Digital Timer - Native Outdoors
Contents
1. OK to move page 9 7 Press the A or W buttons to change the RPM NOTE there are three 3 levels to choose from LO ME and HI 8 Repeat steps 3 7 to make additional feed times Once finished go back to 1 and push the button o the days of the week page 10 9 Repeat steps 2 8 to add feed times to other days of the week 1 When finished either wait for ten 10 seconds or page 9 LCD LCD battery symbol will tell you if the battery if full or empty gt Emu jam E mi LCD screen will automatically 314 turn off after a minute Press the i POWER button to turn it back To test the unit press the W button until you reach TEST Once there press the OK button The unit will turn on after a ten 10 second delay giving the user a chance to STEP BACK from the feeder The test will run for the duration as set for the first feed time page 10 Reset button located in two 2 areas There is a RESET button to the right of the arrow but tons Push settings Or push the POWER button to wake up the LCD Use the A or Y button to reach the RESET option Press the OK button to reset the settings back to factory settings F mulm DIM y g i FEED TEST gt RES E page 11 Maintenance Be very careful when operating the unit This feeder model dispenses feed in a 360 degree pattern at a high v2. may not be reflected in this version of the manual page 14 FCC FCC STATEMENT Product Name Digital Power Control Unit Trade Name Wildgame Innovations Model TDX This device complies with Part 15 of the FCC Rules Operation is subject to the follow ing two criteria 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Warning Changes or modifications to this unit not expressly approved by the party re sponsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to pro vide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the
3. Digital Timer PITI S LARM User s Manual Model TDX General Specs Digital Timer Unit Daily Feed Times 12 Run Time Duration Programmable from 1 to 30 seconds per feeding RPM Settings Programmable Hi Med Lo Battery Charge Level Indicator Real time Auto Battery Type Detect Determines 6V or 12V Battery Type page 1 Installation Replacement Timer Remove old timer by disconnecting the motor lead wires from the motor terminals and the power supply wires typically red and black in color from the battery terminals Now proceed to New timer installation instructions New Timer Connect the motor wires First identify the blue and white wires extending from the bottom of the timer unit Once located install the wires to the motor termi nals The order of the connection is not critical The motor will turn either clockwise or counterclockwise based on the terminal connection 3 Next install the battery The TDX is designed for either 6 volt or 12 volt battery operation For peak per formance Wildgame Innovations recommends tht you use the TDX digital timer with a Gel Cell battery page 2 Identify the two 2 power supply wires extending from the bottom to the timer unit red and black in color 2 Once located connect the red wire to the positive terminal on the battery as marked Next con nect the black wire to the negative terminal on the battery as marked
4. NOTE To insure that the user has hooked up the proper voltage battery the digital timer unit now comes equipped with an auto battery type detec tion indicator Once the battery is hooked up to a battery the voltage verification icon will appear on the LCD page 3 Setting Time Day 1 First make sure that the timer unit is properly con nected to the battery 2 Next press the POWER button to turn on the tim er Press the W button once so that the arrow on the left point s to CLOCK Press the OK or gt but 3 page 4 4 Use the A or W buttons to change the number Press the OK button to save changes NOTE If you wait ten 10 page 5 7 Use the lt or buttons to move to the desired day of the week Press the OK button to save chang es NOTE If you wait ten 10 seconds the unit will go back to page 6 Setting Feed Time s 2 Push OK or gt button to view the days of the week Press OK button when you have selected the day page7 3 You can set up twelve 12 different feed times per day When you push OK it allows you to set the time NOTE if you do not want twelve 12 different feed times 4 Press the A or W buttons to change the hour pur M T uot amp page 8 5 Press the A or W buttons to change the minutes 6 Press the A or W buttons to change the duration NOTE goes up to thirty 30 seconds Press
5. elocity and can cause serious bodily damage if not careful Keep head and eyes clear of spinner plate and feed disbursement area when the unit is running Do not put your hands or fingers near or on the dispersement mechanisim once the battery is connected Always make sure that the unit is placed on level ground surface and is level before you fill the hopper with any feed seed If the unit is not level and hopper is full you run the serious risk of the unit tipping over and causing harm to both you and the product itself Always exercise caution and care when loading filling the unit with feed material Please make sure that you and the unit are properly supported so there is no chance of anyone getting hurt Always disconnect the battery when transporting the unit or damage to the timer could occur Feeder To insure proper functionality and a long life WGI Innovations LTD strongly recom mends that you service your feeder at least once every year This feeder should have the hopper thoroughly cleaned out at least once a year Some feed seed types have the tendency to cake and may build up over time thus reducing overall hopper capacity clogging feed flow or generally interfering with the overall func tionality of the feeder unit page 12 You will start to notice a reduction in the feed dispersement pattern if your battery begins to lose its charge If you notice such a reduction either replace the battery with a fresh 6 Volt batter
6. separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help page 15 page 16 WGI INNOVATIONS LTD 602 Fountain Parkway Grand Prairie TX 75050 800 847 8269 fildgame Innovations and the Button Logo are TM trademarks of Wildgame Innovations LLC 4 port Responsible are TM trademarks of WGI Innovations LTD
7. unauthorized repairs alterations improper connection shipping abuse theft accident animal damage neglect or collat eral loss When returning product s for service you MUST obtain a Return Merchandise Authorization RMA number from WGI Innovations LTD Please include name UPS address No P O Box telephone num ber RMA number and a complete description of Warranty the problem on all enclosed correspondence When possible pack product carefully in original carton Customers are responsible for any shipping cost to WGI Innovations WGI Innovations will pay the shipping cost of re placement product to the customer We are not responsible for damage incurred in returning items for repair For product service send to WGI Innovations 602 Fountain Parkway Grand Prairie TX 75050 800 847 8269 Thank you for your purchase CUSTOMER SERVICE WGI Innovations LTD stands behind every product we manufacture for a one year product workmanship warranty and a strong commit ment to customer service If you are in need of customer service for missing parts or need as sistance with the operation or assembly of your product we encourage you to call one of our customer service representatives and let us assist you with your WGI Innovations product DISCLAIMER WGI Innovations LTD reserves the right to make changes to product features functional ity and physical design at its sole discretion As a result such changes
8. y or 12 Volt battery in the event that a gel cell battery is in use remove the existing battery and re charge it accordingly By disconnecting the battery for maintenance you will have caused the timer to lose its current pattern knowledge Once you re connect the battery the unit will go off the setting already made but the clock time will need to be changed to the correct time Extreme cold or excessively hot weather can affect battery life During these conditions check the battery often and replace if needed page 13 DISCLAIMERS WGI Innovations LTD is not responsible for dam age expense or injury caused by the unauthorized use of alterations to improper connection of and abuse or neglect of the WGI Innovations prod ucts WARRANTY For the warranty to be in effect you MUST com pletely fill out and mail the warranty card along with your proof of purchase to WGI Innovations within 14 days after the date of purchase As an alter native to mail you may also visit our website and register your product at www wildgameinnovations com you are still required to mail WGI Innovations your proof of purchase before the warranty is placed in effect Follow the onscreen directions to complete the process WGI Innovations LTD will replace all workmanship defects free of charge for ONE 1 YEAR after the date of purchase as long as your warranty is in effect This warranty DOES NOT COVER damage ex pense or injury caused by
Download Pdf Manuals
Related Search