Home

User Manual

image

Contents

1. It can be adjusting image get dark or bright It can be adjusting image get distinct or vague Adjust frequency to fill display Adjust remove noise and sharpen the image It can be moved to left or right side of image lt can be moved to up or down side of image Support other languages for OSD menu It can be moved to left or right side of OSD menu It can be moved to up or down side of OSD menu Set favorite saturation color for 9300 6500 5800 sRGB and USER Set favorite color of red greed and blue Offer option of Reset for recall default value Save and exit OSD menu AIOX 3 BIOS Setup 3 1 Introduction A licensed copy of Phoenix Award BIOS is preprogrammed into the ROM BIOS The BIOS setup program allows users to modify the basic system configuration This chapter describes how to access the BIOS setup program and the configuration options that may be changed 4 Note Specification and adjustment item subject to change without notice for further improvement 3 1 1 Starting Setup The Phoenix Award BIOS is activated when the computer is turned on The setup program can be activated in one of two ways eo Press the DELETE key as soon as the system is turned on or eo Press the DELETE key when the Press Del to enter SETUP message appears on the screen If the message disappears restart the computer and try again 3 1 2 Using Setup Use the arrow keys to highlight items press ENTER to select u
2. dialogue box and press ENTER To disable the password simply press ENTER in the Enter Password dialogue box then press any key in the Password Disabled dialogue box Set User Password Use the Set User Password option to set the supervisor password By default no user password is set To install a user password select this field and enter the password After this option is selected a red dialogue box appears with Enter Password Type the password and press ENTER Retype the Original password into the Confirm Password dialogue box and press ENTER To disable the password simply press ENTER in the Enter Password dialogue box then press any key in the Password Disabled dialogue box Save amp Exit Setup Use the Save amp Exit Setup option to save any configuration changes made and exit the BIOS menus Exit Without Saving Use the Exit without saving option to exit the BIOS menus without saving any configuration changes 4 Cleaning and Simple Troubleshooting 4 1 Precautions 1 Be sure to unplug the power connector before cleaning this machine 2 Volatile chemical solvent e g methylbenzene resin or alcohol will damage the exterior case tinted glass and the remote controller Do not apply them to clean this machine 4 2 Cleaning Exterior Case and Remote Controller 1 Please apply soft cloth 2 Please wipe the exterior case or the remote controller with soft cloth dampened
3. screen high voltage wire or neon light influencing on the audio and video facilities Lowered color or image Check whether every image configuration e g Brightness Contrast or quality Color is adjusted correctly size Incorrect image or color Check whether the signal cable is loosened or improperly connected Change the image resolution on PC if PC is working for correct image output signal deviation of PC will influence the images displayed Outward connected Check if the connect cable is unplugged loudspeaker disabled Check whether the MUTE mode is on Check the audio signal cable of the peripheral is properly connected Power signal light twinkles Check whether the signal cable is loosened Confirm whether the screen is under Power Saving mode Input images and signals Change the image resolution on PC if PC is working for correct image failed the message Out of output signal deviation of PC will influence the images displayed range DISPLAY 15
4. Adapter Power Cable Power Adapter USB Keyboard Option USB Mouse Option AIOX 2 2 Names of External Components and Function Description 2 2 1 Front Control Keys A A ae AUTO COLOR a gt v y a a ma SELECT MENU STAND BY 4 6 5 4 3 2 i E l pr iin A do LCD Display On Off and Power signal light turns green to indicate the display s power is on 2 STAND BY Panel On Off and Power signal light turns flash red to indicate the display s is stand by mode 3 T y button Move the highlight bar to right direction or up direction Increase the adjusting function Auto calibration the picture color while the OSD menu is off 4 P y button Move the highlight bar to left direction or down direction Decrease the adjusting function Auto calibration the screen while the OSD menu is off 5 T MENU button Push for OSD menu on while the OSD menu is off e Exit OSD menu 6 r SELECT button Push to select adjusting function while the OSD menu is on eo Push to release the adjusting function while adjusting function was selected AIOX 2 2 2 Input Output Ports A Internet Intranet Expand USB Port MOUSE KEYBD MIC SPK L N USB DC IN v Y O oo m g Y r Up pi N C R PS 2 MOUSE PS 2 KEYBOARD Microphone Line in Speaker Out DC 12V 4A Input Descriptions of Input Output Port The HP 7801 provides a standard PS 2 mouse and Keyboard co
5. electric shock please unplug the LCD before maintenance The power cable or plug is damaged or warn out Any fluid poured into the LCD Rainwater or uncommon substance permeating into the interior of the LCD Unusual smoke odor or abnormal noise occurs from the interior of the LCD The product dropped or the frame cracked No regular signal shown on the screen or unavailable function partially Dealing with such situations yourself may cause high voltage short circuits or flashover Please contact your local dealer or service center immediately if the foresaid situations occur xr Hw HO OH ene ee E Installation of LCD EAS Keep the LCD away from water or heat sources Keep your LCD from exposure to direct sunlight rainwater moisture dust and away from improper circumstances like water or heat sources e g nearby the radiator electric thermos and hot plate etc Do not place the LCD on an unstable location Do not place the LCD on an unstable fluctuating or tilt flat The dropped display may endanger the personnel safety or product functions Such situations may cause short circuits flashover or electric shocks to the product Do not place any vase or container filled with water near the LCD DISPLAY Do not place any vase or container filled with water near your LCD any water toppled over or sprayed into the LCD due to omission may lead to short circuits or circuit
6. with little neutral cleaner if there are critical stains 4 3 Cleaning Screen 1 Please wipe the screen slightly with soft cloth 2 The face of the screen is made of fragile glass please do not clean the screen with keen or stiff articles lest they should scrape the glass Do not press or flap the glass heavily for fear of cracking the glass Please wipe the exterior case or the remote controller with soft cloth dampened with little neutral cleaner if there are critical stains and then clean the screen with soft dry cloth 14 RIQDA 4 4 Simple Troubleshooting Please check the failures and examine the peripheral according to the following instructions of troubleshooting guide If you can t find any solution please contact the dealer Failure Troubleshooting Guide Power fails to start up signal 9 Check whether both ends of the power connector are properly plugged light disabled The message No Input Check whether the signal cable is properly connected Signal DISPLAY The minimum current is 4A to boot system If the system is not booting Please check the current of the adapter Please turn off main power and turn back on again Disabled operation of the Check whether the signal cable is loosened or improperly connected Mouse or Keyboard Check the windows driver is right Please turn off main power and turn back on again Twinkle dots or stripes on the Check if there any interference source e g automobile train
7. FCC Information Tested To Comply With FCC Standard FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection This equipment generates uses and can radiate radio frequency energy and if no installed and used in accordance with the instruction may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation if this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase these parathion between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help The changes or modification not expressly approved by the party responsible for compliance could void
8. breaks Any fluid moist or uncommon substance is prohibited from permeating into the LCD Dealing with such situations yourself may cause high voltage short circuits or flashover Do not wear out the power cable Do not intertwine pull or compress the power cable when placing the LCD otherwise the power cable or plug may be worn out and damaged Do not press the power cable beneath the LCD otherwise electric shocks short circuits or flashover may occur re Use and Maintenance Precautions mms Instructions of the inlet power are printed on the label of the LCD l Please contact the dealer or service center if you cannot make sure whether the inlet power matches the power instruction It may lead to high temperature fire or short circuits if the power I connector is plugged at wrong power sources l l Extraordinary Condition If your LCD is dropped or the case is cracked please unplug the power connector and contact the dealer or service center immediately p OA Use and Maintenance Precautions Bee ate ag ne renee Do not stuff your LCD with any uncommon substance Do not stuff your LCD with any uncommon substance it may get in contact 0 with high voltage or cause short circuits to components De Do not spray any fluid over the product Such situation may cause shot circuit sparking and poor contact to the device Please contact the dealer or service cent
9. er if anything occurs Do not try to disassemble or change your LCD As precise circuit design and high voltage circuit are embedded in the LCD Improper disassembly or removal of the case may lead to hazardous electric shocks and product failures We recommend that if any improper situation occurred please contact with service center we will manage our specialist Do not touch your LCD and antenna when it thunders It s recommended to unplug the power connector when the LCD is not in long period use or if it thunders Disobedience to operation instructions may lead to hazardous electric shocks or flashover UN Caution Always unplug the power connector before cleaning the LCD Please dampen a soft cloth and wipe the screen gently Do not apply any spraying cleanser or organic solvent on the LCD Good ventilation is mandatory I To ensure the product being operated and used properly please do not place the LCD in an overheated place or place the LCD DISPLAY under good ventilation The display should be kept a distance of at least 10cm from the wall and should be placed in a clean place Do not block up the vent of the case and weaken the cooling Do not place the display upside down at any time ALOK Table of Contents ESOO MAIN ss 0 Important Safety INStruCtiONS cooncccnnncicncncccncnnccnnncconanccnnnnccnnnnnnnnannnnnnnrnnannrenanerenan 1 TaD Of Co
10. nnector for MOUSE attaching a PS 2 mouse and Keyboard You can plug a PS 2 mouse and KEYBD Keyboard with adapter into this port The Smart PC All in One provides 2 USB 2 0 1 1 ports USB compatible USB devices can be plugged directly into these ports The Smart PC All in One provides one standard RJ 45 port for connection to LAN the Local Area Network LAN You can connect a network cable to the LAN port SPK This port is a connector for speakers or headphones MIC This port is a connector for microphones Inlet power connector DC 12V 4A collocated with the supplied power cable DC IN from the adapter AIOX 2 3 OSD Menu Access the subtitle option of the menu list through the panel controller Press the MENU key to display or leave the OSD menu list Press the or key to move the highline bar Press SELECT key to access the sub menu or confirm an option Press the or y key to Increase or decrease the adjusting function Press SELECT key to exit the sub menu and access next option VV VV V Y Press the MENU key to back to the last option or close OSD menu st Q Da o OO Saida f 1 5 gt Em 1024 x 768 H 48KHz V 60HZ 10 DOCDH SLO 3 2 amp CO Brightness Contrast Clock Phase H Position V Position Language OSD Hor POSITION OSD Vert POSITION Color Temperature Color Adjust Reset Exit
11. ntents asado 5 ISpecifcCa lO Narnia 6 2 Unpacking the LCD Display vessescecnscessvensexeneieccasnuacsecansaanceoscaezccasweansaeatsoscasnuacsweasss 7 Stand ara ACCES SONES ean E E E T 2 2 Names of External Components and Function Description occooonccconon 8 2 2 A SAA A eke aed aie oe 8 22 CMDULY QUTOUL POS eds siete ie dase a eones 9 ALES DO NR O eM N O 10 3 BIOS Selina od 12 A eatvanemnanteee din A EE AE tea O ER 12 S RESNING A ee a e a neal antes 12 912 USMO SEUD morrison r 12 FGE ED assaia ea a e Aa aa A aise E TN 13 SAMA DOS MOM iia 13 4 Cleaning and Simple Troubleshooting ccoccccocccconoccnnncconaccnnanconanonnannonannnnannnnas 14 cn ec dice ac a aco theaters ee Peace ea 14 4 2 Cleaning Exterior Case and Remote Controller ooooooccconoccnoncconononoso 14 A e eaten aeeaaesatenes 14 4 4 Simple Troubleshooting ooooocccooonccnoonnnonooanccononanononnnncnnonnnonnn corona nnncnnnnncnnnnnnnono 15 AIOX 1 Specification e Cost Effective Save up to 60 of your hardware cost versus buying a PC The Smart PC All in One gives any office or home users to expand an existing Host PC easily and affordable Small Sleek Design Space saving design allows more space for your office or desk area No Noise Output and Low Power Consumption Quiet operations while saving energy costs High Resolution Display 640 480 800 600 1024 768 24bit color 65 536 colors Item Descripti
12. on Model No HP 7801 Product Name 17 Smart PC All in One Introduction e The LCD PC Station is an integrated TFT LCD with AMD Geode LX 800 Processor at 500MHz MMX amp 3DNOW Main board inside Up to 1GB DDR 400 SO DIMM memory Option On Board 1 x 44pin IDE ATA66 interface for Hard Driver or flash disk Support up to 80GB Option On Board 2 x SATA controller interface for Hard Driver Option On Board 1 x Internal Type I II CF Driver Slot Built in 2D Graphic Display Controller Shared system memory up to 254MB 2 x USB 2 0 ports and 1 x Realtek s GBit LAN Port 1 x Mic in and 1 x Speaker Out on AC 97 codec Built in Stereo Speaker OSD features to adjust screen size resolution auto adjust auto color and Multi language support Specification Monitor Input Output Ports gt PS 2 Keyboard Mouse 2 in 1 Port gt GBit Ethernet RJ 45 Port gt 1 x Audio Line Out Jack gt 2X USB 2 0 Ports gt 1 x Microphone Jack gt 1x DC Jack for 12V 4A Input Supporting OS gt Windows XP Home gt Windows XP Professional gt Windows XP Media Center gt Linux WinCE Window XP Embedded AIOX 2 Unpacking the LCD Display Installation 2 1 Standard Accessories The HP 7801 consists of the accessories as listed in the following Please contact the authorized dealer or service center if any of the accessories is missed Attachments User Manual USB Keyboard Option Power Cable USB Mouse Option lt Power
13. ow and the configuration options available to users The following menu options are seen in BIOS Menu 1 O 0000000 13 h Standard CMOS Features Changes the basic system configuration Advanced BIOS Features Changes the advanced system settings Advanced Chipset Features Changes the chipset configuration features Integrated Peripherals Changes the settings for integrated peripherals Power Management Setup Configures power saving options PnP PCI Configurations Changes the advanced PCI PnP settings PC Health Status It is for monitoring the system status such as temperature voltage and fan speeds e following user configurable options are also available in BIOS Menu 1 Load Fail Safe Defaults Use the Load Fail Safe Defaults option to load failsafe default values for each BIOS parameter in the setup menus Press F6 for this operation on any page Load Optimized Defaults Use the Load Optimized Defaults option to load optimal default values for each BIOS parameter in the setup menus Press F7 for this operation on any page Set Supervisor Password Use the Set Supervisor Password option to set the supervisor password By default no supervisor AIOX password is set To install a supervisor password select this field and enter the password After this option is selected a red dialogue box appears with Enter Password Type the password and press ENTER Retype the original password into the Confirm Password
14. se the PAGEUP and PAGEDOWN keys to change entries press F1 for help and press ESC to quit Navigation keys are shown below Page up Increase the numeric value or make changes Page down Decrease the numeric value or make changes SC Main Menu Quit and do not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu Exit current page and return to Main Menu E General help only for Status Page Setup Menu and Option Page Setup Menu F2 Item help CO mo aveces and E BIOS Table 5 1 BIOS Navigation Keys 12 AIOX 3 1 3 Getting Help When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears To exit the Help Window press ESC or the F1 key again 3 1 4 Main BIOS Menu Once the BIOS open the Main Menu BIOS Menu 1 appears Phoenix AwardBIOS CMOS Setup Utility gt Standard CMOS Features Load Fail safe Defaults gt Advanced BIOS Features Load Optimized Defaults gt Advanced Chipset Features Set Supervisor Password gt Integrated Peripherals Set User Password gt Power Management Setup Save amp Exit Setup gt PnP PCI Configurations Exit Without Saving gt PC Health Status ESC Quit A gt lt Select Item F10 Save amp Exit Setup Time Date Hard Disk Type BIOS Menu 1 Award BIOS CMOS Setup Utility Note The following sections will completely describe the menus listed bel
15. the user s authority to operate the equipment AIOX Important Safety Instructions Be sure to read the safety operation instructions carefully when you are installing using maintaining or repairing the LCD DISPLAY Please do not expose the LCD DISPLAY outside lest it should cause hazardous short circuits or electric shocks when the LCD DISPLAY is dampened by rainwater or something IN proper of the Panel Stains on the LCD Panel LCD is a highly precise science technology product Few stains on the panel are tolerable if the LCD is not used yet Precautions on Movement Please keep the LCD from excessively shaken or trembled when it is moved If the LCD is fallen or stricken due to omission the glass board of the panel will be cracked and driving circuits will also be damaged em ee ee ee ee ee ee ee A A SA A SA A A A A e e e e e a e e e Prohibition f This symbol indicates This symbol indicates This symbol indicates potential risks disobedience potential risks disobedience potential risks to correct operation to correct operation procedure disobedience to correct procedure may in any way may endanger personnel or operation procedure and lead to personnel death or property breach of the prohibition injury may in any way lead to personnel death or injury RA AE Operation Precautions oo ooo Please contact professional service staff for maintenance when the following situations occur To avoid

Download Pdf Manuals

image

Related Search

Related Contents

Location, mo  ADDENDUM  日常の安全点検とお言  MICROÉLECTRONIQUE APPLIQUÉE GPA770  Graco 332709B User's Manual  AQUOS CRYSTAL Y クイックスタート  none 27395-WI Instructions / Assembly  Belkin F2E4162  C3-540 Manual  Mar  

Copyright © All rights reserved.
Failed to retrieve file