SCENA COMPACT DISCHARGE LAMP 35-70
Contents
1. 224 mm 172 mm 5 SCENA COMPACT SCENA COMPACT PC DISCHARGE LAMP 35 70 W 151 mm g t C O 198 mm 154 mm SCENA COMPACT FR DISCHARGE LAMP 35 70 W 151 mm 198 mm 154 mm 6 SCENA COMPACT 2 IMPORTANT SAFETY INFORMATION Fire prevention Never locate the fixture on2. A hot lamp may explode so always wait for at least 10 minutes prior to attempting to replace the lamp Always wear suitable hand protection when handling the lamp Level of protection against the penetration of solid and liquid objects The projector is classified as an ordinary appliance and its protection level against the penetration of solid and liquid objects is IP 20 The projector contains electric and electronic components which should under no circumstances come into contact with oil water or any other liquid The proper unit functioning would be compromised should this occur MAINS CONNECTION SCENA COMPACT with discharge lamp operates at 230 VOLT 50 60 Hz Prior to connecting the unit to your mains supply ensure that the model in your possession correctly matches the mains supply available For connection purposes ensure that your plug is capable of supporting 1 5 amps at 230V Protection The use of a thermal magnetic circuit breaker is recommended for each unit A good earth connection is essential for the correct operation of the projector 7 SCENA COMPACT MOUNTING THE LAMP 1 Loose the screw located on the top side of the unit Loose these 2 screws 2 Open the top cover and insert the lamp The lamp used is manufactured from quartz glass and should be handled with care Always adhere to the instructions supplied in the lamp s packaging Never touch the glass directly but use the tissue provided in the lam
3. SENA G DIMI YAY GI DTS The Lighting Company GB Made in Italy ser Manual Rel 1 1 2 SCENA COMPACT Le informazioni contenute in questo documento sono state attentamente redatte e controllate Tuttavia non assunta alcuna responsabilita per eventuali inesattezze Tutti i diritti sono riservati e questo documento non puo essere copiato fotocopiato riprodotto per intero o in parte senza previo consenso scritto della D T S DTS si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche funzionali o di design a ciascun proprio prodotto D T S non assume alcuna responsabilit sull uso o sull applicazione dei prodotti o dei circuiti descritti The information contained in this publication has been carefully prepared and checked However no responsibility will be taken for any errors All rights are reserved and this document cannot be copied photocopied or reproduced in part or completely without prior written consent from D T S D T S reserves the right to make any aesthetic functional or design modifications to any of its products without prior notice D T S assumes no responsibility for the use or application of the products or circuits described herein Les informations contenues dans le pr sent manuel ont t r dig es et contr l es avec le plus grand soin Nous d clinons toutefois toute responsabilit en cas d ventuelles inexactitudes Tous droits r serv s Ce document ne peut
4. tre copi photocopi ou reproduit dans sa totalit ou partiellement sans le consentement pr alable de D T S D T S se r serve le droit d apporter toutes modifications et am liorations esth tiques fonctionnelles ou de design sans pr avis a chacun de ses produits D T S d cline toute responsabilit sur l utilisation ou sur l application des produits ou des circuits d crits Las informaciones contenidas en este documento han sido cuidadosamenteredactadas y controladas Con todo no se asume ninguna responsabilidad por eventuales inexactitudes Todos los derechos han sido reservados y este documento no puede ser copiado fotocopiado o reproducido total o parcialmente sin previa autorizaci nescrita de D T S D T S se reserva el derecho a aportar sin previo aviso cambios y modificaciones de car cter est tico funcional o de dise o a cada producto suyo D T S no se asume responsabilidad de ning n tipo sobre la utilizaci n o sobre la aplicaci n de los productos o de los circuitos descritos 3 SCENA COMPACT 1 TECHNICAL FEATURES SCENA COMPACT is a new range of small and lightweight projectors fitted with a discharge lamp ideal for use in theatres showrooms shops museums churches trade fairs conferences etc SCENA COMPACT models offer an elegant and compact design and a choice of different finishes for easy installation even in the most refined settings SCENA COMPACT is available with PC or Fresnel lenses SCEN
5. D T S D T S reserves the right to make any aesthetic functional or design modifications to any of its products without prior notice DTS assumes no responsibility for the use or application of the products or circuits described herein MADE IN ITALY C The Lighting Company D T S Illuminazione s r l Via Fagnano Selve 10 12 14 47843 Misano Adriatico RN Italy Tel 39 0541 611131 Fax 39 0541 611111 info dts lighting it www dts lighting it
6. any flammable surface Minimum distance from flammable materials 10 CM Minimum distance from the closest illuminable surface 30 CM Connect the projector to mains power via a thermal magnetic circuit breaker Prevention of electric shock High voltage is present inside the unit Unplug the unit prior to performing any function which involves touching the inside including lamp replacement A good earth connection is essential for proper functioning of the projector Never connect the unit without proper earth connection The fixture should be located in places with a good air ventilation Protection against ultraviolet radiation Never turn on the lamp if the front lenses is damaged His respective shielding function will only operate efficiently if it is in perfect working order Never look directly the lamp when it is on Safety The projector should always be installed with bolts clamps and other tools that are capable of Supporting the weight of the unit Always use a second safety cable to sustain the weight of the unit in case of the failure of the main fixing point The external surface of the unit at various points may exceed 70 C Never handle the unit until at least 10 minutes have elapsed since the lamp was turned off Always replace the lamp if any physical damage is evident Never install the fixture in an enclosed area lacking sufficient air flow The ambient temperature should not exceed 40 C
7. A COMPACT offers a series of high level operating features neatly fitted into an extremely small space SCENA COMPACT is available in 3 models 150W 70W or 35W with built in ballast SCENA COMPACT PC 35W Cod 03 TS007 A PC lens 90mm e 35W discharge lamp e Black colour SCENA COMPACT FR 35W 03 TS007 F Fresnel lens 112mm e 35W discharge lamp e Black colour SCENA COMPACT PC 70W Cod 03 TS006 A PC lens 90mm e 70W discharge lamp e Black colour SCENA COMPACT FR 70W Cod 03 TS006 F Fresnel lens 112mm e 70W discharge lamp e Black colour SCENA COMPACT PC 150W Cod 03 TS005 A PC lens 90mm e 150W discharge lamp e Black colour SCENA COMPACT FR 150W Cod 03 T5005 F Fresnel lens 112mm e 150W discharge lamp e Black colour Construction Extremely compact and lightweight Steel housing with aluminium edge profiles Front box for filter frame and barn door with locking system Internal ventilation labyrinth Removable cover for easy access to lamp Reversible yoke for using the projector in any position Finishings Black White RAL 9003 Grey RAL 9006 or other colours on demand Safety Frontal protection grille removable Heat insulated knobs and handles Optical unit PC lens 90mm or Fresnel lens 112mm Focal adjustment from 20 to 40 with precision movement on a double track Spherical reflector in polished and treated 99 9 aluminium Lampholders G12 for discharge lamps 150W 70W 35W Power supply Bui
8. lt in ballast 230V 50 60Hz discharge lamp models 230V 50 60 Hz halogen lamp model 4 SCENA COMPACT 1 TECHNICAL FEATURES ACCESSORIES e Barn door black finishing Cod 03 TA206 e C Clamp G30 black max load 5Kg cod 05214020 e C Clamp G30 chrome max load 5Kg cod 0521A020 20 e Safety wire 3mm x 60 cm ring spring catch max load 60Kg cod 05214010 e CDM T150 832 MCD 150W discharge lamp Cod 0505S003 1 e CDM SA T 150 942 discharge lamp Cod 0505S003 e HSD 150W discharge lamp Cod 0505S003 2 e Gel filters SCENA COMPACT PC DISCHARGE LAMP 150W 151 mm n a E i e b Oy E y 3 E 256 mm wa 296 mm SCENA COMPACT FR DISCHARGE LAMP 150W 151 mm
9. p s packaging The G12 lampbase is symmetrical DO NOT USE UNDUE FORCE ON THE GLASS In case of difficulty re read the instructions and repeat the procedure Close the cover and replace the screw No lamp allignment needed BEAM ANGLE ADJUSTMENT Focal adjustment from 20 to 40 with precision movement on a double track gt Se BEAM ANGLE ADJUSTMENT KNOB PERIODIC CLEANING Even a fine layer of dust can reduce the luminous output substantially Regularly clean all lenses and the reflector using a soft cotton cloth dampened with a specialist lens cleaning solution PERIODIC CONTROLS The lamp should be replaced if there is any visible damage or deformation due to heat This will help to avoid the danger of the lamp exploding Periodically check all mechanical parts Periodically check the lubrication of all components particularly the parts subject to high temperatures If necessary lubricate with suitable lubricant available from your D T S distributor Check all electrical components for correct earthing and proper connection of all connectors refastening if necessary Attention Disconnect mains power prior to removing the projector housing The information contained in this publication has been carefully prepared and checked However no responsibility will be taken for any errors All rights are reserved and this document cannot be copied photocopied or reproduced in part or completely without prior written consent from
Download Pdf Manuals
Related Search