Home

TX-24AS500E TX-32AS500E TX-39AS500E TX

1. Note e There might be some CI modules in the market with older firmware versions that do not work fully interoperable with this new Cl v1 3 TV In this case please contact your content provider Using Common Interface The Common Interface Module menu provides access to software contained in Common Interface Cl Modules e This function may not be available in some countries or regions e Video and audio signals may not be output depending on broadcasts or services Although Cl module may enable you to view some services this TV does not guarantee all services e g encrypted pay TV channels Please use only the broadcaster approved Cl module Consult the operator broadcaster or Cl module manufacturer for more information and conditions of the services 143 E Insert the CI module optional e Normally encrypted channels will appear The viewable channels and its features depend on the Cl module If encrypted channels do not appear take the following steps For more details read the manual of the Cl module or check with the content provider 1 Display TV Selection with gi 2 Select the mode with W and press s to set DVB C DVB T 3 Display the menu with MSNU 4 Select Setup gt Common Interface with 4 W and press to access 5 Select Slot 1 with Av W press and follow the on screen instructions e On screen instructions may not correspond to the remote control buttons 144
2. Photos are displayed as old films Sepia tone Colour Effect Off Sepia Gray scale Selects the colour effect of photos e Not valid when Frame is set to Drift Gallery or Cinema 80 Transition Effect Off Fade Dissolve Motion Random Selects the transition effect for switching photos during the slideshow Fade The next photo fades in gradually Dissolve Each photo is dissolved when switching to the next photo Motion Each photo is displayed with an effect of enlarging reducing moving up or moving down Random The transition effect is selected at random e This function is available when Frame is set to Off Auto Makeup On Off Automatically detects the face in the photo and improves luminance and contrast screen Mode Normal Zoom Selects enlarged or normal viewing e Not valid when Frame is set to Collage Drift Gallery Cinema or when Transition Effect is set to Motion e Depending on the photo size the photo may not be fully enlarged to fill the screen e g portrait style picture Burst Playback On Off Selects whether to display burst photos in a fast paced slideshow mode or not e Not valid when Frame is set to Drift Gallery Cinema or when Transition Effect is set to Motion 81 Interval Long Normal Short Selects slideshow interval e Not valid when Frame is set to Drift Gallery Cinema or when Transition Effect is set to Motion Repeat On
3. CU Network gt Network connections E33 Network gt Network settings VIERA Name sets your favourite name for this TV e This name will be used as the name of this TV on the screen of the other network equipment e When you use two or more TVs in your network environment set the names of the TVs for each TV Remote App Settings Sets to control the TV with the equipment smartphone etc connected to your network 1 Display the menu with WSNS 2 Select Network gt TV Remote App Settings with A Y and press ef to access 3 Select one of the following items with Y and press JK to access TV Remote On Off Enables to control the TV from the network equipment smartphone etc Device to upload contents Selects device to upload contents from the network equipment Smartphone etc Note e This function is not available when the TV is turned off e You need to install the application for controlling VIERA on your smartphone For information of the application http panasonic net viera support English only For the operations refer to the support information of the application e Depending on the network condition this function may not be available e Depending on the area this function may not be available For details consult your local Panasonic dealer 112 Network Link Settings Sets to control the TV with devices connected to the network 1 Display the menu with WS
4. Panasonic TX 24AS500E TX 32AS500E TX 39AS500E TX 42AS500E TX 50AS500E eneELP B English my Home Screen my Home Screen e Information e How to use e Settings e OSD Colour APPS List e Information e How to use e Settings Watching Basic e Basic connection e Selecting channel e Information banner e Option Menu e Subtitle e Last view e Off Timer e Energy saving functions e Adjusting time e Language External equipment e External connection e Watching external input e Operating with TV s remote control e HDMI features e Terminal information e Valid input signals For best picture e Viewing Mode e Ambient Sensor 10 11 12 13 16 19 20 23 25 25 26 Zi 29 29 30 33 34 36 38 39 40 41 e Aspect e Aspect Control Signal e Basic settings e Noise reduction settings e Advanced Settings e Option Settings e Screen Settings e Copy Adjustment For best audio e Sound mode e Basic settings e Volume settings e Voice Guidance Settings e Audio Description e Advanced settings TV Guide e Using TV Guide Teletext e Viewing Teletext e Teletext mode e Teletext Character Set Tuning and editing channels e Setting menu e Favourites Edit e Channel List e Auto Setup e Manual Tuning e Update Channel List e New Channel Message e Signal Condition e Other settings 42 43 45 46 46 48 50 51 52 53 54 55 56 57 59 63 65 66 67 67 69 70
5. Shipping Condition Shipping Condition Resets the TV to its original condition i e no channels tuned in All settings are reset channels picture sound settings etc 1 Display the menu with WISN 2 Select Setup gt System Menu gt Shipping Condition with A W and press to access e Child Lock PIN number is required depending on the country If you have forgotten your changed PIN input 6969 as the PIN number ON Functions gt Child Lock gt PIN number 3 When the confirmation screen is displayed select Yes with lt gt and press JX to set 4 Follow the on screen instructions e Auto Setup will automatically start e To retune TV channels only e g after moving house set Auto Setup CO Watching gt Tuning and editing channels gt Auto Setup 145 Updating the TV Software Information A new version of software may be released for download to enhance the performance or operations of the TV If there is an update available and the channel has the update information a notification message is displayed e To install new software select Standby Now with lt gt and press JK to set Standby Installs new software in standby condition Now Installs new software now Auto update You can update new software automatically 1 Display the menu with WSNS 2 Select Setup gt System Menu gt System Update gt Auto Update Search in Standby with A Y and press
6. TV Guide Electronic Programme Guide EPG is available Channel List The channel list will appear instead of EPG 59 Example T a a m sae iame a aee oa e e n AXKAX KARNA AKKA KAAK NANEN ENAN 11 00 11 30 12 00 12 30 1 00 1 XXXX Das Erste DIY 505 The Bil Red Cap Sports 7 XXNX Hot Wars Holiday Program Live junction EEST E Emmerdal Coronation Street thes Drama 70 XXXX 10 O clock News PepsiChar Goodbye NEWS 72 XNXX Panorama me watch Coast B5 XXXX Fea ESE Co Live 1 TV screen Date Time 4 Programme 5 D DVB T A Analogue Channel position and name To watch the programme 1 Select the current programme with A V lt The current programme is displayed on the top left of the screen 2 Press JK to watch To the previous day DVB Ge red To the next day DVB green To view a channel list of the selected type 1 Display the type list with J yellow 2 Select the type with W and press N to view To search programme titles and view a list of the searched programmes DVB if available 1 Display the search list with yellow 2 Select Search with Y and press JX to access 3 Enter characters with A V lt gt and press X to set You can set characters using NUNE JTA N Functions gt Setting characters gt Using Numeric buttons
7. Watching gt External equipment gt External connection e Turn the TV and equipment off then turn them on again e Check an input signal from the equipment ON Watching gt External equipment gt Valid input signals e Use equipment compliant with EIA CEA 861 861D Network Before requesting service or assistance please follow these simple guides to solve the problem If the problem still persists please contact your local Panasonic dealer for assistance Cannot connect to the network e Check the LAN cable or wireless LAN is connected properly CO Network gt Network connections e Check the connections and settings C Network gt Network connections E Network gt Network settings e Check the network equipment and network environment The router may not be set to issue IP address automatically If the network administrator prefers to allocate an IP address set an IP address manually EJ Network gt Network settings The router may be using MAC address filtering Security setting Confirm the MAC Address of this TV and set the router to use tt LE Network gt Network settings gt Network Status If the problem persists consult your Internet Service Provider or telecommunications company 175 Cannot select the file during DLNA operations e Is media server of the connected equipment prepared CE Network gt DLNA gt Information e Check applicable data format us Network gt Technical
8. e Audio settings can be made on HDMI Input in the Sound Menu CON Watching gt For best audio gt Advanced settings If the connected equipment has an aspect adjustment function set the aspect ratio to 16 9 These HDMI connectors are type A These HDMI connectors are compatible with HDCP High Bandwidth Digital Content Protection copyright protection Equipment having no digital output terminal may be connected to the input terminal of component or video to receive analogue signals e This TV incorporates HDMI technology B yan Terminal information E AV1 SCART terminal RGB VIDEO 20 18 16 14 12 10 8 6 A 2 1 Audio out R 12 2 Audio in R 13 Red earth 3 Audio out L 14 Earth 4 Audio earth 15 Red in 5 Blue earth 16 Status RGB 6 Audio in L 17 CVBS earth 7 Blue in 18 RGB status earth 8 Status CVBS 19 CVBS out video 9 Green earth 20 CVBS in video 10 21 Socket Earth 11 Green in 2306 E HDMI terminal 1 TMDS Data2 11 TMDS Clock Shield 2 TMDS Data2 Shield 12 TMDS Clock 3 TMDS Data2 13 CEC 4 TMDS Data1 14 Utility 5 TMDS Data Shield 15 SCL 6 TMDS Data1 16 SDA 7 TMDS Data0 17 DDC CEC Ground 8 TMDS DataO Shield 18 5V Power 9 TMDS Data0 19 Hot Plug Detect 10 TMDS Clock Valid input signals E COMPONENT HDMI 525 480 60i 60p ee ee 625 576 50i 50p ee 750 720 60p 50p 1 125
9. hide information of the highlighted file E3 Note e Non playable files are also listed but cannot be selected Viewing photo E Playback e To operate Single view lt To the previous photo gt To the next photo Stop return to list Slideshow e To display hide the operation guide E3 e To rotate 90 blue 115 e To return to list BACK RETURN Using Slideshow Slideshow ends when all photos within the list are viewed 1 Select the file from the thumbnail of photos for the first view with M q D 2 Start Slideshow with HM red and OK e To display hide the operation guide e To pause return to Single view e To return to list BACK RETURN E Slideshow Settings Set up the settings for photo file operations on this TV 1 2 3 Display the option menu with 30X Select Slideshow Settings with A W and press N to access Select one of the following items with 4 W and press N to access Transition Effect Auto Makeup Interval Repeat Back Ground Music Set with A W lt 1 gt and press fX to store Transition Effect Off Fade Dissolve Motion Random Selects the transition effect for switching photos during the slideshow Fade The next photo fades in gradually Dissolve Each photo is dissolved when switching to the next photo Motion Each photo is displayed with an effect of enlarging reducing moving up or
10. 1 080 60i 50i 1125 1080 60p 50p 249 e o Applicable input signal Note e Signals other than above may not be displayed properly e The above signals are reformatted for optimal viewing on your display 39 For best picture Viewing Mode 1 Display the menu with MSNU 2 Select Picture gt Viewing Mode with A W and press to access 3 Select the mode with and press s to set Viewing Mode Dynamic Normal Cinema True Cinema Custom Selects your favourite picture mode for each input Dynamic Improves contrast and sharpness for viewing in a bright room Normal Normal use for viewing in a normal lighting condition Cinema Improves the performance of contrast black and colour reproduction for watching movies in a darkened room True Cinema Reproduces the original image quality precisely without any revision Custom Adjusts each menu item manually to suit your favourite picture quality In each Viewing Mode Backlight Contrast Brightness Colour Tint Sharpness Colour Temperature Vivid Colour Adaptive Backlight Control Ambient Sensor Noise Reduction and MPEG Noise Reduction can be adjusted and stored When in Cinema True Cinema or Custom Advanced Settings can be adjusted additionally The settings in True Cinema or Custom can be stored for each input 40 Ambient Sensor 1 Display the menu with MEWY 2 Select Picture gt Ambient Sensor with 4 V a
11. 124 125 Technical information e Photo format e Video format e Music format Functions VIERA Link HDAVI Control e Summary of VIERA Link e Preparations e Easy playback e Power on Link e Power off Link e Standby Power Save e Intelligent Auto Standby e VIERA Link Control e Speaker Selection e Note Child Lock e Using Child Lock PIN number e Parental Rating Data Service Application e Using Data Service Application e Cookie e Note Common Interface e Caution e Using Common Interface Shipping Condition e Shipping Condition Updating the TV Software e Information e Auto update 126 126 129 130 134 134 135 135 135 135 136 137 138 139 140 140 141 141 142 143 143 145 146 146 e Manual update setting characters e Using Numeric buttons Keyboard e Keyboard Settings setting menu e How to use Picture e Viewing Mode e Basic settings e Ambient Sensor e Noise reduction settings e Advanced Settings e Option Settings e Screen Settings e Copy Adjustment e Reset to Defaults Sound e Mode e Basic settings e Volume settings e Voice Guidance Settings e Audio Description e Advanced settings e Reset to Defaults Network e Network Connection e Network Status e my Home Cloud Settings e VIERA Name e TV Remote App Settings 147 148 149 150 152 152 152 153 153 153 155 155 155 156 156 157 158 159 160 160
12. 161 161 161 161 161 e Network Link Settings e File Sharing Settings e Other settings Timer e Off Timer e Time Zone e Auto Standby e No signal Power off Setup e Eco Navigation e USB Device Setup e Child Lock e Tuning Menu e Language e Display Settings e Common Interface e VIERA Link Settings e Data Service Application e System Menu e Other Settings Support FAQs e Picture e Digital TV e Analogue TV e Sound e HDMI e Network e Other Maintenance e Care and Cleaning 161 161 162 163 163 163 163 164 164 164 164 166 166 168 168 169 169 170 171 172 173 174 174 175 176 178 Information e Using Help menu Optional accessories e Communication Camera e Wall hanging bracket Licence e Licence Letters enclosed in a box indicate remote control buttons Menu Letters in cyan indicate on screen display items References in this eHELP e The images shown in this eHELP are for illustrative purposes only 179 180 180 181 my Home Screen my Home Screen Information my Home Screen is a gateway to the TV applications and more It provides easy access to special features such as Media Player videos games communication tools etc as shown below example Home Screen selected content screen TV application etc Home Screen Selection Your preferred Home Screen can be selected or added 10 How to use Home Screen provides a
13. CU Network gt DLNA gt Information U3 Network gt Network connections U3 Network gt Network settings 1 Display APPS List with NSS 2 Select Media Server with W lt gt and press to access 3 Select one of the media servers with and press to access e For the operations to access another TV select the name of another TV from the displayed media server list e To display hide information of the highlighted media server Ea 4 Select the file with 4 W and press to access Example E m TEE Say SERVES ae e Depending on the condition of media server you may need to select the folder before selecting the file e To display hide information of the highlighted file E3 Note e Non playable files are also listed but cannot be selected e You can use the following buttons during playback Confirm the remote control code is 73 Lad Ced d d ed ad od N Watching gt External equipment gt Operating with TV s remote control 100 Network connections Internet connection To use internet service you need a broadband network environment e If you do not have any broadband network services please consult your retailer for assistance Dial up internet connections cannot be used Required speed effective at least 1 5 Mbps for SD Standard Definition and 6 Mbps for HD High Definition picture quality respectively If the transfer speed is not enough c
14. K SECAM D K F SECAML L Select the channel position with NURE Jilo ona noe pan o Select the channel with aeaaeae ewe DITA A ki 3 Search with lt 4 Select Store with V and press to set Use Fine Tuning to make small adjustments to the tuning of an individual programme affected by weather conditions etc If a VCR is connected only with the RF cable select channel position 0 Update Channel List By updating the DVB channel list you can add new channels delete removed channels or change channel names and positions automatically The channel list is updated while keeping your settings in Favourites Edit Channel List Child Lock etc Depending on the signal condition the update may not work properly New Channel Message Selects whether to give a notification message when a new DVB channel is found or not When a notification message appears you can perform Update Channel List pressing OK oe signal Condition selects a channel and checks the signal condition A good Signal Strength is not an indication of suitable signal for DVB reception e Use the Signal Quality indicator as follows Green bar Good Yellow bar Poor Red bar Bad Check the terrestrial aerial or cable e Vertical lines show the maximum signal value of the selected channel e To change the channel A Vv e For DVB Other settings Favourite Network selects your favourite networ
15. 60 4 Press J green to start searching All the programme titles including the word you set will be listed Searching without any characters will list all programmes including current programmes e To view a channel list of the selected category 1 Display the category list with ij blue 2 Select the category with 4 W and press to view To list favourite channels set Favourites Edit CON Watching gt Tuning and editing channels gt Favourites Edit e To view more details of the programme DVB 1 Select the programme with A 7 lt gt 2 Press J to view Press again to return to TV Guide e To exit TV Guide EXIT Note e When this TV is turned on for the first time or the TV is switched off for more than a week it may take some time before TV Guide is completely shown This function varies depending on the country you select The postcode entry or update may be required to use the GUIDE Plus system depending on the country you select 1 Display the menu with WINO 2 Select Setup gt Other Settings gt GUIDE Plus Settings with A WY and press lt to access 3 Follow the on screen instructions Update Performs the update of the GUIDE Plus schedule for the GUIDE Plus system only available in some countries Postcode Sets your postcode to receive local information in the GUIDE Plus system only available in some countries System Inform
16. 89 42 50 inches model On Off Reproduces the original image quality in detail for 1080p HDMI input signal 48 HDMI Content Type Graphics Photos Auto Off Adjusts the picture settings of each HDMI input according to the selected content type Auto Automatically adjusts the picture settings according to the received HDMI content if the connected equipment supports HDMI Content Type e To set the availability of each content type for Auto mode select Auto Detail Setting e For HDMI input HDMI RGB Range Auto Full Normal Adjusts the black level of the image for each HDMI input e When the black level is not suitable select Full e For HDMI input AV Colour System Auto PAL SECAM M NTSC NTSC Selects optional colour system based on video signals e For AV input 3D COMB On Off Makes still or slow moving pictures more vivid e Occasionally while viewing still or slow moving pictures colour patterning may be seen Set to On to display sharper and more accurate colours e For PAL NTSC signal reception in TV mode or from composite connection 49 ocreen Settings 1 Display the menu with MSNU 2 Select Picture gt Screen Settings with 4 4 and press N to access 3 Select one of the following items with W and press 6 to access 16 9 Overscan H Size Zoom Adjustments Screen Display 4 Set with W and press X to store 16 9 Overscan On Off Sele
17. Noise Reduction Auto Max Mid Min Off Reduces flicker noise in contoured parts of a picture and block noise N Watching gt For best picture gt Noise reduction settings e Not valid when 1080p Pixel Direct is set to On 39 42 50 inches model Advanced Settings You can adjust and set up the detailed picture settings TN Watching gt For best picture gt Advanced Settings This function is available when Viewing Mode is set to Cinema True Cinema or Custom Option Settings Film Cadence Mode On Off Improves vertical resolution for movie images LE Watching gt For best picture gt Option Settings e This function is available for interlaced signals except in Network services 1080p Pixel Direct 89 42 50 inches mode On Off Reproduces the original image quality in detail for 1080p HDMI input signal CON Watching gt For best picture gt Option Settings 153 HDMI Content Type Graphics Photos Auto Off Adjusts the picture settings of each HDMI input according to the selected content type U3 Watching gt For best picture gt Option Settings e For HDMI input HDMI RGB Range Auto Full Normal Adjusts the black level of the image for each HDMI input CON Watching gt For best picture gt Option Settings e When the black level is not suitable select Full e For HDMI input AV Colour System Auto PAL SECAM M NTSC NTSC Selects optional colour system based o
18. Off Slideshow repeat Back Ground Music Off Type1 Type2 Type3 Type4 Typed User Auto Selects the background music during Photo mode Type 5 Music files installed on this TV at the factory settings will be played back Auto Music files stored in the current device will be played back e If there is no available music data no sound will be played back User Music files in the device registered by yourself will be played back e If no music files have been registered or the device which had registered music files is removed no sound will be played back To register music 1 Select the music file with Y and press JK to access e Depending on the condition of the device select folders until you reach the desired music file 2 Select File Folder with 4 W and press to set File The selected music file will be registered Folder All the music files in the folder which contains the selected music file will be registered ye Note e Picture quality may be degraded depending on the slideshow settings e Picture setting may not work depending on the slideshow settings 83 Video mode Selecting file 1 Select the title in the thumbnail view with A V lt E EJ Error display E The file does not support thumbnail view e The preview will start when the title scene is highlighted in the thumbnail view if it supports a preview To turn off the preview set V
19. Select Sound gt Audio Description with 4 WY and press to access 3 Select one of the following items with WY and press to access Preferred Audio Type Volume Speakers Headphones 4 Set with A W lt gt and press X to store Preferred Audio Type Standard Audio Description Narration settings for visually impaired users Set to Audio Description to activate the narration sound track when available on the broadcast e The availability of audio description sound track is indicated by AD in the information banner e For DVB Volume Adjusts the volume for Audio Description e For DVB Speakers Mix Standard Set to Mix to activate the description sound track from TV speakers e For DVB Headphones Mix Standard Set to Mix to activate the description sound track from headphones e For DVB 56 Advanced settings 1 Display the menu with MSNU 2 Select Sound with 4 W and press X to access 3 Select one of the following items with W and press 6 to access MPX Audio Preference SPDIF Selection SPDIF Delay HDMI Input 4 Set with W and press X to store MPX Selects multiplex sound mode if available Stereo Use this normally Mono When stereo signal cannot be received M1 M2 Available while mono signal is transmitted e For Analogue Audio Preference Auto Multichannel Stereo MPEG e Selectable options vary depending on the country you
20. Store photos videos or music contents into the DLNA Certified media server for example PC with Windows 7 Windows 8 installed DIGA Recorder etc connected to your home network And then you can enjoy these contents on this TV Example e For watching and operating contents on this TV m Network gt DLNA gt Using DLNA e For supported file formats C Network gt Technical information To use aPC as a media server Prepare the PC with Windows 7 Windows 8 or ensure the server software is installed on the PC Windows 7 Windows 8 and Twonky 7 installed on the PC with Windows XP or Mac are the server software that has been tested for compatibility with this TV as of December 2013 Any other server software has not been tested with this TV therefore compatibility and performance cannot be assured e Windows 7 Windows 8 The setup for homegroup settings of Windows 7 Windows 8 is required For details refer to the help functions of Windows 7 Windows 8 97 e wonky Twonky is the product of PacketVideo Corporation To obtain the Installation Guides for installing and setting Twonky visit the website of TwonkyMedia Additional fees may be charged to obtain server software Note e For more information about the server software please consult each software company e When server software for the media server is installed on the PC the data on the PC may be at risk of
21. VIERA Link with A W lt 1 gt and press N to access 3 Select Speaker Selection with 4 W and press M to access 4 Select Home Cinema TV with A W and press N to set Home Cinema The sound is delivered from theatre speakers Player theatre Blu ray Disc theatre or Amplifier will be automatically turned on if it is in Standby mode e The sound of TV speakers is mute When the equipment is turned off TV speakers will be activated e You can use Welitiaat melowm Blow and VOAS TV speakers are active TV 137 E Multi channel sound If you want to enjoy the multi channel sound e g Dolby Digital 5 1ch via an Amplifier connect it with an HDMI cable and Optical digital audio cable and then select Home Cinema If your Amplifier has the HDAVI Control 5 function you only need to connect it with an HDMI cable to the TV s HDMI2 terminal To enjoy multi channel sound from DIGA Recorder connect an HDMI cable from the DIGA Recorder to the Amplifier Note e If you cannot operate the equipment check the settings and the equipment _ Functions gt VIERA Link HDAVI Control gt Summary of VIERA Link Note e These functions may not work properly depending on the connected equipment e Image or sound may not be delivered for the first few seconds when the input mode is switched e HDAVI Control 5 is the newest standard for HDAVI Control compatible equipment This stan
22. available during playback 86 Subtitle Display hide subtitles if available e This function is available during playback Subtitle Text selects the font type to display subtitles correctly if available e This function is available during playback Repeat On Off Playback repeat within the title or selected file depending on the content Audio output settings e To confirm or change the current sound status Media Player gt Video mode gt Video Setup 1 Display the menu with MSY 2 Select Sound gt SPDIF Selection with 4 W and press X to access 3 Select Auto PCM with A W and press to set SPDIF Selection Auto PCM Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 ARC function terminals e SPDIF is a standard audio transfer file format Auto Dolby Digital Plus Dolby Digital and HE AAC multi channel are output as Dolby Digital Bitstream MPEG is output as PCM DTS is output as DTS PCM Digital output signal is fixed to PCM e ARC Audio Return Channel is a function of digital audio output using HDMI cable 87 Music mode Selecting file 1 Select the folder in the thumbnail view with A 7 lt 2 Start playback with Hj red e For supported file formats O Media Player gt Technical information gt Music format E Thumbnail view e To display hide information of the highlighted content E3 e To start
23. being accessed by other people Please take care of the settings and connections under the network circumstances in office hotel or even at home when not using a router To use a DLNA compatible DIGA Recorder as a media server By connecting a DLNA compatible DIGA Recorder to your home network you can control it as one of the media servers e Please read the manual of your DIGA Recorder to check if the recorder is compatible with DLNA E Playback of sharing contents on this TV with the DMC Digital Media Controller network equipment You can enjoy contents stored in the media server by controlling with the DMC network equipment smartphone PC with Windows 7 Windows 8 installed etc connected to your home network e To use this function with your smartphone or Windows 7 Windows 8 set TV Remote App Settings of this TV CTN Network gt Network settings gt TV Remote App Settings And you need to install the application for controlling VIERA on your smartphone For information of the application http panasonic net viera support English only For the operations refer to the support information of the application e Windows 7 Windows 8 are the OS that have been tested for compatibility of this TV as of December 2013 For the operations refer to the help functions of Windows 7 Windows 8 98 E Sharing the contents of this TV with another piece of network equipment You can enjoy the contents of t
24. data service application leaves into the TV in order to recognise to use it again Delete Cookie Deletes all of technical information left by a data service application 141 Note To use Hybrid Broadcast Broadband TV application fully you need a broadband network environment Ensure the network connections and network settings are completed C Network gt Network connections CI Network gt Network settings Not all the data services are available depending on the country area and broadcaster Depending on the connection environment the internet connection may be slow or may not be successful Operations may vary depending on the broadcaster Follow the on screen instructions On screen instructions may not correspond to the remote control buttons 142 Common Interface Caution If the encrypted message is displayed on the screen the correct Common Interface Cl Module and smart card that are required for this service are not inserted E How to insert Cl module and smart card e Turn the TV off with Mains Power On Off switch whenever inserting or removing the Cl module e Ifa smart card and a CI module come as a set first insert the Cl module then insert the smart card into the CI module e Insert or remove the Cl module completely in the correct direction as shown e Remove the Cl module from the TV when placing the TV facing upward This may cause damages to the Cl module and Cl slot
25. device to a high pressure or impact Insert the device in the correct direction Otherwise this can damage the device or TV Electrical interference static electricity or erroneous operation may damage the data or device Back up the recorded data at regular intervals to prevent data deterioration data damage or erratic operation of the TV Panasonic is not liable for any deterioration or damage of recorded data USB devices It is recommended to connect the device to the TV s USB port directly e Some USB devices or USB HUB may not be used with this TV You cannot connect any devices using a USB card reader e Additional information for the devices may be found on the following website http panasonic net viera support English only E USB Flash Memory USB Flash Memory format FAT16 FAT32 or exFAT e USB HDDs formatted on a PC are not guaranteed to work in Media Player 90 Photo format E Supported Photo formats JPEG jpg jpeg Sub sampling 4 4 4 4 2 2 4 2 0 Image resolution pixel 8 x 8 to 30 719 x 17 279 e DCF and EXIF standards e Progressive JPEG is not supported Note e Some files may not be played back even if they fulfil these conditions e Do not use multi byte characters or other special codes for file names e Connected devices may become unusable with this TV if the file or folder names are changed 91 Video format E Supported Video formats AVI avi Vide
26. equipment gt Operating with TV s remote control e To display the operation guide OPTION If other manufacturers product is accessed Setup Contents Selection menu may be displayed e Available TV s remote control buttons depend on the connected equipment E f multiple recorders or players are connected Each recorder player is numbered The number is given from the TV s lower number of HDMI terminal connected to the same type of equipment For example when two recorders are connected to HDMI1 and HDMIZ2 the recorder connected to HDMI1 is displayed as Recorder and the recorder connected to HDMIZ2 is displayed as Recorderz2 E f you access non VIERA Link equipment The type of the connected equipment is displayed Although you can access the connected equipment you cannot operate it Use the remote control of the connected equipment 136 Note e f you cannot operate the equipment check the settings and the equipment O Functions gt VIERA Link HDAVI Control gt Summary of VIERA Link e Some operations may not be available depending on the equipment In this case use the remote control of the connected equipment e For details of the operations for the connected equipment read the manual of the equipment speaker Selection You can control the theatre speaker with this TV s remote control by pointing at the TV s signal receiver 1 Display APPS List with NSS 2 Select
27. has HDAVI Control 4 or later function 3 While playing a disc 4 Except for watching a disc 133 E VIERA Link Control of compatible equipment The following is the maximum number of compatible equipment that can be controlled by VIERA Link Control This includes connections to equipment already connected to the TV For example DIGA Recorder connected to Amplifier which is connected to the TV via an HDMI cable OON Functions gt VIERA Link HDAVI Control gt VIERA Link Control e Recorder Maximum 3 DIGA Recorder etc e Player Maximum 3 DVD Player Blu ray Disc Player HD Video Camera LUMIX Camera Digital Camera Player theatre Blu ray Disc theatre etc e Audio system Maximum 1 Player theatre Blu ray Disc theatre Amplifier etc e Tuner Maximum 4 Set top box etc Preparations e Connect the equipment supporting VIERA Link e For VIERA Link connections _ Functions gt VIERA Link HDAVI Control gt Summary of VIERA Link e Use a fully wired HDMI compliant cable e Use a fully wired SCART cable e Set up the connected equipment Read the manual of the equipment set VIERA Link to On in the Setup Menu Set up the TV After connection turn the equipment on and then switch the TV on Select the HDMI input from Input Selection with XY and make sure that an image is displayed correctly This setup should be done each time the following conditions occur First time o
28. high definition multimedia interface is the world s first complete digital consumer AV interface complying with a non compression standard HDMI allows you to enjoy high definition digital images and high quality sound by connecting the TV and the equipment HDMI compatible equipment with an HDMI or DVI output terminal such as a DVD player a set top box or game equipment can be connected to the HDMI terminal using a fully wired HDMI compliant cable LE Watching gt External equipment gt External connection The HDMI logo is displayed on HDMI compliant equipment E Applicable HDMI features e Input audio signal 2ch Linear PCM sampling frequencies 48 kHz 44 1 KHz 32 kHz e Input video signal Matches the output setting of the digital equipment N Watching gt External equipment gt Valid input signals VIERA Link HDAVI Control 5 OON Functions gt VIERA Link HDAVI Control gt Summary of VIERA Link e Content Type e Audio Return Channel Audio Return Channel ARC is a function to send digital sound signals via an HDMI cable For HDMI2 terminal 36 E DVI connection If the external equipment has only a DVI output connect to the HDMI terminal via a DVI to HDMI adaptor cable When using the DVI to HDMI adaptor cable connect the audio cable to the audio input terminal use AV2 audio terminals e Enquire HDMI adaptor cable at your local digital equipment retailer shop Note
29. press N to access 3 Select one of the following items with 4 WY and press X to access Video Preview Multi Audio Dual Audio Dual Mono Audio Subtitle Subtitle Text Subtitle Language Repeat e Menu items and selectable options vary depending on the content 4 Set with A W lt gt and press K to store Video Preview On Off Sets to start the preview of the title or scene in the thumbnail view e Images may not be displayed for an instant in the thumbnail view Set the preview Off to solve this Multi Audio Dual Audio Dual Mono Audio Selects for selectable sound tracks if available e t may take several seconds to change the sound e This function is available during playback Subtitle Display hide subtitles if available e This function is available during playback Subtitle Text Selects the font type to display subtitles correctly if available e This function is available during playback Subtitle Language Selects the language for subtitles if available e This function is available during playback Repeat On Off Playback repeat within the selected file 120 Audio output settings You can enjoy the multi channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 ARC function terminal e To confirm or change the current sound status CE Network gt Videos gt Video Setup 1 Display the menu with MSNU 2 Select Sound gt SPDIF Selection
30. provided by HDMI which is an industry standard known as HDMI CEC Consumer Electronics Control As such its operation with other manufacturers product that supports HDMI CEC cannot be guaranteed e VIERA Link features may be available even with other manufacturers equipment supporting HDMI CEC Please refer to individual manuals for other manufacturers product supporting VIERA Link function About applicable Panasonic product consult your local Panasonic dealer 130 E VIERA Link HDMI connection e Use a fully wired HDMI compliant cable e Connect the equipment supporting VIERA Link to the TV s HDMI terminal via an HDMI cable About HDMI cable for connecting Panasonic HD Video Camera or LUMIX Camera read the manual of the equipment m lj 1 HDMI terminal HDMI cable Equipment with VIERA Link function DIGA Recorder DVD Player Blu ray Disc Player HD Video Camera LUMIX Camera E Available features HDMI connection DIGA Recorder DVD Player Blu ray Disc Player e Easy playback e Power on Link e Power off Link e Standby Power Save e Intelligent Auto Standby e VIERA Link Control HD Video Camera LUMIX Camera e Easy playback e Power on Link e Power off Link e VIERA Link Control 1 For equipment which has HDAVI Control 2 or later function 2 For equipment which has HDAVI Control 4 or later function 131 E VIERA Link HDMI and Audio ou
31. respective copyright notice thereof Contact Information cdrequest unipf jp The source code and the copyright notice are also available for free in our website below http www unipf jp dl EUIDTV14 183 Ver 1 04
32. service and calls up a favourite page Press SMEJ to return to TV mode Last view Switch to a previously viewed channel or input mode easily with PSJB 31 e Press again to return to the current view Note e Switching channel may not be available depending on the condition e Watching less than 10 seconds is not reflected in the previously viewed channel or input mode 95 Off Timer Turn the TV Standby mode automatically after a fixed period with OFF TIMER Press repeatedly until desired time appears 0 15 30 45 60 75 90 minutes To cancel set to 0 or turn the TV off The remaining time displays on the information banner LON Watching gt Basic gt Information banner When the remaining time is less than 3 minutes the remaining time will flash on the screen You can also set the time from Off Timer in the Timer Menu 1 Display the menu with WINO 2 Select Timer gt Off Timer with V and press N to access 3 Select the time in 15 minute increments with 4 W and press to set 90 75 60 45 30 15 Off minutes To cancel set to Off or turn the TV off 26 Energy saving functions The TV can be eco friendly using energy saving functions The TV will automatically go into Standby mode in the following conditions e Eco Navigation is set to Set to Eco e Off Timer is active EM Watching gt Basic gt Off Timer e No operation is performed for 4 hours while Auto Standby is se
33. signals s Note e Display the image TV external input etc full screen to use this function completely e Aspect mode can be memorised separately for SD Standard definition and HD High definition signals e Aspect cannot be changed in teletext service Aspect Control Signal Programmes usually contain an Aspect Control Signal Widescreen signal Control signal through SCART HDMI terminal In Auto mode aspect mode will appear in the top left of the screen if a Widescreen signal WSS or a Control signal through SCART pin8 HDMI terminal is found The aspect will switch to the appropriate ratio 23 Watching gt For best picture gt Aspect E Available conditions Terrestrial cable terminal WSS only Valid input signal format DVB C DVB T PAL B G H I D K SECAM B G L L D K Invalid input signal format PAL 525 60 6 5 MHz PAL 525 60 6 0 MHz PAL 525 60 5 5 MHz M NTSC 6 5 MHz M NTSC 6 0 MHz M NTSC 5 5 MHz 43 AV1 SCART AV2 VIDEO terminals Valid input signal format PAL SECAM PAL 525 60 M NTSC NTSC Control signal through SCART pin 8 HDMI terminal only AV2 COMPONENT terminals WSS only Valid input signal format 625 576 50i 50p Invalid input signal format 525 480 60i 60p 750 720 60p 50p 1 125 1 080 60i 50i HDMI terminal Valid input signal format 525 480 60i 60p 625 576 50i 50p 750 720 60p 50p 1 1
34. such as videos games communication tools etc from APPS List Example e To enable this function you need a broadband network environment Ensure the network connections and network settings are completed O Network gt Network connections CE Network gt Network settings Selecting internet content 1 Display APPS List with Nass e For details of APPS List EM my Home Screen gt APPS List e Depending on the usage conditions it may take a while to read all the data 2 Select the desired item with A Y lt gt and press K to access Example e To return to APPS List e To exit APPS List EXIT 95 e You can connect a keyboard and a gamepad for character input and playing games in the applications You can also use the keyboard or gamepad for TV operation as well as for APPS List CUN Functions gt Keyboard e Video communication for example Skype requires an exclusive Communication Camera TY CC20W For details read the manual of the Communication Camera LE Support gt Optional accessories gt Communication Camera Note e If you cannot access the internet contents check the network connections and settings E33 Network gt Network connections LE Network gt Network settings APPS List is subject to change without notice Not all the features of the websites are available Be sure to update the software when a software update notice is displayed on the TV s
35. time point with 6 To display hide the operation guide and information banner E3 e To the previous title scene Ge red To the next title scene 9 green 85 e To change aspect 1 Display Aspect Selection with MSAA 2 Select the mode with and press to set Aspectt Displays the content enlarged without distortion Aspect2 Displays the content full screen Original Displays the content original size You can also change the mode pressing X Press repeatedly until you reach the desired mode Aspect cannot be changed depending on the content e To return to thumbnail BACK RETURN Video Setup Set up the settings for Video mode 1 Display the option menu with SAKON 2 Select Video Setup with OM 3 Select one of the following items with 4 W and press N to access Video Preview Multi Audio Dual Mono Audio Subtitle Subtitle Text Repeat e Menu items and selectable options vary depending on the content 4 Set with A W lt gt and press X to store Video Preview On Off Sets to start the preview of the title or scene in the thumbnail view e Images may not be displayed for an instant in the thumbnail view Set the preview Off to solve this e This function is available in the thumbnail view Multi Audio Dual Mono Audio Selects for selectable sound tracks if available e It may take several seconds to change the sound e This function is
36. 11 72 72 13 13 Media Player Using Media Player e Information e Selecting device mode e Network device Photo mode e Selecting file e Viewing photo e Sorting photos e Using Slideshow Video mode e Selecting file e Watching video e Video Setup e Audio output settings Music mode e Selecting file e Playing music e Music Setup Technical information e Device handling caution e USB devices e Photo format e Video format e Music format Network Internet content e Information e Selecting internet content e Note DLNA e Information 74 5 Tf 78 78 19 19 84 85 86 8 88 88 89 90 90 91 92 94 95 95 96 97 e Using DLNA Network connections e Internet connection DLNA connection e Note Network settings e Network Connection e Custom Wireless e Custom Wired e Custom Wireless Access Point e Network Status e my Home Cloud Settings e VIERA Name e TV Remote App Settings e Network Link Settings e File Sharing Settings e Software Update e New Software Message Photos e Selecting file e Viewing photo e Using Slideshow Videos e Selecting file e Watching video e Video Setup e Audio output settings Music e Selecting file e Playing music e Music Setup DIGA Recorder e Controlling DIGA Recorder 100 101 102 104 105 106 109 110 111 111 112 112 113 114 114 114 115 115 116 118 118 120 121 122 123
37. 25 1 080 60i 50i 1 125 1 080 60p 50p 24p e HDMI terminal does not receive WSS signal Note e If the screen size looks unusual when a widescreen recorded programme is played back on a VCR adjust the tracking of the VCR Read the manual of the VCR 44 Basic settings 1 Display the menu with MEWY 2 Select Picture with A W and press to access 3 Select one of the following items with WY and press to access Backlight Contrast Brightness Colour Tint Sharpness Colour Temperature Vivid Colour Adaptive Backlight Control 4 Set with A W lt 1 gt and press X to store Backlight Contrast Brightness Colour Tint Sharpness Adjusts the levels of these options according to your personal preference Colour Temperature Cool2 Cool1 Normal Warm1 Warm2 Sets the overall colour tone of the picture bluer redder Vivid Colour On Off Automatically adjusts colours to vivid ones Adaptive Backlight Control Automatically controls the level of backlight according to the images AS Noise reduction settings 1 Display the menu with MSNU 2 Select Picture gt Noise Reduction MPEG Noise Reduction with A W and press X to access 3 Set with W and press to store Noise Reduction Auto Max Mid Min Off Reduces unwanted picture noise e Not valid when 1080p Pixel Direct is set to On 39 42 50 inches model MPEG Noise Reduc
38. For best audio gt Audio Description e For DVB Headphones Mix Standard Set to Mix to activate the description sound track from headphones ON Watching gt For best audio gt Audio Description e For DVB 159 Advanced settings MPX Selects multiplex sound mode if available N Watching gt For best audio gt Advanced settings e For Analogue Audio Preference Auto Multichannel Stereo MPEG Selects the initial setting for audio tracks I Watching gt For best audio gt Advanced settings e For DVB SPDIF Selection Auto PCM Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 ARC function terminals LE Watching gt For best audio gt Advanced settings e For DVB or video contents of Media Player Network services N Watching gt For best audio gt Advanced settings SPDIF Delay Adjusts the delay time of the sound output from DIGITAL AUDIO and HDMI2 ARC function terminals if the sound does not synchronise the image COO Watching gt For best audio gt Advanced settings e For DVB HDMI Input Digital Analogue Selects to fit the input signal N Watching gt For best audio gt Advanced settings e For HDMI input Reset to Defaults Resets the current Sound Mode to the default settings 160 Network Network Connection sets the network setting to use this TV in your network environment O Network gt Network settings gt N
39. JM to access 3 Select the time with A Y and press JK to set lf any software updates are available the notification message will appear To install new software select Standby Now with lt gt and press X to set Standby Installs new software in standby condition Now Installs new software now If System Update is performed the software will be updated TV functions may be changed If you do not want to do so set Auto Update Search in Standby to Off e The automatic updating cannot be performed under the following conditions TV turned off with Mains Power On Off switch Note e Download may take a few hours e During software download and update DO NOT switch off the TV 146 e A notification message may be a reminder In this case schedule information the date when the new version can be used will appear You can set the reservation for update The update will not start when the TV is off Manual update You can update new software manually 1 Display the menu with WSNS 2 Select Setup gt System Menu gt System Update gt System Update Search Now with WV and press to access 3 Searches for an update for several minutes and displays a corresponding message if any 4 Download with 0 Note e Download may take a few hours e During software download and update DO NOT switch off the TV 147 setting characters Using Numeric buttons Y
40. NS 2 Select Network gt Network Link Settings with A Y and press X to access 3 Select one of the following items with W and press to access DLNA Server Registration Type Remote Device List 4 Set with A W lt gt and press K to store DLNA Server On Off Enables to share the contents of this TV with the network equipment DLNA Certified VIERA etc e To use this function with another VIERA select the name of this TV from the DLNA server list of another VIERA and then select the content to share Also read the manual of another VIERA e To use this function with your smartphone you need to install the application for controlling VIERA on your smartphone For information of the application http panasonic net viera support English only For the operations refer to the support information of the application Registration Type Auto Manual Selects the type to restrict the access to this TV for each piece of equipment on the home network Auto All available equipment on the home network is accessible maximum 16 pieces of equipment Manual Sets the restrictions for each piece of equipment in Remote Device List Remote Device List Lists the equipment accessible to this TV on the home network 113 Note e Depending on the area this function may not be available For details consult your local Panasonic dealer File Sharing Settings Network Device List L
41. Press Hj E 9 GB coloured buttons while the page is displayed 2 Press and hold 0 e The stored page number changes to white e To change stored pages 1 Press ME E 9 WB coloured buttons to change 2 Enter a new page number with NUE Toa ogg 4 6 EaIERIED E 3 Press and hold 0K E View sub page The number of sub pages is displayed on the top of the screen Press lt gt to view sub page Only when teletext has more than one page e The number of sub pages varies depending on the broadcasters up to 79 pages e Searching may take time while you are watching TV e To view a specific sub page 1 Press MENU 2 Press blue 3 Enter the 4 digit number e g P6 press 0 0 0 6_ 64 Teletext mode Teletext services are the text information provided by the broadcasters e The features may vary depending on the broadcasters 1 Display the menu with MEWY 2 Select Setup gt Display Settings gt Teletext with AA W and press X to access 3 Select TOP FLOF List with A W and press to set E FLOF FASTEXT mode In FLOF mode four differently coloured subjects are situated on the bottom of the screen To access more information about one of these subjects press the appropriate coloured button This facility enables fast access to information on the subjects shown E TOP mode in case of TOP text broadcasting TOP is a particular improvement of the standard teletext s
42. Select the contents with lt gt and press N to access e The mode can be switched in the current device _76 Network device You can enjoy photo video or music stored in the network devices e To enable this function connect this TV to your home network U3 Network gt Network connections LE Network gt Network settings E How to set User Password 1 Display the menu with WSNS 2 Select Network gt File Sharing Settings gt Network Device List with A W and press JX to access 3 Select the network device with Y and press JK to access 4 Enter User Password with A WY lt gt or AMME ioa and press to set e To register the new network device set Server Name Shared Folder For details read the manual of the equipment 5 Select Register with and press N to set e To delete the registered device select Delete with A W and press to set Note e Regarding performance not all servers are guaranteed PCs with Windows 7 Windows 8 Windows 8 1 have been tested for compatibility with this TV as of December 2013 Additional information for the servers may be found on the following website http panasonic net viera support English only 77 Photo mode Selecting file Select the file in the thumbnail view with A Y lt gt and press AX to start playback Error display To change the size of photos in the thumbnail view 1 D
43. USB devices or USB HUB may not be used with this TV e You cannot connect any devices by using USB card reader e Additional information for the devices may be on the following website http panasonic net viera support English only 31 E lo listen with speakers 1 iini 1 DIGITAL AUDIO Optical digital audio cable Amplifier with speaker system e To enjoy multi channel sound from external equipment e g Dolby Digital 5 1ch connect the equipment to the amplifier For the connections read the manuals of the equipment and amplifier To select the sound output set Speaker Setting O Watching gt For best audio gt Volume settings E Headphones 1 Headphone jack M3 stereo mini plug Headphones e To adjust volume set Headphone Volume N Watching gt For best audio gt Advanced settings e To select the sound output set Speaker Setting O Watching gt For best audio gt Volume settings 220s Watching external input Connect the external equipment VCR DVD etc and you can watch through the input 1 2 Display the input selection menu with I Select the input mode connected to the equipment with and press to watch The selected mode is displayed on the top left of the screen TV receives input signals automatically connecting with SCART when playback starts Input signals are automatically identified by the SCART pin 8 terminal This function is also av
44. You cannot make such settings on this TV Read the manual of the equipment lf your modem has no broadband router functions use a broadband router lf your modem has broadband router functions but there are no vacant ports use a hub Ensure that the broadband routers and hubs are compatible with 10BASE T 100BASE TX If you use the equipment compatible only with 1OOBASE TX category 5 or later LAN cables are required Contact your Internet Service Provider ISP or telecommunications company for further assistance regarding the network equipment Confirm the terms and conditions of the contracts with your Internet service Provider ISP or telecommunications company Depending on the contracts additional fees may be charged or multiple connections to the internet may be impossible Turn the TV off and then on again when changing or making the network connection again 104 Network settings Network Connection Ensure the connections are completed before starting network setup LON gt Network gt Network connections Quick setup Wireless Display the menu with WisNie 2 Select Network gt Network Connection with A W and press JX to access o_o e Confirm the encryption key settings and position of your access point before starting setup For details read the manual of the access point 3 Select Quick setup with lt gt and press X to access e When the LAN cable is connected wired s
45. absolutely sure to take steps to prevent the TV from falling off Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage Take care when fixing wall brackets to the wall Always ensure that there are no electrical cables or pipes in the wall before hanging bracket To prevent fall and injury remove the TV from its fixed wall position when it is no longer in use 180 Licence Licence Even if no special notation has been made of company or product trademarks these trademarks have been fully respected DVB and the DVB logos are trademarks of the DVB Project Skype is a trade mark of Skype Limited DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living Network Alliance Windows is a registered trademark of Microsoft Corporation in the United States and other countries Mac is a trademark of Apple Inc HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries HDAVI Control is a trademark of Panasonic Corporation Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories For DTS patents see http patents dts com Manufactured under license from DTS Licensing Limited DTS the Symbol amp DTS and the Symbol together are reg
46. ailable for HDMI connections When input mode is not switched automatically perform as above or check the setup of the equipment You can also select the input pressing AV Press repeatedly until the desired input is selected To switch between COMPONENT and VIDEO in AV2 select with lt E You can label or skip each input mode Skipped inputs will not be displayed when AV is pressed Input Labels The remote control is capable of operating the contents or external equipment N Watching gt External equipment gt Operating with TV s remote control To return to TV mode Note If the external equipment has an aspect adjustment function set it to 16 9 For details read the manual of the equipment or ask your local dealer 33 E Input Labels Accesses the input labels list to select the label of each input mode or set to skip unconnected one for easier identification and selection in TV Selection Input Selection or banner N Watching gt Basic gt Information banner 1 Display the menu with WSNS 2 Select Setup gt Display Settings gt Input Labels with Y and press to access 3 Set with A V lt gt and press f to set e To name each input mode freely select User input and set characters maximum 10 characters e To skip the input mode select Skip Operating with TV s remote control You can operate the contents in Media Player media server recording functions or the connected
47. ain G Gain B Gain Adjusts the white balance of bright red green blue areas R Cutoff G Cutoff B Cutoff Adjusts the white balance of dark red green blue areas Reset to Defaults Resets White Balance to the default settings E Colour Management R Hue R Saturation R Luminance Adjusts the picture hue saturation luminance of red areas G Hue G Saturation G Luminance Adjusts the picture hue saturation luminance of green areas B Hue B Saturation B Luminance Adjusts the picture hue saturation luminance of blue areas 47 Reset to Defaults Resets Colour Management to the default settings E Gamma Gamma Switches the gamma curve e Please note the numerical values are reference for the adjustment Reset to Defaults Resets Gamma to the default settings E Reset to Defaults Reset to Defaults Resets Advanced Settings to the default settings Option Settings 1 Display the menu with Wau 2 Select Picture gt Option Settings with 4 W and press to access 3 Select one of the following items with W and press N to access Film Cadence Mode 1080p Pixel Direct HDMI Content Type HDMI RGB Range AV Colour System 3D COMB 4 Set with W and press X to store Film Cadence Mode On Off Improves vertical resolution for movie images e This function is available for interlaced signals except in Network services 1080p Pixel Direct
48. al Rating To watch the DVB programme that has rating information on the selected age enter the PIN number depending on the broadcaster 1 Select Parental Rating with Y and press M to access 2 Select an age for the restriction of programmes with A WY and press to set The availability of this function depends on the country you select Note e Setting Shipping Condition erases the PIN number and all settings 140 Data Service Application Using Data Service Application You can enjoy Hybrid Broadcast Broadband TV application that is one of the interactive data services for digital broadcasting 1 Display TV Selection with gi 2 Select the mode with WV and press s to set DVB C DVB T 3 Display the menu with MSNU 4 Select Setup gt Data Service Application gt Service with 4 W and press to access 5 Select Auto Start On with WV and press to set e A notification message will appear when the application is available Follow the on screen instructions is displayed on the information banner if the programme has Hybrid Broadcast Broadband TV application O Watching gt Basic gt Information banner To stop the application EXIT Cookie 1 Display the menu with WSNS 2 Select Setup gt Data Service Application gt Store Cookie Delete Cookie with WV and press to access Store Cookie On Off Enables to store the technical information that a
49. as Even during good weather the high pressure can cause poor reception of some channels e Due to the digital reception technologies involved quality of the digital signals may be relatively low in some cases despite good reception of analogue channels e Turn the TV off with Mains Power On Off switch then turn it on again No programmes shown on TV Guide e Adjust the direction of the aerial to another transmitter installed nearby Analogue IV Before requesting service or assistance please follow these simple guides to solve the problem If the problem still persists please contact your local Panasonic dealer for assistance White spots or shadow image ghosting occurs Some channels cannot be tuned e Check the position direction and connection of the aerial e Weather conditions will affect signal reception heavy rain snow etc in particular in poor reception areas Even during good weather the high pressure can cause poor reception of some channels Turn the TV off with Mains Power On Off switch and then on again If the problem persists consult your local dealer or service provider for the availability of services No programmes shown on TV Guide e Adjust the direction of the aerial to another transmitter installed nearby e Check the analogue broadcast If the image quality is poor check the aerial and consult your local dealer 173 Sound Before requesting service or assistance plea
50. ation Displays the system information of the GUIDE Plus system only available in some countries 61 e DVB T and Analogue channels are displayed on the same TV Guide screen D and Amay be displayed to distinguish DVB T and Analogue channels There will be no programme listings for Analogue channels 62 Teletext Viewing Teletext 1 E 1 2 Switch to teletext with IS Displays the index page content varies depending on the broadcasters Current sub page numbers are displayed on the top left of the screen Time date is displayed on the top right of the screen Colour bar is displayed on the bottom of the screen Select the page with AMME iee A V or Bi a il coloured buttons GI2IBI oga oog E To adjust contrast 1 Press WISNU three times to display Contrast 2 Adjust with lt gt and press X to set To exit teletext EXIT Reveal hidden data Press Wied Reveal with Hi red Press again to rehide To view a favourite page stored Press to view a favourite page E ie 2 Call up the page stored on E blue List mode Factory setting is P103 FULL TOP BOTTOM Press MSNU Press J green to change the layout 63 E Watch TV and teletext in two windows at once 1 Press WISNU twice 2 Set Picture and text to On Off with A W e Operations can be made only in teletext screen E Store frequently viewed pages in the colour bar List mode 1
51. ccess to special features such as Media Player TV internet content data services communication tools etc 1 Display Home Screen with g 0 3 Example e The last viewed Home Screen is displayed when the TV is turned on e Press again to select or add your preferred Home Screen layout CEM my Home Screen gt my Home Screen gt Settings 2 Select a feature with WY lt gt and press N to access e To watch full screen TV 1 Select the TV viewer with A lt gt Example 2 Press K to watch Example e Also refer to Tutorial from the tool guide 11 Settings Select the setup menu from the tool guide on the top of the screen Example E Home Screen Selection 1 Display Home Screen Selection with gfe Wis Example 2 Select the screen with lt gt and press N to set Full Screen TV Displays full screen TV TV Home Screen To make your TV experience more convenient and comfortable Lifestyle Screen Displays the TV with useful information and services for everyday life Info Screen Enjoy internet content while watching TV E Settings You can customise any Home Screen For example changing the wallpaper renaming freely editing applications setting the screen launched when the TV is turned on etc 1 Select Settings from the tool guide 2 Follow the on screen instructions 12 E Search You can search the content from various f
52. channels gt Manual Tuning Only for the revealed channels e To rename the channel name Analogue 1 Press blue to edit 2 Enter characters maximum 5 characters with A W lt gt or EAAS and press OK to set oag 4 5 FaIERIED m 69 3 Press 370 NASUN to store Note e If a VCR is connected only with the RF cable in Analogue edit VCR Auto Setup Automatically retunes the channels received in the area e This function is available if channel tuning is already performed e Only the selected mode is retuned All the previous tuning settings are erased e If Child Lock PIN number has been set the PIN number is required CUN Functions gt Child Lock gt PIN number e f tuning has not been done completely set Manual Tuning Watching gt Tuning and editing channels gt Manual Tuning E DVB C DVB T Analogue 1 Select Auto Setup with Y and press M to access 2 Set DVB C Auto Setup Settings with A W lt gt and press JN to store DVB C e Scan Mode Full scans the whole frequency range Quick scans the suitable frequency in your country e Normally set Frequency Symbol Rate and Network ID to Auto If Auto is not displayed or if necessary enter each value specified by your cable provider with NURIA Jroa GI2IBI Esiraics poga E e After settings select Start scan with A and press to search 3 The confirmation screen is displayed and press t
53. content or content protected by other content access technologies Content owners may require you to upgrade PlayReady to access their content If you decline an upgrade you will not be able to access content that requires the upgrade This product incorporates the following software 1 the software developed independently by or for Panasonic Corporation 2 the software owned by third party and licensed to Panasonic Corporation 3 the software licensed under the GNU LESSER GENERAL PUBLIC LICENSE Version 2 1 LGPL V2 1 4 the software licensed under the GNU GENERAL PUBLIC LICENSE Version 2 GPL V2 and or 5 open sourced software other than the software licensed under the LGPL V2 1 and GPL V2 182 The software categorized as 3 4 and 5 are distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE Please refer to the detailed terms and conditions thereof shown in the Software License menu on this product At least three 3 years from delivery of this product Panasonic will give to any third party who contacts us at the contact information provided below for a charge no more than our cost of physically performing source code distribution a complete machine readable copy of the corresponding source code covered under LGPL V2 1 GPL V2 or the other licenses with the obligation to do so as well as the
54. creen If the software is not updated you may not be able to use APPS List You can update the software later manually LE Network gt Network settings gt Software Update The services through APPS List are operated by their respective service providers and such service may be discontinued either temporarily or permanently without notice Therefore Panasonic will make no warranty for the contents or the continuity of the services Some contents may be inappropriate for some viewers some contents may only be available for specific countries and may be presented in specific languages Depending on the connection environment the internet connection may be slow or may not be successful During the operation audio signal is output from DIGITAL AUDIO and HDMI2 ARC function terminals But no video signals are output To use HDMI2 with ARC function connect an amplifier that has ARC function and set to use theatre speakers i Functions gt VIERA Link HDAVI Control 96 DLNA Information This TV is a DLNA Certified product DLNA Digital Living Network Alliance is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network To learn more visit www dina org e To enable this function connect this TV to your home network EH Network gt Network connections I Network gt Network settings E Playback of sharing contents stored in the media server
55. ct Setup gt Tuning Menu with W and press N to access DVB C Tuning Menu DVB T Tuning Menu Analogue Tuning Menu e The menu name varies depending on the TV mode 5 Select one of the functions with and press to access Favourites Edit Channel List Auto Setup Manual Tuning Update Channel List Favourite Network New Channel Message Service Replacement Signal Condition Attenuator Add TV Signal e The function items vary depending on the TV mode and country you select Favourites Edit E List favourite DVB channels Create your favourite channel lists from various broadcasters up to 4 Favourites 1 to 4 The favourites lists are available from Category in the information banner and the TV Guide screen ON Watching gt Basic gt Information banner LE Watching gt TV Guide gt Using TV Guide 1 Select Favourites Edit with W7 and press N to access 2 Select a channel to list from all DVB channels with A W e appears when the channel is encrypted e To display other favourites E green e To sort channel names in alphabetical order Ge red 67 3 4 e To change the category E blue Press to add it to favourites list e To add all channels to the list 1 Press P yellow 2 Press E green to add all e To add consecutive channels to the list at once 1 Press 4 yellow 2 Make the channel block with Y and press JK to add Press ENS and O to
56. cts the screen area displaying the image for 16 9 aspect On Enlarges the image to hide the edge of the image Off Displays the image in the original size e Set to On if noise occurs on the edge of the screen e This function can be memorised for SD Standard definition and HD High definition signals respectively e Not valid in Network services H Size H Size1 H Size2 Switches the horizontal display range to reduce noise on the side edge of the image e For TV mode AV and HDMI input Zoom Adjustments Adjusts the vertical position and size when aspect is set to Just Sidecut Just Zoom or Sidecut Zoom screen Display On Off Turns the screen off when you select Off This function is effective in reducing power consumption when listening to the sound without watching the TV screen e Press any buttons except Standby On Off switch to turn the screen on 50 Copy Adjustment Copies the picture settings of True Cinema or Custom to those of another input or another Viewing Mode 1 Display the menu with WIEN 2 Select Picture gt Copy Adjustment gt Destination Viewing Mode Destination Input with W and press X to access 3 Select the destination to copy to with V7 and press JX to set 4 Select Copy Start with Y and press JX to copy 5 When the confirmation screen is displayed select Yes with lt gt and press to set Note e Option Settings and Screen S
57. dard is compatible with conventional HDAVI equipment e To confirm the HDAVI Control version of this TV TN Support gt Information gt Using Help menu 138 Child Lock Using Child Lock You can lock specific channels AV input terminals to restrict access to them When the locked channel input is selected a message appears Enter the PIN number to watch 1 Display the menu with WSNS 2 Select Setup gt Child Lock with A Y and press M to access 3 Enter the PIN number 4 digits with NUE Jte GIB opg oog CE e Enter the PIN number twice at first setting e Make a note of the PIN number in case you forget it e 0000 may be stored as the default PIN number depending on the country you select 4 Select Child Lock List with A 4 and press N to access 5 Select the channel input with 4 4 and press to lock e dm appears when the channel input is locked e To cancel 1 Select the locked channel input with Ay W 2 Press 0 e To sort channel names in alphabetical order Ge red e To lock all E green e To cancel all locks E yellow e To jump to the head of the next channel input group blue 139 PIN number You can change the PIN number 1 Select Change PIN with W and press N to access 2 Enter a new PIN number twice with NERIA Tiroa J 2 3 ong pog CE Note e Setting Shipping Condition erases the PIN number and all settings Parent
58. e Access the menu store settings after adjustments have been made or options have been set with INPUT OK HOLD for MENU button 151 Picture Viewing Mode Selects your favourite picture mode for each input Dynamic Normal Cinema True Cinema Custom ON Watching gt For best picture gt Viewing Mode Basic settings Backlight Contrast Brightness Colour Tint Sharpness Adjusts the levels of these options according to your personal preference LE Watching gt For best picture gt Basic settings Colour Temperature Cool2 Cool1 Normal Warm1 Warm2 Sets the overall colour tone of the picture bluer redder LE Watching gt For best picture gt Basic settings Vivid Colour On Off Automatically adjusts colours to vivid ones O Watching gt For best picture gt Basic settings Adaptive Backlight Control Automatically controls the level of backlight according to the images LE Watching gt For best picture gt Basic settings Ambient Sensor Automatic Brightness Control function Adjusts picture settings automatically depending on ambient lighting conditions On Off ON Watching gt For best picture gt Ambient Sensor 152 Noise reduction settings Noise Reduction Auto Max Mid Min Off Reduces unwanted picture noise I Watching gt For best picture gt Noise reduction settings e Not valid when 1080p Pixel Direct is set to On 39 42 50 inches model MPEG
59. eatures 1 Select Search from the tool guide 2 Follow the on screen instructions e To change the colour type of on screen displays set OSD Colour CON my Home Screen gt my Home Screen gt OSD Colour e To use this function fully you need a broadband network environment Ensure the network connections and network settings are completed EJ Network gt Network connections LE Network gt Network settings Be sure to update the software when a software update notice is displayed on the TV screen If the software is not updated you may not be able to use my Home Screen You can update the software later manually LE Network gt Network settings gt Software Update OSD Colour 1 Display the menu with WISNU Select Setup gt Display Settings gt OSD Colour with A W and press 2 to access 3 Set with A Y and press 8X to store OSD Colour Jet black Pale grey Organic brown Sand beige Selects the preferred colour type of on screen displays e This function is available for the information banner menu screen Home Screen etc 2405 APPS List Information Various applications internet contents network contents Media Player etc can be accessed easily from APPS List E APPS List Example Note e APPS List is subject to change without notice How to use You can access special features such as internet contents network contents Media Player etc fr
60. en displays LO Watching gt Basic gt Language Preferred Audio 1 2 Selects the first and second preferred language for DVB multi audio depending on the broadcaster LE Watching gt Basic gt Language Preferred Subtitles 1 2 Selects the first and second preferred language for DVB subtitles depending on the broadcaster LE Watching gt Basic gt Language Preferred Teletext Selects the preferred language for DVB teletext service depending on the broadcaster O Watching gt Basic gt Language Display Settings OSD Colour Jet black Pale grey Organic brown Sand beige Selects the preferred colour type of on screen displays CON my Home Screen gt my Home Screen gt OSD Colour Preferred Subtitle Type Standard Hard of Hearing Selects the preferred subtitle type CON Watching gt Basic gt Subtitle 166 Teletext TOP FLOF List Selects teletext display mode LE Watching gt Teletext gt Teletext mode Teletext Character Set West East1 East2 Selects teletext language font ON Watching gt Teletext gt Teletext Character Set Default Guide Channel List TV Guide Selects the default screen when pressing AUDE CON Watching gt TV Guide gt Using TV Guide e This function may not be available in some countries or regions Input Labels Accesses the input labels list to select the label of each input mode or set to skip unconnected one f
61. equipment with the below buttons of this TV s remote control Playback VCR DVD video content Stop the operations wa Rewind view the picture rapidly in reverse VCR Skip to the previous track title or chapter DVD video content a Rewind view the picture rapidly in reverse VCR Search backward DVD video content m Fast forward view the picture rapidly forward VCR Skip to the next track title or chapter DVD video content Fast forward view the picture rapidly forward VCR Search forward DVD video content Lu Pause Resume 34 Press and hold to play at slow speed DVD Le Start recording DVD Recorder VCR E How to change the code Each Panasonic product has its own remote control code Change the code according to the product for operation 1 Press and hold Standby On Off switch during the following operations 2 Enter the appropriate code as follows with NUMEA Jti HII opg oog CE e Codes for each product and features 70 DVD Recorder DVD Player Blu ray Disc Player 71 Player theatre Blu ray Disc theatre 72 VCR 73 default Using in Media Player DLNA features or VIERA Link 3 Press to change Note e Confirm if the remote control works correctly after changing the code e The codes may be reset to defaults if batteries are replaced e Some operations may not be available depending on the equipment s35 s HDMI features HDMI
62. er Time Zone Adjusts the time data CON Watching gt Basic gt Adjusting time Auto Standby Automatically turns the TV to Standby mode for energy saving when no operation is performed for 4 hours On Off LE Watching gt Basic gt Energy saving functions No signal Power off Automatically turns the TV to Standby mode to prevent unnecessary power consumption when no signal is received and no operation is performed for 10 minutes On Off LE Watching gt Basic gt Energy saving functions 163 setup Eco Navigation Automatically sets the TV to the most suitable energy saving mode ON Watching gt Basic gt Energy saving functions USB Device Setup Safely removes USB device O Media Player gt Using Media Player gt Information Child Lock Applies access control for channels or inputs to prevent unwanted access U3 Functions gt Child Lock gt Using Child Lock Tuning Menu Favourites Edit Creates a list of favourite channels CON Watching gt Tuning and editing channels gt Favourites Edit e Not valid in Analogue Channel List Skips unwanted channels or edits channels N Watching gt Tuning and editing channels gt Channel List Auto Setup Automatically searches for receivable channels CTN Watching gt Tuning and editing channels gt Auto Setup Manual Tuning Searches for channels manually C Watching gt Tuning and editing channels gt Manual Tunin
63. ers of connected equipment e To confirm the current network settings U3 Network gt Network settings gt Network Status 110 e Ensure the equipment to connect supports WPS for this setup e WPS Wi Fi Protected Setup Network Status Displays and checks the network status MAC Address current network settings etc 1 Display the menu with MSY 2 Select Network gt Network Status with 4 and press to access 3 Automatically testing is done and Network Status Is displayed Try Again Performs automatic testing of the network connection for the TV and displays the current status again Status Details Displays the detailed network status SSID security type encryption type etc e For more information of the network connection select Help my Home Cloud Settings Sets for an account to enjoy the cloud services 1 Display the menu with WSNS 2 Select Network gt my Home Cloud Settings with A V and press 6M to access 3 Select one of the following items with W and press 6 to access 4 Follow the on screen instructions Setup new account Set up an account for this TV Edit account Displays and edits the account status Remove account Deletes an account from this TV Notices Displays the terms of service 111 e To use this function fully you need a broadband network environment Ensure the network connections and network settings are completed
64. ervice that results in an easier search and effective guide e Fast overview of the teletext information available e Easy to use step by step selection of the topical subject e Page status information on the bottom of the screen e Available page up down E red HB green e To select among subject blocks GB blue e To select next subject within the subject block E yellow After the last subject it moves to the next subject block E List mode In List mode four differently coloured page numbers are situated on the bottom of the screen Each of these numbers can be changed and stored in the TV s memory ON Watching gt Teletext gt Viewing Teletext 05 Teletext Character Set selects teletext language font 1 Display the menu with MSY 2 Select Setup gt Display Settings gt Teletext Character Set with A W and press to access 3 Select the font with Y and press K to set West English French German Greek Italian Spanish Swedish Turkish etc East1 Czech English Estonian Lettish Rumanian Russian Ukrainian etc East2 Czech Hungarian Lettish Polish Rumanian etc 66 Tuning and editing channels Setting menu You can retune channels create your favourite channel lists skip unwanted channels etc 1 Display TV Selection with gi 2 Select the mode with WV and press s to set DVB C DVB T Analogue 3 Display the menu with MSNU 4 Sele
65. essing ij red at each item if available You can select from among alternatives with 4 and press to set You can adjust using the slide bar with lt gt and press X to set You can go to the next screen with 0K You can enter names or numbers freely for some items 1 Enter characters one by one with A W lt gt and press K to set You can set characters using MASA OA ON Functions gt Setting characters gt Using Numeric buttons 2 Press SyN ix a GIN to store To reset the settings To initialise picture or sound settings only select Reset to Defaults in the Picture Menu or Sound Menu To initialise all settings select Shipping Condition ON Functions gt Shipping Condition To exit the menu screen EXIT To return to the previous screen BACK RETURN 150 e To change menu pages A Y e To change the colour type of on screen displays set OSD Colour LONI my Home Screen gt my Home Screen gt OSD Colour Note e Menu items and selectable options vary depending on the mode TV mode Media Player Network services etc E Using control panel buttons 1 Press and hold INPUT OK HOLD for MENU button for 3 seconds to display the menu 2 Select and set with following control panel buttons e Move the cursor select from a range of options select the menu item up and down only adjust levels left and right only A a fj gt i ve lt j
66. ettings will not be copied 51 For best audio Sound mode 1 Display the menu with MSY 2 Select Sound gt Mode with A W and press to access 3 Select the mode with WV and press s to set Mode Standard Music Speech User Selects your favourite sound mode for each input Standard Provides the suitable sound quality for all types of scenes Music Improves sound quality for watching music videos etc Speech Improves sound quality for watching news drama etc User Adjusts the sounds manually using the equaliser to suit your favourite sound quality e In each mode Bass Treble and Surround can be adjusted and stored e For the User mode Equaliser will be available in the Sound Menu instead of Bass and Treble Select Equaliser and adjust the frequency O Watching gt For best audio gt Advanced settings e This function is effective only for the sound from TV speakers 52 Basic settings 1 Display the menu with MSNU 2 Select Sound with 4 W and press X to access 3 Select one of the following items with W and press 6 to access Bass Treble Equaliser Balance Surround 4 Set with A W lt 1 gt and press to store Bass Adjusts level to enhance or minimise lower deeper sound output Treble Adjusts level to enhance or minimise sharper higher sound output Equaliser Adjusts the frequency level to suit your favourite sound quality e This func
67. etup will be done automatically 4 Select your desired access point with A W and press to access e Available Wireless Networks are displayed automatically ke Encrypted access point e For WPS Push button 1 Select Easy setup with Push button with A Y and press fM to access 2 Press the WPS button on the access point until the light flashes 3 Connect the TV with the access point with 0 WPS Wi Fi Protected Setup Ifthe connection has failed check the settings and positions of your access point And then follow the on screen instructions e It is recommended to select the encrypted access point 5 Enter the encryption key of the access point with W lt gt and press to set e You can set characters using Nace otiia 4 2 3 ong pog CE e Press 57X0 NI RUIN to store 6 Automatically setup is done and Network Status is displayed TN Network gt Network settings gt Network Status 7 Select Exit with lt gt and press to set 105 To set manually m Network gt Network settings gt Custom Wireless Quick setup Wired Display the menu with WISNU Select Network gt Network Connection with A W and press X to aCCess 3 Select Quick setup with lt gt and press JX to access Automatically setup is done and Network Status is displayed N Network gt Network settings gt Network Status Select Exit with
68. etwork Connection Network Status Displays and checks the network status MAC Address current network settings etc CTN Network gt Network settings gt Network Status my Home Cloud Settings Sets for an account to enjoy the cloud services CEM Network gt Network settings gt my Home Cloud Settings VIERA Name Sets your favourite name for this TV LE Network gt Network settings gt VIERA Name TV Remote App Settings Sets to control the TV from network equipment Smartphone etc N Network gt Network settings gt TV Remote App Settings Network Link Settings Sets to control the TV with devices connected to the network N Network gt Network settings gt Network Link Settings File Sharing Settings Network Device List Lists the accessible network devices to play back the contents in Media Player U3 Media Player gt Using Media Player gt Network device 161 Other settings Software Update Checks for available software updates from the Panasonic website LE Network gt Network settings gt Software Update New Software Message On Off selects whether to give a notification message when new software is found via network or not C Network gt Network settings gt New Software Message 162 Timer Off Timer sets the duration of time until the TV automatically goes into Standby mode 90 75 60 45 30 15 Off minutes CON Watching gt Basic gt Off Tim
69. for the encryption type e To search access points again E blue To display hide information of the highlighted access point E3 e It is recommended to select the encrypted access point 4 Enter the encryption key of the access point with A W lt gt and press to set e You can set characters using Nace otiia oag 4 6 6 FaIERIED CE e Press 27X0 d SAOIR to store 5 IP DNS Settings is displayed Acquire IP Address Acquire DNS Address e Auto is recommended e Available settings are displayed automatically e To set manually select and set IP Address Subnet Mask Default Gateway DNS Address 107 Proxy Settings e It is not required for normal household use e Some internet services may not be available depending on the proxy settings Proxy This is the address of the relay server which is connected between the browser and the target server to send data to the browser 1 Select Proxy with 4 4 and press N to access 2 Enter the address with A WY lt gt or NMEA NaS and press N to set GIB oga AS oJ 3 Press SyAN GIN aRGINN to store Proxy Port This number is also specified by the provider with the proxy address 1 Select Proxy Port with Ay W 2 Enter the number with NUCA olola MIZE 4 5 FeIERIED E 3 Press 370 NINIS to store 6 Select Network Status with Y and press JK to access U3 Network gt Network set
70. g Update Channel List Updates the channel list while keeping your settings Ce Watching gt Tuning and editing channels gt Update Channel List e For DVB 164 Favourite Network Selects your favourite network for each broadcasters only available in some countries i Watching gt Tuning and editing channels gt Other settings e For DVB C DVB T New Channel Message On Off Selects whether to give a notification message when a new channel is found or not CO Watching gt Tuning and editing channels gt New Channel Message e For DVB Service Replacement On Off Set to On to display a message to switch to the available service only available in some countries CON Watching gt Tuning and editing channels gt Other settings e For DVB C Signal Condition Checks the signal condition CON Watching gt Tuning and editing channels gt Signal Condition e Not valid in Analogue Attenuator On Off Automatically reduces the DVB C signal to avoid the interference LE Watching gt Tuning and editing channels gt Other settings Add TV Signal Adds the TV mode CO Watching gt Tuning and editing channels gt Other settings 165 Note e The settings in Tuning Menu are applicable only for the selected TV mode The menu name varies depending on the TV mode DVB C Tuning Menu DVB T Tuning Menu Analogue Tuning Menu Language OSD Language Changes language for on scre
71. g gt For best audio gt Volume settings 157 Voice Guidance Settings Voice Guidance On Off set to On to enable voice guidance of the basic features menu item on screen messages etc for visually impaired users LON Watching gt For best audio gt Voice Guidance Settings Speed Fast Normal Slow Selects the readout speed for the voice guidance LE Watching gt For best audio gt Voice Guidance Settings Volume Max Mid Min selects the volume for the voice guidance CON Watching gt For best audio gt Voice Guidance Settings Language Changes language for the voice guidance LE Watching gt For best audio gt Voice Guidance Settings User Level Beginner Expert Selects the level of verbosity for the voice guidance CO Watching gt For best audio gt Voice Guidance Settings Web Browser On Off Set to On to enable voice guidance of the network contents in web browser function LE Watching gt For best audio gt Voice Guidance Settings 158 Audio Description Preferred Audio Type Standard Audio Description Narration settings for visually impaired users N Watching gt For best audio gt Audio Description e For DVB Volume Adjusts the volume for Audio Description N Watching gt For best audio gt Audio Description e For DVB Speakers Mix Standard Set to Mix to activate the description sound track from TV speakers ON Watching gt
72. gs Settings for the GUIDE Plus system LON Watching gt TV Guide gt Using TV Guide Power Save On Off Reduces brightness of the picture to economise on power consumption 170 Support FAQs Picture Before requesting service or assistance please follow these simple guides to solve the problem If the problem still persists please contact your local Panasonic dealer for assistance Auto aspect e Auto aspect is designed to provide you with the best ratio to fill the screen O Watching gt For best picture gt Aspect Control Signal e Press if you want to change the aspect ratio manually ON Watching gt For best picture gt Aspect Black and white picture e Check that the output of the external equipment matches the input of the TV When connecting with SCART ensure the output setting of the external equipment is not S Video Chaotic image noisy e Set Noise Reduction and MPEG Noise Reduction in the Picture Menu to remove noise N Watching gt For best picture gt Noise reduction settings Check nearby electrical equipment car motorcycle fluorescent lamp 171 No image can be displayed e Check the correct input mode is selected e Check the setting of AV2 COMPONENT VIDEO in Input Selection to match the output of the external equipment N Watching gt External equipment e Is Contrast Brightness or Colour in the Picture Menu set to the minimum N Watching gt For be
73. his TV on the other DLNA Certified VIERA your smartphone etc connected to your home network You can also watch the current digital TV programme on the other DLNA Certified VIERA For example watching the continuation of the current programme on another VIERA etc 1 Available contents e Contents that can be played back in Media Player of this TV and another piece of network equipment 2 To use this function with your smartphone you need to install the application for controlling VIERA in your smartphone For information of the application http panasonic net viera support English only For the operations refer to the support information of the application e To use this function with another DLNA Certified VIERA set Network Link Settings of this TV O Network gt Network settings gt Network Link Settings e Sharing the current programme may not be available when selecting radio channels encrypted copy protected programmes or when the broadcast prohibits the output of video and audio e To use this function turn this TV on e This function is available only with 1 piece of other equipment e You may be able to control this TV to turn off the TV display and mute the sound using your smartphone For details refer to the support information of the application 99 Using DLNA To use DLNA features ensure the preparations of the media server network connections and network settings are completed
74. htly and clattered sound is heard when it is pushed with a finger e There is a little gap around the panel to prevent damage to the panel This is not a malfunction 177 Maintenance Care and Cleaning First remove the mains plug from the socket outlet E Display panel Cabinet Pedestal Regular care Gently wipe the surfaces of the display panel cabinet or pedestal using a soft cloth to clean the dirt or fingerprints For stubborn dirt 1 First clean the dust on the surface 2 Dampen a soft cloth with clean water or diluted neutral detergent 1 part detergent to 100 parts water 3 Wring the cloth firmly Please note liquids do not enter the TV inside May lead to product failure 4 Finally wipe away all the moisture Caution Do not use a hard cloth or rub the surface too hard otherwise this may cause scratches on the surface Take care not to subject the surfaces to insect repellent solvent thinner or other volatile substances This may degrade surface quality or cause peeling of the paint The surface of the display panel is specially treated and may be easily damaged Take care not to tap or scratch the surface with your fingernail or other hard objects Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time This may degrade surface quality Mains plug Wipe the mains plug with a dry cloth at regular intervals Moisture and dust may
75. ideo Preview to Off EJ Media Player gt Video mode gt Video Setup 2 Start playback with Hj red e If you have stopped the last playback halfway the confirmation screen is displayed to select whether to start from where you stopped last time or from the beginning e For supported file formats O Media Player gt Technical information gt Video format E Thumbnail view e To display hide information of the highlighted content E3 e To start playback Ge red e To change the device 9 yellow e To change the contents E blue 84 Watching video m Playback from the selected scene in the title Playback of the selected scene will start and continue until the end of the title 1 2 3 Select the title with A W lt gt and press N to access Select the scene with A 7 lt gt Start playback with E red The structure of titles and scenes may vary depending on the digital video camera used Playback may not continue depending on the condition To repeat playback Ee Media Player gt Video mode gt Video Setup E Playback e To operate playback lt Rewind gt Fast forward W Stop Pause displays the time seek bar Playback To jump to the specified time point 1 Display the time seek bar with 6 2 While the time seek bar is displayed Press lt gt Search approx 10 seconds Press and hold lt gt Search rapidly 3 Jump to the specified
76. inal RF cable DVD Recorder VCR Terrestrial aerial Cable Note e For VIERA Link connections ON Functions gt VIERA Link HDAVI Control gt Summary of VIERA Link External equipment and cables shown are not supplied with this TV Please also read the manual of the equipment being connected e Keep the TV away from electronic equipment video equipment etc or equipment with an infrared sensor otherwise distortion of image sound may occur or operation of other equipment may be affected e Use a fully wired HDMI compliant cable e Use a fully wired SCART cable e Check the terminal type and cable plugs are correct when connecting 18 Selecting channel 1 2 o_o Display TV Selection with gy Select the mode with V and press N to set DVB C DVB T Analogue e The selectable modes vary depending on the channels stored e You can also select the mode pressing repeatedly e If TV Selection is not displayed press IAY to switch the mode Select a channel with iaktalats Meow Mm Bley ial Or NOA otio Al oaoa ESIESICH Vv pao CE e Press AMME ioa to select a channel position with 2 or more digit e g 399 press 9 To select a channel from the channel list Display the channel list with 0K Select a channel from the list with A Y and press O to watch To sort channel names in alphabetical order Ge red To change the category GB blue To select a chan
77. information e Check the settings of Network Link Settings LU Network gt Network settings gt Network Link Settings Cannot operate internet content e Check the connections and settings CTN Network gt Network connections gt Internet connection LE Network gt Network settings e The server or connected line may be busy now Other Before requesting service or assistance please follow these simple guides to solve the problem If the problem still persists please contact your local Panasonic dealer for assistance VIERA Link function does not work and an error message appears e Check the connections N Functions gt VIERA Link HDAVI Control gt Summary of VIERA Link e Turn the connected equipment on and then switch the TV on CUN Functions gt VIERA Link HDAVI Control Parts of the TV become hot e Even if the temperature of parts of the front top and rear panels has risen these temperature rises do not cause any problems in terms of performance or quality 1 6 Overcurrent error message appears e The connected USB device may cause this error Remove the device and turn the TV off with Mains Power On Off switch then turn it on again e Check foreign objects are not inside the USB port An error message appears e Follow the message s instructions e If the problem persists contact your local Panasonic dealer or the authorised service centre The LCD panel moves slig
78. isplay the option menu with GAON 2 Select Change Size with W and press to change For supported file formats O Media Player gt Technical information gt Photo format Thumbnail view To display hide information of the highlighted content E3 To display Slideshow Settings Ge red CON Media Player gt Photo mode gt Using Slideshow To sort E green To change the device 9 yellow To change the contents blue Viewing photo E Playback To operate Single view lt To the previous photo gt To the next photo W Stop return to thumbnail Slideshow To display hide the operation guide E3 78 e To rotate 90 blue e To return to thumbnail BACK RETURN sorting photos To sort by folder recorded date or recorded month 1 Display the view selection in the thumbnail view with ij green 2 Select Folder view Sort by Date Sort by Month with A WY and press to set Folder view Displays the thumbnail grouped by folder e Files which are not in a folder will be collected to the folder named P Sort by Date Sort by Month Displays the thumbnail grouped by the same date or month e The group of the photos without recorded dates is shown as Unknown e To return to the thumbnail of all photos 1 Display the view selection in the thumbnail view with E green 2 Select All photos with Y and press to set Using Slideshow Slideshow ends when all photos w
79. istered trademarks and DTS 2 0 Digital Out is a trademark of DTS Inc DTS Inc All Rights Reserved Text To Speech Powered by Dragon 2002 2014 Nuance Communications Inc All rights reserved 181 GUIDE Plus Rovi and Rovi Guide are trademarks of Rovi Corporation and or its subsidiaries The GUIDE Plus and the Rovi Guide system are manufactured under license from Rovi Corporation and or its subsidiaries The Rovi Guide system is protected by patents and patent applications filed in the US Europe and other countries including one or more of the United States patents 6 396 546 5 940 073 6 239 794 issued to Rovi Corporation and or its subsidiaries PlayReady is a trademark registered by Microsoft Please be aware of the following a This product contains technology subject to certain intellectual property rights of Microsoft Use or distribution of this technology outside of this product is prohibited without the appropriate license s from Microsoft b Content owners use Microsoft PlayReady content access technology to protect their intellectual property including copyrighted content This device uses PlayReady technology to access PlayReady protected content and or WMDRM protected content If the device fails to properly enforce restrictions on content usage content owners may require Microsoft to revoke the device s ability to consume PlayReady protected content Revocation should not affect unprotected
80. ists the accessible network devices to play back the contents in Media Player EU Media Player gt Using Media Player gt Network device software Update Accesses the specific website to update the TV s software if any updates are available 1 Display the menu with sth 2 Select Network gt Software Update with 4 W and press N to access 3 Follow the on screen instructions New Software Message selects whether to give a notification message when new software is found via network or not 1 Display the menu with WSNS 2 Select Network gt New Software Message with W and press N to access 3 Select On Off with A V and press K to set 114 Photos Selecting file Ensure the preparations of the media server network connections and network settings are completed Network gt DLNA gt Information N Network gt Network connections E Network gt Network settings 1 Display APPS List with NSS 2 Select Media Server with W lt gt and press to access 3 Select one of the media servers with W and press to access e For the operations to access another TV select the name of another TV from the displayed media server list To display hide information of the highlighted media server a 4 Select the file with Y and press JK to access e Depending on the condition of media server you may need to select the folder before selecting the file To display
81. ithin the current thumbnail are viewed 1 Select the file from the thumbnail of photos for the first view with 4 MW q D 2 Start Slideshow with Ml red and OM e To display hide the operation guide i e To pause return to Single view To return to thumbnail BACK RETURN e You can change the back ground music by setting Back Ground Music in Slideshow Settings see below 79 E Slideshow Settings Set up the settings for Photo mode 1 2 3 Display the option menu with 30X Select Slideshow Settings with OK Select one of the following items with 4 W and press N to access Frame Colour Effect Transition Effect Auto Makeup Screen Mode Burst Playback Interval Repeat Back Ground Music Set with A W lt gt and press to store Frame Off Multi Collage Drift calendar Drift Gallery calendar Gallery Cinema Selects the frame type of the slideshow Multi 9 photos are displayed orderly at once Collage Each photo is displayed at a random position and random scale Drift calendar Drift Photos are displayed with flow images e You can select whether to display the calendar or not The month of calendar is changed with lt E Gallery calendar Gallery Various sizes of photos in the frames are displayed e You can select whether to display the calendar or not The month of calendar is changed with lt E Cinema
82. itles 1 2 Selects the first and second preferred language for DVB subtitles depending on the broadcaster e To display subtitles LE Watching gt Basic gt Subtitle Preferred Teletext Selects the preferred language for DVB teletext service depending on the broadcaster 29 External equipment External connection These diagrams show our recommendations for connection of your TV to various pieces of equipment For other connections consult the instructions for each piece of equipment e For basic connection LON Watching gt Basic gt Basic connection e Check the terminal type and cable plugs are correct when connecting E HDMI equipment iin 1 HDMI terminal HDMI cable Recorder Player Set top box Camcorder Amplifier with speaker system Note e Use a fully wired HDMI compliant cable e For VIERA Link connections lt Functions gt VIERA Link HDAVI Control gt Summary of VIERA Link e Use HDMI2 for connecting an amplifier This connection is applicable when using an amplifier that has ARC Audio Return Channel function 30 E AV devices 1 AV2 COMPONENT terminals Component cables DVD Player 4 AV2 VIDEO terminals 5 Composite cables Camcorder Game equipment m USB devices 1 D 1 USB port USB cable Communication Camera Note e t is recommended to connect the device to the TV s USB port directly e Some
83. k for each broadcasters only available in some countries e For DVB C DVB T Service Replacement On Off set to On to display a message to switch to the available service only available in some countries e For DVB C Attenuator On Off sets the antenna system to use plural LNBs for receiving several satellites e If the DVB C signal is too strong the interference may occur In this case set to On to weaken the signal automatically Add TV Signal Adds the TV mode e This function is available if you skip any modes to tune in Auto Setup for first using the TV Jos Media Player Using Media Player Information Media Player allows you to enjoy photo video or music recorded on the USB Flash Memory network device Example Photo mode Still pictures recorded with digital cameras will be displayed Video mode Moving pictures recorded with digital video cameras and digital video data will be played back Music mode Digital music data will be played back e During the operation audio signal is output from DIGITAL AUDIO and HDMI2 ARC function terminals But no video signals are output To use HDMI2 with ARC function connect an amplifier that has ARC function and set to use theatre speakers CO Functions gt VIERA Link HDAVI Control e Date shows the date on which the recording was made by the recording equipment For a file without a valid record date is shown Pict
84. lead to fire or electrical shock 178 Information Using Help menu 1 Display the menu with WISN 2 Select Help with Y and press X to access 3 Select TV Self Test System Information Device Information with A WV and press JX to access TV Self Test Makes a diagnosis of picture or sound problems Follow the on screen instructions System Information Displays the system information of this TV Device Information Displays the device information of this TV 179 Optional accessories Communication Camera E Communication Camera TY CC20W This camera can be used in the video communication tool A Network gt Internet content gt Selecting internet content Depending on the area this optional accessory may not be available For details consult your local Panasonic dealer Wall hanging bracket E Wall hanging bracket Please contact your local Panasonic dealer to purchase the recommended wall hanging bracket Warning Using other wall hanging brackets or installing a wall hanging bracket by yourself have the risk of personal injury and product damage In order to maintain the unit s performance and safety be absolutely sure to ask your dealer or a licensed contractor to secure the wall hanging brackets Any damage caused by installing without a qualified installer will void your warranty Carefully read the instructions accompanying optional accessories and be
85. level to enhance or minimise lower deeper sound output LON Watching gt For best audio gt Basic settings Treble Adjusts level to enhance or minimise sharper higher sound output ON Watching gt For best audio gt Basic settings Equaliser Adjusts the frequency level to suit your favourite sound quality ON Watching gt For best audio gt Basic settings Balance Adjusts volume level of right and left speakers lt Watching gt For best audio gt Basic settings Surround On Off Provides a dynamic enhancer of width to simulate improved spatial effects I Watching gt For best audio gt Basic settings 156 Volume settings Speaker Setting TV Speaker Headphones Off Selects TV speakers or headphones for sound output Set to Off when using the external speakers I Watching gt For best audio gt Volume settings Headphone Volume Adjusts the volume of headphones LE Watching gt For best audio gt Volume settings Auto Gain Control On Off Automatically regulates large sound level differences between channels and inputs N Watching gt For best audio gt Volume settings Volume Correction Adjusts the volume of each individual channel or input mode I Watching gt For best audio gt Volume settings Speaker Distance to Wall Up to 30cm Over 30cm Compensates for the low frequency sound due to the distance between the speakers and the wall LE Watchin
86. lt gt and press X to set To set manually N Network gt Network settings gt Custom Wired Custom Wireless Ensure the connections are completed before starting network setup CE Network gt Network connections Display the menu with WISNU Select Network gt Network Connection gt Custom gt Wireless with A W lt gt and press to access e Confirm the encryption key settings and position of your access point before starting setup For details read the manual of the access point Select your desired access point with V and press to access e Available Wireless Networks are displayed automatically ke Encrypted access point e For WPS Push button 1 Press E red 2 Press the WPS button on the access point until the light flashes 3 Connect the TV with the access point with OKI WPS Wi Fi Protected Setup Ifthe connection has failed check the settings and positions of your access point And then follow the on screen instructions For WPS PIN 1 Press E green 2 Enter the PIN code to the access point 3 Connect the TV with the access point with 0K 106 For Manual 1 Press 4 yellow 2 You can set up SSID security type encryption type and encryption key manually 3 Follow the on screen instructions and set manually When you use 11n 5 GHz for the wireless system between the built in wireless LAN and access point select AES
87. menu with MENU 2 Select Setup gt Display Settings gt Smart Banner with A WY and press to access 599 lt 3 Select On Off with Y and press O to set Option Menu Confirm or change the current status 1 Display the option menu with GAON 2 Select one of the following items with WY and press X to access Voice Guidance Settings Multi Video Audio Type Multi Audio Dual Audio Sub Channel Subtitle Language Teletext Character Set Teletext Language MPX Volume Correction e The function items vary depending on the TV mode and country you select 3 Set with A W lt gt and press N to store Voice Guidance Settings Guidance settings for visually impaired users LON Watching gt For best audio gt Voice Guidance Settings Multi Video Selects from a group of multiple videos if available e This setting is not memorised and it will return to the default setting once you exit the current programme e For DVB Audio Type Set to Audio Description if the programme has Audio Description service then you will hear an additional audio track to describe events on screen if available e For DVB e To adjust the volume for Audio Description N Watching gt For best audio gt Audio Description Multi Audio Selects between alternative language or Audio Description for sound tracks if available e This setting is not memorised and it will return to the default se
88. moving down Random The transition effect is selected at random 116 Auto Makeup On Off Automatically detects the face in the photo and improves luminance and contrast Interval Long Normal Short Selects slideshow interval e Not valid when Transition Effect is set to Motion Repeat On Off Slideshow repeat Back Ground Music Off Type1 Type2 Type3 Type4 Typed Selects the background music during Photo mode 117 Videos Selecting file Ensure the preparations of the media server network connections and network settings are completed Network gt DLNA gt Information N Network gt Network connections E Network gt Network settings 1 Display APPS List with NSS 2 Select Media Server with W lt gt and press to access 3 Select one of the media servers with W and press to access e For the operations to access another TV select the name of another TV from the displayed media server list To display hide information of the highlighted media server E 4 Select the file with W and press N to access e Depending on the condition of media server you may need to select the folder before selecting the file To display hide information of the highlighted file E3 Note e Non playable files are also listed but cannot be selected Watching video E Playback If you have stopped the last playback halfway the confirmation scree
89. n is displayed to select whether to start from where you stopped last time or from the beginning e To operate playback A Manual skip if available Press to skip forward approx 30 seconds lt Rewind gt Fast forward W Stop Pause displays the time seek bar slow playback Playback 118 e To jump to the specified time point 1 Display the time seek bar with 8 2 While the time seek bar is displayed Press lt gt Search approx 10 seconds Press and hold lt gt Search rapidly 3 Jump to the specified time point with OX To play back slowly 1 Press and hold JK for 5 seconds Press lt gt search slowly 2 Return to the normal playback with 0X To display hide the operation guide and information banner E3 e To the previous content Ge red e To the next content E green e To change aspect 1 Display Aspect Selection with MSAA 2 Select the mode with WV and press to set Aspect1 Displays the content enlarged without distortion Aspect2 Displays the content full screen Original Displays the content original size You can also change the mode pressing AX Press repeatedly until you reach the desired mode Aspect cannot be changed depending on the content e To return to list BACK RETURN 119 Video Setup Set up the settings for video file operations on this TV 1 Display the option menu with GAON 2 Select Video Setup with WY and
90. n video signals CON Watching gt For best picture gt Option Settings e For AV input 3D COMB On Off Makes still or slow moving pictures more vivid LE Watching gt For best picture gt Option Settings e For PAL NTSC signal reception in TV mode or from composite connection 154 Screen Settings 16 9 Overscan On Off Selects the screen area displaying the image for 16 9 aspect LE Watching gt For best picture gt Screen Settings e Not valid in Network services H Size H Size1 H Size2 Switches the horizontal display range to reduce noise on the side edge of the image ON Watching gt For best picture gt Screen Settings e For TV mode AV and HDMI input Zoom Adjustments Adjusts the vertical position and size when aspect is set to Just Sidecut Just Zoom or Sidecut Zoom N Watching gt For best picture gt Screen Settings Screen Display On Off Turns the screen off when you select Off ON Watching gt For best picture gt Screen Settings Copy Adjustment Copies the selected True Cinema or Custom settings to those of the other input N Watching gt For best picture gt Copy Adjustment Reset to Defaults Resets the current Picture Viewing Mode to the default settings 155 Sound Mode Selects your favourite sound mode for each input Standard Music Speech User LU Watching gt For best audio gt Sound mode Basic settings Bass Adjusts
91. nd press N to access 3 Select On Off with A WY and press to set Ambient Sensor On Off e Automatic Brightness Control function Adjusts picture settings automatically depending on ambient lighting conditions _41 Aspect Change the aspect ratio image size with pH m To change the aspect ratio manually 1 Display Aspect Selection with ISARA 2 Select the mode with and press to set e You can also change the mode pressing MNAE Press repeatedly until you reach the desired mode Auto The best ratio is selected automatically according to the Aspect Control Signal O Watching gt For best picture gt Aspect Control Signal 16 9 Directly displays the image at 16 9 without distortion anamorphic 14 9 Displays the image at the standard 14 9 without distortion Just Displays a 4 3 image full screen Stretching is only noticeable at the left and right edges 4 3 Displays the image at the standard 4 3 without distortion Zoom Displays a 16 9 letterbox or 4 3 image without distortion 4 3 Full Displays a 4 3 image enlarged horizontally to fit the screen e For HD High definition signals Sidecut Just Displays a 16 9 letterbox anamorphic image full screen Stretching is only noticeable at the left and right edges e For HD High definition signals Sidecut Zoom Displays a 16 9 letterbox anamorphic image full screen without distortion e For HD High definition
92. nel using information banner Display information banner with FJ if it is not displayed Select a channel with WV and press to watch while the banner is displayed O Watching gt Basic gt Information banner To select a channel using TV Guide Display TV Guide with e16jiB Select the current programme with A Y lt gt and press to access The current programme is displayed on the top left of the screen Press OM to exit TV Guide CON Watching gt TV Guide gt Using TV Guide The postcode entry or update may be required depending on the country 19 you select Follow the on screen instructions E To watch pay TV e For information of the encrypted channels ON Functions gt Common Interface gt Using Common Interface e Consult the operator broadcaster or Cl module manufacturer for more information and conditions of the services Information banner Display information banner with f e Also appears when changing a channel Example Channel position and name Channel type Radio HDTV etc Encrypted channel r TV mode T T Programme Start time End time except Analogue Channel position etc Analogue Progress time indicator of the selected programme except Analogue 5 Category e To change the category DVB 1 Display the category list with E blue 2 Select the category with W and press to change l6 Current time Features available mes
93. nk is set to On and Power off Link is set to On Intelligent Auto Standby On Off Makes non watched or non used connected equipment go into Standby mode to reduce the power consumption O Functions gt VIERA Link HDAVI Control gt Intelligent Auto Standby e This function is available when VIERA Link is set to On 168 Data Service Application Service Auto Start On Auto Start Off Off Sets to use Hybrid Broadcast Broadband TV application e Not all the data services are available depending on the country area and broadcaster OON Functions gt Data Service Application gt Using Data Service Application e For DVB Store Cookie On Off Sets to store the information from a data service to the TV in order to access again quickly ON Functions gt Data Service Application gt Cookie Delete Cookie Deletes all the information from a data service LU Functions gt Data Service Application gt Cookie system Menu USB Keyboard Layout Selects the language that your USB Keyboard supports LE Functions gt Keyboard gt Keyboard Shipping Condition Resets all settings to the original condition CON Functions gt Shipping Condition gt Shipping Condition System Update Downloads new software to this TV OO Functions gt Updating the TV Software gt Auto update Licence Menu Displays the software licence information 169 Other Settings GUIDE Plus Settin
94. o codec H 264 BP MP HP MPEG1 MPEG2 MPEG4 SP ASP VC 1 Windows Media Video Ver 9 Audio codec AAC ADPCM Dolby Digital Dolby Digital Plus DTS core HE AAC LPCM MPEG Audio MP3 WMA WMA Pro some subtitles or chapter functions may not be available MP4 f4v m4v mp4 Video codec H 264 BP MP HP MPEG1 MPEG2 MPEG4 SP ASP Audio codec AAC Dolby Digital Dolby Digital Plus HE AAC MPEG Audio MP3 This TV supports this container recorded with Panasonic products For details read the manual of the products MKV mkv Video codec H 264 BP MP HP MPEG1 MPEG2 MPEG4 SP ASP Audio codec AAC Dolby Digital Dolby Digital Plus DTS core HE AAC MPEG Audio MP3 Vorbis some subtitles or chapter functions may not be available ASF asf wmv Video codec MPEG4 SP ASP VC 1 Windows Media Video Ver 9 Audio codec AAC Dolby Digital Dolby Digital Plus HE AAC LPCM MP3 WMA WMA Pro Copy protected files cannot be played back 92 FLV flv Video codec H 264 BP MP HP Audio codec AAC MP3 3GPP 3gp 3g2 Video codec H 264 BP MP HP MPEG4 SP ASP Audio codec AAC HE AAC PS mod mpg mpeg vob vro Video codec H 264 BP MP HP MPEG1 MPEG2 VC 1 Audio codec AAC Dolby Digital Dolby Digital Plus HE AAC LPCM MPEG Audio MP3 TS mts m2ts tp trp ts tts Video codec H 264 BP MP HP MPEG1 MPEG2 VC 1 Audio codec AAC Dolby Digital Dolby Digital Pl
95. o start Auto Setup Settings are made automatically e When the operation is completed the channel at the lowest position will be displayed 70 E Auto Setup using the buttons on the TV 1 2 Press and hold INPUT OK HOLD for MENU button for 3 seconds to display the menu Set Auto Setup with following control panel buttons e Move the cursor select from a range of options select the menu item up and down only aaf gt vy 4g e Access the menu store settings after adjustments have been made or options have been set with INPUT OK HOLD for MENU button Manual Tuning o_o Normally use Auto Setup or Update Channel List to retune DVB channels If tuning has not been done completely or for adjusting the direction of the aerial use this function DVB All DVB channels found will be added to Channel List DVB C Enter the frequency with NUMIA olola GHIBIGI ogag ogg E e Normally set Symbol Rate and Service ID to Auto Select Start scan with Y and press JK to search DVB T Select a channel with WY and adjust frequency with lt gt for each channel e Set where the level of Signal Quality becomes the maximum Press JK to search 71 E Analogue Set Analogue channel manually after Auto Setup Set Sound System and Colour System and then perform this function Normally set Colour System to Auto SC1 PAL B G H SECAM B G SC2 PAL SC3 PAL D
96. om APPS List 1 Display APPS List with NSS Example 2 Select an icon of the features with A W lt gt and press N to access Internet contents CE Network gt Internet content Media Player LE Media Player gt Using Media Player gt Selecting device mode Media Server U3 Network gt DLNA gt Using DLNA VIERA Link ON Functions gt VIERA Link HDAVI Control 14 Settings You can customise APPS List screen settings etc 1 Display APPS List with NSS 2 Select the icon for settings on APPS List with A W lt 1 gt and press to access 3 Follow the on screen instructions Note e Setup menu items may be changed without notice 15 Watching Basic Basic connection Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables E Aerial 1 Terrestrial cable terminal RF cable Terrestrial aerial Cable e For DVB C DVB T Analogue 16 m DVD Recorder VCR zm AA 6 5 1 Terrestrial cable terminal RF cable 3 DVD Recorder VCR Terrestrial aerial Cable 5 AV1 SCART terminal 6 SCART cable 1 E DVD Recorder VCR Set top box m LA 5 i a a PE ee 2 6 Er Ee E 7 d q J f i L d E i 1 HDMI terminal HDMI cable Set top box 4 Satellite dish 5 AV1 SCART terminal SCART cable Terrestrial cable term
97. ontents may not be played back properly E Wireless connection 1 1 Built in wireless LAN Rear of the TV Access point Internet environment E Wired connection 1 ETHERNET terminal LAN cable Shielded e Use the Shielded Twist Pair STP LAN cable Internet environment 101 DLNA connection To use DLNA features you need a home network environment and you can operate the features without a broadband network environment e To use internet service you need a broadband network environment U3 Network gt Network connections gt Internet connection E Wireless connection For DLNA and internet service 1 a gt p 5 1 Built in wireless LAN Rear of the TV Access point Hub or Router 4 Internet environment 5 Smartphone DLNA Certified media server PC etc 102 E Wired connection For DLNA and internet service aa eye 1 ETHERNET terminal LAN cable Shielded e Use the Shielded Twist Pair STP LAN cable Hub or Router 4 Internet environment 5 DLNA Certified media server PC etc E Wireless connection For DLNA 1 beste gece m TV e To use the TV as a wireless access point LU Network gt Network settings gt Custom Wireless Access Point DLNA Certified media server PC etc Smartphone 103 Note Ensure to use a LAN straight cable Set up and connect equipment required for the network environment
98. or easier identification and selection in TV Selection Input Selection or banner LE Watching gt External equipment gt Watching external input Banner Display Timeout 10 9 8 7 6 5 4 3 2 1 0 No display seconds Sets how long the information banner stays on screen LE Watching gt Basic gt Information banner Smart Banner On Off Displays the introduction banner for the internet service LON Watching gt Basic gt Information banner Radio Mode 20 15 10 5 Off seconds Sets the timer for turning off the screen automatically when a radio channel is selected LE Watching gt External equipment gt Energy saving functions 167 Common Interface Sets to watch encrypted channels etc U3 Functions gt Common Interface gt Using Common Interface VIERA Link Settings VIERA Link On Off Sets to use VIERA Link functions CON Functions gt VIERA Link HDAVI Control gt Preparations Power on Link On Off Sets to use Power on Link functions _ Functions gt VIERA Link HDAVI Control gt Power on Link Power off Link On Off Sets to use Power off Link functions OON Functions gt VIERA Link HDAVI Control gt Power off Link Standby Power Save On Off Controls the connected equipment to reduce power consumption in Standby lt Functions gt VIERA Link HDAVI Control gt Standby Power Save e This function is available when VIERA Li
99. otected files cannot be played back FLAC flac WMA WMA Pro wma e Copy protected files cannot be played back e WMA Lossless is not supported LPCM wav Note e Some files may not be played back even if they fulfil these conditions e Do not use multi byte characters or other special codes for file names e Connected devices may become unusable with this TV if the file or folder names are changed e Supported formats are different in Media Player and media server 129 Functions VIERA Link HDAVI Control Summary of VIERA Link Enjoy additional HDMI Inter Operability with Panasonic products which have HDAVI Control function VIERA Link HDAVI Control connects the TV and the equipment with VIERA Link function and enables easy control playback energy saving creating home theatre etc without complicated settings Connections to the equipment DIGA Recorder HD Video Camera Player theatre Amplifier etc with HDMI and SCART cables allow you to interface them automatically These features are limited to models incorporating HDAVI Control and VIERA Link e This TV supports HDAVI Control 5 function e Some functions are not available depending on the equipments version of HDAVI Control Confirm the connected equipment s version of HDAVI Control e VIERA Link HDAVI Control is a unique function that we have developed and added based on the control functions
100. ou can enter characters for free input items using MNAE Press repeatedly until you reach the desired character 11 8 82 2 lt P GLAM abc2ABC def3 DEF ghi4GHI jkKIBJKL mno6 MNO pars7PQRS tuv8TUV WXyYZ9WXYZ Space 0 aua NEUEKNA e The character is set automatically if you leave for 1 second e You can also set the character pressing or other MUGAV less than 1 second e he characters may vary depending on the input items 148 Keyboard Keyboard e Keyboards requiring the drivers are not supported e To change the language type set USB Keyboard Layout 1 Display the menu with WINO 2 Select Setup gt System Menu gt USB Keyboard Layout with W and press to access 3 Select the language with A W and press X to set e Characters may not be displayed correctly on the TV screen depending on the connected keyboard or the keyboard layout setting e Some of the keys of keyboards may correspond to the operation of the remote control C Esc 149 Settings Setting menu How to use Various menus allow you to make settings for the picture sound and other functions 1 Display the menu with WISNU e Displayed items vary depending on the input signal 2 Select the menu with W and press N to access Select the items with A Y and press JK to access e Only available items can be selected e You can also access from eHELP pr
101. peration Adding or reconnecting equipment Changing setup Easy playback Automatic input switching When the connected equipment is operating the input mode is switched automatically 2434 Power on Link set Power on Link to On in the Setup Menu to use this function When the connected equipment starts playback or direct navigator function menu for the equipment is activated the TV is automatically turned on Only when the TV is in Standby mode Power off Link Set Power off Link to On in the Setup Menu to use this function When the TV is set to Standby mode the connected equipment is also automatically set to Standby e This function will work even if the TV enters Standby mode automatically by auto power standby function otandby Power Save Set Standby Power Save to On in the Setup Menu to use this function The power consumption of the connected equipment in Standby mode is controlled higher or lower in synchronisation with the TV on off state to reduce the consumption When the TV is set to Standby mode the connected equipment is automatically set to Standby and the power consumption of the connected equipment is automatically minimised When the TV is turned on the connected equipment is still in Standby mode but the power consumption is increased to start the connected equipment fast e This function is effective if the connected equipment can change the power consumption in Standby mode and is
102. playback Ge red e To change the device 9 yellow e To change the contents E blue Playing music E Playback of the selected file in the folder 1 Select the folder with A WY lt gt and press to access 2 Select the file with A V lt E 3 Start playback with Mj red E Playback e To operate playback lt Rewind gt Fast forward W Stop Pause displays the time seek bar Playback 88 To jump to the specified time point 1 Display the time seek bar with 8 2 While the time seek bar is displayed Press lt gt Search approx 10 seconds Press and hold lt gt Search rapidly 3 Jump to the specified time point with 6M To display hide the operation guide E3 To the previous track Ge red To the next track E green To return to thumbnail BACK RETURN Music Setup Set up the setting for Music mode 1 This function is available in the thumbnail view Display the option menu with 301X 2 Select Music Setup gt Repeat with OK 3 Select Folder One Off with W and press N to set Folder Playback repeat within the selected folder One Playback repeat of the selected one file 89 Technical information Device handling caution Data modified with a PC may not be displayed Do not remove the device while the TV is accessing data Otherwise this can damage the device or TV Do not touch the pins on the device Do not subject the
103. ration guide Example BON gt e Before operating register this TV on the DIGA Recorder e For details read the manual of the DIGA Recorder 125 Technical information Photo format E Supported Photo formats JPEG jpg jpeg Sub sampling 4 4 4 4 2 2 4 2 0 Image resolution pixel 8 x 8 to 30 719 x 17 279 e DCF and EXIF standards e Progressive JPEG is not supported Note e Some files may not be played back even if they fulfil these conditions e Do not use multi byte characters or other special codes for file names e Connected devices may become unusable with this TV if the file or folder names are changed Video format E Supported Video formats AVI avi Video codec H 264 BP MP HP MPEG1 MPEG2 MPEG4 SP ASP VC 1 Windows Media Video Ver 9 Audio codec AAC ADPCM Dolby Digital Dolby Digital Plus DTS core HE AAC LPCM MPEG Audio MP3 WMA WMA Pro e Some subtitles or chapter functions may not be available 126 MP4 f4v m4v mp4 Video codec H 264 BP MP HP MPEG1 MPEG2 MPEG4 SP ASP Audio codec AAC Dolby Digital Dolby Digital Plus HE AAC MPEG Audio MP3 This TV supports this container recorded with Panasonic products For details read the manual of the products MKV mkv Video codec H 264 BP MP HP MPEG1 MPEG2 MPEG4 SP ASP Audio codec AAC Dolby Digital Dolby Digital Plus DTS core HE AAC MPEG Audio MP3 Vorbis some subtitle
104. s or chapter functions may not be available ASF asf wmv Video codec MPEG4 SP ASP VC 1 Windows Media Video Ver 9 Audio codec AAC Dolby Digital Dolby Digital Plus HE AAC LPCM MP3 WMA WMA Pro Copy protected files cannot be played back FLV flv Video codec H 264 BP MP HP Audio codec AAC MP3 3GPP 3gp 3g2 Video codec H 264 BP MP HP MPEG4 SP ASP Audio codec AAC HE AAC 127 PS mod mpg mpeg vob vro Video codec MPEG1 MPEG2 Audio codec Dolby Digital LPCM MPEG Audio TS mts m2ts tp trp ts tts Video codec H 264 BP MP HP MPEG1 MPEG2 Audio codec AAC Dolby Digital Dolby Digital Plus HE AAC MPEG Audio Supported Subtitles formats MicroDVD SubRip TMPlayer srt sub txt The video file and subtitles text file are inside the same folder and the file names are the same except for the file extensions lf there are more than one subtitles text files inside the same folder they are displayed in the following order of priority srt sub txt Note some files may not be played back even if they fulfil these conditions Do not use multi byte characters or other special codes for file names Connected devices may become unusable with this TV if the file or folder names are changed Supported formats are different in Media Player and media server 128 Music format E Supported Music formats MP3 mp3 AAC m4a Copy pr
105. sage meanings Bad signal Poor quality TV signal 20 Dolby D Dolby D HE AAC Dolby Digital Plus Dolby Digital or HE AAC audio track AD Audio Description service available e This function can aid visually impaired viewers by adding an additional audio track to describe events on screen CUN Watching gt For best audio gt Audio Description e Subtitle service available p Teletext service available Multiple audio available Multiple video available Multiple audio and video available Stereo Mono Audio mode Data service Hybrid Broadcast Broadband TV application available CON Functions gt Data Service Application gt Using Data Service Application 1 90 Off Timer remaining time C Watching gt Basic gt Off Timer To confirm another tuned channel ATIN To watch the channel listed in the banner Information on the next programme DVB gt 221 e To hide the banner EXIT e Extra information DVB E3 Press again to hide the banner e To adjust banner timeout set Banner Display Timeout 1 Display the menu with MEWY 2 Select Setup gt Display Settings gt Banner Display Timeout with A W and press JK to access 3 Set with A W and press to store e To change the colour type of on screen displays set OSD Colour LONI my Home Screen gt my Home Screen gt OSD Colour e To display the introduction banner for the internet service 1 Display the
106. se follow these simple guides to solve the problem If the problem still persists please contact your local Panasonic dealer for assistance No sound is produced e Is Sound mute active Press to switch sound mute on or off e Is the volume set to the minimum e Check connections and setting of external equipment ON Watching gt External equipment e Ensure that Speaker Selection is set to TV OON Functions gt VIERA Link HDAVI Control gt Speaker Selection e Ensure that Speaker Setting is set to TV Speaker O Watching gt For best audio gt Volume settings Sound level is low or sound is distorted e Sound signal reception may be poor e Set MPX in the Sound Menu to Mono Analogue ON Watching gt For best audio gt Advanced settings HDMI Before requesting service or assistance please follow these simple guides to solve the problem If the problem still persists please contact your local Panasonic dealer for assistance Sound is unusual e Set the sound setting of the connected equipment to 2ch L PCM e Check the HDMI Input setting in the Sound Menu O Watching gt For best audio gt Advanced settings e If digital sound connection has a problem select analogue sound connection LE Watching gt External equipment gt HDMI features 174 Pictures from external equipment are unusual when the equipment is connected via HDMI e Check the HDMI cable is connected properly N
107. select Selects the initial setting for audio tracks Auto Automatically selects the audio tracks if a programme has more than two tracks The priority is given in the following order Dolby Digital Plus HE AAC Dolby Digital MPEG Multichannel The priority is given to multi channel audio track Stereo The priority is given to stereo 2ch audio track MPEG The priority is given to MPEG e Dolby Digital Plus and Dolby Digital are the methods of coding digital signals developed by Dolby Laboratories Apart from stereo 2ch audio these signals can be multi channel audio e HE AAC is a perceptual coding method used to compress digital audio for efficient storage and transmission 57 e MPEG is an audio compression method that compresses audio to the smaller size without any considerable loss of audio quality e Dolby Digital Plus and HE AAC are the technologies for HD High definition programmes e For DVB SPDIF Selection Auto PCM Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 ARC function terminals e SPDIF is a standard audio transfer file format Auto Dolby Digital Plus Dolby Digital and HE AAC multi channel are output as Dolby Digital Bitstream MPEG is output as PCM DTS is output as DTS for video contents of Media Player Network services PCM Digital output signal is fixed to PCM e ARC Audio Return Channel is a function of digital audio outpu
108. selected 122 Playing music E Playback To operate playback lt Rewind gt Fast forward WZ Stop Pause displays the time seek bar Playback To jump to the specified time point 1 Display the time seek bar with 2 While the time seek bar is displayed Press lt gt Search approx 10 seconds Press and hold lt gt Search rapidly 3 Jump to the specified time point with 6M To display hide the operation guide E3 To the previous track Ge red To the next track E green To return to list BACK RETURN 123 Music Setup Set up the settings for music file operations on this TV 1 Display the option menu with ORAON 2 Select Music Setup gt Repeat with OM 3 Select Folder One Off with W and press X to set Folder Playback repeat within the selected folder One Playback repeat of the selected one file 2404s DIGA Recorder Controlling DIGA Recorder Ensure the preparations of the media server network connections and network settings are completed CU Network gt DLNA gt Information CU Network gt Network connections U3 Network gt Network settings Display APPS List with Ass Select Media Server with A W lt gt and press to access Select DIGA with 4 W and press N to access The screen of the DIGA Recorder will be displayed You can control the functions of the DIGA Recorder with this TV s remote control according to the ope
109. set to higher consumption e This function works when Power off Link is set to On Intelligent Auto Standby Set Intelligent Auto Standby to On in the Setup Menu to use this function When the TV is on non used connected equipment goes into Standby mode automatically to reduce the power consumption For example when the input mode is switched from HDMI or when Speaker Selection is changed to TV except for watching a disc e This function may not work properly depending on the connected equipment In this case set to Off 135 VIERA Link Control You can control some functions of the connected equipment with this TV s remote control by pointing at the TV s signal receiver 1 Display APPS List with NSS 2 Select VIERA Link with 4 W lt gt and press to access 3 Select VIERA Link Control with 4 WY and press to access 4 Select one of the following items with 4 W and press N to access Recorder Player Home Cinema Video Camera LUMIX Digital Camera Other The menu of the accessed equipment will be displayed The input mode will be changed automatically e The displayed item may vary depending on the connected equipment e Home Cinema means Player theatre Blu ray Disc theatre or Recorder theatre e Other means Tuner set top box 5 Follow the on screen instructions to operate the menu of the equipment e Confirm the remote control code is 73 CON Watching gt External
110. ss X to set e Auto Standby and No signal Power off are active when Eco Navigation is set to Set to Eco E Radio Mode Sets the timer for turning off the screen automatically when a radio channel is selected 1 Display the menu with WSNS 2 Select Setup gt Display Settings gt Radio Mode with A Y and press to access 3 Select the time with A Y and press JK to set 20 15 10 5 Off Seconds The sound is active even if the screen turns off This function is effective in reducing power consumption when listening to a radio channel Press any buttons except Standby On Off switch WAM uca eee D a and VSEE to turn the screen on Not valid in Analogue 28 Adjusting time Adjusts the time data 1 Display the menu with MSNU 2 Select Timer gt Time Zone with A W and press to access 3 Set with 4 W and press X to store e The time data will be corrected based on GMT Language 1 Display the menu with Wahu 2 Select Setup gt Language with V and press to access 3 Select one of the following items with 4 W and press to access OSD Language Preferred Audio 1 2 Preferred Subtitles 1 2 Preferred Teletext 4 Set with A lt gt and press X to store OSD Language Changes language for on screen displays Preferred Audio 1 2 Selects the first and second preferred language for DVB multi audio depending on the broadcaster Preferred Subt
111. st picture gt Basic settings Check all required cables and connections are firmly in place Blurry or distorted image no sound or low volume e Reset channels Watching gt Tuning and editing channels gt Auto Setup There may be red blue green and black spots on the screen e This is a characteristic of liquid crystal panels and is not a problem The liquid crystal panel is built with very high precision technology giving you fine picture details Occasionally a few non active pixels may appear on the screen as a fixed point of red green blue or black Please note this does not affect the performance of your LCD Digital TV Before requesting service or assistance please follow these simple guides to solve the problem If the problem still persists please contact your local Panasonic dealer for assistance Block noise frozen or disappearing image occurs Some channels cannot be tuned e Check the position direction and connection of the aerial e Check Signal Condition If Signal Quality is displayed in red the DVB signal is weak Connecting the aerial to the TV directly may improve signal quality than connecting the aerial through the equipment Set top box DVD etc O Watching gt Tuning and editing channels gt Signal Condition LON Watching gt Basic gt Basic connection 172 e Weather conditions will affect signal reception heavy rain snow etc in particular in poor reception are
112. store E Edit DVB favourites list You can edit the favourites list while the cursor is on the channel in the favourites list e To move the channel 1 Select the channel with Ay W 2 Press J green 3 Select the new position with A Y or SUERTE GI2IGI noe oJ 4 Press E green to store To delete the channel 1 Select the channel with A WV 2 Press K to delete Press 4 yellow to delete all channels To name the favourites 1 Press ij red 2 Enter characters maximum 10 characters with A W lt gt or EAAS and press OK to set ogg 45 6 EEIEIEE EE 3 Press 37AN RIUN to store 68 Channel List E Skip unwanted DVB Analogue channels You can hide skip unwanted channels The hidden channels cannot be displayed except in this function 1 Select Channel List with V and press JX to access 2 Select a channel with A W 3 Press OK to set Reveal Hide skip wj Reveal C1 Hide skip e To reveal all channels DVB Analogue 9 yellow e To sort channel names in alphabetical order DVB Ge red e To change the category DVB E blue E Edit DVB Analogue Channels e To swap move the channel position if available 1 Press J green to edit 2 Set the new position with A Y or MARAE and press Hi green to store GHIBIBI DOn E e To retune each channel Manual Tuning Ge red For Analogue ON Watching gt Tuning and editing
113. t and press to access e If only one device is connected this step will be skipped e The network device already connected to the TV is also displayed fi Enter User Password to access ta User Password are already entered 5 Select Photo Video Music with lt gt and press N to access Photo CTN Media Player gt Photo mode 75 Video LEM Media Player gt Video mode Music U3 Media Player gt Music mode 6 The thumbnail view will be displayed Example e To display hide information of the highlighted content E3 Note e You may also access each mode directly from APPS List CON my Home Screen gt APPS List gt How to use e Select the appropriate device and content for playing back each file e You can use the following buttons during playback Confirm the remote control code is 73 Lad Ced Od Oe ed Oe ad N Watching gt External equipment gt Operating with TV s remote control E To change the device You can change the current device to another device directly in the same mode when two or more available devices are connected 1 Display the device selection screen with I yellow while the thumbnail is displayed 2 Select the device with lt gt and press K to access m To change the mode You can switch to another mode of Media Player from the thumbnail view 1 Display the contents selection screen with E blue while the thumbnail is displayed 2
114. t connections e Use a fully wired HDMI compliant cable e Connect the equipment supporting VIERA Link to the TV s HDMI terminal via an HDMI cable Use a fully wired SCART cable e Use the optical digital audio cable or SCART cable for audio output from the TV 1 bi iiA 1 HDMI terminal DIGITAL AUDIO AV1 SCART terminal SCART cable DIGA Recorder with VIERA Link function 4 HDMI cable Optical digital audio cable SCART cable 5 HDMI cable Amplifier with VIERA Link function Speaker system Player theatre Blu ray Disc theatre with VIERA Link function 9 HD Video Camera LUMIX Camera with VIERA Link function If the connected equipment has HDAVI Control 5 function you do not have to use this audio cable Optical digital audio cable SCART cable In this case connect the equipment to the TV s HDMI2 terminal via an HDMI cable 132 E Available features HDMI and Audio out connections Player theatre e Easy playback e Power on Link e Power off Link e Intelligent Auto Standby e VIERA Link Control e Speaker Selection Blu ray Disc theatre e Easy playback e Power on Link e Power off Link Standby Power Save e Intelligent Auto Standby e VIERA Link Control e Speaker Selection Amplifier e Power off Link e Intelligent Auto Standby e Speaker Selection 1 For equipment which has HDAVI Control 2 or later function 2 For equipment which
115. t to On e No signal is received and no operation is performed for 10 minutes while No signal Power off is set to On E Auto Standby 1 Display the menu with MENU 2 Select Timer gt Auto Standby with A and press N to access 3 Select On Off with A W and press to set Auto Standby On Off Automatically turns the TV to Standby mode for energy saving when no operation is performed for 4 hours e Automatic input switching with the connected equipment affects this function and time count will be reset e The notification message will appear 3 minutes before going into Standby mode E No signal Power off 1 Display the menu with MEWY 2 Select Timer gt No signal Power off with A W and press to access 3 Select On Off with AA W and press N to set No signal Power off On Off Automatically turns the TV to Standby mode to prevent unnecessary power consumption when no signal is received and no operation is performed for 10 minutes e The notification message will appear 3 minutes before going into Standby mode 27 E Eco Navigation Automatically sets the TV to the most suitable energy saving mode The concerned items and their current settings are displayed Select Set to Eco to set them to the energy saving settings at once 1 Display the menu with WSNS 2 Select Setup gt Eco Navigation with A Y and press to access 3 Select Set to Eco with lt 1 gt and pre
116. t using HDMI cable e For DVB or video contents of Media Player Network services O Media Player gt Video mode gt Audio output settings CE Network gt Videos gt Audio output settings SPDIF Delay Adjusts the delay time of the sound output from DIGITAL AUDIO and HDMI2 ARC function terminals if the sound does not synchronise the image e For DVB HDMI Input Digital Analogue Selects to fit the input signal LE Watching gt External equipment gt HDMI features Digital When sound is carried via the HDMI cable connection Analogue When sound is not carried via the HDMI DVI adaptor cable connection e For HDMI input 58 TV Guide Using TV Guide TV Guide Electronic Programme Guide EPG provides an on screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days depending on the broadcasters 1 Display TV Selection with gi 2 Select the mode with WV and press s to set DVB C DVB T Analogue 3 Display TV Guide with AUDE e Press again to change the layout Landscape Portrait View Landscape to see several channels View Portrait to see one channel by time e Depending on the country you select you can select the type of TV Guide Default Guide 1 Display the menu with WENU 2 Select Setup gt Display Settings gt Default Guide with A W and press to access 3 Select Channel List TV Guide with A W and press to set
117. tatus 5 Select Exit with lt gt and press K to set Custom Wireless Access Point You can use the TV as a wireless access point and connect the network equipment without an access point e Confirm the PIN code network settings of the equipment before starting setup For details read the manual of the equipment 1 Display the menu with WSNS 2 Select Network gt Network Connection gt Custom gt Wireless Access Point with A Y lt j gt and press M to access 3 Select Connect to device in WPS with A W and press to access e To set manually select Change settings see below 4 Select and set WPS Push button WPS PIN with 4 W7 and press to access WPS Push button Set up the equipment for VWWPS Push button For details read the manual of the equipment WPS PIN Enter the PIN code of the equipment e If the connection has failed check the settings and positions of the equipment And then follow the on screen instructions E Change settings You can set up Network name SSID Encryption key Wireless type and Channel setting method manually Follow the on screen instructions and set manually e Set Reset settings to reset the items of Change settings Note e You cannot connect the internet service while the TV is set to Wireless Access Point e You can connect up to 7 devices But the transfer rate will vary according to communication environment or the numb
118. tings gt Network Status 7 Select Exit with lt gt and press to set 108 Custom Wired Ensure the connections are completed before starting network setup U3 Network gt Network connections 1 Display the menu with WisiNie 2 Select Network gt Network Connection gt Custom gt Wired with A W lt J gt and press JM to access 3 IP DNS Settings is displayed Acquire IP Address Acquire DNS Address e Auto is recommended e Available settings are displayed automatically e To set manually select and set IP Address Subnet Mask Default Gateway DNS Address Proxy Settings e It is not required for normal household use e Some internet services may not be available depending on the proxy settings Proxy This is the address of the relay server which is connected between the browser and the target server to send data to the browser 1 Select Proxy with 4 W and press N to access 2 Enter the address with A WY lt gt or NMEA elites and press M to set GI2IB J oga EEJEBIEN o 3 Press SyN GIN SRGINN to store Proxy Port This number is also specified by the provider with the proxy address 1 Select Proxy Port with A W 2 Enter the number with NUMEA olola ENJFEJEN 4 5 FeIERIED cH 3 Press SyN GIN SRGINN to store 109 4 Select Network Status with V and press JX to access T Network gt Network settings gt Network S
119. tion Auto Max Mid Min Off Reduces flicker noise in contoured parts of a picture and block noise e Not valid when 1080p Pixel Direct is set to On 89 42 50 inches model Advanced Settings You can adjust and set up the detailed picture settings when Viewing Mode is set to Cinema True Cinema or Custom The settings in True Cinema or Custom can be stored for each input N Watching gt For best picture gt Viewing Mode Select the input mode with JAY or IW Display the menu with MSNU Select Picture gt Viewing Mode with 4 WY and press to access Select the mode with V and press N to set ww YS Cinema True Cinema Custom E Adjust the detailed picture settings 1 Display the menu with Wau 2 Select Picture gt Advanced Settings with A W and press to access 3 Select one of the following items with WY and press to access Contrast Control White Balance Colour Management Gamma Reset to Defaults 4 Set with A lt gt and press X to store 46 E Contrast Control Contrast Control Auto Custom Off Automatically adjusts the detailed contrast settings Select Custom to set Contrast Control Setting manually Contrast Control Setting Adaptive Gamma Control Adjusts the gamma curve to make the image brighter Black Expander Gradually adjusts the shades of black Reset to Defaults Resets items of Contrast Control Setting E White Balance R G
120. tion is available when Mode is set to User e Select the frequency and change the frequency level using A W e To enhance the bass sound raise the level of the lower frequency To enhance the treble sound raise the level of the higher frequency e To reset the levels of each frequency to the default settings select Reset to Defaults with lt 1 gt and press OM e This function is effective only for the sound from TV speakers Balance Adjusts volume level of right and left speakers Surround On Off Provides a dynamic enhancer of width to simulate improved spatial effects e This function is effective only for the sound from TV speakers 2505 Volume settings 1 Display the menu with MEWY 2 Select Sound with WY and press X to access 3 Select one of the following items with 4 W and press to access Speaker Setting Headphone Volume Auto Gain Control Volume Correction Speaker Distance to Wall 4 Set with A W lt 1 gt and press X to store Speaker Setting TV Speaker Headphones Off Selects TV speakers or headphones for sound output Set to Off when using the external speakers Headphone Volume Adjusts the volume of headphones Auto Gain Control On Off Automatically regulates large sound level differences between channels and inputs Volume Correction Adjusts the volume of each individual channel or input mode Speaker Distance to Wall Up to 30cm O
121. tting once you exit the current programme e For DVB 493 Dual Audio Selects stereo monaural if available e For DVB Sub Channel selects the multifeed programme sub channel if available e For DVB Subtitle Language Selects the language for subtitles if available e For DVB Teletext Character Set Sets the teletext language font U3 Watching gt Teletext gt Teletext Character Set Teletext Language Selects between alternative languages for teletext if available e For DVB MPX Selects multiplex sound mode if available N Watching gt For best audio gt Advanced settings e For Analogue Volume Correction Adjusts the volume of each individual channel or input mode 24 Subtitle Display hide subtitles if available with Syma e To select the preferred language for DVB subtitles if available set Preferred Subtitles LE Watching gt Basic gt Language e To select the preferred subtitle type 1 Display the menu with WINO 2 Select Setup gt Display Settings gt Preferred Subtitle Type with A W and press X to access 3 Select Standard Hard of Hearing with A W and press N to set Hard of Hearing provides aids in understanding and enjoyment with DVB subtitles depending on the broadcaster e Preferred Subtitles 1 2 in Language are given priority CO Watching gt Basic gt Language Note e If you press in Analogue the TV switches to teletext
122. ures may not appear correctly on this TV depending on the recording equipment used Displaying may take some time when there are many files and folders Partially degraded files may be displayed with reduced resolution Picture setting may not work depending on the conditions Folder and file names may be different from those on the digital camera or digital video camera used 74 E To insert or remove the USB Flash Memory Ensure alignment is straight and complete when inserting or removing i e To remove the USB Flash Memory safely from the TV perform Safely remove USB in USB Device Setup 1 Display the menu with WINO 2 Select Setup gt USB Device Setup with W and press N to access 3 Select the device with and press yellow to set f Note e Check the terminal type and devices are correct when connecting e For the information of the devices OO Media Player gt Technical information e For supported file formats ON Media Player gt Technical information Selecting device mode 1 Insert the USB Flash Memory to the TV LE Media Player gt Using Media Player gt Information e To play back contents in the network device ensure the connection and settings are completed LU Media Player gt Using Media Player gt Network device 2 Display APPS List with Ass 3 Select Media Player with A W lt gt and press N to access 4 Select the device with lt g
123. us DTS core HE AAC MPEG Audio MP3 Supported Subtitles formats MicroDVD SubRip TMPlayer srt sub txt The video file and subtitles text file are inside the same folder and the file names are the same except for the file extensions lf there are more than one subtitles text files inside the same folder they are displayed in the following order of priority srt sub txt 93 Note e Some files may not be played back even if they fulfil these conditions e Do not use multi byte characters or other special codes for file names e Connected devices may become unusable with this TV if the file or folder names are changed e Supported formats are different in Media Player and media server Music format E Supported Music formats MP3 mp3 AAC m4a Copy protected files cannot be played back FLAC flac WMA WMA Pro wma e Copy protected files cannot be played back e WMA Lossless is not supported LPCM wav Note e Some files may not be played back even if they fulfil these conditions e Do not use multi byte characters or other special codes for file names e Connected devices may become unusable with this TV if the file or folder names are changed e Supported formats are different in Media Player and media server 94 Network Internet content Information You can access some specific websites supported by Panasonic and enjoy internet contents
124. ver 30cm Compensates for the low frequency sound due to the distance between the speakers and the wall e If the back space between the TV and wall is within 30 cm Up to 30cm is recommended e If the back space between the TV and wall is over 30 cm Over 30cm is recommended e This function is effective only for the sound from TV speakers 54 Voice Guidance Settings 1 Display the menu with MSY 2 Select Sound gt Voice Guidance Settings with W and press N to access 3 Select one of the following items with 4 W and press N to access Voice Guidance Speed Volume Language User Level Web Browser 4 Set with A W lt gt and press X to store Voice Guidance On Off Set to On to enable voice guidance of the basic features menu item on screen messages etc for visually impaired users Speed Fast Normal Slow Selects the readout speed for the voice guidance Volume Max Mid Min Selects the volume for the voice guidance Language Changes language for the voice guidance e All languages may not be available When the selected language is not supported Language is set to English automatically User Level Beginner Expert Selects the level of verbosity for the voice guidance Web Browser On Off Set to On to enable voice guidance of the network contents in web browser function 55 Audio Description 1 Display the menu with MSNU 2
125. with 4 W and press to access 3 Select Auto PCM with A W and press s to set SPDIF Selection Auto PCM Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 ARC function terminals e SPDIF is a standard audio transfer file format Auto Dolby Digital Plus Dolby Digital and HE AAC multi channel are output as Dolby Digital Bitstream MPEG is output as PCM DTS is output as DTS PCM Digital output signal is fixed to PCM e ARC Audio Return Channel is a function of digital audio output using HDMI cable 121 Music Selecting file Ensure the preparations of the media server network connections and network settings are completed Network gt DLNA gt Information N Network gt Network connections E Network gt Network settings 1 Display APPS List with NSS 2 Select Media Server with W lt gt and press to access 3 Select one of the media servers with WV and press to access e For the operations to access another TV select the name of another TV from the displayed media server list To display hide information of the highlighted media server E3 4 Select the file with Y and press JK to access e Depending on the condition of media server you may need to select the folder before selecting the file To display hide information of the highlighted file E3 Note e Non playable files are also listed but cannot be

TX-24AS500E TX-32AS500E TX-39AS500E TX

Contents

Download Pdf Manuals

Related Search

Related Contents