Home

Manual

1. Press UP DOWN to scroll Each record will be displayed on a whole screen including the serial number name if there s any time and date Picking up the handset on viewing the record a call to the present number displayed will be make automatically Press MENU to switch among Call Add Entry and Add to blacklist Press OK to confirm 8 3 2 Received Calls Display the Received calls list 8 3 3 Missed Calls Display the missed calls list 8 3 4 Delete All There will be words read Are you sure Press OK to delete all the Call Log Notice 1 Press Right button on standby mode to check the dialed numbers 2 Press Up button on standby mode to check the missed calls 3 When the records have added up to 20 items the earliest records will be covered automatically if there are new records 8 5 Phone Setup Ring Type Ring Volume Time amp Date Date Format Default Set 8 5 1 Ring Type 8 music ring tones and 6 normal ring tones supported Press UP DOWN to scroll Press OK to confirm 8 5 2 Ring Volume 8 volume levels supported Press UP DOWN to scroll Press OK to confirm 8 5 3 Time amp Date The present time amp date will be displayed Press LEFT RIGHT to move the cursor Press UP DOWN to adjust the related data Press OK to save If you have inputted the new time amp date in wrong format the operation will fail and there will be error reminder Format Error 8 5 4 Date Format 1 YY MM DD 2
2. have left the house or press the disarm button will send have gone home to his father or mother The default remote control for child is marked C on the back of the remote control The user can add A and B as Kit Remote control or Set C as normal remote control 9 3 SMS Commands for Arm Disarm The owner could switch the system from Arm Disarmed Mode by SMS 9 3 1 All Armed Mode Return SMS Notice All Armed Mode will be activated directly with no delay after the Control Unit receives this SMS command 9 3 2Local Armed Mode Example Return SMS 9 3 3 Disarmed Mode XXXXC Example Return SMS 10 Add Cancel wireless sensors 10 1 Start Press 8566 on standby mode 10 2 Add Defense area The terminal supports maximum 16 different sensors for gas leaking intrusion smoke and infrared alarming and so on Different defense areas should be configured related to different RF codes first before being in use Present Defense Areas will be listed in the menu First two digits is the serial number of the defense area The name of the defense area if there is one will be displayed right after the serial number Letter indicates main defense area Letter V indicates valid RF code Press UP DOWN to scroll Press MENU to switch between EDIT and DELETE Press OK to confirm To create a new defense area 1 Choose EDIT on a blank item 2 Edit the name of the defense area and sele
3. 10 Supports SMS Operation report when armed or disarmed by SMS the Control Unit will reply a SMS to user s cell phone 11 More Programmable to set its features e g delay time named the sensor names send SMS to users or not when power failure turn on siren or not etc 12 Standby internal rechargeable battery which can last 12 hours 13 Based on the GSM communication network and Operation Menu Display technology apply to wide range situations 14 Elegant designs and easy to operate 5 Installation 5 1 Insert SIM into Control Unit Open the main bottom cover and install the GSM SIM card You will also need to make sure the battery is installed properly 5 3 Install the Antenna and power to the control Unit Install the GSM Antenna to the ANT Connector The Antenna serves to provide a strong GSM signal Plug the power adaptor with a proper AC power supply Insert the DC output port into the power supply port on the main Control Unit ece Confirm the installation is done properly and turn the Control Unit on by ON OFF button Check whether the status indicator is working properly 5 4 Install the Magnetic door window sensors Magnetic door window sensors signal the Control Unit when the two parts separate by more than between 1 5 to 3 0cm Low Voltage Indicator Double Faced Tape Work Indicator os Y In some circumstances an Infrared beam fence is more appropriate than magnetic sens
4. DD MM YY 3 MM DD YY Date Format DD bas M 03 11 08 11 03 08 03 11 08 8 5 5 Default Set The screen reads Are you sure Press OK to confirm Related Operations Blacklist amp Whitelist cleared Password changed to 1111 Call Log reset All configurations reset to factory settings 8 6 Alarm Setup Input password to enter Alarm Setup menu Notice 1 Password should be 0 6 digits 0 digit no password Not recommended 2 The password will also be used for remote SMS control Default password 1111 Input the password during an alarm and the alarm will be cancelled Recipient No 2 Power Failure All Arm Delay Alert Delay Change PWD RF Code Query 8 6 1 Recipient No There could be 3 recipients at most On alarms the Control Unit will send an alert SMS to the three recipients in sequence There will also be an alert call to the 1 recipient and the siren in the house will then start to ring The 1 recipient could choose to pick up the phone to monitor the voices inside the house Notice The 1 recipient should never be NULL Otherwise there will not be alert calls 8 6 2 Power Failure If there is a power failure the Control Unit will send an alert SMS to the recipient if this function is activated 4st 8 6 3 All Arm Delay This is for configuring the delay time of All Armed Mode It is used to prevent false alarms when the owner still stays at home on All Armed
5. DelAll Delete all the drafts in Draft Box 8 1 4Create SMS Icons amp Operations Capital Lowercase Numeral XXXX XXXX xxxx length of the present content XXXX m length of the SMS UP Down Screens switch LEFT RIGHT Cursor position s Delete a letter A blank space Number Keyboar Input related letter just like a cell phone Press MENU to switch among the following options Send Input the target number and send the SMS The SMS will be stored in Sent Items automatically Clear Delete the inputted contents Save Save the inputted contents in Draft Box 8 1 5 Templates There are six editable SMS templates supported by the Control Unit Select the related template with the help of the direction keys and press OK button to edit the selected template Maximum letters 30 Notice 1 Inbox messages are stored in the SIM card The Inbox capacity depends on SIM capacity Sent Items are stored in the Control Unit 10 items at most Renewed automatically Drafts are stored in the Control Unit 3 items at most Renewed automatically 2 3 4 If you check the Inbox immediately after you turn the Control Unit on there might be words displayed S M Busy Then you will need to wait for a while until you could check the Inbox normally 8 2 Phone Book Name Query Location Query Add Entry Contacts 8 2 1Name Query Input the name gt Press OK Maximum length
6. 12 letters Press MENU to switch among Call Delete and Edit Press OK to confirm See also Add Entry 8 2 2 Location Query Input the location gt Press OK Press MENU to switch among Call Delete and Edit Press OK to confirm See also Add Entry 8 2 3 Add Entry Input the new number gt Press OK Maximum length 14 digits Input the name gt Press OK Maximum length 12 letters Option Add to whitelist or not If you choose OK the number will be added to the whitelist Press OK at last and the new entry will be saved in the SIM card 8 2 4 Contacts Limit 1 Blacklist 2 Whitelist Selecting Blacklist or Whitelist you will be able to view a menu including three options ON OFF and EDIT By ON or OFF you will be able to activate deactivate the blacklist or whitelist function By EDIT you will be able to switch among three functions Add Delete and Del All Notice 1 Phone book is stored in SIM card It depends on SIM card capacity 2 Blacklist and Whitelist is stored in the Control Unit 20 items at most for each 3 If you check the Phone Book immediately after you turn the Control Unit on there might be words displayed S M Busy Then you will need to wait for a while until you could check the Phone Book normally 8 3 Call Log Dialed Numbers Received Calls Missed Calls Nelete All 8 3 1 Dialed Numbers Maximum 20 numbers listed Number with icon indicates that it is in black list
7. 7 2 9 14 15 1 UP Press it on standby mode to check missed calls 2 RIGHT Press it on standby mode to check dialed numbers 3 Armed Mode Press it on standby mode to choose All Armed Mode or Local Armed Mode with the correct password 4 Disarmed Mode Press it on standby mode to deactivate the system with the correct password 5 MENU Press it on standby mode to enter the main menu 6 Cancel Press it on standby mode to enter SMS menu 7 OK Press it on standby mode to enter the phone book 8 SMS Templates Press it on standby mode to enter the SMS templates list 9 Volume Press them to adjust the volume of the dialing tone and the call volume with the help of the volume adjustment string displayed on the LCD As for the keyboard volume it will be the same as the ring volume See also 8 Menu Operations 10 SMS Indicator When there comes a new SMS it will be turned on while a logo H being displayed on the LCD The amount of the unread SMS will be displayed on the LCD also After you have read all the unread SMS the logo 41 will be removed and the SMS indicator will be turned off 11 SOS Press it anytime to ask for emergent helps 12 DOWN Down direction 13 LEFT Left direction 14 Redial Redial the last outgoing call 15 Handfree Make Answer calls without pickup the handset 16 Number Keyboards 8 Menu Operations On standby mode press MENU button on the Control Unit it will read SMS Phone Boo
8. gt SOS After the configuration of the RF codes of the four keys you will also need to select the remote type Kid s or not Notice 1 The setup sequence of the four keys must be followed strictly Or there might be false operations 2 VVVV plus C indicates that the remote is configured as Kid s Remote 10 5 Delete all wireless sensors and remote controls Go back to the menu then select the delete all command select it then the system will alert Are You Sure gt Press OK to delete all the RF setups of the defense areas and the remotes 11 Technical specifications Rated Voltage 5VDC 1 5A Working temperature 10 C 60 C Storage temperature 20 C 60 C Relative humidity 10 90 No condensation Work frequency GSM900 1800 1900Mhz Communication protocol GSM PHASE 2 2 include data service Wireless sensor receiving frequency 433 MHz Wireless sensor permission quantity 15Pcs Effective distance wireless of remote control 100 m Battery Built in lithium ion battery 2500mAh 3 7V Standby time Approx 12hours depending on the network condition Net Weight 1 82Kg 12 Important information 12 1 Please read the User Manual carefully before you install the Control Unit and set the Control Unit 12 2 Do not install the system in close vicinity with objects that generate strong interference such as TV set and computer 12 3 Install the system in a hidden place 12 4 Avoid getting water into the Control Unit 1
9. main defense areas and normal defense areas When one sensor has detected unusual status it will send its RF code to the Control Unit After the Control Unit has received it the name of the defense area will be displayed on the LCD according to different Armed Modes mentioned above In order to avoid fault alarm there will be a delay reminder customizable See also 8 Menu Operations Then there will be a logo displayed on the LCD At the same time the alert SMS with the name of the related defense areas will be sent to the recipient numbers 3 numbers at most There will also be an alert call to recipient A The siren in the house will also start to ring As for the recipient A he she could choose to answer the call in order to monitor the voices inside the house siren off After the recipient A hang up the call the siren will continue ringing for one minute The name of the defense area displayed on the LCD will only be removed after one switch between off hook and hang up 6 8SOS By pressing SOS button on the remotes or the Control Unit there will be a logo 4 displayed on the LCD after the delay reminder The alert SMS will then be sent to the recipient numbers with the following contents SOS 6 9 Disarmed Mode You could deactivate the whole system by pressing the Disarmed Mode button on the remotes or the Control Unit There will be words read Input Password After you have inputted the correct password the s
10. same goes for the calls Notice There will still be records in the missed calls list for the calls from the numbers in blacklist But as for those blacklisted SMS they will not appear anywhere 6 3 Whitelist Also for avoiding harassments we offer you whitelist function See also 8 Menu Operations If the whitelist is activated there will be a logo displayed on the LCD for each call or SMS from the number which is not in the whitelist the Control Unit will automatically reject it NOTICE There will still be records in the missed calls list for the calls that have been automatically rejected But as for those SMS that have been automatically deleted they will not appear anywhere 6 4 Armed Mode Alarm amp SOS As the main part of a house alarm system this Control Unit is integrated with alarm and SOS functions You could also easily activate deactivate the defense areas The remotes and sensors could only be used until their RF codes have been studied 1 million groups of different codes in all If any remotes or sensors have been lost or damaged you could easily change them with the help of the RF code function 6 5 Armed Mode This function could be divided into All Armed full defense areas and Local Armed selected defense areas All Armed Mode is designed for the security needs when the owner is not in the house Under this mode the Control Unit will collect signals sent from all the related sensors After you t
11. 2 5 Have a secure connection to the main power supply and provide good ventilation 12 6 This product was designed for the indoor use 12 7 Opening the control unit cover will void the warranty 13 Maintenance 13 1 In case of failure please contact the distributor or manufacturer 13 2 If the Control Unit works while the remote controllers and other sensors fail please check and change the battery 13 3 If the remote controller works but the Control Unit fails to telephone or send SMS texts switch the power of Control Unit off and switch it on after one minute Test this system after another minute or check the settings are correct and the GSM Signals are strong enough 13 4 If the Control Unit can run and sensors work but cannot send SMS texts or dial telephones please change SIM Card to check it 13 5 If the problem cannot be solved please contact the distributor or manufacturer 14 Warranty 14 1 This system is warranted to be free of defects in material and workmanship for one year from the date of purchase 14 2 This warranty does not extend to any defect malfunction or failure caused by abuse or misuse by the Operating Instructions In no event shall the manufacturer be liable for any alarm system altered by purchasers The End Any questions please help to contact us feel free Email Us info securitywireless co za www securitywireless co za Http www wirelesscamera co za Warranty Card Model Product ID Da
12. Mode Press UP DOWN to scroll Press OK to confirm There s no delay for Local Armed Mode 8 6 4 Alert Delay This is for configuring the delay time of alerts It is used to prevent false alarms when the owner forgets to deactivate the system at home or has done some wrong operations Press UP DOWN to scroll Press OK to confirm 8 6 5 Change PWD Input the new PWD twice following the reminders on the screen Press OK to confirm 8 6 6 RF Code Query Wireless Sensors The screen displays Turn on RF Sensor or Press Remote Follow it There will be key tones when the Control Unit has received the related RF code If the wireless sensor has already been studied you will be able to view the related data or type of the related RF equipment Notice Please only activate one RF equipment Wireless sensor once Otherwise the Control Unit might not be able to recognize the RF code 9 Remote Control Instructions 9 1 Active or Deactive Arm or Disarm Press the button on the remote control the Control Unit enters arm status Press the button on the remote control the Control Unit disarms immediately Press the button on the remote control the Control Unit enters Local armed mode Please see the 9 2 Kit s Remote control function The system support Kit Remote Control recognize function is our unique technology When the Child press his remote control arm button the Control Unit will send a SMS
13. Wireless Alarm Ae ml k V aT 1 GSM Alarm System WASMS PRO User Manual Ver 1 2 Date Issued 2008 04 18 All rights reserved by Wireless Alarm 012 6547895 012 654 6209 Table of contents 1 Brief introduction 2 2 Standard Packing list 2 3 Physical Layout 3 4 Functions and Features 3 5 Installation 4 6 Menu Functions 8 7 Keyboard Instructions 13 8 Menu Operations 14 9 Remote Control Instructions 23 10 Add Cancel wireless sensors 25 11 Technical specifications 29 12 Important information 29 13 Maintenance 30 14 Quality Warranty 30 1 Brief introduction The WASMS PRO is designed for house and office and other applications It is based on GSM Communication network and LCD Menu display technology When any sensor triggered it will Call amp Send SMS to user cell phones Also the Child Remote Control recognize function is our unique technology When the Child press his remote control button the Control Unit will send a SMS I have left the house or I
14. ct the defense area type Main means in Local armed Mode this area will be in armed status Normal means in Local armed mode this area will be in disarmed status 3 Turn on the related RF sensor and activate it The screen will read Rec Code XXXXX while receiving the RF code 4 Turn off the sensor and press UP The screen will read Repeat the previous steps again 5 Repeat the previous steps and the related RF code will be saved The same goes for editing the present defense areas Notice 1 The name of the defense area should be no longer than 10 letters 2 The AO A7 in all of the Wireless sensors except the Remote Controls should be the same e g the AO0 A7 in the wireless door sensor is 1111111 then if you want to add the Wireless PIR Sensor to the Control Unit the AO A7 in the Wireless PIR Sensor must be 1111111 3 The D0 D3 in the wireless sensors Except remote control must be different If any two wireless sensors is the same then the system will treat them with the same wireless sensor 10 3 How to set the wireless Sensors Please see below 1 Open the back cover of the Wireless sensor carefully 2 Locate the IC boards black jumpers labeled AO A7 and DO D3 3 The AO A7 3X8 PIN connectors are the Wireless Address bits code area and the DO D3 are 3X4 PIN connectors are Wireless data bits code area 4 Also you can see the H N and L letters besides the 3X8 PIN and 3X4 PIN connectors like below
15. have gone home to his father or mother The WASMS PRO equips with LCD and Operation Menu Display all operations and settings are visual and intuitive What you need is a pre paid or contract SIMCard which support Call ID function Service providers in South Africa are recommended 2 Standard Packing List Control Unit X1 Remote contol X3 A B C The C Remote Control is for Kid Wireless PIR Motion Sensor X1 Wireless Door magnetic Switch X1 Wired Siren X1 GSM Antenna X1 AC DC AdaptorXx1 User Manual X1 Optional Accessories Combined Light and Siren PIR Motion Sensor Glass Break Sensor Magnetic Window Sensor Magnetic Steel Scrolling Door Sensor Infrared Beam Fence Wireless Strobe Siren Our Other Wireless Sensors 3 Physical Layout 3 1 Control Unit physical layout Status Indicator Handset Speaker Number Keyboard ON OFF Power Supply Factory use only 4 Functions amp Features 1 Tri_band 900 1800 1900MHZ 2 Can armor disarm by SMS or remote control or Control Unit keyboard 3 Auto send SMS Alert to pre set cellp hone when it triggered 4 Auto dial Pre set alarm phone numbers when it triggered 5 Supports up to 15 pcs wireless sensors each sensor can be named by user 6 Supports 3 alarm telephones 7 Supports Pre set Message Message inbox Message Outbox etc 8 With Handset and dialer the functions like the Cell phone 9 Supports wiretap through internal Mircophone
16. ible AC power outlet is available near the Control Unit First connect accessories to the Control Unit then the AC adapter 5 8 Install the Siren Connect the Siren to the Control Unit and fix it in appropriate locations corner 1D jj Gn B Light amp Siren Siren Wireless Strobe Siren 6 Menu Functions 6 1 Calls 6 1 1 Making Calls On standby mode press handfree button or pick up the handset Dial the target number and press OK button to make calls After the call you could either put the handset down or press handfree OK button to hang up 6 1 2 Receiving Calls When a call is coming there will be Caller ID if supported by the SIM card and Caller Name if already stored in the Phone Book displayed on the LCD Then you could answer the call by picking up the handset or press handfree button 6 1 3 Missed Calls The amount of the missed calls will be displayed on the LCD The amount will be automatically changed into 0 when the user has checked the entire missed calls list 6 2 Blacklist In order to avoid harassments we offer you blacklist function For those numbers from which you don t want to answer calls or reply SMS you could add them into the blacklist See also 8 Menu Operations If the blacklist is activated there will be a logo 9 displayed on the LCD for each new SMS that has been received the Control Unit will check it with the blacklist If the number is in it the SMS will be deleted automatically The
17. k Call Log Phone Setup Alarm Setup With the direction keys you will be able to choose one option from this 8 1 SMS Inbox Sent Items Draft Create SMS Templates 8 1 1Inbox The newest SMS will be displayed on the top of the SMS list The total memory will be displayed also You could view the details of each SMS with the help of the direction keys LEFT and RIGHT You could select the SMS by pressing UP and DOWN Press MENU to switch among the following options Delete Delete the present SMS Reply Reply to the sender with a new SMS Call Call the sender Add Entry Add the present sender number to the phone book Add to Blacklist Add the present sender number to the blacklist Forward Forward the present SMS to other cell phones with without editing 8 1 2Sent Items The latest 10 SMS receivers will be listed on the LCD by the names or the numbers Press MENU to switch among the following options View View the content of the selected SMS press MENU again then there will be three other options Call Send and Edit Del All Delete all the SMS in Sent Items 8 1 3Draft While editing one SMS you could save it to Draft Box by selecting Save function Press MENU to switch among the following options View View the content of the selected draft press MENU again then there will be three other options Call Send and Edit
18. ors i e veranda picture window balcony boundary wall e t c Wired or wireless glass break sensor can also be used see below For a Scrolling Steel Door a special Wireless Scroll Steel Door magnetic sensor must be used due to interference of the wireless signal caused by the steel door Installation attach the larger half to the floor and attach rivet or glue the smaller half to the scroll steel door An alarm is triggered when the halves are separated more than 3 to 5 cm h X Rivet it on the floor Wireless Signal Transmitter Scroll Steel Door 5 5 Install the wireless PIR Motion Sensor The PIR sensor will detect a person since human temperature is different to ambient temperature When triggered the PIR will signal the Control Unit Apply the detection area illustration below when installing _ 40 degree Wireless PIR motion sensor 50 degree Sim Surveillance Area 5 9m sensor windows infrared ceiling wall infrared 5m 10m 5m 10m Wireless curtain sensor detection area illustration below gm u 8m p y a 5 6 Install other sensors For smoke you can use wireless smoke sensor for gas leakage detection you can install gas leakage sensor below 5 7 Install the Control Unit In order to avoid destruction of the Control Unit by intruders please install it in a concealed location convenient to the operator If applicable ensure that an uninterrupt
19. picture 5 Connect L and N is means 0 and connect H and N is means 1 connect neither L and N nor H and N is means 2 6 Make sure the A0 A7 is the same as the one which comes with the standard package and set the DO D3 to different value to distinguish each defense area If the value of AO A7 and DO D3 are the same the system will treat them as only one defense area 7 Make sure the jumpers are correct Then install the cover carefully 8 Turn off the sensors power before setting 9 Trigger the wireless sensor and test the setting result If the wireless sensors do not work please check the jumpers again 10 You can set many sensors in the same defense area Example If you want to set all wireless PIR sensor in the same defense area you can set the DO D3 of all wireless PIR sensors to the same the jumper like below LN 0 HN 1 DEN H 2 D1 Dt 5 AS A3 A2 A1 AD i n a y L 10 4 Add Remote Contols to the Control unit The Cotrol unit can support Maximum 5 Remote Controls Present remote control will be listed in the menu VVVV indicates that the four keys of the remote have all been studied Press UP DOWN to scroll Press MENU to switch between EDIT and DELETE Press OK to confirm For the RF code study procedure please check the previous contents about the setup of the defense areas But you will need to set the RF code of the four keys of the remote in this sequence All Armed gt Local Armed gt Unarmed
20. ry to activate this mode there will be a delay before it s really activated This is for avoiding fault alarms if the owner hasn t been able to leave the house When the All Armed Mode is really activated there will be a logo displayed on the LCD Local Armed Mode is designed for the security needs when the owner is in the house By then only the sensors of the selected main defense areas will work For example you could set the Gas Defense Area and Door Window Defense Area as the main areas Local Armed Mode could be activated instantly When it s activated there will be a logo i displayed on the LCD To activate the Armed Mode you could use the All Armed Mode button or the Local Armed Mode button on the remotes But the RF code needs to be studied first As for the query of the code and the delay of the All Armed Mode please see also 8 Menu Operations You could also use the Armed Mode button on the keyboard of the Control Unit After you press that button there will be words read on the LCD Input Password After the correct password has been inputted it will read as below Select Armed Mode All Armed Local Armed Choose one option with the direction keys and press OK button 6 7Alarm The Control Unit could support 16 defense areas at most They could be used for detecting gas theft smoke and door infrared and so on With the help of the two Armed Modes mentioned above the defense areas could be divided into
21. te of Purchase Date of Production Maintenance Record Dealer
22. ystem will be deactivated And the related logo of the Armed Mode will be removed 6 10 Canceling Alarm You could cancel the alarms during the delay reminder or during the alarms by pressing All Armed Mode Local Armed Mode Disarmed Mode button on the remotes And the system will be turned into the selected All Arm Local Arm Disarmed Mode Cancel on delay reminder the delay and the alert will be cancelled Cancel on alarms the logo will be removed and the present alarm will be cancelled You could also cancel the alarms with the correct password by the Control Unit or by SMS 6 11 SMS Templates In order for the elderly or kids to manage it easy who might find it inconvenient to edit SMS SMS templates are supported by the Control Unit 6 editable templates at most On standby by pressing the templates button there will be 6 templates displayed on the LCD You could easily send the related SMS to recipient A by selecting the related number 1 6 on the number keyboard 6 12 Kids Report The remote could be configured as the kid s remote As a kid s remote it will be able to send SMS while other remotes can t When the Local Armed Mode or All Armed Mode is activated by the kid s remote the system will automatically send a SMS have left the house to recipient A The similar goes for the Disarmed Mode activated by the kid s remote have gone home Keyboard Instructions 6 5

Manual

Contents

Download Pdf Manuals

Related Search

Related Contents