W-AIR cordless phone User Manual
Contents
1. An audible warning is routed to the speaker when the phone is in standby mode or to the earpiece during a call An alert tone is emitted every 30 seconds The Battery status Icon on the display changes to Battery low Mute Press the Mute button during a call to mute the microphone Press Mute button again to turn on the microphone again Speaker Press Speaker button during the call to route the audio to the speaker Press Green key Off hook to switch back to the earpiece mode Headset When the headset is connected the audio is routed to the headset The audio is routed to the speaker if you press the speaker key in the headset mode W AIR cordless phone User Manual 9 Handset volume setting Press the Volume Up and Down keys side keys to adjust the sound Audio Settings Adjust the ring volume Select the menu Audio settings gt Ring volume to view or adjust the ring volume The current volume level is displayed Press navigation key Up or Right to increase the volume Press navigation key Down or Left to decrease the volume The phone plays the current ring melody during the volume adjustment Mute the ring Select the lowest volume level in the menu Audio settings gt Ring volume to switch off the ringer The Ring OFF icon appears on the top of the screen when the ringer is off Menu setting mode You can change different settings Press the Red key On Hook in the menu to return one step back If there is no i2. Before opening the package Examine the package for evidence of physical damage prior to opening If there is a proof of mishandling report it to your certified Wildix Partner Parts checklist The box contains the following items Make sure that all the components are present 1 x Handset hook 1 x A C Adaptor 1 x Charger 1 x Cordless phone with own li ion battery Before Using the Cordless Phone Read the safety precautions before using the Handset Using the battery Never dispose of the battery in fire otherwise it could explode Never replace the battery in potentially explosive environments for example close to inflam mable liquids gases Use ONLY approved batteries and chargers from the vendor or the operator Do not disassemble open or damage the battery use it carefully to avoid a short circuit Using the Charger Input Voltage 110 240VAC Output Voltage 5 5VDC 600mA For the best performance charge the handset for at least 10 hours the first time Charging the Handset When you charge the phone make sure that the room temperature is between 0 C and 25 C 32 F and 77 F Do not leave the handset in direct sunlight when charging The battery has a built in heat sensor that stops the charging when the temperature is too high There is a charging status indicator on the phone display Open Back Cover Press the lever present on the rear panel of the phone Remove the back cover from the handset W AIR cordless ph
3. Automatic Normal answer a call by pressing Green key Off hook Any key press any key to answer a call Automatic If the feature Automatic is enabled on the handset after 5 seconds the call is automatically answered Automatic keylock Select the menu Settings gt Security gt Automatic keylock Enter the menu to view the list of the optional timeouts Select the preferred timeout You can select only one timeout option at a time When the selected timeout expires the keys are automatically locked To unlock the keys press Asterisk gt Unlock You can dial emergency numbers e g 911 or 112 even when the keys are locked Silent charging Select the menu Settings gt Silent charging to enable disable the Silent charging The options of the silent charging Off The handset is ringing when receiving incoming calls Silent The handset reacts on the incoming call but doesn t ring Speed Dial One Touch Dial There should be at least one contact in the contact list Go to the Contact list and go down to the contact you want to assign a speed dial number to Select More gt Speed dial Select the speed dial number 2 9 that you want to assign to the contact Press Add The contact should be assigned to the speed dial Call a speed dial number The handset should be in idle mode and the keys should not be blocked Steps Make a long key press gt 2 seconds on a speed dial key that is assigned to a contact W AIR co
4. W AIR cordless phone User Manual Version 01 06 2012 Wildix The manual provides you with the necessary information about your Wildix W AIR cordless phone Please read this guide to ensure the proper installation and operation of the phone Unboxing Before opening the package Parts checklist Before Using the Cordless Phone Using the battery Using the Charger Charging the Handset Open Back Cover Handset Serial Number Cordless phone details Front view Rear View Display Battery Status Icon Handset LED Charger LED Quick Start Guide Operations Incoming call Pre dial a call End a call Hold and Retrieve Hold Swap Attended Call Transfer Blind Transfer Call Three way Conference call Redial Auto Stand by Out of Range Low Battery Mute Speaker Headset Handset volume setting W AIR cordless phone User Manual O 0 0 0 0 0 0 oo OWA WA A DOWDANNNN COC COCO AaAaaarkKKR KR KR KR KR KR A N Audio Settings Adjust the ring volume Menu setting mode Change the ring melody Coverage warning Confirmation sound Charger warning Key sound Alert tone Alert volume Connectivity Base Registration PIN Deregistration General Language Status Handset name Reset settings Auto answer Automatic keylock Silent charging Speed Dial One Touch Dial W AIR cordless phone User Manual 10 10 10 10 10 1 1 1 1 1 1 1 12 12 12 12 12 12 13 13 13 13 Unboxing
5. ars on the screen Press the navigation key Up or Right to increase the volume Press the navigation key Down or Left to decrease the volume Connectivity Registration Select the menu Connectivity gt Register to register the handset The prompt for an AC code Base registration PIN appears before the registration procedure starts Base Registration PIN The registration PIN by default is 0000 It cannot be changed via the handset W AIR cordless phone User Manual 11 Deregistration Select the menu Connectivity gt Deregister The warning message Delete registration Yes No appears on the screen Press the soft key Yes to proceed No to cancel the operation General Language Select the menu Settings gt Language to view the language currently used or to change it Status Select the menu Status to view the following information Software version Hardware version DECT band IP address MAC address System name Handset name Select the menu Settings gt Handset name to change the handset name Use the numeric keys to enter a new handset name The handset name is displayed on the idle display Reset settings Select the menu Settings reset settings to reset the handset name to the default one The base is not reset to default settings in this way The handset remains registered W AIR cordless phone User Manual 12 Auto answer Go to the menu Settings auto answer to select the feature Normal Any key and
6. nput for more than 1 minute the Handset cancels the setting and goes to standby mode The current menu feature setting is always displayed below the menu Highlight the menu to see the current setting Change the ring melody Go to the menu Audio settings gt Ring melody to see the list of melodies Press Select to set up any of them as a ring tone You can select only one option from the list Press Play to play back any melody The key Play changes to Stop when the playback starts Coverage warning The earpiece emits an audible warning when the user approaches the maximum range if the feature Coverage warning is enabled W AIR cordless phone User Manual 10 Confirmation sound If the feature Confirmation sound is enabled an audible warning is given when a certain operation succeeds or fails Charger warning If the feature Charger warning is enabled an audible warning is given when the handset is successfully connected to the charger Key sound You can switch On or switch Off the key tones During the key lock state no key tone is generated even if the key tones are enabled Alert tone You can select different alert tones for the alarm clock You can select only one melody from the list at a time Press the Play key to play back any melody The key Play changes to Stop when the playback starts Alert volume Select the menu Audio settings gt Alert volume to view or adjust the alert volume The current alert volume level appe
7. one User Manual 4 Handset Serial Number The serial number and IPUI number of each handset is situated either on a label behind the battery or on the package label Cordless phone details Front view 1 Ear Speaker Screen Navigation Keys Up Down Right left Selection Key centre of Navigation key Speaker Key Call Key Accept Call Key Off hook key Home Key 3 soft keys Activity Menu Key End ON OFF Key Back Key On hook key Rear View j 3 5mm Headset connector External Speaker Volume Up key side key Volume Down Key side key Mute key side key W AIR cordless phone User Manual Display TFT 262K Color LCD display with Backlight resolution 176 X 220 pixel Battery Status Icon Battery Full Battery Level 7 Battery Level 6 Battery Level 5 Batterly Level 4 Battery Level 3 Battery Level 2 Battery Level 1 Battery Level low Battery empty Handset LED One bi color LED Message Light Pipe has three colors Blue Purple Red indicating three different messages Press Settings key gt Settings gt LED signal to set up the LED indications for missed calls new voicemail messages and low battery level Charger LED The blue LED on the front of the charger shows whether the cordless phone is connected to the charger W AIR cordless phone User Manual 6 Quick Start Guide Quick start Guide Remove battery protection strip on the back side of the phone Turn on your W AIR by pressing the
8. p to go to the call 2 and to put the call 1 on hold or vice versa Attended Call Transfer To make an attended transfer Call or answer a call Press the Hold button Enter the number for a transfer and press the Green key Off hook Wait for the answer then press Transfer Press the Red key On hook to cancel the transfer Press Retrieve to cancel the transfer before the second call starts Blind Transfer Call To make a blind transfer Call or answer a call Press the Hold button Enter the number for a transfer and press Transfer Three way Conference call To create a Three way Conference Call or answer a call Press the Conf button Enter the number you want to call and press the Green key Off hook Wait for the answer then press Conf Press Retrieve to cancel the conference before the second outgoing call Redial The phone has a call log divided into 4 lists All Answered Dialed Missed W AIR cordless phone User Manual 8 To redial the number go to the list Dialed Auto Stand by The phone automatically goes to standby mode if there is no input within a given timeout Out of Range The phone displays Searching when it is out of range When reaching the maximum range during the call you hear an audible warning if Coverage warning is enabled You have enough time to come back to the coverage zone before the call terminates Low Battery Visual and audible indicators warn of the low battery level
9. power button and wait for network registration Login account must appear Dial the sequence 99 Follow the voice prompts to enter your extension and password Example extension 1 000 password 4Ag Z Sequence 99 AC 1000 42479 1 Important nsert your password as shown in example Password 4Ag7Z gt gt gt Type 42479 mona For more informations www wildix com w air Operations Incoming call The handset starts alerting an incoming call on the screen The caller ID is displayed Press the Green key Offthook key to answer If the feature Auto answer is enabled simply remove the handset from the cradle charger The received phone number is stored in the call log Pre dial a call Enter a number or select a contact from the phonebook Press the Green key Off hook key Enter a prefix if needed when calling the outside line W AIR cordless phone User Manual End a call Press the Red key On hook key to end a call If one call is active and another one is on hold press the Red key to end the active call and to resume the call on hold Press the Red key again to terminate the call Hold and Retrieve Hold Press Hold to put a call on hold and make another call Press it again to retrieve the call Press Hold to swap the calls or to pass from one call to another one Swap You can swap the calls switch between two calls E g if the call 1 is active and the call 2 is on hold press Swa
10. rdless phone User Manual 13 Contacts Italy France 39 0461 1715112 33 176 747 980 support wildix com support wildix fr W AIR cordless phone User Manual 14
Download Pdf Manuals
Related Search