Home
User Manual
Contents
1. Subnet Mask and Administrator password the password of the device and then click OK button to save the settings NVMS1000 User Manual Edit device IP _ MAC Address IP Address Subnet Mask Port Administrator name A A A mace Administrator password LA d 4 4 Cancel 3 1 2 Manually Add Click Manually add menu to go to the window as shown below Add Device _ Quickly add Manually add Auto Report IP Domain Serial number Protocol New Device 0 0 0 0 Standard Device V 6036 admin Y There are three modes available for you to add device IP Address Domain name and Serial number You can add the device which supports NAT function through Serial number IP Address The IP address of the device Domain Name The domain name of the device Serial Number The MAC address of the device The MAC address is case insensitive Add Device Quickly add Manually add Auto Report Devic Protocol New Device IP Addressv 0 0 0 0 Standard Device V 6036 admin V ELLE IP Address Domain Serial Num O Input the Device Name IP Domain Serial number Port User Name and Password of the device NVMS1000 User Manual IM oe Select the Protocol and the area Click Test Link button to test the connection of the device Click L in the Delete column to delete the device Check Main Stream according to
2. Save Cancel Check Trigger Record and then drag the slider to set the sensitivity of the camera Click Defence Time to pop up the Schedule Setting window You can click System Schedule button in the window and then select a system schedule in the dropdown menu or set a new schedule for the motion alarm the settings are similar to that of the local record of device Please see the schedule setting of the local record of device for details gt Schedule Record Setting Click Schedule Record Setting to go to HRANE Cia ae the interface as shown on the right Select a ME ISTE camera and click Set Schedule to set the Camera Cameral 192 168 51 253 record schedule of the camera the settings are record TE similar to that of the local record of device MET Save Cancel Please see the schedule setting of the local record of device for details Set the record stream and then click Save button to save the settings gt Maintain System Ju al Maintain the storage server New 1 Click Maintain System to go to the interface as shown on the ri ght Maintain the system of storage server Click Reboot or Restore Defaults button and then click OK button in the popup Reboot dialog box to reboot or restore the device Click pee Import Configuration Upgrade or Export n a Import Configuration Configuration button and th
3. NV MS 1000 User Manual Contents OPW as A 1 E eiii m EE Nm l 1 2 Operator En VIOLA tasca i Lo C EC MM 2 Lo Install the SOI AA EEEa E aS aE 2 Lo Umnsllthe SOLOW All 6 costa sisi eer a iE aE rE EnEn 4 MOO ML SOLOW ALG APP o EEEE E EEEE 5 DM A m 5 PEE Ge COR Lane TSU iO en a seess E Seaton sue eqware EEE 6 Devre ENE AAA A 8 sA Py 1G ERN 8 Selle CUTTING E PP 9 a EA E 10 E Lo A 11 Dod EA DEVICE IOMA ON siendo 11 2 9 Area and Camera Management ansiosas lieic iendesiianeMusuadatieatiewsdeiise 16 oL APMM NETTE 17 332 Camera Mana Ce OC DERE DET 18 Storage Server Manace mentar ainia nido rinitis 24 iM BP m 24 4 2 Change or Delete the Information of Storage Server ccooooooononccnnnnnnnnonnnonnnncnnnnnnononanonnnnos 24 Group and SCM CIC COONS eE EE EE 32 De E AAA O II A 32 1 Create Editor Delete Camera TOD sevasacncvncsnssiesadeceaceecsoncesacexencnnsaenvedadavewsaneguenes 32 3 1 2 Addor Remove the Camera Grou Pessoa ireland vae oaa anna dando dicas 32 0 2 E AA RP E E E SUO OMM nU 33 eZ MANS CN A 33 5 2 2 Edit and Delete Group Dwell Scheme cccccoooononnnccnnnncnnnononocncnnnnnncnonononnnnnnnnnnnos 33 LAVO uu TTE EEEE TET 34 A 35 DLL Monon Port Pie Vie eeen E E 35 511 25 39099 E e e o e A E mice 35 A IN VPE 36 DAI Group Del Previo Wero ladies 36 022 Sheme Dwell ELTE T 36 VI presuntas 37 aca ae RI EE S 38 X O A PEE Po E E T 3
4. m System Permission Devic Jevice armissic Device Talk New Device2 DVR Devic Device Log View Devic New Device3 DVR NVMS1000 User Manual gt E map Permission Click E map Permission to go to the interface as shown on the right Add map permission for the selected user gt System Permission Click System Permission to go to the interface as shown on the right Select the system permission for the user gt Restore Default Permission n al ay Camera Permission 4 H H H E Device Permission x D A E map Permission E System Permission W Camera Permission W Device Permission E map Permission i m ud System Permission 2 XX district AX XX street OK Cancel System Permission System Permission Broadcast Search and Export of Local Log OK Cancel In the interface of User Management select a user and then click Restore Default Permissions to restore the default permission of the user gt Clear Permission In the interface of User Management select a user and then click Clear Permissions to clear the permissions of the user NVMS1000 User Manual 65 13 Basic Click Basic in the control panel to go to the interface as shown below System startup and maintenance backup and restore will be introduced in this chapter Partition and Path configuration have been introduced in the above chapter here we do not repeat again Partition and path Set Rec
5. to rotate the dome diagonally down left lt to rotate the dome towards left to rotate the dome diagonally up left to stop rotating the dome Drag the slider to adjust the rotate speed of the dome l Zoom button Click to zoom in camera image click y Zoom gt gt to zoom out camera image Focus button Click to increase the focal length click A e Focus A to decrease the focal length NVMS1000 User Manual Button Description Iris button Click to increase the iris of the dome click CB J ss 0 to decrease the iris of the dome Click it to start track Click it to enable automatic scan AN n now Pasta ao 14 3 Record Playback Click Playback on the left top of the interface to go to playback interface as shown below Live Preview Playback Device Management SE Monitory point lt Start time 2014 04 09 00 00 00 3 Record type Y Manually v Motion v Schedule v Sensor z 4 dvr 22 23 hk Camera 01 E EISE name me M111 181 mu M112 name mic M113 1234567890123 mu M114 name mu M116 name mic New Devicel_CAMERA mi New Devicel_CAMERA mic New Devicel_CAMERA mi New Devicel1_CAMERA EEH mx New Device CAMERA THH S le mx New oa CAMERA lt w ne w 8 ef lt Wa Monitory point mem Group Select the record start time record type and then click the device t
6. Click Overlap to make the alarm preview windows to overlap together You can drag each window to view respectively i dil O Preview 1 cy Preview 2 ca O Preview 3 2 a O v A Alarr Alarr MIELE A arr y a y d MES 11 20 2012 14 53 57 _ uL Alar i Alarm Source New Devicel_CAMERAO3Motion Detection Alarm Time 11 2 2012 2 55 19 PM New Devi B2 Sen sor 1 E ETTET TE ITT TET EO ES Clear All E Tiled New AP sorl 11 02 2012 yay gt TETTUUS TT TN ay Clear All E Overlap Naccanma Prar ARF Right click on the map to pop up a menu bar Click Full Screen to view the image in full screen Right click on the map and then click Exit Full Screen to exit NVMS1000 User Manual 11 Local Log Click Local Log in the control panel to go to the interface as shown below NVMS 1000 Control Panel Playback Main Type All Operation Log SystemLog Alarm Log B AR Log Maintenance Sub Type All Motion Detection Sensor Alarm Video Shelter Alarm Video Loss Alarm Playback PTZ Contro alk Login Logout Live Preview System Configuration Device Parameter Configuration Log Searct Device online offline Export SUN 2015 03 02 00 00 00 Ey A 2015 03 02 23 59 59 Ey inquire A root CA STA ETA Index Main Type Sub Type Time Content User Server Na Node Name p New Device3 name nem 1 OperationL Log Search 2015 03 02 11 46 07 Search log Oper
7. M111 181 mu M112 name mu M113 12345678901234 mu M114 name mu M116 name mi New Devicel_CAMERA mi New Devicel_CAMERA mi New Devicel_CAMERA mic New Devicel_CAMERA mic New Devicel_CAMERA mic New Devicel_CAMERA illt New Devicel_CAMERA mic New Devicel_CAMERA mic New Devicel_CAMERA mi New Devicel_ CAMERA mx New Devicel_CAMERA Y mu New Devicel CAMERA Ea Monitory point an Group tl Group Dwell 1 ye CIL MA HJ L THER SF 19 Hat gj C3 LO pie CELD EEB S le a 25 NVMS1000 User Manual The admin on the right top of the interface is the Change password username Click Logout to log out the system Click Change Password password to pop up the window as shown on the right Input mas the current password set a new password and then click OK Confirm password button to save the settings Click on the left side of the interface to hide the left panel click gt to show it Click one camera on the left panel to preview its image on the right side of the interface as shown below Live Preview Playback Device Management q MA Monitory point gt CAMERADI e dei22 23 m hk Camera 01 Ch WE name Gs M111 181 En M112 are Ge M113 123456 8901230 mn M114 sane ai Mi16_name E Now Dervicol_CAMERAS ili New Device CAMERA En Nen Devicel CAMERA New Device 1_ CAMERA ee ow e New Device CAMERA me Now Dovicel CAMERA Me New Device MERA me
8. and then click Install to start installing vcredist x86 click Finish to complete the installation Refer to the following pictures E Microsoft Visual C 2008 Redistributable Setup Welcome to Microsoft Visual C 2008 Redistributable Setup M gt Be sure to carefully read and understand all the rights and restrictions described in the This wizard will guide you through the installation process license terms You must accept the license terms before you can install the software MICROSOFT VISUAL C 2008 RUNTIME LIBRARIES X86 1464 AND X64 SERVICE 3 PACK 1 m These license terms are an agreement between Microsoft Corporation or based on where you live one of its affiliates and you Please read them They apply to the software named above which includes the media on which you received it if any The terms also apply to any Microsoft updates Press the Page Down key to see more text Select one of the options below Microsoft Visual C 2008 Redistributable has been successfully installed Itis highly recommended that you download and install the latest service packs and g security updates for this product Repair we a a Repair Microsoft Visual C 2008 Redistributable to its original state Product Support Center Uninstall Uninstall Microsoft Visual C 2008 Redistributable from this computer Note If vcredist x86 has been installed please click Repair and then click Next
9. 02 00 00 00 gv End Time 2015 03 02 23 59 59 gv Inquire root Index Main Type Sub Type Content User Server Na Node Name p New Device3 name Current page 0 0 All 0 First Page Previous Last Page items NVMS1000 User Manual 11 2 Log Maintenance In the local log interface click Log Maintenance button to go to the interface as X y Set the log maintenance shown on the right You can save the log e Log Expipry information for a certain time by configuration in this interface cis OK Cancel 11 3 Export In the local log interface click Export button and then set a storage path to export the log information NVMS1000 User Manual 0008 12 User Management Click User Management in the control panel to go to the interface as shown below There is only one super user registered by you when firstly log in the system You can add several users and set right for them through the function of Set Account Right NVMS 1000 memo Playback x Local Log f Control Panel Home Create Storage Server EM o ru JN Create Edit or Delete User Account and Permission Management View or Edit Sensor Settings Edit or Delete the Group a Please select user account from the list to edit delete or set permission Dwell Scheme Edit or Delete Device Area amp Camera Management Create a resource with the default permission Er Create Account Edit or Delete Camera Group Account Name Ac
10. Description Icon Description CIC fajm PTZ control Clicking the icon will display the control panel of PTZ 3D zoom only for dome Start stop talk NVMS1000 User Manual Right button functions Description Description Open Manual Recording Immediate Click it to set the immediate Start talk Start or stop talk Replay replay time PTZ Control a bay HH Control pandkai Choose stream to view Camera eee ee al i aea Enable Audio Enable or close audio Configuration and Camera configuration Close single channel preview Full Screen To display in full screen 6 1 Preview Snap picture Start manual record 6 1 1 Monitory Point Preview To start the live preview please drag the ERES cameras from the list to the right display window or select a window and then double click the camera to display the live image You can drag the 1mage to any window at random xs vean 03 28 2013 09 41 31 Amera C Node unfold rule After you set the device and area for the first time you shall obey the following rule to view all tree nodes When the 03 28 2013 09 41 31 tree node number is more than 64 the system PT ET will unfold the upper node by default For example A There is camera group AC under A sub area a under AC camera group ac AS under sub area a If the node number 1s more than 64 A will be unfolded and AC will be displayed but a will not be unfolded and ac will Snap not be displayed
11. If the node number of A is less ne n sf o x GQH tart Ta than 64 A will be folded and all nodes need to oe Main Stream be unfolded manually Sh dinem Camera Configuration 6 1 2 Stop Preview gt Close Preview of Channel Place your mouse on the window to display the menu toolbar and then click to close the preview of this channel NVMS1000 User Manual gt Close All Preview Click on the main menu toolbar to close all the windows gt Close Preview by Right clicking Choose Close Preview by right clicking the display window to close the preview of this channel Refer to the figure on the right 6 2 Dwell Preview After setting up group or scheme please refer to chapter 4 for creating group go to the live preview interface and then click Group or Scheme button on the left bottom of the interface to display the group list or scheme list 6 2 1 Group Dwell Preview gt Start Group Dwell Go to the live preview interface and then click Group button to display the group list Drag a group to any window icon stands for group The cameras of this group will be played one by one in the window according to the dwell time interval gt Stop Group Dwell Right click the display window to select Close Preview to close the preview of this channel or click on the main menu bar to close all windows for stopping group dwell 6 2 2 Scheme Dwell Preview gt Start Schem
12. Monitoring Settings of E map Warehouse Monitoring with E map gt Camera h Vi Map File Shortcuts WEE Addt map AddHot zone Add Hot spot Ra Rename Pi Delete Map User Name admin Web Port 80 RAM 29 1 2 2012 115145 AM A 10 2 1 Change or Delete Map In the above interface click Map File to show the map files on the left side Select a map and then click Rename to set a new name for it 10 2 2 Add Change and Delete Hotzone Add Hotzone Click Map File select a map and then click Add Hot zone to go to the interface as HARTA shown on the right O Check a map related to the hotzone Please click the color button to select Click B io select the text color displaying ME C LU Ea tata under the hotzone icon Click BB to select icons for the hotzone E After finishing adding the hotzone double click the hotzone icon to go to the map related to the hotzone NVMS1000 User Manual gt Modify and Delete Hotzone Right click a hotzone on the map and then click Modify Hot Zone or Delete the Hot Zone to change font color icon or name or delete it Modify Hot Zone Delete the Hot Zone 10 2 3 Add Change and Delete Hotspot In the E Map interface select a map and then click Add Hot spot to go to the interface as shown on the right ext Colo Please click the color button to select Check the associated cameras and sensors z Click
13. NVMS 1000 x Playback Live Preview J Bl Disk Man ager Plate number Capacity GB Status Source qN d 1 931 Normal Local Ada raid hange or delete raid Normal Local Normal Local Normal Local 2 3 4 Normal Local 5 6 Normal Local gt Normal Local Click View raid information to show the raid information on the right NVMS 1000 x Playback Live Preview Config storage server s disk info E Disk Manager RAID Level Status Stripe Depth Capacity GB The number of mem The number of hot s S V e RAID 5 Initializing 1024KB 21413 24 0 Add raid Change or delete raid Click Add raid button to pop up the following window Set the raid name raid level and stripe depth and then click OK to save the settings NVMS1000 User Manual lo hdd raid RAID 5 1024KB Click Delete raid to pop up the following window Select the RAID name and then click OK button to delete the RAID O Delete raid RAID Mame Click Expansion to pop up the following window Select the RAID name check the idle disk in the list and then click OK button to expand the RAID mn Expansion Click Make a dedicated hot spare to pop up the following window Select the RAID name check the idle disk in the list and then click OK button to set this disk as a dedicated hot spare RAID 0 cannot set its dedicated hot spare NVMS1000 User Manual O Mak
14. Now De 1 CAMERA lp New Device CAMERA me Now De 1 CAMERA an New Device CAMERA mn New Devicei CAMERA En New Device CAMERA e anii d putt me ptr te lt gt Ds v am Group Da Ph HIR fete s till Group Dwell y 4 3 16 r25 Wu nd There are some function buttons under the live 14 070 ee BEER Enn a 1 44 597 16 ELE Hat ER ca preview window as shown on the right J La LLLI O10 wl reo Button Description 6 Screen mode button More screen mode buttons will be shown by clicking it Close all previews Full Screen Click on the right side of the interface to show the right panel as shown below You can switch the interface between operation and PTZ panel by clicking or OMA The PTZ panel is shown below Click to hide the panel NVMS1000 User Manual gt PTZ gt Operation au 8 lt E r gt l d ag l Close i Snap E A FA zm PTZ con Magnify gt ww MA Focus 2 Ja O 5 19 Default m amp Audio Eh Operation Description Click it to enable audio and adjust the volume click it again to disable audio The operation panel is introduced as follows Button Description to rotate the dome upwards to rotate the dome diagonally up right gt to rotate the dome towards right to rotate the dome diagonally down right to rotate the dome downwards
15. The protocol baud rate and address of PTZ here must be consistent with the PTZ decoder NVMS1000 User Manual 6 7 2 PTZ control Return to the live preview interface after configuring parameter of PTZ Select the channel and then click e then choose PTZ Control to open the control panel of PTZ or right click the preview window and e Click the direction buttons to control its rotational direction drag the slider to control its speed e Click a and a buttons to adjust focus iris and zoom e Select a preset point and then click to operate this preset point or double click the preset point to operate it e Click Cruise button to list the cruises Select a cruise and click a button to cruise click A button to stop cruising PTZ can also support track HS Serial Preset Point Name preset001Tu Er preset002 preset003 preset004 preset005 preset006 preset00 7 auto scan wiper and light function 3D zoom In the live preview interface select a preview window of a dome and then click to enable 3D zoom Enable 3D zoom and then drag the mouse from left to right in the preview window to zoom in the selected image area drag the mouse from right to left to zoom out the image area Click to disable 3D zoom NVMS1000 User Manual a 7 Record Management NVMS1000 supports manual recording schedule recording motion detection recording and sensor alarm recording This chapter will introduce the above f
16. alarm preview and e map preview will pop up automatically Select the added camera and then click Remove Associated Preview Camera to remove the camera Add Associated Record Camera Click Add Associated Record Camera to go to the interface Check the associated cameras and then click OK button to save the setting When the sensor alarm is triggered the selected channels will be recorded automatically Select the added camera and then click Remove Associated Record Camera to remove the camera 9 2 Motion Detection Alarm Click Edit Camera Settings under Device in the control panel Select a camera and then click Area and Sensitivity to go to the interface as shown below You can adjust the detection sensitivity and set up the motion area ml e u Set the motion detection area of the camera Press Ctrl button and drag the mouse to select the area mdi I AP A y E 2 4 P e p p 2 ETATE p e t JA ba 1 Sari EA Sensitivity m d A S as ey 4 All Reverse Clear All Save Cancel NVMS1000 User Manual Click Set the Motion Alarm to go to the interface as shown on the right Enable Alarm Alarm Duration i Trigger Buzzer Trigger Alarm Output Trigger the Record Channel Big Screen Channel Null i Trigger Email Trigger PTZ Channel Channell Type No Trigger Number Copy to Save Cancel Click System Trigger to go to the interface Eee as shown on the right Trigg
17. and then select Tab View to embed the sub interface in the main interface 1024 x 768 9 4 3 Alarm Information You can unfold the alarm information list at the bottom of the NVMS1000 interface Refer to the below picture You can view the alarm time alarm source status and processing status in the alarm information list These alarm information can be deleted You can play the record of motion alarm Clear List Motion Alarm Sensor Alarm Alarm Time Alarm Source Status Play Record Delete Processing stat P User Name admin NVMS1000 User Manual 10 E Map Click E Map in the control panel to go to the interface as shown below O NVMS 1000 Control Panel Playback Live Preview Device ds Camera i Map File eM m Overla A Shortcuts i E p 10 1 Create map Click Shortcuts button on the left side of the E Map interface to show the shortcut menu Click Create Map File to go to the interface as shown on the right Import a map and set a name for it NVMS1000 User Manual 56 10 2 Modify or Delete Map Hotspot and Hotzone In the E Map interface click Edit E map on the left side to go to the interface as shown below NVMS 1000 Control Panel Playback Live Preview Device Control Panel Home Create Map File Elevator Conldor Test Department Test Room Internetional General R amp D Department Marketing Manager Department Department Room
18. back the local stored record files Record playback interface has two types synchronous and asynchronous Here we take the synchronous as an example NVMS 1000 CAMERAGS 1 OO gt lt Area Descriptions Area Description Description Resources Area Time search or type search Area Description Icon Description NVMS1000 User Manual Buttons Description of Area 2 Icon Description a Sa AF gn ye mode 1 4 9 16 25 channels IO ond You get more screen mode by clicking 4 Playback speed bar Playback by single frame When playback click W button firstly and then click this button to play frame by frame Record playback model Synchronous and synch asynchronous Playback source setup Right button functions rs E wh o sal gt Menu Description Menu Description 4 3 4 3 proportion 16 9 proportion Recover to the original Pull cercen Full screen mode Original Proportions proportion Snap picture Enable Audio Enable or close audio Download To download record by Close Channel Close single channel By Time time search preview To display in full screen Snap Full Screen NVMS1000 User Manual 46 8 1 Playback Set record date record type and the record playback source in the playback interface The way to set record playback source click M in on the toolbar of record playback interface choose the record playback source in the drop down menu A stand
19. list and then click Change button to change the address Click Delete to delete the selected receiver address Click Save button to save the settings gt DDNS Configuration Click DDNS Configuration to go to the interface as shown on the right Check Enable DDNS and then select the DDNS protocol type Take www meibu com as an example You should input the username and password Click Save button to save the settings gt Check Online Users Click Check Online Users to go to the interface as shown on the right All the online users will be displayed in the list 3 3 Area and Camera Management Receiver Information Receiver Email Address Add Change Delete Save Cancel Save Cancel B un e tan daviroa naniing ee _neck tne device o e user ini nati User Name IP Address admin 192 168 13 67 Click Edit Camera Settings under the Device in the control panel to go to the interface as shown below and then select a camera in the interface to show its camera settings NVMS1000 User Manual O m If the area is selected you can edit or delete this area or you can add or remove the cameras of this area If the camera is selected you can configure this camera EE Create Area EA Rename Remove Camera o Add Remove Camera IK Edit the Area of Camera root A Image Preview p New Devicel_name J p New Device2_name hghg Camera Settings a Image S
20. same time When playing record file in synchronous mode or asynchronous mode clicking EZS or EX will be useless unless you close all the playback windows 8 1 2 Playback Asynchronously Asynchronous Playback when playing some channels record at the same time each channel is independent from the others and each channel s playback time can be different Click to go to the asynchronous playback interface as shown below You can play the record according to the ways introduced in Section 8 1 NVMS1000 User Manual O NVMS 1000 04 09 2014 10 33 21 CEE Note Asynchronous mode 1f remote playback or all playback source is selected due to the remote channel number restriction of the device one device can only play back up to 4 channels record at the same time generally Synchronous mode if remote playback or all playback source is selected it has no restriction in the playback channel number of one device at the same time For example a 16 channels DVR can play back16 channels record at the same time 8 1 3 Playback by Setting Time Right click the color bar on the time scale 9 Manually set the time of channel 13 to pop up the Play time precise positioning of the channel X box Click the box to pop up a window as shown on the right Input time Wt rs manually or click button to set time The channel record will be played from the time you set PER Cancel 8 1 4 Playback by Searching Event
21. sd 66 130 Synchronize Time for NIulti DeVICeS ias 66 Web C nent a rais E PU MEI II 67 ICM A rts 67 TAFEL Chanpedthe Port ob Web Elentir aba ende cole 67 E A DA O tt seca he cae sel NI MR cie Eu Sce 67 IE NS WV PINE ET ET 67 14 1 4 The Download and Installation of PlUglns ooccccnccncnnnonnncnnnnnnnnononannnncnnnnnnnnnnnos 68 A Le CY e 68 AS Record Playback lio 71 14 4 Device Minas emen pidio 73 NVMS1000 User Manual Eoo 1 Software Introduction In this chapter you will read a detailed introduction of the operation environment install amp uninstall of this software 1 1 Summary Network Video Monitoring System hereinafter referred to as NVMS1000 is a monitoring clent which is specially designed for network video surveillance After the network video monitoring system is well built the super administrator can control the video input signal devices such as cameras domes etc to achieve live monitor video record and backup by configuring the video parameters and viewing the live in the control panel Users can choose the menu to control video surveillance system in the control panel The main functions of the control panel include live view playback E map device management group and scheme settings user account and permission local log basic configuration and alarm management 1 2 Operation Environment 1 Operating System Requirement System
22. the actual network situation Checking it or not will affect the record stream of live preview Click Add button to add the device 3 1 3 Auto Report Click Auto Report menu to go to the window as shown below Add Device Quickly add New Device Standard Device Standard Device Input the device name and then select the device protocol e If you want to add DVR please enter Network Sever tab of the DVR Check Enable input the IP address and port 2009 of NVMS1000 and then set the device number of the DVR e If you want to add IP camera please enter Network Configuration Server Configuration of the IP camera Check Do you want IPCamera to connect Server input the IP address and port of NVMS1000 and then set the device number of the IP camera Input the device number you set in the DVR or IP camera Select the device area and then click Add button to add device 3 2 Edit Device Information Select a device in the Add Edit or Delete Device interface and then click Delete button to delete the device Select a device and then click Edit button to go to the interface as shown below NVMS1000 User Manual MP Please select the item you need to edit Cameral 192 168 1 12 admin Click Edit Device Name to go to the interface as shown on the right Set a new device name and then click OK button to save the settings Click Edit Device Address to go to the interfa
23. the preset point Click o e PRESETOO9 c 99 Change Name Delete Save to save the settings Save Cancel NVMS1000 User Manual The definitions of the buttons are as below Buttons Description E3 to rotate the dome upwards amp to rotate the dome diagonally up left Kl to rotate the dome diagonally up right KA to rotate the dome downwards KA to rotate the dome diagonally down left to rotate the dome diagonally down right El to rotate the dome towards left EJ to rotate the dome towards right O to stop rotating the dome Focus button Click E to increase the focal length click El E to decrease the focal length Iris button Click Ell to increase the iris of the dome click El a Iris cla o to decrease the iris of the dome Zoom button Click E to zoom in the camera image click El to zoom out the camera image B em Click Cruise Line Configuration to go to ges t the interface as shown on the right You can ei ie porum 1 1 add change preview delete cruise Change Preview Delete Save Cancel Click PTZ Track Settings to go to the interface as shown on the right You can set the PTZ track gt Remove camera Select a camera in the Area and Camera Management interface and then click Remove Camera button to pop up a dialog window Click a Focus d La Iris ofe Zoom OK button to remove the camera Start recording Back NVMS10
24. then drag the mouse on the image to set the video block area Click Delete button to s delete all the video block areas Click Save E Aron T ucc NUS LJ button to save the settings Delete Click ROI Configuration to go to the interface as shown on the right Enable ROI configuration Set the level a greater level indicates the higher definition ROI areas Click Draw button and then drag the mouse on the image to set the ROI area Click Delete button to delete all the ROI areas Click Save button to save the settings Record Settings You can set the local record of device local record of system and the record of storage server Click Local Record of Device to go to the pmm Em interface as shown on the right Enable Choose pre recording time duration and Schedule Setup record save time Click Copy to button to Pre recording Time s 30 save the settings to the selected channel Record Duration s 30 Record Save Time d Never expiry Copy to i Save Cancel Click Local Record of System to go to the interface as shown on the right You can set schedule and record stream Cancel NVMS1000 User Manual 00020 How to set schedule The schedule setting between local record of device and local record of system is different Schedule Setting of Local Record of Device You should check the Enable in the Record of Device interface and then click Se
25. to save the settings Click Edit Time Configuration to go to the interface as shown on the right Set the date format time format and time zone of the device and check DST as required Synchronize the time of the device manually or by NTP server and then click Save to save the settings Manually Click Manual Input button to pop up a window and then manually input the time in the window You can also check Sync Time with PC to synchronize the time with PC Click Save button to save the settings By NTP Server Check Sync Time with MP Please enter a new password New Password Limited to 32 characters Confirm Password O Cancel Edit the upload bandwidth of the device Use the main stream OK Cancel a Set the basic information of the device Device Name Max Online Users Save Cancel an Configure the date and the time Date and Time Settings Date Format Year Month Day 24 Hour Time Format Time Zone GMT 08 Beijing Hong Kong Taipei Singapore Manual Input Sync Time with NTP Server NTP Server DST Settings DST Save Cancel NTP Server and then input the NTP server address Click View Device Log to go to the interface as shown on the right Select the log type set the start time and end time and then click Search button to search the log The searched log will be displayed in the list E View the
26. toolbar in the selected preview window or right click to pop Snap ec 99 up a menu bar Choose Start Talk to enable us E E bidirectional audio r A A d Immediate Replay Note Since NVMS1000 only allow hd PTZ Control me Main Stream opening one device s talk at the same time the Bee Sab Stres system will stop talk with the current device for PS Camera Configuration i A Enable Audio enabling new talk with another device which is Close Preview launching talk Full screen slo RESTO MO gt 6 6 2 Broadcast Click System on the 5m O Broadcast Mes 17 7 c menu bar of the software at ILL ca NN NK Switch User Please add or remove broadcast Add Device Please select the device yo the upper right and then A 9 Add Broadcast Device 2 choose Broadcast to go to Basic the interface as shown on Export Configuration Import Configuration the right Click Add Broadcast Device button to pop up a window and then check the devices you want to broadcast Click OK button to save the setting Click Start Broadcasting to start broadcasting 6 7 PTZ Control 6 7 1 Parameter Configuration of PTZ Please confirm the parameter of PTZ has been configured correctly before operating PTZ Click button in preview window or Edit Camera Setting under Device to go to the interface Click PTZ Setting to enable PTZ and set up protocol baud rate and address of PTZ Note
27. v Trigger Buzzer Trigger Alarm Output Trigger the Record Channel Big Screen Channel Null Trigger Email Trigger PTZ Channel Channell Type No Trigger Number Cancel Click System Trigger under Motion Hear Detection Alarm Settings to go to the interface as shown on the right Click Trigger the Record Channel to aae he Bio Creen Current big screen channel Null select channel The selected channel whose motion detection alarm is triggered will be Trigger the Record Channel Trigger to Play Audio File recorded automatically NNLLA 7 4 Sensor Alarm Recording Change Sensor Settings Click Edit Camera Settings under Device in the control panel to go to the interface areal New Devicel Sensor 1 Y New Devicel Sensor 2 Select a sensor and then click Alarm Link UN Daca Sense 3 New Devicel Sensor 4 Setup as shown on the right A arca NVMS1000 User Manual Click Add Associated Record Camera to choose associated record cameras When the INS m Add Associated Preview Camera E Camera Name Area sensor alarm is triggered the selected cameras will be recorded automatically Associate ord Camera Settings Re 73 Add Associated Record Camera ES Camera Name Area 7 5 Storage Server Recording mcum rer Click Edit Camera Settings under Device in the control panel to go to Area amp Camera Management interface as shown in Section 7 2 Select a camera an
28. 00 User Manual 000235 4 Storage Server Management NVMS1000 supports storage server management By using storage server you can store the images of the IP camera it will have no effect on record storage if you shut down the storage server 4 1 Create Storage Server Click View or Edit Storage Server Settings under Record and Playback in the 1 Croate storage sorer or select storage server from the list to edit or delete control panel to go to the Create Edit or 7 Device Name IP Address Domain Name Port Connect Status Delete Storage Server interface as shown on the right Before creating a new storage server you must confirm that the storage server and NVMS1000 are both in the same local area network Click Create Storage Server button to go to the interface as shown on the right The Sine ege viua ae Refresh NVMS1000 will search the available storage server in the same local area network Port MAC Address automatically If no storage server is searched for a long time please click Refresh button The default IP address username and password of storage server are as follows meee TI The default IP address 192 168 1 200 The default username admin The default password 123456 Please input the default IP address username and password 1f you use the storage server for the first time If you want to change the IP address username password and other information of the storage se
29. 8 042 nap ND E a E E E E E S 38 9 10 0 1 5 Record and Snap Palio id isa 38 6 5 MUN SCRE SI PEeVIe Wisin 38 0 01 Tikand DEOOUC IS eco ra quo bloc aio ibi 39 529 MEME cc 5 39 0O A a T naues dus 39 OE ELACONTO rcm 39 OcLl Parameter Contistration OC PI ehe a ges ha dnos 39 Ou WEZ COBDOI creat acs acres cs oe cence ee et See Ds 40 Record ADA uisi RR 41 IJ Manual RECON a mM PM DAMPNUM eee eens 4 ezo sschedBle ReCOFCIBIS oa 41 4 9 Motion D tection Recordtfig et ola nto iaa 42 4b SENSoOr data RECO Made 42 4o SOSE Server RECON Asc 43 EO SELRECOLA Parto it T I ici 43 Play DACK Manase merni A A E on E 44 Sl Pla Dani 46 Set Playback Synchronous y io ias 46 5 1 2 Playback Asynchronous y cstan dis 46 Bale Playback Dy setine FIIO isis 47 5 14 Playback by Searching ENE A oo eio mete xe eu Du prove 47 5 15 Playback BY Record PIA CE ati iio 47 52 nap When Playback osscar e E it 48 5 9 sChpand Backup ReCOTUzs duin ecse eto un sas 48 oL Clpand Backup RECO c uates ORI etant ates ato ao Putat tuse iab te ies 48 9 5 2 Backup Path Conhgurat OM sooo oec erede qute a das 48 4 Download Record By Time Search ooo en o rt eaten ux eid Ea eode gaes eve ke eod osa e OE E PONO 48 6 2 Download Record by Event Sears o odes espe lo Quod bs 49 8 6 View the Progress of Downloading ii a i 49 Alarm EIER 50 I SCO N AAA A te 50 92 Monon Detection Alar did daa e ina 51 93 NICO OS AA i
30. B io select the text color displaying ot Spot Name UNSIIBSNESIISAMERAUSEENS Limited to 1 60 characters under the hotspot icon lease edens a AD 3 Click Y to select an icon for the hotspot DUE SS Set a name for the hotspot ma There is another way to add hotspot New Device CAMERAQI Select a map and then double click the Ne sca camera or drag the camera to the map for e ee adding hotspot Sica New Devicel Sensor 4 Note The hotzones or hotspots will focus on the map in the same position after being added You should drag them to the corresponding positions on the map Click Save to save the settings 10 3 E map Monitoring Settings In the E Map interface click Monitoring Settings of E map on the left side to go to the Alarm Preview Window Automatic Pop up Settings interface as shown on the right Hot Spot Alarm Preview Check Automatic pop up alarm preview Automatic pop up alarm preview window window and then click OK button to save the setting If the configured hot spots raise the mo Cancel alarm the preview image will pop up automatically 10 4 E map Live Preview In the E Map interface click Monitoring with E map on the left side to go to the interface Note If the item Edit E map appears on the bottom of the menu bar in the E Map interface the current interface is monitoring with E map interface Double click a hotspot to go to its map NVMS1000 User Manu
31. Click button to display the event list Double click an event to play this event record Note By clicking the timeline you can choose a more accurate playback time You may also click and then select the speed in the popup bar amp M to change the playback speed 8 1 5 Playback by Record Player If your system has installed the previous version of NVMS1000 and you need to install the latest version a prompt which telling you that you need to back up the video data of the previous version will show if the previous version has not been uninstalled before you install the new version NVMS1000 User Manual 00048 0 After successfully backing up you should uninstall the previous version manually and then install the new version The shortcuts of NVMS1000 and the Record Player will show on the PC desktop if you successfully installed the new version The Record Player is used to play the record of v2 1 5 version and it 1s useful for v2 1 5 only If you uninstall the previous version before you back up the record data the Record Player will not show after you install the new version of NVMS1000 8 2 Snap When Playback Click button on the playback window to capture pictures A message prompt will pop up after snapping 8 3 Clip and Backup Record 8 3 1 Clip and Backup Record When playing back record file click button to set the start time click EA button to set the end time Click y button to download the
32. Management Choose an area in the above interface and then click Add or Remove the Sensor of Area button to go to the interface as shown on the right Check the sensor under the area on the right and then click button to remove the sensor Check the sensor on the left and then click button to add the sensor Choose a sensor and then click Edit Name button to change its name Click Edit the Area of Sensor button to change the area of sensor Choose a sensor and then click Set the Alarm Trigger button to go to the interface as shown on the right New Trigger Sound Playback Dev ice Camera Name 3_Sensorl associated record cameras Camera Name RAM 56 2 28 2015 4 51 39 PM MA areal A v1 New Device2 Sensor 3 New De New Device2 Sensor 1 OK Cancel 1 set the trigger sound play add or remove the associated preview camera and record camera v Trigger Sound Playback Associated Preview Camera Settings m Add Associated Preview Camera e Camera Name Area 3 Add Associated Record Camera a Camera Name Area Save Cancel NVMS1000 User Manual 00058 If checking Trigger Sound Playback there will be a sound like beep when sensor alarm is triggered Add Associated Preview Camera Click Add Associated Preview Camera to pop up a window Check cameras and then click OK button to save the setting When sensor alarm is triggered the
33. Recommendation Windows XP Windows XP professional version 32bit direct 9 0c Microsoft YaHei front need to be installed Windows 7 32b1t 64b1t support SP1 Direct 11 0 or above Windows 8 32b1t 64b1t Direct 11 0 or above 2 Hardware Requirement Item Recommendation Intel Core Dou 2 6GHz or higher 250GB or above Graphics Card Independent graphics card 512M graphics memory or higher 3 When running NVMS1000 you need to ensure that all the running antivirus software and firewall are closed so that the program of the NVMS1000 can be installed NVMS1000 User Manual 1 3 Install and Uninstall 1 3 1 Install the Software Double click setup exe to go to the NVMS1000Installation Wizard installation wizard Click Next to continue Welcome to setup NYMS 1000 1000 installer this setup will be installed N YMS 1000 in pour computer Cancel Select I accept the terms of the license wmsoooinstalation wizara License Agreement agreement and then click Next to continue Software Installation Licensing Agreement 1 This software shall be protected by copyright law the PAC and international copyright treaties and other intellectual property laws and treaties 2 All ownership and intellectual property rights of this softwarefincluding but not limited to any images pictures cartoons record music letters and additional program dll exe etc attached help fil
34. Report The operations are similar to that of the NVMS1000 main program Live Preview Playback Device Management Hum oo oce mel Device Management Search Device Ey Index Device Name Device Type Channel Count Alarm In Count Alarm Out Count IP Domain Port Device Number Edit Delete 1 New Device001 ONVIF 0 0 0 192 168 122 36 80 4 uy 2 New Device002 IPC 0 0 0 192 168 12 19 9008 1 3 New Device003 IPC 1 1 1 192 168 12 158 9008 4 u 4 New Device004 IPC 0 0 0 192 168 10 5 9008 4 OT 5 New Device005 IPC 1 1 1 192 168 12 89 9008 4 TT 6 New Device006 IPC 0 0 0 192 168 10 3 9008 El uj 7 New Device007 IPC 0 0 0 192 168 10 16 9008 4 wi 8 New Device008 IPC 0 0 0 192 168 10 4 9008 4 w 9 New Device009 IPC 1 1 1 192 168 12 160 9008 4 T 10 New Device010 IPC 1 1 1 192 168 12 199 9008 4 QT Pagei jof4 M 10 view1 10 of 33
35. To add or remove the sensor of the area to set up alarm trigger and modify the area of the sensor Basic To setup record partition and path system startup and maintenance amp backup and restoration Local Log To search view and backup local log Descriptions of Other Buttons Button Description Click it to hide the interface Click it to zoom in out the interface Click it to extend or shrink the window eg Extend or shrink the alarm information list ES Click it to exit NVMS 1000 3 Device Management Click in the control panel to go to the device management interface as shown below In the interface you can view the device type IP address domain name online status disk status record status and alarm status of all the added devices E Add Device E Device Name IP Address Domain Na Online state Disk state Rec state Alarm state New Device001 192 168 122 36 A e New Device002 192 168 12 19 w Device003 192 168 12 158 ew Device004 192 168 10 5 w Device005 192 168 12 89 lew Device006 i 192 168 10 3 n Device007 192 168 10 16 lew Device008 192 168 10 4 v Device009 192 168 12 160 lew Device010 192 168 12 199 ew Device011 192 168 10 7 v Device012 192 168 122 110 Click disk status icon A to view the disk abnormal records of the device click 3 to view the video records click A to view the alarm records and then click the unprocessed alarm record to process it Right click a titl
36. al I NN The icon of the hotspot will become a flashing light if this hotspot raises the alarm What s more there will be preview windows on the right side if you had checked Automatic pop up alarm preview window Click the alarm preview image to go to the map whose hotspot raises the alarm NVMS 1000 Control Panel Live Preview um x teut Control Panel Home Create Map File Snap Open Manual Recording Start Talk PTZ Control Conference on s i INES 6 Corridor New Device2_ MER AO New De Domestic Marketing Department Zoom In 4 n Size of Window VICE 1 D1 25fps m Y 2CIF6fps Enable Audio Conference Conferenq Room Room Close Preview New De del Se sor 3 E ES Perchasing P eE PIER cias dra as B d Coridor 7 New Device f Intemetional Financial Marketing Monitoring Settings of E map R amp D Department D epartment Department Edit E map a joe A m o Camera Ta Map File Dir j Shortcut Area Description Area Description Zoom in out the map a Overall display of map suppressible Alarm message prompts Right Click on the Alarm Preview Window Item Description Item Description Recording control panel Enable Audio Enable audio Stop preview of single channel NVMS1000 User Manual 0008 Click Clear All to clear all the alarms
37. amera3 04 09 2014 11 06 55 Camera4 04 09 2014 11 07 05 Camera5 04 09 2014 11 06 55 New Device3 04 09 2014 11 06 55 Synchronize Back NVMS1000 User Manual OT 14 Web Client Login You can login NVMS1000 by web client The default port number is 80 In web client you can do live preview and record playback and so on The browsers which web client supports are IE7 IES IE9 IEIO IE11 firefox google and opera Here we take IE11 as an example 14 1 Login You can login the web client through LAN or WAN 14 1 1 Change the Port of Web Client A popup window will be shown if you start NVMS1000 when port 80 is being used Refer to the below left figure Click Yes button to change the web port Refer to the below right figure You can go to Basic 2 Edit Port interface to change the port NVMS 1000 Modify Web Port x The port of web is occupied reset it or not 14 1 2 LAN Login If you login NVMS1000 via LAN you need to input the LAN IP address of the PC If the web port is not 80 you need to input the LAN IP address plus port number in the address bar as shown below QO 0 http 127 0 0 1 90 E pro NVMS 1000 14 1 3 WAN Login Port mapping needs to be done if you log in NVMS1000 via WAN Please refer to the following steps Obtain the LAN IP address of the PC 2 Log into the management interface of the router by browser Forward the LAN IP address and port to the router Port mapping settings
38. ation L System Conf 2015 03 02 11 15 28 E map configuration sav Operation L System Conf 2015 03 02 10 41 09 E map configuration sav Operation L System Conf 2015 03 02 10 40 52 E map configuration sav Operation L System Conf 2015 03 02 10 33 49 E map configuration sav Operation L System Conf 2015 03 02 10 30 46 E map configuration sav Operation L System Conf 2015 03 02 10 29 45 E map configuration sav Pb ph pp pp po po popa System Log Login Logou 2015 03 02 09 55 52 Successfully login Current page 1 1 All 8 First Page Previous Last Page items 11 1 Search log Select main type and sub type set the start time and end time and then click Inquire button to search the relevant log information Click First Page Previous Next and Last Page to view the information on different pages For example if you want to view the online offline information of storage server you should select Device online offline under Sub Type in the above interface Click Inquire to view the online offline information of storage server y Start View Sys NVMS 1000 Control Panel Playback Main Type All Operation Log SystemLog Alarm Log Log Maintenance Live Preview System Configuration Device Parameter Configuration Log Search Device online offline Export Sub Type Al Motion Detection Sensor Alarm Video Shelter Alarm Video Loss Alarm Playback PTZ Contro Talk Login Logout SEI 2015 03
39. ce as shown on the right Input the new IP address or domain if you check Domain Click OK button to save the settings Click Edit Device Port Number to go to the interface as shown on the right Input the new port number and then click OK button to save the settings Click Edit Device User Name to go to the interface as shown on the right Input the new username and then click OK button to save the settings MP Please enter a new device name which will use as the new identity of the device New Name Camera3 Limited to 1 60 characters OK Cancel im Please enter a new IP address IP Address Domain OK Cancel MP Please enter a new port number It will be unable to log in to the device if the port number is incorrect New Port Number 6036 Limited to 10 65535 OK Cancel Please enter a new user name New Account Name admin Limited to 1 60 characters OK Cancel NVMS1000 User Manual Click Edit Device Password to go to the interface as shown on the right Set the new password and then click OK button to save the settings Click Edit Connection Bandwidth to go to the interface as shown on the right Check Use the main stream as required Checking it or not will affect the record stream of live preview Click Edit Basic Configuration to go to the interface as shown on the right Set the device name and then click Save button
40. cel 4 me Q Record Search User Name 1 8 5 Download Record by Event Search Click button to show event information list Choose an event and then right click it to download this event record 8 6 View the Progress of Downloading Move the mouse to the toolbar at the bottom of the interface for download progress viewing Refer to the figure as shown below You can also manually stop downloading T5 E Serial N Start Time End Time Had Downloaded Had TakeTime 1 3 29 2013 12 00 00 AM 3 29 2013 11 59 59 PM 68 11 00 00 04 The number of backup 1 User Name 1 A popup window will show if you exit the RSS software when a backup task is going Refer to Has downloading task of backup it will be clear if exit the program the figure on the right Are you sure to exit the program NVMS1000 User Manual 9 Alarm Management 9 1 Sensor Alarm Click Alarm Management in the control panel to go to the interface as shown below NVMS 1000 A Live Preview Playback ft Control Panel Home Create Area Edit E map sensors of the area or edit the settings of sensor alarm trigger RA EditName O SettheAlarmTrigger T Edit the Area of Sensor root New Device3_Sensor1 New Device3 Sensor2 New Device3 Sensor3 New Device3 Sensor4 New Device3 Sensor5 New Device3 Sensor6 New Device3 Sensor7 Edit or Delete Camera Group View or Edit Device Settings Area amp Camera
41. ck Save to save the settings GMT 08 Beijing Hong Kong Shanghai The time setting of storage server is the E same with that of the device Please see 3 2 Edit Device Information for details Save Cancel gt Alarm Record Setting Click Alarm Record Setting to go to the following interface Select the camera first and then check Enable Motion Detection Select Add press Ctrl button and then drag the mouse on the image area to select the motion area Select Erase press Ctrl button and then drag the mouse on the selected motion area to clear the motion area Click All to set the whole image area as the motion area click Reverse to swap the selected motion area and the unselected area click Clear All to clear all the selected motion area NVMS1000 User Manual Change the motion detection record info of the storage server 212 LI Config storage server s motion detection record info Press Ctrl button and drag the mouse to select the area Camera 0 0 0 5 CAME mE SZAGRRERES X6ZSIMEIERENN AMNES ITAM E NEW VCI Lo ed un ud NE iP 8G ih 7 ae xis M E I a de Z E mu Enable Motion Detection e A a x T m i x 2 5 P 4 E v UNE ic iir aim R te im Al Trigger Record AAA A Defence Time ha o NAZE O SEG ERA O TE Sensitivity or ea IN S Ne mt A 4 m m Revers Clear A
42. count Type Telephone Account Description 1 Super Admin Name Type Permissio Edit or Delete Schedule View or Edit Storage Server Settings Set Record Partition 12 1 Create a Resource with the Default Permission In the above interface Create a resource with the default permission means that permission of new resources will be given to all the users if you are going to create new resources 12 2 Create Change and Delete Users gt Create Account In the interface of User Management click am Create Account to go to the interface as p LI shown on the right Input account name and New Account Name Limited o 1 60 characters password Set account type and the default TE aquse permission SR You can bind the account by e mail or ids ment telephone and add description to the account Telephon Limited to 15 characters Account Description Limited to 255 characters OK Cancel Notes e Two types of user administrator and operator Administrator enjoys all the system permissions except account and permission management Operator only enjoy the permissions of broadcast searching and exporting log e If you have checked Default Permission under initial permission when creating new account all the resource permissions and system permissions will be added for the user NVMS1000 User Manual In the interface of User Management select a user and then click Edit button to go to the interface as shown on t
43. d then click Record of Storage Server under Record Settings to go to the interface as shown below Set video recording configuration of the camera New Device2 name for storage server o Set video recording configuration of camera Such as storage server code stream and schedule etc a Record of Storage J Ni z 3 Storage Server Record Set Schedule Record Stream 1 1080P 25fps 04 09 2014 15 18 53 Save Cancel Select the storage server and then set up the record schedule Please refer to section 3 3 2 for details Set the record stream and then click Save button to save the settings 7 6 Set Record Partition As the new video data getting more and more till it takes up all the partition space to write data circularly the new data will overwrite the old data If you do not want the old data to be overwritten you should change the record partition of the new data Click Set Record Partition under Playback in the control panel to go to the interface as shown below Choose a partition for storing record Set the Partition of the System Record du Please select the partition of the system record The available space of the iore than 2GB g E Partition Symbol Partition Size Remaining Space C 37 6G 24 9G 58 6G 44 2G D 58 66 30 9G 78 1G 68 7G OK Cancel NVMS1000 User Manual 04 8 Playback Management Click Playback in the control panel to go to the interface You can play
44. domain of the storage server Click OK to save the settings Click Change Storage Server Port to go to the interface as shown on the right Set the new port and then click OK to save the settings Click Change Storage Server Username to go to the interface as shown on the right Set the new username of the storage server and then click OK to save the settings Click Change Storage Server Password to go to the interface as shown on the right Set the new password of the storage server and then click OK to save the settings Click Basic Information to go to the interface as shown on the right Set the new device name and then click Save button to save the settings You can view the basic information of the storage server in the interface Please input a new port number It will be unable to log in to the storage New Port Number 6063 Limited to 10 65535 OK Cancel EP IDC S SUB TITLE CHANGE STORAGE SERVER USER NAME New Account Name admin Please input new user name New Password Confirm Password E Look up storage server s basic info Device Name N9 Number of Alarm Input Number of Alarm Output Kernal Version arrears Y P a Hardware Versior Software Version Limited t Limited to mm Save server if the port number is incorrect o 1 60 characters Cancel 32 characters Cancel Cancel NVMS1000 User Manual Click Network Setti
45. e Dwell Go to the live preview interface and then click Scheme button to display the scheme list Drag a scheme to any window icon stands for scheme The screen mode will be distributed automatically according to the number of the cameras in the group Note To achieve dwell between devices you should set device as a unit when adding group and then add all the groups into one scheme to dwell O NVMS 1000 O NVMS 1000 03 28 2013 1609 38 a 03 28 2013 16 09 38 cr BB NVMS1000 User Manual gt Stop Scheme Dwell Click to close all the windows for stopping scheme dwell 6 3 Preview Control gt Full Screen Click ES button on the live preview interface or right click on any preview window and then click Full Screen to view in full screen Right click on the full screen interface and then click Exit Full Screen to exit full screen gt Single Channel Displaying Double click the selected window to view in single channel mode Double click the window again to recover the window gt Stream of Live Preview Right click on the preview window to CAMERA SN choose recording stream as shown on the right Has El Live preview adopts stream self adaptive rule Ys 3 ia Y 3a Modify Device Stream Click a button B T e Open Manual Recording Immediate Replay on the preview window to enter the Area and Mn Camera Management interface Click Image PTZ Control Quality under Image S
46. e a dedicated hot spare 5 RAID 5 ip RAID 0 can not create a dedicated 1024KB Click Make a global hot spare to pop up the following window Check the idle disk in the list and then click OK button Click Yes in the popup dialog box to set the disk as a global hot spare O Set global hot spare disk NVMS 1000 gt Make sure set global hot spare disk ap Click Make an idle spare to pop up the following window Check the hot spare disk in the list and then click OK button Click Yes in the popup dialog box to set the disk as an idle disk Set idle disk NVMS 1000 2 Make sure set to idle disk mu NVMS1000 User Manual gt User Manager Click User Manager to go to the interface as shown on the right You can view all the users of the storage server in the list User Name User Type admin Super Admin Click a user in the list and then click STE Change button to pop up the window as shown on the right You can modify the password of the user Input the new password twice and then click OK button to save the settings Cancel gt Time Setting Click Time Setting to go to the interface as shown on the right Set the date format time format and time zone of the storage server and check DST as required Synchronize the time Year Month Day of the storage server manually or by NTP server 24 Hour and then cli
47. e bar of the device list to pop up a menu list You can check the menus in the list to show other device information including Number of Camera Number of Alarm Input Number of Alarm Output Device Number and Port 3 1 Add Device Click Add Device button in the above interface to pop up the following window The NVMS1000 system will automatically search the online device in the same local area network You may click Manually Add to add third party devices NVMS1000 User Manual Add Device Click Version Device Identifier or m title bar to shown icon or Ed The sequence of the device in the list will be changed by clicking or El 3 1 1 Quickly Add In the above interface click the Refresh button on the top right corner to quickly refresh the online device in the same local area network Check the searched devices select the area on the down left corner and then click Add to add the device If you want to create a new area please see 3 3 1 Area Management for details Filter IPAddress e Click on the IP Address title bar e Check Filter condition input the Start IP address and End IP address and then click OK button to save the settings The device list will filter the devices according to your settings gt Edit IP Address Click EA to edit the IP address of the device Refer to the following figure Input the IP Address
48. e value is the more Sensitivity Add Erase Clear Ar sensitive it 1s Click Add Erase and then hold press Ctrl and left click mouse to add delete the area you want Click All Reverse Clear All button to select area or clear all the area quickly BEF sai A DA cos ul ee Em ARNE ME ANA ede F mente APR ASRERN CHATEAR Click Set The Motion Alarm to go to the interface as shown on the right You can set the EA ce w Enable Alarm motion alarm and linkage configuration Holding Time S 3 Buzzer Note Please refer to the user manual of Trigger Alarm Output the device for device linkage configuration A e Trigger the Record Channel Big Screen Channel Null Email Trigger PTZ Channel Channell Type No Trigger Number Copy to Click System Trigger to go to the interface BEE as shown on the right Check Trigger to Play Audio File If the motion alarm of a certain channel is triggered a Trigger the Big Screen Current big screen channel Null gt sound like beep will give out OTTO Trigger the Record Channel Save Cancel Trigger to Play Audio File Click Trigger the Big Screen button to select channel If the motion alarm of the selected channel is triggered a big picture will pop up on the screen Click Trigger the Record Channel button to select channel If the motion alarm of the selected c
49. en set the file path in the popup window to import export upgrade Export Configuration Upgrade 5 Group and Scheme Setting 5 1 Camera Dwell Group Click Group and Scheme Setting in the control panel to go to the interface as shown below NVMS 1000 mmm Playback Live Preview Live Preview d f Control Panel Home Create Area pe Create Edit or Delete Camera Group Add Device ee cere o Select the camera group to edit or delete View or Edit Device Settings Create Group Dwell Scheme E i E b Create Camera Group Edit or Delete the Group Dwell Scheme Area Camera Name View or Edit Device Settings Area amp Camera Management Set Account Permission View or Edit Storage Server Settings 5 1 1 Create Edit or Delete Camera Group Click Create Camera Group in the above Edit the Information of Cameras Group interface to create a group eo Please select the item which you need to edit Select a group in the group list and then click Delete button to delete it Select a group and then click Edit button PR E Group1 to go to the interface as shown on the right You e a can change the group name and dwell time interval 5 1 2 Add or Remove the Camera Group Select a group click Edit button and MA 1 Group 1 then click Add Or Remove the Camera Group E New Device1_CAMERAO2 New Devicel CAMERAO1 p New Devicel CAMERAO3 in the interface to pop up the window as show
50. er to Play Audio File Note Please refer to section 3 3 2 for Trigger the Big Screen Current big screen channel Null details Trigger the Record Channel 9 3 Video Loss Alarm Click Edit Camera Settings under Device iones BUDA Trigger Alarm Output on the right The video loss configuration steps ISIPIEIZECUNSU GB M IT in the control panel Select a camera and then click Video Loss to go to the interface as shown are the same with the device setting Please rice Er refer to the video loss chapter of the device user Bg DT Nager ri manual Channel Channeli type No Trigger Number Copy to Save Cancel Select a camera and then click Video Tm Loss of System to go to the interface as shown Trigger to Play Audio File on the right Please refer to section 3 3 2 for details Trigger the Big Sareent big screen channel Null Save Cancel NVMS1000 User Manual 0008 9 4 Alarm Preview The alarm preview interface will automatically pop up if the relevant alarm page and alarm preview have been configured already 9 4 1 Alarm Preview Configuration Motion Detection Alarm Click Edit Camera Settings under Device in the control panel to go to the interface Select a camera and then click System trigger under Motion Detection Alarm Settings to go to the interface Click Trigger the Big Screen button under system linkage to select channel Video Los
51. es and all duplicates of this software shall belong our company Users shall not copy and modify these materials independently 3 Our Company will regularly update the statement of privacy right to reflect the feedback ideas of our company and clients Our company encourages your regular examination for this statement to check whether it protects your information or not 4 Users shall not reverse engineer decompile or disassemble this software and offenders must take the responsibility of such breach 5 This software offered by our company shall be charged Users who want to download install copy and distribute this software must be authorized and approved by our company 6 This software is only applicable to the following operation system such as Windows Q accept the terms of the license agreement do not accept the terms of the license agreement Cancel Click Change to change the installation nvmsiooomnstaiation Wizard Choose Destination Location path Click i Next i to continue Select folder where setup will install files Install NWMS1000 to C Program Files NVMS 1000 Change NVMS1000 User Manual Check vcredist x86 and then click wmsxoooinstaliation wizard Lay Components install Next to install this plug in Please select the components you need to install neck box is clear that feature will Click Next check I have read and accept the license terms
52. etting to modify device Sub Stream stream Please refer to section 3 3 2 Image Camera Configuration Settings for details Enable Audio Close Preview Full screen slo a ORO RE ERE LEON Audio Right click on the preview window to choose Enable Audio or click qe icon to enable audio of this channel Note Only one audio can be enabled at the same time If you enable another channel s audio the enabled audio will be closed automatically 4 gt Zoom In Click button on the toolbar in the preview window to zoom in the image click 08 22 2012 10 41 59 El to recover the image E DNA Y Ca E3G 6 G0 9 BLAH lo ESO S AO NVMS1000 User Manual 6 4 Snap 6 4 1 Snap Click button on the toolbar in the selected preview window or right click the CAMERADS window to choose Snap to capture the pictures After snapping pictures a message prompt box A Message Prompt x will pop up to remind you the pictures are F E Successfully capture a picture CAcaptureX51 173 IP captured successfully and where the pictures 7 gt Cameraz 20141117181111 5 bmp Successfully capture a picture CAcaptureX51 173 IP are stored Camera2 20141117181111 4 bmp Successfully capture a picture c capture 51 173_IP Camera2 20141117181111 3 bmp N ote Captur Ing pictur es can be r ealized Successfully capture a picture C capture 51 173_IP Camera2 20141117181111 2 bmp Successfully capt
53. ettings B5 Record Settings y d Motion Detection Alarm Settings Y Video Loss Alarm Settings e PTZ Settings The camera without some functions will not display the relative setting sheets and links Refer to the following figure MP If the area is selected you can edit or delete this area or you can add or remove the cameras of this area If the camera is selected you can configure this camera l y 4 Create Area EA Rename e Remove Camera o Add Remove Camera I Edit the Area of Camera 4 root p New Devicel name Image Preview p New Device2 name hghg Camera Settings PIS Image Settings Record Settings ya Motion Detection Alarm Settings Y Video Loss Alarm Settings e PTZ Settings 3 3 1 Area Management Click Create Area button to create an area Refer to the figure on the right B Prease enter the area name Select an area and then click Rename button to change its name Select an area and Parent Arco then click Delete Area button to delete it Area Name Limited to 1 60 characters e 4 Cancel NVMS1000 User Manual E ec Select an area and then click Add Remove LE NRETETIEDE HTEOC DRESS Camera to go to the interface as shown on the a Please select the cameras on the left to join the right area right Check the camera on the left and then EL New Device3 root click to add the camera to the area Check ctr ieee E New Device2_name the camera on the rig
54. hannel 1s triggered the channel s record will be opened automatically NVMS1000 User Manual Click Video Loss to go to the interface as Buzzer shown on the right The steps of configuring OTEA video loss are the same with the device settings Big Screen Channel Null please refer to the video loss chapter of device E mal user manual Trigger PTZ Channel Channell Type No Trigger Number Copy to Save Cancel Click Video Loss of System to go to the Bauer interface as shown on the right You can set the Vae Io PES Nae Hie video loss of system Trigger the Big Screen Current big screen channel Null Save Cancel Click PTZ Protocol Configuration to go to the interface as shown on the right You can Dicks prototype tak eu enable or disable PTZ Set the protocol address and baud rate and then click Save button to Enable PTZ Disable PTZ Protocol PELCOP save the settings Leora v A Baud Rate 9600 Save Cancel Click Preset Point Configuration to go to Preset Point Name the interface as shown on the right Adjust the ER PRESETOO1 dome direction speed etc by clicking the a PRESET003 buttons Click Add to add a new preset point COE Choose a preset point in the list and then click PRESETOOS Change Name to change the name of the Q Focus UU e ss PRESETOO7 preset point Choose a preset point and then PRESETOOS Zoom click Delete to delete
55. he right You can change account name password e mail address etc In the interface of User management select a user and then click Delete button to delete it 12 3 Account Right Configuration ch oose the item to edit the information of the account userl i 4 Password Protection Y Open Permission Control Unlocked In the interface of User Management select a user and then click Set Account Right to go to the interface as shown below Select the relevant permission to edit Te Camera Permission D 1 L L D m Device Permission 1 a0 E E map Permission Add Resource fa System Permission Name root Live Preview Record PTZ Control Playback Back In the interface of Camera Permission click Add Resource button to add resources Check camera permissions on the right You can add different permissions for different users Click Device Permission to go to the interface as shown on the right Select the permissions on the right Camera Permission Permission Live Preview Record PTZ Control Camera Configuration Playback Backup Cancel 20 Add Resource 2 Remove Resource area 1 Area Live Preview Ri Camera Permission Live Preview area 2 Area Live Preview Ri Record PTZ Control Playback Backup ror Cancel ga mm mm on A an Device Permission umm e PR A O E E map Permission yp T New Devicel DVR Device Pertr on
56. ht and then click to remove the camera from the area Select a camera and then click Edit the Area of Camera to change the area of this OK Cancel camera 3 3 2 Camera Management The real time image will be displayed after selecting a camera You can set up the parameters of this camera gt Image Settings Image settings include image display image video parameters image quality video block and ROI configuration Click Image Display to go to the interface as shown on the right Create the camera s name and set up its display position on the OSD including the time Stamp Click Copy to button to apply the settings to the selected channel Click Image video parameters to go to the HS interface as shown on the right Das eee a ee Adjust the brightness contrast saturation and chroma of the image Clicking Restore Default will restore the above parameters to Qe os Saturation Hue e Restore Defaults factory default settings ives 2 p 40 08 2014 16 25 23 Save Cancel Click Image Quality to go to the interface mmm as shown on the right Index Resolution Fps Bit Rate 1 2560x1440 6144kbps Choose the resolution fps stream image BENE 1024kbps 3 704x480 1024kbps and bitrate according to practical situation Apply Save Cancel NVMS1000 User Manual Click Video Block to go to the interface as shown on the right Enable video block Click Draw button and
57. iguration Data In the interface of Basic Configuration HS click Restore System Configuration to import the configuration data 13 3 Manually Trigger the Alarm Output Click Manually Trigger the Alarm Output Manually Trigger the Alarm Output under Basic to go to the interface as shown on the right Check Enable select the device and alarm out and then set a name for the alarm New Device 1 v Alarm Outputl Alarm Output2 Alarm Output3 Alarm Output4 output Click OK to save the settings After the above settings an icon rE will appear at the right bottom of the software Click this icon to trigger the alarm of the selected device Video Setti 13 4 Video Display Settings pit Set the video title display format and video resolution mode Click Video Display Settings under Basic Video Title Display in the control panel to go to the interface as Title Format Null shown on the right Set the video title display and video resolution mode and then click OK Video Resolution Mode Full Screen button to save the settings e aL OK Cancel 13 5 Synchronize Time for Multi Devices Click Synchronize Time for Multi Devices under Basic in the control panel to go to the LI Synchronize time with PC for all devices in the list interface as shown on the right Click Synchronize button to synchronize time for MO Status all the devices Camera2 04 09 2014 11 07 05 C
58. in the scheme list and then HS click Delete button to delete it Pease select the item which you need to change Select a scheme and then click Edit button to go to the interface as shown on the right You can change the name of scheme and s scheme the dwell time interval Click Add or Remove Group of the Scheme to go to the interface as shown on the NR ense Group 1 right Check group on the left and then click to add the selected group to the scheme on the right Check group on the right and then click to remove the group NVMS1000 User Manual 6 Live Preview Click Live Preview in the control panel to go to the interface as shown below NVMS 1000 amp 1 p New Devicel 416 p New Devicel 418 vicel 412 vicel 425 ficel 4 5 vicel 423 p New Devicel 403 p New De p New De p New Dev vicel 408 vicel 410 vicel 411 vicel 409 ficel 413 p New De p New De New Dev p New Der p New De p New De v New De p New De p New Dev p New Device1_420 D Camera Group vicel_407 vicel 405 ficel 406 Control Panel Playback Da peace 64e Q H Synchronized Start View Sys ev X Device Open Manual Recording Immediate Replay j Start Talk PTZ Control Main Stream Sub Stream Camera Configuration Enable Audio Close Preview Full screen uL f GB cs a g Scheme Buttons description of live preview Toolbar on the display window Icon
59. log information of device Log type Wi System Log Operation Log Playback Check Log Abnormal SCT 2015 01 30 00 00 00 Hr EU 2015 01 30 23 59 59 Ey Type User Name Time Search IP Address First Page Previous Next Last Page Back NVMS1000 User Manual Click View Disk Information to go to the interface as shown on the right Click Refresh button to refresh the disk information Click Edit Network Configuration to go to the interface as shown on the right Set the HTTP port and server port You can select Static IP Address and then input the network parameters manually or select DHCP to obtain the network parameters automatically Note If the port and the IP address are changed here the device will be offline You need to modify the port and IP address of the device See Edit Device Address and Edit Device Port Number for details Click Alarm Input Trigger and Schedule Configuration to go to the interface as shown on the right Select a sensor according to the alarm input Check Alarm and then click Setup button to set the alarm schedule please see 3 3 2 Camera Management for the detailed schedule setting operations Select the sensor type and set the holding time You can also configure alarm trigger Click Select Alarm Out button to set the alarm out Click Select Camera to set the camera Set the big screen alarm camera Check Buzzer and Email as required If you wa
60. may be different in different routers so please refer to the user manual of the router for details The web port 1s shown at the bottom of NVMS1000 software as shown below 3 Get the WAN IP address from the router after port mapping Input the WAN IP address plus web port in the IE address bar to login NVMS1000 NVMS1000 User Manual OB Note When port mapping you need to map port 6063 as well 6063 is used to log in NVMS1000 via ocx WAN Please refer to the above steps to map 6063 14 1 4 The Download and Installation of Plugins Input the IP address plus port in the IE address bar and then click Enter key to go to the interface as shown below NVMS 000 Dinaca innit IEA Please input username Dora uu 1i iz Please input password Login Input the username and password and then click Login to log in NVMS1000 The username and password are the same with which you registered in the PC software If you log in the NVMS 1000 web client for the first time you will need to download and install the relative plug ins for normal use of the live preview and record playback Please download and install the plug ins according to the tips in the interface 14 2 Live Preview The live preview interface is shown as below NVM 5 ILILIL admin Logout Change Password Live Preview Playback Device Management Monitory point z 44 dvr 22 23 P hk Camera 01 EM EHEIE name E
61. n New Devicel_CAMERA04 p New Device2_CAM1 on the right Check cameras on the left and then click to add the selected cameras to the group OK Cancel on the right Check cameras on the right and then click to remove them from the group NVMS1000 User Manual BB 5 2 Group Dwell Scheme Scheme is used for dwelling group by group Therefore at least one group should be created Click Edit or Delete the Group Dwell Scheme on the left side of the menu to go to the interface as shown below NVMS 1000 mmm Playback Live Preview Live Preview ft Control Panel Home Add Device eee M Create Edit or Delete Group Dwell Scheme Create Storage Server Alarm Management o Select the group dwell scheme to edit or delete Create Camera Group Edit or Delete Camera Group um L Create Scheme Group Name Group Number View or Edit Storage Server Settings View or Edit Device Settings Area amp Camera Management Edit or Delete Schedule User Name 1 5 2 1 Create Scheme Add Scheme ae Please input the scheme name and dwell time interval S Scheme Name Limited to 1 60 characters Click Create Scheme button to create a scheme You should set the scheme name the dwell time interval and the group Click OK IS 1 v All Groups button to save the settings The added scheme MA will be displayed in the scheme list m DENN 5 2 2 Edit and Delete Group Dwell Scheme Select a scheme
62. ng to go to the interface as shown on the right Set the relative network parameters of the storage server and then click Save button to save the settings Automatically Obtain the DNS Address Enable un un N un un N un m Lo N m m 00 un a p N S ra N a LO N ua eo 00 un nn m BondingMode_Balance_X Automatically Obtain an IP Address eth1 Automatically Obtain an IP Address m LO N pu o eo zZz N un un N un un 00 N un eo un N o m etwork Address et 192 168 6 203 Subnet Mask 192 368 6 1 Gateway 255 255 255 0 m LO N m e 00 eo a Save Cancel Click Disk Manager to go to the interface as shown below NVMS 1000 x Playback Live Preview m Config storage server s disk info MA Disk Manager gt Property Value E Add raid m RAID 5 RAID 5 RAID 5 RAID 5 Change or delete raid e db 3 De 4 au Serial Number Disk Model youiqed ule N Refresh Back Click a disk in the list to shown its relative information on the right Refer to the following figure NVMS1000 User Manual NVMS 1000 x Playback Live Preview Config storage server s disk info Property Slot 1 Serial Number S1DFPAF7 Disk inf ti Disk Model ST1000VX000 1CU1 B DISK InTOrmation View disk information View raid information Click Disk information on the left of the interface to view all the disks status information
63. nt to trigger PTZ you should select the PTZ channel trigger type and the number of the type Click Save button to save the settings View the disk information of the device Size GB Status Property Source 931 51 Normal Read and Write Device Refresh Back Configure the network parameters of the device HTTP Port 80 Server Port 6036 Static IP Address DHC etwork Address 192 168 Subnet Mask rm input and schedule of the device Alarm In SENSOR 1 v Alarm Setup NO 10 Select Alarm Out Select Camera Null A Buzzer _ Email Trigger PTZ Channel Channell Type No Trigger umber Save Cancel NVMS1000 User Manual Click Alarm Output Configuration to go to the interface as shown on the right Select an R ii siiemenurt cee euumetetts alarm output and then set the output name and holding time for it Click Setup button to set mu Vane the schedule of the alarm out Check Buzzer OutputNane 0 0 as required and then set the holding time for the Holding Time s buzzer Click Save button to save the settings Schedule of Alarm Out Buzzer Buzzer Holding Time s 10 Cancel Click Abnormal Alarm Configuration to go to the interface as shown on the right Select MP Configure the abnormal alarm of the device the alarm type and then check Buzzer and Alarm Type Disk Full Email as required Click Select Alarm Out TEn to set the alarm
64. o play back the record of the device on the right side of the playback interface You can also click button to search the record and then click to play the searched record NVMS1000 User Manual 4 ME ie p m pr Ki f us A ce WM c cs wvicel E M T x 4 1 NS eI EON vvical CAMERA z CES gt AA T E s 1 CAMERA i b i M 4 _ S x AMERA x ES en A 1 2014 15 56 18 L n r Cr ey Hb On yu Group Event list Click this button to pop up the event list mo Record playback model synchronous or asynchronous Playback source setup Local playback remote playback w all playback are available Click El to zoom in the proportion click EY to zoom out the proportion click MJ to recover the proportion to 24 hours proportion When time scale is zoomed in you can view the other time points by dragging the timeline NVMS1000 User Manual Click on the right side of the playback interface to Operation show the operation panel as shown on the right The buttons on the operation panel in the playback interface are the same EA E with that of the live preview interface Please refer to section S Ol 14 2 for details Close i snap ic ww Oe h Magnify Default zc Audio 14 4 Device Management Click Device Management to go to device management interface Click to add device by Quickly add Manually add and Auto
65. ord Partition Set the Ddefault Path of Snap System Startup and Maintenance Set the Automatic Startup and Login Edit Port Select Language Backup and Restore Backup System Config 13 1 System Startup and Maintenance Click System Startup and Maintenance to BEES go to the interface as shown on the right system startup and Maintenance Settings You can set auto login and auto startup of NVMS1000 by checking the two options under System Startup Settings System Startup Settings v Remember Login Boot Software Auto Startup Automatically Restart Your Computer If checking Automatically Restart Your ae Computer the user name and password of the assworc vestart Time computer need to be input time interval and OK Cancel restart time need to be selected Click Edit Port to edit the HTTP port and data port Click Select Language to change the display language of NVMS1000 NVMS1000 needs to be restarted before language changing takes effect 13 2 Backup and Restore When upgrading the software to a new version you should firstly export the data of the previous version and then import them to the new version so that the repeated addition and settings could be avoided NVMS1000 User Manual 13 2 1 Backup System Configuration Data In the interface of Basic Configuration HS click Backup System Configuration to export D jode aa a the configuration data 13 2 2 Restore System Conf
66. our record types respectively 7 1 Manual Recording Select a channel and then click button or right click to choose Open Manual Recording to start recording Click button or right click to choose Close the Manual Recording to stop recording Note If a channel is recording closing preview will give rise to stopping it 7 2 Schedule Recording Click Edit Camera Settings under Device in the control panel to go to the interface as shown on the right Select a camera and then click Local Record of Device to go to the interface as Ae shown on the right Enable Schedule Record and set schedule and pre recording time record duration etc 2 Record Audio Pre recording Time s record Duration s 30 Record Save Time d Never expiry Copy to Save Cancel Click Local Record of System to go to the interface as shown on the right You can choose record stream and set record schedule Please Record Stream A CIF 30fps Set Schedule Save Cancel refer to section 3 2 2 for details NVMS1000 User Manual 7 3 Motion Detection Recording Click Edit Camera Settings under Device in the control panel to go to the interface as shown on the right Select a camera and then click Set Motion Enable Alarm Em Schedule Alarm Duration Alarm under Motion Detection Alarm Settings to go to the interface as shown on the right Enable Alarm of device and set the relevant trigger
67. out Set the disk alarm the ra AFATA alarm will be triggered if the remaining disk UTE capacity is equal to the alarm capacity you set E Email Click Save button to save the settings mccum ilu nm Click User Information Management to go to the interface as shown on the right Click f Configure the user information of the device Add button to add a new user admin Administrator 00 00 00 00 00 00 Manual Record Select a user in the list The permissions Playback User Name User Type Binding MAC Address System Permission Backup which the selected user owns are checked on donis ive onitoring Remote Monitoring the right side of the list You can check or Check Log System Setup uncheck these permissions to change the user shudo ata anagemen permissions Click Delete button to delete the O Talk selected user Click Change button to change Delete Change the user information The password of all the Save Cancel users can be changed while the username and user type are changeable for all the users except admin Click Save button to save the settings NVMS1000 User Manual gt Email Configuration Click Email Configuration to go to the interface as shown on the right Input the SMTP server and SMTP port and then enable the security connection as required Input the From Email username and password Click Add to add a receiver address Select an address in the
68. quickly by answering those questions e After you set the username password and the WU AM questions and answers please click Register to Answer register the super administrator Question two Fathers birthday Register Cancel Input the registered username and password aja m and then click Login to enter into the software If checking Remember Password there will be no need to input the password when you User Name log in next time eee If checking Auto Login it will log in as current user next time automatically Auto Lagin Remember Password Login Cancel Successful login for the first time After successful login a window will pop up Check the partition for storing record files and then click OK to save the settings rtition Set the Partition of the System Record Lg Please select the partition of the system record The available space of the partition must be more than 3GB Partition Symbol Partition Size Remaining Space 45 736 12 966 126 956 67 426 0 106 0 01G 146 376 118 136 mork Cancel NVMS1000 User Manual 2 2 Control Panel Instruction The control panel of NVMS1000 is shown as below NVMS 1000 Ss Clear List Alarm Time 8 4 2015 3 34 58 PM 8 4 2015 3 34 50 PM 8 4 2015 3 34 39 PM 8 4 2015 3 34 29 PM Live Preview Device Alarm Management Motion Alarm Sensor Alarm Alarm Source New Device025 nameMotion Detection New Device025 nameMo
69. rver please see 4 2 Change or Delete the Information of this Storage Server for details You can click Test Connect to test the connection of the storage server Click Add button to add the storage server 4 2 Change or Delete the Information of Storage Server Select one storage server in the Create Edit or Delete Storage Server interface and then click Delete to delete 1t Select one storage server in the Create Edit or Delete Storage Server interface and then click Change to go to the interface as shown on the right You can change the server name IP address port number and other information of the storage server NVMS1000 User Manual Click Change Storage Server Name to go to the interface as shown on the right Input the new server name according to the name rules and then click OK to save the settings Click Change Storage Server Address to go to the interface as shown on the right Set the new IP address of the storage server Please make sure that the IP address of the storage Please input a new name for the new identification for this storage server eee 192 168 51 212 limited to PEREA Cancel 1 60 characters Cancel Please input a new IP address It will be unable to log in to the storage server if the port IP address is incorrect server and NVMS1000 are in the same local area network You can also check Domain to change the
70. s 52 LI MEM Wis Vie Wy cys siesta as easel UI 53 941 Alarm Preview C OBI Ural 53 DEZ ARM PEOVIG Weiss Sea itus testa cdi espuma ed od ack aa ened E 53 DS Alaro n onma ON iaa caian 54 Biz A Te mI Scc C pu DEI I 55 IOT Create AAA O A IN A oly tiinleeiaial PUR Eoi 55 10 2 Modify or Delete Map Hotspot and Hotzone esses 56 10 21 Chanse or Delete Map uti Aa 56 10 22 Add Change and Delete FIotZOne zm o cenare etu iue a vet ea eue aa ee oen iube 56 10 2 3 Add Change and Delete EHotspot 2 eene eene ent adici n 57 11 12 14 10 35 Esmap MoOnto His SHIA OS ii dios 57 104 Emap Live Prey ve Werin N A E 57 Local Lot enis aa T E E E E a 60 TEL SS CALCIO m 60 EZ Los Maintenance iesen A in 6l TES EPON dm mE 61 User Manacementain ii 62 12 1 Create a Resource with the Default Permission occccccccccononocnnnnnnnnnnononocnnonnnnnonononinononss 62 12 21 Create C han oe and Delete SCS a serait thei ii deoa uu dao Manet 62 12 5 Account RIGHT C Onfre UratrOTEo o n p eoo N tese id dedo oe t eMe IUE CR C Ducati 63 A RIT I E I I 65 I54 Systemtartup and MoaImntemance assu AA obeunt ee Oe xem Du oce 65 575 Backman RESO Loud dio 65 13 2 1 Backup System Configuration Data sisine 66 13 2 2 Restore System Contiptirati n Dita a Du onda 66 13 3 Manually Trisser the Alarm OUtDUL 2 o A ooo Ea Teva tois eater dd 66 15 Video Display Sens in
71. s Alarm Click Video Loss of System to go to the interface and then click Trigger the Big Screen button under System Linkage to select channel Y Sensor Alarm Click Alarm Management in the control panel to go to the interface and then click Set the Alarm Trigger button to add the associated preview cameras Click Edit Alarm Preview Settings under Live Preview to go to the interface as shown on the right Alarm preview will pop up automatically when alarm is triggered if checking Automatic Pop up Alarm Page Alarm preview will pop up automatically f Screens 4 in full screen when alarm is triggered if Cose Aarm Kg checking Full screen display when popping up Choose a display monitor in the Full Screen Display drop down menu The alarm image will display on the designated monitor when alarm is triggered Set the number of screens You can choose to close the alarm page automatically or manually You can set the time if auto mode is selected 9 4 2 Alarm Preview After configuring the alarm the alarm preview will automatically pop up 1f the alarm of the selected channel is triggered The default pop up window of the system is an independent interface Please refer to the figure as shown below NVMS1000 User Manual NVMS 1000 Control Panel Playback x Live Preview O NVMS 1000 es ao gt AS CAMERAO1 gt Ne Click A button on the upper right corner of the sub interface
72. s for local playback Bl stands for remote playback stands for all playback Drag the camera on the right side to playback window for playing You can also select a camera and then click Search button to search the record file Click EM button or Play button to play back the record Playback record type includes manual recording motion detection recording schedule recording and sensor recording In the timeline green bar stands for manual recording data yellow bar stands for motion recording data blue bar stands for schedule recording data red bar stands for sensor record data You can zoom in the time scale by clicking e on the lower right corner zoom out the time scale by clicking and recover the time scale to 24 hours by clicking S When the time scale is zoomed in you can drag the timeline to see the time spots By pressing the Ctrl key and scrolling up or down the mouse you can also zoom in or zoom out the time scale 8 1 1 Playback Synchronously Synchronous Playback in a certain time all channels play back its record at the same time spot together if one channel has no record data at this time spot this channel will be waiting Click MEM on the toolbar in the playback interface to go to the synchronous playback interface You can play the record according to the ways introduced in Section 8 1 In synchronous mode one camera can only have one play window You can view all cameras record information at the
73. tion Detection New Device025 nameMotion Detection New Device025 nameMotion Detection Video Loss Alarm Status Record And Playback Group and Scheme Settings Play Record Delete Processing stat Unprocessed Unprocessed Unprocessed Unprocessed User Management la Local Log 1 d Unprocessed NACO The main interface of NVMS1000 consists of five areas The descriptions of each area are as follows Area Description Description Including Control Panel Live Preview Playback Lock and Quit Including Live Preview Control Panel Local Log E map Alarm Preview Playback and Organize View Including Lock Broadcast Switch User Edit Password Export System Configuration Import Configuration Batch Timing and Select Language Hp Including User Manual and About NVMS1000 NVMS1000 User Manual Descriptions of Function Area Description Live Preview To view live images and to record snap and control PTZ etc Record And Playback To remotely play the local record E map To manage and display maps hot zones and hot spots Device To create modify or delete devices areas and cameras Group and Scheme Settings To create modify or delete camera groups and schemes User Management To add modify or delete user and user permission Alarm Management
74. to repair it Click Finish to finish repairing NVMS1000 User Manual Click Next to continue NVMS1000Installation Wizard x J Start Copying Files Review settings before copying files Setup has enough information to start copying the program files If you want to review or change ied with the any settings click Back If you are satisfied with the settings click Next to begin copying files At last check Create desktop shortcuts ws1oo0insrallation wizard and then click Finish to complete the installation InstallShield Wizard Complete Setup has finished installing NYMS1000 on your compute 1 3 2 Uninstall the Software Click Start menu on the desktop and find vsserssieien wizard the shortcut of NVMS1000 Click Uninstall to pop up a dialog window and then click Yes Uninstall Complete to uninstall NVMS1000 ira alce red Click Finish to end the uninstallation after the uninstallation 1s finished NVMS1000 User Manual 2 Login Software 2 1 Login First time to login e If you run NVMS1000 for the first time you ERRE need to register a super administrator You shall User Name self define the username and password e To avoid forgetting the password you can set 1 s Confirm Password some questions and answers to help you find the DADO To avoid forgetting please fill out the real information which will help you peswor quick y get the password
75. tup button to pop up the window as shown on the right e Click and then move the cursor to select the time Click and then move the cursor to delete the selected time e Click Manually to manually input the time Click All reverse to quickly select the time Click Empty to clear all the time e Click System Schedule to select the system schedule e Click OK button to save the settings Schedule Setting of Local Record of System Click Set Schedule button to pop up the window as shown on the right Check 7x24 or click Create Schedule button to set schedule Schedule Setting of Record of Storage Server Before setting up the record of storage server please confirm that the storage server which can be used has been added you can add Record Set Schedule the storage server by clicking View or Edit lecord Stres 1 1080P 25fps Storage Server Settings in the control panel E A Choose a storage server and then set up record schedule and record stream The schedule setup 1s the same with the local schedule setup Click Save button to save the settings NVMS1000 User Manual gt Motion Detection Alarm Settings Click Area and Sensitivity to go to the Set the motion detection area of camera New Devicel CAMERAOS LI Set the motion detection area of the camera interface as shown on the right Vp ES TEE Drag the slide bar to set the sensitivity I ee value The higher th
76. ure a picture CAcaptureX51 178 IP Camera2 20141117181111 1 bmp only in live preview or playback 6 4 3 Snap Number Click Set Snap Default Number under Basic in the control panel to set the snap number 6 4 3 Record and Snap Path Click Basic in the control panel to go to the interface and then click Partition and Path to select a folder to save the record files Click Set the Default Path of Snap under Partition and Path to set up the path to save the snap files 6 5 Multi screen Preview Click button in any interface to plus a tab of live preview Drag any tab of live preview or right click the tab of live preview to select Float to pop up an independent live preview interface as shown below Multi screen preview can be realized by dragging the independent interface to other screen graphics card should support multi screen output at the same time NVMS 1000 Control Panel Playback Synchronized m heme 7 NVMS 1000 K Sch 5 SCA NR E Sroupl E oroup 2 E Group 3 m 03 28 2013 16 10 49 avcel d18 New Dav cel_412 Grou p Scheme s Click MM button in the live preview interface and then choose Tab view NVMS1000 User Manual 80 Vi to embed this tab in the main interface Save as Camera Group Save View Note 1 20 live preview tabs can be added 1024 X 768 2 Live preview interface can be displayed on multiple screens 6 6 Talk and Broadcast 6 6 1 Talk Click E button on the
77. video files within the configured time Note The default path is C backup 8 3 2 Backup Path Configuration Click Basic in the control panel to go to the interface and then click Path of Backup File to set the backup path as shown on the right 8 4 Download Record By Time Search Right click the playback window in the playback interface to pop up a 4 3 drop down list as shown on the right 16 9 Original Proportions wf Full Screen Snap Enable Audio Download By Time Close Channel Full screen Click Download By Time to pop up a window as shown below Select record channel start time and end time check event type and then click Record Search button to search record If the record is searched click Download button to pop up the backup window as shown above AVI and DAT backup formats are available the DAT format is the private format of DVR and the backup files of this format should be played by the player of the DVR Click Browse button to set path Click OK button to back up record NVMS1000 User Manual NA Start View NVMS 1000 Control Panel ES LEL x Synchronized Device Live Preview Download record by time MA 1 IA A 2013 03 20 00 00 00 v End Time 2013 03 20 23 59 59 M p New Device2 9411 PC mle Y Manually T New Device3 2CH Y New Device3_DEVIC Record Search Download vi New Device3_DEVIC A ckup File format e AVI Target path Browse Can
Download Pdf Manuals
Related Search
Related Contents
Valueline VLVP31550B10 Severin BA 3220 IP–Security Camera for indoor usage TX MICRO IMAGE RGB - Performance Audio Entryphone® 53#PTSP Operating Instructions MANUEL D`UTILISATION 0. Table of contents N17Z RAIL-MOUNTED DIGITAL METER Copyright © All rights reserved.
Failed to retrieve file