Evoko Minto Manual 1.0
Contents
1. can be kept in the slot at one time The Evoko Minto comes with the USB cable in the cable storage slot The Audio cable can be found in the gift box 6 Charging amp battery status Evoko Minto is stored and charged on its Wall Mount when not in use When it is placed on the Wall Mount it will automatically charge and when removed from the Wall Mount voice Battery level POWER BUTTON LIGHT feedback will be given on the battery status voice feedback Charging Running on battery Fully charging a completely empty battery takes GO ENTE EUNT 6 hours You will then have a talk time of up to 8 h High Breathing white Fixed white ours Medium Breathing white Fixed white If connected with a USB cable that is attached to T Breathing red Flashing red a power source e g the USB port of a laptop this also provides power to the Evoko Minto and charges the battery Critical Breathing red Flashing red NOTE It is possible to buy Portable Chargers as accessories E ege EVOKO EVOKO MINTO CONFERENCE PHONE USER MANUAL version 1 0 7 Auto power oft After 10 minutes of inactivity you will hear the voice feedback Auto power off in 10 seconds You will then hear Press any button to abort Press any button on the Evoko Minto to abort the automatic power off If no button is pressed within the 10 seconds the unit will power off to save battery power NOTE When an audio cable is connected the auto powe2. EVOKO MINTO GOINEERIENCE IONE USER MARBUAL version LO dune 201 EVOKO MINTO CONFERENCE PHONE USER MANUAL version 1 0 ABLE JP aN TERS Jara iare O3 Wall EEEa TR OA Using the Evoko aA O5 Hale deia e AE ZE Cable Storage E O7 Charging amp battery status O7 Auto SO eof 08 More about connaclighi tetikoa 08 Configuration from the Evoko Control Panel O9 b er EVOKO EVOKO MINTO CONFERENCE PHONE USER MANUAL version 1 0 l nitial configuration Remove plastic cover Turn on by pressing the power button Language selection Available languages are English German French Swedish Spanish Italian Russian and Chinese Mandarin To change the language for Voice Feedback simultaneously hold down the and buttons for 2 seconds and you will hear a beeping sound You will then hear instructions in the first available language Scroll between languages that are being vocally presented by pressing either or To select your desired language simply wait 4 seconds after hearing the language of your choice and it will be activated You will hear the beeping sound again NOTE The language setting will be saved for the next time the unit is restarted Language settings can only be made when no active audio session is ongoing No audio session can be started until the language setting is completed Set Voice Feedback mode Activate or deactivate voice feedback using the voice fe
3. all outlet 5 Slide Minto into place by guiding it onto the back slot on the Wall Mount s protruding top edge 6 When the Evoko Minto is placed on the wall mount it will automatically charge When removed from the Wall Mount voice feedback is provided on the battery status E er EVOKO EVOKO MINTO CONFERENCE PHONE USER MANUAL version 1 0 3 Using the Evoko Minto 1 Turn on by pressing the power button 2 Connect the Evoko Minto to the device you would like to use for your call e g mobile phone Oa tablet or laptop Evoko Minto can be connected using either Bluetooth USB cable or audio erte cable and it can also be used with normal phone calls or VoIP services such as Skype or Micro soft Lync a Bluetooth i Press the Bluetooth button to initiate pairing mode ii The device ID is now visible and ready for connection d O i Make sure that Bluetooth is activated on the 4n device you would like to connect to the Evoko Minto and choose the Evoko Minto from the list of available Bluetooth devices n iv When pairing is completed this is confirmed by sound and light feedback v To remove the Bluetooth connection press and hold the Bluetooth button NOTE The default device ID is Evoko Minto followed by the last four digits of the ser
4. ection mute However if the audio cable is removed and the Bluetooth call is still active the call will be resumed Cancel ongoing pairing or remove active connection Hold down the Bluetooth button to cancel Bluetooth pairing Failed paring Device will attempt pairing for 40 sec If the pairing fails please check the following and try again i Make sure the device you are trying to connect has Bluetooth activated is in visible mode and is within 10m from the Evoko Minto it That the correct Evoko Minto unit is selected from the list of Bluetooth devices Automatic disconnect After 30 minutes of inactivity the voice feedback Bluetooth will disconnect in 10 seconds Press any button to abort will be played Press any button on the Evoko Minto to abort the automatic dis connection If no button is pressed within the 10 seconds the Bluetooth connection will be removed to save battery power Bluetooth during Wall Mount loudspeaker mode The device can be used as a wireless audio speaker when in the Wall Mount Pairing is initiated by pressing the Bluetooth button but works In the same way as regular pairing described above 08 www evoko se EVOKO EVOKO MINTO CONFERENCE PHONE USER MANUAL version 1 0 9 Configuration trom the Evoko Control Panel The settings in the Evoko Minto can also be changed in the Evoko Control Panel software This is also where you do firmware upgrades Please visit www e
5. edback switch at the bottom of the unit Voice mode i The feedback switch is moved to NORMAL position Sound mode i The feedback switch is moved to LIMITED position NOTE Certain system critical voice feedback tags will also be played in limited mode Set backlight mode To activate a backlight while charging in the Minto Wall Mount simultaneously hold down the Bluetooth button and power button on the Evoko Minto Do the same to deactivate NOTE The default backlight mode is off NOTE The unit can be rebooted by carefully inserting a paper clip in the hole marked with Reset on the bottom of the unit D ped JE 5 D g A l Wait 4 sec O Bottom of unit VOICE FEEDBACK RESET NORMAL LIMITED O3 www evoko se EVOKO EVOKO MINTO CONFERENCE PHONE USER MANUAL version 1 0 2 Wall Mount instructions nm les 1 Start by unscrewing the two lower screws M dk lt gt holding the Wall Mount and wall bracket pui together LE 2 Fasten the Wall Mount bracket on to wall using LA suitable wall plugs and fastening screws The cord is pre assembled vertically but it is possible to mount it in any direction 3 Place Wall Mount on top of bracket and fasten from underneath with the screws which come with the package 4 Plug in the power adapter to a proper w
6. ial number of the unit which can be found on the bottom of the unit NOTE To change device the Bluetooth connection needs to be removed b USB cable i Open the cover on the front of the Evoko Minto i Plug in the micro USB connector to the Evoko Minto and the standard USB connector to the device you would like to connect c Audio cable i Open the cover on the front of the Evoko Minto ii Plug in one end of the audio cable to the Evoko Minto and the other end to the device you would like to connect NOTE When using the audio cable the halo light turns green immediately once the cable is plugged in T egie EVOKO EVOKO MINTO CONFERENCE PHONE USER MANUAL version 1 0 3 Use the connected device to make a call 4 Air Swipe to mute a Move your hand over the unit s mute icon at N E 906 the center of the device at a distance of TUL approximately 5 cm 2 in to activate the mute function The halo light turns red to clearly show to everyone that the microphones are turned off b To unmute just do another Air Swipe e NOTE The Mute function can only be activated in case a voice connection is valid 5 Change the volume on the Evoko Minto or on the connected device On the Evoko Minto a Press to increase to decrease volume Each button press increases or decreases the volume by one step b Hold down on bu
7. r off function is disabled If there is an active Bluetooth connec tion the unit will stay on for 30 minutes before going into d Automatic disconnect see more in the Bluetooth section below before the Auto power off timer starts 8 More about connections 1 Audio cable e a The audio cable connection has the highest priority b Pressing the Bluetooth button will activate voice feedback Please remove audio cable before Bluetooth pairing and maintain existing audio cable connection c Inserting a micro USB cable will initiate charging if the cable is connected to the device that will supply power and keep existing 3 5mm cable connection NOTE The audio cable used is an analog audio cable with a 4 pole 3 5 mm connector that works with most mobile phones Some phone models however use the 3 pole connector 2 USB cable a Ifan audio cable is connected it has a higher priority and makes the USB connection MUTE b Ifthe Bluetooth button is pressed it has higher priority and the device will switch to Bluetooth and initiate Bluetooth pairing c The USB cable also provides power for the Evoko Minto Charging with USB can also be done if the audio cable is connected or a Bluetooth connection is active Bluetooth connection If the USB cable is connected it will initiate and maintain the existing Bluetooth connection If the audio cable is connected it has higher priority and makes the Bluetooth conn
8. tenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is needed Consult the dealer or an experienced radio TV technician for help Responsible party Evoko Unlimited AB c o DMJ Technologies Northeast Territory 2 NJ NY Metro 140 Henley Avenue New Milford NJ07646 USA Tel 1 201 261 5560 Evoko Minto Model number EM1001 Warnings e 3 5mm audio cables must be shorter than 3 meters The socket outlet shall be installed near the equipment and easily be accessible Excessive sound pressure from earphones and headphones can cause hearing loss CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type EK Intertek 4004907 Conforms to UL STD 60950 1 Certified to CSA STD c22 2 No 60950 1 ere ej LE BS EN 60950 1 HE OIO wwweevoko se EVOKO
9. tton to increase or decrease volume continuously until maximum or mini mum volume level is reached NOTE The volume is a combination between the volume set on Evoko Minto and the volume set on the device connected to it On the minimum volume level on Evoko Minto the speaker sound is completely muted When a connection is broken or changed and when the Evoko Minto is powered off the volume level is reset to its default value 6 Press the power button once to receive voice feedback on battery status NOTE This voice feedback will not be heard at the other end even if there is an ongoing call For info about the different battery levels please see the charging and battery section below 7 Press and hold the power button to power off OO www evoko se EVO KO EVOKO MINTO CONFERENCE PHONE USER MANUAL version 1 0 4 Halo light statuses e EA Flashing pairing mood Active call Microphone muted Solid connected 5 Cable storage At the bottom of the Evoko Minto there are two cable storage slots one for the USB cable and one for the Audio cable To use the cable simply pull the cable tag and unwind the cable To put the cable back in the cable storage slot start by putting the connector without the cable tag in its slot and wind the cable in the direction shown by the symbols at the bottom of the Evoko Minto and finish by inserting the connector with the cable tag into its slot NOTE Only one cable
10. voko se support to download the Evoko Control Panel www evoko se support iode EVOKO EVOKO MINTO CONFERENCE PHONE USER MANUAL version 1 0 FCC Compliance This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with he limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installa ion This equipment generates uses and can radiate radio requency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving an
Download Pdf Manuals
Related Search