User Manual
Contents
1. Description Description LCD Touch Screen Volume control Speaker Talk button SD Card Slot Door release button Power lamp P ower switch Microphone Connecting terminal This videophone product provides different functionality for connecting the second door camera At the time of booting the built in program checks the connectivity of the second door camera and commands to supply the power to the second camera Therefore in case of connecting the second camera the connection must be completed before the power is turned on This product provides a full touch feature All functions are operated by touch of icons displayed on screen R 3 Function and Description As power is turned on by power switch the blue LED located at the bottom of the front panel is turned on and the booting logo is displayed After a few seconds you will hear the beep tone and the videophone is now in standby mode 1 Page and Call function As the paging button on a door camera is pressed the paging tone Sol Mi Do rings at the connected videophone and sub interphone if connected to the videophone for two times consecutively The door camera view is displayed on the videophone within 3 seconds and the blue LED at the bottom of the screen starts blinking Touch icon to talk to the visitor The LCD screen of the videophone will remain on for 30 seconds if not answe2. SDHC Card Size 4 GByte 8 GByte 16 GByte Still Images 256 256 256 Limit of Video F iles 60 Second long max 380 max 750 max 1 500 Recording time Appx 380 min Appx 750 min Appx 1 500 min 10 4 GUI Description 1 As Powered On As powered on the COMMAX booting logo is displayed and the system checks SD Card memeory availability The SD Card icon displayed and the message SD CARD CHECKING is displayed on the screen As the system initializing is completed a beep sounds and the screen becomes off to enter standby mode ua o 1 sl ab d SmartHome amp Security 2 Main menu In standby mode screen is off touch the screen to turn on the screen To go back to standby mode touch the power icon located on the upper right corner of the screen CHECKING VISTOR MENU SETTING Icons and description Description Function Checking Visitor Check recorded video or still images of visitors Menu Settings Setup functions Camera_1 Call or monitor the Door Camera_1 Camera_2 Call or monitor the Door Camera 2 CCTV_1 Monitor CCTV Camera_1 view CCTV_2 Monitor CCTV Camera_2 view Interphone 3 Checking Visitor To call the sub interphone Select video or still image CHECKING VISTOR Uoc STILL IMAGE 12 Icons and description Description Function Video Check visi
3. 1963 COM SmartHome amp Security User Manual WWW Commax com COMMAX Co Ltd Thank you for purchasing COMMAX products Please carefully read this User s Guide in particular precautions for safety before using a product and follow instructions to use a product exactly The company is not responsible for any safety accidents caused by abnormal operation of the product 8 Greetings Thank you for choosing COMMAX Please read this manual carefully before you use the product R Table of contents ep usa E 1 Contents table eicit ent et Pe eret end et che creto 1 T Warnings and acp nt ea ep 2 2 ea sicuetienisctasaanted 4 3 F inction and s a i eo RO D Dom Ox Aiea 5 4 GUI Description ise ert rent cet e ee eee er deren 10 5 WANING S che miglia etr ertet rete porch ie Pra E reae AT ERREUR 29 GP ROGUCECOMP OME MES erronee a aU En E M DET 31 J CAUTION MMS C s su PRI 32 8 Miscellari amp ous su a asnapa upayasqa dg Da ax ae 32 9 Specificatiou T 32 1 Warnings and caution Please follow the things described below in order to prevent any danger or property damage Warning It may cause a serious damage or injury if violated Caution It may cause a minor damage or injury if violated Prohibition No disassembly No
4. an h E Request Electric shock Fire Request Electric shock Fire When installing the product please fix it firmly while using the wall mounting unit and screws It may cause an injury from the falling object 0000 Request Please be careful when using an AC circuit breaker since there is a possibility of an electric shock Request Electric shock Please check the use voltage and current for the DC only products and use the appropriate rectifier It may cause a fire Request Fire Please avoid direct rays of the sun or heating devices at a time of installation It may cause a fire Request Overheating Fire Please don t install the product on an unstable place or small support board It may cause an injury if it falls down while in use CI C A Request When cleaning the product please rub it with a soft and dry cloth after plugging out the power cable Please don t use any chemical products such as wax benzene alcohol or cleanser Prohibition Please don t drop the product on the ground and don t apply a shock It may cause a failure Prohibition Please use the designated connection cable within the maximum calling distance designated for the product It may reduce the product performance Request me 2 Part Names
5. LANGUAGE SETTING SETTING n Icon Description Function gt Time Setting Date and time setup Display Setting Display setup for contrast brightness hue Language Setting Language setup 8 languages supported Settings menu for other functions Home Return to main menu Prev e setting More e e Move to previous menu or screen 7 Time The time stamp for recorded video and still images are recorded according to time setup in this menu The year month date hour and minute can be adjusted by left and right button Touch the category to adjust Touch ao Icon to complete the setup TIME SETTING YEAR MONTH DAY MES dit 825 HOUR MINUTE 05 dus X save Q Icons and description Description Function Decrease value Decrease the time and date to adjust Increase value Increase the time and date to adjust Save Save the date time settings Cancel Cancel the date time settings Home Return to main menu Prev Move to previous menu or screen CAUTION The time and date automatically reset if powered off for 48 hours Time and date settings required as powered on 16 8 Display Brightness contrast and hue can be set in this menu Touch the category that you wish to adjust Touch or Icon to change the value Description Function BRIGHTNESS Adjust
6. menu Prev 00029275 Move to previous menu or screen 11 Saving Method Recording option can be selected between video and still image If video is selected video is recorded and audio is also recorded for door camera recording CCTV camera recording is only for video If still image is selected only the still image is recorded CHECKING VISTOR STILL IMAGE Description Function Video If selected video is recorded both video amp audio recording is for door camera recording Still Image If selected still images are recorded Save video or still image depending on PANE the recording option Cancel Cancel recording option settings Home Return to main menu Prev Move to previous menu or screen 12 Reset All Settings This function resets all settings of the device to initial settings and inserted SD Card memory is formatted All the recorded video and still images on the SD Card are completely deleted if Reset All Settings function is performed with the SD Card memory inserted in the device We strongly recommend to backup the recorded video and still images or remove the SD Card memory prior to performing the reset function Time settings remains however the time is reset if powered off for 48 hours Please backup the recorded video and still images or remove the SD Card from the device prior to perform Reset All Settings function ALL INITIALIZATION AL
7. 2PX2EA Door Camera Connector InterPhone Connector 4PX2EA 4PX1EA 32 I me 7 Caution in use 1 Turn on the power switch 2 Please contact your local agent for product maintenance when you have a problem in use of CDV 72UM 3 For your safety power switch with a safety device must be used in your building 4 Unplug before installing or repairing the product 5 Unplug when you connect monitor with door cameras 8 Miscellaneous e Please carefully read this User s Guide before calling service man After checking the entire check list please contact customer service center We will do our best to make you satisfy with our services 9 Specification MODEL CDV 72UM Wiring Door camera 4 wires Polarity CCTV 2wires P olarity Interphone 4wires P olarity Voltage 100 240V 50 60 Hz Power Consumption Standby 4 6W in operation 16W Communication Full duplex Hands S et Monitor 17 78 m 7 TFT DIGITAL LCD Ringing Entrance Electronic chime 3 call 2times Interphone Electron buzzer Video receiving period Standby 30 5sec response 60 5sec 0 5mm 0 65mm 0 8mm Distance 28m 50m 70m Temperature 0 40 C 82 F 104 F Dimensions mm 276 W X 178 H X 31 D COMMAX
8. L INITIALIZATION ALL INITIALIZATION 22 Icons and description Description Function All Initialization Reset All Settings All settings of the device is set to initial settings and the inserted SD Card is formatted Time and Language settings remain Yes Start reset all settings No Cancel reset all settings Return to main menu Move to previous menu or screen 13 Automatic Manual Saving This function is to select Automatic or Manual Saving option AUTOMATIC MANUAL SAVING AUTOMATIC SAVING MANUAL SAVING 4 save Icons and description Description Function Automatic Saving Set recording option to automatic Manual Saving Set recording option to manual Save Save Automatic Manual Saving option settings Cancel Cancel Automatic Manual Saving option settings Home Return to main menu Prev Move to previous menu or screen 14 MOTION setting amp MOTION sensitivity setting This is the function to set or adjust the MOTION sensitivity or to activate the Motion feature of the Lobby camera amp of the CCTV camera Note Only a selected camera out of the cameras installed can use the Motion feature When It connects with only DRC 40KA then The Motion detection of the Lobby can be used e f it connects with other cameras except DRC 40KA It causes the problem such as howling If you use the front d
9. ckup the data gt Recorded file name and format 00001MC1 jpg 00002NC2 jpg Still image 00003MD1 jpg 00004ND1 jpg 00001MC1 asf Video 00002NC2 asf 00003MD1 asf 00004ND2 asf File Type Video Type File Type xxxxxMxx jpg asf 1 2 Door 1 2 Still Image Still Image Description Motion Image or Video 1 02 CCTV 1 2 Video gt jpg asf C1 C2 Door 1 2 Still Image Video Nomal Image or Video D1 D24 CCTV1 2 Video asf c SD Card requires a minimum space availability for system operation Minimum storage space Min 300MB c Still image recorded up to 256 cuts As it becomes full 256 cuts overwrites from the oldest data c Video is recorded up to maximum space availability of the SD Card If no space available on the SD Card Backup icon is displayed on the screen As the above icon is displayed it starts to overwrite from the oldest data Note At this time several files can be deleted to keep c asingle file or all files may be selected to delete minimum space availability for system file It is strongly recommended to backup important video data Depending on the SD Card memory number of files to be recorded may Vary Please refer to below table Even if the CD Card memory has space available it starts to overwrite as the number of file limit exceeds c Limit of files for various SD Card size
10. con for still image recording mode m icon for video recording mode is displayed on the upper right corner of the screen Touch o or nextto icon to control the call volume during a call Touch the call icon to enda call Touch the door release icon during a call to release the door lock The blue door release icon is displayed in the center of the screen and the door is released Icons and description Description Function Call To starta call or end a call Door release Touch to release a door lock during a call Manual Saving Record video or still images manually by touching the icon during a call Reject call Exit Rejecta call when paged from a door camera video and ringtone become off and enter standby mode or Exit from current menu Interphone 26 Page the sub interphone connected to the videophone 16 Interphone To page an interphone connected to the videophone In standby mode touch the interphone icon a to turn the touch screen to interphone mode Touch the interphone call icon to make call to an interphone when you page the interphone you need to keep touching the icon As the handset of the interphone is picked up the call is made The call time is limited to 60 seconds If the interphone icon Cu is not touched after 15 secondsl the call is ended and the videophone enters standby mode When paged from the i
11. ct away from the wall 10cm for the ventilation It may cause a fire due to the increased internal temperature 5cm S A Prohibition Fire Cleaning amp Use Power amp Installation Cleaning amp Use N Warning Please don t disassemble repair or rebuild this product arbitrarily please contact the service center if a repair is needed It may cause an electric shock or fire Electric shock Fire Unplug If an abnormal sound burning smell or smoke is coming out of the product please plug out the power cable and contact a service center It may cause an electric shock or fire Please don t insert any metallic or burnable materials into the ventilation hole It may cause an electric shock or fire S AA Prohibition Electric shock Fire Please use only the designated batteries for the products of using DC power It may cause an electric shock or fire IW O Request Caution Please plug the power cable firmly into the inner end It may cause a fire Request Fire Please hold the plug tightly when unplugging the power cable a part of the copper wire may be disconnected if the grabbing is only made on the cord when pulling out the cable It may cause an electric shock or fire When connecting the power cables after cutting the cable please install the product with power off It may cause an electric shock or fire
12. nded 5 If the icon is touched during a call from a videophone to a door camera the handset of the interphone can be picked up to enable 3 way call f a visitor presses a paging button from the door camera 2 during a call between the videophone and the door camera 1 the first call from the door camera 1 is ended and the connection to the door camera 2 is made automatically If a visitor pages the videophone from a door camera during a call between the videophone and the sub interphone in progress the door camera view is displayed on the videophone and the 3 way call is enabled X All calls are ended if the o icon is touched during the call 4 Recording video When paged from a door camera or monitoring the door camera view from the videophone touch the o icon to record the video In case of recording still images it is taken every time the icon is touched While recording a video the recording continues This function is enabled regardless of the settings of Automatic Saving Manual Saving in the settings menu This function is enabled even during a call between the videophone and the door camera The video and still images are recorded on to SD Card memory and without the SD Card memory inserted in the videophone video and still images cannot be recorded b Monitoring By touching the camera icon from the videophone the camera view is monitored from the videophone screen If you continue monit
13. nterphone Ringtone sounds and the display is turned to the interphone call screen Touch the call icon to connect The call time is limited to 60 seconds If the interphone is not answered within 10 seconds the videophone automatically enters standby mode Touch the call icon to end a call 28 Icons and description Description Function Call Start or end a call Reject E xit Rejecta call from an interphone screen and ringtone are off and enter standby mode or E xit from current menu Intephone Page an interphone 5 Wiring schematic Camera connecting terminal 4 wires with polarity 1 RED Voice signal input 2 BLUE GND 3 YELLOW Power 12V 4 WHITE Video signal input Sensor connecting terminal 3 wires with polarity 1 RED Power 12V 2 BLUE GND 3 YELLOW SENSOR Signal input CCTV Connecior 2 wires with polarity 1 RED Video signal input 2 BLUE GND Program INTERPHONE amp CCTV CAMERA requires a separate power supply amp Use the proper cable Coaxial Cable with appropriate specification for various distances between the CCTV CAMERA and the videophone t 0 RED VIDEO n Blue GND ADAPTER 6 Product components S EF Monitor CDV 72UM User Manual Wall Bracket Mounting screw Monitor fixing Screw EA LEA CCTV Camera Connector
14. oor camera with motion detection audio is not supported MOTION SENSITIVITY TNI MEDIUM 4 save CANCEL Icons and description Description Function The Motion detection can be applied only eens CAMERA 1 The Motion detection can be applied only CAMERA 2 CAMERA 2 The Motion detection can be applied only con CCTV 1 The Motion detection can be applied only CCTV 2 MOTION inactive The motion detection is not in use Icon Description Function 115 The sensitivity of Motion detection is high MOTION f s f GD sENTITIVITY The sensitivity of Motion detection is medium MEDIUM MOTION gt ag oy Low 11 Sensitivity of Motion detection is low By motion detection show you images that storage LCD ON in the LCD screen By motion detection does not show you images that LCD OFF stored in the LCD screen If you save some images only power LED will blink Home Move on to main menu Previous Move on to previous menu 15 Page Call and Door release When paged from a door camera or the visitor icon is touched the door camera view is displayed on the LCD screen As the door camera view is displayed on the screen touch the call icon to connect to the door phone The camera icon located on the upper left corner of the screen indicates which camera view is displayed i
15. oring other cameras connected to the videophone please touch the icon located on the upper left corner of the display The cameras in the following order will be displayed on the screen CAM1 CCTV1 2 CCTV2 Continue in loop To end monitoring simply touch the exit icon Q 6 Door release To open the door simply touch the Q icon on the screen 7 Still image recording function This function is activated when the settings is set to record still images If set as Auto Saving the still image is recorded every time paged from a door camera During monitoring or talking with the door camera touch the icon to record the still image 8 Video recording function This function is activated when the settings is set to record video If set as Automatic Saving the video is recorded every time paged from a door camera When paged recorded for 30 seconds and when talking recorded for 60 seconds The maximum recorded time is 90 seconds 30 seconds when paged 60 seconds when answered Caution 1 Do not remove SD Card while recording still images or video It may damage the SD Card and data can be lost Caution 2 This product records only on to SD Card and without the SD Card inserted or with damaged SD Card still images and video cannot be recorded Managing Folder and File Root folders created WOVIE PICTURE If below icon is displayed on the screen please ba
16. red If answered it will remain on for 60 seconds The o icon is displayed on the screen To answer a call from door camera simply touch the icon To page an interphone connected to the videophone from Home screen simply touch the icon icon is displayed the screen at the bottom right of the screen and touch the icon again to page the interphone To answer a call paged from the videophone simply pick up the handset To end a call from the videophone touch the interphone icon To call the videophone from the interphone simply pick up the handset and keep pressing the paging button If the icon is released it stops paging the videophone Please keep pressing the button until answered from the videophone The paging tone rings at the videophone and to answer the call paged from the interphone touch o icon to answer the call The interphone icon on the screen remains for 10 seconds after the call is ended and the videophone enters standby mode 2 Ringtone volume control low high Ringtone volume is controlled by the switch located on the right side of the panel 3 Call function Touch a camera icon to answer the call The blue LED at the bottom of the panel blinks If the handset of the interphone connected to the videophone is picked up during the call between the videophone and the door camera 3 way call is enabled Talk time is limited to 60 seconds and will automatically be e
17. the brightness CONTRAS Adjust the contrast HUE Adjust the color Reset All values are reset to default settings Brightness Contrast Hue reset to the middle Prev Move to previous menu or screen 18 9 Language Language setup is enabled in this menu Default language settings is English Select the language you wish to set and touch 1 complete the settings LANGUAGE SETTING ENGLISH RUSSIAN SPANISH POLISH PERSIAN CHINESE Icons and description Description Function Save Save the language settings Cancel Cancel the language settings Home Return to main menu Prev Move to previous menu or screen 10 More settings for other functions Settings for Saving Method video or still image Reset All Settings Automatic Manual Saving and Motion detection of CCTV camera is enabled in this menu SETTING SAVING METHOD ALL INITIALIZATION AUTOMATIC MANUAL MOTION Icons and description Description SAVING Function Saving Method Recording option setup Video Still image All Initialization Reset All Settings All settings of the device including recorded video and still image data are to be reset and deleted Automatic Manual Saving Select recording option from Automatic and Manual Motion Settings for motion detection option of CCTV cameras connected to the videophone Home Return to main
18. tors of recorded video Still Image Check visitors of still images Home Return to main menu Prev Description Move to previous menu Function Prev Move to previous menu or screen UP Move to previous page Move to next page 4 Check video As a single video is selected from the 4 split screen the screen turns to full screen to playback the selected video To delete the video touch icon Icons and description Icon Description Function Prev Move to previous menu or screen 6 Move to previous page G5 DOWN Move to next page e Delete Delete the selected video Display I CON Description Eu In the usual way if you have auto or manual recording of one call monitoring Displayed when the video was recorded EU When the video was recorded by a motion detection is displayed When playing audio will not play 5 Delete recorded video Touch o icon to delete the video Touch Yes to delete Icons and description Description Function Prev Move to previous menu or screen UP Move to previous page DOWN Move to next page Delete Delete the selected video Yes Command to delete No Cancel delete 14 6 Settings Time display and language setup are enabled in Settings menu TIME SETTING Icons and descriptio MENU SETTING DISPLAY
19. touch Must follow strictly without an exception PPOeOoOO Shows plugging out the power cord Shows the warning and caution for an electric shock Shows the warning and caution for a fire Power amp Installation N Warning Please don t use several products at the same time on one power socket It may cause a fire due to an abnormal overheating Prohibition Fire Please don t bend the power cable excessively or it may cause an electric shock fire when using a damaged power cable Prohibition Electric shock Fire Please don t handle the power cable with a wet hand It may cause an electric shock A Prohibition Fire Please plug out the power cable from the socket when not using it for a long period of time It may shorten the product lifespan or cause a fire Request Fire Please don t install the product in the place where there is much oil smoke or humidity It may cause an electric shock or fire Prohibition Electric shock Fire Please don t install the product with the lightening and thunder It may cause an electric shock or fire Prohibition Electric shock Fire Please don t use and connect this product with other products with different rated voltage It may cause a disorder or fire Prohibition Fire When installing the product that generates heat please install the produ
Download Pdf Manuals
Related Search