Manual AVI7D1004
Contents
1. User Manual MOBLE SETUP Icon highlighted when Enter_ito enter into setting interface shown as SERVER PORT Mobile monitoring port Input the correct DEFAULT APPLY mobile port press APPLY to confirm Setting 1024 and 65535 Default value is 15961 Please note that NETWORK TYPE Select different mobile network from the options of 3G 2 5G 2 75G and WIFI press APPLY to choose different network Explanation Please connect DVR to Internet before setting DVR port number and the server port is not equal to network menus Note You can only see one channel at one time when viewing from a mobile phone The speed of the display depends on the speed of the internet connection 2 2 11 ALARM SETUP Move the cursor to ALARM Icon highlighted when selected press setting interface shown as Fig 2 42 29 Enter to access User Manual Fig 2 42 CHANNEL Include CH1 CH2 CH3 ALL please select the channel you need to setup I O ALARM I Each channel corresponds to an I O status which means when an alarm is triggered it will activate the corresponding channel to start alarm recording N O Indicate O input level from high to low Set to N O if you use external sensor alarms that are normally open N C2. independently FRAMERATE Change the record frame rate for current channel The higher the record frame rate the more natural movement you will see while playback Independent each channel frame rate adjustment is possible For PAL video output format resolution of system default value is CIF frame rate of system default value is 25 frames per second with each channel which means the system will record 100 frames per second with all channels User can set frame rate as 1 25 frames per second with each channel The max value of total frames per second with all channels is 200 frames with CIF resolution For NTSC video output format resolution of system default value is CIF frame rate of system default value is 30 frames per second with each channel which means the system will record 120 frames per second with all channels User can set frame rate as 1 30 frames per second with each channel The max value of total frames per second with all channels is 240 frames with CIF resolution 19 User Manual AUDIO OPEN Means the audio recording for all channels is enabled CLOSE Means audio recording is disabled MODE Include ALWAYS and SCHEDULE two options ALWAYS Means the device will start recording when it starts up SCHEDULE Recording as scheduled you can setup schedule as you want as Fig 2 21 CHANNEL You can select all channels or just one channel There are three modes ALARM NORMAL and NO RECORD
3. Battery is dead Please change Question Why the Stop recording on the tool bar by click right mouse button does not work how to stop recording Answer The Stop recording by the right mouse button is only suitable for Manual recording It can t stop recording when it s in start recording or the video in video plan If you want to stop recording please set the time is not recording Question Motion detection is not working Answer The setting of motion detection area is not correct Sensitivity is too low Question Remote control cannot work Answer The address of remote control is not correct 49 User Manual The distance of remote control is too far or the angle is too biased Remote control batteries run out Remote control is damaged or the front panel of DVR is damaged 12 Question WEB cannot login Answer Please check the network to see if it is connected Check if LINK or 100M LED is displayed normally on the panel use ping xxx xxx xxx xxx DVR IP to check if the Internet is linked properly Recommended to use Windows XP or Vista operating system also use IE6 0 browser or IE7 0 browser ActiveX control has been blocked Please manually install ActiveX control again Please install DX8 1 and upgrade your video card driver 13 Question There is no picture or picture is not clear when you preview the recording or playback the recording via IE Answer If you
4. enabled User can setup start time and end time of DST For example as following FIG start time is at 10 00 00 o clock from Sunday of the first week on Fig 2 28 January and end time is at 20 00 00 o clock from Sunday of the second week on February C User Click System settings System User to enter User authorization menu shown as SER TON x1 Fig 2 29 HIE LB LH ELLELE This option allows user set the device ID for the DVR and set the system password if you want to The new passwords will be available after clicking APPLY button When user sets Password enabled to Fig 2 29 ON you can setup a user password and administrator password respectively The password supports up to six characters If password is enabled you have to input password when login Remark When password is enabled the user password and admin password must be setup simultaneously DEFAULT USER PASSWORD 111111 DEFAULT ADMIN PASSWORD 000000 If forget your password please make the jump J16 on main board short for about 5 seconds when machine works user can access system menu to change password 23 User Manual again D HDD Click System settings System HDD HDD MANAGEMENT x Lu ul to enter HDD management menu shown mT o 5000 1086 Disk as 2 30 STATE There are three available status
5. in the video preview interface 2 You must format the HDD in the DVR before first using The steps as follows System settings SYSTEM HDD management format After formatting for the first time the system will restart 3 it means DVR is recording 2 SYSTEM LOGIN 1 Click right key of mouse once on live view the screen will display as following tool bar DN Remaining Hours of HDD System time User Manual 2 Double click right key of mouse on live view the screen will display as following tool bar MANUAL REC STOP MANUAL REC When you want the system recording click MANUAL REC button to start manual recording If you want to stop manual recording click STOP MANUAL REC menu or press e button KEYLOCK If the password is enabled click KEYLCK to logout the system PTZ Entering into PTZ control AUTO SEQUENCE Click AUTO SEQUENCE on tool bar to enable auto sequence the display will be image sequence channel 1 channel 2 channel 3 channel 4 channel 1 the channel of no image won t display On auto sequence user can press any button or click the mouse to intermit auto sequence EZOOM Click EZOOM system will enter into zoom mode drag left key of mouse to select an area of frame that user wants to zoom Click right key of mouse to exit PIP 1 1 In a full screen display a small picture PIP 1 2 In a full screen display two small pictures VO SWITCH On live view press the but
6. AVI H 264 NEI WORK Embeded DVR AVI7D1004 AVI7D1008 USER MANUAL Thank you for purchasing our product we will provide you the best service The specification maybe concludes the insufficient point on technology or the function is not the same with its operation the wrong spelling word We sincerely hope you can reflect your advice or opinion to us we will make the improvement on the product according to your valued advices The contents of this Manual are subject to change without notice User Manual CONTENT CUIR CUCUTE uuu 3 1 1 ENTIRONMENT ADAPTAEBILITY annassa 3 F TTESTYUP eee ee 3 J Iii oone 3 1 4 PRODUCT SPECIFICATION 3 2 DEVICE OPERATION MANUAL uu u u p ELEC iE ainsi cu n ituri nM A IE UL 5 UNE uu d B PP YIE 5 gt 5 2 1 2 REAR PANEL Details please refer to the real product 6 RLSBEMDUOIELUNMIMUL esi rer ee T NE NOUSE UFER TON eaaa aaa 8 TOTI I ALLATI N baan EEA 8 OSC IP 9 OPERA TIP nee rere gt 10 K c Um gt 10 e S EIC ETING T TURNER 12 NEGUONDI idi ht rd 12
7. O input level from low to high Set to N C if you use external sensor alarms that are normally closed OFF to Off if you are not going to use external sensor alarms 5 HDD LOSS means it will trigger an alarm if there is no HDD and an icon 6 Will be displayed on the left bottom of channel 1 in the live view HDD FULL means it will trigger an alarm if the HDD is full for recording VIDEO LOSS means it will trigger an alarm when one channel has no video input and it will display video loss in live view Alarm Action OUTPUT When an alarm is triggered the I O alarm output time will be OFF 5s 10s ALARM ELTE ON 305 605 SED DURATION It sets the record time of MIN BED F activated duration after alarm recording is Fig 2 45 Fig 2 46 User Manual Value at 73050 1min 2min and 5min BUZZER Buzzer calling time setup when alarm is triggered OFF 5 seconds 10 seconds 30 seconds and 60 seconds PRERECORD It sets the record time of duration before alarm is activated Preview recording time setup OFF and 10 seconds Motion Detect Move the cursor to IMOTION Icon highlighted when selected press 1 to MOTION DETEDTIOM SETUF HANNEL Fig 2 44 access setting interface shown as SENSITIV MEDIUM SWITCH Each channel has corres
8. me when this connection has limited or no connectivity Fig 3 4 Step 4 Double click Internet protocol TCP IP Fig 3 5 35 User Manual User Manual Internet Protocol TCP IP Properties General Y ou can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Obtain an IP address automatically Use the following IP address IP address 192 168 0 123 Subnet mask 20 25h 255 Default gateway 192 168 0 1 Use the following DNS server addresses Preferred DNS server Alternate DNS server Fig 3 5 Step 5 Examine the IP address subnet mask and default gateway on the PC Parameters in Fig 3 5 vary according to specific user s using conditions Step 6 Set corresponding IP address subnet mask and default gateway on the DVR refer to 2 2 9 Network A Network Setup Wherein the subnet mask and default gateway on DVR are the same with those of the PC and the IP address must be in the same network section but can not be the same with the used one Otherwise it will cause IP address conflicts Take the figure above as an example the IP address should be 192 168 0 X wherein X can not be 40 or 1 including other IP addresses currently being used and can not surpass 255 the subnet mask is 255 255 255 0 and the gateway is 192 168 0 1 3 4 CONRTOL DOWNLOA
9. 15 2 2 5 PLAYBACK WITH BACK UP VIDEO DATA 15 CELER PTT SUTIY L _________ ___ 17 2A T RECOPD RUPEE 19 _ _______ gt 20 22 VP _ __ 25 CB RETAIL SETUP EMPTORE 29 PURA ud T ____ __4 32 110 32 PE EOP n am ny ete err ae 32 3 2 NE TWORK SECURITY SETTING t adus iac 32 S CONNECTION SETTING ERROREM 34 3 4 CONRTOL DOWNLOAD AND 36 INTERFACE ree een creer rere E en eran errr Terres 37 SENSUS Luya uma F aaa Ln 37 SOEPEL 6 a 39 INSTRUCTION OF TUUL BAR uU uy 40 SOS GETTIN anna 41 RE 45 LP 46 User Manual 1 INTRODUCTION 1 1 ENTIRONMENT ADAPTABILITY For the safely using DVR and prolong device life please pay attention on following gt When installing device please comply all the electric product safety criterion Power and ground Do not touch the power and DVR with a wet hand Do not drop liquid on DVR Do not put any object on DVR Please use soft dry cloth to clean DVR
10. 29 24 EI 14 29 23 14 47 55 14 29 24 14 47 55 14 29 24 14 47 55 14 47 55 15 18 08 Lg Fig 3 12 Double click one of the listed recorded video to playback Or select one of the listed recorded video and click the button PLAY to playback The file icon will change to gt DOWNEORD The user can download files on PC and save them to HDD for backup or play Download file format is AVI file 3 5 3 INSTRUCTION OF TOOL BAR 40 User Manual Pla top Fast play Volume Control Pause Slow play Single frame 3 5 4 REMOTE SETTING Click Remote Setting to enter into setup interface this interface includes record alarm PTZ network advanced and system information six menus A Encode Setting Click Encode Setting Video Para to enter into setup interface shown as Fig 3 13 User can adjust recording parameters resolution quality and frame rate for each channel remotely via net viewer Z VIDEO PARA REC PARA RESOLUTION QUALITY FRAME RATE Fig 3 13 B Record Setting Click Record Setting to enter into the menu interface shown as Fig 3 14 user can select on off for each channel and adjust recording parameters audio pack time REC mode and REC schedule remotely via net viewer 41 dis RECORD SETTING E F n Alarm Setting User Manual REC CTRL PARA REC ENABLE AUDIO ENABLE UNIT OF PACK MINUTE TIMER REC SCHEDULE REC TY
11. Motion Detection setting interface you can use the left key to drag the frame to set the motion detection area 2 1 5 HDD INSTALLATION Please installation the HDD as the following steps 1 Open the cover of the DVR and then you will see one HDD plate User Manual 2 Connect HDD line as Fig 2 4 Fig 2 4 3 Affix HDD on HDD plate with the screws around and close cover Notice Newly installed HDD should format first before recording 2 1 6 MENU TREE You can control the DVR by the menu operation The following tree diagram shows the menu structure and more details will be shown in next chapter SYSTEM SEITINGS PLAY 2 STOP MANUAL REC MUTE ON MUTE TOOL 7 00 SUE P Fd A VO SWITCH User Manual 2 2 SYSTEM OPERATION 2 2 1 USER LOGIN 1 START UP Connect the DC12V 3A adapter to DVR When start up the DVR IPOWERI LED will be on and 4 images will be display on the screen If it has setup ignition recording or time recording the system will record automatically and the corresponding LED will be on and the system work normally shown as Fig 2 5 No signal Fig 2 5 Remark 1 If there is no HDD in device or the device didn t read the HDD or a new HDD didn t be formatted or there is no space of the HDD to record it will display an icon
12. Options in the main interface include LIVE REPLAY REMOTE SETTING LOCAL SETTING and LOGOUT Click any option to access 3 5 1 LIVE Click Live to enter into the interface as follows shown as Fig 3 8 37 User Manual A 01 14 2010 02 34 32 0171472010 02 34 32 CH1 c ___ PLAY CONTROL Cu i PTZ CONTROL 7 v 01714 2010 02 34 32 Play Control Move cursor to the icons it will highlighted when selected Connect all windows or disconnect all windows Capture picture save in local disk system save default path is c DVR BACKUP Quick start to record video on all channels The left upper corner of each channel has normal recording video symbol Click icon to switch between single screen n ad g full adjust button B Other Operation 1 Select channel at preview screen the selected channel s frame will be change to blue double click left key enter to the selected channel single screen display 2 Click one channel via left key at preview screen then click right key will occur window shortcut Menu shown as Fig 3 9 38 User Manual El CONNECT m DISCONNECT El CONNECT ALL Bl DISCONNECT ALL El START RECORD E STOP Fig 3 9 You can open shut down and start this channel s record via shortcut menu 3 Click right key at one live view screen click connect all or d
13. Restricted sites Internet This zone contains all Web sites vau haven t placed in other zones Security level for this zone Custom Custom settings To change the settings click Custom Level use the recommended settings click Default Level Fig 3 1 3 Click Customization level to enter into the security setting Fig 3 2 Security Settings Settings dd Automatic prompting For Activex controls 9 Disable Enable 5 Binary and script behaviors C Administrator approved Disable Enable i Download signed Actives controls Disable Enable B Prompt 4 Download unsigned Actives controls far 11 i Reset custom settings Fig 3 2 Set the ActiveX control and pluggable unit ActiveX control auto prompting Run the script of the ActiveX control which is marked to be that can safely implement 33 User Manual the script Implement initialization and run the script of the ActiveX control which 15 not marked to be that can safely implement the script Binary system and the script behavior Download the unsigned ActiveX control Download the signed ActiveX control Perform the ActiveX control and pluggable unit It s extremely importation to enable the items above Prompt Before control installation please turn off the fire wall and the anti virus software 3 3 CONNECTION SETTING The remote access for the hard d
14. do not use chemical impregnant The Device will have voltage before startup if the power line is connected to power source Please unplug power line from power source if the Device will not be used for a long time 1 2 MAIN FEATURE 4 channel CIF HD1 D1 resolution digital video recorder It has local recording playback support treble code remote network surveillance data backup parameter setting motion detection and USB mouse 1 3 PRODUCT FEATURES lt gt lt gt lt gt lt gt lt gt lt gt lt gt lt gt lt gt 1 4 264 compression triplex real time industrial DVR Two USB interface one for data backup one for mouse operation 3 5 SATA HDD Special file system for security Show Remaining hours of information on status bar Support four channel simultaneously playback Support 3G mobile phone surveillance and E mail function Support daylight saving time PIP and EZOOM function Support the live view parameter setting and copy playback video via network 4 PRODUCT SPECIFICATION PARAMETERS Specification System language OSD Menu password user password administrator password User Manual Video 4 composite video Input 1 0Vp p impedance 5Q impedance75O BNC Video display 4ch 1 4channel switch Video standard PAL 251 5 CCIR625line 50scene NTSC 301 5 CCIR525line 60scene Audio Audio input 4ch audio input iimpedance600O0 RCA Audio ou
15. 65 SMTP indicates server address you use Sender indicates sender s email address The email address should be consistent with the server you use That is to say when you use email address abc gmail com the according server should be smtp gmail com Receiver Email indicates receiver s email address The email address is used to receive image transmitted from motion detection alarm of DVR Please clear the images you have received as soon as possible to avoid overloading your email account Interval It s the interval for sending email include 5s 10s 30s 1minute and 3minutes For detailed SMTP protocols settings refer to the Fig 2 40 DI B Lee diini LET Hiri Peet tuk Mie ee dae ee Gin Wari setting Check Gem Account Bk Fiber Myleker Otherinbox EBookgMal z From bone Register mailbox ecoourd muB Dag SE e o _ _ oM ee Pe _ cred TB Far rra sr rarkTuT TU m Accourd security irc Dad a pae basa i merer Dus Faser Cr L POP IMAP z Grable FORT ieee Tal Eruablan TMA SMTE Cum Fig 2 40 28 D Mobile Setup MOBILE MONITOR FJ 5961 3 Move the cursor to selected press Fig 2 41
16. D AND INSTALLATION After finishing the aforementioned settings open the IE browser input http 192 168 0 X 192 168 0 X is the setting IP address of the DVR and confirm If the http port of DVR setting has been changed not 80 it s will be must to add colon port number assume that the current port number is like http 192 168 0 X P for correct visit Then please click If your browser does not support the ActiveX to download please click here the network will download and install the control automatically Fig 3 6 36 User Manual When the net is connected IE will automatically download the file to PC as follows 2 Web Application Manager Microsoft Internet Explorer Fle Edt Wew Favortes Tools Hep 2 Search Favorkes Se EM L E 192 168 0 100 P Fig 3 6 System will automatically enter GUI as follows Fig 3 7 USER LOGIN NETWORK INTERNET X LOGIN RESET Fig 3 7 Select English interface from the top left side Input correct password if password is enabled to enter the system The password is the same as the one set in DVR PASSWORD Administrator has all authorities operator has limited authorities whom can only watch playback please change the unit No and default password in time for system security NETWORK LAN WAN Remark If you connect the device in WAN the IP should be a public IP 3 9 OPERATION INTERFACE
17. DVR remotely via network NETWORK 1 When selecting static allocation STATIC 09000 WEB PORT 00080 00 11 22 38 64 D5 mask gateway and web port Fig 2 192 168 001 107 you need to setup IP address subnet 255 255 255 000 S 122 188 001 001 PORT Transfers video data between 182 168 002 001 l client and device WEB PORT Setup the port of IE browser via HTTP IP ADDRESS Setup the IP address and press Enter input numbers to fill IP address SUBNET MASK Press Enter input numbers to fill net mask GATEWAY Press Enter input numbers to fill default gateway 2 When selecting PPPOE you need to input PPPOE USER and PASSWORD provided by ISP supplier shown as Fig 2 37 PORT Port for private protocol of DVR and PC default 9000 If this port of computer is NETWORK SETUP applied by other server please PPPOE 08000 WEB POR 00080 00 11 29 38 84 D5 WEB PORT Http port Default 80 If 25051244582150163 gd change to other free port admin change WEB port to e g 8088 Connect ing port No should be added behind IP 192 188 002 001 http 192 168 15 145 8088 should input into IP of IE Fig 2 37 IP address Fill in IP address according to the net of DVR PPPOE user and password Enter the username and password provided by the internet service Apply and the system will be reboot automatically After rebooting the device will save it and set the PPPOE a
18. IH Info Time Point Record Alarm Motion 10 06 10 08 59 58 Wo JAlarm Motion 10 06 10 08 00 00 Alarm Motion 10 06 10 09 00 28 Alarm Video loss 10 06 10 09 00 50 Alarm Motion 10 06 10 09 47 27 No Alarm Motion 10 06 10 09 47 34 Fig 2 12 You can use USB for backup by inserting USB device into the 0582 0 port before backing up files It also supports USB OTG Warning Progress T total 1 file HsPlayer 2 8 0 NE On FILE LISTING menu you can select the g S Dy QIICCOLOII ACYo press Enter means the selected is confirmed meee ected in the v will the ill prompt ble click the User Manual Minimize the window Maximize the window Close the Window Open Capture Slow Play Fast Mute Volume Slide Setting Previous Frame Next Frame 2 Click to open the video recorder in or 264 format shown as Fig 2 15 Select file and click the button Open to playback shown as Fig 2 16 0570672010 08 59 59 L lt 4 ch00000000000002 100614 032345 29 100000000000002 100614 092956 ch00000000000002 100614 033004 Filename _ ch00000000000002 100613 103110 Files of type Media Files avi mp4 asf 264 Cancel Open as read only Fig 2 15 3 Click 10 to still capture User can click to enter into menu interf
19. OVERNAME AUTO OK un format No Disk If HDD cannot run normally including unformatted and no HDD there will be a icon displayed on video live view If a new HDD is used on Fig 2 30 the DVR for the first time will restart after the HDD is formatted _ TOTAL FREE Indicates total space available and unused space available on the hard drive disk FREE TIME Indicates remaining recording time of the HDD OVERWRITE Includes CLOSE AUTO 1 HOUR 3 HOURS 1 DAY 12 DAYS 7 DAYS 30 DAYS and 90 DAYS If user chooses CLOSE the recording stops when the hard disk drive is full It won t record until overwrite is enabled If user chooses AUTO recording continues and overwrites previous recording when hard disk drive space is full If user chooses 2 DAYS recording will be continuance for two days at most And recording will be overwritten after two days The other options are similar to the option 2 DAYS FORMAT Move cursor to select device and press APPLY to start formatting FORMAT USB User can format USB device directly Volume 3 Click System settings System mr Sy gs Sy Volume to enter volume menu 37 o 1 m1 shown as Fig 2 31 Press 4 or P or directly drag the cursor to adjust the volume move the cursor to Ed to save Maintenance Click System settin
20. PE ALARM NORMAL QNO Fig 3 14 Click Alarm Setting Device Alarm to enter into setup interface shown as Fig 3 15 Click Alarm Setting I Channel Alarm to enter into setup interface shown as Fig 3 16 User can set up alarm event types also can set I O alarm for each channel motion detection alarm motion area motion sensitivity alarm out time buzzer time pre REC time and post REC time DEVICE ALARM EVENT TYPE ENABLE m Fig 3 15 42 CHANNEL EVENT TYPE CHANNEL ALARM ENABLE MOTION SENSITIVITY OUTPUT ALARM OUT TIME PRE REC TIME D PTZ Setting User Manual CHANNEL1 I O ALARM SECOND BUZZER TIME SEC SECOND POST REC SEC Fig 3 16 Click PTZ Setting to access setup interface shown as Fig 3 17 User can setup PTZ parameters remotely and methods are the same as local DVR setup PTZ CONTROL BAUD RATE DATA BIT STOP BIT VERIFY E Network Setting 2400 Click Network Setting Network to access setup interface shown as Fig 3 18 The menu allows user to set a lower bandwidth for Internet video transmission Click Network Setting Mobile to access setup interface shown as Fig 3 19 Click Network Setting Email to access setup interface shown as Fig 3 20 User can setup network parameters and methods are the same as local DVR setup 43 BASIC ATTR IP ADDRESS PREFERRED DNS MEDIA PORT GATE
21. STEM NETWORK DIAGRAM Example 4channel 46 User Manual Video in Video in Video in Video in Audio in USB Backup P Audio out oF El s u Switch x Internet Notebook Mobile surveillance 5 FAQ If your problem is not listed below please call our toll free number for more support 1 Question DVR is not working after starting Answer Check the adaptor input Check the on off power line is it well connected Check the power on off Check the upgrade procedure Check the main board of DVR 2 Question DVR is rebooting automatically or stopped after starting the DVR for several minutes Answer Instability or low input voltage 47 CO Co Co r3 User Manual Bad track hard drive or the line of hard drive is bad On off power supply is not enough The front end video signal instability High temperature too much dust too bad the DVR operating environment The main board is not well connected with other boards The hardware of DVR is defective 3 Question No output of single channel multi channel or all channel video Answer Please check the adaptor of camera whether to see if it is well connected Please check the cable connecting video input output in the back panel of DVR Please insert the video source directly into the display device and check If they are causing the problem Check the brightness of the pictu
22. WAY PPPOE ENABLE USER NAME DDNS ENABLE SERVICE USER NAME MOBILE ENABLE MOBILE PORT NETWORK TYPE EMAIL ENABLE EMAIL SETTING SMTP SERVER SENDER ADDRESS 1 DHCP 9000 192 168 1 1 Fig 3 20 44 NETMASK WEB PORT INTERNET BANDWIDTH PASSWORD HOST NAME PASSWORD zxw2010 3322 0rg SEND INTERVAL STMP PORT PASSWORD User Manual User Manual F System INFO Click System INFO Version INFO to access setup interface shown as Fig 3 21 Here user can check device ID and software version Click System INFO HDD INFO to access setup interface shown as Fig 3 22 Here user can check HDD state total size of HDD and free size of HDD VERSION INFO DEVICE NAME DEVICE SN DEVICE TYPE DEVICE ID HW VERSION SOFT VERSION APP VERSION HARD DISK INFO LIST NUMBER DISK STATE TOTAL SIZE DISK FREE SIZE NORMAL 10401M l 500107M 2 NO DISK Fig 3 22 3 5 5 LOCAL SETTING Click Local Setting to access setup interface shown as Fig 3 23 User can setup the save path for local setting Record save path is for recording Frame save path is for capture and File save path is for download Click the button to setup save path 45 User Manual s p S Y z C Documents and Settings Administrator Desktop FRAME SAVE PATH FILE SAVE PATH c DVR download Fig 3 23 3 5 6 LOGOUT Click Logout to log out of the system 4 SY
23. access DVR by IE please choose Wan in web environment Please try Close windows by the right mouse button and try Open windows again 50
24. ace to set up the path for saving captured images shown as Fig 2 17 Click Browser to change the path for captured images shown as Fig 2 18 For example select the 16 Fig 2 18 User Manual folder Desktop and click OK to save the path Fig 2 17 Browse for Folder Pleae select the Folder Documents 188 Computer Local Disk 7 7 gt we Local Disk D gt Sat Local Disk E gt Local Disk F b 2 DvD RAMF Drive G0 gt d DVD Drive H wt A DATA UFD T wt Removable Disk 2 7 gt Control Panel 07 Shared Mnri menka x 2 2 6 PTZ Control Setting PTZ parameters in chapter 2 2 12 PTZ Here we will discuss how to operate PTZ control A Connection 1 Connect the control line of ball machine to RS 485 interface of DVR Pay attention to and B matching order 2 Connect the video line of the ball machine to video input of DVR 3 Electrify the ball machine B Preparation 1 Set the control address of ball machine and choose relevant control protocol 2 Switch the current frame to the corresponding display channel C Operation Double click the right mouse button to enter tool bar menu under real time monitoring frame and choose PTZ or push ENTER key to enter the control frame shown as Fig 17 User Manual AUTO SCAN Preset Z00M Speer Dutton or single click the right mouse there will
25. an use mouse to make operation of the menu besides IR remote controller and front panel buttons The operation is the same as PC Windows Please inserts the mouse into USB port Click right In live display mode clicking right key will display tool bar or hide tool key bar In main menu or sub menu mode clicking right key will exit current menu It will not save the settings if clicking the right key to exit Click leftkey menu unlock mode in the tool bar click left key at SYSTEM SETTINGS icon to Enter into main menu directly After entering main menu clicking left key could enter into any sub menu On detail files menu mode clicking left key could playback one recording file By clicking left key you can select values in edit boxes or down pull menu and supports Chinese word input special symbol numeric and character input On the playback interface click the left key can make gt gt forward function lt lt reverse function gt gt Slow play function I frame play function gt Play function X exit function By clicking left key you can adjust color control bar volume control bar and screen control bar On main menu sub menu or playback view click x to exit current menu by clicking left key Change the status box of check box on motion detection area Double click On the live view or playback video double click the left key will left key maximize the screen Mouse Select menu item In the
26. be anicon on the top right corner of the screen PTZ Direct Control Under PTZ control frame move the mouse to the upper lower left and right locations of the current frame and this time single click the left mouse and hold the mouse the control of corresponding location can be entered During mode the detection control can be done through the mouse control or through V 4 44 gt gt buttons of the remote controller front panel SPEED Regulate the rotating step length of the PTZ through a slide bar mainly for the controlling of direction operation The bigger the value is the faster the rotational speed is value at 0 63 IRIS IRIS Regulate the diaphragm FOCUS FOCUS Bring into focus finely ZOOM ZOOM Lens zooms in and out Magnification can be changed by using the mouse wheel under the current frame Clear preset point Start Stop Set preset point Call preset point AUTO SCAN P D WEM Switch control channel l machine at left and right boundary after starting Limit Scan run control the limit scanning of the high speed dome after starting Patrol can run the patrol scanning of the high speed dome after starting Pattern can run the pattern scanning of the high speed dome after starting Menu CTRL gt can call the menu of the high speed dome after starting After enter into the menu of high speed
27. conds Fig 2 25 21 User Manual 2 2 9 SYSTEM Move cursor to select SYSTEM Icon highlighted when selected and press to enter into the system setup interface shown as Fig 2 26 oo TEN ENGLISH Fig 2 26 System language is optional support multi language You can choose the language you want to OUTPUT Adjust system output to be consistent with camera input including PAL or NTSC Remark The device will restart when you modify the camera mode Time Setup Click System settings System Time to enter Time setup menu shown as Fig 2 SETUP x 27 06 10 2010 MM DD YY DATE Setup system date via numeric 14 34 47 Key 24 HOUR DATE FORMAT Press ENTER to switch the date patterns there are YY MM DD and MM DD YY for your Fig 2 27 selection TIME Setup System time via numeric key TIME FORMAT Press ENTER to switch the time patterns there are 12 HOURS and 24 HOURS for your selection 22 User Manual Remark You must press APPLY ito save after you modify the time and date modification will not be saved if you exit directly B DST Click System settings System DST to enter DST menu to setup DST daylight P Daylight Savings 081 ON as Fig 2 28 means DST is 20 FEB 2nd WEEK saving time status and mode shown
28. ded file If setup as off it will not display time 4 During playback press gt play slowly press gt OLI lt lt to forward play and reverse play press gt playback and return to the former menu to pause and frame by frame play ress to exit from X 5 When playback files finish it will return to the file list interface 2 2 4 LOG SEARCH Move the cursor tol gt Icon highlighted when selected click left mouse to enter into the REC SEARCH setting interface or press the button to enter into the setting interface move the cursor to option LOG and press the ENTER button or click left key of mouse to access as figure below Display the system log for the convenience of alarm and operation LOG TYPE All ALARM and OPERATION are optional User Manual STARTING TIME Set the starting time of log search END TIME Set terminal time of log search Push Search button after the setting of log time quantum and type and the system will display the required log in the list Click First Prev Next Last to switch page and through the option Export to save the log list to USB disk pe U JH TYPE ALARM 2010 08 10 2010 06 12 Fig 2 11 2 2 4
29. dome use IRIS to confirm and IRIS to cancel and through click left mouse to move the cursor up or down Notice Operating functions need to be supported by head end equipment and matched with the protocol PRESET Adjust the direction and angle of the camera and input corresponding presetting point numbers and then click button thus the presetting point number of the menu 15 set Input the presetting point number and click L button the camera will be switched to the corresponding location of presetting point automatically User Manual 2 2 7 RECORD Move the cursor to RECORD Icon GH1 ENABLE GOOD Press enter the setting CIF 25 interface shown as Fig 2 20 You highlighted when selected PEN SCHEDULES can use direction keys and cursor to 80 MIN x change the options CHANNEL Include CH2 CH3 and ALL please select the Fig 2 20 channel you need to setup RECORD ENABLE Means the channel is enabled for record BITRATE There are three options GOOD NORMAL and LOW corresponding to HIGHEST HIGH and NORMAL data stream standard The bit rate of each channel for recording can be adjusted independently RESOLUTION Setup resolution and code rate for recording there are three options D1 HD1 CIF resolution The resolution of each channel for recording can be adjusted
30. em settings Video Color to enter Color setup menu User can adjust image hue brightness contrast and saturation parameters of each channel shown as Fig 2 23 Press 4 key or directly drag the cursor to setup colors if clicking DEFAULT button color parameter values will be reset to default value press APPLY to save the parameters once the setup is completed Live ON Fig 2 23 Means the channel is allowed to view the live mode OFF means not Audio User can set up audio input for current channel The option includes UNBIND ICH1 I CH2 ICH3 For example current channel is CH1 if AUDIO is UNBIND there will be no audio CH1 if AUDIO is CH2 there will be the audio of CH2 for CH1 RECORD TIME You can define which information will be recorded onto the video as the OSD On Screen Display string Video margin Setup Click System settings Video Margin to enter Video margin setup menu shown as Fig 2 24 You can move the entire video screen up down left and right using this option Video Setup Fig 2 24 Click System settings Video Video Setup to enter Video Setup menu DISPLAY SETU J as Fig 2 25 CONS 1024x768 VGA resolution Options include O 1024 768 and 1280 1024 HZ Poll Time It s the sequence time when auto sequence is enabled Value is at 1 300 se
31. for recording Different color means different record mode Red means alarm record Green means normal record Grounding means no record To setup weekly schedules click on the box of the recording status you want Alarm Normal or No record Fig 2 21 and then click on each box in the schedule time line that you want this method to apply to Also you can use the left key to drag the frames on boxes in the schedule time line that you want to You can use the FROM TO pull down menus and COPY button settings from one day to another day or all days After you complete the schedule you activate it by clicking the APPLY button PACKTIMEG There are 15min 30min 45min 60min four options it will pack as the mode you selected when alarm record is disabled REC SEARCH Refer to 2 2 3 RECORD SEARCH Scroll to APPLY and press ENTER to save the new settings 2 2 8 VIDEO Move the cursor to VIDEO Icon highlighted when selected Press Enter to enter the setting interface shown as Fig 2 22 You can use direction keys and cursor to change the options CHANNEL You can select one channel to set up User Manual NAME User can modify camera name of each channel that user wants to Please note that the name of each channel supports up to nine character or four Chinese characters POSITION Name location is optional You can press Enter to switch from U L D L U R D R and OFF Color Setup Click Syst
32. gs System Maintenance to enter Maintenance menu shown as Fig 2 32 3 AUTO MAINTAIN When it is on you AUTO MATNTATN can setup the time device to restart ruga DAY And the system will restart automatically TOMO 20 00 at the time according to the parameter Fig 2 32 Fig 2 34 Fig 2 33 User Manual SYSTEM UPDATE New a root directory naming dvrupgrade of a thumb driver copy the update file to it and then insert it into USB port Press Enter to upgrade the firmware and it will display the process of the system upgrade as Fig 2 33 Warning Upgrading don t remove USB Do not power off The system upgrade will require more then two minutes Complete upgrade DVR will restart LOAD DEFAULT Restore all the settings to factory settings REBOOT You can restart the device Information Click System settings System SYSTEM INFO Information to enter System INFO menu shown as Fig 2 34 This interface includes device type software version and release date 2 2 10 NETWORK Move the cursor to NETWORK Icon highlighted when selected press Enter to access setting interface shown as Fig 2 35 User can setup network DDNS email and mobile Fig 2 36 User Manual Network Setup After selecting network mode such as static DHCP and PPPOE allocation and setup web port you could visit
33. ifferent PTZ two protocols for your selection Default is PELCO D BAUD RATE Select the different baud rate for your PTZ there are 1200 2400 4800 and 9600 DATA BIT There are 5 6 7 8 options to select default setting is 8 STOP BIT Two options 1 and 2 for you selection Default setting is 1 PARITY Options None Odd Even Mark Space are available Default setting is none CRUISE Includes ON and OFF ADDRESS Fill in the code of respective PTZ Please note the above mentioned channel setting must match the settings of the PTZ camera 3 IE OPERATION 3 1 FEATURE Install the software through the IE browser of OS and you operate the network remotely and conveniently DVR supports C S B S and visit in LAN and WAN also supports IP and domain name visiting RESTRICTION CONDITION To ensure PC s stable visiting of DVR recommend Windows XP Windows Vista operation system recommend browser as IE 6 0 IE 7 0 3 2 NETWORK SECURITY SETTING Prior to control installation please program the network security level by the following operations 32 User Manual 1 Open the IE browser to choose the Internet option in the Tool menu 2 Choose the Security label in the appeared dialogue box Fig 3 1 Internet Options General Security Privacy Content Connections Programs Advanced Select a web content zone to specify tts security settings o amp o e Localintranet Trusted sites
34. ing status of that day the searching result will be showed in the below date frame DATE It will show all the recording status in this day you can playback the recorded files in any period by clicking the corresponding period Method 3 playback by file list Input the searching date click and you can see the recording status Click an exact day and then click FILE LISTING and then you can see the interface of FILE LISTING TYPE There are all normal and alarm totally options Press Enter and the content will be displayed in a list SIZE m L User Manual x SELECT OM Norma ABE Alarm BM Norma 6 0M Alarm E Norma 1 AN Alarm Instruction Fig 2 10 CHN is the recording file belongs to the corresponding channel 1 OFILE LIST TIME is the recording time of this file SIZE is the displaying size of this file Unit MB TYPE is the displaying type of the recording file there are two types normal and alarm Pressing SELECT button will export the selected files to USB storage 2 After moving the cursor up or down and selecting the files left click to enter into playback interface It will playback full screen of single channel If setup as in the RECORD TIME in VIDEO DISPLAY it will show the date time when playing back recor
35. ion 1 USB port Copy video record and mouse connection via USB port EN __ and change new one if the fan has some problems Sensor Alarm RS 485 port functions Pin 1 G Sensor 1 input Pin 2 G Sensor 2 input Pin 3 G Sensor 3 input Pin 4 Sensor 4 input Pin NO COM Alarm Output N O Pin A Pin B RS 485ALRS 485B In device operation the enter key on remote control or front panel has the same function User Manual as left click of the mouse 2 1 3 REMOTE CONTROL 006 Fig 2 3 You can use the remote control instead of the buttons on the front panel With nothing blocking the way between you and the video recorder the range of the infra red remote Is up to 10 meters Operating instruction Reverse playback 2x 4x and 8x playback A N Access tool bar Hide tool bar exit menu exit sub menu Move selected item in menu Corresponding channel is magnified in full screen under preview state Play Pause Stop playback Fast playback 2x 4x and 8x playback Start manual record Stop manual record User Manual 4 Channels preview switch control mode during PTZ control frame This button is used as the enter key in most circumstances 2 1 4 MOUSE OPERATION You c
36. isconnect all will quickly open or close all windows 3 5 2 REPLAY 0671272010 13 48 01 CH FILE LEESI ALL CHANN E ALL TYPE 12 00 00 12 47 54 12 00 00 12 47 54 12 00 00 12 47 54 12 47 55 13 10 01 EI 12 47 55 13 1 0 01 55 13 1 0 01 FET 1 10 01 13 47 55 X 13 10 01 13 47 55 Y 13 47 55 14 23 23 l 2 3 1 e 3 1 2 J 1 E 13 47 55 14 29 24 E 14 29 23 14 47 55 14 29 24 14 47 55 E 14 29 24 14 47 55 Ek 14 47 55 15 18 08 i k Lu Fig 3 10 Click right up of calendar interface gt to setup the month for searching click REFRESH at the calendar interface will display the recording information of current month shown as Fig 3 11 39 User Manual June 2010 Fig 3 11 The highlighted date indicates video was recorded that day click the date will search that recording file list For example the above picture display June 12th 13 have recorded video when it shows on bold and current search date is June 12 Select channel and type at the bottom of the calendar Click SEARCH and the result will display as follows shown as Fig 3 12 FILE Sm IM 12 00 00 12 47 54 12 00 00 12 47 54 12 00 00 12 47 54 EE ERAS KB EU E 12 47 55 13 10 01 SEE EU 67 13 10 01 13 47 55 MERRIER FEL EY 13 10 01 13 47 55 SEEK hj t wre EY 13 47 55 14
37. isk recording machine should be carried out through the network In the local area network connection the IP address of the client side computer must be in the same network section with that of the hard disk recording machine While in the wide area network connection just ensure that two sides can visit the public network and carry out connection through the IP address or the dynamic domain name The following will mainly focus on the connecting and setting method for the local area network Step 1 Click Network neighborhood with the right key of the mouse and click Attribute in the ejected menu to open the Network connection Step 2 Double click to open Local connection Fig 3 3 34 Local Area Connection Status General Connection Status Duration Speed Activity Sent Packets 30 343 Fig 3 3 Step 3 Click Attribute Fig 3 4 Local Area Connection Properties General Authentication Advanced L onnect using Connected 00 44 11 100 0 Mbps Received 616 300 E Realtek RTL813329108 Family Fast E This connection uses the following hems a L Clien t for Microsoft Nebw ork S File and Printer Sharing For Microsoft Networks dal 055 Packet Scheduler Y Internet Protocol TCP IP Install Uninstall Description Allows your computer to access resources on a Microsoft network C Show icon in notification area when connected
38. ponding channel switch press Enter to turn on or turn off the motion detection for each channel SENSITIVITY Each channel has corresponding sensitivity setting including four standards Highest IMedium and Low press ito switch MD AREA Each channel has corresponding regional motion detecting setting move the cursor to corresponding setting press Enterito enter regional setting interface blue area means motion detection is activated 1 transparent block means motion detection MCN Is not activated Press the direction key on remote control to move cursor along the small pane position of cursor is indicated by green frame Press Enter to select or cancel motion detection of this small pane When setup is finished press single click right mouse to go back to MD setup interface and move cursor to APPLY to save settings Remark 31 User Manual Mouse operation Single click left mouse and drag the frame to setup the region for motion detection 2 2 12 PTZ Move the cursor to PTZ Icon highlighted when selected press Enter to access setting co D 9800 interface shown as Fig 2 46 You can setup the parameters for each channel separately CHANNEL The channel with PTZ connected PROTOCOL Select the protocol of d
39. re and bring it back to its original default setting video input signal too weak Display settings in the preview set to closed The hardware of DVR is defective 4 Question DVR cannot record after startup and the interface is showing Answer sure power adaptor is DC 12 Make sure HDD is formatted Check the power and data connection cables of the HDD The HDD is defective The SATA port is not working 5 Question DVR is having problem with real time images such as bad image color or serious brightness distortion Answer If PAL or NTSC is not correctly selected on the BNC output the images will be in black and white DVR is not compatible with monitor 48 10 11 User Manual The video transmission distance is too far The setting of DVR color brightness and so on is wrong Question No audio sound when monitoring Answer Check sound box or speaker functions Also check possible short circuit Audio source may be connected to the video channel You can click to full screen to check hardware of DVR is defective Question No audio sound when playing back Answer Setting problem open audio video item Check the audio to see if it is closed in playback interface Question System time is not correct Answer Wrong setting or user did not click APPLY to confirm Battery is not connected properly
40. s default network type The IP address will be automatically configure as dynamic IP of WAN 3 When selecting DHCP the server will allocate DVR IP address automatically 26 User Manual NOTE Save it when select DHCP and it will automatically connect with the server Will allot IP address when connect ok and the address will showed on the interface DDNS Setup Move the cursor to DDNS SETUP and press Enter to enter the interface shown as Fig DDNS SETUF ON org DEEH EMAIL SETUF ON 00465 smtp Gmail com buffalo814 Gmail com abeti ii ar 8 2 38 DDNS Options are ON OFF If there is a DDNS server sets up to Three options to select 3322 dyndns and perfecteyes HOST NAME Input the name of the host server USER NAME Input the name of the user PASSWORD Input the password C Email Setup Click the Email setup menu to enter into its sub menu shown as Fig 2 39 On the Email setup mode refer to its parameter setup shown as picture when setting email alarm to SSL SSL is a security link transport protocol You can encrypt your communication info including your email using SSL to prevent hackers from monitoring your email or communication info and even your password Please set SSL to On via Gmail com server and set to Off via other mail server If your se
41. ton ten times when there is no tool tar or click the button VO SWITCH on tool bar menu that can be operated will switch between CVBS video output and VGA video output 4 live view press the button twice or double click right key of mouse to select option SYSTEM SETTINGS T 3 tool bar it will appear the login windows if password is enabled shown as Fig 2 6 You can login from the LOGIN window as left Input password via numeric key board You can access to main menu by pressing Apply if the password is enabled Remark Default device ID is 222222 user password RE 111111 and Admin password is 000000 For your convenience and system safety you can setup the user password and change the device User Manual ID in the Setup Administrator has all authorities while common user has limited authorities to only watch and playback Device ID You can view the device ID as the right frame Password Enter the admin password or user password if password is enabled 2 2 2 SYSTEM SETTINGS The SYSTEM SETTINGS menu includes RECORD VIDEO SYSTEM NETWORK ALARM and PTZ shown as Fig 2 7 ENABLE 2000 CIF 25 OPEN SDHEDULE MIN Fig 2 7 Remark To make the setting of sub menu valid you must press APPLY It will not be workable if exit directly This DVR has a special feature Explanation and information will be showed automatically
42. tput 1ch audio output iimpedance600O0 RCA Record style Audio video recorded simultaneously compression proceeding compression Video code rate CIF 200fps 4ch HD1 100fps 4ch D1 50fps 4ch Connector 1 alarm output Support 1 RS485 545 10 100 others User Manual 2 DEVICE OPERATION MANUAL 2 1 PRODUCT OVERVIEW 2 1 1 FRONT PANEL 1 2 3 4 5 161718 19 6 7 8 9 310 11 12 13 14 15 Key Operating instruction Access tool bar Hide tool bar exit menu exit sub menu Corresponding channel is magnified in full screen under preview state 4 Channels preview switch control mode during PTZ control frame Move selected item in Reverse playback 2x 4x and 8x playback Play Pause Fast playback 2x 4x and 8x playback menu Start manual record stop manual record Infrared receiving window of the remote controller 13 lt This button is used as 14 RECLEDS Red LED is for record the enter key in most circumstances and PTZ control on 15 POWER Green LED is for live view LEDS power User Manual 2 1 2 REAR PANEL Details please refer to the real product Physical connector Connector descript
43. tting is still not right please contact the web site where you have applied for your email box to get SMTP server and SSL of mail box User Manual Document Phone Saes idyik apriti 1527 0254 er agn out Mail Filters Forwarding and Chat Web CH Detabla ferwardieg Ty ates C and Forward a el incoming io ad and beep Gesad s copy m the Inbox Ti Yoru also award only some of yow masi by a tt ane POP Download 1 Stanes Is enabled for oll mad that has armed Jan 7 rash oam mors C Enable POP for mail eves mail that s aleady been downloaded Erabi POP for mail that anives from naw on Disable POP Chai p 2 When messages are accested with POP karp copy in the libsu certh add ar invite 1 Configure your email client 5 Cutl k Eudora Mate a ETI T1 yang tak 1 Stati WAP E sen Gal meter MAP Chats are saved and mme C Death searchable 2 Co your client 3 Outlook Thunderterd Phone ae J n SETTE e Labels Cancel H inu Cancel SMTP Port indicates sender port of SMTP server Generally the SMTP port value is 25 but there are exceptions for example SMTP port of G mail server should be 4
44. when you move the cursor on the Menu 2 2 3 RECORD SEARCH Move the cursor to Icon highlighted when selected click left mouse to enter into the setting interface Or press the button to enter into the setting interface There are three methods of searching record Method 1 playback by date Date input You can adjust the checking date and time press Enter ito input the number directly to adjust the year month date And then input time in the next box click play and then choose playback channel as Fig 2 8 User Manual then click play If you choose one channel it will playback full screen of single channel If you choose more than two channels there will be the same channels to playback simultaneously on four frames Method 2 playback by recording status Input the date click search land you can see the recording status on this date 11 53 EP 08 0910111213141518 E Bls gt Paar 21122 2324 2528 2T28 29 30 Instruction Fig 2 9 CHN There CH2 CH3 CH4 and ALL totally 5 options Press and you can change the channel to be displayed on file listing MONTH It will show all the recording status in this month Green means normal recording Red means alarm recording Grounding means no recording Click any date in this frame will search the record
Download Pdf Manuals
Related Search