CAUTION - Plantec Distribuidora
Contents
1. 6 7 1 Administrate Users 1 User right Manager Can use all the functions of system General user Can use monitoring mode only 2 User addition Input each content of user information Click additional button in order to add it into user control list Description Default User crs 3 User cancel Select user to be cancelled from the registered user control list Click cancel button in order to cancel it from user control list UserID Us Administrator Administrator Admin A d mi n 6 7 2 Storage equipment control This is a function to check and control the information on disk installed at system The information on disk installed at system is displayed as shown in the figure Disk Drive Information To al Size 3 81 GB Used Size 1 72 GB 44 Free Size 2 13 GB 56 Assigned To al Size 34 18 GB Used Size 66 1 MB 1 L Free Size 34 12 GB 99 No Assigned lo al Size 34 18 Lib Used Size b5 b MBITZJ Free Size 34 12 GB 99 No Assigned Teal Size 2 25 GB Used Size 14 1 MB 2 Free Size 2 24 GB 99 No Assigned 1 Disk recording sequence change It is possible to designate the recording sequence for the disk installed at system and minimum allowable space If disk space is deficient during image recording cancel and record the oldest data WE 6 8 PTZ Control and Image Pursuit Function System Setup E 161 General x Camera Motion D pio ch Audi2. C Use Multi Channel Device SA _ _ O Enable Device Name 1 SoundMAX Digital Audio Device Name oo 1 SoundMAX Digital Audio Adjust Volume CJ UseMultiCsannel Device select device to be used Separate hardware equipment shall be installed in order to use multi channel audio Selection of device shows device list as shown in the following figure Select devices to be used by clicking It is possible to adjust audio input volume by clicking equipment name Device Name eo Like 1 SoundMAX Digital Audio Device Nene D 1 SoundMAX Dictal Audo Cori 2 Selection of audio input Soundcard user Left sound 4 Right sound Choose between line In and Microphone for the audio source It is possible to record image and audio simultaneously by clicking audio input channel button and clicking camera button connected e g Microphone user Ez 14 Micraphane Audio IN Camera LJ Line In Audio 1 AE lt Select Microphone gt lt Select a camera number gt In this case camera1 image is recorded together with the audio inputted to channel of sound devices e g Line In user Left channel of stereo line in is Audio1 and Right channel is Audio2 ETc e Audio IN Camera Microphone ABRE Audio 1 s 1 D x Line In amp ue2 F 2 Select Line In Select a camera number Reference ca
3. desired image 1 Storage on diskette and then clicking mouse Supports JPG BMP format show capture mode screen Pressing button shows the following screen Save in E My Documents Di da e E File name E PG Save as type Sara E Designate the route to store and the name of file set file type and then store it wwe Locs t k CH w Lu aber 1 1 w LOC if d 5 MM iw Fl gt deeddfiirexgrec t D Mr amer hey Meteors Pisces dw Bs um la lth If printer is connected to system the currently captured screen is printed 6 Setup Mode You can configure the system activation SS soem 7 VY LOO m RIT Zoos e MI Lei WAN sl Setup mode is consisted of 8 tabs lt could be changed by program version After you select tab you can setup camera in detail 6 1 General Information A General ex Camera Mation a o Ch Audio F4 Schedule g Network e User Storage a PTZ amp Site Infomation amp System Log View Model DSFO303 Product No fi 3 0 5 2004 01 Logon 6 Ba 17 H P Se E 16 33 44 d Setup 0 H S Network SY Backup 0 Led Error 0 Install Date fi 17 2004 Install Place NENNEN Administrator Administrator amp System Infomation System Date 1717 2004 y 51215PM LJ Use Shutdown System Hour Min Dayofiveek Pe od Daily O Weekly 4 Enable WatchDog 60 Sec
4. t 56 7 9 3 Image Channel Entire Sree Nessun notaio tn annuae iii 56 7 10 Storage of Remote Monitoring Image 57 FS MS ee OF Oke Dal VE 57 7 12 Remote PTZ el de m Eiai 58 Talo Remote Environment Se Dat rana 58 TIA TWO I AUTO crecen 59 1 len rimari DO nase 59 2 WSS OT VV CD e lp Bik EE Screan ONIN eege 63 8 2 Automatic Conversion BUT OM DEE 63 8 3 WIOMMOMING OF Remote IMAGE EE 64 8 3 1 Configuration of Remote Image Monitoring SCreen ccccceeceecceceeeeeeeeeeeeseeeseeeeeeeeeaaeeeeeeeseaaeees 64 8 32 Remole e 3 MR RERO T 64 8 3 3 Image Channel Entire Gcreen nennen nennen nnne nsns nnn nnn n na nnns 64 8 4 Storage of Remote Monitoring Image 65 05 ROMo PIZ Sors NM MR HR 65 OO en e o o E cen dase EA 66 Symbols and Letters used in this Manual Importance mark Arrangement of items to be considered for completing work Additional information or tip to avoid in order to completing work Mouse left button click Mouse left button double click Cor 1 System Requirements Supported OS Recommended Windows 2000 or higher Windows 98SE Windows 2000 or Windows XP System Requirements Processor Intel Pentium III 800MHz or higher Main Memory 128MB or higher Recommended 256MB or higher Video Card 32MB or higher ATI Radeon 7000 or highe
5. 2 5 Entre Gadmera ADDIICAHOLD EE 35 ng dentia ance aet i dude ei nsde deduc dE 36 6 3 1 Setting of alarm output and camera preset movement pursuant to sensor input 36 6 32 VV AVS OUT T x a HM 38 SE Emal UN A TMM EE E TEE E O ash ge sie beacon een aaanc en sunm Oeyeuenacecunee 38 OX AGIOS CTU Datacenter see lesa o eae dU ta 39 6 5 Setup operating Schedule EE 41 Gs NeIWOFK oe E 43 6 7AdministrateUsers and Recording drive 45 D LAGIM TIE EE 45 6 42 otorage equipment COMO E 46 6 6 PIZGohlirol and Image Pursuit FUNCION ii a A NA EEEN 47 eom M uarie rc TET 47 02 Preset giRcl e pepe m 47 6 373 opeed ahidgle et EE 48 Reg elis Oi me TT E 49 7 1 Checking of Time and Space Used in Storage Equipment eese 50 7 2 Divided Screen COMIN Ol cx c c PR aaa ied 50 t o Entire Seres ME Mlal Qe Metro A AAA a eeastets 51 7A AUtomatic Conversion BUIN A a sda lautctsad tae eal Anas satatadeets 51 TO SEIVEl LIST COMMON EE 51 reis Weed ie OF DIVA SO Vial aida Di E ege e DV EE 54 7 5 3 Modification of DVR Server Information 54 7 6 Ed ie Ae die d Le EE 54 O WE 7 7 Cancellation of Network Connection ccccccccononncnccccononcconnnnnononanonnnnonononrnnnncnonnnnnnnnnnrnnnn ran nnne n nnne nennen 55 7 8 DVR AUtO COnNNeCtON A T T 55 7 9 Monitoring of Remote Image 55 7 9 1 Configuration of Remote Image Monitoring Gcreen nenne 55 ERA o
6. It is possible to set value by pressing the desired function button v ea Specify the left limits Specify the right limits Specify the top limits Specify the bottom limits Cloris 7 Use of Network Client Client of CNB DVR can totally operate different DVR server through network access It is possible to display image of DVR systems connected to network on the a maximum of up to 36 image channel screen and to use various functions such as environment setup control and multi directional audio communication etc CO Beatty 30606000 Displays current date our week and HDD usage space set on client system in percentage Used for divided screen control Used for screen automatic conversion pursuant to entire screen enlargement and divided screen Displays the list of server connected to network Used for search mode conversion of the server connected to network environment setup search mode conversion and screen capture o Used for sensor alarm control and pan tilt control of the server connected to network Used for remote server access access cancel image storage and camera list view function Displays remote image input status of image channel displays on screen 9 Ends system lw E 7 1 Checking of Time and Space Used in Storage Equipment OH DATE T ME 200308318 3 d d Indicate date time week of current client Recording disk of client is C drive and usage quantity of this disk
7. client Remote search does not support video random search function 7 12 Remote PTZ Control Select the system where PTZ is installed with network connected to DVR server Select system by clicking button if multiple connection is set Clicking id e button shows control screen Basic usage method is same as control function of DVR system 7 13 Remote Environment Setup Select the system to change environment setup remotely with network connected to DVR server Select system by clicking button if multiple connection is set It is possible to set geneal operation matters of selected system by clicking button It is impossible to modify network and PTZ items Refer 6 Setup Mode Cri 7 14 Two way Audio This button enables voice communication between DVR and Web viewer This function requires configuring DVR to record Audio Refer to 6 4 Audio Setup e Configuration the settings for Sound Device In case of using the sound card the voice communication can be improved if setting of audio equipment for the Windows s system is as below If the audio equipment is SoundMAX delete the basic program and driver and install the driver of audio equipment Sounds Tab Scheme No sound Volume Tab Speaker settings Advanced Performance Hardware acceleration Full sample rate conversion quality Good Audio Tab Playback volume Microphone and Line Mute Volume up to max Recording volume Sele
8. is displayed 7 2 Divided Screen Control Pressing screen division button on the client software monitoring screen changes division type shown on the screen Basic usage method is same as DVR system Pressing screen division button on monitoring screen changes image type of outputted screen The channel of client is outputted as composed in the server list without being limited to any particular DVR Remotely monitors the selected one particular channel only Remotely monitors 4 channels by dividing channel screen into 4 parts Example 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Monitors 6 channels by dividing channel screen into 6 parts Example 1 2 3 4 5 6 7 8 9 10 11 12 11 12 13 14 15 16 Monitors 8 channels by dividing channel screen into 8 parts Example 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Monitors 9 channels by dividing channel screen into 9 parts Example 1 2 3 4 5 6 7 8 9 8 9 10 11 12 13 14 15 16 Monitors 16 channels by dividing channel screen into 16 parts Example 1 2 3 4 5 6 7 8 9 10 7 8 9 10 11 12 13 14 15 16 Monitors 25 channels by dividing channel screen into 25 parts Example 1 2 24 25 12 13 35 36 Monitors 36 channels by dividing channel screen into 36 parts Cori 7 3 Entire Screen Enlargement If you want to see division screen in the entire screen without function button click button so that it may be expanded into entire screen Double click mouse in order to r
9. le de iai zech aZ r gr fr OP UU OON WC A ONE 85585 36355 2003 19 09 u cris button starts data backup 2003 09 15 COO 01 2002 09 15 01 00 14 x I 2003 00 75 04330222 2003 09 15 Cae a 2003 00 75 0533020 2003 08 15 2 20 4 b Mi I1 OHE 0630322 2002 09 15 Uae 05 08 15 07 33 3 2135 08 15 06 00 18 2003 08 15 0 00 36 2005 09 15 0 amp 43 40 2005 09 15 46 1X 2003 00 15 0 80 20 2003 08 15 16 00 0 3 Option selection Automatic termination after finishing backup Backup program is automatically terminated after finishing backup Cri 4 PAN TILT Control Mode PAN TILT camera operation can be used when controller such as RX receiver is basically connected Pressing pan tilt control button at monitoring mode shows the following control screen Press pan tilt control button again and then click button in order to return to monitoring mode Setup gt PTZ shall be performed in order to control Pan Tilt and if there is one or more cameras connected to the system Select camera channel to which pan tilt drive is connected using The following functions can be provided according to the kind of camera Rx receiver and housing Zoom In Out Focus Housing function Light On Off DT EE PAN left right TILT up down Auto PAN Auto TILT Auto PAN TILT camera power source Preset position Cori display camera OSD installed inside of Pan Tilt It is possible to move and
10. not provide more network access service a E The number of client The working status of client e g Screen display in case that there is one user who have access currently and environment setup is under work 1 PA Double click the screen which indicates access persons in order to see detailed information of connecting persons NETWORK IP Address 192 158 1 215 Setup Me BANISH gt CLOSE At BANISH This is used to end connection compulsively with currently connected users Select users from list and then click button This is used to close detailed view screen Cri 2 6 Camera Image Input Status View Displays camera image input status EM CAMERA Displays the status where camera image is normally inputted Consists of buttons and clicking the desired camera button displays single channel screen Displays a status where camera image is not inputted 2 7 Sensor Detecting Status View Displays the operation status of each sensor connected to the system Indicates that sensor is connected and operated normally It input occurs on sensor color changes 2 8 Alarm Output Control E ALARM Displays the operation status of alarm equioment connected to the system and can control operation by pressing numerical button Sets and uses the basic operation status in environment setup gt DIO part 2 9 Volume Control Can control the volume of audio which is outputted to the outside
11. other port number if default port number of 80 is not workable Contact your ISP for available ports for web server construction Private IP Subscriber IP Address 192 Subnet Mask 255 255 255 0 255 255 Default Gateway Le amer 0 1 Ze Web Monitoring v Support web Viewer v Proxy Setting fi 32 158 0 1 Web Server Port 30 Private IP requires Proxy Setting for web monitoring Insert IP address of IP sharer or router that has public IP address Primary DNS server Secondary DNS server In addition you have to setup Port forwarding or DMZ of each of the IP sharer or router Look up their user manual for details BestCap DVR uses default port of 80 7074 7075 7076 7077 49557 and 49559 for streaming Ss web Monitoring v Support Web Viewer v Proxy Setting dvrsyst dyndns org Web Server Port 20 You can insert domain name instead of IP address Cz E 6 7 Administrate Users and Recording drive System Setup User Manager ey Administrator Administrator Total Size 3 91 GB Used Size 1 72 GB 44 Free Size 2 19 GB 56 Assigned Total Size 34 18 GB Used Size 66 1 MB 12z Free Size 34 12 GB 99 No Assigned Total Size 34 18 GB Used Size 65 6 MB 1 Free Size 34 12 GB 88Z No Assigned Total Size 2 25 GB Used Size 14 1 MB 1 Free Size 2 24 GB 99 No Assigned
12. the recorded image of End of play selected channel Temporary stop Clicking button regenerates image in divided screen suitable for the selected channel At this time time domain changes by minute unit as shown in the figure 00 01 02 03 LZ 08 09 10 11 12 13 14 15 16 17 183 1 Configuration of play screen D Displays the recorded time of regenerated data 2 Displays the recorded status such as audio Indicates that the data forgery preventing function digital water marking is 9 included 2 Modification of play timeClick mouse at the desired position in order to regenerate image at particular time 3 Play speed adjustment It is possible to designate play speed of image by clicking a EJ button e g x1 10 Slowest x32 Quickest 4 Audio Play You can playback the recorded voice simultaneously if the data recorded with audio Audio play is outputted up to a maximum of 8 channels at a time and clicking and selecting channel from play screen output only the audio of that channel O Brightress Clicking EE button can adjust brightness and contrast of image Image adjustment is possible only at the status of temporarily stopping image play by pressing button 6 Digital Zoom In Out This is a function to enlarge the particular domain of image which is outputted on the screen Pressing button and then moving mouse to the upper side of output image change shape of cursor
13. 03 02 00 05 3598 NO REC o 2003 08 14 02 00 06 03 00 00 3584 NO REC o 2003 08 14 03 00 01 04 00 00 3591 NO REC o 2003 08 14 04 00 01 04 00 14 14 NO REC Itis possible to arrange data by clicking the following each button from the searched data list Frame Start Time End Time Rec Type 3 2 2 Backup Data Play Select and click the data to regenerate from the searched list It is possible to select up to 16 data to regenerate C h Start Time End Time Frame 01 2003 08 14 00 46 58 01 00 02 784 NO REC 01 2003 08 14 01 00 03 02 00 05 3598 NO REC 01 2003 08 14 02 00 06 03 00 00 3584 NO REC 01 2003 08 14 03 00 01 04 00 00 3591 NO REC of 2003 08 14 04 00 01 04 00 14 4 NO REC Regenerate data by pressing button after finishing data selection As shown in the below figure data is regenerated on the divided secreen suitable for the number of selected data 1 Information on the data under play Clicking the screen under play displays basic information on start and end time of data and storage method EH WE 2 Movement of play time Click the data screen to move play time and then click and select the time to move from the time axis located at the back and lower side using mouse 3 Movement to backup data search screen Stop data play and then move to backup data search screen 3 2 3 Going Out Pressing button ends backup data search and play program Gr 3 3 Data Backup This is a function to back up
14. BDx Series v2 0 User s Manual LAARA WU 08 TAARA UARA I e NNNM AARS d IR SS e CoP This product is made by advanced technology of CNB Technology and passed reliability and compatibility test Product quality can be guaranteed This is an operation guide for BDx Series user This guide gives you BDx Series s way of configuration of system program If you are first user of BDx Series DVH even though you are experienced with similar products like this we recommend you to read this manual carefully and follow the instructions inside before using this product CAUTION The copyright of this manual belongs to CNB technology It is prohibited to copy this manual without permission We do not guarantee if your system is damaged by your mis using disapproval components or mis operation If you have any problems or questions with our product please contact the dealer you bought from or CNB Technology If you need to open the system for modification or repairing it is recommended that you have to request an engineer s assistance by contacting the dealer you bought it from or CNB Technology DSx Series and BDx Series are registered trademarks of CNB Technology DVR system This product has certification for domestic and industrial use Also it has taken CE for Europe FCC for the U S GC Contents re 1 SA O o e 2 Neal ele le feito lo ee 2 1 Checking of Time and Storage Equipment Using Gpace nennen 9 a
15. O Video HDD loss Notification Start Time 2004 01 17 16 38 45 End Time 2004 01 17 16 51 54 UserlD Administrator ob Comment Played 4 channel es in quick motion at 2004 01 17 16 00 00 Played 1 2 3 4 channel es at 2004 01 17 16 Hour Dele Al waterMarking LJ Use Digital Video Watermarking Ikeo 1 Site Information T de de Model Name It indicates the model name of system Product version lt indicates the version of program Install Date It indicates the date of system installed Installation place It is possible to set the place where system will be installed arbitrarily Manager It is possible to input system manager Cri 2 System Information System time You can change the system date amp time Use Restart turn off system You can setup system restarting turn off time How to use watchdog Set it so that it may be re booted during abnormal operation by checking whether or not to operate system normally at every set time Video HDD loss notification Beep sound notify for video or HDD loss 3 Digital Video watermarking Create and inserted features at frequency domain for each frame in order to detect modulation detection of MPEG data Whether the stored data is modified or not is displayed on the play screen 4 System Log View It indicates Aug 2002 To choose the date double click to icon When you choose t
16. PEG file Stored position is CARecordData 8 5 Remote PTZ Control Select the system where PTZ is installed with network connected to DVR server Select system by clicking button if multiple connection is set Clicking d Y e button shows control screen CEGCBAZAFIINCOECON DEZ Cna we c09 Ready CIE Ready Basic usage method is same as control function of DVR system cris 8 6 Two way Audio This button enables voice communication between DVR and Web viewer This function requires configuring DVR to record Audio Refer to 6 4 Audio Setup e Configuration the settings for Sound Device In case of using the sound card the voice communication can be improved if setting of audio equipment for the Windows s system is as below If the audio equipment is SoundMAX delete the basic program and driver and install the driver of audio equipment Sounds Tab Scheme No sound Volume Tab Speaker settings Advanced Performance Hardware acceleration Full Sample rate conversion quality Good Audio Tab Playback volume Microphone and Line Mute Volume up to max Recording volume Select input Microphone or Line in Volume control Advanced Uncheck AC3 SPDIF and PCM SPDIF check box
17. Setup A General EH Camera Motion E o ch Audio i Schedule S Network tA Network Set Site Connection Code 00 001 Bandwidth un LIMIT Send Priority 4 High LJ Normal Change for the transmission priority setting is available on 6 6 Network Settings 6 2 3 Record Trasmittion Image quality Setup Image quality is set up in the level of Low Medium High Maximum In setting Low the file size is reduced and image quality is low In setting Maximum the image quality is high and file size gets big In network transmission the transmission can be higher if the image quality setting is low In case of making the image quality high if network transmission speed is set up Low which brings the same effect 6 2 4 Input video information on the Recording file Rec UL Trans t Maximum J Medium J Maximum Camera 01 08 31 2005 112437 A Camera Name Position00 Resolution 320x240 O Display camera name on screen v Save text in video J Inverse Brightness Contrast Hue 128 gt 223 gt 128 H WE Recording file is played on the normal media player such as Wiindow Media player this is used to check the image information Image information is recorded in the saving file which enables the image information in playing the Player IL III In use of image information input function on the recording file please use this function when it is nec
18. ameras immediately when connected Alert Wave file Camera input Loss Server will notify the Client of video loss Motion Detection Server will notify the Client when motion is detected Use of IP Port forwarding Recommended to leave as Default Connect Port TCP Input the Connecting Port used at the Server Video Port TCP Input the Video Port used at the Server Media Server TCP Input the Media Server Port used at the Server Audio Port TCP Connect Input the Audio Port used at the Server Audio Port UDP Transport1 Input the Audio 1 Port used at the Server Audio Port UDP Transport2 Input the Audio 2 Port used at the Server This option enables automatic reconnection when the connection to DVR is cut out Check Auto Connection on DVRs where the connection is to be automatically revived 7 5 2 Cancellation of DVR Server Click and select the server needing cancellation from registered DVR server list Click button and then cancel it from list Click e 132 1661 225 button in order to cancel the entire list 7 5 3 Modification of DVR Server Information Click and select the server needing modification from registered DVR server list Modify the content and then click button in order to finish modification of server information 7 6 Network Connection Clicking and selecting the server to be connected from list make change to status Click mouse item again in order to cancel connection item Click LEE button in o
19. ble In this case camera1 image is recorded together with the audio inputted to channel1 of sound devices camera2 image is recorded together with the audio inputted to channel2 of sound devices 3 Configuration the settings for Sound Device In case of using the sound card the voice communication can be improved if setting of audio equipment for the Windows s system is as below Sounds Tab Scheme No sound Volume Tab Speaker settings Advanced Performance Hardware acceleration Full Sample rate conversion quality Good Audio Tab Playback volume Microphone and Line Mute Volume up to max Recording volume Select input Microphone or Line in Volume control Advanced Uncheck AC3 SPDIF and PCM SPDIF check box Cria 6 5 Setup operating schedule System Setup l E ental oy ok eee Kex TEE EE CR T AT EAEE AE Special Day TE ER September 2003 v Sun Mon Tue Wed Thu Fri Sat SE T sen d WS amp B 30 I 12 14 15 16 17 18 19 Zt 22 23 24 25 2 28 29 db 2 3 gt E 8 3 w Select recording type at time date working date weekend holiday per each camera 1 Setting up recording type Click a button on Setting up recording type and drag the camera amp time part as you want t d Select this button when you activate surveillance function without recording Select this button when you record continuously Select this button when you record in case motion is d
20. ch recording status are sensor detection recording and movement detection recording When movement is detected the status of recording the previous action is Cri First of all you have to log in to use the program You can use the program by clicking LOG IN Button after typing User ID and Password We recommend you change password after log in Default registered ID Administrator Password 111 EXIT SYSTEM on Exit Program Reboot Shut Down Minimize X CANCEL 1 Enlarged viewing of divided screen by one channel Clicking the desired channel with mouse left button enlarges screen by one channel 2 Returning to divided screen Clicking mouse left button on screen returns to divided screen ors 2 1 Checking of Time and Storage Equipment Using Space O DATE TIME SY stn Ee COTAS IE s 40 03 at Qai ram EN CH 510 PLE pots de 1 4 A OLAS DOM e Cr Cer Friday y E 1 Checking of time It is possible to check the time set on current system 2 Checking of storage equipment using space Displays the capacity used for the entire equipment installed in the system in percentage Based on 98 of storage space the longest data is automatically cancelled and stored 2 2 Divided Screen Control Pressing the screen division button on storage monitoring screen changes the division type seen on the screen The selected only one channel is displayed on screen Each clicking of button changes i
21. ck Network Setup of DVR and Port forwarding settings of IP sharer Router Disable firewall of O S of DVR system to DVR software DVR Mediaserver Apatch Change web server port if your local ISP blocks port 80 First of all you have to log in to use the program You can use the program by clicking LOG IN Button after typing User ID Password When you connect DVR for the first time your client system download and install ActiveX It may take several minutes according to your network condition Once Active X installed the below Monitoring window appears directly from the next time Cri When the above monitoring window does not appear disable Popup Stopper in Tools of Internet Explorer When video does not appear Check Port forwarding settings of IP sharer Router Disable firewall of O S of DVR system to DVR software DVR Mediaserver Apatch or Change web server port if your local ISP blocks port 80 It is possible to display image of DVR system connected to network on the maximum of up to 16 image channel screen and to use various functions such as environment setup control and multi directional audio communication etc Cri OVO screen C Di pture W amp G 69 Q 6 6 6C cr gt ite 211 000 004 DEZ CallWeb Microsont imernet Explorer ou en vo E R COS Ready t Sod Ready e Q OOo O60 0 GIS Reat O 40 Displays current date hour and week set on client system Used for div
22. ct input Microphone or Line in Volume control Advanced Uncheck AC3 SPDIF and PCM SPDIF check box 7 15 Software Watch Dog Client software automatically executes Client watch dog software when it starts up Client watch dog is different from DVR watch dog function DVR watch dog work on hardware and resets entire DVR system when indicated abnormal system halt but Client watch dog just revives only Web viewer software when the software stops abnormally CnEDYR EX gt 10 56 AM Client watch dog setup BER Interval fo fv min Bg vw sec 1 Minimize Double click on alarm clock icon in system tray and Adjust time interval Watch dog diagnose operation of program at preset interval When diagnose indicates abnormal operation of program it stops program and restart Click on Stops X and watch dog will stops Gr 8 Use of Web Client Web Client of CNB DVR can totally operate DVR server through web browser Type IP address or domain name of DVR server into Address on Web browser internet explorer and click GO e g _http 211 000 000 0 or _ http dvrtest dyndns org If you are using non default port number then type the address as below Port 8000 _http 211 000 000 0 8000 or _ http dvrtest dyndns org 8000 3 CNB Technology Inc Microsoft Internet Explorer Lulu ro T EC CAN Administrator sl e 0o 0 O TT me Z7 If this log in window does not appear Che
23. data on the external type hard drive CD etc 3 3 1 Data Search 1 Date selection If drive is selected click and select date Red color date indicates that there exists data 2 Time selection ef RE D inc UU UU 00 00 Select time to search data The time indicated on the upper side is the time needing search and the time indicated on the lower side is the last time If time has been set click button and then start searching Searching the time being set basically displays all the data list recorded on the selected date cris 3 3 2 Data Play and Backup 1 Data Play Select the data on the desired time from the searched data list Click z 8 15 OX x af AHS HE IT 15 2000 5 Dia AM Im Zr II 2003 08 15 326 14 Exam bn mu SER RENESAS SUE 1030415 I 1034915 1 034 button in case of wanting play 2 Data backup Select the data on the backup desired time from the searched data list and then click button Select the drive to back up data Clicking TET DN 2009 19 14 HKN 2300 19 39 Pet 2009 19 03 1T 2009 19 19 tt 3003 10 09 F3 2003 19 06 12 bb n nn 03 10 19 tt 2011 19 09 FT 2003 09 91 2003 39 93 HS t i 2009 10 10 1024 44 3103 10 10 102444 2003 10 10 103444 2903 10 10 1 2903 10 10 1034 44 am 10 10 1 i 3 10 1 I 2003 10 10 1024 44 3011 19 10 1024 44 ot prey Gei A feck usb Ha ERE a a 03 19 19 t GD t Pe sad AA la
24. de bar with mouse The value set when shipping system is the most proper sensitivity ee ee P sti Motion Detect E vent C Beep Out L Popup to FullScreen If you need to check of sensitivity select Output Motion Area check box and press Save Then detected movement area display blue color blocks 3 Movement detecting event setup If movement is detected when setting movement detection domain the set event can be carried out Beep Out Outputs beep sound through system inside speaker Output the Wave Sound Outputs default wave sound set at I O setup tap through outside speaker Popup to Full screen Enlarges image into entire screen if movement occurs at the set camera Send the Image E mail Transmits the captured imaged to the e mail address set at I O m tap Output Motion Area Displays an outline of movement area when a movement was detected amp at monitoring mode Notify to network clients Sets external alarm connection in order to automatically operate siren buzzer etc to the connected system in case of having detected movement Option cris 4 Outside output image setup web D uw Video AP 12 3 LX SS It is possible to set the image channel outputted through outside output terminal separately from the monitor connected to the system This is set by clicking button and in case of selecting one or more channels output is performed i
25. e E UU E eure E E A 9 23 F l Secre Din Led caretas tad rior 10 24 Automatic GON Version BURON DE 10 2 5 Display of Network Connection Service Gitaius eene 11 2 6 Camera Image Input Status View 12 2 7 Sensor Detecting Status View 12 AO A 12 1 VOM SORT E 12 2 Search Mode SNE Ed DATA tarro est 13 3 1 1 Select Date Playback Channel and Time 13 3 1 2 Play OF Search MI Te ERIT 14 Sl Eeer 17 3 1 4 Motion Search Quick Play cccooococconocnccccccoonoonnnononnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn cnn nen e e nn 18 9 2 Backup Data Search andP dyocesis nata tht enean dai 19 3 2 1 Backup Oa Se EE 19 Ir M size Ue PII zd zb PITT mU 20 SEPA Coo M 9 21 33 Data DAC CUD EET 22 SEN RE oM M 22 SR H Fia Tute Ee le DE 23 2 PAIN IED EE EE 25 4 1 Camera OSD Control DRITTE 26 4 2 Pan Tilt Direction Eet te PER oO REST 26 4 3 Zoom Focus ens EEN 26 44A Prese OPE l9 ERRORES D EE SPERM 26 Cz WE 1 Peripheral Equipment Control 26 2 0 69 FUN A e E o 27 3 JA AP 28 SAEC Eeee nu LE 28 6 2 Gamera Movement DOlUb ont tas 30 6 2 1 Camera Movement Getup nenne nennen nnn nnne nnns nare n nens na nnn nnn 30 6 2 2 C amera tecord RT EE 32 6 2 3 Record Trasmittion Image quality Getup enne nnne 34 6 2 4 Input video information on the Recording file 6
26. esired screen in order to enlarge it into entire screen In order to return to the original status double click the left button of mouse again on the same screen When it is enlarged into entire screen with 4 channel divided screen clicking by selecting other image channel screen enlarges it into entire screen 2 4 Automatic Conversion Button When screen division is set pressing this button changes camera channel in turns and then outputs monitoring image Press the button again in order to stop automatic conversion function or press image channel screen in order to cancel automatic conversion function Automatic conversion time can be set in Setup mode gt Camera Motion gt Channel Rotate If image channel screen is pressed to come to an end clicking mouse is not changed into 4 channel division screen ln case of canceling automatic conversion function by clicking channel channel is set to be fixed 2 5 Display of Network Connection Service Status This displays the network access service status of system and the work status of connecting person if there is user who have access to the system using client program Color of right side lamp displays the status of access service It is possible to change access service status by clicking button Yellow color allows access through network client program White color maintains connection for the person currently under access but indicates that it does
27. essary as it uploads the DVR 6 2 5 Entire Camera Application This is a content of setup which is applied to all cameras 1 Input signal It is possible to select camera input method The current system supports two kinds of method such as NTSC and PAL 2 Channel automatic conversion lt is possible to set channel conversion interval on the divided screen at monitoring mode 3 Outside output automatic conversion It is possible to set conversion interval of the channel selected at outside output image 4 Popup lasting time Set the time when the entire enlarged screen is maintained at monitoring mode when movement has happened 5 Setting to current status Applies the currently set content Display camera name on screen Inverse Movement detecting event Movement detection sensitivity to all cameras Cri 6 3 Sensor Alarm Setup System Setup QI General EN Camera Motion El 1 0 Audio 2 Schedule amp Network E User Storage e PTZ amp Device Connection State amp Sensor Action Sensor In Digital Dut Duration Time Normal Close NC amp Normal Open NO Camera Preset E 1 a i Se a 4 y c3 Default Wave Wave File Volume Seagate pipet tide eege A EA s e E Mail Alarm Email Server User ID Password Sender Address Receiver Address Interval of Send 30 Sec O E mail when sensor detection O E ma
28. etected in surveillance area Select this button when you record in case sensor event is occurred Select this button when you want to record from former image in case motion is perceived It could be go down the saving speed if you setup this function to multi camera Cars This button initialize the recording value Initial value is specified as continuous recording Apply to all camera which is selected channel Screen display pursuant to recording mode Movement recording sensor recording Movement recording prior recording Movement recording sensor recording prior recording 2 Setting up special day function you can use holiday recording if you specify a certain day as holiday Select the day you specified as holiday on calendar Select 4 EI button when you move to the last or next month Select the only one cycle among every year every month every week one time Delete All Add the date you specified as holiday to the right list This function deletes the listed holiday each This function deletes all the listed holiday 3 Pre post recording setup Pre recording frame In case that system is operated by movement sensor recording it is possible to set the time before recording start movement sensor event occurs Post recording frame In case that system is operated by movement sensor recording it is possible to set recording lasting time after movement sensor event happens CAN 6 6 Network Set
29. eturn to original status If you want to see one screen by expanding it into entire screen select the desired screen and then double click the left button of mouse in order to expand it into entire screen Double click the left button of mouse again in order to return to the original status 7 4 Automatic Conversion Button Pressing this button with screen division set can output monitoring image by changing camera channel in regular order Click button again in order to stop automatic conversion function Client cannot adjust automatic conversion time interval separately which is set at 5 seconds 7 5 Server List Control E YT E 4 Used to be connected to the DVR system installed at remote place 7 5 1 Addition of DVR Server Select network access type Direct access type is a general Ethernet environment which includes LAN xDSL and cable network Dial access type supports access using modem e If setup has been completed click button and add it to list DVR servers registered on client are outputted on the list of the following servers Use Direct Access Use Dial Access Gr SOECT SIE FO COMADCT Server name Server description Site code Server IP address User ID User password Cri Detail Setup This is used when the internet address IP of connected DVR is known and the address is authorized address and does not change dynamically Dynamic address of ADSL etc is possible by operatin
30. g separate server If modem is installed at connected DVR and phone line is connected make access by inputting the phone number at address input column Input name in order to identify server This server name is replaced with the name inputted at the installation place of DVR automatically when being connected to DVR server Input more detailed information on server Input access code which was set to server by manager If this access code is different from the access code of the server to be connected access is rejected Default is 100 001 This is an item where internet address of server is inputted In case of selection through direct connection input IP address or domain name and in case of selection through phone access input phone number This is an item where user ID registered on server is inputted If there does not exist user ID inputted on the server for connection access is rejected This is an item where password for the already inputted user ID is inputted Select Detail Setup SELECT SITE TO CONNECT Ver 2 0 0 4 M Auto Display After Connection e Alert Wave file Bi Camera input Loss Motion Detection Use of IP Port forwarding e Connect Port TGP TO e Audio Port TOP OConnect e Video Port TOP 7076 e Audio Port UDP Transportl Media Server Port TCP 7077 e Audio Porti IDP Transport2 EM Auto Connection DU SAVE X ICANC DEL CONNECT Auto Display After Connection Displays all c
31. he date it displays major work such as login search setup etc according to the time line on the right side If you select time it displays about the information in detail below the screen cris 6 2 Camera Movement Setup QI General EX Camera Motion a 1 0 Audio 7 Schedule ES Network EI User Storage e PTZ 3 Camera Motion v LH HL HS e H He He e He Heute ten e D BOOK CIO CameaName BEEN Gi Resolution zoo J O Display camera name on screen e 3 LJ Save text in video O Inverse Z 7 Brightness Contrast Hue s qwe DIE 28 ite ye Motion Detect E vent Motion Relays LJ Beep Out LJ Output the Wave Sound LJ Popup to FullScreen LJ Send the Image E mail LJ Output Motion Area Sensitively Camera Input NTSC OPAL Channel Rotate 5 Sec Video Out Rotate 3 Sec Pop up Duration 4 Sec Set up current data Select the camera channel to set by using LN FR CE TAL button 6 2 1 Camera Movement Setup 1 Setting of movement detection domain Designate position by clicking or dragging mouse on the image in order to check if movement occurs on the camera input image Select all Set the entire domain of screen to the movement detecting domain Cancel the movement detecting domain designated on the screen 2 Movement detection sensitivity setup a Insensitively Sensitively Motion Sensitivity It is possible to adjust sensitivity by clicking sli
32. ided screen control Used for environment setup mode conversion of the server connected to network image storage and Used for screen automatic conversion pursuant to divided screen Displays the list of server connected to network Displays the list of image channel Used for pan tilt control of the server connected to network Displays remote image input status of image channel displays on screen Used for audio communication Used for sensor alarm control of the server connected to network Displays remote image input status of image channel displays on screen 8 1 Divided Screen Control Pressing screen division button on the web client software monitoring screen changes division type shown on the screen Basic usage method is same as DVR system Pressing screen division button on monitoring screen changes image type of outputted screen Remotely monitors the selected one particular channel only Gi EH El Ed EH Remotely monitors 4 channels by dividing channel screen into 4 parts e g 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Monitors 6 channels by dividing channel screen into 6 parts e g 1 2 3 4 5 6 7 8 9 10 11 12 11 12 13 14 15 16 Monitors 8 channels by dividing channel screen into 8 parts e g 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Monitors 9 channels by dividing channel screen into 9 parts e g 1 2 3 4 5 6 7 8 9 8 9 10 11 12 13 14 15 16 Monitors 16 channels by dividing channel screen into 16 par
33. il when system error 6 3 1 Setting of alarm output and camera preset movement pursuant to sensor input It is possible to make setting so that alarm output and camera may be operated if sensor input is detected when system is composed as shown in the following figures E 4 4 4 ema bien 1 Send Oat Be mel Ou z Pw nabO ot 4 feuse y 1 E j H Ceaser i Cam m I n mw 8 bean ro 4 Cama ua 2 42226 rs i gt Cori It operation of number 1 sensor is detected it is possible to operate digital output number 1 for 60 seconds proceed with continuous recording regardless of recording method where camera number 1 is currently operated and then move to the position where preset position number 1 is set Sensor In Sensor Sensor2 Sensor3 s A Click the e AM za button in number 1 sensor in order to select input channel The selected sensor changes to type lt is possible to edit text in order to memorize the position of sensor NO Normal Open and NC Normal Close shall be exactly understood and set for normal operation of sensor Click button in number 1 digital output in order to select channel The selected digital output channel changes to type Set output maintaining time at second unit by using button Click button and continue to press it then setup time is changed Set time at 60 seconds If operation is detected at the number 1 sensor named senso
34. led SMTP server to your dvr system User ID Type the user ID Account name of e mail server if authentication is required e g master Don t type user ID if you installed SMTP server to your dvr system Password Type the password of e mail server if authentication is required e g Don t type password if you installed SMTP server to your dvr system sender Address Type the e mail name of sender e g dvrsyst dvr com Receiver Address Type the e mail name of each recipient seperating names with a semicolon e g master yahoo com dvrsupervisor empas com Interval of sending Select e mail sending interval in second unit CNB SMTP server software doesn t work on Wndows95 98 se and ME In use of mail server by installing CNB SMTP server some reception of mail accounts address can be blocked hanmail net empas com etc If the mail is unauthorized IP mail not domain this can be classified as spam and blocked In that case you need to unblock spam filter from your email supervisor WE 6 4 Audio Setup This is a part set to record image and audio simultaneously Separate hardware equipment such as sound card etc shall be installed in order to record audio System Setup JE X 16 General x Camera Motion D 140 ch Audio e Schedule e Network ge User Storage e Prz Record Channel Ge Audio IN Camera dei TE Audo2 Audo3 Audo4 Audo5 AudoB Audio Audo8
35. mage channel in regular order from number 1 Example 1 gt 2 gt 3 gt 4 Channel screen is divided into 4 sections and the 4 channels are monitored as moving picture Example 1 2 3 4 5 6 7 8 Channel screen is divided into 6 sections and the 6 channels are monitored as moving picture Example 1 2 3 4 5 6 7 8 9 10 11 12 11 12 13 14 15 16 Channel screen is divided into 8 sections and the 8 channels are monitored as moving picture Example 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Channel screen is divided into 9 sections and the 9 channels are monitored as moving picture Example 1 2 3 4 5 6 7 8 9 8 9 10 11 12 13 14 15 16 Channel screen is divided into 10 sections and the 10 channels are monitored as moving picture Example 1 2 3 4 5 6 7 8 9 10 7 8 9 10 11 12 13 14 15 16 Channel screen is divided into 13 sections and the 13 channels are monitored as moving picture Example 1 2 3 4 5 6 7 8 9 10 11 12 13 4 5 6 7 8 9 10 11 12 13 14 15 16 Channel screen is divided into 16 sections and the 16 channels are monitored as moving picture Example 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 QEH Ed BE E EJ B LL 2 3 Full Screen Function Click this button to display full screen without other functional buttons on the screen Double click the desired image window in order to return to the original status It you want to view one screen by enlarging into entire screen click the left button of mouse after selecting the d
36. n Designate thickness of pen in order to set search domain on screen basic thickness Designate thickness of pen in order to set search domain on screen basic thickness X2 Designate thickness of pen in order to set search domain on screen basic thickness X4 Set search domain on screen Remove the search domain set on screen partly Set entire screen into search domain Cancel search domain set on screen totally Designate the domain which wants search on screen by dragging mouse Start search by pressing v SEARCH Cri 3 2 Backup Data Search and Play This is a function to search regenerate the backup data on the external type of hard drive CD etc t tilt 3 2 1 Backup Data Search 1 Search drive selection LE EN E RecordData a CO USUY3U 3 031001 a E usiuus Ge D E 9 F Select movable HDD CD R CD RW etc which is connected to system Select drive and then select date 2 Selection of date and channel GC GC ReccrdCata 3 033930 3 031001 2 031007 01 E 0z Sg oz 04 Select drive and then click and select date Red color date indicates that data exists in the selected drive White color date is a date set on system Select camera channel to search The figures are channel number under date The searched data list appears as shown in the followings C Start Time End Time l Frame O o 2003 08 14 00 46 58 01 00 02 704 NO REC O o 2003 08 14 01 00
37. n regular order according to the time set at 5 Camera name input It is possible to designate the name of camera displayed on the screen at monitoring mode Input 5 or less Korean letters and 10 or less English letters ida Ou Fulde lt 3 gt Se ae iv Output the name of set camera on the screen at monitoring mode 7 Recording resolution setup Resolution 320240 E 20240 640240 640x480 L Display camera It is possible to adjust resolution of recorded image Basic value is 320 240 and 640 240 has excellent image quality but low storage speed In case of having changed resolution movement detection domain shall be set again Brightness Contrast Sharpness Jara It is possible to adjust quality of image recorded according to the site situation 6 2 2 Camera record Frame Setup It is possible to check the number of total frame supported by the system and the remaining frame and then allot it arbitrarily In designating the number of frame and displayed in a same speed by channel with a maximum speed But BDS4824 BDS4812 is displayed in a full speed and this can designate the recording and the transmission speed within a capture frame range Left 29 A Default It is possible to check camera channel through the figure written in the left side and then adjust the number of frame per second for each channel using left right direction button This shows the number of remaining frames
38. o FA Schedule Ss Network User Storage f PTZ T ANUS NAN lt Camera Contro Address Setting PTZ Model CNB PTD302 y Conenction Port co M 1 Y PTZ Speed seno Y RX Address 3 Conn ei PTZ Speed Angle Pan Tilt Zoom Focus 7 L Limit PanTilt Range 6 8 1 PTZ Connection Select the camera channel to which pan tilt driver is connected using the upper button Select kind of PTZ from PTZ model item Select connection port PTZ speed and RX address Click When connection is normal zoom and focus button is activated It is possible to select pan swing and tilt swing function 6 8 2 Preset Function Preset function can be performed only in case of being supported by pan tilt driver 1 Preseting Move camera to the desired position and then click number with PTZ connected A total of up to 10 items can be set and number button color changes after function is set cris 2 Preset position check Set position number from the list as shown in the figure below and then click button for movement Ci La 5 ls 7 8 La o n d 3 Preset cancel In the same way as position checking method set position number and then click button 6 8 3 Speed angle adjustment It is possible to set pan speed tilt speed zoom speed and focus speed supported from PTZ Move camera to the desired position with PTZ connected
39. r We recommend you to update driver to the latest version because a old driver may not properly run Screen Resolution 1024 x 768 16bit or 32bit DirectX 7 0a or higher 2 Monitoring Storage Mode Display mode is default mode It displays real time images coming from cameras and you can select search PAN TILT control setup mode CO amp O 0 D Cloris D Current date time week and HDD usage space are displayed in percentage 2 This is used in controlling divided screen Used for search mode conversion environment setup and screen capture This is used in converting screen automatically pursuant to entire screen enlargement divided 4 screen Access and connection status of network client is displayed Used for PAN TILT control Displays camera input status Displays alarm output status Displays sensor input status Adjusts speaker volume 4D Log On Log Off Exit Program It is possible to check current operation status using text and icon which are displayed on the left right upper side of screen amp amp 9 9 C3 6 Displayed in red color when recording is under progress Displayed in green color when recording is not under progress This is a name of camera set at environment setup See environment setup gt camera Displays the status under recording together with audio This is an icon which displays continuous recording status set in environment setup Types of icon for ea
40. r1 in the content set until now digital output channel number 1 named alarm1 is operated for 60 seconds Camera Preset 01 4 amp WN Ii If sensor input happens at camera preset set number 1 camera to record Because number 1 camera was installed at pan tilt driver normal operation is performed only by setting preset at Setup gt PTZ tap Select preset number set at the right side items Now we finished interworking of external device for detecting operation of number 1 sensor Digital Qut Duration Time Sensor In Sensor Sensor 1 2 g 3 Sensor3 4 Sensord Digital Dut Duration Time Camera Preset EEE a wh UI Cri 6 3 2 Wave output If movement happens at the movement sensing domain designated at Camera Motion tap designate WAV file to output to external speaker When WAV file has been designated it is possible to check output by pressing button 6 3 3 E mail alarm If image e mail issue has been selected at Camera Motion tap e mail including image is issued to the designated receiver If you forgot password for log in e mail including Administrator s Password is issued to the designated receiver by pressing password button EXIT SYSTEM Password Exit Program Reboot Shut Down Minimize E mail Server SMTP Type the address of e mail server SMTP e g smip mail yahoo com Type 127 0 0 1 into the E mail address if you instal
41. rate of CPU occupancy slow down video streaming thru network especially thru WAN It improves streaming capacity but can slow down recording speed on hard disk Slow downed recording may occur especially in a system of low performance that doesn t have enough resource to perform streaming and recording at a time 2 LAN setup Setup is performed so that outside access may be possible using client program 3 MODEM ISDN setup Modem setup is a function added newly System shall be furnished with modem in order to provide access service through modem However problem Cori may occur due to very low speed as compared to the speed provided during Ethernet communication when using modem 4 Network Port setup Using default port setting is recommandded but you can change the port if it is necessary 5 Web Monitoring setup Web monitoring requires installation of web server software on DVR system This option enables users to monitor from a remote place thru web browser e g Internet Explorer For technical terms or details your Internet Service Provider ISP will help you Public IP Subscriber IP Address 211 000 000 62 Subnet Mask 255 255 255 0 Default Gateway 211 000 000 254 gt Gs Web Monitoring I E v Support Web Viewer Primary DNS server 158 126 63 1 C Proxy Setting Secondary DNS server fe Ds Us Y Imm Web Server Port 80 Check on Support Web Viewer You can input
42. rder to connect selected servers in regular sequence PC cori 7 7 Cancellation of Network Connection This is used in disconnecting a selected one of connected DVH servers This is used in disconnecting all the connected DVH servers 7 8 DVR Auto Connection This button maintain connection between DVR and Client software by trying to reconnect when disconnected You can enable this function by checking on Auto Connection in Detail Setup Reconnection is applicable only to the selected DVRs 7 9 Monitoring of Remote Image 7 9 1 Configuration of Remote Image Monitoring Screen Select the system to output image on screen with network connected to DVR server If multiple connection is set click the button in order to select system button in order to output camera list connected to selected system Select camera channel to be displayed on screen from outputted list and then double click mouse sothat empty place may appear on the divided screen In case of being connected to several servers 36 screens may be re configurated while repeating the above operation Double click the camera indicating that output is under progress on the list in order not to output the image composed on divided screen so that screen may disappear Camera Status ex Cd Normal camera input No camera input Normal camera input and outputting on the current screen AG amp DROP function supported The function de
43. scribed above can be used as mouse drag and drop function as well 7 9 2 Remote Control It is possible to click and move tap as shown in the figure below in order to check sensor input status of connected system or control alarm output Ex 01Camera Eu Di Camera Ex 02Camera Ty 02Camera TY 3Camera T 4Camera T OSCamera KO 6Camera Ex 7Camera y Camera e ecamera T 10Camera TY 1 1Camera Ex 12Camera g 13Camera gr 14Camera Ex i5Camera Ga l Camera Ex 16Camera 7 9 3 Image Channel Entire Screen Click button in order to expand particular channel into entire screen at the channel shown on the current divided screen 7 10 Storage of Remote Monitoring Image Stores the image being outputted on the current divided screen into the disk as MPEG file Stored position is C RecordData 7 11 Search of Stored Data Select the system to search stored data with network connected to DVR server Select system by clicking button if multiple connection is set Click search button When dialogue appears click yes The same search screen as DVR server appears Remote search does not support panorama function and quick search function METE ICE Smar Ws Ma tor v 2 sewer TUe vs be ES eh SETUF m Dc vou visni tc search ie mcle v deo Clicking this button shows a dialogue will you search remote video clicking yes performs remote search and clicking no searchs the video stored in the
44. set OSD 4 1 Camera mE m OSD menu with direction key for controlling pan tilt drive control it OSD appears Control 4 2 Pan Tilt Direction Control It is possible to Camera can be moved by clicking the desired direction button in order to adjust up down left right position of camera connected to Pan Tilt driver It is possible to set cancel auto pan function using middle button Focus Control It is possible to have zoom in out and focus adjustment function depending on kinds of camera connection to Pan Tilt driver 4 3 Zoom It is possible to adjust zoom and focus of camera by clicking on 4 4 Preset Operation O Preset operation is a function with which user can move to the preset position User can set it arbitrarily at pan tilt setup of environment s tup mode After setting position uesr can directly select the stored position number using button and then directly move by clicking button at pan tilt Equipment Control control mode 4 5 Light button can turn on off the lamp connected to housing Power button can turn on off Periphera power inputted to camera This function is affected by kinds of Rx receiver Power On Off Light L IWE 5 Screen Output Function This is a button to set so that the image of currently outputted screen may be captured and then outputted Clicking screen output function button changes shape of mouse cursor to Putting the changed mouse cursor on the
45. speaker connected to the system Gr 3 Search Mode Click this button on the display mode 3 1 Play of Stored Data 3 1 1 Select Date Playback Channel and Time 2004 Sun Mon 1 12 13 14 15 16 18 mg 20 ja 22 23 2 25 26 27 28 29 30 3 CO EE CO ESO CC AN cori Select the desired month from the calender shown on the screen The date described in red color indicates that there is stored data Clicking the desired date button displays the stored time for each camera If there is no stored image at each time it is displayed as empty screen Selecting and clicking the time band to be regenerated with mouse shows new red color line Identification of color on the stored image e Play channel selection Select the camera channel to be regenerated CAM 1 CAM 4 Clicking the button where the camera number to select is displayed with mouse makes selection It is possible to select cancel camera during play 00 01 02 035 04 05 06 07 08 09 10 11 12 13 14 15 16 1 al 05 Yellow Displays the continuously recorded image Green Displays the movement recorded image Blue Displays the recorded image when sensor input happens Gray Displays the case where the recorded image is cancelled by disk over writing backup 3 1 2 Play of Search Image Moves to start frame Moves to the last frame Moves by one frame into the reverse Moves to play direction by one frame direction of play Regenerates
46. to Clicking mouse at the desired part enlarges image This is a function to reduce particular domain of enlarged image Pressing button and then moving mouse to the upper side of output image change the shape of cursor to Clicking mouse at the desired part of enlarged image reduces image to the original status Cr 7 Play of single channel screen Double click mouse after selecting channel in order to regenerate it into single screen during selection and play of several channels 8 Enlargement of entire screen This is a function which can be used during play only into single channel screen which performs a digital zoom function on the entire screen 3 1 3 Panorama play This is a function to regenerate image in regular order as time passes at divided mode If play is under progress at multi channel type select one channel and then change it into single channel screen Press panorama button at regenerated status dates 1 Hr quon onam Gr 3 1 4 Motion Search Quick Play a LE is possible to detect only the image where movement occurred by designating particular position at the image under play If play is under progress at multi channel type select one channel and then change it into single channel screen Press quick search button at play status The initial start part image of selected channel appears in order to set domain Select thickness of pen in order to set search domain using the next butto
47. ts e g 1 2 3 4 5 6 7 8 9 10 7 8 9 10 11 12 13 14 15 16 8 2 Automatic Conversion Button Pressing this button with screen division set can output monitoring image by changing camera channel in regular order Click button again in order to stop automatic conversion function Client cannot adjust automatic conversion time interval separately which is set at 5 seconds cris 8 3 Monitoring of Remote Image button in order to output camera list connected to the system Select camera channel to be displayed on screen from outputted list and then double click mouse sothat empty place may appear on the divided screen Double click the camera indicating that output is under progress on the list in order not to output the image composed on divided screen so that screen may disappear Camera Status Cu e Ex Normal camera input No camera input Normal camera input and outputting on the current screen AG amp DROP function supported The function described above can be used as mouse drag and drop function as well 8 3 2 Remote Control You can check sensor input status of connected system or control alarm output 8 3 3 Image Channel Entire Screen Click button in order to expand particular channel into entire screen at the channel shown on the current divided screen Cri 8 4 Storage of Remote Monitoring Image Stores the image being outputted on the current divided screen into the disk as M
48. up This is an item to designate basic matters so that system may be connected to network System Setup A KJ General EN Camera Motion CY 1 0 M Audio 2 Schedule Network E User Storage e PTz Si Network Set H Site Connection Cade Bandwidth Send Priority 100 001 no LIMIT v High LJ Normal IP Address Subnet Mask Default Gateway 211 000 000 62 Bons EE T 211 000 000 254 Primary DNS server 168 126 63 1 Web Monitoring O Support Web Viewer O Proxy Setting Secondary DNS server 0 0 0 0 EZ AAA Web Server Port 8 BSS Network Ports 5 Connect Port TCP 7074 Audiol Port UDP 49557 Video Port TCP 7076 Audio2Port UDP 49559 Audio Port TCP 70755 Media Server TCP 7077 rotes 1 System network setup Setup is possible only in case that system is connected to network environment Site access code is a very necessary item in case of having access using client program Transmission band width limit Speed Limit This is a function of limit so that transmission may be executed within certain band width when transmitting client data at DVR Applicable bandwidth is 56Kbps 128Kbps 256Kbps 512Kbps 1 544Mbps 2 048Mbps Ethernet NoLimit Send Priority High Normal options available High checking on this option decreases streaming delay or cut out when high
49. which remains after being allotted for entire frame and each channel supported by the system Pressing initialization button inputs general average value HD Record lt 2 gt Sending lt 2 gt Display 7 ek Set up the number of recording frame for the image channel setting is available Recording speed within capture speed Set up the number of transmission frame for the image channel channel setting is Transmission speed available within capture speed Display speed Displaying speed for the image channel Reference Setting Level Value Image CIF size In case of normal motion Line bandwidth 1Mbps Setting the overall transmission frame within 30 frame 256Kbps Setting the overall transmission frame within 7 frame In case of minor motion Line bandwidth 1Mbps Setting the overall transmission frame within 60 frame 256Kbps Setting the overall transmission frame within 15 frame Gr Network transmission can be delayed in case of lack of operating performance system In this case if the transmission priority makes high delay in receiving can be reduced The setting way of transmission speed is to set up the line speed of the network setting as NO Limit and then adjust the number of the transmission frame Set up the use speed properly corresponding to the bandwidth in setting the speed If the setting is over the limit of bandwidth for frame transmission image can be delayed or hung System
Download Pdf Manuals
Related Search