Black Box K15 User`s Manual
Contents
1. may cause reflection on the glass surface which can hinder video input Watching the screen while driving can hinder safe driving Be aware that the user is liable to accidents and damages Apply double sided tape firmly when installation Long hour driving or rocking of the vehicle can misplace the product which can deteriorate the performance Cautions are to prevent accidents or danger by using the product safely and properly therefore please follow the instructions The company is not responsible for any problems caused by violation of instructions in this manual e When driving on a road where there is no lane or it is difficult to see the lane e When the lane is not continuous e When GPS reception is not good in a busy city or due to a natural disaster e When the sight is not good due to extreme weather rain snow fog etc e When there are problems with tunnel entrances exits or the headlights while driving at night e When there is no light or the outside lighting changes abruptly e Abrupt cutting in changing the lane abruptly e Sharp turn with the radius of curvature less than 250m e Dark tint on the windshield poor sight due to stickers and accessories e When the vehicle cannot detect the lane if it is driven according to lanes e FCWS function may not work depending on the color or shape of a car ahead brightness of the headlights or whether there are streetlamps In the condition above safety assistant systems2. AUTUPILGT Advanced Driving Assistance System K15 This product is a driving assistance system Since any accident while using K15 shall not be the responsibility of the manufacturer please drive safely according to the purpose of this product USER S Manual X TABLE OF CONTENTS Safety advice 3 Products and Features 5 Explanntions of the device o sooo 6 Components cooo 7 Installation instruction and calibration 8 Installation location by vehicle type pecccccccccocs 13 Features of the product povcovcccee sooo 15 Setting occccoccece r eeseese e 17 Function description coccccccccccccooceceeeeece0000000 22 Firmware upgrade eeeeesce so 000000s 26 Use for viewer program se000s000000000000000 00000000 27 Z Warning e Do not put the product in any heating devices stove microwave oven etc to dry when it is wet It can cause deformation or malfunction for which free services are not available e Do not use chemical detergents benzene thinner alcohol etc to clean the product It can cause fire e Do not disassemble or apply physical impact Free services are not available for damages caused by random disassembly or physical impact Caution Install according to the manual Otherwise the product may not operate or operate properly e Keep the windshield in front of the lens clean Foreign substances may cause malfunction and hinder video input Keep any objects away from the dashboard as possible It
3. LDWS FCWS may not work properly therefore drive carefully The company is not responsible for any problems caused by violation of instructions in this manual v Products and Features W Safe driving assistance device It is a cutting edge product with FCWS LDWS and Drive Recorder features to deliver essential information for safe driving GPS receiver It receives GPS signals sets the operation speed and saves the time and location of the accident while saving the video Main Features v Explanntions of the device Remote receiver POWER LED RESET MIC Micro SD card slot USB type DC input Turn signal Video Out and GPS connection Angle adjusting lever Angle fix bolt CAMERA LENS Security Warning LED e When porver is on LED turns on e Direction indicator connecting port Connect the cable that comes with the product e Angle fix bolt Adjust angle between the main body and the Lens Adjust angle for optimal performance according to car types car SUV large van bus truck Main device amp Base bracket External GPS Manual Micro SD Card Adapter Double sided tape Cable Mount DC 12V 24 GPS Turn Signal Video Out cable E Installation instruction and calibration e Make sure to keep the following in mind before installation Installation shall be made on even flat ground with the car engine turned off e Please check the necessary components enclos
4. S mode when you change the lane with the direction indicator on an alarm does not sound A LED operation measure e RED LEDs on After booting all functions constant event manual recording are normally operable After working RED LED is blinking slowly 7 Functio descripti Y Plug in amp out Micro SD card e Insert the Micro SD card with its logo side toward the rear case of K15 e Plug out the SD card slightly press it e For details see the picture below e K15 receives GPS time data in regular interval and synchronize its time with the received time in order to record exact time of any event Therefore once time is set the RTC function makes K15 work in accordance real time e Automatic time setting After booting when the car is in a place where GPS reception is possible for at least 5 minutes for the first use K15 automatically synchronizes its system time to the received GPS time data e Since then time will be automatically set once every day Micro SD v Firmware upgrade Read the followings carefully before upgrade contact the stores for upgrade files Step 1 Copy the upgrade files onto the root directory of Micro SD card Step 2 Turn the power OFF and insert Micro SD card Step 3 Connect the power cable to the main body and turn the power ON ot Step 4 Wait for about 10 20 sec D Step 5 Start upgrade once the power LED red LED Step 6 It automatically restarts after fini
5. ed in the product kit and follow the installation instruction step by step e This manual describes how to install K15 in a car by car type passenger car SUV Bus and truck For buses and trucks except for the installation position the procedures are similar with those for passenger cars You can find details later in this manual After successfully installing the camera drive on a even straight road to receive GPS signals this will take up to 5 minutes When you drive over 30 mph you will hear a recorded voice The Land Departure Warning System has been calibrated In re calibrations another voice message explains Recalibration has started After the voice messages all functions will normally operate If K15 performs incorrectly please reinstall it according to the installation instruction v Installation instruction and calibrat installation example for passenger car SUV amp Large SUV Horizontal p fooN SZ Vertical Installation how to attach where to attach angle for passenger cars and SUVs For perfect installation of K15 please make sure to follow the details of this manual step by step Install this product with the car s engine turned off 1 Apply the double sided 2 Stick the base bracket on 3 Put main device 4 Stick the GPS sensor tape enclosed in the package the windshield 1 or into the base on the top of and peel the film of the tape off 2 position bracket the windshield 5 Arrange
6. eo will be stored continuously X Function description Event recording Event recording records the images of an impact for 40 seconds that the internal G sensor detects and stores the recorded file as avi format The file is stored in the EVENT folder in the Micro SD card In event recording sensitivity of the G sensor can be set as three levels sensitive normal and insensitive Every time the G button is pressed the voice message changes as follows sensitive detection p gt normal detection Pe insensitive detection Stop pressing the button when you hear the mode you want and wait until it is automatically set Z Caution X Function description S Video out and turn signal connection the cable can be offered at a cost e With the Video out function you can check video images real time on a screen device by connecting K15 e USB port and the import port of the screen via the Video out cable additionally provided on your option e The provided Video out cable is RCA type male It can be connected to a AV IN RCA port of a screen device e The turn signal connection cable is all in one with Video out cable The turn signal cable comprises three lines e Connect them with the signal lines 12V which are normally placed under the driver s seat e Connect the black line with Ground and the rest two lines with the signal lines respectively e Once the turn signal cable is connected in the LDW
7. ning function K15 gives a warning when a sudden collision risk occurs FCWS LDWS Lane Departure Warning System K15 is a driving assistance device that detects forward collision and lane deviation risks by obtaining the image of the road in front of the car through its internal camera and analyzing the data real time and gives warnings to prevent any possible accident that can be caused by the driver s reckless or drowsy driving e With the VIDEO OUT mode on you can monitor the video image of an LDWS situation on a TV screen or a navigation system But for safe driving please use the Video out function only when necessary K15 gives the driver the information about lane departure situations which will help enhance the driver s alertness and ability to handle a crisis Features of the product e K15 gives warnings in the case of continuous lane departures when the car deviates from its lane repeatedly without indication e The driver can set his her own timing of an alarm five levels for left and right lines respectively e With the turn signal cable connected there is no LDWS alarm during turn signals Drive Recorder e After K15 booted up when an internal G sensor a shock detection sensor detects an event K15 automatically records the image for 40 seconds e K15 also records the time and location of an event as well as the image e Regardless of the amount of force imposed on the car you can record
8. nnected for video out function is normally working sv Step 1 Selecting car model Calibration li e Select car model e Car models car SUV large van bus see page 17 in the manual Horizon Step 2 Adjust horizontal and calibration line e Park the vehicle in a place with open front space and flat ground e Match the horizontal line where the red dotted lines meet to the yellow calibration line marked on the monitor and fix the angle adjusting bolt firmly e Calibration line is visible only when setting calibration LDWS initialization Horizon and yellow Calibration lines match yv Step 3 GPS reception e Audio guide is on when GPS reception is complete A Step 4 Position adjustment calibration e When audio guide informs completion of GPS reception start operation for calibration e Audio guide will inform that calibration is complete after driving for 1 3 minute over 30mph on a straight road with a single fine line on both sides All functions work normal after the audio guide 9 Installation instruction and calibration A insta lation instruction for the DC Input cable the turn signal cable and video out cable GPS Connect VCC TXD o GND aj gt Il m en White T C Left GPS Video Out Connect Yellow T C Right connecting cable M PER Ca Black GND W How to connect direction indicator cable When the direction indicator is connected with the cable the aler
9. perates incorrectly while FCWS you can start by pressing button 1 You will hear FCWS On Off e TTC Time To Collision 1 This is to calculate predicted time to collision and give an alarm in advance Press button the you will hear time to collision setting 2 Adjust the time the button Every time the button is pressed the voice message changes as follows half a second gt one second gt one and a half seconds If you set the time as 1 5 seconds an collision alarm will sound at a relatively longer distance A predicted distance to a collision can vary according to the car s speed e WS Working Speed 1 This button is to set the working speed of Forward Collision Warning unction Press button then recorded voice says working speed setting 2 Set the speed with button Every time the button is pressed the voice message changes as follows lOmph gt 20mph gt 30mph AUTOPILOT e FCWS LDWS B Box oo MIC eo eo 0 OOGO P LDws LWT Left Warning Time alarm timing for left line deviation e This is to set the timing of an alarm for a left line deviation If you feel that the timing of the alarm is too fast or late you can change the alarm timing for every 10cm e RWT Right Warning Time alarm timing for right line deviation e This is to set the timing of an alarm for a right line deviation If you feel that the timing of the alarm i
10. s too fast or late you can change the alarm timing for every 10cm e Press button then you will hear left line alarm timing e Press button 3 then you will hear right line alarm timing e Press button 2 Every time the button is pressed you will hear the voice message changes as follow level two faster Pp level one faster nominal mode gt level one faster gt level two slower When you hear a message you want stop pressing and wait for a moment AUTOPILGT 4 Lows e LDWS On Off If K15 operates incorrectly while LDWS you can start AUTOPILOT by pressing button You will hear LDWS On Off OJO e WS Working Speed This is to set the working speed of Lane Departure Warning Press button 8 then recorded voice says working speed setting Set the speed with button Every time the button is pressed the voice message changes as follows 35mph J gt 45mph Pe 55mph Stop pressing when you hear the speed you want and wait for a moment it is automatically set 5 5 gt g oe o JE e CR Calibration Reset 1 If K15 operates incorrectly while FCWS and LDWS you can start recalibration by pressing button You will hear calibration reset A B Box e G Sen G sensor shock AUTOPILOT 1 This is to set the impact level that a G sensor installed in K15 detects Press button then you will hear impact level se
11. shing gt upgrade 7 na Once firmware upgrade is done all settings are r t s initialized 1 Make calibration for setting FCWS and LDWS 1 page 11 Insert Micro SD card with ee the printed side toward the lens Micro SD Card TAN Caution Run BlackBox viewer installation file in Micro SD card and install by following the instructions When installation is complete click on the Open icon to open the viewer program Y Pc viewer screen Select normal recording Select impact recording Select front rear video Select forced manual recording Front video Screen brightness Map tee control Volume Video data timeline Accelerating sensor Switch top bottom left right Enlarge screen Screen capture Open files Play X Viewer program PC Viewer W switch Front Rear Y Switch windows mn Switches front rear and plays the video DER Select video folder to save Maximize Close program N the screen size on jormal Event Manual Minimize 20140001 0231_M_001 avi Nomal Normal recording video list the screen size 20140002 0232 _M_002 avi Event Impact recording video list Manual Manual forced recording video list Open the folder select the file and press Play button to play the video 20140003 0233_M_003 avi 20140004 0234 M_004 avi Play control buttons Import Stop Previous Rewind Play Fast Next file View Vv file forward by frame Play control button y Accelerating sen
12. sor Displays accelerating Top bottom left and right button sensor graph Switches top bottom left right Enlarge screen Enlarges the screen size edie of the videos Screen capture Saves videos in images MEMO MEMO MEMO 7 Specifications Model K15 Capacity Micro SDHC Class10 supports up to 32GB GPS External GPS Operation storing 32 F 140 F 14 F 158 F temperature
13. t won t go off when changing the lane with the indicator light turned on The lines are red white yellow and black all of which should be connected with the signal lines connected to the direction indicator light when setting the direction Direction indicator light cable signal lines are usually under the wheel connect the Red one to the ACC the black one to the GND and white yellow one to either left right direction indicator light signal line Use the closest location if it s difficult to connect IN Warning Installation location by vehicle type 4 car types are available for installation Installation Position W Passenger car Install the product in top center of the windshield e Make sure the product Is aligned horizontally e Select car mode Sedan Installation Position S SUV mini van small truck e Install the product in top center of the windshield e Make sure the product is aligned horizontally e Select car mode SUV Installation Position W Large SUV large van e Install the product in top center of the windshield e Make sure the product is aligned horizontally e Select car mode large van X Installation location by vehicle ty Truck Attach the bracket on the center of the front windshield about 10cm above the wipers and arrange the cables neatly with the provided wire splice clips so as not to disturb the field of vision of the driver Bus Attach the bracket on the front
14. the image by pressing the recording button During driving K15 constantly records the image at any event and the driver can check it through a viewer program e K15 has a Micro SD card slot the memory is flexible on your choice e K15 support a PC viewer program so that you can check the recorded images on a desktop or a laptop BlackBox You can set all the functions and modes of K15 with the remote control enclosed in the package rv 4 VOL Volume control How to control volume 1 Press Vol button vou will hear a voice volume control mode 2 You can control the volume with button Arrow key MUTE Remove the voice instruction 1 This button is to activate deactivate alarm sounds and voice instruction When you press button 9 recorded voice explains sound has removed or sound has been activated lt A CT Car Type Type of the car where this product will be installed How to set the CT 1 Press the CT button CT A voice message will say Car type 2 Choose your car type by pressing the arrow button Every the button is pushed recorded voice will tell you a car type as follows passenger car gt SUV gt large SUV or VAN bus or truck Repeatedly press the button until you hear your car type When you stop pressing car type is automatically set AUTOPILOT e FCWS LDWS B Box lO MIC SEO OOO 0O Y rcws e FCWS On Off If K15 o
15. the power cord neatly 6 Connect the power cable 7 When connecting the turn signal alongside of the windshield and to the main body door pillar trim Use the provided cable or video out cable wire splice clips use the nearest connector or please refer to page 12 in USER S Manual 9 v Installation instruction and calibration Installation 8 It needs to connect the monitor screen to get video out from the device a yellow horizontal line appears on it Refer to the pictures below for indoor and outdoor installation respectively e Indoor installation As shown in the picture place the product so that the blue line on the monitor is placed at the point where the virtual red lines cross and fix it with the angle adjusting bolt Outdoor installation First park the car in an even open place with no big obstacles such as tall buildings e As shown in the picture place the product so that the blue line on the monitor is placed on the horizontal line the point where the virtual red lines cross and fix it with the angle adjusting bolt Horizontal Line Artificial Line e After checking the GPS reception follow the step 7 e Fix the bracket horizontally with the front windshield e Fix the main body with the angle adjusting bolt horizontally with the ground 7 Installation instruction and calibration 9 When the previous steps are completed power up the engine to provide power to the product Check if the monitor co
16. tting 2 You can change the setting with button O Every time the button is pressed the voice message changes as follows sensitive detection gt normal detection insensitive detection Stop pressing when you hear the mode you want FNS 5 FENS Bo If you think K15 records impacts too often set the mode as insensitive detection MIC e MIC On Off This is to set the Voice recorded on of ONE e TZ Time Zone Your Position Form the satellite 1 This is to set the Time zone PST MST P CST Pe EST PST Pacific Time Zone MST Mauntain Time Zone CST Central Time Zone EST Easten Time Zone Function description Function description Once the car engine started K15 is provided with power and red and blue LEDs are on Make sure that K15 is connected with the provided power cable e After booting K15 starts operating with the recorded message P Continuous recording e In this mode once power on K15 keeps recording and the files are stored in the NORMAL folder in the Micro SD card Manual recording Briefly press the REC button to start manual recording The red LED will keep blinking until the recorded video file is stored e The file is stored in the EVENT folder in the Micro SD card e If you want to extend manual recording time briefly press the REC button after the previous recorded file is stored Then another 40 second vid
17. window within 10cm from the vertical line which is typically placed on the center of the front window and 10cm above the wipers so as not for them to disturb the field of vision of K15 Arrange the cables neatly using the provided wire splice clips For trucks and buses do not forget to install a power stabilization cable a 24V to 12V adapter K15 can be operable in the voltage range of DC 12V to 24V but it doesn t necessarily mean that the product can operates in all buses and trucks Please ask advice from the store where you bought your K15 for the use in a truck or a bus Any damage or malfunction caused by power problems of the product installed in a truck or bus shall not be the responsibility of the manufacturer D Features of the product FCWS Forward Collision Warning System K15 is a driving assistance device that detects forward collision and lane deviation risks by obtaining the image of the road in front of the car through its internal camera and analyzing the data real time and gives warnings to prevent any possible accident that can be caused by the driver s reckless or drowsy driving e When there is a risk of a collision with the car in front K15 gives a warning to the driver in advance e Time To Collision TTC function With the TTC function on K15 predicts the time of a collision in advance and sounds an alarm when the time comes It works only when the car speed is over 30 km h FCW Forward Collision War
Download Pdf Manuals
Related Search