Home
Proximity Access Controller
Contents
1. 6 If turn on power RFL200 IP RFL200 operates normally At this time a card which had been first read on RFL200 IP RFL200 is registered as a master card Xx Caution After registering a master card the unit is automatically master mode Star RFL200 IDTECK 4PASS P RFL200 10 FCC Registration Information FCC REQUIREMENTS PART 15 Caution Any changes or modifications in construction of this device which are not expressly approved by the responsible for compliance could void the user s authority to operate the equipment NOTE This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interface and 2 This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class A Digital Device pursuant to Part 15 of the FCC Rules These limits are designed to this equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the radio or television off and on the user is encouraged to try to co
2. After registering a master card the unit is automatically on master mode 9 7 When a product is initialized by using a master card 1 If master card is read on the unit buzzer sounds one time upper three LEDs change green 2 On master mode if you make master card read again upper green three LEDs flicker That means on initialization mode of product 3 On initialization mode if you make master card read again the unit is initialized 4 With beeping four times all LEDs changed red It appears to finish initialization of product 5 If you make power on RFL200 IP RFL200 operates normally At this time registered card earlier on the RFL200 IP RFL200 is registered as master card x Caution v If user card is read on initialization mode of product the unit is general mode User card isn t registered or deleted v After registering a master card the unit is automatically master mode 9 8 When a product is initialized by wiring the cable 1 As power off make white green and yellow wire are close 2 3 4 5 As power on all LEDs turn red or green color After repeating on off twice they become off As the power off only green LED turn on from the under to the top All LEDs become green RFL200 IP RFL200 s buzzer sounds four times It indicates to complete initialization vz Nr Nr rv After finishing to initialize connect again white green and yellow wire to a device which had been basically connected as power off
3. If you are not sure of the type of power supplied to your installation site consult your dealer of local power company 6 Never insert objects of any kind into the product or through the cabinet slots as they may touch voltage points and or short circuit parts possibly resulting in fire or electric shock Never spill liquid of any kind on the product 7 Never disassemble this product by yourself take the unit to a qualified service center whenever service or repair is required Opening or removing the covers may expose you to dangerous voltages or other risks Also incorrect reassembly can cause electric shock when the unit is subsequently used 8 Unplug this product from the Direct Current DC power source and refer to qualified service personnel under these conditions a When the power supply cord or plug is damaged or frayed b If liquid has been spilled on the product c If the product does not operate normally after following the operating instructions in this manual Adjust only those controls that are covered by the operating instructions in this manual Improper adjustment of other controls that are not covered by this manual may damage the unit and will often require extensive work by a qualified technician to restore normal operation d If the product exhibits a distinct change in performance 2 General The Star RFL200 iPASS IP RFL200 is an elegant looking and an attractive 4 read range proximity reader built in Proxim
4. User s Manual Star RFL200 ss P RFL200 Proximity Access Controller Star RFL200 PASS P RFL200 Table of Contents 1 Important Safety Instructions rssersvranernvrnnernvrenernvrnnernvrenersvrnnersvrenersernne 3 CQ UU FOS EE EE 4 4 Identifying Supplied Parts rssranornvrnnvrnvrnnernvennvrnnrnneravesnvrsnesnersversersnessernnnn 4 FEN 5 Os FEE LGT EEE ER 5 7 Color Coded amp Wiring Table rrsvravernvrnnennvravennvrnnernernnrnnersvernersnrsnersnennersnenn 6 8 Wire Connection to Controller ssssessssssssunnsnsnnnnnnnnnnnnnnunnnnnnunnnnnnnnnnnnnnnnnae T 9 OPEN ae 8 10 FCC Registration Information rrseravranvravennvrnvrnneravennvrnnennersversernnernernnnn 10 11 Warranty and Service siccisinsesaccacscncassciiaissctatcasscitieetusnaaiaadtaneunnien 11 Star RFL200 IDTECK 4PASS P RFL200 1 Important Safety Instructions When using Proximity Access Controller basic safety precautions should always be followed to reduce the risk of fire electrical shock and injury to persons In addition the following safety guides should also be followed 1 Fully read and understand all instructions and follow them completely 2 Follow all warnings and instructions marked on the product 3 Do not use liquid or aerosol cleaners Use a damp cloth for cleaning If necessary use mild soap 4 Do not use this product near water 5 Only operate this product using the type of power source indicated
5. ck type In a power fail safe connect GND wire of power supply to Yellow wire of door lock type input In a power fail secure put a floating state on Yellow wire of door lock type input Star RFL200 IDTECK 4PASS P RFL200 9 Operation 9 1 When power Is supplied 1 All LEDs display red or green Then they repeat on off twice and become off 2 As power off red LED turns on from the under to the top in order And all LEDs turn red 3 RFL200 IP RFL200 s buzzer sounds one time 9 2 Whether registered key tag is read on RFL200 IP RFL200 or an exit button is pressed 1 All LEDs turn from red to green From the top to the under they are off and on in order When all LEDs are off they turn red 2 At this time the door is opened by definite time And the upper of two LEDs turn green This means that open the door 3 RFL200 IP RFL200 s buzzer sounds one time 9 3 When unregistered key tag is read on RFL200 IP RFL200 1 All LEDs turn red Then they repeat on off twice and become on 2 RFL200 IP RFL200 s buzzer sounds twice 9 4 If key tag is approached by RFL200 IP RFL200 when the door is opened 1 The upper of two LEDs still display green color It means that open the door With the rest of LEDs they indicate whether authentication or not 9 5 When a key tag is deleted or registered 1 If master card nears the product buzzer sounds one time and the upper of 3 LEDs turn green 2 If a key tag that wish
6. el number and date of purchase 2 Bill to address 3 Ship to address 4 Number and description of units shipped 5 Name and telephone number of person to contact 6 Reason for return and description of the problem NOTE Damage occurring during shipment is deemed the responsibility of the carrier and claims should be made directly to the carrier 11 Star RFL200 PASS P RFL200 The specification contained in this manual are subject to change without notice at any time OF Ace Techno Tower B D 684 1 Deungchon Dong Gangseo Gu Seoul 157 030 Korea Tel 82 2 2659 0055 Fax 82 2 2659 0086 E mail webmaster idteck com MAML20HE3X May 2006 Copyright 2006 IDTECK Co Ltd
7. ity Single Door Access Controller which can be mounted to a metal door frame mullion or to any flat wall surface The Star RFL200 iPASS RFL200 is epoxy potted that ensure you a successful operation even in harsh environments Using 512 key tag not only controlling door but also convenient registration or deletion When loosing a key tag it is easy to reset Therefore it is the safest controlling door device Two color LED of green and red internal Piezo buzzer sound will guarantee you an accurate and reliable Door Access Operations IDTECK 3 Features 125KHz Standalone Proximity Access Controller Star RFL200 PSK Modulation IPASS IP RFL200 ASK EM Format 512 Users including One Master Card Standalone No need application software Direct Control of Door Lock Power Fail Safe or Power Fail Secure Locks selectable Solid Epoxy Potted Waterproof Warranty Life Time 4 Identifying Supplied Parts Please unpack and check the contents of the box Main Module 1ea r F i 3 0 30 Screw 2ea RFL200 IP RFL200 Bezel 1ea VA 3 025 Screw 2ea RFL200 MASTER CARD Card and Key Tags 6ea Anchor Bolt 2ea Star RFL200 PASS P RFL200 User s Manual Star RFL200 irass P RFL200 Proximity Access Controller User s Manual 1copy Star RFL200 IDTECK PASS P RFL200 5 Specification Model RFL200 IP RFL200 Dual 8bit Micropr
8. nstall the main unit using two 6 32 or M3 screws 6 32 hole O 6 32 or M3 Screw O 1 2 hole NW 6 32 N Reader Module KS 7 Color Coded amp Wiring Table SIGNAL Main Power 12V Red Power Ground GND Black Aux In 1 Yellow Door Contact In Exit Button In Alarm Out Door Lock Out Not Connect Not Connect Not Connect Please cut out tail connector before installation Star RFL200 IDTECXK PASS P RFL200 8 Wire Connection to Controller Oj Exit Button lt Caution Select lock type as shown below v Power Fail Safe Mode Always open at power off Connect lock type of Yellow with Door Lock Black wire v Power Fail Secure Mode Always close at power off Disconnect lock type of Yellow wire DC 12V Power Supply Connecting a power supply 8 Connect 12V of power supply to Red wire Connect GND of power supply to Black wire 8 2 Connecting a door lock Connect wire of door lock to 12V wire of power supply Connect wire of door lock to white wire of reader module 8 3 Connecting an exit button Connect Green wire of exit button input to one wire between wires of exit button Connect GND wire of power supply to the other wire 8 4 Connecting a door sensor Connect COM terminal of door sensor to Blue wire of door sensor input Connect NO terminal of door sensor to GND of power supply 8 5 Connecting a door lo
9. ocessor Program Memory 64KByte Flash ROM Data or 4KByte EEPROM 512 Users Including 1 Master Card IDK50 IMC 125 IPK50 Up to 2 inch 5cm Up to 2 inch 5cm in massive Tyce IDC80 IDC170 IPC80 IPC170 g Up to 4 inch 10cm Up to 4 inch 10cm Reading Time Card 30ms Power Current Input Port 3ea Exit Button Door Sensor Lock Type Select Power Fail Safe Power Fail Secure 2ea Output Port TR Output Open Collector Output Rating Max 2A Lock Output LED Indicator 9 Array LED Indicators Red and Green Beeper Piezo Buzzer Operating Controller 35 to 60 C 31 to 140 F Temperature Sontroler __ RF Reader 35 to 65 C 31 to 149 F Operating e y Af Reaver 10 to 90 relative humidity non condensing Color Material Dimension W x Hx T 1 8 x 4 9 x 0 8 45mm x 124m x 19 64mm wa 80g 0 18 Ibs Warranty Life Time Certification FCC CE MIC 6 Installation Memory 6 1 Drill one 0 5 12 7mm hole at the central of the RFL200 IP RFL200 on mullion or wall mount Route the cable of reader module through the central hole Star RFL200 PASS P RFL200 6 2 Drill one 0 39 10mm in right horizontal and 1 74 44 4mm in upper vertical through the central hole And drill the other 0 33 8 5mm in left horizontal and 1 59 40 6mm in under vertical through the central hole IDTECK 6 3 Push reader module on mullion or wall mount then i
10. rrect interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on another circuit 4 Consult the dealer or an experienced radio TV technician for help 10 IDTECK Star RFL200 PASS P RFL200 11 Warranty and Service The following warranty and service information applies only to the United States of America and Republic of Korea For the information in other countries please contact your local distributor To obtain in or out of warranty service please prepay shipment and return the unit to the appropriate facility listed below Headquarters IDTEGK Co Ltd 5F Ace Techno Tower B D 684 1 Deungchon Dong Gangseo Gu SEOUL KOREA 157 030 Tel 82 2 2659 0055 Fax 82 2 2659 0086 E mail webmaster idteck com Website www idteck com U S Branch RF Logics Inc 370 Amapola Ave 4106 Torrance CA 90501 Tel 310 782 8383 Fax 310 782 8298 E mail rflogics rflogics com Website www rflogics com Hong Kong Branch IDTECK Hong Kong 12 F B2B Centre No 36 Connaught Road West Hong Kong Tel 852 2581 9580 Fax 852 2234 5150 E mail alchu qala com hk Website www ristarhk com Please use the original container or pack the unit s in a sturdy carton with sufficient packing to prevent damage include the following information 1 A proof of purchase indicating mod
11. to register new is read by the product buzzer sounds one time And the rests except the upper of 3 LEDs turn green From the top to the under they are off in order When all LEDs are off LEDs turn red again At this time a key tag is registered 3 If a key tag is already registered buzzer sounds twice The rests except the upper of 3 LEDs turn red They repeat on off twice and become on At this time a key tag is deleted 4 After finishing to register or delete a key tag if reading a master card again the upper of 3 LEDs turn red with beeping one time And all LEDs turn red Xx Caution On the master mode if user card is read for 7 sec the unit is automatically on general mode 9 6 When a master card is deleted lost changed or registered again e g the lost or the change of a master card 1 As power off they make purple and blue wire close IDTECK Star RFL200 PASS P RFL200 2 As power on all LEDs turn red color with beeping twice Then they repeat twice and become on At this time a master card is deleted 3 After finishing to delete a master card be off the power Connect again purple and blue wire to a device which has been connected basically 4 As power off RFL200 IP RFL200 operates normally At this time a card which had been first read on RFL200 IP RFL200 is registered as a master card If you make already registered user card read it will be deleted and then registered as master card Xx Caution
Download Pdf Manuals
Related Search
Related Contents
Guide d`utilisation du logiciel GWERN Version 7 BRK electronic EL52-2 User's Manual Manuale DT45 User Manual - Skope Industries Guida dell`utente cardo BK-1 User Guide ER-N34PR Copyright © All rights reserved.
Failed to retrieve file