i.Terminal® mobile
Contents
1. 26 Fig 15 Adjust BVD dialog sii eee ee 28 Fig 16 Adjusting the auxiliary frame for the Tame 28 Fig 17 Adjusting the centration point position eee eee 29 Fig 18 Detecting the lens shape 30 Fig 19 Auto y dialog toi 30 Fig 20 Select the lens type the frame and activate the autocorrect feature Auto Correction eee 31 Fig 21 Dropdown lists Lens type or Frame type 32 Fig 22 Selection of shape and size of the raw glasS 33 Fig 23 Centration data and frame data 34 EN 20 070 72971 Terminal mobile 54 Fig 24 Fig 25 Fig 26 Fig 27 Fig 28 Fig 29 Illustrations Centration module an overview of the centration and MANSO ia 35 Com mobile Main menu e 36 Settings menu setting option Centration 37 Settings for Terminal mobile Centration oo 38 Setting Option Features eee 39 Sizes and designations regarding lenses and frames 47 EN 20 070 72971 Terminal mobile Index 55 Index A A A O A A 46 AUTO CO C OM xtc e a A a 31 32 48 AOV oieee Enn E E N EE E E nr er tree 30 51 B BACK sai Ota NCO AAA lie PO EOI tig craters 28 A O cece ete ese ate eens 27 C CIII a A nd Seto 17 nR Te Ee ad aaa 26 34 47 52 COMMISSIONING puna ida 10 E aricceceated cocoa seaueeaues A A bea nsenies 14 Correction of head TOA MOM e ad 48 D FG HIG A alec een oes EOE eae 9 DOD ANGE arenie2. Terminal9 mobile Software application Instructions for use together with an iPad Instructions for use together with an iPad i Terminal mobile EN 20 070 7297 3 31 2015 O 2015 Carl Zeiss Vision All rights reserved in the event of granting of patents or registration as a utility patent All names of companies and products mentioned in this User Manual may be a trademark or registered trademarks Reference to external products is for information only and shall be deemed to be neither approval nor recommendation Carl Zeiss Vision accepts no liability for the performance or use of such products iPad is a registered trademark of Apple Inc Other brand names software and hardware names used in this User Manual are generally subject to trademark or patent protection Naming products serves information purposes only and does not constitute a trademark infringement This User Manual is protected by copyright Unless expressly authorized in writing dissemination reproduction of this document or other commercial exploitation and communication of its contents or parts of it are not permitted Persons in contravention of this copyright may be liable to pay compensation for damages Specifications due to technical developments are subject to change This manual is not subject to the revision service Please contact the manufacturer or authorized dealer for the status of the latest edition EN 20 070 72971 Termin
3. Position the red measuring mark on the front side of the outer rim of the frame Measuring mounting lens angle Measuring mark positioned Fig 13 Measuring mounting lens angle e Touch to continue see section Determining the centration data on page 26 EN 20 070 72971 i Terminal mobile 26 Operation Determining the centration data Determination of the centration point position After change over to centration data acquisition mode the photo taken is opened see Fig 14 Head rotation 2 6 Panto 9 6 Fig 14 Start screen in centration data acquisition mode e Check that the markers of the calibration tool have been detected correctly Three front markers detected correctly EN 20 070 72971 i Terminal mobile Operation S 27 Use only plausible and complete centration data and the data derived from these It may be necessary to repeat image capture Check on a regular basis that the black and white measuring markers of the calibration tool are still focused and clearly visible Do not try to retrace them using a felt tip pen as this might impair their functionality Depending on the intensity of use regular replacement at intervals of 6 to 24 months may be necessary to ensure safe and smooth operation If the functionality of the calibration tool is no longer ensured we recommend ordering a replacement calibration tool from the Carl Zeiss Vision GmbH distributor in your area immediately
4. is installed This takes a few minutes Subsequently the three icons 1 Com mobile Profiler mobile and Terminal 2 appear on the touchscreen of the iPad and can be used to start the application in question L ZEISS Liam mobie 6 terminal 2 Fig 1 1 Com mobile Profiler mobile and i Terminal 2 icons on the iPad e Once installation is complete close the Safari Browser and switch the Com mobile Box ON again EN 20 070 72971 i Terminal mobile 12 Commissioning Starting Terminal mobile e Touch the 1 Com mobile icon on the Pad to start mnan Com mobile O The start screen appears with the main menu see ZEISS Fig 2 itom mobile Com mobile icon Pad 17 51 Carl Zeiss Vision zens Infobox 0 1 Customer tile Fig 2 1 Com mobile main menu e Touch the Customer tile 1 Fig 2 in the main menu The Customer ry menu appears see Fig 3 EN 20 070 72971 i Terminal mobile Commissioning 13 DEMO VERSION 104 Customer Ove rview Sort by last name Sort by last name Sort by marked Sort by active Byler Cruz eC 24 09 1987 Clifton Tony 05 04 1989 Harris Alice 02 05 1964 Johnson Brenda 14 01 1999 Jones Smith 11 04 1993 Kastner Angelica 28 09 1985 Fig 3 Customer menu e Select the customer for acquisition of the centration data by touching his her name in the Overview The Customer module customer data of active customer appears
5. target This behavior is typical of previously under corrected progressive lens wearers In such a case it is advisable to convert the measured pantoscopic angle which is often very small or even negative to an empirical normal value A general conversion of y values to the default value of 9 is not recommended in our view EN 20 070 72971 i Terminal mobile 52 Glossary Calculation of centration data for bifocal and multifocal lenses drop angle i Terminal mobile offers a special feature for the centration of bifocal and multifocal lenses the drop angle 8 This angle defines the amount by which the patient has to lower his her eyes from the zero visual direction to reach the segment top We recommend centration for bifocal and multifocal lenses based on the drop angle If desired the drop angle 8 can be adjusted using the up down arrow keys Only the drop angle makes allowance for the patient s specific back vertex distance Experience has shown that glasses with bifocal lenses with a value of approx 14 generally provide a high level of visual comfort Naturally modifications of this value may be required to meet the patient s specific needs The drop angle is particularly important when the wearer needs new glasses The vertical measurements of the near portions in the old glasses may only be used for the new glasses if the back vertex distance and pantoscopic angle are unchanged If this is not the case reta
6. that measurements in a standing position tend to produce smaller vertical variations The vertical correction function is also available see section Vertical correction auto y overlead EN 20 070 72971 Terminal mobile Glossary 51 Vertical correction auto y The auto y function makes it possible to measure the current pantoscopic angle and then to convert the vertical centration data to a different freely selectable pantoscopic angle taking into account the specific situation Note for progressive lenses the recommended pantoscopic angle is 7 11 An angle of 9 is specified as the ideal angle Using the auto y function reduces the variation of the vertical centration values y values without the need for additional measurements When should the auto y function be used For a number of individuals significantly greater variations in posture were observed during multiple measurements This is usually due to the fact that these individuals unintentionally do not find their normal relaxed posture in the measurement situation Variations in the pantoscopic angle of 5 are not uncommon for such individuals If despite several attempts an individual is unable to adopt a natural posture in the measurement situation it is useful to convert the measured value to a defined pantoscopic angle One example in this context is individuals who markedly raise their heads during measurement when looking at the fixation
7. 71 i Terminal mobile Carl Zeiss Vision GmbH EN 20 070 72971 Turnstrasse 27 i Terminal mobile D 73430 Aalen Subject to modifications Germany
8. F see Quick Guide Com mobile EN 20 070 72971 Terminal mobile Maintenance and service 41 Maintenance and service Performing software updates If software updates are available these are displayed in the Start screen of Com mobile in the inbox The update can be started directly from the inbox Service contact details In case of problems regarding i Terminal mobile please contact your national Carl Zeiss Vision distributor For the contact data please refer to the enclosed Service Contact List 20_070_72171 EN 20 070 72971 Terminal mobile 42 General Licensing Agreement for Terminal mobile software General Licensing Agreement for 1 Terminal mobile software General Licensing Agreement for Software Products of Carl Zeiss Vision GmbH Turnstrasse 27 D 73430 Aalen 1 Terminal mobile minimum system requirements Pad with IOS 7 and Retina Display Internal WiFi with Internet connection for updates and connection to ZEISS systems j Com mobile server incl software 1 Area of application This licensing agreement shall be valid for the use of the i Terminal mobile software We explicitly reserve the right to make changes and additions Conflicting license agreements shall not be part of this agreement Furthermore our General Terms amp Conditions in their respective currently valid versions shall apply Licensed item 2 1 The licensed item is the Terminal mobile standard
9. MFH 18 0 mm Auto Correction Height 0 0 mm Fig 20 Select the lens type the frame and activate the autocorrect feature Auto Correction EN 20 070 72971 i Terminal mobile 32 Operation e Select in the dropdown lists Lens type or Frame the type of lens or frame Fig 20 or Fig 21 Progressive Variable Corridor Fixed Corridor Short Other Multifocal Bifocal Trifocal Single vision Individual Standard Office Individual Plastic Standard Metal Short En Groove Mount Digital Drill Mount Digital Selecting lens type Selecting frame type Fig 21 Dropdown lists Lens type or Frame type Depending on the choice a suggestion for the recommended centration data is calculated and displayed e Using the handles displayed correct if necessary the setting for the fitting height y and the progression length frame fit Fig 20 e Compensate the head rotations using the Autocorrect feature Auto Correction Fig 20 To this effect tick off Auto Correction lt EN 20 070 72971 Terminal mobile Operation 25 Ce l compensation of the head rotation is activated the centration cross hair marks do not coincide with the pupil centers due to the compensation of head rotations e Touch Ne K In the next view Fig 22 you can determine shape and size of the raw glass Fig 22 Selection of shape and size of the raw glass e Select the raw glass shape via the dropdown l
10. al mobile Contents 3 Contents CONTENTS ici a ol td 3 Safety INStrUCHONS crassi uaa R a enaeeterses 5 A E EA 5 KAOT SL UCA rei E tunel ue cneecese seed 5 Safe TUMCUONING H 6 e A 6 Prerequisites regarding Operation 7 WEAN OG Sus dt A tea A ube TES 7 Use Or MEPA DT TTT 7 SCOPE Of SUPPOSE 8 Admissible spare parts sse eee eee eee 8 Directives regulations and standards cesses esec eee 9 Medical Devices Directive sssri RR 9 o O AA eS AEBS MN aaa a aS Oona EAR a ae 9 PROVISIONS TOP USE dd aclu 9 Standards a er a ee an eae er ee eee 10 COMMISSION NU PT 10 PHCRGQUISIECS ERE aad 10 Installing the software application Com mobile on the iPad 10 Starting Terminal mobile sss esec eee ee eee eee eee 12 A A 17 Use of the calibration togliersi gaad rnan 17 Positioning the customer for image capture sese eee eee ee ee eee eee 19 image capture TTT 20 Taking the siet d es tall dd bc 20 Taking side Tma TA EEEO E 23 Measuring back vertex distance and mounting lens angle 24 EN 20 070 72971 i Terminal mobile 4 Contents Determining the centration data sss sese eee 26 Determination of the centration point GosSTtioOn cece c ccc ceeeeeeeeeeeeeeeeeees 26 Selection of the lens type the frame type and activation of the autocorrect feature Auto Correction veria 31 Specific settings for i Terminal mobile sees ecce eee ee e 36 Setting option Centration 2 eonceo EGOR EEN eN oNN NS oNN CNS ev 37 Se
11. anual Provisions for use i Terminal mobile is a software application which is intended for use on an Apple iPad under OS in the ophthalmic optician s shop CE The software application may only be used by persons who dispose of the training knowledge and experience required to this effect Moreover please comply with the national quality directives valid in your country The further processing of the centration data determined requires fundamental ophthalmologic knowledge EN 20 070 72971 Terminal mobile 10 Commissioning Standards i Terminal mobile satisfies the requirements of the following standard IEC 62304 Medical Device Software Software life cycle processes Commissioning Prerequisites Active WLAN connection with access to Internet Completely installed configured and switched on Com mobile Box see Quick Guide Com mobile Pad with installed software application Com mobile see Quick Guide Com mobile Installing the software application Com mobile on the iPad CE To install the software application Com mobile e g on a second iPad proceed as follows To this effect the Com mobile Box must be switched OFF e Switch the Pad ON and enter the URL www zeiss com dti mobile solutions in the Safari Browser EN 20 070 72971 Terminal mobile Commissioning 11 e Complete the registration form and download the app The software application Com mobile
12. ced the second time the value should not be corrected Check in such cases if the head rotation is habitual If the measured head rotation is now significantly different we recommend using the Correction of head rotation function CE The calibration tool should be centered on top of the frame to allow precise calculation of the corrections due to head rotation EN 20 070 72971 i Terminal mobile 50 Glossary Natural posture Natural posture is the posture adopted by an individual in a standing or sitting position for a defined visual task facing straight ahead This posture is subject to certain natural variations in other words each individual in this situation will have not just one natural posture but a whole range of natural postures This range is specific to each individual depending on body height etc Strictly speaking a large number of measurements would have to be taken for each individual to determine the centration data on the basis of the average value For obvious reasons this method cannot be used to measure centration data Therefore we use a single random sample to determine the centration data Since the natural posture of most individuals varies within relatively confined limits pantoscopic angle of 2 even a single measurement is sufficient to fit the glasses Vertical differences of 1 1 5 mm occurring in multiple measurements can be considered normal and non critical Serial measurements have also shown
13. ction of the pupil during centration you can use the contrast feature of i Terminal mobile as required see Fig 17 right hand side e Touch Next E e Repeat positioning of the auxiliary frames and the pupil center for the left hand side e You can detect the shape of the lens at choice on the left or right side To this effect touch Frame tracing EN 20 070 72971 i Terminal mobile 30 Operation Detecting lens shape Lens shape detected Fig 18 Detecting the lens shape e Use the handle to adjust the form element to the inner contour of the lens shape Fig 18 CS Determination of the lens shape is useful in case lenses with optimized thickness are to be ordered e g Optima e Touch Next K The Auto y dialog appears Auto y Measured panto angle Manual panto angle 11 10 0 Fig 19 Auto y dialog EN 20 070 72971 Terminal mobile Operation 31 e Transfer the value measured for the pantoscopic angle or correct the latter manually and acknowledge at the appropriate option by Apply Fig 19 CE The Auto y dialog is only visible if the function Auto y is activated In the next view Fig 20 you can determine the lens and frame type Selection of the lens type the frame type and activation of the autocorrect feature Auto Correction Lens type Frame Head rotation compensation Manual Adjustment Reset Progressive able Corrider Plastic Head rotation 20 Framefit 4 0 Auto y 0 1 mm
14. e Touch to commence determining the centration data S If you want to cancel determination of the centration data touch X You can discard the photo in the following dialog via Exit without saving or save it for subsequent processing via Save new measurement In this case the photo is assigned to the current consultation The Adjust BVD dialog appears Fig 15 EN 20 070 72971 Terminal mobile 28 Operation Adjust BVD For measurements without side image please set the back vertex distance Fig 15 Adjust BVD dialog e Specify the manually measured back vertex distance BVD or accept a suggested value Acknowledge by touching Apply In the following views you can determine the centration data CS Centration starts with the right eye Adjusting auxiliary frame for frame Auxiliary frame adjusted Fig 16 Adjusting the auxiliary frame for the frame EN 20 070 72971 i Terminal mobile Operation 29 e Adjust the auxiliary frame for the frame via the handles Fig 16 so that all four lines are in contact with the inner edge of the frame e Touch Next E Terminal mobile Adjusting right hand centration point Right hand centration point position position adjusted contrast feature activated Fig 17 Adjusting the centration point position e Move the handle to adjust the measuring outline Fig 17 so that the circles are concentric to the pupil center centration point Ce To facilitate dete
15. e by one with the other hand see Fig 8 J OooO ororo OLE a CO O E A Fig 8 Calibration tool with frame e Make sure the calibration tool is positioned centrally on the frame Positioning the customer for image capture e Ask the customer to put on his her selected frame together with the centered calibration tool such as he she would do so later e Demonstrate to the customer how to adopt a natural relaxed position for image capture by means of the i Terminal mobile EN 20 070 72971 i Terminal mobile Operation Image capture Taking the front image Position yourself with the iPad at a distance of approx 40 to 50 cm in front of the customer It is recommended to make the measurement while standing Make sure to tilt the iPad as little as possible While in the iPad Centration module touch the i Terminal mobile tile to change over to image capture of i Terminal mobile Ask the customer to remain as immobile as possible in his her position to look into the camera colored mark on the iPad and not to blink Hold the iPad so that the camera is on top left when viewed by the customer Hold the iPad in vertical position keeping it as immobile as possible If the customer turns his her head in an unnatural fashion reposition him her anew The live image and the contour of a head with glasses on it appears on the iPad Select the distance so that the contour includes the customer s head Th
16. e contour of the frame is to enclose the glasses as well CS As soon as the contour in the live image changes to green and the customer s face coincides with the contour the photo can be taken EN 20 070 72971 Terminal mobile Operation 21 Terminal mobile Terminal mobile Touch screen to take picture Touch screen to take picture Image capture mode started Image capture in process Fig 9 Image capture mode e Touch on the screen of the Pad to start image capture A countdown starts at the end of which a photo or a series of photos is taken automatically This takes a few seconds The process can be observed via the status symbols 90900 oneal symbols are black recording is complete and the photos can be regarded successively on the Pad gt The countdown can be selected within a range of 1 to 5 seconds the number of photos taken in the range from 1 to 5 photos see the Com mobile Settings menu The values 3 seconds and 3 photos are recommended EN 20 070 72971 i Terminal mobile 22 Operation Please choose an image Fig 10 Photo selection e Swipe to select the best of the photos taken and touch Done e To measure the additional parameters back vertex distance and mounting lens angle touch optionally Side image see section Taking side image on page 23 e lf you do not want to perform this measurement on the side image touch Done Now Terminal mobile prepares the selected photo f
17. e licensor if the customer violates the terms of use as per section 4 of this licensing agreement and continues this behavior even after receiving written warning about termination from the licensor In the event of termination the customer shall delete or destroy all data carriers including all copies of the software Upon the licensor s request the customer shall send the licensor written confirmation of the full deletion or obliteration 6 Liability for material defects The following shall apply in addition to section 9 of our General Terms amp Conditions of Sale 6 1 Because the customer acquires the software via the Internet the licensor does not guarantee that the software is free from defects or computer viruses EN 20 070 72971 Terminal mobile General Licensing Agreement for Terminal mobile software 45 6 2 6 3 7 Provided that the software is used as intended the licensor guarantees that the software shall work as described in the product description This warranty does not cover defects resulting from changing damaging improperly or inappropriately using the software or using it in any way other than the intended use as defined in this licensing agreement Improper use exists in particular if the customer deviates from the described installation process In the event of a warranty or liability claim against the licensor contributory negligence of the licensee must be taken into consideration if the cu
18. e of the iPad Carl Zeiss Vision cannot assume any liability for the iPad being operative EN 20 070 72971 Terminal mobile 8 Scope of supplies Scope of supplies The scope of supplies includes Com mobile Box incl power unit and power cable Calibration tool in the storage case 2 ea User Manual Terminal mobile Quick Guide Terminal mobile electronic Quick Guide Com mobile electronic Label as fixation mark for the iPad camera Service Contact List 20 070 72171 Admissible spare parts The following spare parts can be ordered for utilization of Terminal mobile Calibration tool in the storage case ref no for 1 ea 1941298 ES The calibration tool is used to determine the centration data and is a consumable material with a limited service life EN 20 070 72971 Terminal mobile Directives regulations and standards 9 Directives regulations and standards Medical Devices Directive This software application complies with the EU Directive C C 93 42 EEC regarding medical devices and national implementation thereof in terms of the German Medical Devices Act MPG Please comply with the legal provisions for the prevention of accidents Risk class for software class A acc to MPG Intended use i Terminal mobile is a software application to determine the centration data of corrective lenses The application may only be used as specified in this User M
19. i Terminal mobile Centration e f necessary change the settings for i Terminal mobile regarding the Trigger Deferral in the range from 1 to 5 seconds the Maximum iPad tilt angle the Camera Shot Series in the range from 1 to 5 e Activate or deactivate the setting Require face detection to use or not to use this function for image capture e Touch Save in order to transfer the new settings and Done in order to exit the Settings menu EN 20 070 72971 i Terminal mobile Specific settings for Terminal mobile 39 Setting option Features e Touch the setting option Features DEMO VERSION 104 Features i Scription service Activate Enable i Scription calculation Activated i Terminal mobile Activated Fig 28 Setting option Features e Scription service Activate by entering the license number and by acknowledging via the Activate button e Enable i Scription calculation Status Activated e i Terminal mobile Activate by entering the license number and by acknowledging via the Activate button EN 20 070 72971 i Terminal mobile 40 How to put the unit out of operation How to put the unit out of operation Exiting 1 Terminal mobile The software application i Terminal mobile need not be exited separately It is closed together with the application Com mobile e Close i com mobile on the iPad see Quick Guide Com mobile e If applicable switch the Com mobile box OF
20. ining the previous vertical measurements would cause a change in visual habits With the Terminal mobile the required drop angle can be set in each case and the centration data can be calculated on this basis As in single vision lenses the recommended centration in multifocal lenses can also be vertically adjusted using the up down arrow keys The pop up window displays the respective vertical centration of the distance reference point y showing the difference from the measured value For bifocal and multifocal lenses the software also displays the vertical measurements for the near portion measured from the lower box edge h and the drop angle EN 20 070 72971 Terminal mobile Illustrations 53 Illustrations Fig 1 i Com mobile i Profiler mobile and i Terminal 2 icons ONAE IPA O eek e a ESA 11 Fig 2 COM MODILE MaN MEN serar E 12 Fig 3 Customer MENU i dci dei dona 13 Fig 4 Customer Mod le eoe a ieee ie 14 Fig 5 Summary MOQUE crac dean iio 15 Fig 6 Centration module esse 16 Fig 7 Open the locating grooves of the calibration too l 18 Fig 8 Calibration tool with Tame 19 Fig 9 IMAGE Capture mode sss eee eee 21 Fig 10 A ack ai eesti E E does 22 Fig 11 Capturing side Image eee 23 Fig 12 Measuring back vertex distance oooooccccccocccnccnnccnnnnnnacnnnnnos 24 Fig 13 Measuring mounting lens angle sss 25 Fig 14 Start screen in centration data acquisition mode
21. ist Oval Type Fig 22 Round decentered e Select the size of the raw glass via the Table Size select shape of raw Fig 22 glass EN 20 070 72971 i Terminal mobile 34 Operation Identical or different sizes can be selected for the raw glasses of the two sides The selected size is symbolized in the front image by green rings e Touch Next K The final screen shows all the measured and determined data as result Fig 23 Save and Exit Fig 23 Centration data and frame data CS Touch 4 Back in order to perform any necessary corrections e Touch Save and Exit in order to save the centering data and the image in Com mobile for the current consultation EN 20 070 72971 Terminal mobile Operation 35 The data is saved and Com mobile returns to the Centration module Fig 24 Centration is thus complete DEMO VERSION 104 Centration Centration Data Johnson Brenda Terminal mobile Diameter Centration Rule Primary Position Material Plastic Lens type Progressive Variable Corridor Frame Data Fig 24 Centration module an overview of the centration and frame data CS Touch the Centration pictures tile to re start centration of the picture taken previously C Eor all subsequent steps and supplementary explanations please refer to the Quick Guide Com mobile EN 20 070 72971 Terminal mobile 36 Specific settings for i Terminal mobile Specific settings for i Terminal
22. mine the centration data e The application of i Terminal mobile to determine the centration data in conjunction with the calibration tool is described in section Operation as of page 17 EN 20 070 72971 Terminal mobile Operation 17 Operation ca Acompact description of operation of the software application i Terminal mobile is provided in the Quick Guide Terminal mobile included in the scope of supplies Use of the calibration tool e Remove any supporting shims from the frame to avoid annoying reflections e To obtain an optimum result fit the customer with the selected frame in an anatomically correct and complete fashion The fit of the frame on nose and ears and the horizontal alignment are especially important CE Ifthe adjusted frame is modified subsequently the centration data must be determined anew EN 20 070 72971 i Terminal mobile 18 Operation e Open the clips 1 Fig 7 by pulling them outwards until they lock in ue O 0 0 0 S2ODOGODOC Sd Pee asl 2 Sy D 1 Clips 2 Groove edge Fig 7 Open the locating grooves of the calibration tool CS When the calibration tool is not in use keep it in its storage box e Take the calibration tool in one hand and place the frame onto the upper groove edge using the other hand see 2 Fig 7 EN 20 070 72971 Terminal mobile Operation 19 e Hold the calibration tool and the frame firmly with one hand and close the clips on
23. mobile C Inthe Settings menu of Com mobile certain parameters can be adapted for application of i Terminal mobile e In the main menu of Com mobile touch the Settings tile 1 Fig 25 to open the Settings menu Carl Zeiss Vision paraa 1 Settings tile Fig 25 1 Com mobile main menu The Settings menu is password protected EN 20 070 72971 Terminal mobile Specific settings for Terminal mobile 37 e Enter the factory set password Login i Com mobile Admin 12 or the currently assigned password and touch Login The Settings menu opens Fig 26 ca TO change the password use the setting option Server Setting option Centration DEMO VERSION 104 Settings uss Com mobile Terminal 2 Centration Default Back Vertex Distance Updates E Default WrapAngle lagnostic LOGON Enable Auto Y Dialog Enable Measurement Line Languages Server Eye center Pupil Center Backup amp Restore Side Picture Direction Left Single Vision Standard Center of Rotation Centration Rule Default material Import i Com Enable Diameter view Fig 26 Settings menu setting option Centration EN 20 070 72971 i Terminal mobile 38 Specific settings for i Terminal mobile e Touch the setting option Centration and scroll into the lower part of the dialog i Terminal Mobile Trigger Deferral Maximum iPad tilt angle Camera Shot Series Require face detection Fig 27 Settings for
24. ompendium under http www zeiss de kompendium Centration data summary vertical centre line A PD horizontal centre line right lens YR Fig 29 Sizes and designations regarding lenses and frames PD Pupillary distance M Geometrical center of the lens shape m Center to center distance of frame EN 20 070 72971 Terminal mobile 48 Glossary Zp Centration point Bp Distant reference point Bn Near reference point X Horizontal component of distant reference point measured from the nasal box edge y Vertical component of near reference point measured from the lower box edge y Vertical component of the distance reference point measured to the bevel apex directly below Zn Z Centration point distance In non prismatic lenses this corresponds to the single PD relative to the frame center In bifocal and multifocal lenses additional centration data are calculated for the near portion q Horizontal distance between near portion center and box edge h Height of near portion from lower box edge CS Eor further details concerning centration see standard ISO 21987 Correction of head rotation Auto Correction The Correction of head rotation function depicts a horizontal rotation of the head that is taken into account during measurement and subsequent correction of that measurement This function is used to correct the measured horizontal centration data PD and x by the amount of head ro
25. on Terminal mobile is indispensable to ensure safe operation Thus please familiarize yourself thoroughly with this operating manual before using the software Please also comply with the concise instructions and the online help of the iPad used and the Quick Guides for the Com mobile or the Terminal mobile For supplementary information please contact our service department or authorized dealers Always keep the User Manual Quick Guide within easy reach for the operators For further information please contact our Service Team Electrical safety If the software application Terminal mobile is operated correctly this system does not involve any electrical danger for customers or operators EN 20 070 72971 Terminal mobile Safety instructions Prerequisites regarding operation Please make sure that the following prerequisites are complied with and are retained for subsequent operation CS The use of Terminal mobile requires a functioning WLAN connection via WLAN router and access to Internet Before starting operation e Make sure that there is a stable WLAN connection with access to Internet e Make sure that the Com mobile Box is switched ON After operation e Availability of the software application Terminal mobile is terminated automatically on switching the Com mobile Box OFF WLAN mode Carl Zeiss Vision cannot assume any liability for the WLAN connection being operative Us
26. or determination of the centration data and changes over to centration data determination mode see section Determining the centration data on page 26 ca Touch Cancel to discard the photos and return to image capture mode EN 20 070 72971 i Terminal mobile Operation 23 Taking side image e Ask the customer to turn by 90 so that the calibration tool is visible As soon as the contour in the live image turns green a photo can be taken e Touch the screen to record the side image Once recording has been triggered a photo is taken automatically Terminal mobile Touch screen to take picture Fig 11 Capturing side image EN 20 070 72971 i Terminal mobile 24 Operation e Check that the photo is OK Otherwise take a new photo e Touch Done to measure the back vertex distance and the mounting lens angle see section Measuring back vertex distance and mounting lens angle on page 24 Le Touch Cancel to discard the photo and return to the image capture mode Measuring back vertex distance and mounting lens angle e Position the red mark on the front of the cornea using the handle e Should this not be possible due to an excessively broad side piece measure the back vertex distance manually Measuring back vertex distance Measuring mark positioned Fig 12 Measuring back vertex distance e To measure the mounting lens angle touch Wrap angle EN 20 070 72971 i Terminal mobile Operation 25 e
27. see Fig 4 Ce Ifthe customer does not appear in the overview you have to create a new customer data record or import the data from other sources see Quick Guide Com mobile EN 20 070 72971 Terminal mobile 14 Commissioning iPad 18 03 DEMO VERSION 104 gt Customer Data Conpultations Johnson Brenda Name 14 01 1999 Date of Birth 18 Bishopthorpe Road Pennance TR16 6Sp U K pi wki Address Contact Demo 1 New consultation tile Fig 4 Customer module e Touch New consultation 1 Fig 4 to determine a new container for storage of the data of the current consultation of the customer e Entera name for this consultation in the New consultation dialog which appears next and acknowledge the entry by pressing Done The Summary module appears see Fig 5 EN 20 070 72971 i Terminal mobile Commissioning iPad DEMO VERSION 104 Summary Johnson Brenda Centration Centration 1 Centration button in the menu bar Fig 5 Summary module e Touch Centration 1 Fig 5 in the menu bar The Centration module appears see Fig 6 EN 20 070 72971 i Terminal mobile 15 iPad gt Centration Johnson Brenda Centration US H Customer Summary Commissioning 18 49 DEMO VERSION 104 U Centration Data Exam 1 i Terminal mobile tile Fig 6 Centration module CS NOW you can touch the 1 Terminal mobile tile 1 Fig 6 to start image capture to deter
28. software together with its updates hereinafter referred to as software which our customers may download from our website 2 2 The licensee shall ensure that his her iPad meets the minimum technical requirements for installation of the i Terminal mobile software as well as associated updates 2 3 We emphasize that it is not possible to write software that always works flawlessly in all applications and combinations Therefore this license applies to software which can generally be used error free as defined by the software description EN 20 070 72971 Terminal mobile General Licensing Agreement for Terminal mobile software 43 3 2 4 2 4 3 4 4 Copyright This software is subject to copyright law The customer acknowledges that he she has no rights in relation to the software over and above those set out in this licensing agreement rather that these rights remain assigned to the licensor and or the respective owner There is no entitlement to the source code As necessary certain services and representations of the software may be carried out with the assistance of third party services We shall not be responsible for the contents and performance of third parties If third party services are used their General Terms and Conditions shall apply respectively Rights of use Within the scope of these conditions the customer shall be granted non exclusive personal usage rights license to the respec
29. stomer has failed to take precautions through appropriate security measures against external influences particularly computer viruses or other phenomena which might jeopardize data or an entire database General Terms and Conditions of Sale Furthermore our General Terms amp Conditions of Sale are applicable in their respective currently valid versions In the event of a contradiction the terms amp conditions of this licensing agreement shall take precedence 8 1 8 2 8 3 Final Provisions The contract shall be subject to the law of the Federal Republic of Germany exclusively Place of jurisdiction shall be the registered offices of the licensor If the customer is a merchant a legal person under public law or a Special fund under public law the exclusive place of jurisdiction for all claims arising from this contractual relationship shall be the regional court at the licensor s legal domicile EN 20 070 72971 i Terminal mobile 46 Abbreviations Abbreviations BVD Back vertex distance EEC European Economic Community EU European Union IEC International Electrotechnical Commission ISO International Standardization Organization MPG German Medical Products Act WiFi Wireless Fidelity WLAN Wireless Local Area Network local radio network EN 20 070 72971 i Terminal mobile Glossary 47 Glossary C For further information concerning measuring processes and the following topics please refer to the online c
30. tation The absolute distance between the centration points total PD remains unchanged What does change however is each of the monocular PD values by the amount of correction of head rotation parallel displacement EN 20 070 72971 Terminal mobile Glossary 49 The evaluation program calculates the horizontal positions of the centration points as if the customer had held his her head straight while the photo was being taken The extent of correction depends on the degree of head rotation and the back vertex distance The result per degree of head rotation Is a value of approx 0 5 mm for each side The purpose of the Correction of head rotation function is not to make the centration data PD and x symmetrical but rather to eliminate the portion which is caused by head rotation and which is not habitual The Correction of head rotation function may be enabled or disabled for each measurement The correction value will be displayed In this case the centration points will also be displaced horizontally by the correction value relative to the pupil center When should the Correction of head rotation function be used The Correction of head rotation function is recommended where an individual assumes a very unstable posture during image capture i e their posture does not appear to be reproducible In particular where there is significant head rotation we recommend that a second photo be taken If the head rotation is reprodu
31. tively purchased software in the as ordered version The customer shall be obligated to use the software for his own purposes only The customer shall be allowed to copy the software only insofar as is required for the contractual application of the software The customer shall therefore be allowed to install the software for use The customer shall not be permitted to copy the software fully or in part The customer may not commercially redistribute or sub license the software fully or in part The customer shall not amend delete or make otherwise unrecognizable copyright annotations trademarks and other legal reservations serial numbers and other features EN 20 070 72971 Terminal mobile 44 General Licensing Agreement for Terminal mobile software 4 5 The customer shall not change the software Decompilation of the software is only permitted in accordance with the legal restrictions of 69e of the German Copyright Act Further decompilation shall not be permitted 4 6 The customer shall not be permitted to transfer or give the software to a third party Moreover the customer shall not disclose to any other party passwords or login information for the software or databases associated with this software If third parties are interested in the software they may contact the licensor directly 5 Right to terminate the license Both parties shall be entitled to terminate this license for cause An important cause exists for th
32. tree eee ene ners Mare erence ners Cee ene ee ee ere eee 52 E Exiting i Terminal mobile sees 40 F A O A 29 30 Pee o 34 RNS YD OPEREN 31 G GIOSS OI ss Ae OU e A 47 EN 20 070 72971 Terminal mobile 56 Index H PICA CIT a A A Sadie A 48 How to put the unit out Of Operation 40 ME A A A AD 53 Mage caplUte ar H rod in Aas 19 20 O A A RS TR AA 55 Installing the software application 1 COM mobile 10 NENA Uri a a triada 9 L A EEE E 31 LICENSING agreement eee ee eee eee ee ee 42 M Main niani E lt ne e rocas os ade da iodo 12 Meli A A 41 Measuring ProceQqure soso 52 ME A te chee bee eae col ied ec ous Lol 9 Menu UISTORIEN a ds eon iedaclas 13 Module Contralor tl reia 16 Module Customer io eos a 14 MOI rSn ETT 15 N NE A O E 50 O A A A Nadal Panett 17 P PantoscOpie MU a N 31 51 EN 20 070 72971 i Terminal mobile Index 57 POSITION OF centr aton eei 26 POSITIONING ME CUSTOM rua seed dl en 19 PECTEQUISILOS ariete 10 PFOVISIONS HOM US aid nic aplico 9 R A O A dat ere eenaraeeeaeanee ae 9 S Sate TUNG ieii o io laters 6 A E E 5 a AA saeioaeea os 8 SEVICE ee eh ee Oe ee ee 41 Service contact aetas neesan a E 41 SENOS ii E eine eee einesa aa 36 SOT Wal GW Cla LC ile 41 Sale palta epa np ode 8 SU COS ce atte ELT PREE eh tet adeno tats neta eg adc ah signa 9 10 SALA ao 12 A RTD 5 U A aa aia aaa eS estates ae ascine vat oesecewene 41 V Vertical COMEN n E anedavens 51 EN 20 070 729
33. tting OPTION Features isc Rai 39 How to put the unit out of operation sese eee ee ee eee e e e 40 gt 40 Maintenance and Service see eee eee eee 41 Performing software updates sss sese eee eee eee 41 Service contact details ui id 41 General Licensing Agreement for Terminal mobile SONA E Eno AP 42 ADDITION e da ss 46 OS AA a o EEEN eee 47 Contration Gata aa 47 Correction of head rotation Auto Correction oooocoocccoccnconcncnncncnnonnas 48 E posture AAA A A Ea HA Ha EEEE E G 50 Vertical correction AULA aT INMBennnenanane anesetnenin ln sunsninanenenananan enanenananenasinans 51 Calculation of centration data for bifocal and multifocal lenses drop angle AAA A sadoscateauesasaenenea asad 52 Iaea o p e 5 A E E E EAA EA EE 53 e EEEN E L E A AA E A EEA AE AE ey E EEE eee 55 EN 20 070 72971 i Terminal mobile Safety instructions 5 Safety instructions General The software application i Terminal mobile has been developed and tested according to national and international standards This ensures a high degree of functional reliability Observe all safety instructions and information contained in this User Manual and attached to accessories Symbols used Points out dangers which may give rise to damage CE This information points out important information to facilitate your work EN 20 070 72971 Terminal mobile 6 Safety instructions Safe functioning Correct operation of the software applicati
Download Pdf Manuals
Related Search