ALS-10W User Manual
Contents
1. ALS 10W The ALS 10W is a low cost compact passive low pass filter ADSL Line Splitter designed to provide POTS Plain Old Telephone System service to a line that is utilizing ADSL technology This device is designed to eliminate interference to POTS equipment by blocking high frequency energy 2OKHz 1 1MHz Features Handles all POTS loop current from 0mA to 100mA Compact size Consists exclusively of all passive elements Designed for implemenration of ADSL CPE application Provides excellent isolation between DSL and POTS 10 to 70 C operating temperature range If the power supply of the system or ATU C ATU R fails telephone service on the ADSL line will operate normally Installation Guide DSL Modem Side Connection Phone Side Pa Connection to h r a Line Side rr r i Connection To your Modem ADSL RJ 11 j modem Wires Connect to 3 our phone From your LINE Phone YOU P service RJ 11 provider Wires RJ 11 Selecting a Site for the Equipment As with any electric device you should place the equipment where it will not be subjected to extreme temperatures humidity or electromagnetic interference 1 Notice there are two green ports on both phone side connection and line side connection they are for the wire to plug in 2 Gently press the orange release on the top of green port then slide the wire into the port Make sure the wire is pluged i2. n tightly 3 Use the screw on the both sides to secure the unit on the wall or any board you wish the place the unit Ordering Information ALS 10 6 W N ADSL Line Splitter for ADSL CPE application cre CTC UNION TECHNOLOGIES CO LTD 600 ohm DSL is RJ 11 Te 866 2 2600 1024 Complies with Annex E 2 of ITU T G 992 1 aoe ALS 10 6 W C ADSL Line Splitter for ADSL CPE application ISO 9001 http Awww ctcu com 600 ohm DSL is RJ 11 Complies with Annex E 1 of ITU T G 992 1
Download Pdf Manuals
Related Search