Thank you for purchasing the MMS-DLUX MMS
Contents
1. s Speaker lt ae Go oo Bracket lt Host Instruction Indicator Status Instruction Indicator Status Instruction Color Indicator Status O o Flash slowly Searching the network Flash quickly Detection activated when power on PIR Sensor alarm or movement detection alarm activated when in working status Constant Light No SIM card or malfunction Constant Light Arming status Gr Flash slowly Disarming status Flash quickly Disarming status een Light two Restored to factory settings seconds Note Turn on the camera When the indicator lights on press the RESET button until the indicator turns green it will restore to factory settings Note 1 Slow flash Indicator flashes 1 time per second Quick flash Indicator flashes 2 times per second 2 The indicator light can be enabled or disabled by pressing the RESET button for more than 10seconds when in normal status SIM Card Installation Remove the cover and take the battery Slide the SIM card into its holder with the contacts facing down as shown in the picture Insert the battery and then replace the cover 5 Chapters Quick start About the SMS Command 1 All SMS commands are composed of symbols and Arabic numerals 2 SMS command format of master and family users code content 3 Password is four digit numbers default to 1234 4 The maximum digit of phone number is 16 5 When SMS command received2. Power on when the indicator is off and before it lights again press the RESET button till it sounds Du and the factory settings have been reset successfully Method 2 Master sends an SMS command to the device 08 password Note Please make sure you add the password in the command only master has the rights to reset factory settings via SMS command If others send the command it will rely sorry you don t have the right to do it 10 Chapter 4 Maintenance alcohol acetone Please use and store this product in suitable Please clean it with soft moist cloth do not temperature Keep it away from excessive moisture use alcohol Acetone or other solvents and extreme temperatures Please keep the camera and all accessories dry Please refer to trouble shooting for problems Keep it away from water or any liquid solution Do not uninstall it yourself For other problems contact the dealers Keep it away from dust Please charge the battery for more than 12 hours to ensure optimum battery performance before your first use Charge it for 4 hours every 3 month if you don t use it 11 Troubleshooting The indicator lights Press the RESET button for 10 disabled seconds or send SMS command Start up failure Indicator Master already set Restore to factory settings works normally Functions failure Caller ID presentation but indicator works or MMS service Please contact the operator norma
3. Set MMS center countries such as China Mobile default 124 hitp mmsc monternet com 1 25 ip wapport httpport apn user owd Users need to reset MMS parameter depends on different Master family Set MMS parameter countries such as China Mobile default 125 10 0 0 127 9201 804 cmwap wap wap 127 value Timing arm the Master famil J device Refer to Quick Start 15 Timer arming 129 working days time period 1start time time period Master Change language Value 0 Chinese 1 English default 128 value 1finish time time period 2 start time time period 2 finish Set time period of ha us Master family _ time time period 3 start time time period 3 finish time timing arming l For details of working days arming time and disarming time please refer to Quick start 15 Timing arming Turn into disarm 138 value Master family status or not after Value 0 close alarm 1 open default Turn into disarm 1 39 value Master family status after several Value 2 to 10 default 2 it means it will enter into times alarm disarm status after 2 times alarm 143 value Disable Enable Master family Value 1 Enable default indicator 0 Disable Send SMS or not 144 value Master family if power supply Value 1 send SMS notice default changed 0 no SMS notice 148 value Set MMS sending Master family Value 1 HTTP way 0 WAP default 1
4. arming disarming status Method 3 Press the Reset button for 3 10 seconds it will automatically switch status too 3 5 Remote Capture Method 1 Make a call to the device via master number or family number hang up in 5 seconds when you hear the ring tone and you will receive the SMS reply Your request has been received the device is sending image s now and then MMS reply followed Method 2 Send the SMS command Master tamily users 03 lmage number Guest 03 Password lmage number And you will receive the SMS reply Remote capture request received the device is sending image s now and then MMS reply followed Note If image size set to 160 128 or 320 240 you can ask for 8 images at most i e 1 8 optional If image size set to 640 480 you can ask for 2 images at most i e 1 2 optional Quick Start 3 6 Alarm With the built in PIR sensor the device can alarm once triggered default to SMS and MMS If alarm SMS MMS and call activated at the same time it will send alarm SMS and MMS orderly and then make phone calls once for each For alarm calls it will dial the master number first and then family numbers until answered If no answer for even 3 cycle calling then it will give up Notes The device is default to Movement Detection Alarm if you would like to change the alarm way please refer to SMS commands list 3 7 Voice Monitor amp Speaker Master and family users can dia
5. it will automatically reply Note by semicolon in English 3 The maximum length of SMS parameters is 50 characters 1 The symbol is necessary for the SMS command but no space hiss or digits 4 Allletters numbers and symbols should be SBC case character included Chinese characters not allowed 2 1 15 SMS commands can be sent in one SMS separated 5 Space not allowed H 3 1 Start Up Please set the master before you use this device or when restored to factory settings i e to let it recognize the master phone number so that it can send alarm SMS to the master automatically There are two methods as follows Method 1 Make a call with your mobile phone and you will hear it hung up Method 2 Send the SMS command to start up 00 After starting up you will receive a SMS reply Welcome Congratulations on your purchase of MMS DLUX You are authorized to use this device Password 1234 Quick Start 3 2 Power On Off Power on Keep pressing power switch when power supply external power supply or battery on during this period of time you will hear power on music then indicator turns red and then off after a while it turns red again and flashes slowly till off and then turns green keep green when armed slowly flashes green when disarmed and sounds DU then it turns to normal working status now If it is set to arm after the designated time delay it will sound DU DU and turns to ar
6. 6 Appendix SMS command list 152 number The number is the device SIM card number Regulate device time Master family Activate Speaker Please regulate again when replace or reinstall the battery Activate Speaker 164414 Master family Deactivate Speaker 164 0 Default Delayed range can be from 1 to 30 Min Default to 1 Min i e it will not make alarm within 1 min when power on Master family Time Delay even if it detects people or movement Note Press the Reset button for 3 10 seconds it will automatically switch status between arming and disarming 211 value Remote control Master family Value 1 Remote function open switch 0 Remote function closed default Time period of 2 12 time begin time end Master family remote control Default to 212 10 00 16 00 Master family alarm images for Number 2 to 8 optional default to 5 at most 8 If image timing MMS size is 640 480 the number can be at most 2 only 214 number Change number of Master family alarm images for Number number of images when you dial to obtain MMS remote capture 2 to 8 optional default to 5 at most 8 If image size is 640 480 the number can be at most 2 only Thank you For any further assistance contact www securitywireless co za E mail gsmit wirelesscamera co za Tel 27 12 654 6209 17
7. O Thank you Thank you for purchasing the MMS DLUX MMS DLUX is a smart GSMIGPRS remote camera It helps you achieve remote monitor alarm and shooting and thus provides a safe solution for protecting your privacy You can freely ask the device to take photos and send to your mobile phone or mailbox in slide show by phone call or SMS command any time anywhere With the built in IR lights it can take high resolution images even in dark environment When anybody break in it can trigger aware immediately then take photos and send to you automatically in this way your privacy safety and security can be effectively protected All functions and service are supported by the GSM network and SIM card For detailed operation and product functions please read this user manual carefully For your safety M Please make sure the GSM SIM card PIN code de activated and caller ID presentation amp MMS service activated Please do remember and keep the password and SIM card number secret For Your Safety Keep it away from signal interference Do not use it in any explosive places Please use the original power adapter to avoid any damage Keep it out of the reach of children Declaration The information contained in this manual has been carefully checked and is believed to be accurate However we assume no responsibility for any inaccuracies that may be contained herein In no event will we be liable for any dire
8. ct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages In the interest of continued product development we reserve the right to make improvements to this manual and the products described herein at any time without notice or obligation Product Feature Chapter 1 Product Features Product Features 1 All GSM SIM cards can be used capable of sending photos taken to MMS service enabled mobile phone or mailbox 2 Integrated PIR sensor to provide precise and timely alarm 3 Built in CMOS camera and IR lights it can take clear images at night 4 Movement detection it can detect movement in view 5 Phone call and SMS central You can remote control the Camera by phone cell or SMS command 6 Two way communication You can listen to the voice of monitoring place and your voice can be broadcasted via built in speaker 7 Multi mode alarm II can alarm by SMS MMS E mail and Phone call 8 Schedule monitor It can timer arm or monitor as the preset scheduler 9 Backup battery Built in Lithium battery ensures operation for power failure 10 Easy installation Wireless connection it can be installed anywhere Product Accessories Product Accessories Camera Adapter Manual Host Instruction Chapter 2 MMS DLUX Host Instruction Power Switch Camera Infrared Light Reset Button PIR Sensor
9. endiomalor A1 send to mai Master family 0 not send to mail default not Note Sending to mail on the condition of opening the MMS sending when it makes alarm 113 family user Master Delete family users l J Instruction 113 means delete all the family users Activate MMS timer 115 1 sending Master family Deactivate MMS 115 0 Default timer sending 116 working days time period 1 start time time a period 1 finish time time period 1 sending interval time Time intervals of oo Master family period 2 start time time period 2 finish time time period timed sending MMS a 2 sending interval time period 3 start time time period 3 finish time time period 3 sending interval Activate PIR sensor 118 1 Master family Deactivate PIR 118 0 Default sensor 150 value Set time intervals of Master family Value is from 2 to 10 Default 2 minutes It means it will infrared alarm make alarm again only if 2 minutes later 210 value Value 0 or default 1 and Set combined alarm Master family Or means it will make alarm either Mobile detection or way Infrared human body detection opened And means it will make alarm only if both Mobile detection and Infrared human body detection are opened 15 16 Appendix SMS command list 124 MMS center Users need to reset MMS center depends on different Master family
10. l the device number till the phone call get through automatically to monitor the live voice If the speaker is open you can scare to the monitored area too The speaker is default to open Besides when active alarming phone call gets through in armed state the speaker will automatically open so that you can scare Send the following SMS command and you can control the speaker 164 Value Value 0 to close speaker Value 1 to open speaker You will receive a SMS notification Speaker closed open 3 8 Language There are two versions of language available send a SMS command for master only Chinese version 127 1 And you will receive the SMS reply Language switched to English 3 9 Status Inquiries You can ask the device for the present settings and working status send a SMS command as follows and you will receive a reply with all details oassword not included Master and family users 07 Guest 07 password 3 10 Help Quick Start You can ask the device for help send a SMS command as follows and you will receive a reply with command list or user manual For SMS commands Master or family users 09 Guest 09 password For User Manual Master or family users 09 1 Guest 09 password 1 3 11 Reset factory settings When the settings status wrong cannot recover even power is off you can reset the factory settings clear all user s settings including master phone number Method 1
11. lly deactivated overdue Indicators remain on No SIM card or Power off check the SIM card and poor wrong contact restart in 2s Power off check the SIM card and Operation failure malfunction restart in 2s Or restore to factory settings Weak signal or Power off and restart in another a network busy place with stronger signal After start up indicators SIM card PIN code remain flash red not Remove the PIN code activated turn to green Check the SIM card status with the Invalid SIM card operator Failed to power on with external power after Battery over Charge the battery for 1 hour long time supply of discharged power off and then restart battery Disorder of timed arming and timed MMS Wrong time in device Check automatic timing once sending Note If the problem can t be solved with the above guidelines please contact your local dealer or after sales center 12 13 Appendix SMS command list OO Master Start the device Master family Arm the device Refer to Chapter 5 Quick start 1 start up 01 Refer to Chapter 5 Quick start 4 Arming 02 Disarm the device Master family Refer to Chapter 5 Quick start 5 Disarming 03 password image number Master family guest Capture MMS image Refer to Chapter 5 Quick start 6 Remote capture image Master family guest Restore to factory settings SMS command User manual 04 old password new passwo
12. med status The time delay can be designated by SMS command please refer to the SMS commands list Power on Arm time delay Power off Keep pressing power switch till you hear power off music 3 3 Add Family Users Master can send SMS command to the device to add family users 06 family user mobile phone number 10 family users number max same numbers not allowed Privilege levels for Master Family users and Guests Family Master Guests Users Receive MMSAlarm de Receive SMS Alarm yooo x Receive Phone CallAlam NK K h Restore to Factory settings and add family uses phone numbers x Ni Chineserengisnswn Ko eo oo ae Quick Start 3 4 Arming Disarming To arm the device is to activate the alarm function thus the PIR sensor or movement detection turns to working state Product is set default to Arming status To disarm the device is to deactivate the alarm function the PIR sensor or movement detection turns to off working state There are following two methods Method 1 Send the SMS command to arm 01 You will receive the SMS reply Armed successfully and the indicator will turn green Send the SMS command to disarm 02 You will receive the SMS reply Disarmed successfully and the indicator will turn to slow green flash Method 2 Make a call to the device via master number or family number hang up in 5 20 seconds when you hear the ring tone and it will automatically switch the
13. rd Instructions the length of master s password 4 digits 06 family number You are allowed to add up to 10 different family numbers 07 07 password Status inquires 1 Password needed when guest sending 2 Refer to Chapter 5 Quick start 18 Status Inquires 08 password Instructions Password is the current default one 09 password Master family guest 09 password 1 Refer to Chapter 5 Quick start 19 Help Deactivate SMS alarm 11 0 Master family Activate SMS alarm Default 11 1 Deactivate MMS alarm 1 2 0 Master family Activate MMS alarm Default 12 1 Deactivate call alarm 13 0 Master family Activate call alarm Default 13 1 14 new master number Master Change master number Instructions 16 digit max 13 14 Appendix SMS command list 22 value Switch of mobile Master family poe Value 1 mobile detection open etection 0 mobile detection closed default 36 grade Grade 1 2 3 4 5 optional from 1 to 5 stands for the Sensitivity of mobile Master family er etection sensitivity from the low to high default 4 201 times Master family Set of mobile times Times from 2 to 10 Default 2 It means it will make u u u u u alarm once when objective mobile 2 times Delay time of 202 delaytime Delay time 1to 10 min default 2 minutes It means it Master family Mobile detection ala
14. rm will make alarm again only if 2 minute later Send captured 30 password value image number MMS image to Master family guest appointed mobile 1 Value Mobile number or Mail address number or mail 2 Guest need password address Enable IR lights 31 1 Disable IR lights 31 0 default 32 value value 1 160x128 normally used size for mobile phone 2 320x240 QVGA default 3 640x480 VGA For example 32 1 means auto alarm image size as 160 128 33 image number Change alarm Number 2 8 optional and default to 5 max to 8 Master family Master family Change image size Master family image number image size is 640 480 the number can be 1 2 only 34 value Set image Master family The value can be 1 2 3 4 5 From 1 darkest to 5 brightness brightest default to 4 35 value Master family Mirror image Value 1 mirror image of left and right 0 no mirror image default 38 value Master family Set image contrast The value can be 1 2 3 4 5 From 1 lowest to 5 highest default to 4 14 Appendix SMS command list 119 grade Master family Image quality Grade can be optional from 1 to 4 1 is lowest 4 is highest default is 3 108 EMAIL Add or modify Email Email means email address everyone can set one mail Master family address and can be modified 109 Master family Delete Email Delete mail box 110 value i V 1 il Aam s
Download Pdf Manuals
Related Search