Home

User Manual

image

Contents

1. Set the scales to zero using if necessary The zero indicator will appear Place some packaging on the platform and a weight value will appear Press to set the tare of the scales The weight that appeared on the display is saved as the tare value and that value is deducted from the display which returns to zero The NET indicator will be activated When a product is added only the product weight will be shown The scales may be tared for a second time if another type of product is added to the first Again only the additional weight will be shown after the tare has been set 49 MCEPS56ENOS 2 USER S MANUAL CELY Series PS 50 60 When the packaging is removed a negative value will be shown If the scales are tared before the packaging is removed this value will be the gross weight of the packaging plus all the product that was removed the zero indicator will also light up because the platform returns to the same situation as when was pressed 6 3 CHANGE UNIT OF WEIGHT Keep pressed for 4 seconds and the unit of weight will change The selected unit of weight will light up kg or Ib 7 CONFIGURATION 7 1 ACCESS TO CONFIGURATION MODE The scales have 7 parameters configuration parameters that can be set up by the user and there is also a method for entering calibration To set the configuration parameters or enter in calibration switch on the equipment while pressing FO CAL will appear 7 2 CALIBRATION After
2. entering Configuration mode the display will show the first function CAL Press and the displa will show UNLOAD Ensure the plate is empty and when the STABLE indicator is activated press again The display will show the calibration weight Press Co to select a calibration weight in kg Ex AO 2 A1 4 A2 6 After selecting the weight press and the display will show LOAD Place the calibration weight on the scales and the STABLE indicator will be activated Press to save The display will now show PASS The scale will then perform an auto check and the scales will be ready for use 7 3 CHANGE OF STEP After entering Configuration mode the display will show FO CAL Press Co and the display will show F1 INC Press to enter then press Co to select the 0 5 or 1 0 g step Press to save Press L and simultaneously to exit 7 4 VERIFICATION OF INTERNAL DIVISIONS After entering Configuration mode the display will show FO CAL Press Co twice and the display will show the internal counts Press and Co simultaneously to exit 7 5 SETTING THE BACKLIGHT MODE After entering Configuration mode the display will show FO CAL Press Co three times and the display o i i will show F3 BT Press to enter then press LOJ to change the backlight mode AU automatic OFF rare desactivated ON always activated Press and Co simultaneously to exit 49 MCEPS56EN03 3 USER S MANUAL CELY Ser
3. E D User s Manual Ref 49 MCEPS56EN03 Rev 03 PS 50 60 ONLY WEIGHT SCALES CELY Series PS 50 60 CONTENTS 1 INTRODUCTION 2u220220200e00r0neenesnnenssnnesnenonensnesnnenernnennennnenensesnnensnnesnnenssnnennennnnsnnesnsenssnnensssnnenesnnenssnnsnennnensesenne 1 2 SPECIFICATIONS csccsssssssesssscssrcssscssscssesssssnssssscssnssssscesscsassssscsssenssscessenassnsssesasesssasesasensesesasesssasssnesesscseaeeases 1 3 INSTALLATION cccssssscssssssessssccssescssccsscsessssanesssscssnssssscssscsasesssacsssesassssesenasensuscsasesssasesasensesesanesssacssnesesscssassaees 1 Sls GENERAL INSTALACION ciar iii rice 1 3 2 INSTALLATION OF SERIES PS 50 60 uc eeceeceecsssesceseeseesecseeseeneeseceaeeeeaesaeesecneveeceaeeneeaecaessecaeersnesaesrenarenes 2 4 DESCRIPTION OF KEYS ursuesorsnesnenoronennesnnenernnennennsnennesnsonennnenssnnssnennnenensesnnenssnnennennnnensesnsenesnnenssnnssnensnensssennnen 2 5 DISPLAY C 2 6 OPERATION sesoesosesessnessennssnensesnsenesnnensennrsnennnsnsenesnnenssnnssnennnsnssnesnssnsnsesnnenssnnssnensssnsnsennnensrsnsnsesnnenernnssnensrensssennnen 2 Ole MANUAL ZERO AAA nn ana sans nen sun sn 2 0 2 SETTING THE ARE usa ai air iii cria 2 0 3 CHANGE UNIT OF WEIGHT a Bennett 3 Te CONFIGURATION ivicscccsccocsieccosnssossoscscsocascocesceesesectecnsscssenssccssasesccectoosisesssnsdsveesvessecstoacsecescuiectsuendosdavcsesesascacssseesene 3 7 1 ACCESS TO CONFIGURATION MODE coconi
4. cononcononnnononncnononenononnonennnonnonarnonnonnnnerononennnrnnennnnnc nero nanc arc rananannnos 3 TZ CALIBRATION costs rininistciina indecisa citado 3 Tan CHANGE OE STEP ui iaa 3 7 4 VERIFICATION OF INTERNAL DIVISIONS cooncccncoccononnnoncnnnonnonananonnonanononnonnnonoranononnnrnnoncnnn crono none nnnrananacinos 3 7 3 SETTING THE BACKLIGHT MODE cken SE EEEE ES 3 7 6 SETTING THE SECONDARY UNIT uun ssn een 4 7 7 SETTING TIME FOR AUTOMATIC OFF MODE SLEEP cceccesssccssesesesecereeeeseceseecneeercaeeeeseecateeeenereees 4 7 8 SETTING HIGH OR LOW SPEED ocio ie q 4 8 BATTERY OPERATION essersosssonssorsnssnnssnnssnnesnsssnessusnsnrsonsnonsnnnsnnnsnnssnnesnnssnnssnnssunssnrsnnsnansnansnnnsnnnsnnssnnnsnnssnensnnns 5 9 ERROR CODES u sussusssusssessoessonssansnunsnnnsnnssnnssnnssnnnnnensnsnsnrsnnsnonsnnnsnnnsnnssnnssnnssnnsnnnssnnssnssnnsnansnansnnnsnnssnnssnnesnsnsnensnnns 6 49 MCEPS56ENOS USER S MANUAL CELY Series PS 50 60 1 INTRODUCTION NOTE These scales are not allowed for the uses mentioned in paragraph 2a of the article 1 of the Directive 90 384 CE therefore they are not valid for commercial transactions The series PS 50 60 offers a precise rapid and versatile only weight scales for all uses There are 3 weighing scales models in this range The platform size is 190mm x 230mm and the capacity ranges from 3 kg to 15 kg All keypads are sealed membrane switches are colour marked and displays ar
5. e easy to read large sized liquid crystal displays LCDs The LCDs are equipped with a backlight All units include tare zero change unit of weight change division function Weighing scales series PS 60 is equipped with dust and liquid protection equivalent to IP 68 2 SPECIFICATIONS PS 50 60 SERIES Model no PS 50 60 3 PS 50 60 6 PS 50 60 15 Range 3kg 6kg 15kg Step 19 0 59 29 1g 59 29 Resolution 1 3 000 or 1 6 000 Maximum tare 3kg 6kg 10kg Minimum weight 20g 10g 40g 20g 100g 40g Plate size 190mm x 230mm Units of weight kg Optional functions Beeper backlight stainless steel plate 3 INSTALLATION 3 1 GENERAL INSTALLATION The scales should be placed on a firm even surface Avoid extreme temperatures Do not place the scales in direct sunlight or near air conditioning vents Avoid unstable tables The tables and the ground should be firm and not vibrate Do not place the scales near vibrating machinery Avoid unstable electricity sockets Do not use the scales near equipment with high electrical power consumption such as soldering equipment or large motors Avoid high humidity that can cause condensation Do not submerge the scales in water Avoid draughts such as those from fans or open doors Do not place the scales near open windows Keep the scales clean Do not stack anything on the scales when they are not in use 49 MCEPS56ENOS 1 USER S MANUAL CELY Ser
6. g it into an electricity socket It is not necessary to switch on the scales Recharge the battery for 24 hours in order to completely recharge it Immediately below the count display there is a LED to indicate the battery charge status When the scales are plugged into the mains the internal battery will be charged A green LED indicates that the battery is fully charged A red LED indicates that the battery is almost totally discharged and yellow means that the battery is being recharged In the course of use the battery may lose its capacity to be fully charged If the battery does not last long enough please contact your distributor Note new batteries are only partly charged Before using the scales insert and charge the battery following the instructions provided below Some batteries will perform better after several full cycles of being charged discharged Battery performance depends on many different factors including the configuration of the backlight and operation Never use a damaged battery charger or battery Never short circuit the battery An accidental short circuit may occur if a metallic object coin paper clip ballpoint pen makes a direct connection between the battery s and poles the battery s metal connectors and this may occur for example if the battery is carried in your pocket Short circuiting the poles may damage the battery or the object that causes the connection Do not throw batteries in
7. gain Use to set the display to zero If the problem continues contact your distributor or CELY for assistance The A D converter values are out of the normal range Remove the weight from the scales if there is excessive weight and check that the platform is in position Err 6 A D out of range This error may indicate that the platform or electronics may not be working correctly If the problem continues contact your distributor or CELY for assistance 49 MCEPS56ENOS 6 USER S MANUAL CELY Series PS 50 60 DECLARATION OF CONFORMITY I 150 9001 Manufacturer u PS 50 60 Series The aforementioned manufacturer declares that the apparatus described herein complies with the requirements contained in Directive 89 336 CEE and 73 23 CEE and where applicable to the following harmonised regulations ED EN55022 Class B EN61000 4 2 EN61000 4 3 EN61000 4 4 EN60950 Ref 49 MCEPS56EN0O3 Rev 03 02 09 05 49 MCEPS56ENOS 7 USER S MANUAL
8. ies PS 50 60 3 2 INSTALLATION OF SERIES PS 50 60 Weighing scales series PS 50 60 uses an AC DC voltage adapter and can also be used with a rechargeable battery Please check that the power supply voltage matches that stated on the adapter The socket for the voltage adapter is situated under the scales 9 Make a weight calibration as shown in paragraph 7 2 Calibration 4 DESCRIPTION OF KEYS KEY DESCRIPTION PRIMARY FUNCTION SECONDARY FUNCTION This switches the scales on and off TARE Press this key to tare the scales Keep the key pressed for 4 seconds in Sets parameters and other functions UNIT order to change the unit of weight Q Sets the scales to zero Selects each parameter and its respective options 5 DISPLAY The LCD display shows one value and different signs under the digits a zero indicator stability indicator NET _ tare indicator current weight in net weight mode Bat Lo low battery indicator Charge the battery when this indicator lights up Kg current unit of weight is kgs Lb current unit of weight is lbs 6 OPERATION 6 1 MANUAL ZERO SETTING Press Co at any time in order to make a manual zero setting When the zero point is obtained the display will show the zero indicator The scales are provided with a manual zero setting function in order solve minor problems in weight deviation or accumulation of materials on the platform 6 2 SETTING THE TARE
9. ies PS 50 60 7 6 SETTING THE SECONDARY UNIT After entering Configuration mode the display will show FO CAL Press Co four times and the display will show F4 unt Press to enter then press L to change the secondary weighing unit Press and 9 simultaneously to exit 7 7 SETTING TIME FOR AUTOMATIC OFF MODE SLEEP In Configuration mode the display will show FO CAL Press Co five times and the display will show F5 oFF Press to enter then press 9 to change the time until entering in sleep mode options oN 3 5 10 and 20 minutes Press and Co simultaneously to exit 7 8 SETTING HIGH OR LOW SPEED After entering Configuration mode the display will show FO CAL Press Co six times and the display will show F6 FLT Press to enter then press 9 to change the average time before the filter starts operating options 1 2 3 4 If the value is high the weight is more precise Press and Co simultaneously to exit 49 MCEPS56EN03 4 USER S MANUAL CELY Series PS 50 60 8 BATTERY OPERATION The weight indicator can operate with batteries if required The battery will last approximately 100 hours When the battery needs recharging the symbol BAT LO is shown on the indicator The battery must be recharged when this symbol appears The scales will continue to work for about 10 hours and then they will shut down automatically to protect the battery To charge the battery simply plu
10. to fire Discard batteries in accordance with local policy e g recycling bin Do not discard batteries in home rubbish bins Avoid charging the battery in a poorly ventilated room In order to maximise battery performance Always use original batteries and AC adaptors The scales guarantee does not cover damage occurring as a result of the use of any other batteries and or chargers that are not the originals The AC adapter output voltage is 9V but normal voltage ranges go from 11 to 15V New batteries and batteries that have been stored for a long period of time may take longer to charge Keep the battery at room temperature or similar temperature when charging Do not expose batteries to temperatures of less than 10 C or more than 45 C After a long time batteries gradually lose their charge capacity and require longer charging times This is normal If you charge the battery regularly and observe that the operating time is decreasing or the charging time is increasing it would probably be wise to purchase a new battery 49 MCEPS56EN03 5 USER S MANUAL CELY Series PS 50 60 9 ERROR CODES en DESCRIPTION SOLUTION Remove the weight from the scales Ol Above the range If the problem continues contact your distributor or CELY for assistance The scales were not correctly set up in the zero range or they were switched on when was pressed LO Err 4 Zero setting error Remove the weight from the scales and try a

Download Pdf Manuals

image

Related Search

Related Contents

Manual - Westermosales.com    Black & Decker MX151R Use & Care Manual  AFS-Friseur & Kosmetik PoS 1 - AFS  Philips Bodygroom body groomer BG2028/42  取扱説明書  SUN2000 (8KTL-28KTL)  View / the Complete Manual  

Copyright © All rights reserved.
Failed to retrieve file