Quick start guide PDF
Contents
1. low battery 10 Blue LED blinking rapid indicate that glasses are switching off due to low power pir Oth EYEWEAR PIVOTHEAD COM e Setup the Video Recording Resolution Hold the Front Shutter B1 down for 4 seconds LED light s blinks three times Resolution has been changed See below the resolutions and light codes 720 60fps Blue light blinks three times 720p 30fps Red light blinks three times 1080p30fps Default Red and Blue light blinks three times together e To setup the Video recording Focus Hold Back Pivot Switch down for 4 seconds LED light s blinks three times Focus setting has been changed See below the focus settings and light codes Auto Focus AF Red light blinks three times Fixed Focus FF Blue light blinks three times Continuous Auto Focus CAF Red amp Blue light blinks three times together Remarks You cannot manually change to Macro Focus MF You must be in Manual mode to change into this setting e Computer Application The computer application and its help allows you to change all the Pivothead settings It is pretty intuitive and can be downloaded from our website at www pivothead com download Remark Power ON your recorder before to connect it to the computer If powered OFF when connected the recorder will just allow the charging mode e Recorder Reset To reset the Pivothead Recorder just press the power button continuously for more than 10 seconds e Detailed User M2. VIDEO RECORDING EYEWEAR PIVOTHEAD COM Pivothead High Definition Hand Free Video Recorder Eyewear Quick Start Guide version 0 4 Camera Lens SHUTTER Button VIDEO SHUTTER Button PHOTO LED Recording Light Red LED Charging Light Green LED Power Light Blue Microphone POWER Button USB Port Heat Sink Ne Zr mmMmooNw gt e To power ON OFF the PIVOTHEAD HDHF recorder Press shortly and release the power button G The blue LED will light on indicating that the device is ON Pressing the power button G again will switch OFF the recorder and the blue LED light e START STOP Video Recording Press shortly and release the Front Shutter Button B1 The recorder will then start recording The red LED C will flash while recording continues Press the button B1 again to stop recording The red LED C will stop flashing confirming recording has been stopped Remark the Recorder will stop recording after 30 min Press the button again to continue recording e Taking Photos Short Press lt 2s and release the Back Shutter Button B2 The recorder s red LED light C will flash quickly indicating focus then one slow red flash indicating that the picture is taken e Other LED Light Meanings when on the go not connected to charger computer Red Blue LED blinking indicate that memory is full don t forget to delete the memory after downloading videos and pictures Blue LED blinking slowly indicates
3. anual and FAQ You can download support documents user manual FAQ etc from our website at www pivothead com download DISCLAIMER Cape Evolution Ltd the producer of the Pivothead products does not promote endorse or intend for its products to be used in high risk careless or dangerous activities and is not responsible for any injuries or property damage arising from any user activities Cape Evolution Ltd Will not under any circumstances be responsible for injuries or property damages resulting from any misuse illegal use or unintended use of its products Cape Evolution is not responsible for any illegal action taken while recording or editing video or still images captured with our products The Pivothead products are intended to be used to capture images and recordings in strict compliance with all applicable federal state and local laws and regulations It is the user s responsibility to comply with such laws and regulations
Download Pdf Manuals
Related Search