User Manual - Offshore Systems
Contents
1. Offshore Systems UK Ltd Unit 10 11 Milton Business Centre Wick Drive New Milton Hampshire BH25 6RH UK Offshore Systems UK Ltd Unit 10 11 Milton Business Centre Wick Drive New Milton Hampshire BH25 6RH United Kingdom Tel 44 0 1425 610022 Email mail osukl com Fax 44 0 1425 614794 Web www osukl com Copyright 2015 Offshore Systems UK Ltd All rights reserved Our policy is one of continuous product improvement so product specifications are subject to change without notice Offshore Systems products are designed to be accurate and reliable However they should be used only as aids to vessel monitoring and not as a replacement for traditional navigation and vessel monitoring techniques 20000 is a registered trademark of the National Marine Electronics Association 9 of 10 WARRANTY Offshore Systems warrants this product to be free from defects in materials and workmanship for one year from the date of original purchase If within the applicable period any such products shall be proved to Offshore Systems satisfaction to fail to meet the above limited warranty such products shall be repaired or replaced at Offshore Systems option Purchaser s exclusive remedy and Offshore Systems sole obligation hereunder provided product is returned pursuant to the return requirements below shall be limited to the repair or replacement at Offshore Systems option of any product not meeting the above limited warranty and which i2. units Toughened glass Front of display has IP65 rating rear IP20 INSTALLATION 2 1 UNPACKING THE BOX You will find the following items in the shipping box 1 x Dual Engine Display 1 x Remote button panel 1 x DC Power cable 2 x Mounting Brackets 1 x Bag containing 4 thumbwheel nuts amp 4 sprung washers for button panel 1 x Bag containing 4 screws amp 4 washers for mounting brackets 1 x User Manual This Document 1 x Mounting cut out template 2 2 MOUNTING THE UNIT The unit should be mounted through a panel to a flat surface min 8mm max 25mm It can be mounted 45 degrees either way of vertical Ensure an adequate ventilation around the product to prevent heat build up or a minimum of 50mm Remember to allow enough clearance for access to cables and connectors Cables should be restrained to prevent damage to connectors The unit should be sealed to the mounting surface using a suitable silicone sealant This Silicone sealant will be part of the seal used to provide the IP rating for the product Using the 4 mounting brackets to clamp the display to the rear of the mounting substrate fix with the provided screws with washer under the head 3 of 10 Drawing showing panel cut out Please also see dimensional drawing in section 6 502 19 8 2 3 CONNECTING THE DUAL ENGINE DISPLAY Before making any connections to the unit ensure the NMEA20000 bus power and DC s
3. E INNO EVENT SHALL OFFSHORE SYSTEMS AGGREGATE LIABILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT S INVOLVED OFFSHORE SYSTEMS SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES WHETHER ARISING OUT OF BREACH OF CONTRACT OR WARRANTY TORT INCLUDING NEGLIGENCE OR OTHER THEORIES OF LAW WITH RESPECT TO PRODUCTS SOLD OR SERVICES RENDERED BY OFFSHORE SYSTEMS OR ANY UNDERTAKINGS ACTS OR OMISSIONS RELATING THERETO Offshore Systems does not warrant that the functions contained in any software programs or products will meet purchaser s requirements or that the operation of the software programs or products will be uninterrupted or error free Purchaser assumes responsibility for the selection of the software programs or products to achieve the intended results and for the installation use and results obtained from said programs or products No specifications samples descriptions or illustrations provided by Offshore Systems to Purchaser whether directly in trade literature brochures or other documentation shall be construed as warranties of any kind and any failure to conform to such specifications samples descriptions or illustrations shall not constitute any breach of Offshore Systems limited warranty WARRANTY RETURN PROCEDURE To apply for warranty claims contact Offshore Systems or one of its dealers to describe the problem and determine the appropriate course of action If a return is necessary place the product in its origi
4. OFFSHORE SYSTEMS DUAL ENGINE DISPLAY Part Numbers 4160 5 One USER MANUAL Revision BW 1 0 1 2 of 10 1 Introduction 1 1 Product Features 2 Installation 2 1 Unpacking the box 2 2 Mounting the unit 2 3 Connecting The Marine Display 2 4 Mounting The Control Panel 3 User Controls 3 1 Button Functions 4 Selecting Engine Manufacturer 5 Unit Dimensions 6 Technical Support 7 Warranty 1 of 10 69 INTRODUCTION The Offshore System s NMEA2000 Dual Engine Display has a 19 2 diagonal display area and has a high bright sunlight readable 1200 cd m2 display The Dual Engine Display can monitor two user selectable engines simultaneously with alarm monitoring and logging It is supplied with a wired remote button panel which can control the brightness of the backlight to the display acknowledge and clear alarm conditions 1 1 PRODUCT FEATURES The Offshore System s NMEA2000 Dual Engine Display has the following features 2 of 10 Sunlight readable dimmable display using our BlackGlass technology 1920 x 360 Resolution Remote button panel providing Backlight up down Alarm Mute Monitoring of vessels engine status with alarms Internal 105dB Sounder Includes 1 x NMEA2000 and J1939 interfaces Switchable internal line terminator resistors for J1939 interfaces User selectable Engine Manufacturer MTU MANN Caterpillar via rotary switch on rear of display User selectable metric or US imperial
5. nal packaging together with proof of purchase and send to an Authorized Offshore Systems Service Location You are responsible for all shipping and insurance charges Offshore Systems will return the replaced or repaired product with all shipping and handling prepaid except for requests requiring expedited shipping i e overnight shipments Failure to follow this warranty return procedure could result in the product s warranty becoming null and void Offshore Systems reserves the right to modify or replace at its sole discretion without prior notification the warranty listed above 10 of 10 A won eg Um a pesa SWALSAS TOH LNOO ONIHOLIMOW 13553A sO00CVIWN dVW LONGOYd SWALSAS JYOHS440
6. s returned to Offshore Systems or if Offshore Systems is unable to deliver a replacement that is free from defects in materials or workmanship Purchaser s payment for such product will be refunded Offshore Systems assumes no liability whatsoever for expenses of removing any defective product or part or for installing the repaired product or part or a replacement therefore or for any loss or damage to equipment in connection with which Offshore Systems products or parts shall be used The foregoing warranties shall not apply with respect to products subjected to negligence misuse misapplication accident damages by circumstances beyond Offshore Systems control to improper installation operation maintenance or storage or to other than normal use or service THE FOREGOING WARRANTIES ARE EXPRESSLY IN LIEU OF AND EXCLUDES ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE Statements made by any person including representatives of Offshore Systems which are inconsistent or in conflict with the terms of this Limited Warranty shall not be binding upon Offshore Systems unless reduced to writing and approved by an officer of Offshore Systems IN NO CASE WILL OFFSHORE SYSTEMS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES DAMAGES FOR LOSS OF USE LOSS OF ANTICIPATED PROFITS OR SAVINGS OR ANY OTHER LOSS INCURRED BECAUSE OF INTERRUPTION OF SERVIC
7. to increment until the minimum level is reached ALARM MUTE This will mute all current active alarm conditions e The display will power on automatically when the DC is connected to it e After approx 1 minute the computer will boot up into the home screen e Set your desired backlight brightness as per in this table 81 TOP VIEW PANEL MOUNT CUTOUT 5 of 10 6 of 10 SELECTING ENGINE MANUFACTURER On the rear of the unit is situated a DIP amp Rotary Switch the function is as follows DIP Switch Switch No Function On Imperial units OFF SI units ON PORT J1939 Line Termination resistor in circuit ON STBD J1939 Line Termination resistor in circuit Rotary switch Switch No Function 20006 Engine Data Source Caterpillar MTU MAN Volvo TBA TBA TBA TBA TBA TBA TBA TBA TBA TBA Ui HR wl ns o TBA 7 of 10 5 UNIT DIMENSIONS Dual Engine Display 512 20 2 FRONT VIEW 500 19 7 TOP VIEW 106 4 2 LEFT VIEW 8 of 10 6 TECHNICAL SUPPORT If you require technical support for any Offshore Systems products you can reach us using any of the following ways e Tel 44 0 1425 610022 e Fax 44 0 1425 614794 e Email support osukl com e Web www osukl com e Post
8. upply are turned off Connect NMEA2000 cable to Socket on the back of the unit observing correct orientation to ensure the keyway aligns The cable can be extended up to 6mtrs and connect into the T adapter on the network backbone Ensure that the screw ring is securely tightened so that the connection remains sound Connect the two J1939 cables in the same manner Ethernet connector is for internal Offshore programming use ONLY The DC Power cable can be inserted into the port marked Ensure correct orientation and make sure the screw ring is securely tightened There are two USB A and one USB OTG connectors these are not for customer use and are intended for future Offshore Systems usage Connect the Control Panel D Type Connector to the 9Way Switch Control Panel Engine Type CAN HIGH CAN LOW QU Switch Control Panel Connector 12 24 VDC 4 of 10 2 4 MOUNTING THE CONTROL PANEL USER CONTROLS Please see line drawing showing outline mounting studs and mounting area for the Control Panel The Remote panel is provided with a 1m cable tail for situation away from the Display 3 1 BUTTON FUNCTIONS BRIGHT ALARM MUTE FRONT VIEW Button Function DIM Each press will decrement the brightness level holding the button will continue to decrement until the minimum level is reached BRIGHT Each button will increment the brightness level holding the Button will continue
Download Pdf Manuals
Related Search