DIGITAL DOOR VIEWER USER MANUAL
Contents
1. DIGITAL DOOR VIEWER USER MANUAL The following rights are reserved e Any changes without previous notice made to either the functionality or appearance of this product will invalidate the guarantee 6 Use of this product in any environment or in any way other than specified here will also invalidate the guarantee Attention 1 Please read this user manual carefully before using our product 2 Never attempt to repair or modify this product or its accessories by yourself to avoid injury and invalidating guarantee 3 Any accidental factor such as being struck by lightning or any incorrect operation could cause amemory loss on the SD card Keeping copies of the videos is strongly recommended in case of memory loss We are not responsible for any loss of data 4 DO NOT use any chemicals to clean this product such as alcohol or benzene thinner 5 Please change the batteries soon after the low battery indicator shows in order to avoid any damage to this product which could be caused by battery weeping LCD Screen 1 fixing screw G 4 AA batteries Holding plate Camera Locking barrel Tightening tool A cs a es ee ees KAN ee Installation instructions 1 Replace the existing door viewer or drill a 14mm hole in the door at the required height insert the camera from the outside Making sure the washer is fitted between the camera and the door Ensure the bell push is at the bottom and adjust so that the cam2. 10
3. 10S 20S 30S OFF 20S is the default mode which is the best option for balancing the power consumption and operational convenience OFF mode is for laboratory test and for customers with special needs Caution in this mode the screen will stay on until manually turned off if not turned off the batteries will quickly run out of power Visitors When visitors press the door bell button on the door viewer camera the door bell will ring inside of the room At the same time the screen inside the door will turn on automatically to show the outside images and will last for 20 seconds before turning itself off Also as the door bell is pressed the camera will automatically take a photo of the visitors and the photo will be stored in the TF card in case the host is out so as to check the visitors identity or to use the information for security purposes To view outside Press the power button an image of the exterior will be shown on the screen The screen will automatically power off after 20 seconds with no other operations After turning on the product press on the power button again and the product will be turned off To check outside and take photos or videos When viewing outside with this product photos or videos can be taken at the same time When the screen is on press to take a photo To take a video press the till the instruction icon appears to 8 switch into video taking mode and press to sta
4. era is perpendicular to the horizon FIG 1 2 Peel off the 3M stickers on the holding plate and fit it over the end of the lens then screw the locking barrel on to the threaded sleeve of the camera and tighten This will hold the plate to the door Make sure that the arrow on the plate points upwards FIG 2 3 The data wire should be fully plugged in at the back of the screen excess wire should be gently placed into the groove at the back of the screen 4 Hook the screen over the bracket at the top of the plate and secure with one small screw through the hole at the bottom of the screen case FIG 3 hook the screen case fix the screw FIG 3 Installation and replacement of batteries Installation 1 Slide the lid upwards and open outwards as shown in diagram 99 66 99 2 Put in the batteries according to the sign on the lid 3 Take the reverse steps to close the lid Attention 1 DO NOT force when opening and closing the lid to avoid damaging the lid 2 DO NOT press the lid to the opposite direction when open to avoid any damage to the lid 3 When the low battery indicator is on please replace the batteries t to avoid any damage to this product by battery weeping a cs fit Fullpower C Nopower The battery icon shows the power state When the power is reducing the bars in the icon will reduce But as for some dry batteries or rechargeable bat
5. mode Camera Video ON OFF Some countries and areas have strict rules that no one is allowed to take photos or videos ofother people without permission so users can choose ON OFF of the camera video Press menu button to enter camera menu when the mode is ON this product will automatically take a photo when the door bell is pressed users can also use the right button to take photos or video When the mode is OFF all the photo taking video taking function will turn off 9 If you choose the Factory reset option all the settings will be reset to the original state All the user settings will be cleared Be cautious Infrared function This product has an infrared function which enables user to observe outside images at night or in dark areas Due to the image forming principle all images shown on the screen are black and white form which is normal The recorded photo and video format The photos are taken in jpeg format and the videos are taken in MP4 format Users can scan and edit these photos and videos on windows PC Specifications Door thickness 40 70mm Door barrel diameter 14 26mm Camera 0 3 mega pixels LCD Screen 3 5 TFT Power 4 AA batteries Memory card Micro SD card TF max 8GB Photo volume for 1GB 15000pc lab condition the actual volume could differ under different circumstances Inferred wavelength 940nM Size 135 L x 86 W x 25 T mm Weight 310g
6. rt shooting one more press of will end the video taking All videos taken have no sound Operation x Replay and edit of the stored photos videos The stored photos and videos can be played on this product and can also be deleted or edited When the screen is on press the till the xx icon appears which indicates the replay mode is on Select the photo or video you want to play using the aw button Ifyou want to delete certain photos or videos select it then press menu button to edit Other setting options Different languages are available in language setting The mains power frequency differs in different countries and zones To achieve the best results please adjust your settings according to your local mains power frequency Setting reference electric between 100 120V the corresponding setting is 60Hz America Japan etc Between 220 240V 50Hz Europe etc To format the memory card please choose this option This process cannot be reversed once the process finishes all data and operations in this card will be removed Be cautious Door bell Users can set the type and volume of the door bell Choose the door bell setting press menu button to enter and press up button to choose door bells Choose the High mode to maximize the volume Choose the Low mode to turn down the volume to 70 ofthe maximum Choose the OFF mode to turn off the door bell into DND Do Not Disturb
7. s on the volume of the memory card Shows full battery Shows 70 battery left Shows 40 battery left Door bell state icon Power state icon Shows battery is running out Operations Memory Card Installation Please insert the memory card before installing the batteries Before inserting the memory card make sure the marked side is facing the front when you hear a click the card is locked and fitted correctly This product will take a max 8GB SD memory card To remove the memory card press the card and it will pop out approximately one third you can then remove the card This product supports hot plugging System time and date setting Please set the system date and time after installing the batteries Press menu button shift the selection key to date setting and 7 press menu button to enter Select setting the date key press the menu button to enter and use lt a gt key to select the digit to be set and use av to adjust the number If you want to add date and time information on the photos you can choose the time amp date display ON otherwise choose OFF Auto power off setting this product has user defined setting for auto power off if you need to change the default setting please press menu button then choose the auto power off and press menu button to enter There are 4 options to choose in this menu
8. teries the power state in the icon could be unstable which is normal When the batteries run out this icon will be in blank which indicates the user to replace the batteries The following types of batteries can be used in this product AA LR6 1 5V alkaline battery Any abandoned batteries should be disposed according to local environment protection rules and regulations Operation instruction Parts specifications The front part of the screen case Button functions basie function Upward shift Downward shift enu Left shift only in menu setting selection key to replay mode in normal use Right shift only in menu setting start shooting key in normal use Power button Se Back side of screen case 7 TF card socket 8 camera data wire connector 5 Operation instructions Parts specification Camera front view Camera side view 1 Camera 2 Door bell button 3 Data wire Menu interface instruction R 4 00000 oo 2011 01 01 Function photo shooting mode Mode directing icons __ t Video shooting mode CD Playback mode for photos or videos B This icon shows the TF card is plugged in and is recognized by the system TF card plugged in icon This icon shows the normal door bell mode oX This icon shows the DND do not disturb mode max 99999 pictures storage Picture memory depend
Download Pdf Manuals
Related Search