Terrain Navigator Pro window Scrolling Control Size Layers M Live Scroll Small Coordinates Allow Delete All l l l i Edge Arrow Large Terrain Navigator Pro can display coordinates in various formats TIFF Export Options Distance Tool ee Latitude Longitude M Compressed W Tiled Line with Example Degrees Minutes Seconds D M S 43 02 08 N 070 50 36 W Degrees and Decimal Minutes D Help M m 43 02 141 N 070 50 596 W Decimal Degrees DDMM mmm 43 0358203 N 070 8439019 W Universal Transverse Mercator UTM The UTM system uses an imaginary grid of equidista
78. der Version make sure your version of ArcPad is highlighted Press Close when finished Configuration Product Werzlon Ho POA Connected gt 4rclals 4rcP40 Notes e Communication between your desktop computer and About Driver Advanced your PocketPC handheld requires Microsoft Driver Motes ActiveSync software The Successful communication requires that your PDA s software is free and may be operating system must be PocketPC 2002 or later and downloaded from it must be running ArcPad 6 0 1 or later wwwWw microsoft ccom Before using Terrain Navigator Pro s PDA menu make sure that your ActiveSync connection is valid allowing your desktop PC to communicate with your mobile device e For information on ArcPad visit www esri com For details on using Terrain Navigator Pro maps in ArcPad see the Downloads page at www maptech com for a downloadable guide in AdobeO PDF format 102 Sending the Active Map to PDA ix To send the active map to your PDA for use in ESRI s ArcPad program click PDA gt Send to PDA gt Send Active Map Save to PDA You will be prompted for a location to save the PAGO File Store map Save to PDA is preselected with all available PDA storage locations listed highlight the location where you want to save the map If you prefer you may save the map to a location on your desktop PC instead and transfer the map to your PDA at a later time select Save to Desk
79. display a list of all available routes Highlight the route you wish to send to your GPS and press OK You may only send one route at a time Repeat this process to send additional routes Humber f 0 13 Understand Your GPS Unit s Route Storage Options Name Rathy Before sending routes to your GPS be sure that you know how your GPS unit handles route storage SES Help 69 Number of routes Find out how many routes your GPS unit can store Some GPS units might overwrite existing routes in order to accept the new routes that you send For example say your GPS can store up to 10 routes and it already has six routes in memory In a slot based GPS this means it has four empty slots in which to store additional routes slots 1 6 are occupied and slots 7 10 are available If you send five new routes the GPS unit might wrap around the route list placing four of the new routes in slots 7 10 then deleting existing data from slot 1 in order to make room for the fifth new route Route names Make sure that you don t already have a route of the same name stored in your GPS for example if you already have a Route1 in your GPS and you send another Route1 to your GPS the GPS unit may overwrite the old Route1 and replace it with the new one Driver Notes For tips and cautions for your particular GPS make and model see the Driver Notes section of Terrain Navigator Pro s GPS Setup window Consult your GPS manual You should
80. e Lock door The next value gives the route name The field after the route name contains a number specifying the color of this first waypoint The next number tells the color of the first leg of the route and the final number refers to the symbol selected for this waypoint within Terrain Navigator Pro The symbols are numbered in the same order they appear in the Symbols drop down menu from the Edit Routes window starting with O for none the first option in the list The numeric codes for the available colors are listed below light green ffOO forest green 808000 yellow ffff light gray cOcOcO royal blue ff0000 purple 800080 light purple ffOOff navy blue 800000 aqua OO light olive 8080 white ffffff green 8000 dark gray 808080 brown 80 black 0 red ff Once you have created your routes choose Export from the Routes menu and highlight the route that you want to export Be sure to set the file location settings to where you want the file to be saved You may wish to change the default settings If you choose to export several routes at once the resulting file will contain data for all waypoints in all routes grouped by route When route data is exported the original route will still be retained on the map All the characteristics of the route will be preserved throughout the export process so that when the route is imported into Terrain Navigator Pro it will appear exactly as it did when it was exported Any waypoint comments will al
81. e Area Choose Small Medium or Large for the size of the map area to be displayed On some computers a Large area might slow performance If you find that the 3 D rotation tilt controls seem slow choose Small Initial Settings Vertical Exaggeration Vertical exaggeration emphasizes contours making it easier to distinguish differences in relative height differences Terrain Navigator Pro s default setting is 1 5 which means that all elevations are shown at 1 5 times their actual value The lowest setting available is 0 5 which actually downplays the elevations showing all contours at half their true height You can choose varying degrees of exaggeration up to 5 0 times actual height 29 High exaggeration is useful for emphasizing contours in relatively flat areas Since this is an Initial Setting this means that the setting you specify will be automatically used whenever you first enter 3 D View You can of course adjust these settings manually whenever you like but this is what Terrain Navigator Pro will use for your initial 3 D view Initial Settings Viewpoint Height Select a viewing angle for Terrain Navigator Pro to use when you first start 3 D View Choose Ground Low Medium High or Very High Since this is an initial setting this means that the setting you specify will be automatically used whenever you first enter 3 D View You can of course adjust these settings manually whenever you like but this i
82. e towards the center of the loop but only as far as you specify under ok Cancel Help Buffer Size e Outside Buffer The fill color pattern will extend outward from the outer edge of the loop leaving the interior of the loop free of fill Specify width of the color pattern under Buffer Size Waypoint AutoText Applies to Entire Route The AutoText button in the Edit Routes window lets you include location information along with each waypoint name on the map This AutoText works the same way as Marker AutoText described on page 74 79 Editing Waypoints While the Edit Routes Route Waypoints Legs me o window lets you apply here rant settings toa route as a dol Esa Alam whole the Edit ropertiez Waypoints window lets Name wets you modify individual waypoints GPS Mame R1205 To open the Edit symbol Color symbol Waypoints window right click on any Felt Ces o Pont waypoint and choose e rie Edit Route Waypoints Ensure that Waypoints is selected at the top of the window Another Comments way to get to this window is to click Layers gt Routes highlight the route you want to work with and Coordinates press the Edit button Latitude 94 fe f1517 n y On the left side of the window is a list of all _New Delete Reverse Longitude i 20 ho fu gt waypoints in this route Highlight the waypoint you want to edit pts O44 4 05 0 N 07113 3 Wot 22
83. e available colors are listed below light green ffOO forest green 808000 yellow ffff light gray cOcOcO royal blue ff0000 purple 800080 light purple ffOOff navy blue 800000 aqua FOO light olive 8080 white ffffff green 8000 dark gray 808080 brown 80 black 0 red ff Important Notes Be certain to press Return after the final line of your MXF file You must supply all latitude and longitude data in decimal degrees and WGS84 datum Remember to save your text file with the file extension MXF Maptech supplies a free utility called FormatMXF which is designed to automatically correct common formatting mistakes in MXF files To download the FormatMXF utility visit www maptech com Tracks Exporting Tracks You can export selected tracks and save them in Export Tracks text file format elsewhere on your computer system This is handy for sharing your tracks with Rendron Flume Trail Wille other users of Maptech software for keeping backup copies of your data and for using your data in other applications To export tracks click File gt Export gt Tracks Terrain Navigator Pro will display a list of all your tracks Highlight the track s you want to export You can select as many as you want use your Control and Shift keys to highlight multiple tracks When you have made your selections press Save The next window will prompt you to name the file G ave Cancel that contains your exported tracks and specif
84. e square in the center represents the map you re viewing To switch to the map directly to the north click the square above center to move east click the map directly to the right etc You can also use the Adjacent menu which lists all adjacent map titles to select adjacent maps by name The Adjacent menu only appears when you re in Single Map Mode Seamless View Lowbr Suncook Lake Seamless View solves the all too common problem that occurs when your area of interest falls on more than one map In Seamless View the white map collars are removed and adjacent maps are aligned and stitched together forming the equivalent of one large map made up of all the individual USGS maps on the CD This means you can scroll smoothly from map to map without having to open each map individually Seamless View also lets you join multiple maps together in a single print image You can toggle back and forth between these two view modes using the Seamless Single Map toggle button on the toolbar just to the left of the coordinate display Or you can select Seamless View or Single Map View from the View menu Note When in Seamless View the Adjacent Map Control disappears and the Adjacent map list on the menu bar is grayed out This is because in Seamless View you can move from map to map without having to specify which map to open Aerial Photos DL A Fu ME gt aipim Eee me o ii omn A e ee PR ES A PIS A BAS A As a regis
85. e to 43 30 60 50 3600 43 5138888 decimal degrees Here s the math 30 60 0 5 90 3600 0 0138889 00 0138889 00 5000000 43 0000000 112 43 5138888 Third Field Track Name The next item in double quotes is the name of the track This is the same for each line each point in the track Last Field Track Color The final field refers to the color used for the track s display in Terrain Navigator Pro Here are the color codes light green ffOO forest green 808000 yellow ffff light gray cOcOcO royal blue ff0000 purple 800080 light purple ffOOff navy blue 800000 aqua FOO light olive 8080 white ffffff green 8000 dark gray 808080 brown 80 black 0 red ff ESRI s Shapefile Format Terrain Navigator Pro allows you to export markers routes and tracks in ESRI Shapefile format This format is used in a variety of GIS applications To export layer data from Terrain Navigator Pro click File gt Export and select a data type markers routes or tracks Select the layers you want and when prompted to specify an export format choose Shapefile When you export data to the Shapefile format you will receive one or more sets of files When exporting markers you will receive one set of files This file set will include all the markers you selected for export When exporting routes you will receive multiple sets of files for EACH route that you export One file set will contain the route s waypoints A second file s
86. ecify height offsets page 42 Peak Names If your profile line passes over any major peaks press this button to include peak name labels 2 on your profile Center Map on Profile Point Clicked Select this crosshair tool then click on any point along your profile to center the map image on that point Adjusting the Profile s Vertical Axis In addition to zooming scrolling and centering tools the Profile Line of Sight wndow also contains an Options button This lets you adjust the vertical axis of the profile Grayed Out Options are for Line of Sight Fatal datar mda ihat Cirig iee Lee rs When working with profiles half of the Options window is Dsscarndra Ei het Lapak CT AE 2 Oo ar ia le O E grayed out When used with a Line of Sight calculation cima free tor the other options become available see page 41 Automatic Range The vertical axis is the total height range against which your profile is shown By default the Profile window sets the vertical axis to fit exactly within the height limits of the path you re profiling 39 the profile cross section starts at the lowest elevation in your path and doesn t extend beyond the highest point in the path These values are automatically filled in under Vertical Axis in the Options window These figures constitute the Automatic Range The minimum value is on the left the maximum on the right Assigning New Minimum Maximum To assign different
87. ee oo a sii Outline This option controls the width of the line that draws the Tracking ee l i i position icon Thicker lines will make Update every i Second the icon easier to see but will obscure more of the map I CIEEN underneath Several width options Keep centered on re Suspend Screensaver are provided from extra fine to extra position ion while Tracking coarse Color Choose a color to use for the Re center when icon position icon Teas EEE Filled Symbol Checking this option fills the tracking symbol with color making it an opaque symbol rather than an outline This may make the icon easier to see For example when driving you can easily locate a filled symbol by glancing at the map Tracking Update This determines how often your position will be updated on the map Choose an interval between half a second and six seconds For example when the update time is set to four seconds your position will be recorded every four seconds and the icon will be moved every four seconds to the corresponding map location Display These options control how the screen follows your progress during tracking Always Centered The screen is always centered on your location As you move the map image moves underneath the icon that represents your position The icon is always at the center of the screen Re Center as Needed When you start tracking the screen is centered on your location The map image remains sta
88. ees no adjustment will be made and the tilt of the camera will match the grade of the landscape If you specify 5 degrees Up the camera will ascend a 10 grade tilted at 15 degrees 10 5 15 If you specify 5 degrees Down the camera will ascend a 10 grade tilted at 5 degrees 10 5 5 Camera Direction There are three options for setting the direction in which the camera should look Always look in this direction Specify a heading in which the camera should face This is like moving along the route while Keeping your gaze focused in a particular direction For example to continually face northeast specify 45 degrees To face south specify 180 Follow route line with offset of As always the camera will travel along the route line but with this option you can point it in a direction measured from the route line Examples To keep it pointed straight ahead on the route line specify an offset of O degrees To point it off to the right set an offset of 90 degrees Always face specific point with offset of Select this option to record progress along the route while keeping the camera trained in reference to a specific point Type the coordinates of the point in the space provided To keep the camera trained directly on the point set an offset of O degrees For example imagine hiking on the slopes around a summit An offset of O degrees will keep the summit constantly in view at the center of the 3 D landscape For a 3 D view that
89. er following the instructions at the manufacturer s website Note There are two types of generic 3 D rendering methods available for use by graphics programs OpenGL and DirectX Terrain Navigator Pro uses the OpenGL rendering model to create 3 D View Therefore look for a driver that supports OpenGL rendering Things you may run into Uncertified drivers Video card manufacturers often distribute additional drivers often classified as uncertified unsupported special purpose or beta drivers These drivers may not have received the same extensive quality assurance testing as the company s retail generic drivers It s also a common practice to provide beta versions of drivers drivers that may still undergo some modifications before their official release Generally speaking these are drivers that the manufacturer makes available for you to use if you like but the manufacturer cannot offer technical support for their use If you decide to try such a driver and find that it causes display problems you can follow the manufacturer s instructions to uninstall the driver and install the generic supported driver instead It is up to you to decide what drivers to install read all information provided before downloading any drivers 31 Driver requires DirectX Produced by Microsoft DirectX is an extension to a computer s operating system that allows applications to communicate directly with the display controls Applications tha
90. errain Navigator Pro has acquired Elapsed Time indicates how long Position Averaging has been underway When you feel that enough position data has been acquired press the button labeled Create Mark Terrain Navigator Pro will take the average of all positions reported by your GPS since GPS Position Averaging was turned on and will place a mark at the averaged position The GPS Position Averaging window will remain open until you press the Close button Notes e The Start button is relabeled Stop while averaging is underway You can use this button to toggle the position collection process on and off e You can press the Create Marker button as many times as you wish while averaging is underway 68 Sending Data to GPS Markers Send Marker xy You can take markers that you have created within Terrain Navigator Pro and transfer them to your Markers GPS unit The markers will appear as stand alone Bear cave waypoints in your GPS Lair fees Click GPS gt Send to GPS gt Send Markers and Emp l l cli cab a Terrain Navigator Pro will present a list of all spat 2 available markers Highlight those whose locations pot 3 El you wish to send to your GPS Use the Shift or Control key to make multiple selections Shift to select several markers in a row or Control to single out specific markers to send Markers Appear as Waypoints in GPS Your GPS will present your markers as waypoints identified by their GPS name
91. ess Elevation or Grade See page 74 for details Show Marker Name Check here to include the marker name next to the symbol on the map Lock Check here to lock this marker in place on the map To unlock it uncheck this box or right click on the marker itself and choose Unlock Marker Symbol Symbol Color Choose a symbol to mark this location on the map 16 colors are available for symbols Font Font Color Pick a font to use for the marker s full name which will be included next to the symbol Comments Space is provided for you to record notes about this location Coordinates The coordinates of this location You may change these coordinates if you want to move the marker You can also move markers by clicking and dragging them with the Marker tool selected New Delete Press the New button to create a new marker by assigning its coordinates Press Delete to delete the marker that s highlighted in the marker list Marker AutoText AutoText Options ol The AutoText feature lets you a ae include location information along with the marker name on the map C None You may choose to include Coordinates Street Address C Coordinates Elevation or Grade Placement C Prefix Sufix f Street Address Note on Elevation When using Cine ees AutoText to show elevation keep in mind that spot elevations in Terrain Grade Navigator Pro are approximate Cancel AutoText Updates Itself Automatically Au
92. et will contain data on the route line itself If you re exporting a route that is looped that is one that forms an enclosure you will also receive a third set of files for that route describing the polygon formed by the loop When exporting tracks you will receive one set of files for each track line plus an extra set for any track that is looped Examples e f you export three routes one of which is looped you will receive three sets of point files three sets of line files and one set of polygon files for the route that is looped e f you export two tracks one of which is looped you will receive two sets of line files and one set of polygon files for the looped track e All markers selected in a single export will be covered by one set of point files For further information visit www esri com Bookmarks 113 In addition to importing exporting layer data you may also export bookmarks into text file format The text files may be imported back into Terrain Navigator Pro This lets you share your bookmarks with other users of Terrain Navigator Pro keep different sets of bookmarks etc Exporting Bookmarks 1 Open the map that contains the bookmarks 2 Click File gt Export gt Bookmarks 3 Select the bookmarks you wish to export 4 Specify a location to save the bookmark text file If you wish you may combine multiple BTX files into a single file Or you may create your own BTX files according to the Bookmar
93. ether the new map should replace the active map window or the inactive map window The default selection is Replace Active If you don t specifically choose either button for example if you just press the Enter key on your keyboard after using the Find menu or if you open a map by double clicking a map square in the Map Selector grid the new map will automatically replace the active map window Creating a Custom Grid Terrain Navigator Pro lets you place Lategory Custom Grid y grids on the map image to serve as visual aids The Layer Visibility a window lets you opt to include a fixed lat lon grid a map grid showing map borders and a custom grid that you Coordinat j oordimate fo 1e54 can adjust yourself Spacing To specify the size and shape of your r Custom Grid click File gt 5 Tr 39 6 mae a aie Preferences and select Custom Grid You may choose to place your Magnetic grid lines in references to the Coordinate system you have Spacing A fi Miles specified in General Preferences or Spacing Y i Mies y you may place grid lines in reference to Magnetic North X represents the width of the rectangles Y represents their height Note In order for the Custom Grid to co be visible it must be checked in the Layer Visibility window page 33 E mailing Maps Send Map To e mail a JPG image of the map on your screen click File gt Send Map Terrain N
94. f that location Moving FA the cursor over a track line you can find the grade at that R particular portion of the track Over a route leg a GeoTip can display the bearing or distance to the next waypoint Cursor over map Geo Tip shows elevation Resting the cursor on the map image itself a GeoTip can display coordinates elevation etc E E 0439 48 44 5 N 071 19 46 4 W To configure your GeoTips click File gt Preferences gt sl GeoTips Preferences Be x Category lGeoTips Geol ip tor Routes Cursor over are Geo Tip shows lation When cursor le held over Display this information lt Nothing gt gt Point Bearing Start to End Coordinates Elevation Grade Route Mame Total Distance appomt Count Wayport Hame GeoTip for Select the layer or item whose GeoTip you wish to modify When cursor is held over If the layer is made up of more than one part for example routes are made up of lines and waypoints you can set your GeoTips to show different information when the cursor is held over different parts of the whole Display this information Select a value to appear when you hold the cursor over the item highlighted under When cursor is held over Available values will change depending on the layer you have specified 20 Working with Two Map Windows E Terrain Navigator Pro Coastal Malni E z x Mie Vow Pind Took Lyen GR Sieen Woe Hob al
95. for hiking hunting etc 1 100 000 These maps cover a lot more ground They don t provide as much detail but they give a good view of the big picture In addition your Terrain Navigator Pro purchase entitles you to one year of access to Maptech s downloadable aerial photos see page 13 Most are presented at 1 12 000 scale but scales as large as 1 3 600 are available in some areas Select a scale under Map Type When you switch scales you ll notice that the map grid s squares will change size to represent the different amount of area covered by each map at that scale Selecting Maps by Name You can also select maps by Map Name using the drop down menu provided Click on a title to highlight it then press Open Switching to Another CD Region To see the map grid for another CD in the same state just click on another region of the state overview The map grid will shift to that area If you have installed coverage for another state use the CD Library button to select another CD Moving Around the Map any Drag Tool The drag tool represented by the hand shaped cursor symbol is the default tool for moving around the maps just click and drag the map image around on the screen The exact coordinates and approximate elevation of the cursor position are indicated on the Toolbar and are updated as you move Drag Tool Changes to Scrolling Arrow When you hold the drag tool at the edge of the screen the cursor changes to a bl
96. g Layers With Projets ii da dd Nil 34 EN O me et me A A ON A N 35 PINUNO LAYO S as 35 Deletina Laetitia 35 DISTANCGE AREA TOO Sinarcas 36 DISTANCE TO Sustancias 36 Distance ATEST Ito mala o a 36 Converting the Distance Line into a Track cooccccocccccncoconncconccnonccnnnocannonancnnnnnonnnnnnnnnnnnnnannonaninanenes 37 ELEVATION PROFILE LINE OF SIGHT Tasio diaria ads 38 A Pe acl lack E aan euneie ateet eek 38 Tools for Manipulating Profile Line of Sight Graphics cccoocccoccncocnccccnconcnconcnonanononononanononnnonnnnnnnnnnnos 39 Adj sting the Profiles Vertical AXIS Oe 39 KDS ONSON APA A ener te nee ee ene eRe 41 Applying Height Offsets to Sight LING occococcoccnccocncconncconccnonocnnnonnnonannononconanonnnnnnnnonaninnnnnnnnons 42 Enhanced Digital Elevation Dalai rt A A 44 LABELS ANNOTATING MAPS 0 0 cccccceceeceeeeeeeeneeeeseneeeeeeesensenesensoneoneneesoneons 45 BMS pte A A A acuta 45 GING IADGIS esac oasis 45 E A e ro wine Benda iin a A 46 o eR Ta eee Eee ea 46 GEOPINS ATTACHING FILES TO THE MAP cc ceeececeeeeeeeeeeeeeeeneeneeeneeees 48 Creating GEOFIN aaora a pea a ae RO 48 A A 48 GeoPin Placement Based on Time Date Stamp ooccccccccccnnoncnccucnocannnnonnonanonnononnnnnonnnonnnnnnannonannonaninos 49 GeoPin Placement Based on Position Data ccooocccconccocncconnoconnnnanconononnnnonannonannnnancnnnnonannnnnanonns 50 RANGE RINES 51 EQIIAdg Range RI
97. g the track Suppose you took your first picture at a stream crossing ten minutes into a hike You can highlight all your hike photos then click at the track line at the stream crossing Your first photo will be attached to that portion of the track and all remaining photos will be placed in relation to that first photo Using this feature in this way ensures that all the photos will line up accurately with the places they were taken However if you choose to start the file sequence farther down the track line be aware that your later files may not fit onto the track line For example if you place your stream crossing photo at a point ten minutes farther into the hike all the other photos will be shifted accordingly This will mean that any photos taken during the final ten minutes of your hike won t appear on the track line Spread all files evenly along the track Your files will be placed along the track in sequential order at regular distance intervals The earliest file will be placed at the starting track point and the latest file will be placed at the ending track point This ensures that all your files will be attached to the track line and that they will all be visible 49 Moving GeoPins as a Group If you drag and drop multiple files at once you ll be able to move them all as a group Drag any file up or down the track line and all the other files will move too retaining their relative positions in the line You can continue to
98. he prefix for all new markers You can change this prefix if you like symbol Each new marker s name will start mu Ch Sal with the prefix you specify here Color UN Change Symbol They will be numbered so that you can tell them apart This feature is useful for marking multiple instances of the same thing for example Tower Site etc To include sequential numbering at the end of your marker default name select Date Time You may choose to automatically start your marker names with either Date or Time Since Date or Time serves as a prefix no additional prefix space is available Background Color Hare Create Locked AutoText AutoText is location data that you may include on the map along with your marker names AutoText is so called because it will automatically update itself if the marker is moved You may choose Coordinates Elevation Grade or Street Address To add AutoText before the marker name choose Prepend To add the AutoText after existing marker name choose Append 19 Symbol and Font Choose a symbol a font style size and a color for each Reset Numbering As mentioned above your markers are automatically numbered to ensure that all marker names are unique This prevents confusion especially when transferring markers to a GPS If you like you can Reset the numbering to start again at 1 but keep in mind that this may result in duplicate marker names For example if you
99. he reference waypoint The same result could be obtained by specifying a bearing of 270 degrees TO the reference waypoint Creating a Route from a Track Distance Line The easiest way to follow a path of travel with a GPS unit is to create a route If you have a path 83 marked by a track or a distance line that you d like to follow with your GPS Terrain Navigator Pro can convert it into a route for you With this feature you can trace a trail by hand in Terrain Navigator Pro or transfer a track log from your GPS after a day of hiking and easily convert the trail into a route that you can use with your GPS to follow the same trail A GPS track log can show where you have been but you need a route in order to follow a trail with a GPS Right click on the track or distance line and choose Create Route Several automated methods are available Track to Route aes x New Route Properties Mame Long Pond Mountain Create Waypoints By direction change Create waypoints as needed to keep route within i 00 Feet of track line By distance Place waypoints C atleast p Feet at leas jo Feet apart on track line exactly By number How many waypoints f 0 Spaced equally along the track line Spaced as needed for minimal course error For all points Create a waypoint for each track point Cancel Help Creating Waypoints by Direction Change Lets you specify what level
100. hickness to best emphasize your range rings on the map image Show Name The name of your range ring can be displayed at the center point Show Ring Interval Check here to include text at each ring noting the distance from center point This text note will appear at the northernmost portion of each ring Lock Check here to lock this set of range rings in place on the map Unless Lock is checked range rings may be moved by clicking on the center point with the Range Ring tool selected Note Locking a set of range rings only locks the center point The rings may still be edited and expanded or shrunk Notes Space is provided for you to record notes or comments about these range rings Stacking Multiple Sets of Rings on the Same Center Point You can create more than one set of range rings on the same point First use the Centering Tool to place the point of interest in the center of the active map window Then click Layers gt Range Rings and press the New button When you use this method to create new range rings Terrain Navigator Pro automatically centers the rings on the point at the center of the active map window oh es Simply leave the coordinates as they are and a Sy wee 0 50 Miles specify a ring spacing interval ring color etc Each s 40 Wil time you press the New button you re creating another set of rings at this location Tip Use different colors to help distinguish between sets of rings Range Ring Preferences
101. ht fluctuate and if your path of travel contains frequent direction changes your best bet is to record track points by Direction Change Terrain Navigator Pro will base track points on your motion When you re moving in a fairly straight line that portion of your journey might only have two or three track points If you make a switchback turn Terrain Navigator Pro will mark each turning point with a track point This recording method is useful no matter what speed you travel or how far you go You can control your track s accuracy by specifying Minimum Allowable Error the lower the error you allow the more track points Terrain Navigator Pro will record Set the Error amount so that it s low enough for an accurate representation but not so high that you end up with a large number of unnecessary points Reusing Your Track for Navigation If you want to use your GPS to follow this path of travel again in the future you can convert this track into a route then send the route to your GPS See page 83 for instructions 66 GPS Tracking Preferences Preferences O x GPS Position Icon Symbol Select a symbol to SEBO GPs Joes aie El represent your position The symbol icon will be placed on the map at Position cor the coordinates received from your Size Controls the size of the symbol size Medium v Outline Ony used for your position icon Choose S II medium or large Celer gt Line width sen n
102. i ee FI E a E Hi A Tota distance a mies 35 Sie Cbr MES a oe Saree br 35 SEN rei aa Tene heat Longitude 071 15 33 82 w Ground distance 1 miles 328 feet Elevation aroe 1038 feet Elevation 1863 oe ath eee a ea aio 1881 0458 Grade n o Terrain Navigator Pro can calculate the line of sight between any two points on the map To make a line of sight calculation you must first establish the start and end points using either a distance line route or track When using a distance line you can right click on the line and choose Line of Sight For routes and tracks press the line of sight button on the toolbar Note about Routes and Tracks Unless the distance track or route tool is selected the line of sight button is unavailable For routes and tracks the Line of Sight window will portray the selected example of that layer type the route track that you last created or edited To make sure the route or track you re working with is selected simply click on it with the route track tool A dotted line indicates that the route track is selected Data Provided Important Notes e When considering the figures provided it is important to remember that this data refers to the line of sight between the starting point and ending point NOT to the length of the track 41 route or distance line itself The line of sight is shown as a dotted line both on the map image and on the cross section graphic e Line of sight calc
103. ial tooltips that provide location information See page 20 Zoom Scale Check here to allow the zoom function to also switch map scales as necessary to provide the requested view This affects the zoom buttons on the toolbar as well as the zoom in out commands that pop up when you click directly on the map image When this is checked Terrain 18 Navigator Pro will adjust zoom level as requested until the zoom limit is reached and will then switch to a larger or smaller scale map if available to provide the view you want Scrolling When Live Scroll is activated the map picture is updated instantly when the scroll bars are used to move about the map Without Live Scroll updates occur only after the mouse button is released Live Scroll is recommended if you re using a PC with a fast screen update If Edge Arrow is selected the cursor will change to a black arrow when placed near the edge of the map display Once this arrow appears you may hold down the left mouse button to scroll the map slowly in the direction of the arrow Double click the arrow to jump across a larger segment of the map When the cursor is removed from the edge of the map display it will change back to whatever tool you had been using Control Size Sets the size of the Toolbar Compass Control Bar and Help Line To adjust this setting your screen resolution must be set to 1024x768 or higher Allow Delete All Check here to gain the ability to delete A
104. ibility Layers are separate from the underlying map image and separate from each other This means that you can decide which ones to show and which ones to remove from view Click View gt Layer Visibility to choose what layers you want to include on the map This lets you show some layers while hiding others from view Terrain Navigator Pro will store your layer settings from session to session Layers The top half of this wndow lets you remove an entire layer type from view for example you can hide ALL range rings Sublayers The bottom half of the window lets you select specific items to show or hide For example you can show certain range rings and hide others Layer isibility E Layers Check to include the Marker Layer on the map All markers checked in the Sublaper section will be shown ree Highlight the Layer pou want to edit Overlays ick to check Quick wap to chec Range Bearing Lines ALL existent markers Sublavers A list of all your markers x Landina Click the blank checkbox Psublapers of the to remove all these Marker Layer Check Pod ae markers from the Marker the ones that you want x spot2e Laver to show on the map x spot2 i Toggling All Layers On Off If you just want to temporarily hide all layers from view for a clean view of the map press the Layer Visibility toggle button Or click View gt Show Layers This will remove the check
105. ics Full Name GPS Name The GPS Name is automatically created from the Full Name The GPS Name is limited to six characters since most GPS units have a limited number of characters available for track log names CEE Loop Check here to join the end of the track to the beginning forming an enclosure Fill If looped the track s enclosure can be filled with a Pattern and Color of your choice Press the Advanced button to modify the pattern For details see Fill Options page 79 Line Choose a line style dotted dashed or symbols spaced at regular intervals line color and line width If you like you can highlight your track line in one of nine colors Comments Space is provided for notes about this track 89 Appending Tracks To join one track to another highlight a track and press Append then select the track you d like to merge it with The end of the first track you selected will be joined to the start of the second track The first track will be extended to follow the path of the second track The second track will remain unchanged So you will still have two tracks with the same two names but the first track will be longer than it was Deleting Tracks You can also Delete the highlighted track To create a route based on the highlighted track press the gt Route button see next page Appending to a Track As mentioned above the shape of a track line cannot be changed once the track is s
106. ify different symbols for individual waypoints press the Edit button to edit waypoints Line Color Width Style These settings affect the route egs the lines that join the waypoints Select a line color and width along with a line style solid dashed etc Comments A space provided for you to record notes about this route Loop Check here to automatically join the last waypoint to the first Your route will form an enclosure useful for calculating area see Route Information Number This will automatically number your waypoints in sequence on the map Terrain Navigator Pro automatically uses sequential numbers when assigning waypoints default names but you may wish to assign different names This Number option lets you take advantage of automatic sequential numbering even if you have erased the waypoints default names and assigned names of your own Fill Options for Looped Routes Tracks l The Fill Options window lets you specify a color Location Pattern and or pattern for filling looped routes or tracks To 7 reach the Fill Options window right click on a route or track and choose Edit Route Edit Track then Inside buffer check the Loop checkbox and under Fill press Color Outside buffer CE the Advanced button Location Inside The entire interior of the loop will be filled with the color and pattern you choose Inside Buffer The fill color pattern will extend inward from the route track lin
107. ing to include these figures next to the End point These figures will update themselves as necessary if either point is moved Lock will prevent accidental moving of the range bearing line Unless Locked a range bearing line may be dragged to another location Notes Space is provided for you to record comments about this measurement and location 57 New Delete Press New to create an entirely new range bearing line by assigning values as desired Press Delete to delete the range bearing line that s highlighted in the list here in the Edit window Start Point When you create a range bearing line by clicking on the map the coordinates of the point that you clicked are noted here under Start Point You can type different coordinates here if you wish If you have connected a GPS to your computer for GPS tracking you can use your current GPS position as the start point Select Start at GPS Position and the coordinates supplied by your GPS will be inserted in this wndow under Start Point End Point You have several options for setting your line s End point Select an option based on how you want to use the range bearing line To Find Range Bearing to a Specific Point If you know the coordinates where you want to set your End point choose End Coordinates and type them here For example suppose you have the coordinates for a location of interest and you want to know where you are in relation to that location Use your present loc
108. inguish with minimal distortion s 3 D Glasses What s 3 D without 3 D glasses We could not resist adding this feature just for fun Put on your 3 D glasses press this button and enjoy the view Sorry map rotation is not possible in 3 D Glasses view We got dizzy enough just sitting still Viewing a Different Area of the Map In 3 D View Terrain Navigator Pro shows a portion of the topographic map To view a different portion of the map do one of the following Change zoom level press one of the four zoom level toolbar buttons Change to a different map scale again use the toolbar or Use the Map Overview or the Compass Control to move to a different area of the map Using Your Cursor to Rotate Tilt the Map You can rotate and tilt the map image simply by clicking on it and dragging your cursor in the direction you want the map to turn To get a sense of how this works imagine that you are reaching out and taking hold of the map s foreground and moving it by hand If you click and drag to the right the map will rotate counter clockwise If you click and drag up the map s foreground will rise which brings your viewpoint level down closer to the surface of the terrain 3 D Landscape Effects Changing the lighting setting in 3 D Preferences lets you apply different effects to the 3 D display View the landscape in fog or by moonlight or replace the map image with a wire frame or white shading to accentuate the relief
109. ional Parks North Arrow Lines Check North Arrow and a small arrow symbol will appear in the bottom left corner of the printout in a 172 X 2 rectangle The arrow indicates True North with another line at an angle to indicate the location of Magnetic North for the area you re printing This magnetic declination figure will also be given in degrees If you also check With Lines additional lines slanting in the same direction as the magnetic north arrow will be printed within the 1 X 2 rectangle in the corner of the printout This is useful for aligning a handheld compass with the printed map Note The Print North Arrow Lines option is unavailable for use with maps whose orientation is different from the standard North Up orientation Some such maps are found in coverage for Isle Royale and Shenandoah National Parks 1 Ticks Includes small tick marks at one inch intervals across the map vertically and horizontally This is a useful reference for gauging distance and is especially handy for use with the 1 inch n feet notation available by checking Print Summary Scale Bar Check Scale Bar to include a 3 1 2 inch rectangular scale bar graphic similar to the scale bar found on printed USGS topos The scale bar will be printed in the lower right corner of the page The units shown will be based on the scale of printout feet yards miles for English units meters kilometers for 95 metric scale The scale bar will also
110. it s a good idea to try to keep all your track names unique so you can tell your tracks apart 72 Markers A Creating Markers Select the Marker tool from the toolbar then click on the map A symbol will be placed at the point where you clicked If you want to move the marker hold the cursor over the marker until the cursor changes to a combination hand marker symbol then drag the marker to a new location Once you re done creating and moving your marker s switch back to the Drag tool The Marker tool lets you place labeled symbols or markers on the maps to indicate points of interest Terrain Navigator Pro automatically assigns a default name symbol and color for the marker To rename your marker change its color or select a different symbol right click on the marker and choose Edit This will open the Marker Edit window which lists all your markers and lets you edit each one individually Moving Markers You can move a marker by clicking and dragging it First select the Marker tool ZN Hold the cursor A over the marker until the cursor changes to a combination hand marker symbol Click and drag the marker to a new location Another way to move a marker is to assign it new coordinates in the Edit Markers window Edit Markers Click Layers gt Markers to see a list of all your markers and to edit individual Edit Markers i x General Full Hame New Shelter GPS Mame shelt ut
111. k Text File Format Importing Bookmarks 1 Open the map for which the bookmarks are intended 2 Click File gt Import gt Bookmarks 3 Browse to the location of the BTX file you wish to import and press Open All bookmarks for the map you re viewing will be imported If the BTX file contained any bookmarks that could not be imported i e any bookmarks for other maps a message window will let you know Bookmark Import Results Import Results Be xj When you re importing bookmarks you must first open the map that contains the bookmarked locations The easiest option is to open a 1 100 000 scale map in order to cover a wide area Imported 4 new bookmarks If any bookmarks could not be imported this window Bookmarks for the following maps were not loaded lets you know which map s they were for Switch to the BAR HARBOR 1 100 0001 specified map to import the related bookmarks SEAL HARBOR 1 24 000 SEAL HARBOR 1 25 000 Bookmark Text File Format Bookmarks let you save a specific map view so that in one step you can quickly return to the same screen later it will even be displayed at the same zoom level Bookmark files can be created and edited in the Windows Notepad program or in a word processing program They can also be created with Terrain Navigator Pro and exported A bookmark file has the extension BTX The format of these text files commonly referred to as ASCII files is shown below A
112. k into Drag mode if you need to move the map Inserting a Waypoint First select the Route tool then hold the cursor over the route line where you want to insert the new waypoint The cursor EN will change to a plus symbol EEN You can then click to insert a new waypoint in that location Note The new waypoint that you insert will be assigned the next number available For example if a route contains four waypoints and you insert another the new waypoint will be called Waypoint 5 regardless of its position in the route You can modify the names of your waypoints as you like right click on a waypoint and choose Edit Route Waypoints to change name symbol color etc T Moving a Waypoint With the Route tool selected hold the cursor over the waypoint until the cursor EN changes to a hand symbol vy Drag the waypoint to a new location Appending to a Route To continue building on to the end of an existing route right click on any waypoint and choose Append to Route You can then pick up where you left off and add as many waypoints as you like Looping a Route To join the last waypoint to the first right click on any waypoint and choose Toggle Route Loop If your route forms a single enclosure you can find out its area by right clicking on any waypoint and choosing Route Information To unloop a route just Toggle Route Loop again Reversing the Order of Waypoints To reverse the waypoint sequence
113. ked and displays those coordinates here You can change these coordinates if you like To change your coordinate format click File gt Preferences Center on GPS Position If your GPS is connected you can opt to center range rings on your GPS position This is especially useful during realtime GPS tracking to help you gauge distance and required travel time 52 Ring Spacing Set by Distance Specify how far apart the rings should be For example suppose you want to find the closest body of water to a given location You could set range rings every quarter mile and compare the locations of ponds lakes etc to see which are closest to the center point Set by Time This is useful for predicting progress at different speeds Type a speed and specify a time increment For example you might choose show distance traveled every 15 minutes at 45 mph to anticipate your progress and plan stopping points If you have chosen to Center on GPS Position the Speed figure will be your actual speed updated as necessary when you speed up or slow down This way when you slow down the range rings will move closer together since you wont travel as far at the slower pace When you speed up the rings will expand because you ll be able to cover more ground if you sustain a higher speed Display Options Ring Color Sixteen colors are available Line Style In addition to solid lines various dashed line options are provided Line Width Adjust line t
114. lation Height Choose the units of measurement Terrain Navigator Pro should use when presenting elevation data Check Local and Terrain Navigator Pro will always use the same units of measurement as the map you re viewing the active map In other words if you re viewing a map whose contour interval is 20 feet all elevations will be given in feet Check Feet or Meters to always use those units regardless of the active map s contour interval Controls Check the controls you want to show uncheck the ones you want to hide from view Removing controls increases map display area Toolbar The row of buttons along the top of the window just underneath the menu bar Compass Bar The compass bar is the panel along the left side of the window which contains the Compass Rose Map Overview State Overview One Window Two Window buttons and Adjacent Map Selector Help Line The gray area along the bottom of the screen Hold your cursor over a menu item or a control and check the Help Line for tips and notes about that function GPS Line An extra Help line that comes into view when your GPS is connected It provides notes on your connection status and what tasks your GPS is performing Tooltips Tooltips are the little yellow text flags that appear at your cursor position when you hold the cursor over a toolbar button or other control Tooltips help you distinguish buttons and serve as reminders of different program functions GeoTips Spec
115. le 101 Sending Maps to PDA for use in ESRI ArcPad Terrain Navigator Pro can supply maps for use in ArcPad a mobile GIS mapping program developed by ESRI that may be run on a handheld computer PDA If you own a PDA running Microsoft s PocketPC operating system 2002 or later equipped with ArcPad 6 0 1 or higher you can send maps from Terrain Navigator Pro to your PDA for use in the field Terrain Navigator Pro can also provide additional data including NGS data sheets and elevation data For information on ArcPad visit www esri com For details on using Terrain Navigator Pro maps in ArcPad see the Downloads page at www maptech com for a downloadable guide in Adobe PDF format Future Updates May Add More PDA Options Terrain Navigator Pro version 6 04 introduces the PDA interface for ArcPad use only Future versions of Terrain Navigator Pro may extend the PDA interface to other PDA applications including programs developed by Maptech In addition you may have noted that Terrain Navigator Pro s PDA menu contains options to send and receive marks waypoints and routes These options while unavailable in version 6 04 may be activated in future software updates Please visit www maptech com for the latest news and software updates PDA Setup XJ To configure Terrain Navigator Pro for use with your PDA click PDA gt Category PDA Setup Setup or File gt Preferences gt PDA Setup Under Product select ArcGIS ArcPad Un
116. lect for AutoText will update itself if the label is moved For example if you set AutoText to show grade and then you move the label from a hillside to a flat area the grade figure will change accordingly The AutoText data refers to the point at the end of the label s tail If your label uses a Balloon border the tail is always visible For any other Border types the tail is only visible when you re creating or editing the label with the Label tool You can use the label tool cursor to move the end of the tail Setting Defaults for AutoText You can set preferred AutoText for Terrain Navigator Pro to use every time you create a label To specify your preferred settings click File gt Preferences gt Labels Including Date or Time in Label Text In Label Preferences you may set Terrain Navigator Pro to use the Date or Time for the text of your labels This is similar to the AutoT ext feature Label Preferences Preferences General Default Mame Text AutoT ext Append Coordinates none Font Preview Change Font Test Color ae Background Color x Click File gt Preferences gt Labels to specify preferred font border and colors to use for your labels Whenever you add a new label to the map Terrain Navigator Pro will use the settings you specify here You can of course change individual labels as you wish Default Name The Default Name is what Terrain Navigato
117. make these group adjustments until you close Terrain Navigator Pro once the program is closed the GeoPins are fixed in place and if you want to move them again you will need to move each one individually IMPORTANT NOTES Use of this feature can create an impressive map display but for successful GeoPin placement there are several requirements e Your camera must be set to the proper date and time Otherwise the photographs you take will bear an incorrect time date stamp and will not match up to the track line Be sure to remember to adjust your camera for Daylight Saving Time e Your GPS must be capable of recording a track log with a time date stamp At this writing only certain units manufactured by Garmin Brunton and Magellan meet this requirement e Even these compatible GPS models might have further restrictions to keep in mind For example tracks stored in GPS memory may lose their time data Garmin units have slot based track storage allowing you to store a set number of tracks in memory but time data is not preserved for these stored tracks In these models it is only the Active Track that contains time data Research your GPS unit s behavior or experiment with uploading active and stored tracks to Terrain Navigator Pro to determine how time data is handled in your GPS unit To check whether a track on the map has time data right click on the track and choose Information GeoPin Placement Based on Position Data Geam Pereme
118. mark 33 from the Show Layers menu item and remove all layers from the map display Simply recheck View gt Show Layers to restore the layers Hiding Individual Layers You can right click on any layer and choose Hide to temporarily remove it from view This lets you create and view other layers in the same area without overlapping To bring the layer item back into view click View gt Layer Visibility or locate the item via the Find menu which will automatically restore the item to view Organizing Layers with Projects ULES SS es A Sawi RAA x fee ie vio be a LS A a f lt Default gt Magalloway 06 1 4 Clark site Martin s Hundred Sandwich Notch Shelters Templeton Active Project Clark site Mer Oper Rename Delete Close Help A Project is a set of layers By storing your layers markers range rings tracks etc in different Projects you can group and organize your layer data Every layer you create is stored in a Project A Project may contain multiple types of layers For example you can create a Project to store all your track logs from a hiking trip or save line of sight and range rings for a particular job site or group a set of GeoPins linked to a collection of photographs etc When a Project is in use no other layers are shown If you work often with a particular map area Projects can help you keep the area from becoming cluttered with layers When you fi
119. mbol will be placed at intervals along the route line Width Width of the route line Highlight If you like you may apply highlighting to the route leg Choose from nine colors Delete Deletes the highlighted leg The previous leg will bridge the gap created by this removal Reverse Reverses the order of waypoints and legs from last to first This is useful for making the return trip of this route and coming back to the starting point 82 Printing Waypoint Range Bearing Information For a printed copy of the distance and bearing between waypoints print the map containing this route and check the Layers checkbox in the Print window This will print additional page s with your route data See page 93 for more about printing Adding a New Route Leg In the Edit Route Legs window the New button lets you add a new route leg This is accomplished by adding a new waypoint at the range and bearing that you specify To get to the New Route Leg window right click on the route and choose Edit Route Waypoints select the Legs button at the top of the window then in the Edit Route Legs window press the New button First highlight the leg where you want to insert the new waypoint thereby creating a new leg Then press New Reference Waypoint Your new waypoint will be placed in reference to this existing waypoint The reference waypoint is the waypoint that was highlighted in the Waypoint List in the previous window To
120. me Size For Size you can choose to define a Scale or a Percentage 93 By default the Size control is set to Percentage When the Print wndow appears the percentage is set to match whatever zoom level you had been using to view the map 1 1 zoom level corresponds to a 100 size 1 2 zoom level corresponds to a 50 size and so on You can type a specific percentage When the percentage is increased a smaller section of the map will be printed but zoomed in at a larger scale When the percentage is decreased a larger area will be printed but zoomed out at a smaller scale Scales below 25 or above 1000 are not recognized Printing at 100 will produce a map at actual size the same scale as the original paper map for 1 24 000 series map 1 inch 2 000 feet To include a 1 inch n feet note on your printout check Summary If you prefer you may instead set Size to Scale to type a specific scale such as 1 30 000 as shown here When the print size is adjusted the size of the blue box will change This is because more or less of the map can now fit on the printed page Remember the area indicated by the blue box is the full printed paper The size of the page does not change just the amount of map that will be fit onto the paper Quality Each printer determines its own quality setting This is usually expressed in DPI dots per inch and the higher the number the better the print quality Since printing a f
121. me websites for coordinate sharing Your routes will be retained in Terrain Navigator Pro Exporting routes does not delete them from Terrain Navigator Pro It simply creates another version of your route data in a text file format You can share your RXF data with other Maptech software users To import routes into Terrain Navigator Pro just click File gt Import gt Routes and browse to the location of the RXF file The imported routes will be added to your route list and will appear on the maps Routes exported from Terrain Navigator Pro may be imported into various Maptech programs including Terrain Navigator Pro recreational version Terrain Navigator Pro for GIS CAD Offshore Navigator marine navigation software Chart Navigator marine software for trip planning and Pocket Navigator for use on Windows PocketPC devices Terrain Navigator Pro can import RXF files from any previous version of any of the Terrain Navigator Pro family of programs 105 Importing Routes Look tn 3 hikes a El longpondmin ti indianpass rif oliverianbrook rxF southmeadow re File name olivenanbrook rf E iste M ins ork Files of type Route Esport File ReF Cancel ES To import an RXF route file click File gt Import gt Routes In the window that appears browse to the location of the RXF file you wish to import You may only import one RXF file at a time Once
122. min max values for the profile uncheck Automatic Range You can then change the values as you wish Type new numbers or use the sliding levers The shape of the profile will change as the vertical axis changes The original min max figures are shown for your reference To return to the original setting recheck Automatic Range Note Axis Adjustments are Not Retained Please note that any adjustments that you make are NOT retained after you close the Profile window 40 Vertical Axis Automatic Range 0 000 ft 4112 tt Sig fo to E288 f 1366 ft Line of Sight Line of Sight E a oat AS az re y i E ee ee k ue ro paese HENAO oi a enais A A aa aa y 7157 os cS oo rn e a oii i r AN Lee rad AAA A A a Le rn e or o a a as Y O Se Lee LE F AE F uT Yrs is UE i i Tho F a es Peat A pote T AE ian IEF p hae f A ha i a s Li a E gt y i y cit Chie p a ys ed A e Binve rye ONE a o Pete cect Lege a Danes e cr ss A a TE T br Lie Lee eo A Peery Le petits Y p Ree Ye Al r f I f ret E E a r A oa A HITE A a q A ot al 7 i T i 4 ye A i m m 4 y Ferae of pte 1 cays Ve USS gd Y e cl e cet tee rat e eee pace ne ree hy ee ees A Diageo pala k k E T EU KIHE Y A Me tere ty H i Rif y o A e y ie ini gi ei ae PLES ae ln See Y y A a A 1 i Poy Frae q ee vate 1 a Le x E TF ifs br F F mar TLL Srv tower a o ed cre oe tem y I Aj ee ie Fi Trot E AS TL rte PAH Pa vir e
123. mory and replaced with this new track saved under the same name Points Each time you record your GPS location your coordinates are saved as a Track Point These points are then stitched together to form a line or Track Log Select a recording method to determine how often Terrain Navigator Pro should record your position There are three recording methods available By Time If you plan to move at a fairly constant pace and direction you may want to record your position at regular time intervals This will result in fairly evenly spaced track points thereby creating an accurate representation of your travels Specify an interval that s reasonable for your pace and direction In general if you re moving fairly slowly you won t need to record your position very often In such cases set the recording interval to give yourself enough time to move an appreciable distance from your last recorded point The faster you re going the more frequently you ll need to record your location in order to get an accurate record of your travels By Distance If your speed fluctuates or if you anticipate occasional stops you may want to record your progress by Distance Terrain Navigator Pro will wait until you have moved the specified distance before recording each new track point This way you can avoid collecting multiple points in the same general area something that otherwise may happen whenever you stop moving By Direction Change If your pace mig
124. nclude the route line waypoints and any visible waypoint names on the 3 D landscape in the animation 3 D Preferences Click File gt Preferences gt 3 D to configure options for viewing maps in 3 D Preferences Categor 3 0 3 D Landscape Initial Settings Lighting Daylight a Vertical Exaggeration 1 5 Area Medium Mewpolnt Height Medium 3D Arrow Controls Hardware Acceleration Clicki i ICRI OF AMAS Wl J Use 2 0 Hardware Move Viewpoint Acceleration When Available Move Landscape xl 3 D Landscape Lighting You can apply different effects to the 3 D landscape Use these options to improve contour visibility or to simulate different weather conditions or times of day Daylight The standard lighting mode This is Terrain Navigator Pro s original default 3 D lighting mode Fog Shrouds the landscape in a simulated fog Fog is thickest at the most distant portions of the map White The topo map image is removed and the landscape is portrayed in white and shades of gray looks like a moonscape Moonlight Darkens the terrain Wire Frame The actual topo map image is replaced by a wire mesh pattern Removing the map detail helps draw attention to the contours themselves Overhead Positions the light source directly over the map which changes the shadows Overhead lighting is useful for brightening relatively flat areas so you can see the map details better 3 D Landscap
125. neral and uncheck Show GPS Line GPS Status Light When your GPS is connected you ll be able to tell GPS status at a glance using the GPS Status light at the bottom of the screen If the light isn t visible check Show GPS Line in General Preferences The GPS Status light has four possible states that is there are four different ways that it can look lts color and appearance change as necessary to reflect the status of your GPS unit You haven t requested GPS communication If you want to use your GPS signal for realtime GPS Tracking click GPS gt GPS Tracking gt Start Tracking lf you want to transfer stored coordinate data or if you just want to test GPS communication click GPS gt Connect Your GPS is on and is working properly A green check mark indicates that your GPS is properly configured that it is receiving adequate satellite signals and that it is capable of providing an accurate position fix Note The green check mark doesn t mean that Terrain Navigator Pro is using the position data It simply indicates that the GPS is receiving adequate satellite signals 1 Your GPS is configured properly but it doesn t have enough satellite signals to fix your position If this yellow exclamation point appears during GPS Tracking you should make sure your GPS antenna is properly connected and make sure that the antenna has a clear view of the sky in order to pick up as many satellite signals as possible
126. nes in the lower left corner of your printout This can come in handy if you use a handheld compass in conjunction with your printed maps Map Accuracy Raster Images The map images on Maptech topographic CDs are raster images which means they are pixel based A pixel is the smallest building block of the image on your screen If you adjust your screen s resolution this setting is usually found in the Control Panel or under Start gt Settings depending on your version of Windows you are adjusting the number of pixels it can display at one time For example a screen resolution Desktop area of 800 X 600 means that the screen can display images up to 800 pixels wide and 600 pixels tall Coordinate Display is Referenced to Pixels When you use Terrain Navigator Pro to find the coordinates of a map location the coordinates are calculated for the pixel nearest to your cursor The accuracy of these coordinates depends on the scale and accuracy of the map image you re working with The popular 7 5 minute topographic quadrangles usually the most detailed map scale found on Maptech CDs provides map coverage at a scale of 1 24 000 On the original USGS paper maps in this series one inch on the map represents 2 000 feet on the ground 1 24 000 means that 1 inch on paper 24 000 inches on ground 24 000 inches 12 2 000 feet Terrain Navigator Pro samples these maps at 160 dpi dots per inch This means that the map image uses a row of 1
127. ng image may include non map data Save Map Information File Check this box to create a text file with data specific to the exported image including chosen projection zone datum etc This file will be saved with the image Export DEM Export BIL 99 These options allow you to export the elevation data in DEM or BIL format DEM format is the USGS elevation format standard and may be used in GIS applications BIL Band Interleaf by Line is another elevation format used in GIS When choosing BIL format the resulting exported data will include in addition to the BIL file a projection file PRJ a header file HDR and a statistics file STX Reset Defaults Terrain Navigator Pro automatically sets the options in this window to whatever parameters appear most likely in accordance with the characteristics of the selected map area You can of course change these selections If you decide you want to cancel your selections and return to the original default settings press Reset Defaults Terrain Navigator Pro supports the export of images in a variety of TIF file formats as well as BMP format see graphic below These options are dynamic and will change depending on what projection method is chosen for an exported image In addition to single map export Terrain Navigator Pro also provides a batch export feature letting you export multiple maps at once Available File Formats When you have selected your export o
128. nge Ring tool to grab the rings and pull to expand the rings or push to shrink them To move the entire set of rings grab the center point and drag the rings to a new location To lock the rings in place at their current size right click on them and choose Lock 51 Editing Range Rings Range Rings Hame ER Brookings Created Fri Sep 13 12 42 19 2002 Newington Office En route Rapid City Mt ve hittier Center Point Newington Office e phone zone 0 Center on coordinates below C Center on GPS Position Latitude a3 fir f55 53 n Longitude pi e 39 68 w Ring Spacing f SET BY DISTANCE SET EY TIME Draw a ring every Show distance traveled every E Miles E 000000 Minutes from center It traveling at this speed Mo of Rings E 2 000000 MPH Display Options Ring Color Show Name Line Style eee ee M Show Ring Interval Un width IA Lock To see a list of all your range rings and to edit ring characteristics click Layers gt Range Rings All your range rings are listed in the left side of the window Highlight the range rings you wish to edit Press the Delete button to delete that set of rings Press New to create a new set of range rings by supplying center point coordinates Center Point Center on coordinates When you create range rings by clicking on the map Terrain Navigator Pro centers the rings on the point that you clic
129. nie e ea teen oaaid ad ea a 105 MAKO es etna e O dase aa atod eeuat edna aioe ten at ac aan 108 WMACKS A A A hase saeiaas 110 EsSris onapetle Formal ici ica 113 OA PE UE 00 A Siena eessmeoe ae naadua Seutat uid ndete eet anyeenees 113 Importing Layer Text Files into Microsoft EXCel ccccccccssecceseceeeeceececeeeeseeceueeseusessusesseeseusesseeeaes 115 ABOUT MAP Sirini aaa 116 Map MOa UON n aa e r a a a ido 116 BeENCNMAKS orae Nc E oia 117 DAWN raa a n n e a a A E A E 118 Magnetic DECIINAION ostia a aa a a a a tonne eemesinee 118 MapD ACCURACY asarni ara a a i EAG 119 Introduction Welcome to Terrain Navigator Pro What s New Terrain Navigator Pro 7 0 brings you Export of markers routes tracks to ESRI s Shapefile format Save your data in ESRI s SHP file format for use in a wide range of GIS programs Page 113 Access to higher resolution aerial photos and updated topo maps where available Click File gt Map and Aerial Photo Updates via Web to check for updated aerial photos topographic maps online and download any new versions that are available In addition some photo coverage is available in color 3 D Route Animation Record an AVI animation file showing progress along any route shown in 3 D View Page 27 Expanded management of Projects You can now rename projects export them for storage or sharing and import other people s projects Project name is noted in program title bar for reference Page
130. nit is able to transfer data via the manufacturer s software it will not work with Terrain Navigator Pro either If your unit will not function with the manufacturer s software or if you do not have this software contact your GPS manufacturer for technical advice on connecting your GPS unit to your computer Contact Maptech If you have tried these suggestions and still have trouble establishing or maintaining a GPS connection Maptech s technical support staff will be happy to assist you Support is available from 9 00 AM to 5 00 PM Eastern Monday through Friday Telephone 978 792 1197 E mail support maptech com Fax 978 792 1095 Internet http www maptech com support Maptech s support site includes an interactive question and answer wizard as well as an online technical support discussion forum where Maptech software users and technical support staff can share information suggestions and comments 63 Using HyperTerminal to Check your Equipment Connection HyperTerminal a standard Windows accessory may be used to monitor the flow of data at your COM port Use HyperTerminal to determine whether your problem is equipment related 1 Close Terrain Navigator Pro 2 Set your GPS unit to NMEA output Garmin users choose NMEA NMEA from the GPS s Setup Menu Magellan users choose NMEA 0183 2 0 from the NMEA menu Refer to your GPS unit s manual for instructions if necessary 3 Start HyperTerminal From the Windows Start
131. nits Determines the georeferencing information These options will vary depending on what projection settings you specified in the Export Map window If you chose to Rectify the map image you will be prompted to choose a coordinate system DMS D M MM D DDDD For all other reprojection methods you may choose Feet or Meters in which Northing and Easting measurements will be presented In all cases you may also choose User Option which will place a control on the web page letting the site user select his preferred measurement units You may also choose None which will result in a non georeferenced map image Note Layers will not be included in the exported image Multiple Map Export In addition to single map export Terrain Navigator Pro also provides multiple map export which lets you apply the same settings to multiple maps and export them all with a single command Click File gt Export gt Multiple Maps Copy Map to Clipboard Click File gt Export gt Copy to Clipboard to take the map area that you re viewing and place it on the Windows Clipboard This image can then be pasted into most other Windows applications by selecting Paste from the application s Edit menu Copying to the clipboard is especially useful when you wish to use map images in a program that does not support the image formats available for exporting maps And unlike an exported map the map image copied to the clipboard will include any layers presently visib
132. ns that you may import MXF files from any previous version of any program in the Terrain Navigator Pro family of programs Importing an MXF file that contains markers that are already present in Terrain Navigator Pro will result in duplicate markers Marker Text File Format MXF If you have coordinate data that you would like to transfer to Terrain Navigator Pro for display as markers you can create MXF files using Windows Notepad Wordpad or a word processing program Terrain Navigator Pro handles internal data conversions in WGS84 datum When you export data from Terrain Navigator Pro the coordinate data in the resulting MXF file is given in WGS84 datum Therefore when importing marker data into Terrain Navigator Pro be sure to use WGS84 datum when creating your MXF text file Using a datum other than WGS84 will affect the accuracy of the coordinate locations in Terrain Navigator Pro Format In the MXF mark text file each mark is described on a separate line Each line contains several fields of information about that mark These fields are separated by commas and presented in the following order Latitude Longitude Full Name GPS Name Comments Color Symbol Sample 43 7601389 071 2791299 Cottonwood Cttnwd A very large tree 800080 137 43 7617236 071 2917695 Fencepost Fncpst 808080 14 43 7576237 071 2888850 Aspen Aspen ffff 137 43 7562457 071 2777147 Cache Cache
133. nt perpendicular lines to divide the globe into 60 zones Position is indicated in meters within a zone 17 Example 190349787 E 47 66 227 N Military Grid Reference System MGRS Uses a standard scaled grid square based on a point of origin on a map projection of the Earth s surface in an accurate and consistent manner to permit either position referencing or the computation of direction and distance between grid positions Terrain Navigator Pro allows you to specify 1 meter 10 meter 100 meter and 1 kilometer MGRS grid intervals Grid positions are calculated based on the MGRS 3 specification Example 19TCH4978766227 1 Meter Grid Datum Select a datum for use in calculating coordinates It is important to know the datum of any coordinate data before relying on it for navigation Terrain Navigator Pro can display coordinates in the following three datums NAD27 North American Datum of 1927 NAD83 North American Datum of 1983 WGS84 World Geodetic System of 1984 You may also specify Local which will cause Terrain Navigator Pro will default to whatever datum was used in creating the map you are viewing Note This setting is not available in Seamless View since the seamless map display may encompass more than one map title Bearings Specify whether Terrain Navigator Pro should calculate bearings from True North or Magnetic North See Magnetic Declination for important notes on Terrain Navigator Pro s magnetic north calcu
134. o Test old cabin site markers characteristics Highlight any marker in the list to change its name symbol color etc You can also open the Edit Markers window by right clicking on a marker and choosing Edit General Full Name GPS Name The full name appears in the marker list in this window and may also be included on the map image The GPS Name is Tower 493 Symbol Color o Symbol Font Color o y Font i Show Marker Name Comments Proposed location for shelter to replace collapsed cabin 1442 lean to structure partial front wall stone fire ring 275 Ft from trail and 400 ft from pond Coordinates Latitude pa mi e 29 65 w veo designed for GPS use when you send markers to your GPS they will be listed by their GPS Names in your GPS Since GPS units use a limited number of characters for naming locations the GPS Names that Terrain Navigator Pro generates are no more than six characters long In addition they are guaranteed to be unique so that no two markers share the same GPS Name This prevents any confusion when using markers with your GPS in the field Keep this in mind if you assign your own GPS Names and make sure all your GPS Names will be easily recognizable when you re out using your GPS in the field AutoText The AutoT ext feature lets you include location information along with the marker name on the map Choose Coordinates Street Addr
135. o bring the file into view you may need to specify All or Text Files under Files of Type at the bottom of Excel s Open window 3 The next window that appears will offer you two choices Choose Delimited and press Next Under Delimiters check Commas Press Next In the final window you may leave the Column Data Format settings as they are unless you have a preference here and press Finish es Your layer data may now be edited and saved in Excel s spreadsheet xls format 115 About Maps Map Information To get data about the map you re viewing click File gt Map Information The data provided is taken from the original paper map s collar the white border where the USGS prints technical information if you re viewing maps in single map mode you can read the collar for yourself The Map Information window is a quick way to see all this data in one place CD Name The name of the Maptech CD that contains this map Map Name The official name of the USGS map Each map is named for the most notable or prominent feature contained in its coverage a city or town a summit etc Reference Code The USGS has assigned each map a unique reference code This number indicates the quadrant covered by the map Each element of the reference code has a specific meaning Example The reference code 41077 B3 TF 024 tells you the following 41 the map s coverage area is found at a latitude of 41 degrees 077 the map s
136. ordinates in the same datum as the printed map The two sets of coordinates should always match within five tenths of a second If you should find any map title that does not meet this requirement please contact us If a georeferencing error is found we will issue a correction 120
137. ould keep in mind that Terrain Navigator Pro is gauging distance by the track distance line and that the resulting route legs may not be of equal length Spaced as needed Terrain Navigator Pro will place the requested number of waypoints at whatever locations best follow the path of the track distance line Notes You can generate as many routes as you like from a single track distance line The original track distance line is NOT deleted When creating waypoints by distance the final leg may be shorter than requested unless the total path length happens to be exactly divisible by X feet 85 Route Preferences Click File gt Preferences gt Routes to Category Fioutes adjust the default settings that Terrain Navigator Pro will use for any Default Names new routes you create Route Test Rte Reset we Mi Default Names ooo Test ida You can set Default Names for AutoTest Append None oe F Terrain Navigator Pro to use for all your route names and or waypoint names Select Text to assign a specific default name Rte and Wpt are suggested Alternatively you can choose Date or Time and dle BENE the route waypoint names will automatically start with the date time wW appoints Highlight Calar e of their creation To include olor MU mb sequential numbering at the end of Fill your waypoint default names select Poite colar a Text Date or Time Help You can
138. pecify a font style and size Text Color All text in your label will be this color Background Color The area underneath your label text will be this color Background Color is unavailable when no Border style is selected 47 GeoPins Attaching Files to the Map Add GeoPins to your maps to serve as links to other files websites images etc For example place a GeoPin at a trailhead to link to a Word document with a trail description Use another GeoPin to attach a link to a website with local weather reports for the area you marked GeoPins use the Microsoft designed file type icons you re already familiar with Double click on a GeoPin icon to open the linked document or file Creating GeoPins Drag and Drop A quick way to create a GeoPin is to drag a file icon from another window and drop it directly onto the map image For example drag a Word document with a trail description from your My Documents folder and place it on the map image at that trailhead Browse to Target File Use the GeoPin tool to click on a map location either select the GeoPin button from the kd toolbar or right click on the map and choose Tool gt GeoPin When you click on the map the New GeoPin window will open use the Browse button to locate the file you want to attach to this location Editing GeoPins You can rename a GeoPin add notes about it link it to a different document etc Right click on the GeoPin and choose
139. points that you clicked Add as many segments as you like When you click and hold the mouse button down the total Path Length is noted at the bottom of the screen as you add segments If you re using the straight line Distance tool you ll also see Segment Length and Bearing Tips for Using the Distance Tools 4 To back up and erase the last segment you drew press the Backspace key You can press the key multiple times to remove more of the line To temporarily switch to the Drag tool hold down the Control key on your keyboard To delete the entire line press the ESC key To create curved lines with the Freehand distance tool just click and drag the cursor Distance Area Information 36 b Distance Information E E z i a are se 22 wr N om 28 35 sg State elevation a A100 fect a 361 14 4 N o 2 a 23 w IIS moesson am Het 5209 feet al a E a O 1 587 k jmeters Projected Area Moan area sa uncosed pat lo To get precise data about a distance line right click on the line and choose Information The Information window gives you the Projected distance of your distance line in both English and metric units Projected distance is as the crow flies it does not take ground contours into account For ground distance press Profile Projected area is also given IF the entirety of your line forms an enclosure The start and end points must meet and the line must not cross back over itself or overl
140. ptions press OK to specify where you would like to save the exported map and to specify a file type 100 TIF ArcView TFW For use with ArcView GIS software This file format creates a TFW World File that retains georeferencing information so that it can be translated from one application to another TIF MapInfo TAB For use with MapInfo GIS software This file format creates a TAB file that retains georeferencing information so that it can be translated from one application to another TIF GeoTIFF Geographic This TIFF Tagged Information File Format file retains georeferencing information within the GeoTIFF image file itself Coordinate information is stored in a geographic system latitude longitude TIF GeoTIFF Projected This TIFF Tagged Information File Format file retains georeferencing information within the GeoTIFF image file itself Coordinate information is stored in a projected system e g meters or feet Note This option is not available when Rectify is selected as the projection method TIF TIFF 6 0 Nearly identical to the older TIFF 4 0 but able to include more application specific data along with the image This format will not retain georeferencing information TIF DRG FGD The TIF DRG format creates an FGD metadata information file similar to those included with USGS Digital Raster Graphic maps This file format may be imported into applications that support DRGs Note Because
141. r Pro will automatically fill in for the starting text of your labels You have three choices Text When you first start using Terrain Navigator Pro Default Name is set to Text This means that Terrain Navigator Pro will present each new label as a blank slate for you to type whatever text you wish If you choose Text for your default you can type a heading in the space at right The heading will automatically appear in the first line of your labels This feature is useful for marking multiple instances of the same thing for example Shelter Work site etc Date Time You may choose to automatically start your labels with either Date or Time Since Date and Time serve as headings no additional Heading space is available AutoText AutoText is location data that you may include in your labels AutoText is so called because it will automatically update itself if the label is moved You may choose Coordinates Elevation Grade or Street Address This data refers to the point at the end of a label s tail To add AutoText before any existing text choose Prepend To add the AutoText after existing label text choose Append Border Your label text may be enclosed in a border Select a squared edge rectangle a rounded edge rectangle or a text balloon If you prefer not to use a border at all select none and your label text will appear directly on the map with no background color Font Preview Change Font S
142. rom the toolbar then click on the map location where you d like to place i reported your label Type your text in the space AF erosion provided pe Moving a Label When you re creating or editing a label a series of small black squares appears on the label These serve as handles for sizing and moving the label If the squares aren t visible select the Label tool and click on the label To adjust the size or shape of the label place your cursor over any of the small black squares around the label edge and drag to stretch or shrink the label n To move a label drag the small black square in the center If the central E black square isn t visible click once outside the label If no black squares are visible hold the cursor over the ces xi center of the label until the cursor ee changes shape then click Remember you must use the Label tool in order to move or resize labels Trail crew reported erosion When using a Balloon border you can also move the balloon s tail hold the cursor over the end and press Ctrl Enter for line return move it to a different location Text Text Color Background Color Editing Labels To make any changes to a label right click on the label and choose Edit Pont Preview Text Type the text for your label if you like press Ctrl Enter to create line breaks carriage returns Locked Border Select one of three available borders or choo
143. rops in elevation Elevation Change The difference between the starting point s elevation and the ending point s elevation Min Max Minimum Maximum Elevations The highest and lowest points on the entire line of sight Latitude Longitude Elevation Grade These figures refer to the position of your cursor on the profile image underneath the dotted sight line As you move the cursor over the profile graphic these figures will change Grade refers to the steepness of the terrain at the point you clicked Tools in Line of Sight Window As in the Profile window several tools allow you to manipulate the line of sight graphic see page 39 Applying Height Offsets to Sight Line When you first view a line of sight the starting and ending points of the sight line are attached to the ground The beginning of the sight line is set at the elevation of the point at the start of the distance line route or track Likewise the end of the sight line is set at the elevation of the end of the distance line route track By applying height offsets you can raise either end of the sight line to see what height s are required for clearance over obstacles or terrain Press the Options button and uncheck No Offsets You can then either type new height numbers use the sliding levers or simply drag the start and end points The dotted sight line will move as the offset figures change This shows you what height is required for clearance over the given te
144. rrain 42 Profile Distance line de F Profile Options X Vertical Anis Offsets aa 24 59 M M Automatic Range No Offsets YO AB yy Ground distar 20 000 ft Total distance Start 000f WZ te ee eee ee 1 000 ft Witt mk 275 ft Earth Curvature Show earth curvature in line of sight profile Cancel Help Show Earth Curvature in Line of Sight Profile Over long distances the curvature of the earth affects the line of sight Check Show Earth Curvature in Line of Sight Profile and Terrain Navigator Pro will take this into account when calculating the sight line If you re measuring a long enough distance you will notice that the dotted sight line dips in the middle This is because the landforms in this wndow are portrayed along a flat graph Since the profile graphic itself is not curved to mimic the earth s surface the adjustment is made instead to the sight line What would be a convex curve of the ground is a concave curve of the sight line Original Settings The original Start and End elevations are shown in the Options window for your reference To restore the original settings check No Offsets again 43 Note Height Offsets are Not Retained Please note that height offsets are NOT retained after you close the Line of Sight window You can use the Print button provided in the Line of Sight window to print the graphic showing your offsets Enhanced Digital Elevation Data When you in
145. rst start using Terrain Navigator Pro all your layers are stored in the same Project given the name lt Default gt If you want to create a new Project click Layers gt Change Project Press the New button and assign your new Project a name Any new layers you create will be stored under this Project name To stop adding layers to this Project click Layers gt Change Project again and select a different Project from the list Press Open to open the selected Project Whenever you create new layers they are automatically added to whatever Project is open 4 4 4 You may only work with one Project at a time This is the active Project Any new layers you create are automatically added to the active Project To stop adding layers to a Project you must switch to another Project that is make another Project active Projects may not be combined nor may layers be shared across multiple Projects Projects are saved every time you close Terrain Navigator Pro or switch to another Project Renaming Projects Select a Project from the list and press the Rename button to assign it a new name Deleting Projects To delete a Project click Layers gt Change Project highlight the Project you want to delete and press the Delete button 34 Importing Exporting Projects Projects may be exported from Terrain Navigator Pro and saved in a single file ending in TPA This allows you to share projects with friends and colleagues who u
146. rther troubleshooting tips C You get a screen with text scrolling upward You are successfully connected to your GPS unit The data that you see scrolling by are the NMEA sentences coming from your GPS Note the COM port that you used for this successful test and exit HyperTerminal When asked if you want to disconnect now answer Yes When asked if you want to save session Test answer No Now that you have determined the correct COM port start Terrain Navigator Pro Leave your GPS unit in NMEA mode for a moment In Terrain Navigator Pro s GPS Setup window set Manufacturer to NMEA Generic set Unit to NMEA 0183 2 1 choose the correct COM port and press OK Click GPS Connect You should now be able to set your GPS back to its native mode that is from NMEA to the model specific mode that s specified in the Driver Notes section of Terrain Navigator Pro s GPS Setup window Make sure that all settings in the GPS Setup window match the settings in your GPS unit and click GPS gt Connect again if necessary Everything should now be working properly Can t find HyperTerminal HyperTerminal is a standard Windows application that is included with all modern versions of Windows If it is not installed on your computer open the Windows Control Panel choose Add Remove Programs select the Windows Setup tab click on Communications and press Details Check the checkbox for HyperTerminal and press OK then OK again You may need your Windo
147. s Understand Your GPS Unit s Waypoint Storage Options Before sending markers to your GPS be sure that you know how your GPS unit handles waypoint storage Route names Make sure that you don t already have a route of the same name stored in your GPS for example if you already have a waypoint named H20 in your GPS and you send it another H20 the GPS unit may overwrite the old H2O and replace it with the new one Number of waypoints Find out how many waypoints your GPS unit can store Some GPS units might overwrite existing waypoints in order to accept the new waypoints that you send Driver Notes For tips and cautions for your particular GPS make and model see the Driver Notes section of Terrain Navigator Pro s GPS Setup window Consult your GPS manual You should also thoroughly read your GPS user s manual and familiarize yourself with storage functions of your GPS unit before attempting any data transfers After you send routes to your GPS your marker data will still be retained within Terrain nae Pro To edit or delete markers in Terrain Navigator Pro click Layers E x sharers Send Route Mo x Names Routes COLDER Mt Colder AOO005 Ateb RattAw Raquette River SlngPd Slang Pond As you know you can create routes on the maps in Terrain Navigator Pro and send these routes to your GPS unit First configure and connect your GPS Click GPS gt Send to GPS gt Send Route and Terrain Navigator Pro will
148. s ns sone ee eae 77 Creating ROUTO A eee isin cd Seamer a e OR Saket e a ab aN 17 EQIIAd ROQUES ni ei las 78 EUNGAP AP sa aeicecainden gone smut dana esantaeaunns aeeucetiencea ac Alestetanseasatoe si oene 80 Adding a New AVDOING sai o ad 81 EONO ROE LEGS dois adi 82 Adding a New Roule Led usd a ii rc 83 Creating a Route from a Track Distance Line oocccocnccccnccoccnccnnnnncnnnnnncnnnnonnnnnnncnnnanonnnnnonnncnnnnonaninonnns 83 o a e a a N E E ER 86 TRACK Saron ies 88 POOR S ae E E a eesyaih mere ate aa clea nag kandteabaamnemaiemisaniones 88 EONO Mack ica A A A NA Os 89 APpenalino toa ack ed a omens oat ites a a a a a Mucaninatt 90 Creating a Route Based oma acid dea 91 Track Preferentes asics ee hee eects tel heen le eid o ae 91 PRINTING MAPS ini aaa 93 Praia aldea lia Dalai 93 QUIE nea 96 EXPORTING MAPS NGS BENCHMARK DATA ccccccceeeeeseeeeeeeeeneeeeseneenenenees 97 A gate 97 eA as Fe on EXPO ua ai bi 101 MUI MAD EXDO 6 eee ie ney ee tr Ae ence pene are iaa 101 COPY Map TO CHIDO o 101 SENDING MAPS TO PDA FOR USE IN ESRI ARCPAD cceceeeeeeeeeeeeees 102 A AA A o Ue CO he somata that bre beater cat an Meters ued tes E TE 102 sending the Active Map to PDA ccccccccsscccsececseeceeeeseeecaeesaeeceseeceueesausesaeeesaeeeeseesaueesaeeesaeetesaaes 103 SEN GING Multiple Maps 1o PDA initio a aia 103 IMPORTING EXPORTING DATA IN TEXT FILE FORMAT ccceeeeeeeeees 105 ROUES ce h a er
149. s set to Port A COM Communications port is a connector on the back of your computer where peripheral devices such as a mouse or a GPS unit may be connected Your computer s COM ports are numbered 60 Specify the COM port on your computer where your GPS unit is connected If you aren t sure of the number of the port you re using consult your computer s user manual or use trial and error until you successfully connect Establishing Communication Once all GPS Setup settings are correct you can establish communication with your GPS unit 1 Ensure that the GPS unit is connected snugly to its data cable and that the cable is connected snugly to the COM port specified in GPS Setup 2 Turn the GPS on 3 Click GPS gt Connect Verifying Communication To verify your GPS connection click GPS gt Connect again A check mark will appear next to the Connect option to indicate that communication has been established When GPS communication is established a second status line a gray window border will appear along the bottom of the Terrain Navigator Pro window directly above the Help line The screen might flicker momentarily as the map image is shifted up to make room for the GPS Status Line The GPS Status Line will provide information when you re performing data transfers like sending waypoints to your GPS or receiving a track log from your GPS To keep the Status Line from appearing click File gt Preferences gt Ge
150. s what Terrain Navigator Pro will use for your initial 3 D view 3 D Arrow Controls This setting affects how the 3 D arrow controls respond Choose whatever movement method you find more intuitive Move Viewpoint in Direction of Arrow When this option is checked the arrows represent the direction in which you want to go as though you were at the controls of an airplane or a car For example pressing the Right arrow will move your viewpoint to the right Pressing the In arrow will move you closer in to the map image This is Terrain Navigator Pro s default setting Move Landscape in Direction of Arrow This produces the exact opposite effect The arrows refer to the map image itself rather than your viewpoint So if you press the Right arrow it s as though you are reaching out and spinning the map image to your right Likewise pressing the In arrow is like pushing the map away from you which gives you a broader view of the area Use 3 D Hardware Acceleration lf your computer system provides this option check here to tell Terrain Navigator Pro to take advantage of this feature You may find that you need to update your video drivers before you can take advantage of Hardware Acceleration Hardware Acceleration The speed and performance of 3 D View depends largely on your computer s video card The video card is the component of your computer that controls display performance and speed Video cards are powered by drivers To en
151. se Terrain Navigator Pro or save projects for future reference To export a project click File gt Export gt Active Project The project you re working with will be saved in a file ending in TPA You may then store or share the file as you wish To import a project that has been archived click File gt Import gt Archived Project Layer Information To get information about a specific layer item right click on it and choose Information The resulting window will also provide data about the map containing this layer Printing Layers To include a layer on a printed map check Print Layers in the Print window All layers presently visible on the map image will be included in the printout To print information about specific layers you must print the map that contains the layers In the Print window check Print Layer Information After the map image is printed additional page s will be printed with information about all layers shown See page 93 for more about printing Deleting Layers To delete a specific layer item right click directly on it and choose Delete You can also use a layer s Edit window to delete items of that layer type From the Layers menu select a layer type All items of that type will be listed highlight an individual item and press Delete Deleting a Layer Project If you use Projects to organize your layers see page 34 you can delete certain projects if you wish click Layers gt Projects highlight the
152. se none and your text will appear directly on JK Lancel Help Position Sample i the map image without a colored background Text Color Background Color Select from 16 colors Your choices will be shown in the Preview window Background color is unavailable if no Border is selected Change Font Lets you choose a font specify a font size and add bold italics etc Position Check Locked to ensure that the label will not be moved on the map Unless Locked a label may be moved by clicking and dragging with the Label tool Label AutoText AutoText Options Placement O Prefix Suffix Cancel Help E se D Ci Dynamic Values Mone Coordinates C Street Address Elevation Grade x The AutoText button lets you include location data in the text of your label Press AutoText and choose to include Coordinates Street Address Elevation or Grade The information will be added to your label text To add it before any existing text select Prefix To add the AutoText after existing label text select Suffix Auto Tet sample i Aa 1004 21 N 071 26 AutoText Up 46 dates Itself T l LX al yA gt 7 L a BA it J Lh pk i A A E pial 1 1 CANT h S i y n a uf il i k pa IRE 1 i q A a Fol g hal y L I i pr a F L LL 3 q L z ot E Y y IN ti ge a AS ee ee A IA i E r pr The value you se
153. so be retained 107 Markers Exporting Markers You can export selected markers and save them in text file format elsewhere on your computer system This is handy for sharing your routes with other users of Maptech software for keeping backup copies of your data and for using your data in other applications Fermcroft Camp Shehadi To export markers click File gt Export gt Markers Lamp Rich Terrain Navigator Pro will display a list of all your Blueberry Ledges markers Highlight the marker s you want to A strim export You can select as many as you want use your Control and Shift keys to highlight multiple markers When you have made your selections press Save The next window will prompt you to name the file that contains your exported markers and specify the directory location where you want to save it Save Cancel Help You will also need to choose a format MXF Maptech s proprietary format for marker import export MXF files may be shared among users of Maptech products A single MXF file will contain all the routes you have selected for this export See Marker Text File Format MXF on page 109 for complete details SHP ESRI s Shapefile format for use in a variety of GIS products supporting this format Exporting data in this format will result in multiple files For details see ESRI Shapefile Format page 113 GEN UnGenerate file format for use with ESRI ARC INFO GPX An XML based
154. solution elevation data To take advantage of the latest data available reinstall this map region insert the CD and click File gt Install Map CD and insert your Geographic Data Enhancement CD when prompted 16 Updating Maps Photos via the Internet Terrain Navigator Pro lets you check for updated topo maps and aerial photos and download any new versions available To check Maptech s servers click File gt Map and Aerial Photo Updates via Web If your computer isn t already connected to the Internet you will prompted to establish an Internet connection You have two options for checking for updated maps photos Update all maps photos on hard drive Terrain Navigator Pro will check for available updates for all the topo maps and aerial photos that you have copied onto your hard drive Any new versions detected will be downloaded Update only maps contained in current CD region Terrain Navigator Pro will only compare dates for the topographic map titles from the CD region you are presently working with This option can save time if you re presently only interested in a particular area of topo coverage IMPORTANT NOTE ON AERIAL PHOTO QUALITY Maptech obtains updated aerial photo coverage from the USGS The USGS has recently produced color aerial coverage for some areas Unfortunately some of these digital color images are damaged lines or blotches may obscure portions of the image In cases where the damage Is minimal Maptech has
155. stall any map CD for use with Terrain Navigator Pro you are given the choice of installing elevation data Elevation data is necessary for profiles line of sight calculations and 3 D view mode Elevation data also provides approximate spot elevation for your cursor position This approximate elevation is displayed in the top right corner of the Terrain Navigator Pro window and it may also be included in GeoTips Remember these spot elevations are approximate A visual check of the surrounding contour lines is the best way to determine actual elevation at any given point Your map CD purchase may have included one or more Enhanced Digital Elevation Data CDs The elevation data contained on these CDs is of a higher resolution than the elevation data that you can opt to include during your initial software installation This enhanced data makes for more accurate profiles greater 3 D detail and closer spot elevation approximations If you do not have the Enhanced Digital Elevation Data CD title mentioned in the message on your screen you may purchase this data from Maptech call 888 839 5551 for details Note Enhanced Elevation Data requires several hundred MB of free space on your hard drive 44 Labels Annotating Maps Labels A Gf l g Use Labels to add your own notations Pequawket Outdoors Club and comments directly to the map fof A image Irail Improvement Project Click Tools gt Label or select the Label tool f
156. sure that 3 D display performance is maximized you should maintain updated video drivers Choose 3 D Accelerator Info from the Help menu to get details on your video card make and model and the status of its drivers About Video Drivers There are two types of drivers Software drivers All video cards have software drivers Provided by Microsoft these drivers generally work well but some applications may still experience slow display Hardware drivers Some video cards have hardware drivers in addition to software drivers Hardware drivers are designed to provide faster display A video card s ability to use hardware drivers is called hardware acceleration 30 Terrain Navigator Pro s 3 D View mode is pre set to take advantage of hardware acceleration if possible click File gt Preferences gt 3 D and you ll see that Use 3 D Hardware Acceleration When Available is checked This means that if your video card has working hardware drivers it will use them Many computers don t have hardware acceleration but since this checkbox is checked Terrain Navigator Pro looks for hardware acceleration anyway just in case Getting Information about Your Video Card and its Drivers For information on your video card s settings and capabilities choose 3 D Accelerator Info from the Help menu The resulting window gives details on your video card s software and or hardware drivers and it also tells you which driver your video card is currently
157. t support DirectX can take advantage of this direct communication resulting in faster display Computer games often use DirectX If you try to install your new driver and you receive a message that DirectX is required a download is available at Microsoft s website http www microsoft com directx If you are unable to find suitable drivers at your video card manufacturer s website try the website of your computer manufacturer as well Computer manufacturers often distribute the latest drivers for components of their computer systems Once Your Video Card Drivers Have Been Updated Once you have downloaded and installed the latest available drivers for your video card restart your computer and restart Terrain Navigator Pro Click File gt Preferences gt 3 D and make sure that Hardware Acceleration is checked If the speed of your 3 D display is not improved there are a few more things you can try For some video cards hardware acceleration is only available under certain system configurations Try changing your display Colors setting Right click on the desktop and choose Properties then select the Settings tab Under Colors specify a different setting and see if your 3 D view is improved Also in the Properties Settings window press the Advanced button and select the Performance tab Slide the Hardware Acceleration lever to Full Try displaying a smaller area of terrain click File gt Preferences gt 3 D and under
158. t datum was used in establishing those coordinates What do I need to do about it This depends When you re transferring coordinates between Terrain Navigator Pro and your GPS all you need to do is make sure your GPS datum is correctly specified in Terrain Navigator Pro s GPS Setup window Once Terrain Navigator Pro knows what datum your GPS is using it can convert datum as necessary to ensure that nothing gets lost in translation With some GPS models Terrain Navigator Pro can detect the GPS datum setting automatically In such cases the Datum setting in Terrain Navigator Pro s GPS Setup window will be grayed out This is because Terrain Navigator Pro already knows what datum your GPS is set to When you re transferring coordinates via any other method you need to be conscious of datum Such instances include Typing lat lon coordinates by hand in Terrain Navigator Pro You need to know A the datum of those coordinates and B the datum that Terrain Navigator Pro is using The two datums must match Click File gt Preferences gt General to find out what datum Terrain Navigator Pro is using and to change the datum if necessary Exporting layer data in text file format The coordinates in these text files are given in WGS84 datum World Geodetic System of 1984 Keep this in mind if you plan to use the data in another application Reading a lat lon off your computer screen and typing it by hand into your GPS Without the
159. t you specify here 92 Printing Maps Print Printer System Printer hp deskjet 960c a m EN T Copies hb SIZE Scale y 1 20000 Liuality eo dpi y weight Medium Y ct Print Options gt f Summary Margins Caption August a e Layers Medium E Layer Information Rulers with Gridlinez i North Arow M with Lines W 1 Ticks 4 Scale Bar OF Cancel Setup Help E To print some or all of the map you re viewing click File gt Print or press the Print button When used in Seamless View the Print command will allow you to include multiple maps in a printout The example image above shows the Print window in Seamless View In Single Map View the Print window looks much the same but shows a single map complete with collar Ep Blue Outline Shows Area to be Printed On the left side of the Print window is an overview of the map that you re viewing If you have two map windows open the Print dialog shows the map from the active window A blue box outlines the area to be printed This blue outline is centered on the same point that your screen was centered on when you gave the Print command So whatever was at the center of your screen will also be at the center of your printout unless you move the blue outline You can move the blue outline by dragging it with your cursor Copies The number of copies pages to be printed Each page will be the sa
160. te River ME Colden Dicey s Mill Trail Flume Trail Big Rock Cave ME Mexico Save Cancel Help routes and choose an export format Available Formats x You can export selected routes and save them in text file format elsewhere on your computer system This is handy for sharing your routes with other users of Maptech software for keeping backup copies of your data and for using your data in other applications To export routes click File gt Export gt Routes Terrain Navigator Pro will display a list of all your routes Highlight the route s you want to export You can select as many as you want use your Control and Shift keys to highlight multiple routes When you have made your selections press Save The next window will prompt you to name the file s containing your exported routes specify the directory location where you want to save your RXF Maptech s proprietary file format for route import export RXF files may be shared among users of Maptech products A single RXF file will contain all the routes you have selected for this export See Route Text File Format RXF for complete details page 106 SHP ESRI s Shapefile format for use in a variety of GIS products supporting this format Exporting data in this format will result in multiple files For details see ESRI Shapefile Format page 113 GEN UnGenerate file format for use with ESRI ARC INFO GPX An XML based format used by so
161. tered Terrain Navigator Pro customer you have one year of unlimited access to aerial photo coverage for all areas where you have topo map coverage Most are presented at 1 12 000 scale but scales as large as 1 3 600 are available in some areas Your layers measurements annotations etc will appear on the aerial photos just as they appear on the 13 topographic maps and you can continue to add layers while you re working with aerial photos Registration and Internet Connection Required The aerial photos are stored online at servers operated by Maptech Access to aerial photos requires an Internet connection from the computer where Terrain Navigator Pro is installed Registered Terrain Navigator Pro customers have unlimited access You may view aerial photos over the Internet or copy them to your hard drive as you wish To register Registration is fast and simple You can register online anytime or register by telephone during business hours Click Help gt Register for detailed instructions Your initial Terrain Navigator Pro purchase entitles you to one year of access to aerial photos for the region s you own After the first year you may extend your subscription if you wish call 888 839 5551 Viewing Aerial Photos 1 You ll need to be connected to the Internet If you aren t already connected Terrain Navigator Pro will prompt you to connect via your usual connection procedure 2a Open a topo map of the area yo
162. thout requiring that you switch to the CD region that originally contained that map The example below shows the Map Selector overview of New Hampshire with several maps shared from the Coastal Maine CD region to the east Open Map New Hampshire ee xi Map Hare GREELEY BROOK Ae Code 45071 C2 TF 024 Show at Startup Open jpe Include Related Non Map Data Check here and in addition to the map image itself Terrain Navigator Pro will also copy elevation NGS National Geodetic Survey data Geographic Data Enhancement CD is Best Source for Non Map Data Updated NGS data and higher resolution elevation data is available for most map regions This data is distributed on CD labeled Geographic Data Enhancement CD You are prompted to insert the Geographic Data Enhancement CD during the Setup process for each map region you install If you have already installed enhanced geographic data from your Geographic Data Enhancement CD the latest elevation NGS data available will already be present on your hard drive In this case Terrain Navigator Pro won t copy anything besides the map image even if Copy Non Map Data is checked If you bypassed the Geographic Data Enhancement step during installation you can check Copy Non Map Data to receive elevation NGS data now when you copy maps to your hard drive However the data on your Geographic Data Enhancement CD may be more current NGS data and of a higher re
163. tionary and your position icon moves across it When your icon reaches the edge of the screen the map updates itself re centering on your new location Each time you reach the edge of the screen the map re centers on you Suspend Screen Saver Depending on your computer s screen saver settings your screen saver might be activated during tracking since you re probably not using the keyboard much Check this box to prevent your screen saver from appearing and interfering with the map display during live tracking Otherwise you can just press any key to clear the screen saver when you want to view the map image 67 GPS Position Averaging GPS Position Averaging a a x Average Latitude 040 39 55 012 Longitude 107 36 33 66 Elapsed Time 00 00 24 Mumber of Samples 14 stop Create Mark Terrain Navigator Pro is equipped with a position averaging feature for maximum precision in marking locations A stationary GPS unit will report slightly different coordinates as satellite signals fluctuate If you require extreme accuracy for marking a particular location turn Position Averaging on click GPS gt Utilities gt Position Averaging Next leave your connected GPS in that location for a time in order to allow it to acquire satellite signals and make several position reports To start collecting those position reports press the button labeled Start Number of Samples tells you how many position reports T
164. to your hard drive for ease of access Click File gt Copy Maps to Hard Drive This opens a state overview much like the Map Selector Highlight the maps you want to copy then press OK The maps you chose will be copied to your hard drive Use the Shift key on your keyboard to highlight multiple maps Press Clear All to clear your map list and start over Press Select All to copy all the maps on the CD Copying Aerial Photos To copy aerial photos set Map Type to 1 12 000 or to a larger scale if available This will display the photo grid where you can select which photos to copy Deleting Maps Photos from Your Hard Drive Maps photos that are already present on your hard drive are shaded gray To delete a map or photo from your hard drive click on the gray grid square The square will turn transparent i e it won t be shaded or highlighted in any way Press OK to start the copying deleting process You can copy maps to and delete maps from your hard drive in a single step Depending on how much data you re copying this process may take several minutes When the process is complete a message will appear on the screen noting how many maps were copied deleted Example Copied 8 maps to the hard drive Deleted 3 maps from the hard drive Maps from Bordering CDs lf you copy maps from bordering CD regions the maps will appear in the Map Selector window for the bordering CD This gives you access to the maps wi
165. toText is so called because it automatically updates itself wnenever necessary For example if you attach AutoT ext Coordinates to a marker and then you move the marker the AutoText figure will change accordingly Placement 74 The AutoT ext will be included on the same line as the marker s name Decide whether you want the AutoText to appear before the marker name as a Prefix or after the name Suffix Dynamic Values Choose Coordinates Street Address Elevation or Grade The information will appear on the map on the same line as the marker name To remove AutoText choose None Setting Defaults for AutoText You can set preferred AutoText for Terrain Navigator Pro to use every time you create a new marker To specify your preferred settings click File gt Preferences gt Markers Marker Preferences Click File gt Preferences gt Markers to adjust the default settings that Terrain Navigator Pro will use for any new markers you create Categor Markers i Default Name ESEA The Default Name is what Terrain Navigator Pro will automatically fill in Default Mame Testi E Mrk for the starting text of your marker Append y Coordinates y names You have four choices di lalo All Text Lets you assign a standard name prefix in the space at right on pane ung When you first start using Terrain Color C Change Font Reset Navigator Pro the Default Name is set to Text with Mrk to be used as t
166. top PC and press Browse to specify the folder where you want to store the map Press Next Save to Desktop PC The next window offers you the option of including additional data along with the map Browse image Check any additional data that you would like and press Next The map along with any Lancel additional data you selected will be saved in the location that you specified Include Additional Data xj Note For information on ArcPad visit www esri com For details on using Terrain Navigator Pro maps in ArcPad see the Downloads page at www maptech com for a downloadable guide in Adobe PDF format MW NGS Data National Geodetic Survey TT EVH Data Elevation Data W MTH Data Enhanced Elevation Data aat You may also send multiple maps at once Cancel Sending Multiple Maps to PDA To select multiple maps to send to your PDA click PDA gt Send to PDA gt Send Maps The process is the same as sending just the active map described above except that after you have specified a save to location and selected any additional data required you may then select the map titles you want to send 103 Select Maps to Send New Hampshire x Map Type 1 24 000 25 000 bl Map Name MT DARTMOUTH MT KINEO MT MOOSILAUKE MT OSCEOLA MT Paw TUCRAW AY MT PISGAH MT TRIPrRSMID MT WASHINGTON Reference Code 44071 C3 TM 024 4401
167. ty NONE by your GPS and has configured itself to match these settings In this case you do not need to concern yourself with the port Stop Bits fi a settings If your GPS does allow for adjustments make sure that the E Hel ari _ Help values that you set here in the Port Settings dialog match the settings in your GPS unit Once you have configured the Port Settings dialog to match the values set in your GPS the Port Settings dialog will retain these settings for future use and you won t have to set them again Baud rate refers to the number of characters transferred in a given period of time Data Bits Stop Bits and Parity also affect the way that data is divided in the communication stream If you are not sure what settings to use consult your GPS manual GPS Troubleshooting If you have followed all instructions in Terrain Navigator Pro s GPS Setup window including any instructions in the window s Driver Notes section and you still can t establish communication with your GPS here are a few things to try GPS Software Drivers Remember to visit your GPS manufacturer s website for updated drivers for your particular GPS unit Manufacturers maintain and update software drivers for use with various GPS units and these drivers are available via Internet download It is a good idea to keep current with the latest software drivers available Check for Port Conflicts Sometimes a computer system may reserve a p
168. u wish to view then from the scale dropdown on the toolbar select a scale ending in A or 2b In the Map Selector window set Map Scale to 1 12 000 or to a larger scale if available then select a square from the grid on the state overview To reach the Map Selector click File gt Open Map Switching Between Topo Maps and Photos Use the scale dropdown on Terrain Navigator Pro s menu bar to switch Mezaooom 11 EE EL between maps and photos A T after the scale indicates a topo map an g A indicates an aerial photo 112 000 A w 124 000 T pa Finding Out When an Aerial Photo Was Taken Click File gt Map Information or select the Information Tool from a the toolbar then click anywhere on an aerial photo to get technical details including the date of the flyover when the photograph was taken See page 116 for more about the Map Information window Copying Aerial Photos to Your Hard Drive Just like topo maps aerial photos may be copied to your hard drive by clicking File gt Copy Maps to Hard Drive 14 Copying Maps to Your Hard Drive Copy Maps to Hard Drive Coastal Maine z xj r q if ik Be Reference Code 34067 DE TF 024 4406707 TF 4024 44067 D08 TF 024 44067 E2 TF 024 44067 E3 TF 024 44067 E4 TF 0124 44067 E5 TF 024 44067 E6 TF 124 Select All Clear Al 4 ef gt e Copy Non Map Data i re at P Terrain Navigator Pro allows you to copy maps
169. ulations do NOT account for the curvature of the earth Use care when calculating specific line of sight measurements over very long distances Total Distance The distance of the line of sight without regard to elevation changes as though you were flying an airplane from the starting point to the ending point via the shortest path possible For example two hills with a valley between them might really be two miles apart in total distance even though traveling between them on the ground might be a journey of two and a half miles ground distance IMPORTANT This is not to be confused with the total length of the route track or distance line itself This figure refers to the straight line distance between the starting point and the ending point Ground Distance The ground distance between the starting and ending points taking elevation changes into consideration This is the distance that you would travel if you could walk in a perfectly straight path over the intervening terrain between the starting point and the ending point Climbing This is the sum of all the ascending portions of the line of sight s path Every upward slope is counted towards this figure even if there are downward portions that counteract these temporary elevation gains Descending This is the sum of all the descending portions of this line of sight Every downward slope is counted towards this figure even if there are upward portions that counteract these temporary d
170. ull page graphic can be very taxing on a laser printer s memory high quality prints may exceed the printer s capabilities If this occurs try printing at a low DPI setting or use Quick Print to print a less than full page map Weight Set the ink density or weight to Light Medium or Dark Depending on the printer and paper changing the weight may result in better looking prints Some experimentation with your printer will determine the most effective weight setting Summary When Summary is checked the bottom portion of the page will include the USGS map name this was printed from the date of printing the scale being printed 1 inch n feet the coordinates of the center of the map and a caption if one has been typed Margins Press Margins to assign top bottom left and right margins to your printout The margins determine the amount of unprinted space between the edges of the map area and the edges of the paper Margins are measured in inches Type the values you want for each edge press Clear to reset all four margins to zero Set Margins Inches Bottom 0 50 Inches Inches Right 0 50 Inches Clear Lancel Help Note With most printers the printed page cannot be filled all the way to the paper s edge This is due to the printer s internal 94 mechanics This is why even if you set all four margins to zero the resulting printout may still have a thin frame of unprinted area around the map im
171. utomatically be locked upon creation You can still unlock them individually by right clicking any waypoint and choosing Unlock Route Line Color Sixteen colors are available Style Choose from a variety of dotted dashed or solid lines You may also opt to use a symbol The symbol will be placed at intervals along route lines Width Width of the route line Highlight If you like you may apply highlighting to your route lines Choose from nine colors Font Waypoint Symbol Choose a symbol a font style size and a color for each Loop Interior When a route is looped the enclosure that it forms will be filled with the pattern and color that you specify here 87 Tracks Tracks The Track Tool lets you create lines or tracks on the map Tracks are saved for future reference and may be included on printed maps Creating a Track FA To create a track by hand select the Track Tool button on the toolbar Click where you want to start the track and continue to click to add track segments You can also drag the cursor holding the left mouse button down to create a curved line To back up and erase the last portion that you drew press the Backspace button or the Delete button on your keyboard You might have to press the key several times or hold it down to see results To temporarily switch to the Drag tool hold down the Control key 4 When you have finished creating your track and want to save it on the map
172. ved Press Open Terrain Navigator Pro imports your tracks and displays a message telling you how many tracks were imported The tracks will automatically appear in their proper locations on the map in their proper color If you have coordinate data that you would like to transfer to Terrain Navigator Pro for display as a track you can create TXF files in Windows Notepad Wordpad or a word processing program Terrain Navigator Pro handles internal data conversions in WGS84 datum and then presents the coordinate information in whatever datum you have selected in the Preferences dialog When you export track data from Terrain Navigator Pro the coordinate data in the resulting TXF file is given in WGS84 datum Therefore when importing track data into Terrain Navigator Pro be sure to use WGS84 datum when creating your TXF text file Using a datum other than WGS84 will affect the accuracy of the coordinate locations in Terrain Navigator Pro The degree to which the coordinates accuracy is affected will vary depending on the datum you used when creating your TXF file and the coordinate system that you have specified in Terrain Navigator Pro s General Preferences For example NAD83 datum is nearly identical to WGS84 111 datum so creating a TXF file using NAD83 datum would probably not affect the coordinates accuracy as much as using another datum might If datum change causes a shift in coordinates location the shift will be more pronoun
173. would have traveled to get there If you re doing realtime GPS Tracking you may opt to use the Speed from GPS and or Bearing from GPS The end point will move as you speed up or slow down Range Bearing Line Information To get the specifics about a range bearing line right click on the line and choose Information The resulting window will tell you the coordinates of the Start and End points the length of the line and the bearing from Start to End Back bearing bearing from End to Start is also provided 58 Range Bearing Line Preferences Preferences Category RangeBearing Lines Range SET BY DISTANCE Distance OOD000 Miles ba 7 SET EY TIME Time fi 000000 Hours i if traveling at this speed E 000000 KMPH a Bearing 45 000000 Degrees Display Options Line Color MS Line Style Line width Show Name M Show Range and Bearing Click File gt Preferences gt Range Bearing Lines to adjust the default settings that Terrain Navigator Pro will use for any new range bearing lines you create You can always adjust individual lines as you wish the specifications below are simply the initial settings that Terrain Navigator Pro will use for all new range bearing lines that you create Range Set by Distance Specify how long your range bearing lines should be Set by Time Use this option to create range bearing lines based on projected progress at
174. ws 64 CD to complete the installation HyperTerminal not displaying any data NMEA sentences If you cannot get HyperTerminal to display data after following the above procedure trying each COM port there is something wrong with either your COM port your data cable or your GPS unit Since the source of the problem is outside Terrain Navigator Pro you should contact your computer or GPS manufacturer for further troubleshooting tips Realtime GPS Tracking Designed for use in a moving vehicle GPS Tracking lets you monitor your progress on the map If you like you can record your progress and save it on the map as a track In order to perform GPS tracking you must have a connected compatible GPS with a satellite position fix Once GPS communication is established click GPS gt GPS Tracking gt Start Tracking As soon as Terrain Navigator Pro receives a position signal from your GPS Terrain Navigator Pro will open the map containing your location and mark your position with an icon on the map This icon will move across the map as you move across the terrain GPS Position Icon Click GPS gt GPS Tracking gt Tracking Preferences to choose from several symbols car boat arrow etc to represent your GPS position The symbol points in the direction in which you re moving so you can see at a glance which direction you re headed Whenever you stop moving the symbol becomes a circle Record Track Log Recording Your Progress S
175. y the directory location where you want to save it You will also be asked to choose a format TXF Maptech s proprietary format for track import export TXF files may be shared among users of Maptech products A single TXF file will contain all the tracks you have selected for this export See Track Text File Format TXF for complete details page 111 110 SHP ESRI s Shapefile format for use in a variety of GIS products supporting this format Exporting data in this format will result in multiple files For details see ESRI Shapefile Format page 113 GEN UnGenerate file format for use with ESRI ARC INFO GPX An XML based format used by some websites for coordinate sharing Your tracks will be retained in Terrain Navigator Pro Exporting tracks does not delete them from Terrain Navigator Pro It simply creates another version of your track data in a text file format You can share your TXF data with other Maptech software users To import tracks into Terrain Navigator Pro just click File gt Import gt Tracks and browse to the location of the TXF file The imported tracks will be added to your track list and will appear on the maps Tracks exported from Terrain Navigator Pro may be imported into various Maptech programs including Terrain Navigator Pro recreational version Terrain Navigator Pro for GIS CAD Offshore Navigator marine navigation software Chart Navigator marine software for trip planning an
176. y Terrain Navigator Pro are not able to receive tracks from Terrain Navigator Pro This is simply because these GPS units are not capable of storing track data in memory After you send tracks to your GPS your track data will still be retained within Terrain Navigator Pro To edit or delete tracks in Terrain Navigator Pro click Layers gt Tracks Receiving Data from GPS Waypoints Receive Waypoints E ae x If you have waypoints stored in your GPS and would like to see those waypoint locations on the maps in Terrain Navigator Pro you can transfer them to your computer Connect your GPS unit and click GPS gt Receive from GPS gt Receive Waypoints Hames Comments ICEBERG LK ISLAND LAKE LEANTO MAILBOX MIDLAKE MOOSE MOSSY ROCK MT WILLE NEAR MOOSE Terrain Navigator Pro will communicate with your GPS and present a list of all the waypoints currently stored in the GPS unit s memory This can take a few seconds possibly slightly longer if you have a great number of stored waypoints From the list provided select the waypoints that you would like to bring into Terrain Navigator Pro Use the Shift and Control keys to make multiple selections El When you have made your selections press OK A small message will appear on the screen telling you the Lancel Help number of waypoints received The waypoints that you selected will Receive Routes e x appear on the m
177. you to one year of access to USGS aerial photos for your map region Page 13 Copy Maps to Hard Drive Terrain Navigator Pro 6 0 will read maps from CD ROM or directly from your hard drive Aerial photos may be copied to your hard drive too Page 15 New Layer Tools Use Labels to add your own captions to map images Page 45 GeoPins let you link external files to map locations Page 48 Use Range Rings to gauge distance in all directions from a particular point Page 51 Range Bearing Lines let you measure distance and bearing between any two points Page 56 Use Projects to classify manage and store all your layers Page 34 Other Enhancements ESRI ArcGIS ArcPad Extension New PDA menu allows transfer of maps to handheld PocketPC device for use in ESRI s ArcPad mobile GIS software Page 102 Profile Adjust Vertical Axis Customize the vertical minimum maximum against which a profile is shown Page 39 Line of Sight Apply Height Offsets Raise either end of the sight line to achieve clearance and anticipate obstacles Page 42 GeoTips Customizable Tooltips GeoTips provide a handy data readout when you hold the cursor over a specific layer or map location Page 20 AutoText Self Updating Location Info AutoText can show coordinates elevation grade or street address Attach AutoText to marker names waypoint names or labels If the layer is moved the AutoText will update accordingly Page 46 Search for Street A

Download Pdf Manuals

Related Search

Maptech maptech maptech charts maptech software maptech brigg maptech chart books maptech tools maptechnica maptech waterproof charts maptech chartkit maptech infra service maptech packaging inc maptech information solutions inc maptech embassy cruising guides maptech pearl ms maptech packaging hilton head sc

Related Contents

Mode d`emploi de cette série  User Manual  SocketA AMD Athlon/Duron Processor  Dolby Laboratories DVD- 2OO3 User's Manual  Dell M17x Tutorial : Free Download, Borrow, and Streaming : Internet Archive    BETRIEBSANLEITUNG  (Programme for Organising Students` Choices )  Evite les contaminations virales ou bactériennes  Samsung ES17 User's Manual  

Copyright © All rights reserved. Failed to retrieve file