Optogenetics-LED User Manual
Contents
1. health or even death When wiring the device first disconnect it from the power source and then turn OFF the main switch on the back panel Prizmatix products are NOT authorized for use as components in life support devices or systems The Optogenetics LED must not be operated in explosion endangered environments Any maintenance shall be performed ONLY by a Prizmatix authorized technician When using Optogenetics LED intense light can be emitted by the system during operation Precautions must be taken to prevent looking directly at the light with unprotected eyes or the shining of light onto bare skin Do not look directly into the light or through the optical system during operation of the device this can be harmful to the eyes even for short periods due to the high intensity of the light If it is necessary to view the LED s beam use protective glasses to avoid damage by the intense light 3 Page Optogenetics LED User Manual Set up of the Device Prizmatix Remove the device from packaging and inspect the device for loose components or any signs of damage Notify Prizmatix if the device appears damaged in any way do not install a damaged device Package Contents List Optogenetics LED Power Adaptor Mains Power Cord item Description S Quantity Optogenetics LED High Power LED light source Universal power adaptor Cord to connect the power adaptor to mains voltage gt Power Adaptor Mains Power Cord2. General Specifications Digital modulation input Connector for TTL input Digital modulation frequency Rise Fall time 10 90 Input Voltage Max Input current Power Adaptor Input Dimensions Fan noise 4 Page Optically isolated TTL BNC standard TTL levels DC 30000 Hz lt 2us 12V 6 54 85 264 VAC 47 63Hz 1 5A 197 x 174 x 80mm L x W x H 28 4 dBA Optogenetics LED User Manual Prizmatix System overview Power Button 10 Turn Potentiometer Fiber Coupler Output Port Optogenetics LED front panel Power TTL Input Adapter Connector BNC Connector and Int Ext Selection Switch Analog Input Connector BNC and Int Ext Selection Switch Optogenetics LED back panel 5 Page Optogenetics LED User Manual Prizmatix Initial Set up of Optogenetics LED 1 Set Power Switch on back panel of the unit to OFF position and connect power adaptor to the back of the unit and into wall mains socket 2 Set both the TTL and Ain Analog Input switches on back panel to Int position 3 Press the green button on front panel to turn the LED on the internal green light of the button is turned on too The LED light shall be seen at the optical connector on front panel 4 LED power can be adjusted using the 10 turn potentiometer on front panel 5 Press the green button once again the LED is tuned off as well as the button light Turn unit off by Power S
3. Prizmatix Optogenetics LED User Manual Version 3 Main Office European Sales Office North America Sales Office Phone 972 27 2500097 Phone 44 0 77 9172 9592 Phone 1 248 436 8085 Fax 972 27 2500096 Fax 44 0 20 7681 2977 Fax 1 248 281 5236 sales prizmatix com sales europe prizmatix com sales uSa prizmatix com P O B 244 Givat Shmuel 5410102 Israel Prizmatix Contents CONTENTS sita Optogenetics LED System Description occocccoccoccnoccononccnanonconoccnronoonanonconocnaronconoccnrononos Healthand SM tia Set Up ofthe DEVICE tc A A A E Pee ASC OCU SS secant a e E General SDCCITICATIONS ai iaa SV SUCIMOVERV IEW narrando MitialSetsUp OF Optosenetics PED iaa usaninaeeteeve Example of Set Up for Optogenetics Experiments ccccccssecccsececeescceeeseceeeecesseeeeees 2 Page Optogenetics LED User Manual Prizmatix Optogenetics LED System Description The Prizmatix Optogenetics LED module is specially designed to provide high power Light to activate opsins in optogenetics experiments with freely moving mammals This LED source provides powerful light pulses triggered by external TTL input Health and Safety Before applying power to the power adaptor of the system ensure that the protective conductor of the three conductor mains power cord is correctly connected to the protective earth contact of the socket outlet Improper grounding can cause electric shock and damage to
4. witch on back panel before disconnecting from power supply 6 For TTL input connect BNC cable to TTL input connector on back of unit To enable TTL control change the position of the TTL Int Ext switch to Ext position 7 For Analog Input connect BNC cable to Ain input connector on back of unit To enable Analog Input control change the position of the Ain Int Ext switch to Ext position Attention Do not cover back panel of unit ensure that air can circulate freely Example of Set Up for Optogenetics Experiments Optogenetics LED Pulser A Fiber Patch Cord 2 Rotary Joint _ 3 Fiber Patch Cord if Single Dual 2 Cannula 4 6 Page Optogenetics LED User Manual
Download Pdf Manuals
Related Search