User Guide - Extech Instruments
Contents
1. Press and hold S2 until the MINUTES blink Use S1 to select the desired minutes Press S3 to advance to the HOURS Use S1 to select the desired hours Press S2 when complete nP Now from the Calendar Clock main display use S1 to activate deactivate the alarm When activated the Alarm Bell symbol will appear The alarm will sound at the programmed time To silence the alarm press S1 The symbol will appear to let the user know that the alarm had tripped Chronograph Stopwatch Functions Basic Stopwatch Mode From the Calendar Clock press S2 three times Use S3 to Start and Stop the stopwatch Press and hold S1 until all zeroes are displayed to reset the watch Lap Timer Functions Up to 10 lap memories may be stored in the watch With the stopwatch running press S1 each time a lap time is to be stored The top display row will alternate between the current lap time and the lap number The bottom display always shows the total time Use S3 to stop the clock With the clock stopped use S1 to scroll through the stored lap times Press and hold S1 to zero the clock Pace Mode Use the Pace function as an audible metronome a heart rate pulse comparator or as a walk run pace guide 1 From the Calendar Clock press S2 twice 2 The pace value will appear on the lower display in BPM beats per minute 3 Use the S1 button to start stop the audible beats 4 Press and hold the S2 button until the digits blink to2. start editing the bpm value Use the S1 button to change the value in increments of 5 bpm 5 Available settings range from 40 to 180 bpm 6 Press S2 momentarily to complete the editing Count Down Timer From the Calender Clock press S2 four times Total time will be shown on the top display and remaining time on the bottom 1 Press and hold S2 until the MINUTES blink Use S1 to select the desired minutes Press S3 to advance to the HOURS Use S1 to select the desired hours Press S2 when complete Press S3 to start stop the countdown timer With timer stopped press and hold S1 to reset timer The timer will continue counting while other functions are viewed Beeps occur at 10 minute 5 minute and 1 minute intervals and for each of the last 5 seconds with a continuous beep at the end 10 Press S2 to silence the beeps and reset the timer SONOARWD o Dual Time Zone In the DUAL mode another Time Zone can be monitored Choose a time zone and program the time of that zone as follows 1 From the Calendar Clock press S2 five times DUAL will display on the top and the clock on the bottom Press and hold S2 until the MINUTES blink Use S1 to select the desired minutes Press S3 to advance to the HOURS Use S1 to select the desired hours Press S2 when complete pus amn Battery Replacement Battery life is approximately one year Replace the batteries when the display dims as follows 1 Remove the six 6 rear
3. unauthorized modification Extech specifically disdaims any implied warranties or merchantability or fitness for a specific purpose and will not be liable for any direct indirect incidental or consequential damages Extech s total liability is limited to repair or replacerrent of the product The Warranty set forth above is indusive and no other warranty whether written or oral is pressed or inplied Support line 781 890 7440 Technical support Extension 200 E mail support extech com Repair amp Retuns Extension 210 E mail repainr extechcom Product specifications subject to change without notice For the latest version of this User s Guide Software updates and other upto the rrin te productinforration visit our website wawestech com Extech Insturrents Corporation 285 Bear Hil Ral Waltham MA 02451 Copyright 2007 Extech Instruments Corporation All rights reserved including the right of reproduction in whole or in part in any form 365528 Version 3 0 4 07
4. EXTECH INSTRUMENTS User Guide Model 365528 Professional Stopwatch Description Si 2 s3 The default display is the Calendar Clock The three pushbuttons S1 S2 and S3 are used to operate and program the watch as described throughout Display LANs BBG Bsa rarer Display this User Guide To reset the watch to factory default condition press and Neck Strap hold all three buttons Lanyard simultaneously until the display blanks Calendar Clock Setting The main display is the Calendar Clock The top display row shows the day of the week the month and the date left to right The lower display shows A AM or P PM Hours Minutes and Seconds To change the date and time 1 Press and hold the S2 MODE button until the SECONDS begin to blink 2 beep 2 Press S1 to reset the seconds to 0 allowing synchronization with another device 3 Press S3 to choose the MINUTES Press S1 to advance the minutes hold S1 for fast scrolling 4 Use S3 amp S1 in similar fashion to program the HOURS AM PM YEAR MONTH and DATE 5 To exit press S2 momentarily when finished 6 Press S3 to choose 12 or 24 hour clock In 12 hour mode the A and P icons are active Alarm Operation and Settings Press S2 momentarily to view the ALARM SETTING TIME bottom display and the current time top display The AL icon will be displayed To change the alarm time
5. Phillips head screws using a metric 0 cross point screw driver 2 Remove the old battery and replace with a new CR2016 button cell Note that all stored programming will be lost when the battery is removed 3 Ensure that the battery compartment gasket is secured correctly when re assembling the meter Master Reset Press and hold the S1 S2 and S3 buttons simultaneously until the display blanks to reset all of the functions to their factory defaults Accuracy 5 seconds per each 24 hour period Lifetime Limited Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for the useful life of the product This excludes wear fromnonmel use and or abuse Proof of original purchase must acconpany any daims If it should becorre necessary to retum the instrument for service during or beyond the warranty period contact the Custorrer Service Department at 781 890 7440 ext 210 for authorization or visit our Website at wwwwextech com click on Contact Extech and go to Service Department to request an RA number A Retum Authorization RA nuntber must be issued before any productis retumed to Extech The sender is responsible for shipping charges freight insurance and proper packaging to prevent damage in transit This warranty does not apply to defects resulting fromaction of the user such as misuse improper wiring operation outside of specification inqproper maintenance or repair or
Download Pdf Manuals
Related Search