20150921 ~ FORBO-EUROCOL-NL ~ 500-eurosafe-multi
Contents
1. eurocol m 500 eurocol com 500 EUROSAFE MULTI Multi purpose floor covering adhesive with a high initial grab Product Typification Basis Superior acrylic dispersion Colour Beige Consistency Thick liquid Multi purpose application Non flammable Easy and safe to apply High initial adhesion strength and final bond strength Favourable spreading capacity Roller castor chair resistant Performances Specific weight 1 56 kg l Flammability Non flammable Consumption Spreader B1 325 425 g m Spreader A2 300 350 g m Application For installing PVC and cushion vinyl flooring synthetic backed carpet hessian backed carpet PVC backed carpet needlefelt linoleum corkment Working Process Storage Store cool and free from frost Tools Eurocol spreader no 850 B1 when installing carpet needlefelt linoleum and corkment Eurocol spreader no 852 A2 when installing carpet with a PVC back and PVC and cushion vinyl flooring Open time 15 30 minuten Latency 0 10 minutes Drying 24 hours time Shelf Life Approx 12 months in unopened packaging The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances subfloor compositions and layer thickness Substrate e 500 Eurosafe Multi is suitable for any type of subfloor that has a good tensile and compression strength The2. subfloor should also be even clean permanently dry and free from grease and dirt according to the requirements of BS 8203 or DIN 18 365 e Only use vapour pervious floor coverings on impervious subfloors When installing cushion vinyls or a carpet with a closed back on fully impervious subfloors apply a 2 mm levelling compound layer In advance always seek our technical data sheets In doubt about the application ask for technical advice User manual Working conditions Required surrounding temperature 18 23 C Temperature for material and subfloor min 15 max 20 C Relative humidity 40 80 Directions for use e Apply the adhesive with the recommended adhesive spreader Eurocol spreader no 850 B1 for installing carpet needlefelt linoleum and corkment Eurocol spreader no 852 A2 for installing PVC and cushion vinyl flooring and carpet with a PVC back e On absorbent subfloors apply the floor covering within 10 minutes into the wet adhesive On low absorbent subfloors keep a waiting time of 10 30 minutes depending on porosity of the subfloor temperature and relative humidity e When installing PVC and cushion vinyl flooring and carpet with a PVC back the subfloor should be moisture absorbent and apply the floor covering into the wet adhesive Roll the floor covering carefully Sheet ends possible bight marks and longitudinal joints are to be pressed firmly e On low absorbent subfloors in c
3. ase of impervious back qualities and or when circumstances are less ideal rolling and pressing should be repeated after approx 15 minutes depending on temperature and relative humidity e Remove fresh adhesive spots immediately with water Underfloor heating systems 500 Eurosafe Multi can be applied on underfloor heating systems The startprotocol of the floorheating needs to be completly executed in accordance with the directives of the supplier Turn off the heater 24 hours before application Do not heat again until at least 24 hours after installation in steps of maimun 5 C water temperature per day Quality and guarantee Environment and health Hazard Class None Safety and environment Safety data sheets of Forbo Eurocol products according to EEG guideline 91 155 MSDS Available on request Articles Article Definition Packaging EAN code 500 Eurosafe Multi 15 kg bucket 8 710345 515009 the strong connection
Download Pdf Manuals
Related Search