1.SEEWORLD waterproof gps tracker S116 user manual.rar
Contents
1. password text the command password RPASH to the T SEEWORLD s SIM card number Succeeding reply Reset the password OK Failure reply Format wrong Note Only admin can operate 8 2 Obtain the longitude and latitude by mobile phone Obtain the longitude and latitude by mobile phone text the command password LOCC to the device s SIM card number Succeeding reply website longitude and latitude time data speed and Note any mobile phone number can operate Obtain the longitude and latitude by mobile phone text the command password ADRE reply language to the device s SIM card number reply language in Chinese reply language in English EN Succeeding reply the location information Note any mobile phone number can operate 8 3 Set time zone Set time zone text the command password SETZ ime zone to the device s SIM card number Succeeding reply Setup Time Zone OK Failure reply Format wrong Note Eis eastern time zone W is westem time zone Check IP and port text the command password CKIP o the device s SIM card number Succeeding reply IP address and port Note any mobile phone number can operate 8 4 Set the time interval when in static state orin moving Set the interval when in static state text the command password SCUP minutes 8 to the device s SIM card number Succeeding reply set static upload time Failure reply Format wrong For e2. Sales unit adress Sales unit Phone number TMain engine Is guaranteed for one year for non human damage Since the date of purchase 2 The situations listed below are not in the scope of warranty the users has to pay maintenance cost 1 exxeed the warranty period 2 disassemble maintein withour authorization 3 immersion break or bum ofcircuit board 4 damages from improper installatio use maintenance storage 5 damages of shell lens or intemal antenna 6 IMEI number is toared vague 7 warranty certificate is inconsistent with product model oF the certificate is altered 8 the damages due to force majeure Maintenance records Record one Maintenance Date unit Fault description 13 SEEWORLD Maintenance status IMET number Serviceman Record two Maintenance unit Date Fault description Maintenance status IMET number Serviceman 14
3. 5 1 2 Choose SIM card Please insert a SIM card to the device Please take dealer s advice as reference 5 1 3 SIM card installation Discharge the cover of the device and Uncover the SIM card holder Then insert the SIM card and cover SIM card holder as follows 5 1 4 Put back the front cover and screw it up 5 1 5 Connect the device to the 9 24Vpower supply ihe red LED constant glow 5 1 6 Install the device in the hidden place of the car Note The SIM card can not be inserted in wrong way The SIM card must be with GPRS function and enough deposit 5 2 Installation The GPS tracker must be installed under professional personnel Note 1 Please install the device in the hidden place as folowings Under Front winshie In the front instrument panel Under back windshield 2 Avoid being placed with signal radiators like reverse sensor 3 The device has GSM antenna and GPS antenna inside Please ensure the receiving side of the device is face and 5 SEEWORLD without metal cover Note the metal cover will lessen the receiving of GPS signals 6 The device connecting requirements 6 1 The device power supply is DC 9 24V The red ine is positive pole while the black line is negative pole 6 2 The negative pole of power supply connects with ground or the metals Please not connect with other ground lines 6 3 When finishing the power supply wire connection please make the plug of power supply to th
4. SEEWORLD Waterproof GPS Vehicle Tracker GPS GSM GPRS Model S116 User Manual Version 1 0 SEEWORLD T Accessories As X Battery cables Screw Screw cover standard standard Relay optional SEEWORLD 2 Specification 2 1 GSM frequency 850 800 1800 1800MHz 2 2 GPRS Class12 UDP 2 3 Working Voltage 8 24V DC 24 Working Current 22mA 12 00 2 5 Working Current 12mA 24vDC 2 6 6 5 locating time cold start 38s Open sky Hot start 2s Open sky 2 7 GPS precision 10m 20 RM 2 8 Working temperature 20C 470C 2 8 Working Humidity 20 B0 RH 2 10 Measurement 87 L 43 W 14 H mm 3 Outlook SEEWORLD 4 Device status indicators 4 1 left red LED power working condition Connect DC 9 24V power supply and the red LED will ight continuously 4 2 Right green LED GPS signal indicator The LED gistens when getting the GPS signals normally When the LED can not light or light continuously the GPS can not get the signals 4 3 Blue LED in the Middle GSM signal indicator The LED glistens when getting the GPRS data normally When the LED can not ight or ight continuously the GPS can not get the signals 5 Installation SEEWORLD 51 Preparation for the instalation 8 1 1 Product Check Open the packing box and check the device s model and accessories If modelis wrong or the accessories not complete please contact the dealer
5. authorized number 2 Succeeding reply Add Authorization account 1 OK Failure reply Format wrong For example you set 13500135000 as authorized number 1 the text commands BBABSALTIBTOSO0 125000 Note Oniy admin number can operate Delete authorized number txt tne commandspassvordHDAUT to the device s SIM card number 18 authorized number 1 25 authorized number 2 Succeeding reply Del Auth account 1 OK Failure reply Format For example if you want to delete the authorized number 1 the text conmandis 8 8 Note Ony admin number can operate Deli an the auhorzed number the conmandipassword DLAL t the device s SIM card number succeeding Dele all Auth number OK Failure Format wrong Noto admin number can operate Check the authorized number 8 Cnecktne authored number text commandpasshord CKAU 10 the device s SIM card number Succeeding Authorizatont mobie phone number Authorizaton2 mobile phone number Authorization3 mobile phone number Faile reply Format wrong Note Any number operate 8 1 5 Revise andinitalze password 8 Reuse password text tbe command password CPASHNW password t the device s SIM card number Succoedingrepiy change password OK Failure reply Format wrong or Dont allow to change passwort For example i you want to change the passwordG888 to 2345 txt the Command 0382 2345 Note Oniy admin can operate _
6. e device 6 4 Concealed installation 7 The Device Working 7 1 Power on when the device is power on the red LED should be in constant glow the green GPS LED should be gisten and the blue GSM LED should be gisten 7 2 Power off pull off the power plug then power off the device 8 User settings 8 1 Set admin and authorized number 8 1 1 Set and delete admin number Set admin number text tha commandsstpasswordtADM imobila phone number to the device s SIM card number Succeed Add admin account 1 Fall Format wrong For example set 13500135000 as admin number 1 text the command 5001350008 Note when no admin any mobile phone number can set the device Delete admin number text the command password DAD 1 to the device s SIM card s number is admin numbert 2is admin number 2 succeed Dele admin account 1 Format wrong or too long For example if deleting the admin 1 pleas text the command 18 Note only admin operate 8 1 2 Check the admin number Check the admin number text the command password CKAD to the device s SIM card number Succeeding reply Admini mobile phone number Admin mobile phone number Failure reply Format wrong Note Any mobile phone number can check the admin number 6 SEEWORLD ATT 340 authorized number ommansifpassworskAL T1Emobil phone number to the device s cara umber ts authorized number 1 2
7. evice s SIM card number Succeeding reply Close vibration Alarm OK Failure Format wrong Note Only admin and authorized number can operate If you want to restart the vibration alarm you need to reset again 8 8 restart the device s SIM card restart the device s SIM card text the command password REST o the device s SIM card number Succeeding raply Reset System OK Failure reply Format wrong Note Only admin and authorized number can operate Note the default password is 8888 Only admin and authorized number operate If not the server will reply Don t allow to The Admin must be number Fail 3 Check the location by texting 8 1 admin number or the authorized number dial the device s number the device will text back with location information 9 2iongitude and latitude and location check by texting 921 the command format password LOCC 10 SEEWORLD Reply web Ink longitude and latitude me data speed 3 3 Chinese location check by texting 934 the command format password ADRE reply lanquaget Reply the current location 410 Trouble shooting 10 1 The device is not online on the web platform 10 1 1 First please check the three LED working state if possible you can cal the device s number to check if not connected the device is out of signal If reminding the device SIM card is of deposit please make deposit by the telecom operator If romindi
8. ng the device is power off please turn back the device and proceed as followings Check if the red LED is in constant glow if the LED is dark please check the power connecting If fuse is broken please retum the device to the seller b If the blue GSM LED is not in constant glow please check the installation of SIM card 10 1 2 Please check the offine area in order to judge if the network problem of operators 10 2 When GPS can not receive the signals please drive in the open sky and ensure there is no metal thins on the device 10 8 When the device can not receive the GSM signal please check the SIM card installation 10 4 The LED is not glow when power on Check the fuse of the Power line If the fuse is fused please change the fuse with the seller SEEWORLD Warrantv card of GPS Vehicle Tracker Special statement 1 Technique of this product subject to change without further notice 2 Anv change about the appearance and color is subject to the real object 3 Warranty card applies to the product with the IMEI number listed below 4 Please keep this card safely for the after sale service as well as your receipt 5 Refer to the table below for the warranty reference This card is the basic certificate for warranty lease fill it carefully and keep is safel Name Phone number Adress Model IMEI number Date invoice number 12 SEEWORLD Sates unit
9. rs the device only cut off the circuit on the condition of the driving speed below 20KMIH or in static state When the vehicle speed is over 20KM H the device will cut off the or the power when the speed below 20KM H 8 8 Set or cancel the over speed alarm Set the over speed tet command password SOSA speed to the device s SIM card umber Succeeding reply Set speed alarm OK Failure reply Format wrong For example if you want to set the over speed alarm at 120Kmih please text the command 8888885 5 81208 Note Only admin and authorized number can operate g SEEWORLD Cancel the over speed alarm text the command passwordiOL to the device s SIM card number Succeeding reply Close Speed Alarm OK Failure reply Format wrong Note The default of this function is closed Only admin and authorized number can operate 8 7 Set and cancel vibration alarm 8 Set the vibration text commandi password STVA sensitvity value to the device s SIM card number Succeeding reply Set vibration Alarm level OK Failure reply Format wrong For example if you want to set the sensitivity 2 text the command EBBBESTVA ZE Note The default of this function is closed Only admin and authorized number can operate the sensitivity value of the vibration is from 1 to 3 fis the most sensitive Canceltho vibration alarm text the command password CLVA o the d
10. xample if you want to set the time interval of static state as 3 minutes texi the command 8886 SCUP 3 Note the defaut is 5 minutes Only admin and authorized number operat SEEWORLD Sat The ime inal when In mowing tate tex The commandi password MVUPHseconds to the device s SIM card number Succeeding reply set movement upload time OK Failure reply Format wrong For example if you want to set the time interval of moving state 12 Seconds text the command 8 8 128 Note the defaut is 10 seconds Only admin and authorized number can operate Cancel continuous location txt the commandi password NOUP to the device s SIM card number Succeeding repy close Upload GPS informaton OK Failure reply Format wrong Note Only admin and authorized number can operate 3 5 Cutoff and resume the circuit 8 Cut off the oll text the command password STOPE to the device s SIM card number Succeeding reply please waiting When speed lt 20 to break the car ollOthenvdse need ta speed lt 20 only enter into processing Then Fuel cut has already been compieted Failure reply Format error Note Only admin and authorized number can operate Resume circuit text the command password RUN o the device s SIM card number Succeeding Resume fuel OK Failure reply Format wrong Note Only admin and authorized number can operate In order to ensure the safety of derive
Download Pdf Manuals
Related Search