DVC-Dock Manual
Contents
1. Docking Station for DVC Dock DVCandMDC series Guide to Installation and Operation Interfaces M783 9500 100 Copyright 2005 Miranda Technologies Inc Specifications may be subject to change Printed in Canada September 2005 DVC DOck GUIDE TO INSTALLATION AND OPERATION Safety Compliance Information Safety Compliance This equipment complies with CSA C22 2 No 60950 1 03 Safety of Information Technology Equipment Including Electrical Business Equipment UL 60950 1 1 Edition Safety of Information Technology Equipment Including Electrical Business Equipment IEC 60950 1 1 Edition Safety of Information Technology Equipment Including Electrical Business Equipment CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Refer all servicing to qualified service personnel Servicing should be done in a static free environment Electromagnetic Compatibility This equipment has been tested for verification of compliance with FCC Part 15 Subpart B class A requirements for Digital Devices This equipment complies with the requirements of EN 55022 Class A Electromagnetic Emissions EN 61000 3 2 amp 3 3 Disturbance in Supply Systems EN 61000 4 2 3 4 5 6 8 amp 11 Electromagnetic Immunity How to conta2. ct us For technical assistance please contact the Miranda Technical support centre nearest you Europe Middle East Americas Asia Africa UK France only Telephone Telephone Telephone Telephone 1 800 224 7882 81 3 5730 2987 44 0 1491 820222 33 0 1 55 86 87 88 e mail e mail e mail e mail techsupp miranda com asiatech miranda com eurotech miranda com francetech miranda com Visit our web site at www miranda com DVC Dock GUIDE TO INSTALLATION AND OPERATION 1 DVC Dock 1 1 Introduction The DVC Dock is a docking station that provides physical support and power for a Miranda DVC or MDC series interface that needs to be operated in a freestanding mode rather than mounted on a camera The DVC and MDC series interfaces were designed to be mounted on the rear of a hand held or tripod mounted video camera powered by the camera s battery These design requirements resulted in a physical configuration that is not convenient to operate in a stand alone mode However the versatility and full feature set of these interfaces make them attractive tools in a variety of stand alone scenarios The DVC Dock was developed to make it easy to operate the DVC or MDC in those situations 1 2 Description The DVC Dock consists of a body contoured to support the shape of the DVC or MDC interface and a power supply providing the correct DC voltage for the DVC or MDC from a 120 240VAC supply Figure 1 1 DVC Dock physical configurat
3. ion front and back views DVC Dock 1 GUIDE TO INSTALLATION AND OPERATION 2 Operation To install the DVC or MDC in the DVC Dock e Place the DVC Dock on a flat surface e Position the DVC or MDC with the power connector at the bottom and facing out e Slide the DVC or MDC into the slots on the side of the DVC Dock e Plug the power connector into the DVC or MDC s receptacle e Connect an AC power cord to the receptacle on top of the DVC Dock e Power will be applied to the DVC or MDC when the AC cord is plugged into a 120VAC supply Note that the DVC or MDC is held in place by its weight only as it is not physically connected to the DVC Dock except by the power cord See the DVC or MDC User s Manual for all information regarding the connection and operation of the DVC or MDC Figure 2 2 Installing the DVC or MDC series interface in the DVC Dock 3 Specifications POWER IN 120 240VAC nominal POWER OUT 12VDC nominal 5 POWER CONNECTOR XLR 4 2 DVC Dock
Download Pdf Manuals
Related Search