Technical Description EOSINT M 280 Technical description
Contents
1. Electrically heated chamber furnace type H 41 H with controller C 250 Furnace chamber size w x d x h 350 x 500 x 250 mm External dimensions w x d x h 840 x 1100 x 1320 mm Weight 260 kg Electr connection 15 0 kW Connection voltage 400 V Tmax 1280 C Protective gas annealing box with protective gas connection Charging plate for N 41 H Charging trolley CW 1 This equipment can be ordered directly from the following supplier Nabertherm GmbH www nabertherm de Bahnhofstr 20 Tel 49 0 4298 922 0 D 28865 Lilienthal Bremen Fax 49 0 4298 922 129 SW 12 2010 30 33 75 10 Services 10 1 Set up and installation 10 1 1 System EOSINT M 280 The system price includes set up and installation at the customer s site according to given specifications For set up and installation requirements see the corresponding machine specific Installation Conditions available from EOS The qualification and commissioning of the system for one powder material by our service personnel is included in the system price The qualification and commissioning for additional materials requires approximately one day of service work per material if ordered at the same time Each material qualification uses typically two building platforms and a small amount of the relevant metal powder 10 1 2 Software Installing the EOS RP Tools from CD ROM can easily be done by the user To run the installation local administrator ri2. die casting moulds for small series of up to several ten thousand parts in light alloys direct manufacture of parts for engineering applications including functional prototypes small series products individualised products or spare parts SW 12 2010 10 33 4 3 EOS StainlessSteel GP1 EOS StainlessSteel GP1 is a pre alloyed stainless steel in fine powder form Its composition corresponds to US classification 17 4 and European 1 4542 This kind of steel is characterized by having very good corrosion resistance and mechanical properties especially excellent ductility and is widely used in a variety of engineering applications Typical applications engineering applications including functional prototypes small series products individualised products or spare parts parts requiring high corrosion resistance sterilisability etc parts requiring particularly high toughness and ductility 4 4 EOS StainlessSteel PH1 EOS StainlessSteel PH1 is a pre alloyed stainless steel in fine powder form Its composition corresponds to US classification 15 5 and European 1 4540 It offers very good yield strength ultimate tensile strength and hardness already as built and can be easily post hardened to further increase all of these properties Typical applications engineering applications including functional prototypes small series products individualised products or spare parts parts requiring particularly hi
3. Technical description Status December 2010 1 EOSINT M 280 f The machine comprises a process chamber with recoating system elevating system and platform heating module an optical system with laser a process gas management system a process computer with process control software and a set of standard accessories The machine components are integrated into a robust machine frame During operation the process chamber is secured by interlock Requirements of laser safety class 1 are met When closed the control cabinet s specifications correspond to IP 54 The system carries the CE designation Robert Stirling Ring 1 D 82152 Krailling bei M nchen Telefon 49 89 893 36 0 Telefax 49 89 893 36 285 Internet www eos info HypoVereinsbank SWIFT IBAN SWIFT IBAN IBAN DZ Bank AG HYVEDEMMXXX DE81 7002 0270 0044 6197 50 GENODEFF 701 DE97 7016 0000 0000 1357 22 DE67 7016 0000 0020 1357 22 Gesch ftsf hrer Peter Klink Registergericht Dr Hans J Langer Johann Oberhofer M nchen HRB 87386 USt Id Nr DE 12 933 9753 1 1 Basic data dimensions w x d x h 2200 mm x 1070 mm x 2290 mm weight approx 1250 kg without powder mains supply three phase system 400 V 6 10 at 50 60 Hz mains fuse protection 3x32A maximum power consumption incl cooler 5 5 kW compressed air supply 7 000 hPa 20 m3 h argon supply 4 000 hPa 100 l min min argon purity purity 9
4. CobaltChrome SP2 see EOSINT M 270 Dental Package EOS Titanium Ti64 Argon EOS Titanium Ti64 ELI Argon EOS Titanium TiCP Argon EOS NickelAlloy IN718 Argon EOS NickelAlloy IN625 Argon EOS Aluminium AlSi10Mg Argon Notes All materials in the table above are fully released means tested and qualified for EOSINT M 280 systems default parameters included in PSW part properties documented in Material Data Sheet powder available as a series product and application support available Most other materials such as nickel alloys and steels can also be processed under argon atmosphere SW 12 2010 15 33 5 Building platforms The parts are built on a building platform which can either be integrated into the part e g for tooling inserts or separated from the parts after the building process In the latter case the platform can normally be reused many times by remachining the surface DirectBase building platforms are 250 x 250 mm in size to fill the build area and are attached to the carrier plate in the process chamber by four corner screws They are available in various materials and specifications as summarized in the table below Fig Building platform DirectBase TS36P Name Material Thickness Features DirectBase S22 1 1730 steel 22mm _ ground surface 8 mm fixation holes DirectBase S36 1 1730 steel 36mm _ ground surface 8 mm fixation holes DirectBase TS36P 1 2083 steel 3
5. Material Data Sheets for further details 2 3 Parameter sets using 400W laser EOSINT M 280 with 400W laser offers now also further Speed and TopSpeed parameter sets Following parameter sets are available for EOSINT M materials with 400W laser EOS Parameter Sets Layer thickness MS1_Speed 1 0 40 um MS1_TopSpeed 1 0 80 um GP1 Speed 1 0 40 um PH1 Speed 1 0 40 um MP1 Speed 1 0 40 um Ti64 Speed 1 0 60um AlISi10Mg Speed 1 0 30um IN718 Speed 1 0 40um IN625 Speed 1 0 40um 2 3 1 Speed This parameter set Speed offers an optimal compromise between production speed and surface quality using 400W laser SW 12 2010 7 33 2 3 2 TopSpeed High productivity parameter set for the production of parts or tools e g 80pm layer parameter sets offer high volume rate with 400W laser Note all these parameter sets produce fully dense parts with comparable mechanical properties see Material Data Sheets for further details 3 IQMS Module EOSTATE EOSTATE is a status control and reporting software It was developed to provide the user with a simultaneous overview of all production related data of different machines in a local net at any desired point in time The software processes production data for freely definable timeframes and displays it clearly Furthermore all relevant and monitored data are linked to build jobs as well as parts and can therefore be represented clearly The different requirements of user and customer are acco
6. a broad range of e Manufacturing applications as summarized below Please refer to the relevant material data sheets for further details Further materials are continuously being developed Please ask for the current status 4 1 DirectMetal 20 DirectMetal 20 is a very fine grained bronze based multi component metal powder The resulting parts offer good mechanical properties combined with excellent detail resolution and surface quality Typical applications injection moulds and inserts for moulding up to a few tens of thousands of parts in all standard thermoplastics using standard injection parameters direct manufacture of functional metal prototypes 4 2 EOS MaragingSteel MS1 EOS MaragingSteel MS1 is a maraging steel in fine powder form Its composition corresponds to US classification 18 Maraging 300 European 1 2709 and German X3NiCoMolTi 18 9 5 This kind of steel is characterized by having very high strength combined with high toughness It is easily machinable after the building process and can be easily post hardened up to approx 55 HRC by a simple thermal age hardening process This kind of steel is conventionally used for complex tooling as well as for high performance industrial parts for example in aerospace applications Typical applications heavy duty injection moulds and inserts for moulding all standard thermoplastics using standard injection parameters with achievable tool life of up to millions of parts
7. shot peening is a post processing method which enables the surface quality to be significantly improved very quickly and easily both for direct use and as a basis for further polishing It is strongly recommended for all materials Depending on the application the following packages are recommended Detailed recommendations for certain applications are included in the Application Notes Surface finishing of DMLS parts For applications which demand a high metallurgical purity for example medical implants it is necessary to carefully consider which peening media to use and how to handle the parts Please note that EOS does not supply consumables or spare parts except as part of these SW 12 2010 28 33 75 packages Such products should be ordered directly from the manufacturer lepco www iepco ch or their local representative Contact details can be provided on request 8 4 1 Shot peening basic package For most DirectIool and DirectPart applications it is sufficient to compact and peen with the following basic package 2 shot peening systems IEPCO Peenmatic 750S each with rotary table 1 fine nozzle Micropeen 250 integrated into one of the Peenmatic 750S 5 kg shot peening medium IEPCONORM A test quantity 25 kg shot peening medium IEPCONORM B 4 25 kg shot peening medium IEPCONORM C 8 4 2 Shot peening upgrade package Micropeen 250 For fine slots which are not accessible with lepconorm B 4 the finer lepconorm B
8. 2 can be used together with a Micropeen 250 fine nozzle In this case care should be taken to avoid damaging other surfaces due to the more abrasive nature The corresponding upgrade package comprises 1 fine nozzle Micropeen 250 console for mounting on the second Peenmatic 750S shot peening system 25 kg shot peening medium IEPCONORM B 2 8 4 3 Shot peening premium package To achieve the best quality with injection moulding inserts we recommend the steps of cleaning compressing peening and polishing with the Premium Package comprising 3 shot peening systems IEPCO Peenmatic 750S each with rotary table two of which with fine nozzle Micropeen 250 25 kg shot peening medium IEPCONORM A 25 kg shot peening medium IEPCONORM B 4 25 kg shot peening medium IEPCONORM C SW 12 2010 29 33 75 9 Shot peening dental package To achieve the best quality with dental restorations we recommend the step of cleaning with the Dental Package comprising 1shot peening systems IEPCO Peenmatic 750S each with rotary table 25 kg shot peening medium IEPCONORM C 9 1 Thermal post processing Depending on the material and application a thermal post processing can be advisable for example for hardening or stress relieving This is especially recommended for the EOS StainlessSteel MaragingSteel CobaltChrome and Titanium materials Detailed recommendations are available on request For these materials we recommend the following equipment
9. 6mm _ ground surface 8 mm fixation holes reference positioning holes undercuts for Platform Handling option DirectBase Ti25 TIGAI4V 25mm machined surface 8 mm fixation holes DirectBase AL30 Aluminium 30mm machined surface 8 mm fixation holes Recommendations for use When using EOS Titanium materials DirectBase Ti25 platforms are recommended When using EOS Aluminium AlSi10Mg DirectBase AL30 platforms are recommended When using EOS MaragingSteel MS1 material for heat treating parts whilst still on the platform it is strongly recommended to use 1 2083 platform material DirectBase TS36P When building heavy jobs it is recommended to use platforms with undercuts in combination with the Platform Handling option DirectBase TS36P See section 6 3 2 for details of the Platform Handling option When building large or massive parts it is recommended to use thicker platforms e g 36mm When building hybrid tools with EOS MaragingSteel MS1 we can only recommend 1 2709 steel as best suitable perform alloy SW 12 2010 16 33 6 Data preparation Pre processing of CAD data is necessary to create the SLI data which are required for the build process The main requirement is the conversion of three dimensional 3D structures into a sequence of two dimensional 2D layers called slices Further requirements depend on the individual process chain from CAD design to the build process and may i
10. 9 998 argon Argon 4 8 Full details including required floor space connections and environmental requirements temperature and humidity range etc are given in the Installation Conditions 1 2 Optical system The optical system creates and positions the laser beam to fuse melt or otherwise solidify the powder material The laser emits a laser beam which is guided by an optical fibre a beam expander optic the scanner mirrors and a focussing objective All optical surfaces have special coatings to guarantee effective beam guidance 1 2 1 Laser Yb Ytterbium fibre laser wavelength 1060 1100 nm nominal power 200 W or 400W optional SW 12 2010 2 33 1 2 2 Scanner The scanner is a high speed scanner unit comprising precision galvanometer scanners with temperature compensation actively cooled ultra high reflection mirrors integrated servo and interface electronics digital data transfer from the system s control computer and digital signal processing It also incorporates an integrated home in sensor which detects and corrects any scanner drift at regular intervals A high positional stability of the laser beam is thereby maintained even under varying environmental conditions or with high thermal loading due to long exposure times and large building jobs exposure area 250 mm x 250 mm exposure speed up to 7000 mm s repeatability scanner position lt 11 urad 1 2 3 Focussing objective The focussing obj
11. art building Note the PSW Off line must always be the same release as the PSW installed on the machine SW 12 2010 18 33 6 3 Materialise Magics RP Magics RP is a software package for data pre processing based on STL data It is available for all current Windows operating systems and covers the needs of data pre processing for EOSINT Systems visualisation of parts in STL format process compatible placement of parts repairing and editing functions quality assurance of STL files reinforcements and supports depending on part geometry and technology using additional module SG or volume SG import of IGES VDA CATIA and Unigraphics data using additional modules 6 4 EOSTYLE EOSTYLE is a software package for advanced support generation It has been programmed by Materialise exclusively for EOS and is strongly recommended for any EOSINT M customers who wish to build positive parts DirectPart application or loose inserts for tooling EOSTYLE includes the features Angled Supports can support overhanging surfaces from the side Improved Tooth Design minimizes surface defects when breaking away supports Radius Function improves the bonding of supports to the platform especially for DirectMetal 20 Optimized Block Support with definable orientation and fragmentation for easier and quicker removal Advanced Gussets reinforced gusset supports with definable angle Gap Support enables contactless sup
12. ective is a so called F theta objective which focuses the laser beam onto a flat field Below the F theta objective is a protective glass with a pneumatic lens protection device which prevents dirt settling on the lens surface The laser beam focus is automatically switched between two pre defined sizes during the exposure using a dual focus system a fine focus is typically used for accurate exposure of contours and a broader focus for fast exposure of larger areas The sizes are manually selected according to the material being used diameter of laser beam at building area variable 100 500 um focal length of F theta flat field lens 410 mm 1 3 Recoating and elevating system The recoating system creates the layers of powder It comprises a recoating element a recoater arm and a linear drive which moves the recoater arm in the horizontal direction Different options are available for the recoating element For titanium aluminium and nickel alloys materials a high speed steel HSS blade is recommended For other materials a wear resistant ceramic blade is recommended positioning speed 40 500 mm s The elevating system comprises dispenser building and collector systems The building system moves the platform carrier in the vertical direction The part is built on a building platform which is mounted to the platform carrier SW 12 2010 3 33 The building platform carrier has a three point mounting and two mot
13. gh strength and or hardness 4 5 EOS CobaltChrome MP1 EOS CobaltChrome MP1 is a fine mixture of pre alloyed powders which produces parts in a cobalt chrome molybdenum based superalloy This class of superalloy is characterized by having excellent mechanical properties strength hardness etc corrosion resistance and temperature resistance Typical applications biomedical implants e g spinal knee hip bone toe etc note subject to fulfilment of statutory validation requirements where appropriate e g for commercial use as a medical device in most countries SW 12 2010 11 33 parts requiring high mechanical properties in elevated temperatures 500 1000 C and with good corrosion resistance e g turbines and other parts for engines cutting parts etc parts having very small features such as thin walls pins etc which require particularly high strength and or stiffness 4 6 EOS CobaltChrome SP2 EOS CobaltChrome SP2 is a Co Cr Mo and W based alloy in fine powder form for production of dental restorations in EOSINT M 270 system Its composition corresponds for type 4 CoCr dental materials in EN ISO 22674 2006 standard The resulting parts also fulfil the chemical and thermal requirements of EN ISO 9693 for CoCr PFM porcelain fused metal of dental materials Ni content lt 0 1 no Cd or Be and requirements of EN ISO 7504 EN ISO 10993 1 2003 and EN ISO 10993 5 1999 regarding the biocompatibility and cy
14. ghts are required The operation language can be selected between German English French or Italian The use of the software is protected by a password provided by EOS The installation of Magics RP from CD ROM includes EOSTYLE also requires administrator rights and can be done by the customer The license password is provided by Materialise 10 2 Documentation 10 2 1 System EOSINT M 280 Full documentation in accordance with CE conformity is provided including Installation Conditions Operation Troubleshooting Maintenance and Spare Parts Software Reference PSW Accessories and Options SW 12 2010 31 33 10 2 2 Software EOS RP Tools is provided with a user manual according to CE The manual can be delivered in German English French and Italian language immediately for other languages please ask for delivery time and costs Materialise Magics RP is provided with a user manual and a comprehensive online help in German or English language to be selected during installation The operation language is English or German also to be selected during installation EOSTYLE module in Magics SG contains a separate online help 10 3 Training 10 3 1 System EOSINT M 280 To ensure that the machine is operated properly basic training for operation of machine its accessories and operating software are included in the purchase price Basic training includes technology basics machine use handling of accessor
15. he EOS specific SLI format required for the subsequent building process Layer data of solid bodies can be separated into skin and core data to facilitate process optimisation The EOS RP Tools consists of the modules SLIVIEW graphical user interface for visualising layer data SLICER generates two dimensional layer data out of three dimensional STL data SLIFIX automatic repair of the most common data errors in layer data such as overlaps double contours and inverted polygon orientation SKINCORE separates massive part data into one data set for a definable Skin and a Core on a two dimensional basis Note with PSW V3 2 and higher this functionality is also included in the PSW SLICONV automatic data conversion from CLI to EOS SLI and vice versa either ASCII or binary RADIUS creates a fillet radius between the upper surface of the building platform and the part to improve the platform part connection and allows generation of a Skin amp Core structure which is open to the building platform Note with PSW V3 2 and higher this functionality is also included in the PSW data input format STL CLI ASCII or binary EOS SLI data output format EOS SLI CLI ASCII or binary 6 2 EOS PSW Off line The PSW Off line comprises a second licence for the process software PSW to be operated on a separate PC This enables jobs to be prepared without using the machine PC thereby enabling maximum utility of the EOSINT system for p
16. ies process description and control data pre processing EOS RP Tools part fabrication post processing finishing of parts for one powder material e g EOS MaragingSteel MS1 Basic training for up to three participants lasts five days and is held at EOS GmbH s premises in Krailling Germany If more than one powder material is ordered additional training may be necessary available by agreement About 4 to 6 weeks after installation a one day start up visit at the customer s site can be made A training manual in English language is handed out to the participants A basic knowledge of PC operation including Microsoft Windows is a prerequisite for the basic training SW 12 2010 32 33 Upon special agreement EOS GmbH is pleased to offer its customers additional training or workshops to gain deeper knowledge about the process chain and its optimisation 10 3 2 Software Due to the comprehensive user manual training for EOS RP Tools is not necessary Customers purchasing the software with an EOSINT M 280 will get an introduction into the use of the software during the basic system training Training for Magics RP and modules is provided by Materialise at its premises or at customer s site For higher efficiency it is recommended to participate in a Magics training at Materialise before starting the training course at EOS Due to the online help in EOSTYLE training is not necessary Customers purchasing
17. itted with an Erowa Powerchuck 150 To achieve this the building platform is mounted onto a pallet which fits into the Powerchuck 150 unit Clamping and releasing the clamping system is achieved via a compressed air connection with quick release connection Additional pallets can be ordered to enable several jobs to be processed on different machines at the same time The Erowa clamping system can be removed from the machine and replaced by a standard building platform at any time When using the Erowa clamping system the maximal build height is reduced by approx 98 mm compared to standard operation Position repeatability of the pallet 0 002 mm Fig Erowa Powerchuck 150 clamping system mounted in an EOSINT M system SW 12 2010 27 33 8 3 2 Platform handling trolley The platform handling trolley can be equipped with various load handling attachments for following purpose This option allows a safe and user friendly removal of build platforms from the process chamber It is especially recommended for users who build heavy jobs and or use positioning pins or the Erowa clamping system The trolley can also be used for safe and user friendly removal of used filters from the recirculating filter system 2009 version It can be also used for lifting up the liquid filled vacuum cleaner e g for emptying water Maximum load 150 kg Fig Handling trolley for platforms and filter 8 4 Micro shot peening Micro
18. ium 8 2 Powder handling equipment 8 2 1 Sieving Module Metal powder should be sieved before being reused in the EOSINT M 280 to remove any agglomerates or other large particles A sieve insert for manual sieving of powder inside the process chamber is included with the machine as standard The Sieving module is used for sieving mixing and ensuring the even consistency of the metal powder that has been conveyed from the dispenser duct building duct and collector duct on the machine using the Conveying module The Sieving Module is an external sieve which allows for rapid sieving of large quantities of material in an enclosed unit Mesh size standard 63 um other sizes possible Operating principle vibratory sieving with ultrasonic deblinding Fig Sieving module for EOSINT M 280 SW 24 33 8 2 2 Conveying Module The Conveying module is used for collecting and conveying metal powder from the dispenser duct building duct and collector duct on the machine to a powder bin The conveyor module is a compressed air driven device for metal powder it operates in steps suction time and emptying time can be adjusted to suit the type of used metal powder Conveyor capacity conveying performance vacuum max 91 91 kPa volumetric flow rate at the connection suction hose removed approx 130m3 h compressed air setting 5 5 6 bar capacity 1 5 suction time 2 30s emptying time 2 30s pe
19. mmodated within the integrated modules Basic Quality Assurance Controlling Machine Park Management and ERP Interface modules They ensure that process flows are easy to track and to manage 3 1 EOSTATE module Basic The EOSTATE Basic Module is an integral part of each system It allows the selective export of job information for the purpose of a remote diagnosis from the EOS Support Thus possible problems can be identified fast and cost efficient and solutions can be found The export file contains all reporting data of a chosen period but no geometry data Furthermore the basic module contains a status bar that enables any computer in the network to display the current process state and the building job possibly running on it 3 2 EOSTATE module Quality Assurance The optional Quality Assurance Module includes the job report and the part report These reports show in addition to the general job data and the chosen job parameters above all quality relevant information e g incidents during the building process interruptions and variations from the ideal process conditions In addition every report contains an assessment SW 12 2010 8 33 derived from that information Thus it appears at a glance whether the building process proceeded within normal parameters The job report reports about the complete building process and all parts therein included while the part report shows detailed information about selected parts In pa
20. n most countries 4 9 EOS NickelAlloy IN718 EOS NickelAlloy IN718 is a nickel based heat resistant alloy in fine powder form Its composition corresponds to Inconel 718 UNS NO7718 AMS 5662 AMS 5664 W Nr 2 4668 DIN NiCr19Fe19NbMo3 This kind of precipitation hardening nickel chromium alloy is characterized by having good tensile fatigue creep and rupture strength at temperatures up to 700 C 718 alloy has also outstanding corrosion resistance in various corrosive environments This material is ideal for many high temperature applications Typical applications Aero and land based turbine engine parts Rocket and space application components Chemical and process industry parts Oil well petroleum and natural gas industry parts SW 12 2010 13 33 4 10 EOS NickelAlloy IN625 EOS NickelAlloy IN625 is a heat and corrosion resistant nickel alloy powder which has been optimized especially for processing on EOSINT M systems Parts built from EOS NickelAlloy IN625 have chemical composition corresponding to UNS NO6625 AMS 5666F AMS 5599G W Nr 2 4856 DIN NiCr22Mo9Nb This type of alloy is characterized by having high tensile creep and rupture strength Conventionally cast or wrought components in this type of nickel alloy have typically excellent fatigue and thermalfatigue properties combined with good oxidation resistance EOS NickelAlloy IN625 is expected to have good corrosion resistance in various corrosive enviro
21. nclude repairing cutting or scaling 3D structures Applications which involve removing the built part from the building platform typical DirectPart applications require in addition the creation of supporting structures The most commonly used conversion of CAD data is to the STL format which approximates the part geometry by a net of triangles Several software packages are able to work with part data in IGES VDA FS or other formats as well C0 E jE f SLICER SLICONV SLIFIX SKINCORE CEOSINT gt An IBM compatible PC is required for this data pre processing The equipment should meet the following requirements processor RAM graphic board network interface network protocol operating system disk drives monitor gt 1 GHz Pentium IV recommended 512 MB gt 1024 MB recommended gt 128 MB recommended open GL RJ45 100BaseTX TCP IP Windows XP CD ROM 17 1024x768 true colour For additional demands e g on processor performance or RAM especially with simultaneous use of external data processing software please refer to the corresponding supplier documents Various software packages are available for data preparation on a PC as described below SW 12 2010 17 33 6 1 EOS RP Tools EOS software for generating and manipulating layer data EOS RP Tools is a software package which allows part data in STL format or in CLI format to be converted into t
22. nments Especially sea water applications require high pitting and crevice corrosion resistance stress corrosion resistance against chloride ions high tensile and corrosion fatigue strength However corrosion resistance has not been verified yet and therefore it is recommended to conduct relevant corrosion tests and studies prior to use in specific corrosive environment 4 11 EOS Aluminium AlSi10Mg EOS Aluminium AlSi10Mg is a pre alloyed Aluminium powder Its composition corresponds to AlSi10Mg which is a typical casting alloy with good casting properties for thin walled and complex casting parts The combination of Silizium Magnesium in the alloy cause improved mechanical properties and hardness This material has very good dynamic properties and is often used for applications with high load Typical applications direct manufacture of functional prototypes small series products individualised products or spare parts parts requiring a combination of high mechanical properties and low spezific weight e g structural and engine components for aerospace and motor racing application etc SW 12 2010 14 33 The operating modi of EOSINT M materials are summarized in the following table N TEP M 280 operation mode DirectMetal 20 Nitrogen EOS MaragingSteel MS1 Nitrogen EOS StainlessSteel GP1 Nitrogen EOS StainlessSteel PH1 Nitrogen EOS CobaltChrome MP1 Nitrogen EOS
23. nt monitoring of the remaining oxygen content in several places including process chamber recirculating filter system and machine frame extended safety circuit including automatic interruption of the building process if a defined limit of oxygen content is exceeded When processing reactive metals such as EOS Titanium and Aluminium powders the optional accessories wet separator liquid filled vacuum cleaner and platform handling trolley must be used For details of connections please refer to the requirements in the EOSINT M 280 Installation Conditions SW 12 2010 21 33 7 3 Dental package With this configuration the EOSINT M 270 system is set up for optimal production of dental restorations using EOS CobaltChrome SP2 material in accordance with statutory requirements for the production of these Class Ila medical devices using the CE certified material The machine hardware is set up as for the Standard package but qualified especially for using EOS CobaltChrome SP2 material This package also includes a special training for the dental application and a certificate confirming a paid up licence to certain third party patents relating to the production of dental restorations The training is obligatory due to the statutory requirements for the production of medical devices EOS recommends the use of the optional data preparation software CAMbridge with this package For details of connections please refer to the Installati
24. on Conditions for EOSINT M 270 SW 12 2010 22 33 C25 8 Options Depending on the application various post processing steps such as surface polishing may be required for which additional equipment can be needed The most relevant equipment and sources for obtaining these are summarized below Further details and recommendations of how to use such equipment are available on request in EOS Application Notes Training Manual etc 8 1 Vacuum cleaner A vacuum cleaner is used to clean the process chamber To ensure safe operation only industrial vacuum cleaners which are suited to these specific requirements meet the required safety class and have correspondingly suitable accessories should be used 8 1 1 Standard industrial vacuum cleaner This is an industrial type vacuum cleaner with bag specified for dust class H and electrically conductive accessories hose and nozzles Fig Vacuum cleaner Ruwac WSZ 2210 SW 12 2010 23 33 C25 8 1 2 Wet separator liquid filled vacuum cleaner This vacuum cleaner collects sucked in powder dust etc in liquid and therefore offers the highest safety level It is suitable for use with all EOS materials including reactive powders as well as flammable and even explosive dust When using EOS Titanium and Aluminium powder materials only this vacuum cleaner must be used Fig Wet separator Ruwac NA35 D1 B1 necessary for reactive powder materials like Titanium or Alumin
25. orised adjustment screws for simple and exact adjustment of the platform In combination with a measurement tool which is mounted on the recoater arm this allows a quick and easy alignment of the platform at the start of each job It also includes reference positioning holes for precisely and reproducibly locating build platforms with corresponding positioning holes by means of positioning pins The building system has two parallel guide rails with backlash free guides for highest positioning accuracy and long operating lifetime position repeatability lt 0 005 mm maximum build height z axis stroke 325 mm including building platform Note see section 3 for building platform thicknesses 1 4 Process computer with process software The process computer with process software PSW controls the build process and the system s measuring and control components 1 4 1 Process computer Industrial type PC processor at least Pentium 4 with at least 2 GHz main memory at least 1 GB hard disk gt 10 GB monitor 15 flat screen LCD colour data interface 10 100 Mbit Ethernet other peripherals wipe clean keyboard mouse operating system Microsoft Windows XP SW 12 2010 4 33 1 4 2 Process software PSW Using the process software the building process job is prepared protocolled and filed Data can also be displayed in a graphical layer format directly on the machine with this software It includes many feat
26. porting for certain geometries This product is integrated within Materialise Magics RP and requires MagicsRP minimum V9 05 and SG module The price of EOSTYLE module already covers the maintenance fee for the first year of usage Further agreements to ensure the compatibility for future versions of Magics have to be concluded directly with Materialise SW 12 2010 19 33 6 5 CAMbridge CAMbride 2010 is a software package for data preparation for dental restauration applications It is available for every actual windows operating system Win 7 Vista Win XP and covers the needs of data processing for EOSINT M 270 Dental part visualisation automated generation of support structures automated detachable ID tags automated positioning on building platform fast and simple creation of job file for PSW EOS recommends the use of the optional data preparation software CAMbridge with the Dental package Note a special dental training for production of dental restaurations is obligatory due to statutory requirements e g for production of medical devices 6 6 Software recommendations The following software is recommended to run an EOSINT M 280 system For producing parts which do not need support structures e g most tooling inserts EOS RP Tools single non expiring licence EOS PSW offline single non expiring licence For producing parts which need support structures additionally Materialise Magics RP licen
27. rmissible temperature of the metal powder conveyed 0 80 C Fig Conveying module for EOSINT M 280 SW 12 2010 25 33 e75 8 2 3 Refill Module This option enables a secure and user friendly refilling of sieved metal powder in the process chamber dispenser duct It is particularly recommended if costumers prefer a rapid and contact free handling even of big amounts of powder pP Fig Refilling module for EOSINT M 280 8 2 4 Electrical lifting trolley The electrical lifting trolley can be equipped with various fork adapters for following purpose g removing building platform from machine transporting setting down picking up powder bin transporting and setting down in the conveying module in the sieving module or on a surface changing pre filter on the recirculating filter unit Technical Data Max permissible load 130 kg Charge time of completely empty accumulators 4 5 h Fuse of the battery charger melting fuse 30 A Stroke 2 000 mm Fig Lifting trolley for EOSINT M 280 SW 12 2010 26 33 C25 8 3 Building platform handling equipment 8 3 1 Erowa clamping system This option enables building platforms to be mounted in the EOSINT M 280 using a clamping system of the type Erowa Powerchuck 150 In this way finished jobs can be quickly and easily removed from the machine and transferred to other machining stations e g milling or EDM machines which are f
28. rticular the generated assessment of the part report refers exclusively to the selected parts and their process conditions so that even with incorrect jobs positive reports can be generated for not affected parts Thus you can efficiently document the quality and standard compliant production of the parts of your internal and external customers In the Statistic Tab the Quality Assurance Module permits period based research on all quality related data e g success rate breaks in the building job material changes and building temperatures 3 3 EOSTATE module Controlling The EOSTATE Controlling Module prepares the monetary relevant information in a clearly arranged form by means of an accumulating report and the Statistics Tab The Statistics Tab provides evaluations of defined periods e g weeks months quarters and its course over a chosen period of time So powder consumption or machine efficiency are prepared graphically and therefore can be used quickly as a basis for decisions 3 4 EOSTATE module Machine Park Management The optional EOSTATE MPM Module enables to optimize the control and efficiency of a manufacturing site Service relevant information like last maintenance date or upcoming maintenance laser hours machine hours PSW warnings and error messages are prepared and clearly displayed SW 12 2010 9 33 75 4 Materials A number of different materials are available for use with EOSINT M 280 systems offering
29. s are to be kept to Hence the five PPPs to which five parameter sets correspond to address to different requirement profiles sometimes mainly to costs sometimes to different quality characteristics or carefully well balanced compromises 2 2 Original EOS Parameter Sets Compared to the state of technology of the former EOSINT M 270 the Original EOS ParameterSets OEPs are unchanged version number 1 0 or rather further improved versions number 2 0 Following OEP parameter sets are available for EOSINT M materials with 200W option Original EOS Parameter Sets 200W Layer thickness DM20_Surface 1 0 20 um MS1_Surface 1 0 20 um MS1_Perfomance 2 0 40 um GP1_Surface 1 0 20 um GP1_Performance 1 0 40 um PH1_Surface 2 0 20 um MP1_Surface 1 0 20 um MP1_Performance 1 0 40 um Ti64_Performance 2 0 30 um IN718_Surface 1 0 20 um IN625_ Surface 1 0 20 um SW 12 2010 6 33 2 2 1 Surface Surface allows the production of parts or tools with fine delicate geometries and highest requirements in terms of surface quality Thinnest possible layer thickness is 20um 2 2 2 Performance Performance offers high productivity with 40um layer in 200W Mechanical properties and density are identical with Surface parameter set Compared to Surface parts Performance parts production costs are reduced 40 50 Note all these parameter sets produce fully dense parts with comparable mechanical properties see
30. sed version with additional module SG EQOSTYLE To ensure compatibility for future versions of Magics a maintenance contract with Materialise can be purchased For producing dental restaurations CAMbridge 2010 SW 12 2010 20 33 7 Machine modes EOSINT M280 can be operated in different modes 7 1 Using Nitrogen as process gas In this mode the EOSINT M 280 system is set up for optimal safe and cost effective processing of all EOS StainlessSteel MaragingSteel and CobaltChrome materials as well as DirectMetal 20 Processing is done under nitrogen atmosphere created by a nitrogen generator integrated into the machine frame which generates the nitrogen from an external compressed air supply For details of connections please refer to the Installation Conditions for EOSINT M 270 7 2 Using Argon as process gas In this mode the EOSINT M 280 system is set up to operate using an inert argon atmosphere Reactive metals such as EOS Titanium Inconel and Aluminium powders may only be processed using this operation mode Most other materials such as nickel alloys and steels can also be processed under argon atmosphere The following features are included in EOSINT M 280 many of which are required due to the higher safety requirements when working with argon gas and reactive metals aconnection to external bottle s or bottle battery of argon as supplied by the user see Installation Conditions extended and redunda
31. the software with an EOSINT M 280 will get an introduction into the use of the software during the basic system training 10 4 Service programme To maintain the system s continuous availability EOS offers different contract options in its service programme The options take into account the individual requirements of the operator For detailed information about the services offered under the contract options please refer to our separate offer The data are based on our latest knowledge and are subject to changes without notice They are provided as an indication and not as a guarantee of suitability for any specific application EOS EOSINT DirectPart DirectTool DirectMetal DirectSteel and e Manufacturing are registered trademarks of EOS GmbH Windows Windows NT and Windows XP are registered trademarks of the Microsoft Corporation 2010 EOS GmbH Electro Optical Systems All rights reserved SW 12 2010 33 33
32. totoxicity of the dental materials Recertified according to the new a Medical Device Directive 93 42 EEC Typical applications dental restorations crowns bridges etc 4 7 EOS Titanium Ti64 and EOS Titanium Ti64ELI EOS Titanium Ti64 is a pre alloyed Ti6AIV4 alloy in fine powder form This well known light alloy is characterized by having excellent mechanical properties and corrosion resistance combined with low specific weight and biocompatibility The ELI extra low interstitial version has particularly low levels of impurities Typical applications parts requiring a combination of high mechanical properties and low specific weight e g structural and engine components for aerospace and motor racing applications etc biomedical implants note subject to fulfilment of statutory validation requirements where appropriate e g for commercial use as a medical device in most countries SW 12 2010 12 33 4 8 EOS Titanium TiCP EOS Titanium TiCP is a commercially pure titanium powder Its chemical composition corresponds to the requirements of commercially pure titanium grade 1 This material is characterized by excellent biocompatibility and corrosion resistance in addition to its good mechanical properties and low specific weight Typical applications biomedical implants note subject to fulfilment of statutory validation requirements where appropriate e g for commercial use as a medical device i
33. ures which allow the operator to obtain optimal results from the build process Further details are available on request operating system Microsoft Windows XP data input format SLI according to EOS specifications 1 5 Platform heating module The platform heating module reduces temperature gradients between the building platform and the part to reduce internal stresses and ensure a good bonding of the first layers It also removes any moisture from the powder and helps to maintain the part at a constant temperature during any interruptions in the building process to ensure maximum process reliability operating temperature approx 40 100 C 1 6 Laser cooler The laser of EOSINT M 280 requires cooling A water air cooler is included as standard refrigerating capacity 1 4 kW 1 7 Standard accessories A set of standard equipment for cleaning tools for job start and removal of parts is included SW 12 2010 5 33 2 Part Property Management PPM Module 2 1 PPM Parametersets The so called Part Property Profiles PPPs enable a standardisation of the properties of lasersintered parts The definition of the PPPs is derived from the typical profiles of requirements With every part to be built certain quality relevant requirements concerning surface quality mechanics accuracy and detail resolution are to be fulfilled each with a different degree and focus As a rule among quality targets also cost target
Download Pdf Manuals
Related Search