Connecting the base
Contents
1. gt Press the message key a on the handset If New firmware available is shown in the display updated firmware is already available for your phone Press the right hand display key I The new firmware is loaded This takes approx 6 minutes The message key La will now flash again gt Press the message key k to start configuration a Starting the IP assistant Start IP The IP wizard helps you to wizard configure an IP Yes gt Press the key below IZA on the display gt Press the down of the control key 23 to scroll down right display key gt Press the a display key to continue If the connection assistant does not start correctly or if you cancel the connection assistant you can start it via the following menu on the handset press right F gt Telephony gt VolP Wizard 10 Configuring the VolP connection The configurable IP connections are shown in the following displays IP 1 to IP 6 VoIP connections that are already configured are marked with M gt If necessary press down on the control key to select a connection gt Press the JJ display key to continue Provided that your phone is set for auto configuration default setting you will see the following display Otherwise for more information see Ej If you have received a regis If you have received an auto tration name password configuration code gt Press the key2. gt Using your telephone may affect nearby medical equipment Be aware of the technical conditions in your particular environment e g doctor s surgery gt Donot hold the rear of the handset to your ear when it is ringing or when handsfree mode is activated Otherwise you risk serious and permanent damage to your hearing Your Gigaset is compatible with the majority of digital hearing aids on the market However perfect func tion with all hearing aids cannot be guaranteed The handset may cause an unpleasant humming or whistling noise in hearing aids or cause them to over load If you require assistance please contact the hearing aid supplier Do not install the base and charger in bathrooms or shower rooms The handset base and charger are not splashproof The charger and base are designed for use in dry rooms in a temperature range of 5 C to 45 C Do not use the phone in environments with a potential explosion hazard e g paint shops Never expose the telephone to heat sources direct sunlight or other electrical appliances Protect your Gigaset from moisture dust corrosive liquids and fumes If you give your Gigaset to a third party make sure that you also give them the user guide Remove faulty bases from use or have them repaired by our Service team as they could interfere with other wireless services All electrical and electronic products should be disposed of separately from general household waste using designated local authorit
3. base to the Internet connection via router and modem or via router with integrated modem PC in LAN optional for advanced configuration of the Gigaset A510 IP base station Preparing the handset 1 Inserting the supplied batteries and closing the battery cover gt Check the polarity when inserting the batteries see symbols in or on the battery compartment gt Use only the rechargeable batteries recom mended Once the batteries have been inserted the handset switches on automatically gt First insert the tabs on the top of the battery cover in the recess on the housing A gt Then press the cover until it clicks into place B gt The display is protected by a plastic film Please remove the protective film Connecting the charger and charging the batteries gt Place the handset in the charger and wait until the batteries are fully charged approx 6 5 hours gt Observe the sequence A B Do not put the handset back in the charger until the batteries are fully dis charged through use After the first battery charge and dis charge you may place your handset in the charger after every call The battery charging status is displayed in the idle display C C3 C mm empty to full Connecting the base Connecting the phone cord and power lead to the base A Insert the flattened phone cord into the lower c
4. below on the display screen and if applicable a user Do you have name auto conf code gt Press the key below td gt For more information on the display screen No Yes see EJ gt For more information see IJ If your phone cannot establish a connection to the Internet one of the following messages is displayed IP address not available or Internet conn not available gt Press the right display key jd to end the VoIP wizard and start the connection assistant step EE Further information about possible error causes can be found in the user guide on the enclosed CD 11 Configuring the VolP connection 9 Entering an auto configuration code gt Enter your auto configuration code using the keypad max 32 characters conf code gt Press the right hand display key IJA Enter auto 5 K All data required for VolP telephony is loaded directly from the Internet to your phone Following successful download IP account is registered is ae shown in the display T Proceed as described under B 10 Selecting a provider and loading provider data to the base Select Country Select Provider Germany Provider 2 Back J gt Select your country with the control key gt Select your provider with the control key press down arrow press down arrow gt Press the display key fed gt Press the display key J The general access data for your VoIP provider will be downl
5. Gigaset A5101P Congratulations By purchasing a Gigaset you have chosen a brand that is fully committed to sustainability This product s packaging is eco friendly SUSTAINABLE To learn more visit www gigaset com PACKAGING GIGASET INSPIRING CONVERSATION MADE IN GERMANY Safety precautions Warning Be sure to read this user guide and the safety precautions on the CD before using your telephone Explain their content and the potential hazards associated with using the telephone to your children gt Use only the supplied power adapters as specified on the back of the base or charger Use only the cables supplied for fixed line and LAN connection and connect these to the intended port only gt Use only the recommended rechargeable batteries as this could otherwise result in significant health risks and personal injury For example the outer casing of the batteries could be damaged or the batteries could explode The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type gt Insert rechargeable batteries with the correct polarity and use them in accordance with the user guide polarity symbols are displayed in or on the handset battery compartment gt Batteries should not be disposed of in general household waste Observe the local waste disposal regula tions details of which can be obtained from your local authority or the dealer you purchased the product from
6. Instead of using the following procedure you can also enter the VolP access data and the assign ment of the VoIP connection as send and receive connection using your PC steps EA to KA gt Launch the Web browser on your PC gt Enter the URL www gigaset config com in the address field of the web browser and press the return key You are connected to your base s Web configurator To register with the Web configurator you will need the system PIN for the phone default setting 0000 A description of the Web configurator can be found in the user guide on the enclosed CD and in the Web configurator online help document Prerequisite for the following steps Before you can use VoIP to phone any other subscribers on the Internet the fixed line network or the mobile phone network you need a VoIP account gt Set up a VoIP account with a VoIP provider gt Have your VoIP account data you received from your VoIP provider to hand You will need gt Your registration name login ID your password and if applicable provider dependent a user name often this is your VoIP phone number Or gt Your personal auto configuration code activation code if your provider supports automatic configuration Configuring the VolP connection Starting the configuration process When your handset is sufficiently charged approx 20 minutes after you have placed it in the charger the message key wa on the handset flashes
7. e for your base is updated the user guide will also be updated and made avail able for download on the Internet at www gigaset com Keys and functions on the handset 4 cui l1 7 PORS Som 8 Tuv Display keys Start function displayed to the left or right of the bottom display line Talk Handsfree key Accept a call After entering number start dialling Switch between earpiece and handsfree mode key lights up i Control key Mute microphone press right Open directory press down Open list of online directories press down and hold Scroll through menus press up down Navigate in text End call key on off key End call cancel function press briefly Return to idle status press and hold Switch handset on off press and hold Fast access key press and hold Listen to messages on the network mailbox key Ring tone on off press and hold 4 D 8 key Keypad lock on off press and hold toggles between upper lower case and digits Message key Open call and message lists C Consultation pause key fixed line Connection overview Preparing the handset inserting the batteries Connecting the charger to the mains power supply and charging the batteries Connect the phone cord and power lead to the base Connect the base to the fixed line network and the mains power supply HAO amp Connect the base to the router in order to connect the
8. eens ae 1850777277 ee 97144458254 ltaly soay E 199 15 11 15 United Kingdom 0 84 53 67 08 12 cent 8 36 IVA al minuto da telefono fisso USA ied ana TEA asia 4 out gt 1 866 247 8758 della rete Telecom Italia senza scatto alla ris Vietnam c cece eee eeee 1900 545 416 posta mentre per le chiamate effettuate attra For questions about VoIP access please contact the respective service provider Please have your record of purchase ready when calling Replacement or repair services are not offered in countries where our product is not sold by authorised dealers 19 Authorisation This device is intended for analogue phone lines in your network Voice over IP telephony is possible with an additional modem via the LAN interface Country specific requirements have been taken into consideration We Gigaset Communications GmbH declare that this device meets the essential requirements and other relevant regulations laid down in Directive 1999 5 EC A copy of the 1999 5 EC Declaration of Conformity is available at this Internet address www gigaset com docs CE 0682 20 Issued by Gigaset Communications GmbH Frankenstr 2a D 46395 Bocholt Gigaset Communications GmbH 2011 All rights reserved Subject to availability Rights of modification reserved www gigaset com This user guide is made from 100 recycled paper Version 14 09 2011 l l l 1008 E43 A31008 M2230 R601 1 T
9. ered all the VoIP data fully and correctly the message IP account is registered will appear in the display after a short time The VoIP wizard is closed 13 Assigning the send receive connection Launching the connection assistant To call other parties using the newly configured VolP connection e g IP 1 you must assign the connection to one or more of the registered handsets as a send connection Default assignment The VolP connection is assigned to every registered handset as a receive con nection incoming calls can be received It is not assigned to any handset as a send connection The following is shown in the display a Assign connect to INT1 gt Press the display key I if you wish to change the setting for the send and receive connections of the handset with the internal name INT 1 No gt Press the display key I if you do not wish to change the setting for this handset The receive connections currently assigned to the hand INT 1 set are displayed You have to press down on the control key to scroll through the list receiv calls for Phone gt Press the display key JJ if you do not wish to change the setting The following steps are skipped Continue from e gt Press the display key if you wish to change the receive connection setting Receiv calls for If no calls to the VoIP connection IP1 are to be signalled on the handset IP1 gt Press right on the control key to
10. mber gt System related device specific passwords Further information about the Gigaset net service data saved can be found on the Internet at www gigaset net privacy policy A Connect one Ethernet cable plug to the LAN socket at the side of the base B Insert the second Ethernet cable plug into a LAN socket on the router Use the Ethernet cable supplied As soon as the cable connecting the phone and router is plugged in and the router is switched on the button lights up on the front of the base paging button Connecting the base ra Connecting the PC to the router optional You can change the settings on the phone s base using a PC connected to your phone via the router gt Connect the PC network connection to a free LAN socket on your router The procedure below requires that your phone is automatically assigned an IP address by the router i e DHCP is enabled on router and phone In exceptional cases e g if DHCP is not enabled on the router you will have to assign a fixed IP address to the base for LAN access You must enter this IP address on the handset before carrying out the following steps Further information can be found in the user guide on the enclosed CD The following handset menu can be used to make the entry EJ press right on the control key F gt System gt Local Network gt enter system PIN if required Configuring the VolP connection
11. n the Gigaset net online directory Follow the steps below if you wish to create and entry in the Gigaset net directory for your phone gt Press and hold the down arrow on the control key Press down on the control key repeatedly until Gigaset net is selected Press the display key fe A connection to the Gigaset net online directory is established Press the display key below DAM Press down on the control key E repeatedly until Own Details appears in the display and then press the display key fe Your Gigaset net number is shown in the display V V V V gt Press the display key below EH You will see the following display Your nickname 7 N gt Using the number keys enter the name that you would like to be listed under in the Gigaset net direc tory Back gt Press the right display key tera If an entry already exists with this name the message Nickn exists Please change will appear You will be prompted to enter a name again Exclusion of liability Gigaset net is a voluntary service provided by Gigaset Communications GmbH with no liability or guarantee for the availability of the network This service can be terminated at any time Data protection notice The nickname is saved on a central Gigaset server and appears in the Gigaset net directory You can receive calls from other users of the Gigaset net service under this nickname By entering your data you agree to having your data sa
12. oaded and saved on the phone If your provider is not in the list you must cancel the VoIP assistant gt Press and hold the end call key to return your handset to idle status gt Perform the configuration and the assignment of the send and receive connection using the Web configurator You will find more detailed information about this in the user guide on the enclosed CD 12 Configuring the VolP connection 11 Entering personal VolP account data gt To switch between upper and lower case and digits press the key several times if nec essary gt Characters entered incorrectly can be deleted using the left display key below KA The character to the left of the cursor is deleted gt You can navigate within the input field using the control key E press right left Provider Data Provider Data User ID Password hes gt Using the number keys enter the gt Using the number keys enter the authentication name user identification authentication password that you that you received from your VoIP provider received from your provider This entry is case sensitive This entry is case sensitive gt Press the right display key id gt Press the right display key A Depending on your provider you may be prompted to enter another name User Name Enter it as described above If the User Name is identical to the User ID you only need to press the right display key Crd Once you have ent
13. onnection socket at the rear of the base B Insert the power lead of the power adapter into the upper connection socket at the rear of the base C Insert both cables into their respective cable recesses Use only the supplied phone cord and the supplied power adapter Connecting the base to the fixed line network and mains power supply A Insert the phone cord into the fixed line network connection socket B Then insert the power adapter into the mains socket Keep the power adapter plugged in at all times for operation as the phone does not work without a mains connection You can now use your phone to make calls via the fixed line network Enter the number using the handset and then press the talk key J Connecting the base Connecting the base station to the router Internet Data protection notice When the device is connected to the router it automatically contacts the Gigaset support server to make it easier for you to configure the devices and to enable communication with the Internet services For this purpose every device sends the following device specific information once every day Serial number item number MAC address Private IP address for the Gigaset in the LAN its port numbers Device name Software version On the support server this information is linked to the existing device specific information gt Gigaset net phone nu
14. s are also available on the telephone hotlines for consultation Australia ccc cence 1300 780 878 Austria 0043 1 311 3046 verso la rete di altri operatori fissi o mobili con sultate le tariffe del vostro operatore Bahrain 97 317311173 Jordan 0 005 00962 6 5625460 1 2 Belgium 0 78 15 66 79 Kuwait 965 22458737 22458738 Bosnia Herzegovina X 033 276 649 Lebanon cc eevee 9611240259 Brazil 00 005 L 40033020 cc 9611236110 grandes cidades e regides metropolitanas Luxembourg 352 8002 3811 Custo de uma ligao local Malaysia 64 603 8076 9696 va wobec OR ah AAPA Re En eS 0800 888 3020 Malta 390 2360 46789 0 10 demais localidades Gratuito Mexico Bulgaria seese 359 2 9710666 01800 999 4442738 01800 999 GIGASET 0 50 eBpo Ha MuHyTa OT BCNYKN AbpxKaBU 3a Netherlands 045 0900 3333102 cTaynoHapHu Tenedoun 3a o6axgaHna OT 0 25 per minuut vast net Voor oproepen uit MOONNHN TenepoHN moxe ga nma gpyrn yenn het mobiele netwerk kunnen andere prijzen Canada 1 866 247 8758 gelden China 0 21 400 670 6007 RMB 0 11 New Zealand 055 0800 780 878 Croatia oana 01 2456 555 0 23 Kn Norway ese ee eee e eens 22 70 8400 0 233 032 727 45 0 35 25 86 00 09 231 13425 Oppstartskost 89 re 15 re pr minut
15. set to No 4 Yes Back 14 Assigning the send receive connection d Receiv calls for gt Press down on the control key to switch to the Phone A connection Select either Yes or No as described above lt 4 Yes gt Repeat the steps for each connection Back gt Press the display key J once you have finished con figuring the settings for the handset The updated list of receive connections is displayed one more time for you to check Press the display key to confirm the assignment INT 1 The send connection currently set for the handset is send calls via displayed Phone Phone gt Press the display key J if you do not wish to change Change the setting Skip the following step gt To change the setting press the display key QETA Which connection phone number should the handset INT 1 use to make a call send calls via gt Pressright on the control key E repeatedly until the required connection is displayed in the example lt P 1 IP1 gt Press the display key J to save the settings The connection selected here is used as the standard send connection on this handset if you briefly press the talk key after entering the number 15 Assigning the send receive connection Instead of a fixed connection you can also select Select at each call Each time you make a call you must then select the connection you wish to use You can go on to start the connection as
16. sistant for each additional handset registered to the base The following is displayed in sequence for each handset Assign connect to INT1 gt Perform steps a to f see above for each registered handset Completing the installation After successfully configuring the settings Connec assign completed is displayed briefly After wards the handset returns to idle status an example of the display in idle status The following are displayed Reception between the base and the handset good to low t no reception 10 53 Charge status of the batteries Battery almost empty less than 10 minutes talktime f FCS 4m 73 charging INT 1 Internal name of the handset You can configure five additional VoIP connections VoIP phone numbers on your Gigaset In the user guide on the enclosed CD you will find detailed infor mation about setting up configuring new connections and operating your phone as well as possible solutions to frequently asked questions and problems To ensure that you can always be reached via the Internet the router must be permanently connected to the Internet 16 Gigaset net directory entry Entering names in the Gigaset net directory Gigaset net is a VoIP service provided by Gigaset Communications GmbH which you can use to make free calls to other Gigaset VoIP users across the world Every Gigaset net subscriber can create an entry with a name of their choice i
17. t fra fasttelefon For samtaler fra mobil vil det gjelde egne priser FACE ey onae nih 33170706181 OMan 1208 709281 Bxt19 2 1 73 Co t d un appel local depuis une ligne fixe Poland esseeee eee ee es 801 140 160 France T l com Portugal 351 808 781 223 Germany 00ccceeesee ees 01805 333 222 custo de uma chamada local Der Anruf kostet Sie aus den deutschen Fest Romania 40 021 204 9130 netzen 0 14 pro Minute Anrufe aus den deut RUSS ive eos aae xateows 8 495 2281312 schen Mobilfunknetzen kosten h chstens 0 42 Serbiasy 2 s iei taia 0800 222 111 pro Minute Singapore 0 ceeee eeu 6735 9100 Greece teseesererereseee ee 801 100 0 500 Slovak Republic 02 59 68 22 66 4 428 sk Ce ee rosea TO ota ep Slavenila senesced vad canaceeded 015644171 SUSTOO TIG SAA GOIG 1G KANGE ATO KYNTO South Africa 2711 46 13 181 OwG IOX OUV AAEG XPEWOEIC Spall a po rera E eae ees 902 103935 Hong Kong n se 2763 0203 Sweden senedinin ie i aaa 87 509911 2389 7285 A Switzerland 005 0848 212 000 01 267 21 09 27 Ft K TaiWaN pisse ceieeateteesies se 02 266 24343 Indias aneneen nae oas Please refer to your Ea a ia n an TAA local warranty card Turkey 1 0216 459 98 59 Indonesia ccceceecece 62 21 5673813 Ukraine mange uae ments 380 44 451 71 72 een 62 21 888856000 United Arab Emirates 97144458255 Leas
18. ved 17 Making calls Making calls gt Enter a phone number using your handset s number keys Please note that even with local calls you must always dial the area code for calls via VoIP provider dependent You have assigned the handset a fixed send connection default assignment fixed line connection gt Briefly press the talk key J The number will be dialled via this send connection Or gt Press and hold the talk key The list of your phone s connections is displayed Phone IP1 IP2 gt Select a send connection and press the display key D the number will be dialled via the selected send connection You have assigned Sel at each call to the handset gt Press the talk key J The list of your phone s connections is displayed gt Select a send connection and press the display key DA the number will be dialled via the selected send connection 18 Customer Service amp Assistance Do you have any questions As a Gigaset customer you can find help quickly in this User Manual and in the service section of our Gigaset online portal www gigaset com service Please register your phone online right after purchase This enables us to provide you with even better service regarding questions or a warranty claim In order to con tact our customer service via email please use the email contact form from our Gigaset online portal after selecting your home country Our representative
19. y sites If a product displays this symbol of a crossed out rubbish bin the product is subject to European Directive 2002 96 EC Correct disposal and separate collection of used equipment will help to prevent poten tial negative consequences for the environment and human health They are a prerequi site for the re use and recycling of used electrical and electronic equipment For further information on disposing of your used equipment please contact your local authority your refuse collection service or the dealer you purchased the product from gt Please note that only terminals that are operated in house inside buildings may be connected to the ana logue TAE connection VVVVVV Vv v Warning The device cannot be used in the event of a power failure It is also not possible to transmit emergency calls Furthermore emergency numbers cannot be dialled if the keypad lock is activated l eN e e e E N Package contents Gigaset A510 IP base Power adapter for connecting the base to the mains power supply Phone cord flattened for connecting the base to the analogue fixed line network Ethernet LAN cable for connecting the base to the router LAN Internet Gigaset A510H handset Two batteries for the handset uncharged Battery cover for the handset Handset charger Power adapter for connecting the charger to the mains power supply Quick user guide and CD with detailed user guide for your Gigaset If the firmwar
Download Pdf Manuals
Related Search