User Manual - Ramblewood Green
Contents
1. User Manual Model EC2 30 Ramblewood Green WWW RAMBLEWOODGREEN COM GENERAL INFORMATION This appliance is designed for domestic household use The User Manual contains important product safety amp installation information Your safety is of the utmost importance Please ensure you read this booklet before attempting to install or use the appliance and contact RambleWood Green if you have any question Safety Information The appliance should only be installed amp serviced by a qualified technician The adjacent furniture and all materials used in installation must be able to withstand a minimum of 85 C above the ambient temperature of the room Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage or discoloration at temperatures below the 85 C Damage caused by the appliance being installed in contravention of this temperature limit will be the liability of the user You should not store or place flammable or highly flammable liquids materials on top of or near this product Items made from aluminum plastic or plastic film should also be kept away from the appliance as they may fuse to the surface Infant should be kept away from this appliance If children is allowed in kitchen please keep them under close supervision at all time Older children should only be allowed to use the product under adult supervision The power cables should not be in close contact with the hot glass s2. local safety regulation guideline The main terminal block is located on the underside of the hob and terminals are accessible by removing the terminal block cover screw EC2 30 L ISIOL N 1 eal earth ains cable entry point The cable connections must be in accordance with the diagram located on the bottom of the hob mM EC2 30 L sel N OA r amp a HD lS 220 240V HO5 RR F 3G 1 5mm The green yellow earth wire must be connected to the Earth marked It must be about 10 mm longer than the live and neutral wires The blue neutral wire must be connected to the terminal marked with letter N the live wire must be connected to the terminal marked with letter L Please insure cable is not kinked or trapped when the hob is in position DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF
3. t on a cushioned mat Apply the sealing strip provided around the edge of the appliance Do not leave a gap in the sealing agent or overlap the thickness IMPORTANT Do not use a silicon sealant to seal the appliance against the aperture This will make it difficult to remove the hob from aperture in future for service A Clip B Fixing bracket C Screw You should insert a clip A into the holes which are located in each corner of the hob Place the fixing brackets B over each hole and clip and then place a screw C through the hole and fixing bracket B Tighten the screws slowly IMPORTANT Do not tighten the screws fully Carefully turn the hob back over and then gently lower it into the aperture hole that you have cut out Sealing strip Ea 5 Fixing bracket On the underneath of the hob locate the fixing brackets B and turn them so that they locate on the underneath of the worktop and the hob Fully tighten the screws C to secure the hob into position WARNING THIS APPLIANCE MUST BE EARTHED This appliance must be wired into a 30 A fused spur outlet having 3 mm contact separation and placed in an easily accessible position adjacent to the unit Cable type EC2 30 BOSIRRERISIcorex Simm Replacing the mains supply cable If the power supply cord is damaged it must be replaced by manufacturer or qualified technician per national amp
4. urface or cookware Fat and oil can be ignited extremely quick when overheated When cooking with fat and oil the appliance should not be left unattended Under any circumstance the cookware should not be empty when the power is on Insure all cooking zones are switched off after use The ceramic glass can be damaged cracked by external shock amp vibration Cast iron and aluminum cookware with sharp edge may scratch the ceramic surface if they are dragged across it IMPORTANT The German Shcott ceramic glass is tough however it is not unbreakable and can be damaged if heavy or sharp objects are placed on top DO NOT USE THE UNIT IF ITS SURFACE IS BROKEN OR CRACKED YOU SHOULD CONTACT RAMBLEWOOD GREEN IMMEDIATELY Specifications Product specifications and Electrical details MODELS EC2 30 Voltage 220 240V 60HZ Current Max power kW Front Side control operation Electrical cable OPERATION GUIDELINE First Time Use Any film or stickers on the glass surface should be removed before use You should switch on one cooking zone at a time for 5 minutes at maximum level This will help to remove any odor that exists and evaporate any humidity formed after exit factory Operation Guideline All operations are performed by means of the 2 control knobs Control knob can be turned clockwise to select heating power level Numbers on the dial indicate the power level from 1 to 9 with 9 is the maximum Marking belo
5. w each knob indicates the zone it controls The 2 burners deliver maximum power of 1800W amp 1200W each The areas where the heat radiate are marked by 2 circles on ceramic glass surface Saucepans must be positioned exactly on top of these zones for efficient heating Cleaning and maintenance Glass surface should be cleaned regularly IMPORTANT Clean the unit when power is off amp the glass surface is cool Using the Scraper The scraper should be placed against glass surface at an angle Residues can be removed by sliding the blade gently INSTALLATION The installation and service must be conducted by a qualified technician in accordance with national amp local regulation Product dimensions and Aperture dimensions MODEL A B C D E EC2 30 Unpacking the appliance When unpacking the appliance please check the following items are contained within the box 1 hob 1 Ceramic hob scraper 1 Installation and instruction manual 4 Fixing brackets 4 Fixing screws 4 Spring clips 1 Sealing strip Positioning The adjacent furniture must be able to withstand a minimum temperature rise of 85 C above the ambient temperature 25mm MIN o Cut a hole in countertop per drawings shown above o IMPORTANT You must leave clearance of at least 25 mm between the underneath of the unit and any surface below it Carefully turn the hob upside down and place i
Download Pdf Manuals
Related Search