Hall Aquastyle installation and user manual
Contents
1. The HF receiver has a Reed relay inside To pair the receiver with the master clock bring a magnet near the receiver When the magnet is brought near the receiver the red LED Detail Starts blinking rapidly 100ms ON 100ms OFF Keep the magnet near the Reed relay for at least 3 sec or until the Led starts blinking more slowly 500ms ON 500ms OFF then the receiver will try to synchronise itself with a transmitter that is itself in the INIT mode When the synchronisation is achieved the LED blinks ata rate of 1 second 50ms ON 950ms OFF If needed change of the transmitter channel new installation the same method can be used to put the video display in the INIT mode 19 Synoptic of an Aquastyle installation Technical room Master clock with radio antenna DHE time distribution Reception hall Aquastyle Video HF reception and information display Large Pool Pool area LED Aquastyle HF reception and temperaturs display Small Pool Bodet Technical room N HF temperature probes Temperature measurement HF transmission 202. If you wish to modify the display this must be done with the supplied software application on a PC with a Windows OS XP Vista or Seven The new display will be saved on a USB flash drive The flash drive will hold The parameters which are necessary to the mini PC and display operation The various pages which will be displayed on the screen The record of the probes configuration As soon as the USB flash drive is plugged in the mini PC the data contained in the flash drive will be copied automatically in memory The display of the new screen pages starts as soon as the transfer is completed IV 1 Parameter setting The reception hall Aquastyle must configured when it is installed To proceed with the configuration a keyboard must be connected to a USB port of the mini PC or to the USB hub of the monitor IV 1 1 First screen of the parameter setting At installation time e Insert the supplied BODET USB flash drive named BODET_ AQUAZ2 gt in one USB port of the mini PC or in the USB hub of the 22 monitor The flash drive contains all the necessary directories and files e Turn on the mini PC and wait for the screen of first time use 1 Properties of the mini PC Components to specify the time zone the local time the date and the language of the display 2 Save and Cancel A button Save to save the data into the mini PC anda button Cancel e Select the time zone set the time an
3. Petit bassin Loading e Backup peset on the PC ens the USE Grand bassin 1 Options tool bar 3 buttons that let you change the language display information about the software application and exit the application 2 List of USB flash drives A list that lets you choose the Aquastyle USB flash drive You can refresh the scrolling list with this button 3 Button Modify the sequence This button opens a work session from the sequence contained in the chosen USB flash drive if it is the Bodet Aquastyle flash drive 4 Button Load the sequence This button lets you load the last version saved on the PC onto the selected flash drive Warning the flash drive is formatted content completely erased before loading The USB flash drive contains a default sequence that is used during the first installation This sequence can be edited by using the Modify the sequence button In case of mishandling loss of the flash drive or data corruption the backup sequence contained in the PC can be reloaded into the flash drive by using the Load the sequence button If you wish to save several different applications for example week end special school special you must create them on separate flash drives by using the Load the sequence button But be aware that you must first save the PC sequence before making any modification 12 1 Tool bar 3 buttons that allow quick access to the Wel
4. you exit the application Free Information pages screen 2 Page properties General properties of the page It is possible to assign a name to the page to select the type colour and size of the font to be used and to select the background colour and the duration of the display of the page 3 Preview of the page Window that lets you see how the page will look like when the page is displayed on the Aquastyle video display 4 Text management 2 buttons let you add or remove texts You can select a text among a list and edit it in the writing window 5 Image management 2 buttons let you add or remove an image or PDF A cursor let adjust the size of the image 6 Text alignment 2 buttons let you align the text vertically and horizontally 7 Browsing buttons These 2 buttons lets you browse through the application one step at a time The Free Information pages can contain up to 8 elements 4 texts and 4 images or 4 texts and one page in the pdf format called objects The format of the text font size and colour the background colour and the duration of the display of the page within the sequence can be modified using the scrolling lists 2 buttons let you align vertically and horizontally the various elements The supported image formats are jpeg bmp png and pdf pdf one page The total size of images for the whole application cannot exceed 100MB To achieve a full screen display on
5. a CD e This manual The CD supplied with your equipment contains the software application that allows you to program the display The programming can therefore be done on a PC and transferred to the mini PC by mean of the USB flash drive Caution the installation and maintenance of this equipment must be carried out only by authorized personnel This product is specified for indoor use only It is supplied by 115 or 230V AC The installation must comply with the IEC 364 standard NFC 15 100 for France A 10 A circuit breaker easily accessible must be installed in the power supply line This circuit breaker provides the protection of the equipment and for safety must tripped off during maintenance The installation must be completed before applying the power to the equipment Any modifications to the product will void the warranty The Bodet company cannot be held liable for any accident resulting from a use of the equipment that does not comply with the instructions of this manual Il Mechanical installation The Aquastyle must be installed in a location that ensures a good HF reception The location must be free of any electromagnetic disturbances transformer cathode ray tube The display complies with the VESA FDMI standard Flat Display Mounting Interface ll 1 Stand mounting The Aquastyle is supplied with a wall mounting bracket As an option a stand enables the Aquastyle to be hung of a ceiling or simpl
6. Any hardware modification must be performed with powered removed from the Aquastyle lll 1 Wireless time synchronisation DHF The reception hall Aquastyle gt ar can be radio synchronised by Bodet DHF Nanotime The synchronisation is accomplished E by pairing the Aquastyle DHF time Video with the Nanotime The fee transmission Aquastyle shipped out of factory was configured with a Nanotime programmed on channel 1 If needed transmitter channel change new installation it is possible to put the display in Initialisation mode see Appendix 1 Pairing procedure page 19 Ill 2 Wireless temperature synchronisation THF Pairing is not necessary The transmission of temperature is accomplished by the Aquastyle temperature probes radio controller see Pool temperature radio transmitter manual IV Use of the reception hall Aquastyle When the reception hall Aquastyle is powered up for the first time parameters must be set see IV 1 Parameter setting page 8 As soon as the reception hall Aquastyle is turned on it starts broadcasting the memorized information It receives the time and temperature data sent by radio If the time signal is not received the Aquastyle displays the time of the mini PC default If the temperature signal is not received the Aquastyle displays C or pe EAE ET E Reception hall ig se eames AQUASTYLE AQUASTYLE software US6 flash drive Q
7. Reception Hall Aquastyle Video display Installation and user manual BP1 49340 TREMENTINES FRANCE C T l 00 33 241 71 72 00 DI Fax 00 33 241 71 72 01 ame caeron www bodet com R f 607526 C E Upon receipt always check the product for damage during shipment If any is found you may file a damage claim with the carrier Table of contents OVOIVIOW E 3 ME CK IG the CO UID IMICI set esncsiessadeccneonmecstienaioe vetocehecercasoveneodadeusersensiondtecencs 3 Il Mechanical installation ccccccccseecsseeseeeceeeceeseeeseeeeeeeees 4 I Stand MOUNtUNg sses E E S EE EREE 4 I2 Wal Mounin esseer ara 4 a Bracket MSTA All OMe cxtarczconnesnapenimrecscanteneante sans taceuaiaeiianiunencsmuausnest 4 b Bracket installation ON the screen cccccseeeceeeseeeeeeeeeeeeeeseeeeeeeeeas 5 Il El ctrical mstanaloNsecsse a 6 Ill 1 Wireless DHF time synchronisation cccceccseeeeeeeeeeeeeeeneeeeeeenes 6 IIl 2 Wireless temperature synchronisation THF cccecssseeeeeseeeeeeeees 6 IV Use of the reception hall Aquastyle cccccseeeeeseeeeeeeeeees 7 IV 1 eran Le FSU WO arsncet sancheavancusatctestecnpeadusesaimaneaumcnevancveaeneiteateciaarecsis 8 IV 2 Time Seling eiareaseten cana ai ntesats teeta nan sialic deealsaisct Dactpaustorsaeecina aaa 9 V Screens configuration ise casenctccecone deatmannsncseisgereeaetdendsetesseparedt 10 VA FGI ONG reee E E E E E EE E E 10 V 2 So
8. and the data that it might hold will be erased The data is copied in memory and the display starts as soon as the USB flash drive is installed on the reception hall Aquastyle V 2 Software application installation The software application runs only on PCs equipped with a Windows OS Insert the CD in the reader If the automatic execution is activated execute the setup when Windows asks for your authorisation if not access the root of the CD and click on the exec file bodet_aquastyle_setup exe Select the language that you want to use for the installation and when running the application It is always possible to change the language by using the Language button of the welcome screen Once the application is installed on your PC and the setup is finished the Aquastyle software is ready for use During the installation you can create a shortcut on the Windows Desktop A directory named Aquastyle was created in the menu Start Programs where you can find a link to uninstall the program while keeping all your backup copies for future use NOTE Some antivirus particularly avast Antivirus can corrupt part of the installation In this case we recommend to deactivate the antivirus during the installation 10 V 3 General information The software application is structured as a logical succession of screens e Home page Welcome Screen Choice of the language lt Modification of the sequence containe
9. choose not to display some pages by checking the pages This option allow the user to create pages ahead of time or to save pages that would be displayed later on special events pools closing draft of pages etc You can also preview the sequence before saving it by using the button 4 Display the sequence It is possible to schedule the display of the sequence during a particular time frame or permanently If the USB flash drive is removed during the page edition then the sequence cannot be saved The flash drive must reinserted in the same USB port than the one used when creating the Home page Press the button 4 Save the sequence to save the sequence in the USB flash drive A pop up dialogue box confirms that the sequence has been saved and ask the user if he she wishes to create a backup copy in the PC Note if the user wishes to have several recurrent types of display displays geared toward schoolchildren retired people the user must save each sequence on individual USB flash drive and load the sequence before use 16 VI Technical characteristics Designation Characteristics Power supply 115V 230V 10 6 50 60HZ Consumption 22 display 300 mA at 230V 600 mA at 115V 32 display 700 mA at 230V 1 4A at 115V Electrical Insolation Class HF radio frequency Coverage 869 MHz 100 m maxi in swimming pool building Parameters saving in case of power loss Permanent Operating temperature ra
10. come screen to the Page Selection and Sequence Saving uam Screen or exit the application enera senge 2 Pages default properties Pages dagiay tammen e Scrolling lists that let you set for the em asin ai new pages the display duration the pages background colour the font with its size and colour 3 Sensor display Table listing the installed temperature sensors with the possibility to assign labels and offsets to them Parameter setting screen 4 List of the sequence pages List of all the pages presently created The choice of which particular pages to display and the sequence in which they ll be displayed is done on the Pages Selection screen 5 Preview window A preview of the page selected from This screen lets you set the main parameters the list 4 is displayed in this window The page can be modified or deleted Page display duration from 1 to 30 seconds Modify and Delete buttons Pages background colour 16 colours 6 Add page in the sequence Text font A button and a counter are assigned Font size to each type of page Sensor Info or Font colour Free Info The buttons are used to add pages and the counters show the These parameters are set as default for all screens but they can be available number of pages changed on each page 7 Browsing buttons The Sensors information pages allow displaying the temperatures These 2 buttons lets you browse
11. d in the USB flash drive Copy the sequence saved in the PC onto the USB flash drive Warning all the information contained on the flash drive will be erased e Parameter Setting Screen Selection of the default parameters for parmneteFSetting the new pages screen Assignment of names and offset for the various temperature probes Add or remove free pages or sensors information pages within the sequence s i e Sensor Information Pages Editor i Selection of properties common to i E Ren all the pages you will create name s A R background and font colours font type and size duration of display Number and content of the lines of information Size of the Bodet logo e Free Information Pages Editor Selection of the properties of the page name background and font colours font type and size duration of display Add remove text Welcome screen Free information pages editor screen Add remove images Alignment of texts and images e Screen for Page Selection and Sequence Backup Sorting of the pages within the sequence Preview of the sequence Permanent display Time slot USB flash drive and PC page saving Page selection and page saving screen 11 V 4 How to use the application how to create screen sequence Start the Aquastyle program Welcome screen Weicome into Aquastyle Chanpag th Sequence Contamed an 1e USB fash ine
12. d the date automatic if the DHF synchronisation is used select the language e Validate with the Space bar IV 1 2 Second screen of the parameter setting After validation of the first screen the following page is displayed on the screeen You can also access this page by typing bodet on the keyboard while holding down the Cirl key Ctrl bodet 1 Probes 15 lines table that lets you assign a name of area to each probe A field that is left blank is interpreted by l the system as a non existent probe Dalar bekbve defaultdiepiay m The probe number corresponds ia it fei z to its id position of the probes on the wireless temperature Display unit im probes card and the dips setting 2 Sequence properties Refresh tin Group that lets you set _ adelay before which the default _ screen will be displayed in case of Other configuration Gack up Canes failure to receive the temperature data _ the unit for the temperature display the temperature refresh rate __ 3 Other configuration Backup and cancel Pool temperature probes Dips etting Air temperature probe This screen lets you configure the temperature probes by giving them names of zones logical names zone 1 zone 2 and set general parameters of the display operation delay before which a default display will be put on the screen in case of failure to receive the temperature radio signal the unit that will be u
13. ftware application installation cccccccccccssseeceeeesseeeeeeeeeeseeeeeenees 10 YV 3 General informati n ase Paiecniar ears snnavantaracainedasaneaesivanarnadteonnianasvnrdecarnrvans 11 V 4 How to use the application how to create screen Sequences 12 VI Technical characteristics ccccccccseccseeceeessseceeeseuseaseesaees 17 VII What to do if 2 oo cecccccccceeeeceeeeeeeeseeeeseeeeseeeesaeesaeeesauess 18 Programming Memo seserian a RE oas 18 Annexe 1 How to pair the HF receiver with the master clock 19 Synoptic of an Aquastyle installation ccccecccssseeceeeeeeeeeeeees 20 Overview The Reception Hall Aquastyle is an indoor video display lt is used to display the date the local time the pools water temperatures the air temperature and customised information for the public Display 16 9 22 56 cm or 32 81 cm with a resolution of 1920 x 1080 pixels The display is driven by mini PC supplied A HF radio receiver gathers the temperatures sent by the probes and the local time send by the master clock Additional information are imported via a USB flash drive 2 GB A time slot allows the programming of the sleep mode of the screen Power supply 115 230 V 50 60 Hz Checking the equipment You should have received e One display with miniature PC wall mounting bracket and mounting hardware e One USB flash drive e The software burnt on
14. isplay of the page 3 Preview of the page Window that lets you see how the page will look like when the page is displayed on the Aquastyle video display 4 Selection of information Selection of one to three lines of data and the type time or temperature 5 Size of the Bodet logo Select the size of the logo within a scrolling list 6 Browsing buttons These 2 buttons lets you browse through the application one step Unlike the Sensor Information pages the name of the Home page at a time cannot be modified A Sensor Information page can display up to 3 lines of information therefore up to 3 different sensors at a time At least one line and no less can be displayed and there are check boxes that allow displaying of a 2nd and 3rd line 3 scrolling lists let you select the information to be displayed which can be of 3 types time date and temperatures only Celsius unit displayed by default the following way 00 0 C Time can be displayed under 2 formats HH MM and HH MM SS but only on the first line On the welcome page the first line can only display the time or the date There cannot be duplicates of temperature from the same sensor on the same page but it possible to display the same temperature on different Sensor Information pages 14 1 Tool bar 4 buttons that allow a quick access to the Welcome screen to the Parameter setting screen to the Page Selection and Sequence Saving screen or let
15. measured by the sensors installed in the different areas of the pool through the application one step at complex a time Each sensor is identified by the area in which it measures the temperature The user can label name the sensors as he wishes and define an offset to each sensor Thus if the user assigns the label Olympic pool to the sensor in the main pool area then the sensor will appear as Olympic pool on all the sensor information pages 2 sensors cannot have the same label It is possible to apply an offset from 9 9 to 9 9 C to each one of the sensors For example if a sensor measures a temperature of 20 C and was assigned an offset of 5 then the temperature displayed on the Aquastyle will be 25 C Display of at least one Bodet Information page the Home page The maximum number of Sensor Information pages depends on the number of declared sensors up to a max of 15 The maximum number of Free Information pages is 20 13 Create modify your display sequence 1 Tool bar Sensor Information pages screen 4 buttons that allow a quick access to the Welcome screen to the Parameter setting screen to the Page Selection and Sequence Saving screen or let you exit the application 2 Page properties General properties of the page It is possible to assign a name to the page to select the type colour and size of the font to be used and to select the background colour and the duration of the d
16. nge 0 C a 40 Protection index IP 20 IK 07 Time base accuracy lt 0 2 sec day at 25 C Weight 22 display 8 7 kg 32 display 16 5 kg 550 780 T 360 470 Wall mounting type VESA 100 17 VII What to do if What to do if When turning on the power Check the status of the green LED on the mini PC the display does not start LED off No power Check the presence of mains Check that the blue LED of the LCD screen power button is on LED off press the power button to turn on the LCD screen Insert the USB flash drive to reload the sequence If still not OK call BODET Drift of the time base Install a DHF a leah with a Nanotime master clock or perform the pairing see page 6 The radio pictogram is Loss of synchronisation with the master clock after a restart a blinking power failure or a period gt 24h without reception The sequence remains Turn off the main power stuck on the same information page The displayed time and or Turn off the main power the date are incoherent Programming memo of the installation Sensor physical address Areas logical names Labels displayed names Po 18 Appendix 1 Pairing procedure If channel 1 is used by another application it is possible to assign a different channel Put the video display in INIT mode see procedure below Change the transmission channel of the master clock and put it in S55 the INIT mode
17. sed to display the temperatures degree or tenth of degree and the temperature display refresh time The modifications are saved directly in the sequence configuration file modification of the sequence parameters contained on the USB flash drive Therefore a Bodet flash drive must be connected to the mini PCII before performing a backup If no flash drive is detected a warning message will be displayed The fields that make up this screen are initialised with the values of the sequence contained in the Bodet flash drive In case of need the Other configuration button lets you access the first parameter setting screen but be aware that any modifications done on the second parameter setting screen will be lost It is therefore recommended to backup first or to access the first parameter setting screen before proceding to modifications on the second screen IV 2 Time setting When the Aquastyle is not synchronised by a master clock an eventual drift of the mini PC time base can be corrected by typing on the keyboard the following key sequence Ctrl time hold down the Ctrl key while typing time V Screens configuration V 1 Principle The software application supplied on the CD will let you create and modify the display sequences of the reception hall Aquastyle Once created or modified the display sequence is saved on the supplied USB flash drive Warning The flash drive used for the data transfer will be formatted
18. the Aquastyle video display the image must be in the 16 9 format 15 1 Tool bar 3 buttons that allow a quick access to the Welcome screen to the Page Selection and Sequence Backup Screen Parameter Setting screen or let you exit the application Save your display sequence 2 List of the pages List of the pages that lets you select and organize the sequence in which the pages will be displayed 11 06 2012 3 Overview 7 Preview of the page selected within Olympic pool the list and preview of the whole sequence in simulation mode Outdoor pool 4 Display and save the sequence buttons 2 buttons that let you simulate the sequence in the preview window and save the sequence into the USB flash drive and the user PC 5 Display the selected pages The sequence can be displayed permanetly or on a schedule Dhaigiiy Ta ideiei paged 6 Browsing button The last step of the editing process is to organize the sequence in This button lets you go back to the which the selected pages will be displayed previous page The list of available pages is displayed in the left window 2 and when selected a preview of the page is displayed in the overview window 3 2 buttons let you move the selected page up or down within the sequence The selected page can also be moved by the drag and drop action Exception the Home page cannot be moved and will always remain in the first position It is possible to
19. y rest on a flat surface table shelf Refer to the manual of this stand 11 2 Wall mounting a Bracket installation Make sure that the wall is strong enough to support the equipment Mount the Aquastyle bracket with the 2 8mm screws supplied with it and the proper wall plugs 10 mm Pe a Note For an installation on a wall other than a concrete wall the drilling must be adapted to the material for example 5 for wood After tightening the screws put the covers back on to hide the screws b Bracket installation on the screen Remove the 4 screws A on the back of the screen and replace them by the supplied spacers B Coil up the excess cable beside the mini PC and secure it with the supplied tie wrap D Mount the mini PC on the back of the screen with the supplied 4 screws E For the 22 screens connect the screen F to the USB port G of the mini PC Ill Electrical installation The reception hall Aquastyle accepts a 115 to 230V 50 60Hz supply voltage Connect the supplied power cable to a circuit breaker 10A maximum which must be tripped off before performing any maintenance on the Aquastyle The time and temperature data are obtained via a HF radio receiver The receiver gathers the temperatures from the probes connected to a HF transmitter and the time signal from a Nanotime master clock ensuring a perfect precision
Download Pdf Manuals
Related Search