User Manual
Contents
1. press A v to change the CD read speed press ENT to select gt press A v to change the DVD read speed press ENT to select 11 11 Compare Speed This function allows you to set the speed for the compare function gt press ENT press A V to change the CD compare speed press ENT to select gt press A v to change the DVD compare speed press ENT to select 11 12 CHG Bad Master When enabled this option allows you to change the master disc at mid burn if an error is detect during the burn gt press ENT press A V to toggle between Enable and Disable press ENT to select 11 13 CD Overburn When enabled this option allows certain CDs that have been over burned during its creation to be copied gt press ENT press A V to toggle between Enable and Disable press ENT to select 11 14 Clear All Reset the operations back to manufacturer s default settings Clear Parameter To Default All Parameter Was cleared Image Manager 1 Select Image Select Image A001 DVD 4469M Image Manager 2 Disc gt Image Disc gt A001 10 446MB The source disc loaded to HDD as image file A001 Disc A001 Finished gt press ENT clear all settings made and return back to manu2. 3 Full Erase Full Erase Disc O Oo Utility 4 Eject All Disc Utility 5 Disc Info Utility 6 Drive Info 1 Port 8 0 3 38 DVD ROM Max 16 X Utility 7 System Info P762NDVD Utility 8 Update BIOS Upgrade BIOS Waiting Disc 1 26 10 3 Full Erase This operation will erase re writable discs in the Writer Tray It is timelier than Quick Erase function When finished the writer will automatically eject the trays Insert re writable disc and press ENT gt Erasing finished and eject discs 10 4 Eject All Discs Ejects disks including master source disc and discs in writer trays gt Press ENT Eject all discs 10 5 Disc Info This feature allows checking disc s basic information such as the disc type data length and available capacity gt press ENT 10 6 Drive Info This feature allows checking the duplicator s major component information such as its manufacturer Writer or Reader model number and version a Press ENT and then press up or down to check each Drive s model number and information b The duplicator will assign each drive a number from 1to 12 1 is Reader 2 12 are writers gt press ENT press Aj vlto select different Drives 10 7 System Info This feature provides information about the duplicator such as the controller model number RAM capacity and Firmware version gt press ENT press
3. and TAO The default mode is DAO which means Disc at Once 11 5 Button Beep Toggles on off whether you hear a beep as you press a button 11 6 Skip Read Error In the event of a reading error this function will simply continue the duplication process rather than halting the entire duplication process 137 Eject on Start Allows you to choose whether the duplicator system will eject the disc on startup 5 11 8 Boot Password Allows setting or changing the password at start up 11 9 Setup Password Allows setting or changing the password for Setup 10 Reader Speed Allows you to set the maximum read speed of the reader 1 Compare Allows you to set the maximum speed during the compare Speed function 2 CHG Bad This function allows the user to replace the master at mid burn if an Master error occurs from reading the master disc 13 CD Overburn Allows copying of certain CDs that have been over burned during its creation 14 Clear Setup Resets all settings back to manufacturer s default 12 IMAGE Contains various Hard Drive related operations If duplicator does MANAGER not have HDD installed the system menu will not show this function 12 1 Select Image Used to select an Image file as a Source to be copied to the discs 12 2 Disc gt Image Used to copy a Source Disc to HDD to save as an Image file 12 3 Reader Speed The following function 12 2 Dis
4. For example if your built in HDD is 40GB then the system will show the HDD available capacity gt 5GB 8 gt 40GB 1GB 40 e Note DVD is calculated by 5GB and CD is calculated by 1GB 3 Every time a source disc is loaded the duplicator will auto detect the disc capacity and assign correct partitions for it For example if you load a 4GB double layer DVD 20 disc into HDD as a disc image the system will automatically detect and assign 4 partitions for it 4 Dynamic calculated and display HDD capacity The duplicator will present built in HDD capacity information dynamically depending on your loaded source disc s capacity Before loading a 4GB DVD disc as source disc image the HDD information shows the HDD capacity that is available for loading 5 DVD or 26 CDs However after loading a 4GB DVD the system will re calculate the total available partitions and display how many DVD or CD discs you can load as disc image the next time gt Before load 4GB DVD HDD info Used 2 DVD 3CD Free 5 DVD 26 CD Note DVD indicates 5GB partition and CD indicate 1GB partition Used 3DVD 3CD gt After load 4GB DVD HDD info Free 4DVD 22 CD Smart Image File Management 1 When Discs are loaded into HDD as stored disc images the system will assign a file name to the image file beginning from A001 e Note Each time a new disc image is loaded the system will automatically search and assign the lowest number as the file
5. a Select 9 Track Edit and press ENT b Move to select 2 Close Disc and press ENT to start close disc process c When Close Disc is processing you will see o O blinking on the screen d When the process is done writer will automatically eject the disc and you will see on the screen DPress ENT Close finished and eject disc 9 3 Disc Info This feature allows you to check your disc status such as available capacity a Move to 9 Track Edit and press ENT b Select 3 Disc Info and press ENT gt Press ENT 10 UTILITY This function group includes several Disc related functions You can press ENT and press the up or down button to select the desired function 10 1 Pre scan This feature will check whether the Master Source Disc can be duplicated a Select Utility and press ENT b Select 1 Pre scan and press ENT gt Press ENT gt 100 10 2 Quick Erase This operation will erase re writable discs in the Writer Tray When it is finished erasing the tray will automatically eject The duplicator can erase different types of re writable discs simultaneously You can place the re writable disc you wish to erase in any tray insert re writable discs and press ENT DErasing done and eject discs e Note If you see O o blinking it means Erasing is in process If you see F f blinking it means DVD RW Disc Formatting is in process Utility
6. menu to see first when the duplicator is turned on gt press ENT press A V to select function 11 4 Write Method You can select which mode to duplicate CD from DAO Disc At once SAO Session At Once and TAO Track At Once The default mode is DAO gt press ENT press A V to select 11 5 Button Beep Choose whether to hear a beep when you press a button or not gt press ENT press A V to select ON OFF 11 6 Read Error Skip Choose to stop the duplicating process when error has occurred Skip Read Error ON Setup 7 Eiect On Start Eject On Start Eject All Setup 8 Boot Password Boot Password gt Disable Setup 8 Boot Password Boot Password gt Setup 9 Setup Password Setup Password gt Disable Setup 5 Boot Password Boot Password gt a gt press ENT press A V to select ON OFF 11 7 Eject on Start You can choose whether or not to eject the disc when powering up the system gt press ENT press A V to select Eject All No Eject Eject Target Eject Source 11 8 Boot Password You can setup the boot password to prevent anyone from using the system gt press ENT press A V to select Disable Enable If you select Disable you will go back to 8 Boot Passw
7. name For example if there are no deleted files the file name will be assigned in sequence beginning from A001 However if there is a deleted file such as A003 then the file name will be held The next time there is a new disc image stored the lowest number of A003 will be assigned as this new disc image s file name 2 You are allowed to delete an image file by executing 12 5 delete image Once an image file is deleted the name of the file will be left empty and held for a future loaded image file The existing file name will not be changed or moved ahead due to the deletion 3 Use 12 4 Image Info function to check image file information The image Image Info information will display the image file name Disc type and file size A001 DYD 3875MB gt 3 875GB DVD disc image file A001 Image Info gt CD disc image with 65 min 28 sec file A003 A003 CD 65 28 USB or USB FIREWIRE CONNECTION If your duplicator is equipped with a USB or USB Firewire external connector you can use your first CD DVD target drive as an external CD DVD burner to create your master from your computer 21 USB or USB Firewire connection can be enabled or disabled by the switch located on the back of the duplicator A USB A to B cable or Firewire Cable 6 pin connector is required to establish the connection between the computer and the duplicator USB only Red LED Power switch Green LED USB Red LED USB USB Firewir
8. 100 finished and Eject discs 5 Verify 7 discs detected 5 Verify 79 45 Loading Disc Verify 79 45 Analyze Disc Verify 79 45 45 35 45 6 Compare 7 discs detected Compare 79 45 Loading Disc Compare 79 45 Analyze Disc Compare 79 45 45 35 45 7 Set Burn Speed Burn Speed CD 52 The Compare Disc function serves as a bit by bit Comparison between Master Reading Source and the copied discs inside the writer trays This operation ensures that all of the copies are completely identical to the Master Reading Source 5 VERIFY This function will check the master disc and the copied discs readability to ensure that all of the copies are readable a Place master source disc and all copied discs into the duplicator Press ENT The duplicator will automatically start loading the disc analyze the source disc and start verification b When verification is complete the duplicator writer trays will automatically eject gt Press ENT to load discs gt Analyzing source disc gt Start verification gt 100 Finished and eject discs 6 COMPARE DISC Use this function to make a bit by bit Comparison between Master Reading Source and the copied discs inside the writer tray This operation is used to ensure all of the copies have the same information as the Master Reading Source a Put master source disc and all copied discs into the duplicator b Press ENT The duplic
9. A vlo select different Drives 10 8 Update BIOS When manufacturer s certified update CD is inserted this operation will automatically update your duplicator s software a Turn on the duplicator select 10 Utility and press ENT b Insert an update CD to any Drive __ C Select 8 Update BIOS and press ENT d The system will then start executing the firmware update When finished the updated CD will automatically eject e In 1 min the system will re boot The new firmware update is complete Dinsert update CD Start Update Writing 5 Start Update Pass New BIOS updated Restart System Utility 9 Copy Count Copy Count 1 Show Count ED PO FO DVD PO FO Copy Count 2 Enable Count 2 Enable Count gt No Copy Count 3 Clear Count gt gt gt Warning lt lt lt Clear All Counte Erasing Count Clear All Count Complete gt press ENT gt 100 Deject CD System re boot 10 9 Counter This function keeps count of the number of successful and failed disc copied a Turn on the duplicator select 10 Utility and press ENT b Select 9 Copy Count and press ENT gt press ENT to display the counter gt Shows the number of CD and DVD that passed and failed gt press ESC to return gt press ENT 5 Press A M to toggle between Yes and No gt press ENT to clear the current counter gt pr
10. DD Image is selected the HDD will automatically be set as the Reading Source If you wish to make Disc to Disc Copies you must go back to 8 Select Source to select the CD DVD ROM as the Reading Source 12 2 Disc gt Image This function shows you how to load the master source disc onto the Hard Drive and save it as an image file a Place Master Source Disc into any Drive b Select 12 2 Disc gt Image and press ENT gt press ENT gt 100 e Note The source disc can be placed in any Reader or any one of Writer Drive 12 3 Reader Speed Image Manager 3 Reader Speed Image Manager 4 Image Info Image Info A001 DVD 3875MB Image Info A001 CD 65 28 Image Manager 5 Rename Image 001 A001 DVD 4469MB Edit Image Name A00 Edit Name Change New Name OK A0O1 New Name Image Manager 6 Delete Image Delete Image A001 DVD 4469M Delete Image A003 DVD 4372M A003 DVD 4372M DELETE Complete When you wish to perform this function 12 2 Disc gt Image set the Reading Speed from the reading master source disc e Note this function is ONLY available when loading the Source Disc to an HDD 12 4 Image Info This function allows checking all image file information such as the Image file number Disc type and its file size gt press ENT 5D3 875GB DVD disc image file A001 5 CD disc image with 65 min 28 sec file name A003 12 5 Rename Imag
11. S This function allows you to synchronize the firmware version from the first tower to all the towers in the chain Note It requires a firmware CD that contains bin firmware file to work Contact the duplicator manufacturer to obtain the update file a Select 13 Link Setup and press ENT press b Select 4 Synchron BIOS and press ENT c Data will begin moving from the first tower to the subsequent towers 14 About HDD Manager Our duplicator uses rational and dynamic HDD management technology The traditional method of formatting an HDD requires you to choose the number of partitions designated for DVDs and CDs before formatting your hard drive The problem is that you might not be able to predict how many DVDs or CDs you will load onto your hard drive Many incomplete partitions can be created mainly with new DVD disks constantly coming out such as the double layer DVD You need an intelligent and more dynamic way to manage your HDD and our HDD manager can do that for you Our Dynamic HDD Manager consists of the following special features Auto Detect Disc Capacity and Dynamically Assign Partitions 1 When you first format the built in HDD our duplicator will automatically divide the HDD into 1GB partitions A DVD or CD partition does not have to be selected in the beginning 2 You can check HDD information in function 12 6 HDD Info The Hard Drive s capacity is presented in terms of how many DVD or CD discs you can load
12. a m Le ao TATS 5 M255 CD DVD Duplication System User Manual 5542 Brisa Street Suite F e Livermore CA 94550 Tel 925 447 8484 e Fax 925 447 8811 e www all pro sol com TABLE OF CONTENTS M255 CD DVD Duplicator Introduction Features Specification 8 Content of the box Installation amp Setup Guide Menu Overview Operation Guide 1 Copy Disc Test Copy Disc Copy amp Verify Copy amp Compare 2 3 4 5 Verify 6 Compare Disc 7 Select Burn Speed 8 Select Source 9 Audio Track Edit 10 Utility 11 Setup 12 Image Manager 13 Link Setup 14 About HDD Manager USB and USB Firewire Connection so SO SO ON N NN OO WW ND lt lt a ME ey N O OO NA oo M255 CD DVD Duplication System Introduction The M255 Series CD DVD Duplicator is a revolutionary solution that will allow you to link up to 255 ten target towers for a maximum of 2550 targets simultaneously Duplication can be made from a single master CD DVD ROM or Hard Drive The ability to reconfigure the towers to form smaller chains or select standalone mode gives you the ultimate flexibility This easy to use operating control panel consists of an LCD screen and 4 control buttons All operating information such as the function list instructions operating status or error message s is displayed in real time on the screen The built in Hard Drive allows users to load several CD DVD Master Source Discs onto th
13. ator will automatically start loading the disc analyze the source disc and start the Comparison function c When the Comparison is finished the duplicator writer trays will automatically eject gt Press ENT to load discs 5 Analyzing source disc gt Start Comparison gt 100 Finished and eject disc e Note You can ONLY use the compare function when duplicating DATA discs 7 SELECT BURN SPEED This operation allows you to adjust and select the Duplication Speed for the three different disc types CD Audio CD and DVD a Press either button A v to navigate the menu 7 SELECT SPEED and press ENT b You will see three disc types CD Audio CD and DVD Press either button A v lto select a disc type and press ENT to confirm your selection c Press either button A v to select the burning speed gt Press ENT amp use A v to set the data CD burning speed Burn Speed Audio CD 40 Burn Speed DVD 8 8 Select Source Source Drive gt HDD ST380021A Source Drive gt D 1 dvd rom 9 Track Edit Track Edit 1 Copy Track abc 1234567 cde 789 10 ok Track 02 06 14 gt Press ENT amp use A v to set the Audio CD burning speed The recommended Audio burn speed is 40x gt Press ENT amp use A v to set the DVD burning sp
14. c gt Image function will allow you to set the Reading Speed of the master source disc 12 4 Image Info Checks the image file information and file size 12 5 Rename Image This function renames the HDD image partition s name 12 6 Delete Image Deletes an image file in HDD If the file is selected as the source file you will not be able to delete it unless you go back to 12 1 to re select the image 12 7 HDD Info Checks the information in HDD such as the number of discs stored on the HDD and the amount of space left in the HDD 12 8 Format HDD This feature will allow you to format the HDD However if HDD image was selected as the source you will not be able to format it 13 Link Setup 13 1 Set MyPosition This function sets the position of the tower within the chain 13 2 Start Link Executes the linking process 13 3 Update BIOS Upgrades the controller firmware to all linked towers 13 4 Synchron BlOS Synchronizes the controller firmware of all linked towers to the firmware of the first tower 1 Copy 79 45 7 discs detected Copy 79 45 Loading Disc Copy 79 45 Analyze Disc 2 Test 79 45 7 discs detected Copy 79 45 Analyze Disc Test 79 45 Loading Disc Test 79 45 Analyze Disc Operation Guide 1 COPY DISC The following operation shows how to copy a Master Reading Source to a blank CD DVD disc If you would like to make Disc to Disc copies simply ensure that the Master Rea
15. dability Check This operation will check the master disc and the copied discs readability to make sure all of the copies are readable 4 COPY amp COMPARE This operation will start the copying process and then it will continue with a Comparison process to ensure data correctness Therefore the duplicator will not eject discs until a disc Comparison is complete a This operation will directly copy the Master Source onto a blank CD DVD disc Before this operation you have to put the correct reading source and blank discs b The system will automatically display how many blank discs are detected c When the system is ready to copy just place ENT to execute CD DVD copies d When the system starts the copying process it will start loading the disk It will then analyze the disks and then start copying During the copying process the LCD screen will display the Master Source Disc s data size and copying progress e When finished the system will continue with the Comparison process to ensure the 4 Copy amp Compare discs are exact copies of the master source 7 discs detected f When the Comparison is finished the Writer Trays will eject the discs Copy 8 Compare gt Press ENT to load discs Loading Disc gt Analyzing source disc Copy amp Compare 79 45 Analyze Disc gt Start copying Copy 79 45 DSCopying finished 10 08 00 gt Start Comparison Compare 79 45 45 35 45 gt
16. ding Source is set as the READER a Turn on the duplicator before you start copying and ensure that the correct reading source and blank disks have been set b The system will automatically display how many blank discs were detected c When the system is ready to copy press ENT to execute CD DVD copies d When the system starts the copying process it will start loading the disc It will then analyze the discs and then start copying During the copying process the LCD screen will display the Master Source Disc s data size and copying progress e When the copying is finished the Writer Trays will automatically eject Press ENT to load disc and execute copying Analyzing source disc Start Copying Finished and Eject discs Note 2 If your duplicator has a HDD installed and if you would like to make Hard Drive to Disc copies please refer to 12 1 1 HDD Image Manger for more information 2 TEST COPY DISC a This function is a simulation of the COPY process The process is similar to the COPY function with the exception of the writing on the recordable disks b PressA or W to navigate the function menu to 2 Test and press ENT c The system will auto detect the numbers of blank disc and start to simulate the COPY process However there is no data that will be written onto the blank disc d The purpose of this process is to ensure an error free duplication Press ENT to load disc and execute copying sim
17. e Power switch Green LED Firewire ON USB enabled Computer controls the 1 Target drive 15 Target drive will no longer be available to the duplicator OFF USB disabled The duplicator will utilize all drives for duplication Note If switch was toggled OFF while duplication tower is ON restarting the duplicating tower is required Red LED is the USB Power Indicator Green LED is the Access Status Indicator System Requirements e Windows ME 2000 XP Mac OS X Native software is not supported e Available USB 2 0 Port for USB 1394A Firewire port for Firewire e USB Cable or Firewire Cable Not included e CD DVD burning software Not included please check drive compatibility for your choice of software or a software update may be required to detect 22
18. e This function allows you to rename an image file in HDD This will help organize the image _ gt press ENT gt Select the image file you would like to rename gt press ENT Use A V to select the character you want Press ENT to go to the next position There are total of 8 characters for the image name Empty Space will confirm the name change Press ESC to cancel the whole process 12 6 Delete Image This function allows you to delete an image file in HDD If the file is selected as source file you will not be able to delete it unless you go back to 12 1 to re select another image as source gt press ENT gt Select the image file you would like to rename gt Press ENT to confirm gt Press ENT and execute delete Image Manager 7 HDD Info Used OCD 7DVD Free 41CD 8DVD Image Manager 8 Format HDD Caution Format HDD Format HDD Confirm Again Format HDD Complete Link Setup 1 Set MyPosition Link Position gt First Link Setup 2 Start Link Start LINK 12 7 HDD Info This function allows checking all information of HDD such as how many discs are stored and the HDD s available space gt press ENT 12 8 Format HDD This feature allows formatting the HDD However you will be unable to format the HDD if the HDD image was selected as Reading Source You must go to 8 Select Source to select the Op
19. e HDD as source disc images This reduces the risk of damaging the Source Disc that result from heavy duplicating jobs A powerful HDD management system dynamically assigns HDD partitions to each CD DVD disc image loaded onto the HDD accordingly This ideal HDD manager will ensure a flexible and efficient HDD management process Features e 10 Target M255 Duplicator e 2x16 LCD display and 4 control buttons Control Buttons There are 4 control buttons A v ENT Escl A used to navigate up in the menu vi used to navigate down in the menu ENT Enter Execute the function ESC Escape used to cancel or go back to previous function e Supports up to max 52x CD duplication 16x DVD duplication e Offers flexibility in setting different duplication speeds depending on Disc writers e Easy to select Drive as the Master Reading Source e Support for an IDE Hard Drive Device Source CD or DVD disc can be loaded onto the Hard Drive as disc images e Customizable naming for disc images stored on hard drive e Support for Audio Track editing Combine audio tracks into one customized CD e Special Pre Scan feature evaluates master source disc before copying e Support System Startup Password Protection to prevent unauthorized usage e Support Setup Password Protection protects custom settings on duplicating systems e Prevents failures caused by defective blank discs or damaged source discs e Support for Verification func
20. eed Note DVD burn speed setting is only available on DVD duplicators 8 SELECT SOURCE Set an Optical Drive or Hard Drive Disk as the Master Reading Source a Move to 8 Select Source and press ENT b Press A v to select either a HDD or an Optical Drive with assigned number as the reading source gt Press ENT move A ly to select gt Press ENT to finished setting Note If HDD was selected as Source then follow 12 1 Select Image s instructions to be familiar with how to select image files as your reading source Note Each Optical Drive will be assigned a Drive according to their installation sequence If there is then Drive 1 is automatically set as the Reading Source 9 AUDIO TRACK EDIT This process will guide you on how to select audio tracks from various audio CDs and combine them into one customized Audio CD 9 1 Select and Copy Track v to 9 Audio Track Edit menu a Move A b lnsert an Audio CD with music tracks in the Reading drive and Insert ONLY ONE Blank CD R disc into one of the writers c As soon as both audio CD and blank CD R are recognized the following message will appear ready to press ENT on duplicator LCD screen d Navigate the menu by press A v to find the desired track number and then press ENT to confirm the selection Repeat the process to choose the tracks that will be copied to the disk The le
21. ess ENT to confirm gt press ESC to return to Copy Count menu 11 SETUP Setup 1 Power On Time Power On Delay 15 seconas Setup 2 Auto Start Auto Start 3 seconds Setup 3 Startup Menu Startup Menu 1 Copy Disc Setup 4 Write Method Write Method DAO Setup 5 Button Beep Button Beep ON Setup 6 Read Error Skip Use this function group to change the manufacturer s default setting 11 1 Power On Time You can set the system warm up time from 5 sec to 255 sec after system power on a Select 11 Set Up and press ENT b Select 1 Power On Time and press ENT c Press Ally to increase or decrease the seconds gt press ENT press A V to set seconds 11 2 Auto Start This operation allows the duplicator to automatically execute copying once source disc is placed in the master source drive and recordable discs in any of the writer trays You can disable or turn on the auto start function with the time 1 99 seconds it would take to activate this feature To execute this function you must set the operation mode from COPY TEST VERIFY COMPARE COPY amp VERIFY COPY amp COMPARE to auto start copying gt press ENT press A V to set seconds e Note If you set the function off the LCD screen will not show how many blank discs are detected in writer trays 11 3 Startup Menu Select which function in the
22. facturer s default setting gt press ENT to confirm or press ESC to cancel gt press Esc to return to 11 14 Clear Setup 12 IMAGE MANAGER For Duplicator with HDD Installed This function shows how to perform various Hard Drive related operations The system menu will not show this function if your duplicator does not have an HDD installed Please refer to 14 ABOUT HDD MANAGER to get more information about the special function and advantages about this feature 12 1 Select Image This function shows how to select an Image file as a Source that can be copied to discs This function is required when a copy is made from your HDD to blank discs Please refer to 12 1 1 for instructions regarding how to make Hard Drive to Disc Copies gt press ENT press A V to select and press to ENT confirm 12 1 1 Make Hard Drive to Disc Copies Make sure Hard Drive is set to Master Reading Source When it is finished select the image then HDD will automatically be set as the Reading Source a Return to the main menu and press the up or down buttons to select 1 Copy function b Insert blank discs into writer trays If there is a disc in the Reader tray it will not be read Press ENT to start copying If 11 2 Auto Start is selected when a blank disc is placed in any of the writer trays the duplicator will automatically begin the copying process c When completed trays will eject e Note Once an H
23. k discs are detected When the system is ready press ENT to execute copy command 2 TEST This function is the same as above except it will not record to the recordable disc Allows for a simulation run 3 COPY amp VERIFY This function makes a copy and is followed by a Verification process to automatically ensure data correctness 4 COPY amp This function makes a copy and is followed by a Comparison COMPARE process to ensure data correctness with the source disc 5 VERIFY This function operation will check all master and copied discs readability to confirm that all of the copies are readable 6 COMPARE This function makes a bit by bit Comparison between the Master Reading Source and all the copied discs inside the writer trays 7 SET BURN SPEED This function allows you to set the duplication speed for three different disc types CDs audio CDs and DVDs 8 SELECT SOURCE This function allows you to set the master reading source as CD DVD ROM Drive or Hard Drive Disk 9 AUDIO TRACK Makes Audio Track Selections Also allows you to combine audio EDIT tracks from various CDs into a single customized audio CD 9 1 Select 8 Copy Select the track you would like to copy Track 9 2 Close Disc Allows you to close the track editing session in order to make the resulting disc playable 93 Disc Info Check the disc status such as available capacity 10 UTILITY 10 1 Pre scan Confirms whether the Master Source Disc can be properly duplica
24. ord If you select Enable you will need to choose a password Use AL W to select the character you want Press ENT to go to the next position There are a total of 6 positions for the password To enable the password set all 6 positions An empty space is acceptable Press ESC to cancel the process and the duplicating system will ask for password when the unit is restarted 11 9 Setup Password You can enable the setup password to prevent anyone from changing the setting of the duplicating system gt press ENT press A V to select Disable Enable If you select Disable you will go back to If you select Enable you will need to choose a password Use A v to select the character you want Press ENT will go to the next position There are total of 6 positions for the password To enable the password set all 6 positions An empty space is acceptable Press Esc to cancel the process Setup 10 Reader Speed Reader Speed CD 56 Reader Speed DVD 16 Setup 11 Compare Speed Compare Speed CD 40 Compare Speed DVD 8 Setup 12 CHG Bad Master Change Master gt Disable Setup 13 CD Overburn CD Overburn gt Disable Setup 14 Clear Setup The duplicating system will ask for password when 11 Setup is entered 11 10 Reader Speed Allow you to set the reading speed of the reader gt press ENT
25. r service Installation and Setup Guide Step 1 Connect the green end of the D Sub 15 link cable to the sender port 15 port of the duplication tower Step 2 Connect the blue end of the D Sub 15 link cable to the receiver port 2 port of the next duplication tower Step 3 If more towers are present repeat Step 1 8 2 as necessary Step 4 Set Link Position Select 12 Link Setup Press ENT At 1 Set MyPosition Press ENT For Tower 1 Select First For Tower 2 Select Middle For Tower 3 Select Last Press ENT Press ESC Power OFF the Towers Note Additional towers should that are between the first and last tower in the chain should be set to middle Step 5 Power ON the Duplication Towers The screen will show the total number of drives detected Next it will display the number of towers detected At 1 Copy the unit is ready for use 12 Link Setup Link Setup 1 Set My Position Set My Position gt First Total Burner Q ty 30 Total 3 Stations 1 Copy 3 Stations Menu Overview 1 COPY This function allows you to make a CD DVD copy Before the use of this function ensure that the correct reading source and blank discs are placed in the appropriate drive The system will automatically display how many blan
26. ted 10 2 Quick Erase Quick erase re writable discs data 10 3 Full Erase Full erase re writable discs data 10 4 Eject All Disc Ejects all discs in writer tray including master source disc 10 5 Disc Info Displays basic information such as disc type data length and available space 10 6 Drive Info Displays duplicator s major component information such as the manufacturer Writer or Reader model numbers and versions 10 7 System Info Provides the duplicator s information such as the Controller model number Buffer memory capacity and Firmware version 10 8 Update BIOS As manufacturer s certified update CD is inserted this feature instantly updates duplicator s software 10 9 Copy Count This utility keeps track of the number of disc that has been successfully copied 11 SET UP 11 1 Power On Time After the system power is turned on the system warm up time can be set from 5 sec to 255 sec 11 2 Auto Start This feature allows the duplicator to automatically execute copying once disc are detected in the reader and writer trays The setting can be turned off or the amount of seconds can be set to 1 99 To automatically execute the operation mode has to be set to COPY TEST VERIFY COPMARE COPY amp VERIFY or COPY amp COMPARE 11 3 Startup Menu Allows you to set which menu function will be shown first when the duplicator first starts up 11 4 Write Method CD duplication mode can be selected among DAO SAO
27. tical Drive as Reading Source gt press ENT gt Press ENT to confirm format gt Press ENT to confirm and start executing 13 LINK SETUP To access this menu use the iv until you arrived at 13 Link Setup and then press ENT Note If no Hard Drive is present in the tower this function will default to 12 Link Setup 13 1 Set MyPosition This function will allow you to set the position of the tower within the chain a Select 13 Link Setup and press ENT b At 1 Set My Position and press ENT c Press A v to select between First Tower Middle Tower Last Tower or Stand alone gt Press 13 2 Start Link This function allows you to start the linking process Linking process also automatically starts when the duplication towers are first power on a Select 13 Link Setup and press ENT press b Select 2 Start Link and press ENT Link Setup 3 Update BIOS Upgrade BIOS Waiting Disc Link Setup 4 Synchron BlOS Move Data 02713 8 DVD 40CD 13 3 Update BIOS This function allows you to upgrade the firmware of all the towers in the chain Note It requires a firmware CD that contains bin firmware file to work Contact the duplicator manufacturer to obtain the update file a Select 13 Link Setup and press ENT press b Insert a certified firmware upgrade disc in the reader c Select 3 Update BIOS and press ENT 13 4 Synchron BIO
28. tion ensures copied disc s readability e Support Counter Function all major disc types Auto detect source disc e Prevents failures due to defective master disc by allow mid burn continuation e Allows reconfiguration of the towers for standalone or to form smaller chains depending on duplication job e Firmware is easily upgradeable The controller s firmware can be automatically updated to individual towers or to linked towers e Firmware can be synchronized between linked towers as additional towers are added to the chain Specification Max Burn Max Burn Buffer Memory Total Targets Model CD SPEED DVD SPEED Size per Tower M255 48X 16X 64 MB 10 Power Current 4 Amps per tower Voltage 400 watts Environment Working Temperature OC 75C 32F 167F Storage Temperature 20 C 85 C 4F 185F Humidity Working Humidity 20 80 Storage Humidity 5 95 Dimension Length 16 inches Height 9 inches Width 24 inches Warning each tower will draw approximately 4 amps from its power source Please insure that the electrical system has sufficient amperage to support multiple towers on the same circuit Content of the box M255 Duplicator 1 D Sub 15 link cable 1 Power Cable 1 User Manual 1 Quick Start Guide 1 IMPORTANT We highly recommend keeping all your original packing material for your duplicator in the event that the unit may ever need to be sent in fo
29. tter a b c d will appear on top of each selected track DPress ENT v and press ENT to select tracks gt move A gt Press ENT to start burning e Once the tracks have been selected press v to move cursor to the end of the OK display And press ENT to confirm and submit your selection f Once you submit selection Copying Audio Tracks will appear on your LCD screen It shows the track number total number of the current track and the position that coping Track Used 20 53 04 Free 59 25 9 Track Edit Track Edit 2 Close Disc Finalizing Disc Track Edit 2 Disc Info 1 79 59 CD R Use 59 25 10 Ufility Utility 1 Prescan Prescan 20 Prescan Finished Utility 2 Quick Erase Quick Erase Disc ON Oo g Once the Copying Audio Tracks process is complete copied CD will be displayed It shows total track on the CD total time used and total time remain h You will need to finalize indicated on 9 2 before playing back If you choose NOT to finalize you can go back to the first step to continue the process If you choose to finalize please use 9 2 Close Disc Note Once you finished copy Audio Track you will NEED to perform 9 2 Close Disc function for your audio CD If you do not your audio CD will NOT play 9 2 Close Disc Use this process to make a CD R CD RW disc become a playable Audio CD
30. ulation x Analyzing source disc gt Start Simulation Finished and Eject discs 3 COPY amp VERIFY This operation will start the copying process and will be followed by a Verification process to ensure data s reliability Therefore the duplicator will not eject discs until verification is complete a This operation will copy the Master Source onto Blank CD DVD discs Before the use this function ensure b The correct reading source and blank discs have been set c The system will automatically display how many blank discs were detected 37e d When the system is ready to copy press ENT to execute CD DVD copying When the system starts the copying process it will start loading the disk It will then analyze the disks and then start copying During the copying process the LCD screen will display the Master Source Disc s data size and copying progress e When finished the system will continue a verification to make a disc Readability check f When the verification is complete the Writer Trays will automatically eject the completed discs gt Analyzing source 3 Copy amp Verify 7 discs detected Copy amp Verify Loading Disc Copy amp Verify 79 45 5 Analyzing source disc Analyze Disc gt Start Copying Copy 79 45 10 08 00 gt Copying finished and start verification Verify 79 45 gt 100 finished and Eject discs 45 35 45 Use verification to make a Disc Rea
Download Pdf Manuals
Related Search