a guide to your teLStra t
Contents
1. Auto Pickup Settings Auto Handsfree will automatically put all calls on handsfree when the call is answered The handset will remain in handsfree even if the handset is put back into the dock If the setting is Off the call will end when the handset is put back into the dock Cancel Auto Handsfree Settings 42 SYSTEM System Info The software version of the handset and base station or T Gateway can be accessed from Settings and selecting System followed by System Info System info Ee pes Handset enfwara DEW are m Lamm n Ji System info nnnnnnnnnnnnnnnnnn Registration Base sofware TELELLEELIE ELLE D aes a a 8 EIL ba eri xum sme E CTLTLT Ug EE CUP E ECOL Cancel System Info Settings Handset software displays the software version of the handset Base software displays the software version of the base station or T Gateway that it is registered to Base IP address this give the IP address of the base station or T Gateway Note the IP address will not be presented if the T Hub 2 Base Station is not connected to a modem router using an Ethernet yellow cable 43 Registration If the software upgrade is interrupted for any reason batteries go flat handset out of A handset can deregister another phone or tablet or deregister itself range batteries removed the software upgrade is stopped but will restart automatically Once de registered the handset will show the Not r2. Set as speed dial to choose a shortcut from idle to dial this number long press on the digit will call that number directly Note Digit 1 is assigned to the voicemail number and cannot be assigned to another number Delete contact to delete this contact Memory status to know the remaining space available to save contacts Synchronise to force the contacts to be synchronised between the base station or T Gateway and the tablet Contacts options Cancel Contacts Options Screen 29 EDIT A CONTACT To edit a contact Select the contact select the Options soft key and select Edit Use the Up and Down keys on the handset to move between fields Press the Save soft key to save or press the Cancel soft key to clear digits or characters in the field ADD A CONTACT To add a contact Select Contacts from the handset Home Page Press the Options soft key Select Add contact Edit the necessary fields Add a contact from the Call Log Select the Call Log from the handset Home Page ocroll down to the phone number Press the Options soft key Select New contact or Add to existing contact i LAA m owe a a m hae et PU exen i ir Of T e Di si sa a m x EM T C coo rk ao sp 2 Default Home Save Cancel Edit Contact Screen Create a Contact Screen Alternatively add a contact by typing in the number from the Home Screen and then select Option to add the number to Contacts 30 DE
3. match the number will be displayed When a callis received with an unknown number the handset will display Unavailable in the incoming call screen When a callis received with a private number the display will show Private in the incoming call screen REJECTING ANSWERING AND ENDING THE CALL Rejecting a Call Reject a call by pressing the Power key ki or pressing the left soft key named Silence The ringtone for that handset shall be silenced All other handsets and tablets registered to the base station or I Gateway will continue to ring Answering a Call The call is answered by pressing the Talk key ki The callers details and call duration is displayed Ending a Call The call is ended by pressing the Power key ki or by the other party Pr E m m 02 3496 890 E Options hlute Rejecting a Call Answering a Call Ending a Call INCOMING CALL DURING A CALL To take an incoming call when on another call select Answer on left soft key Once the incoming call has been accepted swap between the incoming call and the other call by pressing the Swap button John Ford 10 52 02 3406 590 Rejeci Options Swap ANS wer Incoming 2nd Call Incoming Call on Hold Note Select Reject to reject the incoming call The call waiting beeps will continue in the background until the calling party hangs up If the internal call is released by one of the handset or tablets the remaining handset or tablet is automa
4. of 24 months from date of purchase We do not warrant that the product will be free from defects caused by an accident misuse abuse improper installation or operation vermin infestations lack of reasonable care unauthorised modification loss of parts tampering or attempted repair by a person not authorised by Telstra or where the product has been damaged by lightning or a mains power surge Where a valid claim is made under this Voluntary Product Warranty we will at no cost to you repair or replace the product within a reasonable time Subject to your Statutory Rights if your claim under this Voluntary Product Warranty is not valid you may be charged a fee under this Voluntary Product Warranty for the service and for any direct costs associated with having the product delivered for service To make a claim under this Voluntary Product Warranty you must provide proof of purchase and call Telstra T Hub Support on 1300 136 841 to arrange at our expense for a prepaid return satchel for you to send the product and all the components from the original purchase Alternatively you may return the product and all the components from the original purchase to a Telstra Shop to make a claim under this Voluntary Product Warranty 48 The benefits conferred by this Voluntary Product Warranty are in addition to other rights and remedies that are available to you under law which cannot be excluded The processes for this Voluntary Product
5. A GUIDE TO YOUR FOR MORE INFORMATION IT S HOW CALL 1300 136 841 WE CONNECT VISIT telstra com thub VISIT A TELSTRA STORE This guide will help you get started as quickly and easily as possible It ll help you get connected and show you all kinds of ways to get the most from your T Hub 2 Handset You ll be making calls in no time For more information on using your I Hub 2 Handset visit telstra com thub or visit Telstra Crowd Support at www crowdsupport telstra com au Let s get started Preparing the handset Registering your I Hub 2 handset Handset setup A closer look at the T Hub 2 handset Calling Battery Home screen amp event notifications Taking a call Rejecting answering and ending the call Incoming call during a call Outgoing call Internal call Transferring a call between handsets Call waiting 3 way call Make 2nd call Paging 26 Calllog 26 Contacts 27 28 30 30 31 Contact synchronisation Contact list Edit a contact Add a contact Delete a contact 31 Settings 32 35 38 40 43 4h 45 sound Display Time Call features system software updates Keypad lock 46 Troubleshooting 46 46 47 47 Contacts ooftware updates Registration oettings 48 Customer Service and Product Warranty LETS GEI STARTED PREPARING THE HANDSET Remove the back cover of the handset Insert batteries inthe handset Replace the handset cover KR 00 n Place the h
6. CT button 3 On the handset press OK to start registration this may take up to 60 seconds to complete Once registered the handset display will read Handset registered An antenna symbol will also appear on the top left hand side of the handset screen lid 4 lo test that you have dial tone press the Call button on the handset ki HANDSET SETUP You can choose to place your handset anywhere in your home depending on whether or not you want to dock it together with the base station or I Gateway The advantage of docking your handset is that you only need one power supply which saves on clutter If you want to locate your handset separately to your base station or T Gateway simply choose a location for your handset dock near a power point in your preferred room and plug it in If you want to locate your handset together with your base station or T Gateway follow these simple steps 1 Remove the plastic cover from the bottom of the base station by pulling it towards you 2 Push the handset dock into the cavity at the bottom of the base station it should click into place 3 To remove press down on the lever under the handset dock and pull it away from the base station CONNECTING THE HANDSET TO THE T GATEWAY To connect the handset to the T Gateway 1 Remove the plastic cover from the bottom of the T Gateway by pulling it towards you 2 Push the handset dock into the cavity at the bottom of the T Gat
7. LETE A CONTACT To delete a contact select Contacts from the handset Home Page select the contact to delete Press the Options soft key select Delete contact Contacts e Delete contact Cancel Delete a Contact Screen RINGTONE Itis possible to assign a ringtone to a contact when creating or editing a contact SETTINGS Use the Settings function to agjust the Sound Display Time Call Features System SOUND Modify the ringtones ringtone volume handset and speakerphone volume and alert tones Sound Settings Screen Ringtones Modify the ringtone to be played for incoming external or internal calls In ar calls Hingtones External calls n E a um Lh s t Ca PC Es C a Ti LJ a CL C OQ CL O em 1 a 4 Me cm CJ e Cance Ringtones Setting Screens 32 Ring Volume Modify the volume of the ringtone By default itis set on Level 3 Handset volume Modify the volume of the handset when on a call By default it is set on Level 3 Speaker volume Modify the volume of the call when it is on hands free By default it is set on Level 3 Ring volume Handset volume Speaker volume OK Cancel Ring Volume Screen Handset Volume Screen Speaker Volume Screen 33 Voicemail alert DISPLAY Turn the voicemail alert tone to off or on It is set as On by default Wallpaper The wallpaper can be selec
8. Warranty in no way limit your rights which arise as a result of your Statutory Rights This Voluntary Product Warranty is given by Telstra Corporation Limited ABN 33 051 775 556 Business address 242 Exhibition Street Melbourne VIC 3132 Phone number 1300 368 387 Email address customerfeedback team telstra com Please note These contact details are not product return or service contact details To make a claim in relation to this Voluntary Product Warranty please call Telstra T Hub Support on 1300 136 841 or visit your place of purchase Statutory Rights Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure ang are trade marks and registered trade marks of Telstra Corporation Limited ABN 33 051 775 556 49
9. andset into the handset dock and connect the dock to mains power using one of the power supplies provided You can now turn the handset on by pressing and holding down the Power key ki Note It is recommended that the Handset is charged initially overnight to get optimum battery performance REGISTERING YOUR THUB 2 HANDSET Once the handset is registered you will be able to make and receive calls manage contacts and access voice messages If your T Hub 2 Handset came as part of a T Hub 2 Kit it will already be registered to the T Hub 2 Base Station You can always tell if your handset is registered as it will always display the home screen 15 45 Handset ere Speaker Handset Home Screen TO REGISTER YOUR T HUB 2 HANDSET 1 If you have not done so already turn on your handset It will prompt you to register the handset select Register handset and press OK 2 Your handset will then prompt you to prepare the base station for registration Registration Registration Registration Fress and hod the bu on down on the base for 3 seconds then press OK Registration Screens e f you have a base station press and hold down the Page button for 3 seconds until the LED light is flashing blue Page Button e f you have a T Gateway press the white DECT button which is located on the back for 3 seconds The DECT LED on the front of the T Gateway should now flash orange WPS button DE
10. at are created on the Handset from being shared across other T Hub 2 handsets or Tablets No SOFTWARE UPDATES How long does it take to update the software on the Handset After it has been downloaded it should take no more than 10 minutes to upgrade the handset How do know that have the latest software on the Handset Check the software version on the Handset by going to Settings gt System gt System Info gt Handset Software and check it against the software version outlined on www telstra com thub FAQ s What does it mean if Handset LED is flashing red When the Handset LED is flashing red it means that they are in the process of downloading and installing a software update Do not remove the power or the ethernet cable from the base station during an update otherwise the handset or base station may be damaged Red LED static when off dock means that the battery status is low 25 Red LED flashing when off dock means when the battery status is very low almost empty lt 5 Does the software update count towards my usage No All software updates are unmetered 46 REGISTRATION How can I connect an existing cordless telephone to the T Hub Base Station For non T Hub handsets refer to the User Manual for that device for step by step instruction on how to set up the handset for registration The registration setting can usually be found within the Settings section of the handset Once the handset is ready ho
11. ds Screen All the fields defined in Contacts are synchronised with the Tablet There are more fields available on the T Hub 2 tablet however they are not visible on the handsets CONTACT SYNCHRONISATION When anew contact is stored modified or deleted on the handset synchronisation is automatically performed between the tablet handset amp the base T Gateway The contact will be stored in the BigPond account setup during the installation Wizard 27 CONTACTS LIST From the handset home screen the contacts list can be accessed by scrolling to the Contacts icon and pressing OK The first line is used for performing a quick search By typing in text the contact list will jump to the contact result that is closest to the entry A selected contact will display the First Name and Last Name and the default phone number Browse the list of contacts with the UP and DOWN keys If the contact has more than one phone number change the number to be called by scrolling with LEFT and RIGHT keys To make a call press the Talk key or press OK it will dial the selected number T 5 joe E d CJ J el r Ca iG T J rn ibt rh LS a C E Fri i e 1 ji na 4 f Contacts Screen 28 Once the contact is selected press the Options soft key and another menu will pop up Add contact to add a new contact into Contacts View details to see all fields of this contact Edit to modify contact fields
12. e AIL calls list During a call to decrease the volume of the callers voice To scroll left through menus fields To scroll right through menus fields To end a call To exit a menu When holding to switch the Handset off or on To make or receive a call During a call to switch to and from handsfree mode To enter numbers letters Hold this button down for at least two seconds to check your Voicemail Press this button to make an internal call to another Handset registered to the same Base station Press and hold this button to switch to an incoming call if Call Waiting is activated on your phone service BATTERY Charge Duration The T Hub 2 Handset will run for 3 hours of continuous use when fully charged When it is not in the dock being charged it will last up to 3 days This will be influenced by whether you fully charge the handset each time and environmental factors such as temperature To keep the battery in the best condition leave the handset out of the dock for a few hours at a time Charging the Batteries The handset battery icon in the top right hand corner of the screen shows how much battery life the handset currently has When the handset battery icon is showing as empty no bars you will need to recharge the handset by placing it back into the handset dock You may also hear a low battery warning beep if the handset Is being used while the battery is approaching empty While the hand
13. ed device automatically If the receiving handset doesn t answer the incoming call after 30 seconds the internal call will be automatically dropped When the internal call is terminated by either party the other handset will automatically hang up Internal call Ring all phones Phone 1 Phone 2 Handset 7 Cancel Reject Make an Internal Call Incoming Internal Call Active Internal Call 20 TRANSFERRING A CALL BETWEEN HANDSETS e To transfer a call to another handset or tablet that is registered to the base station or T Gateway select the Options soft key e Scroll down to select Transfer call and then select OK e Scroll down to the phone that the call is to be transferred to or select Ring all phones to ring all handsets and tablets and then select OK Internal call In call options m Contacts Make 2nd cali Transfer call Volume opeaker on Phone p gm m A a 02 3456 7890 OK Cancel Options Mute Cancel Call Answered In Call Options Transfer Call e When the other phone answers the internal call a link is established with the handset and the external caller hears silence e To transfer the call the handset that sets up the call needs to select Options using the left soft key and select Transfer call In call options Mute Speaker on Contacts Iransier call ERU call Call Transferred Transfer In Call Options 21 CALL WAITING Beeps will sound during a cal
14. egistered screen when the handset is once again available Once the upgrade is finished the screen will show Software update complete A press on the OK button will return the display to the Home Screen De Register Handsets KEYPAD LO CK The handset keypad can be lock and unlocked from the home screen by a long press on the key SOFTWARE UPDATES Press OK to unlock the keypad if you press any key It will still be possible to dial 000 if the keypad is locked Software updates are performed automatically The handset will check on a daily basis or each time it is turned back on against the base station or T Gateway to see if there is an update available When there is an update available the handset will initiate the installation process and preventing calls from being made or received Software Updates 44 45 TROUBLESHOOTINO CONTACTS can t see the contacts that are on my T Hub 2 Tablet on my T Hub 2 Handset Only those contacts that are created on the tablet and synchronised with the BigPond account setup during the installation wizard are shared across I Hub 2 Handsets and Tablets Contacts from other accounts such as Google Windows Live Facebook are only visible on the T Hub 2 Tablet can t see the contacts on my non T Hub Handset T Hub 2 contacts cannot be synchronised with non T Hub 2 handsets Are contacts created on the Handset always shared on the Tablet Yes Is there any way to disable contacts th
15. ernet Change the time on the handset manually however the handset call log will no longer be synchronised with the call log on all other devices registered to the I Gateway If the handset is registered to a T Hub 2 Base Station the time on the handset will be automatically synchronised with the base station which receives the time from the internet If the base station is not connected to the modem router using an Ethernet cable the handset time will have to be manually set Each time the handset batteries are removed replaced or the base station is turned off the time will have to be reset If the handset is receiving the time from the T Gateway or T Hub 2 Base Station it will automatically change for daylight saving Time 23 E21 a m mao oe ame Time format Time Settings 38 Alarm One alarm can be set to ring only once or on a daily basis The alarm is specific to the handset and does not synchronise with other T Hub 2 handsets or tablets registered to the base station Alarm Alarm Melody Melody af ta ye 2 Melody 2 3 Melody 3 4 Melody D Melk gy E uud M D M gog Y Cancel JK Cancel UK Lance Alarm Settings Time format Set the time on the handset to be displayed in 12 hour or in 24 hour format me format 24 hour OK Cancel Time Format Settings CALL FEATURES e Immediate forwards all calls immediately to a nominated number Modify the call waiting call forwardi
16. eway it should click into place 3 lo remove press down on the lever under the handset dock and pull it away from the T Gateway A CLOSER LOOK AT THE THUB 2 HANDSET 1 LED Indicator The LED indicator shows the status of the Handset LED INDICATOR HANDSET STATUS B Solid green Batteries near to fully charged L W Flashing green on dock Batteries charging Q E Flashing blue You are receiving an internal or external call You have one or more missed calls You have one or more voice mails pending B Solid red off dock Low charge 3 z JEt Flashing red off dock Very low charge batteries need charging Flashing red on dock Charging batteries 5 6 FEATURE DESCRIPTION 7 2 Volume control e To control the volume of the speaker on your 8 Handset 9 e During a call use the Up Down key to increase the volume of caller s voice 3 Left soft key e To select the option shown above it in the display 10 4 Rightsoft key loselect the option shown above it 11 in the display 5 OK Select button e To confirm or select e From standby to display new event messages on the display Up Down Left Right 6 End Power button 7 Talk button 8 Keypad 9 Voicemail 10 Internal calls 11 Recall To scroll up through menus lists From standby to open the Dialled calls list During a call to increase the volume of the callers voice To scroll down through menus lists From standby to open th
17. l if another call is received The name of the number or name of the caller will be displayed Select Answer to answer the call If the call waiting is answered the first call is put on hold and the call is established with the second call John Ford 10 52 02 3456 7890 Answer Call Waiting Note In the unlikely event that another call comes in while on an internal call and there is already an external call on hold the internal call will be dropped and the incoming call will be connected 22 Swap between callers by selecting the Swap soft key John Ford 10 52 ATE NS Ar a m 0 3456 7890 Swap Callers Note The call that is on hold is highlighted in blue on the screen e g John Ford The active call is highlighted in black on the screen e g 0234567890 Use the Options soft key to choose from a number of options including ending the current call Select Hang up active call to end the active call and switch back to the call that is on hold In call options I FELT LI F ct Speaker on Contacts transfer call d Way Call Transfer In Call Options 23 3 WAY CALL MAKE 2ND CALL Once the call waiting call has been answered and there is one call on hold Initiate a second call by selecting Options and Make 2nd call merge both calls to setup 3 Way cat by selecting Merge calls in the Options menu Once the dial tone is heard begin dialling the number or select the person to call by The cal
18. l will to continue with the remaining caller if one of the callers hangs up selecting Contacts and then press Call Press the End soft key to end the second call and be reconnected to the first call In call options Contacts Make 2nd cal transer cal Volume 52 Speaker on 02 3456 890 Options 3 Way Call Make 2nd Call Screens Note A merged call cannot be transferred PAGING Paging is initiated by pressing and releasing the top button on the Base Station Page button or DECT button on the T Gateway All devices registered to the Base Station or I Gateway and in range will begin to ring Paging is offered for 1 minute At the end of that time all handsets and tablet will stop ringing The paging call is presented as an internal call amp can be stopped by following actions If the End option is selected or End Call is pressed on any handset the paging notification is removed from all handsets Can also be stopped by pressing and releasing the Page button on the base station or DECT button on the I Gateway again Pressing the Talk button during Paging call acts in the same manner as pressing the End Call button Ends the paging call Paging calls are not presented on handsets which are in use If the ringer is switched off on a handset this is temporarily disabled for paging so that the handset can be found 24 25 CALL LOG The Call Log lists All Calls Missed calls Incoming calls answered Outgoing calls to a ma
19. ld down the Page button top button on the front of the Base Station or DECT button on the T Gateway for 5 seconds It should start flashing blue Press OK or confirm dependent on the handset to start the registration process Note For non T Hub handsets to connect to the T Hub 2 Base Station it must be GAP compliant Majority of the major brands are GAP compliant SETTINGS How do I turn off the Handset screen at night From the Handset select Settings gt Display gt Night mode and select whether the Screen is to be turned off or whether the screen and LED is to be turned off Note the screen will only be turned off between 9pm and 6am What does it mean if the Handset LED is flashing blue This means that there is a missed call or voice message What does the white dot on the Call Log icon mean There is a missed call What does the white dot on the Voicemail icon mean There is a new voice message 4 CUSTOMER SERVICE AND PRODUCT WARRANTY IMPORTANT Please retain this booklet with your sales receipt as proof of the date of purchase Customer Service If you require assistance in operating this product please call Telstra T Hub Support on 1300 136 841 Voluntary Product Warranty In addition to your Statutory Rights and subject to the conditions in the next paragraph lelstra also warrants that this product will be free from any defect in materials or workmanship under conditions of normal use for a period
20. ng and other call features 15 45 15 45 Call Waiting turns Call Waiting on or off Call features Call waiting Forward m number Forward t number Cal RUE qu i t L EU i TE PET Le ihar TE PET ihar 2 i tonwvardnumber 1 torwardnurmber Call forward Auto pickup z Sp io prc mS Ure iL prc mS Lan rue Auto hangup Immediate Off Set Immediate On Call Immediate On e Busy forwards all calls to a nominated number if the line is busy Cancel Call Waiting Settings Call Forward turns Call Forward on or off Under this feature select from Fionward MEI TAI 7j 24 forwardnumber 2 1 Farwardlumber Call forward Options MIT Options Mute ume Immediate Off Set Immediate On Call Immediate On lusy No answer No answer forwards all calls to a nominated number if the call is not answered Off Fwd No answer off Call Forward Settings Forward ID number 61 forwardnumber B1 ForwardNumber OK ance Options Delete Coton Mute No Answer Off Set No Answer On No Answer On 40 41 e Off turns off all Call Forward settings Upon activating or deactivating a call forward feature a confirmation tone and a recorded voice response acknowledging the status will be heard Auto Pickup will automatically connect the call when you pick the handset out of the dock This is set to On by default When it is Off select Answer when the handset is picked out of the dock Auto pickup
21. set battery is charging the battery icon will show animated bars filling up the battery level If the battery icon appears to suggest that your handset is charging but when you remove it from the dock after 30 minutes and the handset turns off it may suggest that your batteries are not working and need to be replaced Replacing the Batteries The T Hub 2 batteries will last for 24 months If the handset batteries don t appear to be staying charged for as long as it used to you can replace them with another set as long as they have similar specification i e 1 5V AAA Ni MH batteries 600mAh or greater HOME SCREEN amp EVENT NOTIFICATIONS The Home screen is composed of 3 parts e lop bar named Title Details the time amp battery ringer status telephone connectivity and alarm symbols e Below the Title bar Displays the name of the handset e Bottom Bar Redial soft key to access the Outgoing call list and Speaker soft key to go off hook in speaker mode Title 15 45 Handset name Pho one 2 7 Missed call indicator Contacts Ss tj H Call lo New voicemail GB indicator 2 Voicemail OO Settings Softkeys Redial CALLING TAKING A CALL When the handset receives an incoming call the caller s information is displayed John Ford Sience Incoming Call If there is a match between the incoming number and a contact in the T Hub 2 Contacts the first name and last name will be displayed If there is no
22. ted from the 6 available wallpapers with blue being the default Voicemail alert Voicemail Alert Handset tones Turn the Keypad Low Battery and Out of Range handset tones to off or on Wallpaper Options All tones are set as On by default Out of range Note The wallpaper will only change for the Home screen all other screens will use the i default blue wallpaper Handset Tones 34 35 Brightness Modify the brightness of the display by selecting Settings from the Home Screen followed by Display and then Brightness Modify the brightness to one of five levels Display Brightness Wa paper Brighiness Night mode LED indicator Handset Brightness Night Mode The following options are available when setting Night Mode e Off turns Night Mode off This is the default setting e Dim screen turns the handset screen off between 9pm to 6am Note The time that the screen dims cannot be adjusted e Dim screen amp LED turns the handset screen and LED off from 9pm to 6am Night mode Cancel Night Mode 36 LED Indicator Turn the LED indicator off or on By default the LED in turned on LED indicator Lance LED Settings 37 TIME Set an alarm time and change the format in which the time is presented from 12 hour to 24 hour If the handset is registered to a T Gateway the time on the handset will be automatically synchronised with the T Gateway which receives the time from the int
23. tically connected to the external call OUTGOING CALL Making a Call Start dialling the numbers and press the Talk key HB make a call The calling screen will be displayed and the call timer will start From this screen the Options available include e Record number in Contacts e Set number as a Speed dial number Number options 02 3456 890 M eL Options Delete Rejecting a Call Number Options Screen Dialling from Contacts Search for a contact by selecting the Contacts icon from the handset and begin typing the contacts name using the keypad Alternatively scroll down the list of contacts Once acontact is selected the default number appears below the name Use the left and right to change the number if more than one number recorded Press the Talk key to make a call Options Back Dial Contacts Dialling from the Call Log When an entry within the Call Log is selected pressing the Talk key B dial the number A press on the Power key ii will take you back to the handset home screen Number options LI Wt a a ae a Buy DO BACCI ro mE Ln M ey LJ E Ip gt Speed Gia Cancel Pre Dialling Screen Number Options Screen INTERNAL CALL Press the INT key to make an internal call to another handset or tablet registered to the base station or I Gateway If there are 3 or more registered or tablets their details will be displayed Otherwise the handset will call the other register
24. ximum of 150 entries A small dot will appear on the Call Log icon to indicate a missed call Once all the missed call details have been viewed in the Call Log the indicator will disappear To move from one list to another use the Left or Right keys on the handset To call a number from the Call Log list highlight the name number using the Up Down scroll keys and press the Talk key ki Save a number in the call log by scrolling to the number selecting Options and select New contact CONTACTS Add delete and view contacts by selecting the Contacts icon using the scroll keys and the OK button on the handset View up to 1000 contacts that are shared between the I Hub 2 handset and other tablets registered to the same base station or I Gateway Note contacts will not be shared between non T Hub 2 devices registered to the base station or Gateway Note Contacts will not be shared between non T Hub 2 devices registered to the base station or Gateway 26 Contacts Fields The contacts fields on the handset are made up of the following First name 20 characters e Last name 20 characters e Home number 25 digits Mobile number 25 digits e Work number 25 digits e Ringtone to assign a dedicated ringtone to a contact Default number to select the number to be used by default in case of more than 1 number in a contact Firstname 28 ast name ft Home Mobile Nork Default Cancel Contact Fiel
Download Pdf Manuals
Related Search