Home

Exploring Logic Pro 9

1. As projects grow large and more complex you may find it useful to temporarily limit the number of channel strips displayed to those you need to focus on for a given task You have the option to switch the Mixer between three different views Single Arrange and All You can also determine which channel strips are displayed using the filter buttons Getting Ready Open the Mixer area in the demo project Open the Helena Beat demo project Click the Mixer button at the bottom of the Arrange area or press the X key Try This Customize the Mixer view using the filter buttons Deactivate all filter buttons except for the Inst button Only instrument channel strips are now visible in the Mixer area Activate the Audio button and deactivate the Inst button Only audio channel strips are now visible in the Mixer area Customize the Mixer using the view buttons Select the channel strip Lead Vocal 1 then click the Single button Single view limits the Mixer display to a single channel strip that of the track selected in the Arrange area and its signal flow Click the Arrange button In Arrange view the Mixer displays all channel strips that correspond to tracks used in the Arrange area and their signal flow In this case your settings from when you last activated the Audio button and deactivated all others are still intact The settings are saved with the view Chapter9 Mixing the Project 141 142 Working with Cha
2. Three new flex markers are created on the clicked transient marker on the previous transient marker and on the next transient marker 116 Chapter 7 Flex Time Editing Experiment with time compression and expansion by dragging the middle flex marker to the right or to the left Press the Space bar to listen to the result of this time stretching and compression Depending on the direction you move the middle flex marker the audio material between the center and right flex markers is either time compressed or expanded and the same is true for the audio material between the center and left flex markers Time expanded audio es compressed audio Chapter 7 Flex Time Editing 117 118 Creating and Moving Flex Markers with the Flex Tool You also have access to Flex Time editing with the Flex tool The Flex tool allows you to drag points in the region s waveform and move them where you want The waveform s movement is restricted by transient markers on either side of the place you began dragging To extend the editing area drag beyond these transients and the boundary will extend to the next or previous transient Getting Ready Turn off Flex view and select the Flex tool Choose View gt Flex View Flex view is turned off and all audio tracks return to their default view Choose the Flex tool from the Left click Tool menu in the Arrange area Chapter 7 Flex Time Editing Try This Create and drag flex mark
3. Amp Designer from the pop up menu Repeat the steps for Insert slot 2 choosing Pedalboard from the pop up menu Click the Input Monitoring button This allows you to hear incoming audio even when the track is not record enabled useful for setting audio levels or practicing before recording Play your guitar and you should hear it as well as see the level meters moving on the left Arrange channel strip Chapter 4 Recording and Comping Audio 63 Try This Record an audio track Click the selected audio track s Record Enable R button gt Global Tracks The track is ready for recording 2 Click the Record button in the Transport bar to start recording You can also press the Asterisk key on keyboards with a numeric keypad or the R key on other keyboards Record button Recording will begin after the predefined count in 3 Play your instrument 4 Click the Stop button in the Transport bar or press the Space bar to stop recording Stop button The selected audio track contains a new audio region that displays a graphical overview of the waveform Chapter 4 Recording and Comping Audio Recording Audio Takes When you record over a pre existing region Logic Pro creates what is called a take folder which contains multiple take regions A common scenario is when you record multiple passes while in Cycle mode for example if you are recording multiple versions of a solo You can also do this by simply record
4. Replace Recording MIDI Recording MIDI Takes Key Concepts Contents 93 94 96 98 99 103 105 106 107 109 111 18 120 122 123 123 126 128 129 131 133 134 Chapter 6 Creating an Arrangement Previewing the Demo Project Dividing Regions Merging Regions Copying Regions Cropping Regions Editing Arrange Sections Key Concepts Chapter 7 Flex Time Editing Exploring Flex View and Flex Modes Creating and Moving Flex Markers in Flex View Creating and Moving Flex Markers with the Flex Tool Quantizing Audio Key Concepts Chapter 8 Editing MIDI Events Exploring the MIDI Editors Selecting Notes Creating Notes Editing the Position of Notes Editing the Length of Notes Muting Notes Editing the Velocity of Notes Contents 136 137 139 140 142 145 147 148 151 153 154 157 160 162 163 163 164 6 Quantizing Notes Key Concepts Chapter 9 Mixing the Project Exploring the Mixer Working with Channel Strip Groups Adding Effects to Multiple Channel Strips Creating a Submix Routing Signals with a Multi Output Instrument Key Concepts Chapter 10 Automating Your Mix Exploring Track Automation Using Touch and Latch Modes Creating and Editing Automation Nodes and Lines Key Concepts Chapter 11 Getting Answers Exploring Logic Pro Help What s Next Contents Welcome to Logic Pro 1 If you are new to Logic Pro or have a limited knowledge of the application this guide is for yo
5. The Volume fader does not follow existing automation data on the track as in Touch mode Instead the Volume fader continues to remain in the position it was in when you released the mouse button Drag the Volume fader vertically when you encounter existing automation data from bar 29 onward The existing automation data is overwritten Release the Volume fader after a couple of bars The Volume fader once again remains in the position it was in when you released the mouse button Press the Space bar to stop playback Latch mode works like Touch mode but the current value replaces any existing automation data after you release the fader or knob Chapter 10 Automating Your Mix 159 160 Creating and Editing Automation Nodes and Lines In this section you ll experiment with creating and editing automation nodes and lines Line Node Try This Create automation nodes Click on or just outside an automation line not on a node A new node is created Hold down the Command key which triggers the Command click tool with the Marquee tool currently assigned while dragging across a region Click the marquee selection area with the Pointer tool A node is created at both marquee borders Select any region by clicking its header area then choose Track gt Track Automation gt Create Nodes at Region Borders One node is created at each end of the region You can also choose Track gt Track Automation gt Create Two Nodes at Regi
6. e Library tab Tab within the Media area that is used to handle all setting files for channel strips effects and instruments e Channel strip setting Represents the routing of a channel strip including all inserted effects or instruments plus their settings e Overdubbing The process of recording a performance in multiple passes merging the performances into a single region e Cycle function A function that constantly repeats the area between the left and right locator positions e Replace mode The process of erasing all or part of a previous performance while recording a new one e Take A recording Logic Pro allows you to create several takes one after the other without leaving record mode e Take folder A container for multiple takes Chapter 5 Recording MIDI 91 Creating an Arrangement 6 You create an arrangement by dividing copying cropping repeating cutting and inserting regions and region sections In this chapter you ll work with audio and MIDI regions in the Arrange area to create an arrangement for your song You ll use the following selection and navigation features Left locator Cycle range Right locator Playhead Marquee tool e Marquee tool Tool used to select and edit parts of regions by dragging across them e Cycle range Repeated section of a project shown as a green stripe in the Bar ruler e Left and right locators Define the start and end points of a cycle ra
7. Write mode All automation data on a track is erased the minute you start playback with Write mode enabled Try This Create automation data using Touch mode Select Track 22 PolySix A click the Automation Mode button then choose Touch from the pop up menu lt 2 Press the Space bar to start playback 3 Drag the Volume fader on the left Arrange channel strip vertically Y J ui C am O Volume fader i PolySix 4 Release the Volume fader after a couple of bars The Volume fader follows existing automation data on the track Chapter 10 Automating Your Mix 157 5 Drag the Volume fader vertically when you encounter existing automation data from bar 29 onward The existing automation data is overwritten 6 Release the Volume fader after a couple of bars The Volume fader once again follows existing automation data on the track 7 Press the Space bar to stop playback Touch mode allows you to modify the value of the chosen automation parameter when automation is active After releasing the fader or knob the parameter follows existing automation data on the track 158 Chapter 10 Automating Your Mix Create automation data using Latch mode Click the Automation Mode button on Track 22 PolySix A then choose Latch from the pop up menu 2 Press the Space bar to start playback 3 Drag the Volume fader on the left Arrange channel strip vertically 4 Release the Volume fader after a couple of bars
8. copied Chapter 8 Editing MIDI Events 129 Change the pitch of note events Click any Piano Roll key to select all note events of the same pitch then drag the note events vertically Note 1 A 3 127 2b 8 2 The pitch of the selected note events is changed 130 Chapter 8 Editing MIDI Events Editing the Length of Notes You can edit the length of note events in the Piano Roll Editor individually or in relation to one another Try This Change the length of a note event Drag the left or right edge of any note event The event is either shortened or lengthened depending on the direction you drag Length Change Note 1 A 2 127 zeae Select any two note events then hold down the Shift key while dragging the right edge of one of them The same end point is set for both notes a Length Change Note 1 A 2 127 2 13 Chapter 8 Editing MIDI Events 131 Select any two note events then hold down the Shift and Option keys while dragging the right edge of one of them The same length is set for both notes and you can resize them ih Equal Length Note 1 A 2 127 tye ee Select any note event then choose Functions gt Note Events gt Note Force Legato selected any from the local menu bar The selected note is lengthened up to the following note event regardless of whether or not the following note is selected Select any two note events click the first and Shift click the s
9. in the Transport bar or press the Space bar once you re done Stop button Play button 4 Click the Play button in the Transport bar or press the Space bar to play back the recording Chapter 5 Recording MIDI 83 Quantizing MIDI If you re not happy with the timing of your performance you can use the Quantize feature to correct the timing of MIDI notes to the nearest selected musical time value You do this using the Quantize pop up menu in the Inspector s Region Parameter box Getting Ready Set an appropriate zoom level for the MIDI region Hold down the Option and Control keys which triggers the Zoom tool then drag across the MIDI region you recorded in the previous section 84 Chapter 5 Recording MIDI Try This Correct the timing of note events Open the Quantize pop up menu and choose 1 16 Note Watch how the note events change position in the MIDI region This value is generally a good place to start for duplet based rhythms dividing a beat into two even pieces Open the Quantize pop up menu and choose off The MIDI note events are returned to their original positions Open the Quantize pop up menu and choose 1 12 Note which is the equivalent of an 8th note triplet The note events move position in the MIDI region This value is generally a good place to start for triplet based rhythms dividing a beat into three even pieces Chapter 5 Recording MIDI 85 86 Overdub Recording MI
10. just described 32 Chapter 2 Building a Basic Project Creating a Basic Arrangement You ll do the majority of region editing and arrangement in the Arrange area Besides standard copy cut and paste operations you can move delete loop and resize regions and more Try This Move regions Using the default Pointer tool drag Woody Latin Bass 01 to bar 5 and Live Edgy Drums 05 to bar 9 Delete a region Select the Fusion Electric Piano 01 audio region on the audio track then press the Delete key The region is deleted from your arrangement but not from the project Click the Bin tab and you ll find that the region is still there Loop regions Drag the upper right corner of the Classic Rock Steel 01 region to the right note the Loop pointer up to bar 9 H kein v Track Region MIDI Audio View v Snap Smart Drag Over Classic Rock Steel Of Loop pointer TTT Upright Jazz Bass Loop 9111 2 Chapter 2 Building a Basic Project 33 Drag across the other two regions to select them then select the Loop checkbox in the Inspector s Region Parameter box The two selected regions loop to the project end Region Parameter box Loop checkbox Tip Press the L key to quickly loop or unloop selected regions 34 Chapter 2 Building a Basic Project Change the length of regions Drag the lower right corner of the Woody Latin Bass 01 region from bar 9 to bar 7 The looped regi
11. playback recording and editing of MIDI regions which play internal software instruments A MIDI region is a rectangular object that resides on a software instrument track It contains MIDI events individual notes or commands that are generally created with a MIDI keyboard Chapter 2 Building a Basic Project After creating a project you can quickly save it When you save a project a project file is saved within a project folder which can contain the project s audio files and other assets such as sample and movie files Saving a project with assets simplifies archiving and exchanging projects but increases the project folder s size Save the project Choose File gt Save As in the main menu bar or press Command Shift S make the following selections in the Save As dialog then click Save Type a project name Browse to a save location Ensure that the Include Assets and Copy external audio files to project folder checkboxes are selected Selecting additional options increases the project folder s size 12 Chapter 2 Building a Basic Project Exploring the Arrange Window The Arrange window is the primary working window of Logic Pro It incorporates the most important working areas and editors including the Arrange area The Arrange area is the primary working space of Logic Pro It is used to record edit and arrange the audio and MIDI regions of a project Your Arrange window should look
12. slot then choose Amps and Pedals gt Amp Designer The Amp Designer plug in window opens Change some settings Click hold the channel strip s Setting button choose Save Channel Strip Setting as from the pop up menu type a name for the channel strip setting in the dialog then click Save Click hold the Setting button then choose a different setting from the pop up menu Your channel strip setting is replaced with the new one Click hold the Setting button then choose your previously saved channel strip setting from the pop up menu Your previously saved setting is recalled Reset a channel strip setting Click hold the Setting button in the left Arrange channel strip then choose Reset Channel Strip from the pop up menu In a single action the channel strip setting name the Instrument slot and the Insert slots are reset to their default values Chapter 3 Working with Instruments and Effects 57 Key Concepts e Channel strip A virtual representation of a mixing console channel strip Can be used to insert instruments and effects using the channel strip s Instrument and Insert slots e Instrument slot A panel on a channel strip where you insert an instrument plug in e Insert slot A panel on a channel strip where you insert an effect plug in e Effects Color or shape the tone of existing audio recordings software instruments and external audio sources in real time e Instruments Used for real time playbac
13. the recording steps from the last task but without turning on Cycle mode Chapter 5 Recording MIDI 87 88 w N Replace Recording MIDI Replace recording is the process of erasing all or part of a previous performance while recording a new one You ll do this by recording in Replace mode Try This Record over an existing MIDI region in Replace mode Click the Replace button in the Transport bar Cycle button Replace button Make sure that Cycle mode is turned on Press the Return key while Logic Pro is not playing The playhead moves to the project start position Press the Asterisk or R key to start recording Recording will begin after the predefined count in Use your MIDI keyboard or the Logic Pro Caps Lock Keyboard to play some notes A new MIDI region is created on top of the existing one Press the Space bar to stop recording Your new recording replaces whatever portion of the previous material you recorded over repeating the process for each cycle pass if recording in Cycle mode Chapter 5 Recording MIDI Recording MIDI Takes While you will usually want to record multiple cycle passes into a single region take recording is also an option Take recording allows you to record over an existing performance and results in the creation of a take folder with each recording inside A common scenario is when you are recording multiple passes in Cycle mode but you can also do this by recording over an e
14. 05 T Melodic Pattern 06 T Simple Melody Setting Setting Chapter 3 Working with Instruments and Effects 53 Loading Channel Strip Settings You can load a whole chain of plug ins using channel strip settings When you load a channel strip setting to an audio channel strip you load a chain of effects In the case of instrument channel strips you load an instrument and a chain of effects Channel strip settings can be accessed from the Setting button directly on the channel strip or from the Library tab in the Media area Getting Ready Select a software instrument track and open the Library 1 Select the software instrument track used in the previous section 2 Click the Library tab in the Media area if the Library is not open 54 Chapter 3 Working with Instruments and Effects Try This Load a channel strip setting from the Library 1 Navigate through the categories and subcategories in the Library then click any of the entries known as settings The Setting button Insert slots and Instrument slot on the left Arrange channel strip are updated to reflect the channel strip setting and its effect and instrument plug ins Setting button Insert slots Instrument slot 2 Use your MIDI keyboard or the Logic Pro Caps Lock Keyboard see Chapter 2 to play some notes Chapter 3 Working with Instruments and Effects 55 3 Repeat steps 1 and 2 trying out different channel strip set
15. Basic Project 21 22 Add an Apple Loops audio file to your project Click the All Drums button then drag Live Edgy Drums 05 into the empty Arrange area to start at bar 1 A new audio track is created with the original audio recording added to it 1 Steel String Aco TTT Upright Jazz Bass Audio region Add a software instrument Apple Loops file to an audio track Click the Reset button followed by the Elec Piano button then drag Fusion Electric Piano 01 onto the existing audio track lane directly after Live Edgy Drums 05 The software instrument Apple Loops file is added as an audio region containing the original audio recording Browse Apple Loops by category Click the left view button to switch to Column view Click here to switch to Column view Chapter 2 Building a Basic Project 2 Click the By Genres category folder followed by Electronic in the second column followed by Beats in the third column The value in parentheses indicates the number of files that fall into this subcategory Beats The files are shown at the bottom of the tab Tag Apple Loops as Favorites For any Apple Loops that you like or wish to use again later select the Fav Favorites checkbox This adds the loop to the Favorites category displayed whenever you click the Favorites button or category Chapter 2 Building a Basic Project 23 Navigating the Project You control navigation and playback a
16. Command clicking ay tiayneas y Vi Rajta E _ Command click Tool menu Left click Tool menu Chapter 2 Building a Basic Project Try This Choose a tool Click the Left click Tool menu at the upper right of the Arrange area then choose a tool Press the Esc key on your computer keyboard The Tool pop up menu floats at the current pointer position Choose a tool from the pop up menu to make it active Press the Esc key twice more to make the Pointer tool active fh Pointer Tool 1 2 3 4 s 6 7 8 9 o a w E R Click the Command click Tool menu at the upper right of the Arrange area then choose a tool A second tool is assigned for use via Command click Chapter 2 Building a Basic Project 31 Zoom regions Using the default Pointer tool click the Classic Rock Steel 01 region to select it then press the Z key The screen is zoomed in on the selected area Press the Z key again to return to the original zoom setting Choose the Zoom tool from the Left click Tool menu and drag across the Classic Rock Steel 01 region The screen is zoomed in on the selected area With the Zoom tool selected click anywhere in the Arrange area background The zoom level returns to the original setting or backtracks through previous zoom steps if the tool was used multiple times Tip If the Zoom tool is not assigned holding down the Option and Control keys provides quick access to the zoom in and out behaviors
17. DI Overdubbing is the process of recording a performance in multiple passes merging the performances into a single region You ll experiment with recording multiple MIDI performances on top of an existing performance Try This Record over an existing MIDI region in Cycle mode Click the Set Locators button in the Arrange toolbar Cycle mode is turned on and the left and right locators match the start and end points of the MIDI region you recorded in the previous section Left locator Right locator F REC Arrange Track 7 Region v MIDI Audio View 7 Drag Overlap z k i Ga Pl Press the Return key while Logic Pro is not playing The playhead moves to the project start position Press the Asterisk or R key to start recording Recording begins after the predefined count in Use your MIDI keyboard or the Logic Pro Caps Lock Keyboard to play some notes Record as many cycle passes as you wish Press the Space bar to stop recording Chapter 5 Recording MIDI The end result is a single MIDI region that contains the merged performances from each cycle pass You can also overdub a MIDI recording when not in Cycle mode To do this 1 Control click the Record button in the Transport bar then choose Recording Settings from the shortcut menu 2 In the Recording pane choose Merge with selected regions from the Overlapping Recordings pop up menu 3 Repeat
18. DI Events Drag across a range of Piano Roll keys All note events in the pitch range are selected Drag across the Piano Roll keys to select all notes of multiple pitches Chapter 8 Editing MIDI Events 127 128 Creating Notes You ll use the Pencil tool to create note events in the Piano Roll Editor The Pencil tool is assigned to the Command click tool in the Piano Roll Editor by default Try This Create note events Hold down the Command key which triggers the Pencil tool then click a position in the Piano Roll Editor background Click with the Pencil tool to create a note event Hold down the Command key click an existing note event then click a position in the Piano Roll Editor background A new note event is created with the same channel velocity and length as the note event you clicked Chapter 8 Editing MIDI Events Editing the Position of Notes You can move selected note events by dragging them in the Piano Roll Editor If you move a note event horizontally it is moved in time If you move a note event vertically it is transposed moved up or down in pitch Try This Move note events Drag any note event horizontally Drag across multiple note events to select them then drag them to another position Copy note events Hold down the Option key then drag any note event horizontally only releasing the Option key after releasing the mouse button The note event is
19. Logic Pro 9 Apple Inc Copyright 2011 Apple Inc All rights reserved Your rights to the software are governed by the accompanying software license agreement The owner or authorized user of a valid copy of Logic Pro software may reproduce this publication for the purpose of learning to use such software No part of this publication may be reproduced or transmitted for commercial purposes such as selling copies of this publication or for providing paid for support services The Apple logo is a trademark of Apple Inc registered in the U S and other countries Use of the keyboard Apple logo Shift Option K for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws Every effort has been made to ensure that the information in this manual is accurate Apple is not responsible for printing or clerical errors Because Apple frequently releases new versions and updates to its system software applications and Internet sites images shown in this book may be slightly different from what you see on your screen Apple 1 Infinite Loop Cupertino CA 95014 408 996 1010 www apple com Apple the Apple logo Logic and Ultrabeat are trademarks of Apple Inc registered in the U S and other countries Other company and product names mentioned herein are trademarks of their respective companies Mention of third party p
20. Recording and Comping Audio 77 78 Move an active comp to a new track Choose Move active Comp to New Track from the Take Folder pop up menu The active comp is moved to a new track which is created below the take folder track This comp is no longer available in the original take folder You might use this option when you are ready to commit to a comp but want to keep all other takes and comps archived in the original take folder Flatten a take folder Choose Flatten from the Take Folder pop up menu The take folder is replaced with multiple regions that represent the current comp selections All take region sections not used in the current comp are deleted Use this option when you want to discard all comps and takes other than the current comp You can also use the Flatten and Merge command in the Take Folder pop up menu to replace the take folder with a single region that represents the current comp selections Use this option when you are ready to fully commit to the comp and don t expect to make any further edits where the individual comp sections intersect Chapter 4 Recording and Comping Audio Key Concepts e Metronome Produces a click in the project s tempo that can be heard during recording or playback The click makes it easier to play in time with the project s tempo Count in Clicks heard before the start of a recording making it easier to get into the project s groove Input slot A panel on an audio chan
21. Try This Adjust individual plug in settings Adjust individual controls in any open plug in window e Click switches or buttons to turn the parameter on or off e Drag knobs vertically to adjust the parameter value e Drag slider handles to adjust the parameter value e Option click a parameter to reset it to the default value Save the new plug in settings Choose Save Setting As from the Settings menu type a name for the new setting then click Save A new entry with the name you entered is added to the Settings menu just above the list of presets Chapter 3 Working with Instruments and Effects Load a setting Choose a different setting from the list of presets at the bottom of the Settings menu Reload the setting you saved previously from the Settings menu Click the Next or Previous Setting button in the plug in header The next or previous setting from the list of presets is loaded P View Show Channel Strip Previous Setting button Bypass Next Setting button Click any occupied Instrument slot or Insert slot A white frame appears around the slot and the Library tab updates to display a list of settings preset patches for the chosen plug in Choose a different setting to load it for the selected plug in T 1 8 Dotted Pitch Shift T 1416 Dotted Pitch Shift T 1 16 Swing Resonate T Melodic Pattern 01 T Melodic Pattern 02 T Melodic Pattern 03 T Melodic Pattern 04 T Melodic Pattern
22. ack header of Track 1 Lead Vocal A The flex modes are listed in the pop up menu Y Global Tracks gt Marker J Lead Vocal 8 3 J Vocal Harmony Click the Flex Mode parameter in the Inspector s Track Parameter box The flex modes are listed in the pop up menu 110 Chapter 7 Flex Time Editing Creating and Moving Flex Markers in Flex View You use flex markers to manually alter the timing of audio material You can create single or multiple flex markers in an audio file enabling you to manipulate whole or partial areas of the material by moving these flex markers Getting Ready Define a cycle range for soloed playback and set an appropriate zoom level Click the Solo S button on Track 1 Lead Vocal A to solo the entire track Click the gray shaded area in the upper part of the Bar ruler to turn on Cycle mode then double click the left and right locators in the Transport bar and enter 61 1 1 1 and 63 1 1 1 respectively Track y Region MIDI v Audio v p 04 1 Verse 2 Lead Vocal A 4 Chapter 7 Flex Time Editing 111 3 Hold down the Option and Control keys which triggers the Zoom tool then drag across the audio region Lead Vocal A 4 on Track 1 Lead Vocal A dragging between bars 61 and 63 only 112 Chapter 7 Flex Time Editing Try This Create and drag a single flex marker 1 Click the Flex Mode button in the track header of Track 1 Lead Vocal A then choose Monoph
23. ad to a position where you want to divide a region select the region then choose Region gt Split gt Split Regions by Playhead in the local menu bar The region is divided at the playhead position Divide a region using a marquee selection Hold down the Command key which triggers the Command click tool with the Marquee tool currently assigned while dragging across a region Click the marquee selection area with the Pointer tool to cut the region at the marquee borders Try pressing the M key on your computer keyboard instead of clicking the marquee selection area as described in the previous task In addition to the region being divided the region that was inside the boundaries of the marquee selection is muted Chapter 6 Creating an Arrangement 97 Merging Regions You can merge two or more selected regions of the same type audio or MIDI into a single region making region handling much easier in your arrangement Try This Merge audio regions Choose the Glue tool from the Left click Tool menu drag to select multiple audio regions then click one of them When Logic Pro provides you with the warning that a new audio file will be created click Continue The selected audio regions become one audio region with silence added for any gaps between A new audio file is added to the Bin Merge MIDI regions Drag to select multiple MIDI regions then click one of them The selected MIDI regions become one MIDI region with silen
24. annel strip types e Audio channel strips Allow you to control the playback and recording of audio signals on audio tracks e Instrument channel strips Allow you to use and control software instruments Software instrument plug ins are inserted into the channel strip s Instrument slot The instrument channel strip can then be driven by a recorded MIDI region or by direct MIDI input playing your MIDI keyboard e Aux channel strips Used to set up send returns where a channel strip signal is routed to an aux channel strip for effects processing Aux channel strips are also used for grouping purposes and for distributing a signal to multiple destinations via sends e Output channel strips Represent the physical audio outputs of your audio interface These channel strips are used to adjust the overall volume and stereo pan balance of all audio instrument or aux channel strips routed into them e Master channel strip A global level control for all output channel strips It changes the gain of output channel strips without affecting the level relationships between them 139 140 Exploring the Mixer The Mixer provides options for changing what channel strips are being viewed and in what order The default settings display all the channel strips in the order they appear in the Arrange area along with the aux and output channel strips they are sending signals to ee buttons Filter buttons Chapter 9 Mixing the Project
25. annel strip where you insert an instrument plug in Insert slot A panel on a channel strip where you insert an effect plug in Bar ruler Ruler at the top of the Arrange area It displays musical time units including bars measures beats and beat divisions Playhead A vertical white line that indicates the current playback position in all horizontal time based windows Left and right locators Define the start and end points of a cycle range in the Bar ruler e Cycle function A function that constantly repeats the area between the left and right locator positions Chapter 2 Building a Basic Project e Apple Loops Prerecorded audio and MIDI based files located in the Loop Browser e Channel strip A virtual representation of a mixing console channel strip Contains Mute and Solo buttons Volume fader Pan Balance control Insert slots and more e Audio channel strip Allows you to control the playback and recording of audio signals on an audio track e Instrument channel strip Allows you to use and control software instruments Software instrument plug ins are inserted into the channel strip s Instrument slot The instrument channel strip can then be driven by a recorded MIDI region or by direct MIDI input playing your MIDI keyboard Chapter 2 Building a Basic Project 43 Working with Instruments and Effects Logic Pro provides a number of ways to add instruments and effects to your channel strips Channel strips
26. are 2 5 Double click the EQ area on the aux channel strip to apply EQ 6 Click the first Send slot of the aux channel strip then choose Bus gt Bus 5 DrumVerb The audio for both snares is sent to the existing Aux 20 channel strip already set up for snare 150 Chapter 9 Mixing the Project Key Concepts e Mixer Interface area where you mix your project e Audio channel strips Allow you to control the playback and recording of audio signals on an audio track e Instrument channel strips Allow you to use and control software instruments Software instrument plug ins are inserted into the channel strip s Instrument slot e Aux channel strips Used to set up send returns where a channel strip signal is routed to an aux channel strip for effects processing Aux channel strips are also used for grouping purposes and for distributing a signal to multiple destinations via sends e Output channel strips Represent the physical audio outputs of your audio interface e Master channel strip A global level control for all output channel strips e Mixer View buttons Allow you to switch the Mixer between the Single Arrange and All views limiting the Mixer view to channel strips required for the task at hand e Mixer Filter buttons Allow you to to filter the display of specific channel strip types e Group slot Used to control a channel strip s group assignment e Group Settings window Used to define the behavior of each grou
27. ated only in the case of an unused Bus assignment 4 Double click any of the three Output slots to jump directly to Aux 3 5 You now have a submix of the selected three channel strips You can control this submix by modifying the volume level and pan settings and loading additional effects from Aux 3 Routing Signals with a Multi Output Instrument Some software instruments allow you to isolate a sound and route it to its own aux channel strip where it can be independently mixed and processed Within Logic Pro you can use Ultrabeat and the EXS 24 sampler for such purposes Getting Ready Select channel strip 8 in the Mixer then click the Single button You are provided with an immediate overview of channel strip 8 and its signal flow Chapter 9 Mixing the Project Try This Insert and set up a multi output instrument 1 Click the Instrument slot of channel strip 8 and make sure that Ultrabeat gt Multi Output is chosen 2 Click the Add button at the bottom of the channel strip Instrument slot with Ultrabeat loaded Input slot set to UB 3 4 Stereo Out Master Add button An aux channel strip is created with its Input slot set to UB 3 4 3 Double click the Instrument slot of channel strip 8 The Ultrabeat plug in window opens Chapter9 Mixing the Project 149 4 Click the out column of the 80 s Snare entry in the plug in window then choose 3 4 Do the same thing for the voice named 80 s Sn
28. atten and Merge Export active Take to New Track Move active Take to New Track Unpack Unpack to New Tracks Quick Swipe Comping i h an Chapter 4 Recording and Comping Audio 71 Try This Create a new comp With Take 1 Take 1 selected from the last task in the previous section place the pointer over the left edge of Take 2 and drag to the right to about the 4th beat of bar 30 in the space between the two waveforms The selected area on Take 1 is shortened accordingly Playing back the project plays Take 2 up to the word hand followed by the rest of Take 1 When you create a new comp it is automatically added to the Comp list in the Take Folder pop up menu Comp 2 in this case 72 Chapter 4 Recording and Comping Audio Save the comp Your current comp is always saved automatically whenever you perform an action that creates a new comp For example choose Duplicate Comp from the Take Folder pop up menu The current comp Comp 2 in this case is duplicated and the duplicate Comp 3 becomes the active comp for any further changes Edit the comp Place the pointer at the 2nd beat of bar 32 of the grayed out area of Take 2 and drag to the right to the end of the take region Now the last two words of the phrase are being sung by Take 2 in your comp Chapter 4 Recording and Comping Audio 73 Switch take region selections between takes Click the area that is not selected at the b
29. ce added for any gaps between 98 Chapter 6 Creating an Arrangement Copying Regions You can copy regions or region portions This allows you to reuse entire regions or portions of them at other parts of your arrangement Getting Ready Set an appropriate zoom level Select Track 29 Analog Synth Bass then do one of the following e Hold down the Option and Control keys which triggers the Zoom tool then drag across the Analog Synth Bass audio region that appears at bar 45 e Click anywhere in the Arrange area background to deselect all regions on Track 29 Analog Synth Bass click the Analog Synth Bass audio region at bar 45 to select it then press the Z key to fit the selected region in the Arrange area Chapter 6 Creating an Arrangement 99 Try This Copy a region section by dragging Hold down the Command key to trigger the Marquee tool then drag to select the first beat of bar 49 49 111 to 49211 ck v Region v MIDI v Audio View v Snap Smart Drag No Overiap R 100 Chapter 6 Creating an Arrangement 2 Holding down the Option key drag the marquee selection area release the mouse button at bar 52 3 1 1 on the same track then release the Option key k v Region v MIDI v Audio View v Snap Smart Drag v py Regions Analog Synth Bass 3 D PF The marquee selection area is copied at bar 52 3 1 1 Copy a region using edit commands 1 Click the A
30. contain Insert slots which are used for inserting effects Effects are used to color or shape the tone of existing audio recordings software instruments and external audio sources in real time Instrument channel strips also feature an Instrument slot which is used for inserting instruments Instruments are used for real time playback in Logic Pro Insert slots Instrument slot instrument channel strips only 45 You can choose whether to insert effect and instrument plug ins on an individual basis directly on the channel strip s Insert and Instrument slots or to load channel strip settings You ll experiment with both methods in this chapter Adding Individual Instruments and Effects In this section you ll add instrument and effect plug ins directly on the channel strip Getting Ready Create a software instrument track and display the Inspector Do one of the following e If you are using an existing project click the Add button above the track list select the Software Instrument option in the New Tracks dialog then click Create e If you want to create a new project see Chapter 2 for details 2 If the Inspector is not visible click the Inspector button in the Arrange toolbar or press the key eee bitir 46 Chapter 3 Working with Instruments and Effects Try This Insert an instrument into a channel strip Click the Instrument slot on the left Arrange channel strip then choos
31. ctions with the Transport bar or Bar ruler e Transport bar e Bar ruler t P H Edit Track v Region v MIDI v Audio v View v Snap Smart Drag Overlap BIES Bar ruler gt Global Tracks ts 1 TT Steel String Aco Upright Jazz Bass Playhead indicates the current playback position The Transport bar and Bar ruler are closely tied to each other with several functions accessible in both These include the Play and Stop options turning on Cycle mode and setting the cycle length 24 Chapter 2 Building a Basic Project Try This Start and stop playback Click the Play button in the Transport bar or press the Space bar on your computer keyboard to start playback Stop button Play button Click the Stop button in the Transport bar or press the Space bar to stop playback Double click the lower part of the Bar ruler to start playback from the clicked position Another double click stops playback cto P H Edit v Track v Region v MIDI v Audio Snap Smar Drag Overlap Double click the lower part of the Bar ruler Chapter 2 Building a Basic Project 25 Move the playhead Click the lower part of the Bar ruler to move the playhead to the clicked position Drag the playhead to a new position Press the Return key when the project is not playing The playhead moves to the project start position a Click the Rewind or F
32. e any instrument from the plug in menu The plug in is loaded and the window opens Use your MIDI keyboard or the Logic Pro Caps Lock Keyboard see Chapter 2 to play some notes Instrument slot with instrument plug in loaded Chapter 3 Working with Instruments and Effects 47 Insert an effect into a channel strip Click the top Insert slot on the left Arrange channel strip then choose any effect from the plug in menu The plug in is loaded and the window opens Insert slot with effect plug in loaded 48 Chapter 3 Working with Instruments and Effects Insert an EQ into a channel strip Double click the EQ area at the top of the left Arrange channel strip A Channel EQ is automatically inserted into the first available Insert slot if the top one is already used which it would be if you ve followed the previous steps EQ area Insert slot with Channel EQ loaded You can also Option double click the EQ area to insert the Channel EQ as the first plug in moving all existing plug ins one slot down a Echano Detay osn Sends Replace a plug in Click hold any occupied Instrument slot or Insert slot then choose a different plug in from the menu that opens If a plug in window is already open it updates to reflect the new plug in Otherwise a new plug in window opens Chapter 3 Working with Instruments and Effects 49 Remove a plug in a Click hold any occupied Instrument slot or Inser
33. econd then choose Functions gt Note Events gt Note Force Legato selected selected The selected note event is lengthened up to the next selected note event 132 Chapter 8 Editing MIDI Events Muting Notes You ll use the Mute tool to mute selected note events in the Piano Roll Editor Getting Ready Choose the Mute tool from the Left click Tool menu in the Piano Roll Editor Mute tool Try This Mute note events Click any note event with the Mute tool The note is dimmed and can no longer be heard during playback Click with the Mute tool to mute the note event _ Smp caor ai Click the note event a second time with the Mute tool to unmute it Drag across multiple note events then click one of them with the Mute tool All notes in the selection are dimmed and no longer heard during playback Click one of the note events a second time with the Mute tool to unmute them all Chapter 8 Editing MIDI Events 133 Click any Piano Roll key with the Mute tool All note events of that particular pitch are muted Click the Piano Roll key a second time with the Mute tool to unmute them all Editing the Velocity of Notes You ll use the Velocity tool to edit note velocity in the Piano Roll Editor Both the color of the rectangle and the horizontal line through the beam indicate the velocity of the note event the force at which the note is played High velocity Low velocity 134 Chapter 8 Editing MIDI Ev
34. eginning of Take 1 The clicked area is selected and the same area in Take 2 is unselected Switch back to the saved comp Choose the comp you saved in an earlier task from the Take Folder pop up menu Comp 2 in this case The comp is reloaded along with the edits you made at that time 74 Chapter 4 Recording and Comping Audio Editing Take Regions What if you want to cut a take region into multiple sections or move these sections around or even delete them Next you will experiment with each of these tasks Getting Ready This section assumes that the Quick Swipe Comping mode is off allowing you to cut drag and delete take folder and take region elements Change the take folder s editing mode Deselect Quick Swipe Comping from the Take Folder pop up menu You can also click the icon in the upper right corner of the take folder so that it looks as follows Icon shows that Quick Take 2 Take 2 Swipe Comping mode is Take 1 Take 1 off Comp 1 Final Comp Comp 2 Comp 2 Comp 3 Comp 3 Duplicate Comp Rename Comp Delete Comp Delete all other Comps Flatten Flatten and Merge Export active Comp to New Track Move active Comp to New Track Unpack Unpack to New Tracks Quick Swipe Comping _ Chapter 4 Recording and Comping Audio 75 76 Try This Cut a take region Using Comp 2 from the previous section choose the Scissors tool from the Left click Tool menu then click Take 1 1 8t
35. end slot of the selected channel strips and Aux 2 an aux channel strip is automatically created only in the case of an unused Bus assignment Send slot A f o Send knob DE Sample Editor Piano Roll Hyper 4 Drag the Send knob on any of the selected channel strips 18 through 21 to set the amount of signal that you want to send to Aux 2 As you do so the send amount value is shown on the Send slot 5 Double click either Send slot to jump directly to Aux 2 6 Click the top empty Insert slot of Aux 2 then choose an effect from the pop up menu 7 Modify the volume level and pan settings for the signal on Aux 2 Chapter 9 Mixing the Project Creating a Submix Another useful mixing procedure is to submix multiple channel strips into one aux channel strip Like grouping this makes it easy to control multiple channel strips For this to work the complete signal from each channel strip needs to be routed to an aux channel strip via the channel strip Output slots j o Eei Output slot Chapter 9 Mixing the Project 147 148 Try This Create a submix Click the Arrange button in the Mixer Drag horizontally across channel strips 22 to 26 to select them Click the Output slot on any of these channel strips then choose Bus 21 from the Bus pop up menu for example The Bus number is assigned to the Output slot of all three channel strips and Aux 3 is automatically cre
36. ents Getting Ready Choose the Velocity tool from the Left click Tool menu in the Piano Roll Editor Velocity tool N Try This Change the velocity of note events Drag any note event downward with the Velocity tool A help tag indicates the velocity value of the note you clicked with this value decreasing as you drag downward The note color changes and the horizontal line inside the beam shortens Drag the same note event upward while watching the help tag the note color and the horizontal line Chapter 8 Editing MIDI Events 135 136 Quantizing Notes You use the Quantize pop up menu in the Piano Roll Editor to assign a quantization value to one or more selected note events You can also use the Quantize button to quantize selected events with the value chosen from the Quantize pop up menu Quantize pop up menu Quantize button Li t Functions v View v 1 192 Note Salahna 1 Resions Try This Correct the timing of note events Select one or more note events in the Piano Roll Editor then choose a quantization value from the Quantize pop up menu The selected note events map to the grid according to the chosen quantization value Select additional note events then click the Quantize button The selected note events map to the grid according to the previously chosen quantization value Chapter 8 Editing MIDI Events Key Concepts e MIDI region A container for MIDI events indiv
37. er your own or prerecorded Click the Bin tab to reveal an area that is used for project audio file and region management and conversion tasks Click the Loops tab to reveal an area that contains prerecorded loops for adding to your project Click the Library tab to reveal an area that is used to handle all settings files for channel strips effects and instruments Click the Browser tab to reveal an area that is used to browse select and manage all media types supported by Logic Pro Chapter 2 Building a Basic Project 15 Playing Instruments You use the Library to insert an instrument as well as its effects into a track s channel strip This allows you to play the instrument from the selected track Getting Ready Click the Library tab in the Media area if the Library is not open aT Try This Load an instrument plus its effects Navigate through the categories and subcategories in the Library then click any of the entries known as settings The chosen instrument and its effects are loaded to the selected track s channel strip in the Inspector Use your MIDI keyboard or the Logic Pro Caps Lock Keyboard to play some notes Chapter 2 Building a Basic Project Use the Caps Lock Keyboard to generate MIDI notes Press the Caps Lock key on your computer keyboard to reveal a virtual keyboard on the screen E Geeat See Whedbeadtadl CoC see Use your computer keys as follows to ge
38. ers with the Flex tool Drag the green cycle area in the Bar ruler one bar to the right so that the start and end points are now 62 1 1 1 and 64 1 1 1 respectively 2 Place the pointer over the audio region Lead Vocal A 4 on Track 1 Lead Vocal A about an 1 8th note past the start of bar 63 that is 63 1 3 1 You ll know that the pointer is on top of an existing transient marker when it looks as follows 3 Drag from the transient marker to the left as far as bar 63 The area will look as follows The audio material to the right of the dragged flex marker is time expanded up to the following flex marker The audio material to the left of the dragged flex marker is time compressed up to the previous flex marker Chapter 7 Flex Time Editing 19 4 Press the Space bar to listen to the result of this time stretching and compression Quantizing Audio If you re not happy with the timing of your performance you can use the Quantize feature to correct the timing of audio material to the nearest selected musical time value This feature is only available for audio tracks that have been enabled for Flex Time editing To quantize audio you use the Quantize pop up menu in the Inspector s Region Parameter box Click here to open the Quantize pop up menu 120 Chapter 7 Flex Time Editing Getting Ready Make sure that Track 1 Lead Vocal A is no longer soloed by turning off its Solo button 2 Click the green
39. evel 1 Open the Helena Beat demo project 2 Click the track Solo button for Track 1 Lead Vocal A 3 Click anywhere in the Arrange area background to deselect all regions on Track 1 Lead Vocal A then click the take folder Lead Vocal A 1 Final Comp at bar 29 to select it Y Global Tracks gt Marker Take folder 2 Lead Vocal 8 4 Click the Set Locators button in the Arrange toolbar to turn on Cycle mode 5 Do one of the following e Hold down the Option and Control keys which triggers the Zoom tool then drag across the take folder Lead Vocal A 1 Final Comp on Track 1 Lead Vocal A e Press the Z key to fit the selected region in the Arrange area Chapter 4 Recording and Comping Audio 67 Try This Open the take folder Double click the closed take folder Lead Vocal A 1 Final Comp on Track 1 Lead Vocal A The take folder opens displaying two takes Take 2 and Take 1 on individual lanes Take 2 is the most recent take Take folder Individual takes Listen to the current comp Press the Space bar to listen to the current comp selection which is made up of the portions of Take 1 and Take 2 that are highlighted This is the comp used for the released version of Helena Beat 68 Chapter 4 Recording and Comping Audio Choose a take region for playback Click the triangle in the upper right corner of the take folder then choose Take 2 Take 2 from the Take Folder pop up menu Click
40. ex Time editing functionality without having to turn on Flex view in the Arrange area e Quantization The process of correcting the timing of your material e Quantize pop up menu A menu in the Region Parameter box that allows you to set the value used for quantization 122 Chapter 7 Flex Time Editing Editing MIDI Events 8 You use the MIDI editors to edit the position length pitch and velocity of MIDI events in MIDI regions You can edit individual MIDI events by selecting a MIDI region in the Arrange area and opening one of the MIDI editors The editor you use depends on the type of editing you want to carry out In this chapter you ll explore some of the editors while also looking at the editing capabilities of the Piano Roll Editor in more depth Exploring the MIDI Editors In the Piano Roll Editor MIDI note events are represented by horizontal rectangles aligned on a grid of horizontal and vertical lines In the Score Editor they are represented by traditional music notation Getting Ready Open the Helena Beat demo project 123 Try This Select a MIDI region and open the Piano Roll Editor Select the first MIDI region on Track 27 LoFi Lead and click the Piano Roll button at the bottom of the Arrange area or press the P key The MIDI events are represented by horizontal rectangles e The horizontal placement of note events indicates their temporal bar beat and sub beat posit
41. fine the start and end points of a cycle range in the Bar ruler e Playhead A vertical white line that indicates the current playback position in all horizontal time based Logic Pro windows Solo mode A mode in which you can select one or more tracks or regions to hear them in isolation e Marquee tool Used to select and edit parts of regions e Mute tool Used to stop a region or region section from playing e Glue tool Used to merge regions e Scissors tool Used to divide a region 106 Chapter 6 Creating an Arrangement Flex Time Editing 7 You can use Flex Time editing functions to edit the timing of single or multiple audio regions This chapter introduces you to the techniques used for Flex Time editing as well as the track based settings that detemine how the timing of your audio will be altered You ll learn how to correct a single note or the timing of an entire region all within the Arrange window Flex Time editing greatly simplifies the process required for altering the timing of audio material It allows you to compress or stretch the time between specified points in an audio region without the need for more traditional processes like cutting nudging and crossfading Though comparable to what is sometimes referred to as elastic audio in other applications Flex Time editing provides unique advantages such as the option to employ beat slicing methods that do not rely on time stretching algorithms Flex Time edi
42. h of a note beyond bar 32 The take is cut at the clicked position giving you two separate take regions on the same lane Drag a take region Press the Esc key twice to make the Pointer tool active then drag the take region the one you cut in the previous task one bar earlier 1 8th of a note beyond bar 31 Listen to the playback The phrase and you re dead again has been moved one bar earlier Copy a take region Holding down the Option key drag the take region the one you dragged in the previous task back to its original position then release the Option key Listen to the playback The phrase and you re dead again repeats itself Chapter 4 Recording and Comping Audio Managing Take Folder Contents In this section you ll experiment with some commands in the Take Folder pop up menu that can help with take folder management Try This Export an active comp to a new track Using the current comp in the take folder choose Export active Comp to New Track from the Take Folder pop up menu The active comp is copied to a new track which is created below the take folder track The content of the original take folder remains intact Crossfades Crossfades used to create a smooth transition between two adjacent audio regions on a track are visible between the take regions of the exported comp Using this command allows you to edit the current comp in the same way as other audio regions Chapter 4
43. here to open the Take Folder pop up menu The chosen take is displayed in color the color is also reflected in the take folder and the take that is not selected is displayed in gray Chapter 4 Recording and Comping Audio 69 70 Choose Take 1 Take 1 from the Take Folder pop up menu Again the chosen take is displayed in color the color is also reflected in the take folder and the take that is not selected is displayed in gray Creating and Editing Comps You can select individual take regions for playback in your project But what if you want to combine selected parts of each take region for playback the first section of Take 2 followed by the end section of Take 1 for example This section shows you how Chapter 4 Recording and Comping Audio Getting Ready You can switch take folders between two different editing modes with the active editing mode determining the types of edits that can be made in the take folder This section assumes that the Quick Swipe Comping mode is on allowing you to create and edit comps Verify the take folder s editing mode Make sure that Quick Swipe Comping is active in the Take Folder pop up menu You can also click the icon in the upper right corner of the take folder so that it looks as follows I Icon shows that Quick Take 2 Take 2 Swipe Comping mode is v Take 1 Take 1 on Comp 1 Final Comp Create New Comp Rename Take Delete Take Flatten Fl
44. idual MIDI notes or commands that are generally created with a MIDI keyboard e MIDI event Represents an individual MIDI note or command e Piano Roll Editor The area where MIDI note events are represented by horizontal rectangles aligned on a grid of horizontal and vertical lines e Score Editor The area where MIDI note events are displayed as traditional music notation e Velocity Defines the force at which a note is played e Transposition The process of moving a note event up or down in pitch e Cycle function A function that constantly repeats the area between the left and right locator positions e Left and right locators Define the start and end points of a cycle range in the Bar ruler e Quantization The process of correcting the timing of your material e Quantize pop up menu A pop up menu in the Piano Roll Editor that you use to move MIDI notes to the nearest selected musical time value e Quantize button A button in the Piano Roll Editor that allows you to move MIDI notes to the musical time value chosen in the Quantize pop up menu Chapter 8 Editing MIDI Events 137 Mixing the Project You use the Mixer when you want to refine the sound of each musical element in your project creating a unified mix In this chapter you ll explore the Mixer work with channel strip groups work with send effects and create submixes When working on each of these tasks in the Mixer you ll encounter the following ch
45. ime making it easier to find the most suitable tempo for your project Chapter 2 Building a Basic Project Exploring the Audio Bin The Audio Bin can be viewed as an audio file catalog for your project Once an audio file has been added to your project it appears in the Bin Getting Ready Open the Bin Click the Bin tab at the top of the Media area or press the B key The two Apple Loops audio files you added to the audio track in the previous section appear in the Bin The Info column displays audio file and region information The horizontal bars indicate the overall audio file length The colored sections of these bars indicate the location and size of audio regions within the audio file Try This Import an audio file into the Bin In the Bin tab choose Audio File gt Add Audio File browse to a location where you ll find an audio file click the Add button then click the Done button The audio file is added to the Bin Add an audio file to the Arrange area Drag the audio file you just imported from the Bin into the Arrange area Chapter 2 Building a Basic Project 29 30 Choosing Tools Key to selecting and altering audio and MIDI regions in the Arrange area are the tools You change the currently active tool by choosing the appropriate Tool menu item The pointer adopts the shape of the selected tool making it easy to recognize In this section you ll assign tools that can be accessed via left clicking or
46. ing over an existing region Note Make sure that the Replace button in the Transport bar is turned off Replace button Getting Ready Create a cycle based on an existing region Select the audio region that you recorded in the previous section and click the Set Locators button in the Arrange toolbar Cycle mode is turned on with the left and right locators set to match the audio region start and end points Left locator Right locator FR REC Arrange E amp z Repeat Section Crop Split by Track Region MIDI Audio View v Drag overa e Chapter 4 Recording and Comping Audio 65 Try This Record multiple audio takes Press the Return key The playhead moves to the project start position 2 Press the Asterisk or R key to start recording Recording begins after the predefined count in 3 Play your instrument and record as many cycle passes as you wish 4 Press the Space bar to stop recording The selected audio track contains a take folder with multiple take regions inside 66 Chapter 4 Recording and Comping Audio Exploring Take Folders In this section you ll look at how to open take folders and how to choose individual takes for playback in your project You ll also listen to an original comp the best parts from several take recordings combined into one master take in the demo project Getting Ready Open the demo project and set an appropriate zoom l
47. ioning within the region and project e The vertical placement of note events indicates their pitch the higher the note position in the Piano Roll area the higher the pitch e The length of the rectangle is directly proportional to the note event length 124 Chapter 8 Editing MIDI Events e The color of the rectangle and the horizontal line through the beam indicate the velocity of the note event how loud the note is played Open the Score Editor Click the Score button at the bottom of the Arrange area or press the N key The note events of the selected MIDI region are displayed as traditional notation in the Score Editor Chapter 8 Editing MIDI Events 125 Selecting Notes You ll use the Pointer tool to select note events in the Piano Roll Editor Getting Ready Open the Piano Roll Editor by pressing the P key Try This Select note events Click any note event in the Piano Roll area The note event is selected and is played back at the same time Click the Piano Roll background then drag across several note events Select note events of the same pitch Click one of the Piano Roll keys at the left of the Piano Roll area All notes of the same pitch are selected while also being played back Sample Editor PianoRoll score Hyper Editor Click a Piano Roll key to select all notes of the same pitch 126 Chapter 8 Editing MI
48. k 22 PolySix A is displayed along with some existing volume automation data Track automation lane Volume automation data 154 Chapter 10 Automating Your Mix Set the automation mode for a track 1 If you cannot see the Automation Mode button in the track header of Track 22 PolySix A drag the lower left corner of the track header downward Automation Mode button Drag here to zoom This zooms the track header area allowing you to see the Automation Mode button Read mode already chosen allows you to play back all automation that exists on the track 2 Click the Set Locators button in the Arrange toolbar 3 Click the Play button in the Transport bar or press the Space bar to start playback Orme l 4 Chapter 10 Automating Your Mix 155 Watch how the Volume fader in the left Arrange channel strip changes during playback The Volume fader follows the prerecorded automation data on the track Switch between automation parameters 1 Select Track 22 PolySix A The automation lane on Track 22 PolySix A is displayed along with some existing volume automation data 2 Click the Automation Parameter button then choose Pan from the pop up menu Automation Parameter button Pan automation data is shown on Track 22 PolySix A 156 Chapter 10 Automating Your Mix Using Touch and Latch Modes You can use Touch and Latch modes to create your own automation data Important Don t use
49. k in Logic Pro e Channel strip setting Represents the routing of a channel strip including all inserted effects or instruments plus their settings e Library tab Tab within the Media area that is used to handle all setting files for channel strips effects and instruments e EQ Short for equalizer Equalizers are used to boost or cut frequencies in an audio signal 58 Chapter 3 Working with Instruments and Effects Recording and Comping Audio You can record and comp audio directly in the Arrange area In this chapter you ll try out some basic audio recording techniques and experiment with take folder editing and comping Setting the Metronome and Count in As preparation for recording you should check the metronome and count in settings e Metronome Produces a click in the project s tempo that can be heard during recording or playback The click makes it easier to play in time with the tempo e Count in Clicks heard before the start of a recording making it easier to get into the project s groove Try This Set the metronome Control click the Metronome button in the Transport bar then choose Metronome Settings from the shortcut menu Metronome button 59 2 In the Metronome pane define when you want to hear the metronome click on every bar beat or division by selecting the corresponding checkboxes 3 Select the Click while recording and Only during count in checkboxes This a
50. l strip Mute button is also activated Drag over the Mute buttons of several tracks They are all activated in one swipe Command click a track Mute button The mute state of all Mute buttons is changed Solo and unsolo channel strips and tracks Repeat the first two tasks above but this time use the channel strip Solo S button and the track Solo button or press Control S Drag over the Solo buttons of several tracks They are all activated in one swipe Option click an active track Solo button The solo state of all active Solo buttons is cleared Adjust the volume level of a channel strip Drag the channel strip s Volume fader up or down Option click the Volume fader The Volume fader is reset to the default value Adjust the pan or balance of a channel strip Drag the Pan Balance knob vertically or horizontally Option click the Pan Balance knob The Pan Balance knob is reset to the default value Open an existing plug in Double click any used Insert slot or Instrument slot on the channel strip The plug in window of the inserted effect opens Chapter 2 Building a Basic Project Exporting the Project To share your music project you can export it in various audio file formats such as MP3 or AIFF You can also add it directly to your iTunes library This export process is known as bouncing Try This Bounce your mix 1 Click the Bounce button in the top right of the Arrange toolbar Chapter 2 Building a Basic Pr
51. lding a Basic Project Search field Category buttons L Green labels indicate software instrument Apple Loops files Blue labels indicate Apple Loops audio files Try This Preview Apple Loops Click any loop at the bottom of the tab to start playback A second click stops playback Repeat this for different loops Add a software instrument Apple Loops file 1 Click the Reset button in the Loops tab to reset any active category button selection 2 Click the Rock Blues category button locate Classic Rock Steel 01 then drag the loop onto the Inst 1 track aligning its start position at bar 1 A MIDI region is added to the track The MIDI region contains the original MIDI performance with its instrument and effect settings added to the track s channel strip Effects gt Global Tracks P t z pesmama sm MIDI region sening sening fo sers Inserts aa i 1ml 1o Cair Stereo Out l Instrument 20 Chapter 2 Building a Basic Project Search for a software instrument Apple Loops file 1 Click the Reset button type Woody Latin Bass 01 in the Search field then press the Return key The matching file is displayed in the file list Search field Search result 2 Drag Woody Latin Bass 01 into the empty Arrange area to start at bar 1 A new software instrument track is created with the loop added to it Chapter 2 Building a
52. llows you to hear a count in of 1 bar before recording begins If you want to change the default count in setting see the following task 60 Chapter 4 Recording and Comping Audio Change the count in Click the Recording button in the Project Settings window In the Recording pane choose an option from the Count in pop up menu You can record without a count in set a count in of a specific number of bars or set a count in time signature Chapter 4 Recording and Comping Audio 61 Making an Audio Recording When you make a single audio recording an audio region that displays a graphical overview of the waveform is created on the selected Arrange track Getting Ready Create a new audio track If you re using an existing project click the Add button above the track list select the Audio option in the New Tracks dialog then click Create gt Global Tracks If you want to create a new project see Chapter 2 for details 62 Chapter 4 Recording and Comping Audio Set up a channel strip s track for recording Click the Input slot of the left Arrange channel strip to choose the input for the connected instrument Insert slot Input slot Input Monitoring button a If you want you can add effects that fit your instrument to the channel strip For example if you want to record a guitar click the top Insert slot of the left Arrange channel strip then choose Amps and Pedals gt
53. ly created with a MIDI keyboard Arrange window The primary working window of Logic Pro It incorporates the most important working areas and editors including the Arrange area Arrange area The primary working space of Logic Pro It is used to record edit and arrange the audio and MIDI regions of a project Inspector Area at the left edge of the Arrange window and editors containing the parameter boxes and channel strips of the selected track Toolbar Area at the top of the Arrange window where you can access or hide certain onscreen areas or carry out key functions Chapter 2 Building a Basic Project 4 42 e Editors Areas below the Arrange area where you can edit audio and MIDI regions or mix your project Transport bar Area at the bottom of the Arrange window where you can control recording and playback functions Media area Area containing several tabs where you can access audio and MIDI files either your own or prerecorded Bin tab Tab within the Media area that is used for project audio file and region management and conversion tasks Loops tab Tab within the Media area that contains prerecorded loops for adding to your project Library tab Tab within the Media area that is used to handle all setting files for channel strips effects and instruments Browser tab Tab within the Media area that is used to browse select and manage all media types supported by Logic Pro Instrument slot A panel on a ch
54. nel strip where you assign the channel strip input Insert slot A panel on a channel strip where you insert an effect plug in Input Monitoring Allows you to hear incoming audio when audio tracks are playing record enabled or recording Take A recording Logic Pro allows you to create several takes one after the other without leaving record mode Take folder A container for multiple take recordings Cycle function A function that constantly repeats the area between the left and right locator positions Quick Swipe Comping The behavior of swiping across take sections to create and edit comps Drag editing The behavior of cutting dragging and moving take folder and take region elements Comp The result of combining selected parts of multiple takes into a single perfect take Chapter 4 Recording and Comping Audio 79 Recording MIDI You can use a MIDI keyboard to record MIDI in real time in Logic Pro This chapter focuses on recording options that are specific to recording MIDI in real time You ll learn how recording over the top of a previous performance can have different outcomes merging recordings replacing recordings or creating take folders depending on your recording setup You ll also experiment with quantization a process that allows you to correct the timing of MIDI notes Making a MIDI Recording MIDI recording is similar to audio recording You play your connected MIDI keyboard and Logic Pro rec
55. nerate MIDI notes e Use the numeric keys to define the octave for the MIDI keyboard e Use the top two rows of letter keys as counterparts for MIDI keyboard keys e Use the lowest row of letter keys to set MIDI note velocity e Use the Space bar for the Sustain function Chapter 2 Building a Basic Project 17 18 Adding Apple Loops You can start composing a song by dragging Apple Loops from the Loop Browser to the Arrange area Apple Loops are prerecorded musical phrases or riffs that are available in a variety of instruments genres and moods There are two types of Apple Loops Apple Loops audio files and software instrument Apple Loops files and you can add them to your project in the following ways e Add Apple Loops audio files to audio tracks The resulting audio region on the track contains the original audio recording e Add software instrument Apple Loops files to software instrument tracks The resulting MIDI region contains the original MIDI performance with its instrument and effect settings added to the track s channel strip e Add software instrument Apple Loops files to audio tracks The resulting audio region contains the original audio recording with the instrument and effect settings also rendered as audio Chapter 2 Building a Basic Project Getting Ready Open the Loop Browser Click the Loops tab in the Media area then click one of the category buttons Reset button View buttons Chapter 2 Bui
56. nge in the Bar ruler e Playhead Vertical white line that indicates the current playback position in all horizontal time based windows 93 Previewing the Demo Project You can t tackle the arrangement until you first get a feel for the content and structure of the song You ll preview the contents of the demo project using Solo mode a mode in which you can select one or more tracks or regions to hear them in isolation Getting Ready Open the demo project and turn on Solo mode 1 Open the Helena Beat demo project 2 Click the Solo button in the Transport bar or press the S key to turn on Solo mode Solo button The Bar ruler is shaded in yellow indicating that you are in Solo mode 94 Chapter 6 Creating an Arrangement Try This Preview different tracks and regions in the project Click the Play button in the Transport bar or press the Space bar to start playback Play button During playback click individual track headers or use the Up Arrow and Down Arrow keys to hear the entire track play back in Solo mode Click individual regions to hear them play back in Solo mode Drag across several regions to hear the region selection play back in Solo mode Drag across all the horn regions for example When finished press the S key to turn off Solo mode Mute a region During playback select the Mute tool then click any region A second click unmutes the region Select a region then press the M key P
57. nnel Strip Groups You can create a channel strip group and modify selected parameters for the entire group using a single control You do this by selecting multiple channel strips and assigning them to a particular group from the channel strip s Group slot Group slot Pan control Volume fader Try This Create a group from multiple channel strips 1 Drag horizontally across channel strips 3 to 5 over the word Inserts or I O text for example to select them 2 Click the Group slot of any one of these three channel strips then choose Group 3 from the pop up menu The group number is assigned to the channel strip Group slots and the Group Settings window opens automatically The Group Settings window determines which controls and parameters are synced for those channel strips that make up the group Chapter 9 Mixing the Project gooo pooo Of A 3 Double click the Name field type Backing Vocals then press the Return key The group name is added to the group number on the channel strip Group slots The selected channel strips are all assigned to Group 3 Backing Vocals Chapter 9 Mixing the Project 143 144 Add another channel strip to the last created group Option click the Group slot of channel strip 6 another background vocal channel strip The channel strip is added to the previously created Group 3 Backing Vocals Change the settings of an active group In the Group Settings wind
58. oject 39 2 In the Bounce dialog choose your settings for MP3 file creation Note If the cycle is active only the project section spanned by the cycle area is exported You can change this by editing the Start and End fields in the Bounce dialog 3 Select the Add to iTunes library checkbox to add the file to your iTunes library 4 Click the Bounce button The project section is bounced 40 Chapter 2 Building a Basic Project Key Concepts e Project A Logic document It contains all MIDI regions and references to the audio files to be played back A project file is saved within a project folder which can contain the project s audio files and other assets such as video and sample files Saving a project with assets simplifies archiving and exchanging projects but increases the project folder s size Audio track A lane in the Arrange area that is used for the playback recording and editing of audio regions Audio region A rectangular object that resides on an audio track It can be freely edited and its boundaries correspond to start and end points within the underlying audio file it is associated with Software instrument track A lane in the Arrange area that is used for the playback recording and editing of MIDI regions which play internal software instruments MIDI region A rectangular object that resides on a software instrument track It contains MIDI events individual notes or commands that are general
59. on Borders to create two nodes at each end of the region Edit automation nodes and lines Drag any of the existing automation nodes or lines vertically or horizontally Chapter 10 Automating Your Mix Draw in automation Draw automation lines and curves in the automation track with the Pencil tool Draw in automation data Vol 4 5 dB s with the Pencil tool Chapter 10 Automating Your Mix 161 Key Concepts e Automation The ability to record edit and play back the movements of all knobs controls and buttons on channel strips and plug ins e Track automation Automation displayed on an automation track e Automation Mode button A track header button on automation tracks that determines whether you read touch latch or write automation data e Automation Parameter button A track header button on automation tracks that allows you to choose the visible automation parameter on the track automation lane e Read mode Automates the current track using the existing automation data e Touch mode Allows you to modify the value of the chosen automation parameter when automation is active After releasing the fader or knob the parameter follows existing automation data on the track e Latch mode Works like Touch mode but the current value replaces any existing automation data after you release the fader or knob 162 Chapter 10 Automating Your Mix Getting Answers There are additional resources you can use to get ans
60. onic from the pop up menu Each audio file on the track is analyzed for transients Any detected transients are displayed as thin gray lines and stored in the audio file Transient marker 2 Press the Space bar to start playback Chapter 7 Flex Time Editing 13 3 Place the pointer over the upper half of the audio region just before bar 61 3 just on top of the existing transient marker The pointer shown here indicates an existing transient marker Transient marker detected Flex marker 114 Chapter 7 Flex Time Editing 5 Drag the flex marker to the right as far as bar 61 4 1 1 keep an eye on the Transport bar while moving the flex marker The result should look as follows Fae expanded audio Time compressed audio The audio material to the left of the flex marker is time expanded indicated by the orange color and the audio material to the right is time compressed indicated by green 6 Listen to the result of this time stretching and compression You ll notice that everything to the right of the edit now sounds completely out of time with the rest of the song Chapter 7 Flex Time Editing 15 Create and drag multiple flex markers Place the pointer over the lower half of the audio region after bar 62 2 1 1 just on top of the existing transient marker The pointer shown here indicates an existing transient marker Transient marker detected 2 Click the transient marker
61. ons are also resized in length Track v Region MIDI Audio y View art 3 Drag 0 Woody Latin Bass OL Woody Latin Bass 01 i oOo Resize pointer Live Ed Chapter 2 Building a Basic Project 35 Exploring a Track s Channel Strip A track s content is played back through a channel strip e Audio channel strips allow you to control the playback and recording of audio signals on audio tracks e Instrument channel strips allow you to use and control software instruments Software instrument plug ins are inserted into the channel strip s Instrument slot The instrument channel strip can then be driven by a recorded MIDI region or by direct MIDI input playing your MIDI keyboard You ll explore some of the channel strip controls that are used when playing back a track s content through a channel strip 36 Chapter 2 Building a Basic Project Getting Ready Display a track s channel strip Select any software instrument track in the Arrange area and make sure the Inspector is open by clicking the Inspector button or pressing the key Insert slot Instrument slot instrument channel strips only Pan Balance knob Volume fader Mute button Solo button Chapter 2 Building a Basic Project 37 38 Try This Mute and unmute channel strips and tracks Click the channel strip Mute M button The track Mute button is also activated Click the track Mute button or press Control M The channe
62. ords the incoming MIDI events on the record enabled MIDI or software instrument track In this chapter you ll only record to a software instrument track Information about MIDI tracks can be found in the Logic Pro User Manual For details about setting the metronome and count in prior to recording see Chapter 4 81 Getting Ready Create a new software instrument track and load a channel strip setting Create a new track by doing one of the following e If you are using an existing project click the Add button above the track list select the Software Instrument option in the New Tracks dialog then click Create e If you want to create a new project see Chapter 2 for details 2 In the Library tab Media area choose a channel strip setting that you will experiment with while recording Instrument and effect settings are loaded to the Instrument and Insert slots on the left Arrange channel strip 3 Make sure that your MIDI keyboard is connected 82 Chapter 5 Recording MIDI Try This Record a software instrument part Click the Record button in the Transport bar to start recording You can also press the Asterisk key on keyboards with a numeric keypad or the R key on other keyboards Recording begins after the predefined count in 2 Use your MIDI keyboard or the Logic Pro Caps Lock Keyboard see Chapter 2 to play some notes A MIDI region appears on the software instrument track 3 Click the Stop button
63. orward button in the Transport bar during playback Rewind button Forward button With each click the playhead either jumps back to the previous bar Rewind or ahead to the next bar Forward 26 Chapter 2 Building a Basic Project Loop playback of a project section 1 Click the shaded gray cycle area in the top part of the Bar ruler dica oati LE IN HL aeti iij aiit un ebay ince t P ae H _ Edit v Track v Region MIDI v Audio View Snap Smat Drag Overa RL Click here to activate the cycle The cycle range is activated between the left and right locator positions Left locator Right locator 2 Drag the left or right locator in the Bar ruler to extend or shorten the cycle range 3 Press the Space bar to start playback The playhead continually loops playback within the cycle range Chapter 2 Building a Basic Project 27 28 Setting the Project Tempo New projects default to a project tempo of 120 beats per minute bpm or to the native tempo of the first Apple Loops file added When you add subsequent Apple Loops they automatically play at the project tempo You can adjust the tempo to suit the style or mood of your music Tempo display Try This Set the project tempo Press the Space bar to start playback of the project Drag the Tempo display vertically upward for a faster tempo or downward for a slower tempo The project tempo changes in real t
64. osure triangle to the left of MIDI Thru at the top of the Inspector This shows or hides the area where you set parameters for the selected region in the Arrange area Click the disclosure triangle to the left of EVP88 Electric Piano at the top of the Inspector This shows or hides the area where you set parameters for the selected track in the Arrange area Get to know the toolbar Control click the toolbar then choose Customize Toolbar from the shortcut menu This dialog shows the full list of functions accessible from the toolbar You can access or hide certain onscreen areas such as the Media or Lists area or carry out key functions such as zooming the track and splitting regions Chapter 2 Building a Basic Project View the editors Click the Sample Editor Piano Roll and Score buttons at the bottom of the Arrange area Clicking these buttons shows or hides the editors where you edit audio and MIDI regions Click the Mixer button This shows or hides the area where you mix your project Get to know the Transport bar Control click the Transport bar then choose Customize Transport Bar from the shortcut menu This dialog shows the full list of functions accessible from the Transport bar You use the Transport bar to control recording and playback functions Explore the Media area Click the Media button at the top right of the Arrange window This shows or hides the Media area where you access audio and MIDI files eith
65. ow select the Solo checkbox Back in the Mixer click the Solo button on channel strip 3 All four channel strips in Group 3 Backing Vocals are soloed Modify the volume level for the group Drag the Volume fader of any channel strip in Group 3 Backing Vocals The Volume fader moves for each channel strip while maintaining the relative values between them Modify the Pan control for the group Drag the Pan control of any channel strip in Group 3 Backing Vocals vertically or horizontally The Pan control moves for each channel strip while maintaining the relative values between them Chapter 9 Mixing the Project Adding Effects to Multiple Channel Strips Chapter 3 discussed using Insert slots to add effects into a channel strip s signal flow But what if you want to use the same effect on more than one channel strip You do this using Send slots sending the signal on each channel strip to the same aux channel strip on which you add the effects j Insert slot Send slot Add an effect to multiple channel strips Make sure that instrument channel strips are visible in the Mixer area by activating the Inst filter button in the Mixer 2 Drag horizontally across channel strips 18 to 21 to select them 3 Click the top empty Send slot of any of the selected channel strips then choose Bus 1 from the Bus pop up menu for example Chapter 9 Mixing the Project 145 146 The Bus number is assigned to the S
66. p e Volume fader Used to set a channel strip s playback or monitoring volume e Pan control Used to control the position of the signal in the stereo image e Send slot Used to route a channel strip s signal to an aux channel strip e Output slot Used to set the channel strip s output path e Multi output instrument Allows you to isolate a sound and route it to its own aux channel strip where it can be independently mixed and processed Chapter 9 Mixing the Project 151 Automating Your Mix You can record edit and play back fully automated mixes in Logic Pro With the help of the Logic Pro automation features you can automate the controls and parameters of channel strips and plug ins by recording them and playing them back This allows you to create complex animated mixes with automatic channel strip mutes channel strip signals that pan from side to side channel strip groups fading in or out and much more In this chapter you ll explore how to automate the controls and parameters of channel strips using track automation 153 Exploring Track Automation Track automation is displayed on a transparent gray shaded area that runs the length of your project Getting Ready Open the demo project Open the Helena Beat demo project Try This Display track automation Select Track 22 PolySix A then choose View gt Track Automation in the local menu bar or press the A key The automation lane on Trac
67. ress the M key a second time to unmute the region Chapter 6 Creating an Arrangement 95 96 Dividing Regions You can slice any region into several parts thus creating several individual regions This allows you to move copy and delete parts of your arrangment Try This Divide a region Choose the Scissors tool from the Left click Tool menu then click any region at the required cut position You can also do this by dragging across the region with the Scissors tool This process known as scrubbing allows you to hear the audio at the playhead position making it easier to cut at the correct position Divide a region into multiple portions of equal length Hold down the Option key while cutting a region with the Scissors tool The selected region is cut into several pieces each the same length as the first segment Divide a region using locators 1 Drag the left or right locator in the Bar ruler to extend or shorten the cycle range Left locator Right locator Peter dica ati tutakua Kepeadi secuon fiop apii o v Audio H Edit Track Region MIDI FT o Verse 1 2 Select the region you want to split then choose Region gt Split gt Split Regions by Locators in the local menu bar Chapter 6 Creating an Arrangement The section of the region located between the locators is cut at the left and right locator positions Divide a region using the playhead Drag the playhe
68. roducts is for informational purposes only and constitutes neither an endorsement nor a recommendation Apple assumes no responsibility with regard to the performance or use of these products Demo project screenshots from Foster the People s Helena Beat provided courtesy of Sony Music Entertainment Foster the People Helena Beat 2010 2011 Sony Music Entertainment All rights reserved Contents 7 Chapter 1 Welcome to Logic Pro 13 16 24 28 29 30 33 36 39 4 Opening the Demo Project Using Key Commands Chapter 2 Building a Basic Project Creating a Project Exploring the Arrange Window Playing Instruments Adding Apple Loops Navigating the Project Setting the Project Tempo Exploring the Audio Bin Choosing Tools Creating a Basic Arrangement Exploring a Track s Channel Strip Exporting the Project Key Concepts 45 46 51 54 58 59 59 62 65 67 70 75 77 79 81 81 84 86 88 89 91 Chapter 3 Working with Instruments and Effects Adding Individual Instruments and Effects Working with Plug in Settings Loading Channel Strip Settings Key Concepts Chapter 4 Recording and Comping Audio Setting the Metronome and Count in Making an Audio Recording Recording Audio Takes Exploring Take Folders Creating and Editing Comps Editing Take Regions Managing Take Folder Contents Key Concepts Chapter 5 Recording MIDI Making a MIDI Recording Quantizing MIDI Overdub Recording MIDI
69. rrange area background to remove the previous marquee selection 2 Move the playhead to beat 52 4 1 1 3 Select the newly created region Analog Synth Bass 4 at bar 52 3 1 1 4 Choose Edit gt Copy or press Command C The region is copied Chapter 6 Creating an Arrangement 101 5 Choose Edit gt Paste or press Command V The region is pasted at beat 52 4 1 1 nw Regie MDI Ando 9 Mew Copy an entire region Hold down the Option key while dragging any region to another position only releasing the Option key after you release the mouse button 102 Chapter6 Creating an Arrangement Cropping Regions You can remove all parts of a region that fall outside the boundaries of a marquee selection Try This Select Track 30 Analog Sweeper Hold down the Command key to trigger the Marquee tool then drag to select the area between bars 48 4 1 1 and 52 1 3 1 ck v Region MIDI v Audio v View v Snap Smart Drag No Overap R Chapter 6 Creating an Arrangement 103 3 Press Control C which triggers the Crop Regions outside Locators or Marquee Selection key command The region parts that fall outside the boundaries of the marquee selection are cropped ck Region MIDI Audio v View v Snap Smart Drag NoOveriap R 104 Chapter 6 Creating an Arrangement Editing Arrange Sections You can remove an entire passage from your arrangement inse
70. rting it elsewhere in the song or you can repeat a section of your arrangement You ll explore these activities using the demo project Getting Ready Hold down the Option and Control keys which triggers the Zoom tool then click anywhere in the Arrange area background until the project returns to its original zoom level setting Try This Repeat a section of the project Drag the left and right locators of an active cycle range to select the section of the project you want to repeat then choose Region gt Cut Insert Time gt Repeat Section Between Locators in the local menu bar The entire section that falls within the locator positions is repeated Cut a section from the project Drag the left and right locators of an active cycle range to select the section of the project you want to remove then choose Region gt Cut Insert Time gt Snip Cut Section Between Locators in the local menu bar The entire section that falls within the locator positions is removed Insert a section in the project After cutting a section from your project move the playhead to the position where you want to insert it then choose Region gt Cut Insert Time gt Splice Insert Snipped Section at Playhead in the local menu bar The entire section is inserted at the playhead position Chapter 6 Creating an Arrangement 105 Key Concepts e Arranging The process of organizing your musical material into a song structure e Left and right locators De
71. shaded area in the upper part of the Bar ruler to turn off Cycle mode Press the Esc key twice to make the Pointer tool active Try This Apply quantization to a region Select the LoFi Drums 1 region on Track 15 LoFi Drums Click the Set Locators button in the Arrange toolbar then click the S button on the track to solo it Press the Z key to zoom to fit the selected region to the Arrange area Choose View gt Flex View Rhythmic flex mode is displayed in the track header s Flex Mode button Press the Space bar to start playback 6 During playback choose 1 8 Note from the Quantize pop up menu in the Inspector s Region Parameter box Listen to the playback result Chapter 7 Flex Time Editing 121 Key Concepts Flex Time editing A process that allows you to edit the timing of single or multiple audio regions e Flex mode A track based setting that detemines how the timing of your audio will be altered e Transient marker A marker that denotes a significant point or peak in an audio file Transient detection process A process that analyzes audio files for transients the first time you enable a track for Flex Time editing Detected transients are marked and stored in the audio files e Flex marker A marker that you drag to alter the timing of audio material e Flex view An Arrange area view that allows you to edit the timing of audio material e Flex tool A tool that allows you quick access to the basic Fl
72. similar to this Inspector button Media button FE My New Project Arrange d O ie 3 a 1 a OJAS Leet cs Be goa Toolbar EE j an g Iripecor Preferences Seinos AuloZoom Automation Fier Se Locators tees Secon Crop Soi by Maven Bounce aioe mouce Colors Noies HA E Library tab Taa v egon v Noi v Audo v Ven 7 Drag Overlap 3 wih Eg Goose 503 dna amp Pereussion i teyooaris E05 Syabesicers E6 Pop strings pe Curare 09 renes E10 word Ci 12 Logic Basics E13 Surround Ena ct opimis E targenana yrvyyyyyry yy Arrange area white frame indicates key focus area Editor buttons CELEO Inspector Transport bar Chapter 2 Building a Basic Project 13 Try This Explore the Inspector Click the Inspector button to hide or show the Inspector The Inspector shows parameters for the selected working area or editor For example if the Arrange area is active indicated by a white frame you can set region and track parameters Also shown are the channel strips that reference the selected track in the Arrange area Click the Score button at the bottom of the Arrange area The Inspector now shows parameters that are relevant to working in the Score Editor Click the Arrange area The Inspector again shows parameters and channel strips that are relevant to working in the Arrange area Click the discl
73. t slot then choose No Plug in from the menu that opens The plug in is removed from the slot leaving it empty Deactivate a plug in without removing it Option click the occupied Instrument slot or Insert slot The slot turns from blue to gray which indicates that the plug in is on the channel strip but is bypassed Setting Setting Bypassed plug in Double click the occupied Instrument slot or Insert slot then click the Bypass button at the left of the plug in window header x x PF View gt SA Pr View oh Bypass Bypass Indicates an Indicates a active plug in bypassed plug in 50 Chapter 3 Working with Instruments and Effects Working with Plug in Settings A plug in setting is a set of plug in parameter values that can be loaded saved copied or pasted via the Settings menu inst 1 7 Show Channel Sirip gt Show Insert gt TOF defaut Click here to access the Settings menu in the plug in header Plug in settings are stored with the project file and are automatically recalled the next time the project is loaded You can change these settings individually by adjusting individual parameters or by loading an entire setting for the plug in You can also save and recall any changes you make to plug in settings Getting Ready Open a plug in window if one is not already open a Double click any occupied Instrument slot or Insert slot Chapter 3 Working with Instruments and Effects 51 52
74. ting is largely dependent on a set of markers called transient markers which denote significant points in an audio file The audio on a track is analyzed for transients the first time you enable that track for Flex Time editing Any detected transients in the file are marked with transient markers 107 You edit the timing of audio material using flex markers When you move a flex marker it time compresses or expands the area around it The initial boundaries within which this is done is determined by the transient markers You manipulate flex markers either in the Arrange area s Flex view or invisibly using the Flex tool You can create single or multiple flex markers in an audio file enabling you to manipulate the position of single notes or complete phrases 108 Chapter 7 Flex Time Editing Exploring Flex View and Flex Modes You ll start by turning on Flex view in the Arrange area and exploring some of the available flex modes Getting Ready Open the Helena Beat demo project Track 1 Lead Vocal A is selected by default Try This Display Flex view in the Arrange area Choose View gt Flex View in the local menu bar Flex view is turned on and the Flex Mode button is displayed in the track header of Track 1 Lead Vocal A Flex Mode button Global Tracks gt Marker gt Lead Vocal A LE gt Chapter 7 Flex Time Editing 109 Locate the available flex modes a Click the Flex Mode button in the tr
75. tings Play some notes on your keyboard after each change of setting Load a channel strip setting in the Arrange channel strip Click hold the Setting button in the left Arrange channel strip navigate through the setting categories and subcategories and choose one Seventien Y Seventies Kitcst Next Channel Strip Setting ol Previous Channel Strip Setting Of Copy Channel Strip Setting CC Paste Channel Strip Setting CEV Reset Channel Strip Save Channel Strip Setting as f CARP PRLS ON PRPS The Setting button Insert slots and Instrument slot on the left Arrange channel strip are updated to reflect the channel strip setting and its effect and instrument plug ins 56 Chapter 3 Working with Instruments and Effects Select the previous or next channel strip setting Click hold the Setting button in the left Arrange channel strip then choose Previous Channel Strip Setting or Next Channel Strip Setting from the pop up menu The Setting button Insert slots and Instrument slot on the channel strip are updated to reflect the new setting Save and recall a channel strip setting Navigate through the categories and subcategories in the Library then click an entry The Setting button Insert slots and Instrument slot on the left Arrange channel strip are updated to reflect the channel strip setting and its effect and instrument plug ins Click the left Arrange channel strip s third Insert
76. u Each chapter of this book presents major features and guides you in trying things out Chapter 2 lets you build a basic project from scratch while the remaining chapters take you through the entire production process including recording arranging editing and mixing This guide assumes that you ve installed Logic Pro on your computer You should also connect the music equipment that you plan to use such as your MIDI keyboard audio interface musical instruments or microphone to your computer For full details see the Setting Up Your System chapter in the Logic Pro User Manual Open Logic Pro choose Help gt Logic Pro Help then click Logic Pro 9 User Manual 8 Opening the Demo Project While you can use your own projects to support the tasks in this guide many of the tasks from Chapter 4 onward reference the contents of Helena Beat the original multitrack version of this song from Foster the People s debut studio album Torches To open the Helena Beat demo project Open Logic Pro then choose Help gt Exploring Logic Pro Demo Project Using Key Commands You can execute nearly every Logic Pro function with a computer keyboard shortcut known as a key command This book includes references to those key commands that have default computer keyboard shortcuts using the U S and U S with Numeric Keypad keyboard presets You can use the Key Commands window to assign key commands to your computer ke
77. u ve now had a brief introduction to Logic Pro and a selection of its features You can continue to experiment with the demo project files on your own or delete them and start work with your own clips Refer to Logic Pro Help for the in depth information you need Chapter 11 Getting Answers
78. wers to your questions about using Logic Pro Now that you have learned about the basic features of Logic Pro you probably have more questions You can use Logic Pro Help to find the answers you need Exploring Logic Pro Help Logic Pro Help provides in depth descriptions about the features of Logic Pro and detailed instructions about the tasks you can perform Try This Open the Logic Pro User Manual In Logic Pro choose Help gt Logic Pro Help then click Logic Pro 9 User Manual Open the Logic Pro Instruments manual In Logic Pro choose Help gt Logic Pro Help then click Logic Pro 9 Instruments Open the Logic Pro Effects manual In Logic Pro choose Help gt Logic Pro Help then click Logic Pro 9 Effects 163 164 Search for a specific topic that interests you Enter the topic of your choice in the search field at the top of the Help Viewer window Select topics from the search results list that you want to know more about When you search in the Logic Pro User Manual the search results include relevant topics from the Logic Pro Instruments and Logic Pro Effects manuals as well Search for Apple Support information Choose Help gt Logic Pro Help then click Logic Pro Support Browse topics that interest you Read discussions on the Logic Pro forum Choose Help gt Logic Pro Help then click Logic Pro Discussions in the list of additional resources Browse discussion topics that interest you What s Next Yo
79. xisting region Getting Ready Modify the project setting for MIDI Overlapping Recordings 1 Control click the Record button in the Transport bar then choose Recording Settings from the shortcut menu 2 In the Recording pane choose Create take folders from the Overlapping Recordings pop up menu Chapter 5 Recording MIDI 89 90 Try This Record MIDI takes If you want to record in Cycle mode click the gray shaded area in the top part of the Bar ruler Press the Return key while Logic Pro is not playing The playhead moves to the project start position Press the Asterisk or R key to start recording Recording will begin after the predefined count in Use your MIDI keyboard or the Logic Pro Caps Lock Keyboard to play some notes Record a single pass or as many cycle passes as you wish Press the Space bar to stop recording The selected software instrument track contains a take folder with multiple takes inside Double click the closed take folder to view the contents click the take you want to hear then start playback Chapter 5 Recording MIDI Key Concepts Quantization The process of correcting the timing of MIDI note positions Quantize pop up menu A menu in the Region Parameter box that you use to move MIDI notes to the nearest selected musical time value e MIDI region A container for MIDI events individual MIDI notes or commands that are generally created with a MIDI keyboard
80. yboard allowing you to suit your own working style To open the Key Commands window Choose Logic Pro gt Preferences gt Key Commands in the main menu bar or press Option k Full details on the Key Commands window are found in the Logic Pro User Manual Chapter 1 Welcome to Logic Pro Building a Basic Project 2 This chapter gets you up and running with Logic Pro in the shortest possible time If you are new to digital music production you can use this chapter to learn how to use the basic features of Logic Pro to build a simple music project from scratch Creating a Project You ll start by opening Logic Pro and creating a new project then you ll save it Open Logic Pro and create a new project 1 Double click the Logic Pro icon in your Applications folder 2 Inthe Templates dialog that appears click the Empty Project button Empty Project button 3 In the New Tracks dialog select the Software Instrument option then click the Create button 10 Chapter 2 Building a Basic Project Understanding Tracks and Regions An audio track is a lane in the Arrange area that is used for the playback recording and editing of audio regions An audio region is a rectangular object that resides on an audio track It can be freely edited and its boundaries correspond to start and end points within the underlying audio file it is associated with A software instrument track is a lane in the Arrange area that is used for the

Exploring Logic Pro 9

Contents

Download Pdf Manuals

Related Search

Related Contents