the Sena SR10 User Manual
Contents
1. FCC Compli ance Statement This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions This device may not cause harmful interference and This device must accept any interference received including interference that This equipment may cause undesired operation has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These lim against harmful its are designed to provide reasonable protection nterference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there in a particular in interference to rad turning the equ 22 s no guarantee that interference will not occur stallation If this equipment does cause harmful io or television reception which can be determined by ipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC RF Exposur2. LOSS OF ANTICIPATED PROFITS OR BENEFITS RESULTING FROM OR ARISING OUT OF OR IN CONNECTION WITH THE USE OF FURNISHING OF EQUIPMENT PARTS OR SERVICES HEREUNDER OR THE PERFORMANCE USE OR INABILITY TO USE THE SAME EVEN IF SENA OR ITS DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES IN NO EVENT WILL SENA OR ITS DEALERS 31 TOTAL LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT Return for Full Refund IF YOU ARE UNWILLING TO ACCEPT AND AGREE TO THE ABOVE CONDITIONS YOU MAY RETURN THIS DEVICE TO SENA FOR A FULL REFUND PROVIDED THAT YOU DO SO NO LATER THAN 14 BUSINESS DAYS FOLLOWING THE PURCHASE OF THE DEVICE AND SUBJECT TO THE WRAPPING BEING INTACT WHEN DOING SO PLEASE REFER TO THIS SECTION BY NOT RETURNING THE DEVICE FOR REFUND WITHIN THE PERIOD PROVIDED YOU ARE EXPLICITLY IN AGREEMENTWITH THE ABOVE AND RENOUNCE ALL RIGHTS TO FUTURE CLAIMS AND DEMANDS AGAINST SENA AS DEFINED ABOVE 32 WARNING SENA informs that using this device in public traffic may not be authorized by the law Please check your local law and use this device only out of public traffic such as private properties or closed circuits SENA denies any liability should you choose not to respect this warning 33 ee Fe E lic pis Bee TV SENA V1 0 0 www senabluetooth com
3. SR10 to factory default settings press and hold the pairing button for 12 seconds until the LED shows solid red 2 Within 5 seconds press the pairing button again to confirm reset The SR10 will be restored to factory settings and switched off automatically after the blue LED flashes several times 3 If you don t press the pairing button within 5 seconds the reset attempt is canceled and the SR10 returns to standby mode Fault Reset If the SR10 is not working properly or is in a faulty status for any reason you may reset by pushing the small reset button at the top of the SR10 main unit By using a paper clip or a pencil tip lightly press and hold the reset button for 1 second The SR10 will be switched off Turn the SR10 back on to use it However this will not restore the SR10 to factory default settings QUICK REFERENCE Buttons Button Description Duration LED Pairing button Power on On Solid blue PTT button Power off 1 sec Solid red Pairing Bluetooth headset 5 sec Blue amp red button pairing alternatively flashing Mobile phone 8 sec Red flashing pairing Factory reset 12 sec Solid red Factory reset Tapping Blue flashing confirm PTT Button Two way radio Solid blue transmitting audio LED Status LED Description Solid Blue No headset connected Slow Blue Flashing Headset connected and standby Slow Red Flashing Mobile phone connected and standby
4. suggestions will help you protect your warranty coverage 1 Do not use or store the device in dusty dirty areas Its moving parts and electronic components can be damaged 2 Do not store the device in hot areas High temperatures can shorten the life of electronic devices damage batteries and wrap or melt certain plastics 3 Do not store the device in cold areas When the device returns to its normal temperature moisture can form inside the device and damage electronic circuit boards 4 Do not attempt to open the SR10 5 Do not drop or knock the device Rough handling can break internal circuit boards and fine mechanics 6 Do not use harsh chemicals cleaning solvents or strong detergents to clean the device 7 Do not paint the device Paint can clog the moving parts and prevent proper operation 20 DISPOSAL The crossed out wheel bin symbol on the product literature or packaging reminds you that all electrical and electronic products batteries and accumulators must be taken to separate collection at the end of a their working life This requirement applies to the European Union and other locations where separate collection systems are available To prevent possible harm to the environment or human health from uncontrolled waste disposal please do not dispose of these products as unsorted municipal waste but hand it in at an official collection point for recycling 21 CERTIFICATION AND SAFETY APPROVALS
5. Blue Double Flashing Headset audio channel is opened Red Double Flashing Bluetooth phone call is in progress Rapid Blue Flashing Probing paired headset Rapid Red Flashing Low battery LED Status While Charging LED Description Solid Red Charging Solid Blue Fully charged 18 BATTERY INFORMATION The SR10 has an internal non removable rechargeable battery Do not attempt to remove the battery from the device as you may damage the device The battery can be charged and discharged hundreds of times but it will eventually wear out Recharge the battery only with SENA approved chargers designated for this device Use of an unapproved charger may present a risk of fire explosion leakage or other hazard Always try to keep the battery between 15 C and 25 C 59 F and 77 F Extreme temperatures reduce the capacity and lifetime of the battery A device with a hot or cold battery may not work temporarily Battery performance is particularly limited in temperatures well below freezing Do not dispose of batteries in a fire as they may explode Batteries may also explode if damaged Never use any charger that is damaged Operating times are estimates only and depend on the devices used together features used battery age and condition temperatures to which battery is exposed and many other factors MAINTENANCE AND CARE The SR10 should be treated with care and the following
6. Bluetooth Users Guide Saba Bluetooth Two way Radio Adapter SENA www senabluetooth com CONTENTS INTRODUCTION eene kek s a i a a EE ENEE EE ENER 4 PACKAGE CONTENTS ENEE 7 INSTALLING THE GE is kinis ia ai A iai a as 9 POWERING ON OFF AND CHARGING tieisiai aaa 10 e Powering On ctrtsecteet eee t saaa siai aaa 10 Hano UT TTT 10 e Charging 4 teiks aaa a saaa aa 11 e Low Battery Warning 4544 t eee 11 PAIRING THE SR10 WITH BLUETOOTH DEVICES 12 Bluetooth Headset Pairing 44 tt earn ai 12 Bluetooth Mobile Phone Pairing 44 4 t kn tees testes sees eee eees 12 USING THE SR10 4444 kaka aaa kaka aaa aaa aaa aaa 13 e Using Two way Baden 13 e Installing Wired PTT Button 4654 ek anas 13 Pons andi Cabieces ss Es ks si a i i i a i i is 14 e Using Mobile Phone eta sana aaa saaa a 15 e Audio Channel Open and Close 44 tees aka saaa 15 e Reset to Factory Default Settings DEER 17 si Fault ReSek 555 gg de del i ii i ik BENENNEN QUICK REFERENCE asss 18 BATTERY INFORMATION Lauka kaka kaka kaka kaka aaa 19 MAINTENANCE AND CARE eeeceeeceeeeeeeeeteeeeeeeneees 20 DISPOSAL seg NEE ao siste pessoa soda ai a ia e i 21 CERTIFICATION AND SAFETY APPROVALS en 22 e FCC Compliance Statement 444444 22 e FCC RF Exposure Statement eeeeeeeeeeeeeeeeeeeeeeeeeeneees 23 FGC Gantian Las is ias sia a ii Ee a ai oi ne pues 23 e CE Declaration of Conformity ee
7. ED light is visible while charging It takes about 3 5 hours to be completely charged When it is completely charged the LED turns to blue Low Battery Warning When the battery is running low the red LED light will flash PAIRING THE SR10 WITH BLUETOOTH DEVICES Bluetooth Headset Pairing 1 Turn on the Bluetooth Headset and enter pairing mode following your Bluetooth Headset manual 2 Turn on the SR10 and press and hold the pairing button for 5 seconds until the LED flashes red and blue alternatively 3 When the pairing is successful the blue LED flashes slowly Bluetooth Mobile Phone Pairing 1 Turn on the SR10 and press and hold the pairing button for 8 seconds until the red LED is rapidly flashing Search for Bluetooth devices on your mobile phone The SR10 will be listed on your mobile phone 2 Enter 0000 for the PIN Some mobile phone may not ask for the PIN 3 The SR10 will be paired as Headset This profile is normally recommended for most mobile phones 4 When pairing is done the red LED flashes slowly USING THE SR10 Using Two way Radios 1 When SR10 is turned on and connected with a hand held two way radio the audio from the two way radio will be directly sent to your Bluetooth Headset You can use the Bluetooth headset as a hands free device for the two way radio 2 To talk using the two way radio through SR10 press and hold the PTT button or wired PTT button extension until you finish ta
8. d mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by SENA is under license Other trademarks and trade names are those of their respective owners The SR10 is compliant with and adopts the Bluetooth Specification 2 1 EDR and has successfully passed all interoperability tests that are specified in the Bluetooth specification However interoperability between the device and other Bluetooth enabled products is not guaranteed 25 WAIVER AND GENERAL RELEASE By using the SR10 you waive any legal rights including the right to sue Please read the following carefully before using the device If you do not accept all terms of this agreement you should immediately return the product for a full refund By using the SR10 you agree to be bound to this agreement and forfeit the right to sue Using a communication device while riding a motorcycle scooter moped ATV quad bike or any other vehicle or equipment whether on land water or air jointly referred to as Vehicle requires your complete and undivided attention SENA Technologies Inc including its Officers Directors Affiliates Parent Company Representatives Agents Contractors Sponsors Employees Suppliers and Resellers jointly referred to as the Company or SENA strongly advises you to take all necessary precautions and remain alert to the traffic weather and road conditions if you choose to use the SR10 including all derivative m
9. deral state or national laws or regulations and that any use of the Device is entirely at your sole risk and responsibility 1 You your heirs legal representatives successors or assigns hereb y voluntarily and forever release discharge indemnify and hold har mless SENA from any and all litigation claims debts demands actions and liability which may arise directly or indirectly from using the Device for any distress pain suffering discomfort loss injury death damages to or in respect to any person or property however caused WHETHER ARISING FROM THE NEGLIGENCE OR OTHERWISE and which may hereafter accrue to you on some future date as a result of said use to the fullest extent permitted by law 2 You fully understand and assume the risks in using the Device including risk of negligent acts or omissions by others 3 You confirm that you are physically capable to use the Device and that you have no medical conditions or needs that may infringe upon your abilities to do so in a safe manner You confirm that you are at least eighteen 18 years of age and that you have been advised of the risks associated with the use of the Device You 28 further confirm that you will not consume any alcohol that may affect your alertness or any mind altering substance and will not carry use or consume these substances before or during the use of the Device 4 You fully acknowledge our warnings and understand that a risks and danger
10. e Statement The antenna s used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co located or operating in conjunction with any other antenna or transmitter FCC Caution Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user s authority to operate the equipment 23 CE Declaration of Conformity This product is CE marked according to the provisions of the R amp TTE Directive 99 5 EC Hereby SENA declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC For further information please consult http www senabluetooth com Please note that this product uses radio frequency bands not harmonized within EU Within the EU this product is intended to be used in Austria Belgium Denmark Finland France Germany Greece Ireland Italy Luxembourg The Netherlands Portugal Spain Sweden United Kingdom and within EFTA in Iceland Norway and Switzerland Industry Canada Statement This device complies with Industry Canada license exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device 24 Bluetooth License The Bluetooth wor
11. ects to the Bluetooth headset For information on mobile phones and cable compatibility please visit www senabluetooth com Audio Channel Open and Close The SR10 has to have an audio channel to the Bluetooth headset to redirect audio from the connected devices two way radio mobile phone GPS or radar detector As soon as an incoming audio signal from the connected devices is detected by the SR10 it 15 immediately opens an audio channel to the Bluetooth headset and consequently users hear a certain sound The triggering signal to open an audio channel is for example a sound of the two way radio incoming signal GPS voice instruction radar detector alarm or mobile phone ringtone The audio channel is established by Bluetooth Hands Free Profile HFP When incoming audio no longer exists the SR10 closes the audio channel and releases the HFP connection in just a few seconds Users can open and close the audio channel manually To open or close an audio channel manually double tap the PTT button on the SR10 or the wired PTT button extension It works in toggle mode When the incoming audio input level from the connected devices is not high enough to trigger the SR10 to open an audio channel or to maintain existing audio channel users can open an audio channel manually In this case users have to close the audio channel and release the HFP connection manually Reset to Factory Default Settings 1 To restore the
12. eeeeeeeeeeeeeeeeeeeeeeeeeeees 24 e Industry Canada Statement 2 4 aaa k aaa kaka aaa aaa aaa 24 e Bluetooth License ccccrcrrerercoro rose score cerco so rosca ras sas 25 WAIVER AND GENERAL RELEASE Lekas 26 e Two Year Limited Warranty seseeeeeeeseeeeeeeeeeeeseeeeeeees 30 Limitation of Liability seeeeeeeeeeeeee aaa aaa aaa aaa 31 e Return for Full Refund seee eee e cece cece ip ieina 32 WARNING G sie si oaksssiarsoa aaa EE 33 INTRODUCTION Thank you for choosing the SENA SR10 The SR10 is a Class 1 Bluetooth two way radio adapter and mobile phone hands free gateway based on Bluetooth 2 1 EDR technology Users can connect various two way radios in the market with the SR10 and connect wirelessly to a variety of Bluetooth communication headsets At the same time as a Bluetooth mobile phone hands free gateway the SR10 lets users connect Bluetooth headsets to mobile phones as well With the SR10 users can use a hand held two way radio and a Bluetooth mobile phone simultaneously with a single Bluetooth headset The SR10 has two AUX input ports for wired connection of non Bluetooth devices such as GPS radar detector laser detector or non Bluetooth mobile phone Along with the SR10 users can talk by phone or by two way radio at the same time listen to the radar detector alarm or GPS voice guidance The SR10 can cover such a variety of applications including motorcycle CB communications outdoor sports activities even
13. lking Installing Wired PTT Button 1 Place the PTT button on the motorcycle handlebar grip or any other place where you can easily reach it 2 Wind up the rubber band on the handlebar grip and hang it on the hook Ports and Cables The SR10 has one main port and two AUX ports for wired connection with other devices Below is a list of compatible cables and devices Main Mini DIN two way radio cable e AUX1 3 5mm 3 pole audio jack cable for GPS radar detectors or laser detector e AUX2 3 5mm 3 pole audio jack cable for GPS radar detectors or laser detector or 3 5mm 4 pole mobile phone cables for mobile phones For information on two way radio cables please visit www senabluetooth com Not included in the package Must be purchased separately Included in the package 14 e Using Mobile Phone 1 For Bluetooth Wireless Connection When the SR10 is paired with a Bluetooth headset and a Bluetooth mobile phone the Bluetooth headset will provide Hands Free Profile for your mobile phone The SR10 redirects mobile phone calls and two way radio communications to the Bluetooth headset simultaneously so that a Bluetooth headset could be used for both the mobile phone and hand held two way radio 2 For Wired Connection Users can connect a mobile phone to the AUX2 port by wire in order to use Bluetooth handsfree In this case the SR10 combines audio from the main port and the AUX2 port together and redir
14. odels irrespective of its commercial name or branding the Device and stop your Vehicle on the roadside prior to initiating or receiving calls Any 26 publications advertisements announcements or similar notes that refer to using the Device while riding a Vehicle are sol intended to address its technical capabilities and should not ely be misconstrued as if encouraging users to operate the Device while actively involved in traffic By way of purchasing this Device and not returning it for a full refund see below you are irrevocably releasing indemnifying from any liability loss claim and expense including attorneys fees and holding SENA harmless for any bodily injuries harm or death as well as losses or damages in goods to any Vehic es including your own or to any property or asset that belong to you or to third parties any of which may result from using the Devi under any circumstances or conditions and irrespective of jurisdicti ce on SENA will not be responsible for any physical damages irrespective of reasons conditions or circumstances including malfunction of the Device and all risks associated with operating it rest sol ing ely and entirely with the user of this Device irrespective of whet ner the Device is used by the original purchaser or any third party 27 SENA hereby notifies you that using this Device may also be in contravention to local fe
15. r replacement at SENAs discretion of defective or non conforming Product and SENA shall not be responsible for the failure of the Product to perform specified functions or any other non conformance caused by or attributable to a any misapplication or misuse of the Product b failure of Customer to adhere to any of SENAS specifications or instructions c neglect of abuse of or accident to the Product or d any associated or complementary equipment or software not furnished by SENA Limited warranty service may be obtained by delivering the Product to SENA or to the international distributor it was purchased through and providing proof of purchase or receipt date Customer agrees to insure the Product or assume the risk of loss or damage in transit to prepay 30 shipping charges to SENA and to use the original shipping container or equivalent Limitation of Liability EXCEPT AS EXPRESSLY PROVIDED HEREIN SENA MAKES NO WARRANTY OF ANY KIND EXPRESSED OR IMPLIED WITH RESPECT TO ANY EQUIPMENT PARTS OR SERVICES PROVIDED PURSUANT TO THIS AGREEMENT INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE NEITHER SENA NOR ITS DEALER SHALL BE LIABLE FOR ANY OTHER DAMAGES INCLUDING BUT NOT LIMITED TO DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES WHETHER IN AN ACTION IN CONTRACT OR TORT INCLUDING NEGLIGENCE AND STRICT LIABILITY SUCH AS BUT NOT LIMITED TO
16. rmware Upgrade Port AUX2 Mobile Phone GPS Navigation Radar Laser Detector Mini DIN port for two way radio devices AUXI GPS Navigation or Radar Laser Detector 2 5mm jack for wired PTT Button DC Power Charger USB Power Cable G e 3 5mm Audio Jack Cable N Es Wired PTT Button Extension E e Belt Clip Kit 3 Handlebar Mounting Kit 4 CR INSTALLING THE SR10 Installing on the Handle Bar 1 Place the rubber on the back of the main unit 2 Put the joint pad on top of the rubber and tighten the screw 3 Place the main unit on the handle bar wind the rubber band and hang it on the hook Placing on the Belt Pocket 1 Place the belt clip on the back of the main unit and tighten the screw 2 Place the main unit on the belt with belt clip POWERING ON OFF AND CHARGING To power on and off the adapter you don t need to press and hold any button for several seconds Just short press the Pairing Button and the PTT Button simultaneously and you will get quick on and off convenience Powering On Press and hold the pairing and the PTT button at the same time for about 1 second to turn the power on When the power is on the blue LED light turns on Powering Off Press pairing button and PTT button at the same time for about 1 second to turn the power off The Red LED light turns on for about 3 seconds The SR10 is now powered off Charging The red L
17. s exist in using the Device while in traffic including but not limited to injury or illness strains fractures partial and or total paralysis death or other ailments that could cause serious disability b these risks and dangers may be caused by the negligence of the manufacturers or its agents or any third party involved in designing or manufacturing the Device c these risks and dangers may arise from foreseeable or unforeseeable causes You hereby assume all risks and dangers and all responsibility for any losses and or damages whether caused in whole or in part by the negligence or other conduct of others including the Company 5 You confirm that you have read this release of liability and fully understand its terms and that you have given up substantial rights by not returning the Device for a full refund see refund option below 29 Two Year Limited Warranty Sena Technologies Inc SENA warrants that this product Product shall conform to and perform in accordance with published technical specifications and the accompanying written materials and shall be free of defects in materials and workmanship for a period of two 2 year from the date of purchase by the first consumer purchaser of the Product The limited warranty extends only to the original consumer purchaser of the Product and is not assignable or transferable to any subsequent purchaser end user This warranty is limited to the repair and o
18. t security hunting motorsports pit crew and other forms of intercom communications Please read this user s guide carefully before using the SR10 Also refer to www senabluetooth com for the latest version of the user s guide and additional information related to SENA Bluetooth products Features Bluetooth hands free adapter for two way radios Bluetooth hands free gateway for Bluetooth mobile phones e Connect 1 two way radio and 1 mobile phone simultaneously e Compatible with standard stereo or mono Bluetooth headsets Two AUX inputs for wired connection of non Bluetooth devices GPS radar detector laser detector or non Bluetooth mobile phone Motorcycle handlebar mount and belt clip Optional 12V bike powered kit with on off control by ignition switch e Water resistant for use in inclement weather e Firmware upgradeable Two year limited warranty Technical Specifications Bluetooth v2 1 EDR Class1 Supporting profiles Headset Profile Hand Free Profile HFP Operation time 12 hours Standby time 10 days Batter charging time 3 5 hours Lithium polymer battery Dimensions 108 mm x 52 mm x 29 mm 4 3 in x 2 0 in x 1 1 in e Weight 81g 2 86 oz CE FCC TELEC IC PACKAGE CONTENTS Main Unit Pairing Button Bluetooth Headset Pairing Mode Mobile Phone Pairing Mode PTT Button Two way Radio Activation Audio channel forced open DC Power Charging amp Fi
Download Pdf Manuals
Related Search