USER MANUAL
Contents
1. Auto off An auto shut off feature is provided to conserve battery power The unit will automatically turn off after 90 seconds of inactivity Capacity 5000g x 1g Units g Ib oz PRECISION Auto OFF 90 sec 1g Scale dimension 170mm x 220mm x 20mm Tray dimension 170mm x 220mm Scale weight 515g LIFETIME Operating temperature Optimum 10 40 C 50 104 f Ef INTERNATIONAL WARRANTY LIFETIME 30 YEAR Power Source 3 x AAA Battery Tare range Up to scale s maximum capacity www myweigh com2. HISCALE Ww 5000g X 1g CAPACITY KITCHEN SCALE MyWWeight SS USERMANUAL SS Thank you for purchasing the My Weigh 1Scale digital scale Please read all operating instructions carefully before use This electronic scale is a precision instrument With normal care and proper treatment it will provide years of reliable service For more information please visit www myweigh com Never load the scale with more than the maximal capacity Although the 1Seale is designed to be extremely durable with extra overload protection built into the case overloading will permanently damage it Avoid any exposure to extreme heat or cold your scale works better when operated at normal room temperature Keep your scale in a clean environment Dust dirt moisture vibration air currents and or a close proximity to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale Handle with care Gently apply all items to be weighed onto tray top Avoid shaking dropping or otherwise shocking the scale Scales are delicate instruments and unlike cellular phones scales have delicate sensors that determine how much an item weighs If you drop or shock your scale these sensors feel the shock and are sometimes destroyed This happens with all digital scales We design our scales to be as resistant to shock or drops as possible however there is no way for us to protect 100 against load cell or sensor damage Failur
3. e to follow these instructions will void your warranty Always allow the scale to acclimate to normal room temperature for at least one hour before use Give your scale sufficient warm up time Usually 30 60 seconds before calibration to give the internal components a chance to stabilize OPERATING INSTRUCTIONS WEIGHING Place the scale on a flat hard surface Press and release the ON ZERO key Wait until the displays shows 0 Gently place the items to be weighed on the tray The weight will be displayed on the LCD Press UNIT to select the weighing mode g or b oz Press ON ZERO to deduct the weight of an item or container that is on the scale The reading is now 0 Turn the scale off by pressing the ON ZERO key and hold it for 3 seconds 1 2 3 4 5 6 7 8 BATTERIES Low Batteries amp bad battery connections are the 1 cause of scale malfunction and inaccuracy We test all of our scale returns from consumers and 60 of them are battery related problems This sounds silly but it s true A scale will perform poorly when it has low batteries Use good quality batteries amp replace them often Remove the batteries if you plan to store the scale for longer then 14 days We include good quality batteries with all of our scales but they can run low in storage If your scale simply won t turn on while on battery power it is often caused by loose battery connections Battery prongs terminals are made of meta
4. l and they have to be in contact with the batteries You can use a paperclip to slightly bend the battery prongs to have a better connection Some poorly designed batteries have recessed or partially obstructed battery terminals This may cause your prongs to be touching the plastic housing of the battery instead of the metal of the battery terminal Battery installation a Press and lift open the battery cover located at the bottom of the unit b Insert three AAA battery and make sure the polarity is correct c Close the battery cover until it clicks shut Note If the battery symbol appears in the display it means low battery power It is time to replace the battery If the power is too low it will show Lo when power on and then turn off automatically FEATURES Power Up Segment Test When first turning the unit on all segments of the display will appear This display will remain for approximately 3 seconds and then reset to zero Overload indicator When the display shows ERR this indicates an overload Remove excessive load immediately Remember you can permanently damage the scale and void your warranty by overloading it Low battery indicator If the display shows LO it indicates low batteries The battery needs to be replaced for the scale to function properly Negative Value Any tared value will be displayed as a negative number once all weight is removed press ON ZERO or cycle the power to re zero the scale
Download Pdf Manuals
Related Search