Indoor Intelligent Triple Technology PIR Motion Detector User Manual
Contents
1. Testing and Usage With 12V prower supply the detector is in self testing state and red LED flashes The LED goes off after 60 seconds and the detector is in working state Walk across detection area and watch the LED indicator to make sure the red LED light up when detecting the movement Notice Avoid mounting the detector close to places where heat changes fast or air stream flows frequently ie Air conditioner tube light oven waver refrigerator etc Avoid it facing to window which can be easily interfered by complicated environment ie sunlight crowds or flowing cars etc The product can reduce the possibility of accident but the user is advised to take all necessary precautions for the safety and the protection of the property NA T Printed in China 2013 V1 02. China 2013 V1 0 LED On Jumper It is used to control LED indication without interference to detector LED on jumper can be interrupted after testing for concealment Infrared Sensor Detects the infrared rays released by human body motion Please do not touch the surface and keep it clean Microwave VR It is used to adjust the detecting range of microwave according to customer s request Default setting the largest detection range Tamper Switch Once the case is opened in the detector s working state the tamper switch will be triggered generating an alarm signal Status Indicator Green LED On Red infrared triggered Yellow LED On Microwave triggered Red LED On Alarm activated Installation 1 The triple technology detector should be installed in entry or exit which intruder can easily enter 2 The detector is more sensitive to cross movement than to direct movement The performance of detector is optional when detection direction is across the walking direction of intruders 3 Fix the bracket of detector in the wall open the front cover and take out the PCB attach the back cover to the bracket with screws 4 Fix the PCB in the back cover and then cover the case 5 Keep LED indicator at the right direction The fixing height is about 2 2 2 from the ground 6 Adjust installation height or bracket to change the detection distance and angle Detection Area 2 2m NET Side view Top view
3. Indoor Intelligent Triple Technology P1 R Motion Detector User Manual PIR 918C OOO Le ooo a _e00 AY 2 o9 H O 40 Q B x o fe Q fe ee 1 Terminal Block 6 LED On Jumper 2 Microwave Module 7 Relay Jumper 3 Yellow LED 8 Dual Infrared Sensor 4 Red LED 9 Microwave VR 5 Green LED 10 Anti tamper Switch Triple technology detector combined microwave and passive infrared with intelligence adopting advanced signal analysis technology avoiding various kinds of false alarms under worse environment It is used in banks warehouses and houses etc Features Adopted MCU Automatic pulse count Doppler Power analysis X Band plane antenna icrowave detecting range adjustable Auto temperature compensation reducing false alarm Value adjustable technology with high anti interference signals Unique look down design without dead angle ntelligence technology differing intruder from interference signals Specification Power Supply 12V Coverage 12m 110 Transmit Distance 80m open area Self testing Time lt 60s Detecting Mode Dopper power analysis Infrared Sensor Dual low noise PIR Microwave Antenna plane antenna with high frequency oscillator Ga As FET Microwave Frequency 10 525 GHz Temperature 10 C 50 C amp Detector Dimensions L x W x H 152 X 60 X 82 mm Printed in
Download Pdf Manuals
Related Search