Home

Sedimentary Structures Layer

Contents

1. Transfer Options V Automatic Description transfer Transfer to Annotation Group _ lithtext1 X V Transfer Depth Range V Top Depth Only V Transfer Short Form Dictionar The 4 button activates the Geology Dictionary window that allows you to add edit and delete abbreviations and long forms from the expansion dictionary The M Ascending check box when activated will advance the Top Depth with the Base depth value This will only be Start New Record implemented when the record is saved and the option is chosen If the Ascending check box is not activated the descending order will be implied and the Top depth will be place in the Base depth field The Interval button displays a list of descriptions that have been entered to date for the current well To Long D oe The To Long Desc button expands the text you have typed in the Short Description field and places them in the Long Description field To Short Desc A The button abbreviates the text you have typed in the Long Description field and places them in the Short Description field Automatic Description Transfer Options Transfer Options W Automatic Description transfer Transfer to Annotation Group lithtest if Transfer Depth Range i Top Depth Only i Transfer Short Form The Automatic Description transfer check box Ww when activated will automatically transfer the sample description to the log when it is saved It will transfer with the options spec
2. Lost Core This selection allows the user to define a Lithology interval on the Ha Sampl log with a no data description as shown on the right Over Burden Base Contact Slossiunaites Once a Lithology interval has been defined or selected and can be viewed in the builder the user can click drop box and add a basal contact _Clear Fields This button will clear all the fields in the Rock Type builder The user can then start fresh This button will close down the Rock Type builder Addendum Manual Version 9 0 page 96 POWERXSUITE Addendum User Manual Version 9 0 Drafting an Interpreted Lithology Interval 1 Double click anywhere within the Interpreted Lithology track to activate the Rock Type Builder window as well as your Favorites List Toolbox Rock Type Builder Rock Type Interbeds Accessory Save Del i E44 to 1 653 5 Eee es cg sand cg i Confirn Delete Sample Quality vl No Data Description zl lf Snap to Lithology r EF Glossifungites E dit Favorites Toolbox Clear Fields 2 Select a rock type There are 4 ways to select a rock type some faster than others e The user can click on the desired Rock Type from the Favorites Toolbox shown to the right e The user can right click anywhere within the Interpretive Lithology track to activate the pop up menu shown below Then select by clicking once on the desired Rock Type from the pop up menu e The user can select a Rock Type f
3. S every time you finish entering a new record Editing a Core Description 1 o First P Y Next Last Use the Database Navigational Tools Fist Prev 2 Nex Last to navigate through the records See the Database Navigational Tools section later in this User Manual for more information Or Click on the interval button to view a list of Core Descriptions and then double click on the interval that you wish to edit Once the selected interval is displayed in the Core Description window make any changes you feel are i a l necessary Click on the button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Deleting a Core Description 1 ae First P Y Next Last Use the Database Navigational Tools Fist Prev Next Last to navigate through the records See the Database Navigational Tools section later in this User Manual for more information Or Click on the Interval button to view a list of Core Descriptions and then double click on the interval that you wish to delete Del Click on the Delete button Addendum Manual Version 9 0 page 43 POWER SUITE Addendum User Manual Version 9 0 Yes 4 The user will be prompted with a confirmation Do you really want to delete Click on the ots button Field Restriction Table Intervals From amp To Mandatory Rock Type Mandatory Short Description 63 535 Optional For another way on
4. Feast Feed M Dippie erties Oaentation Leper Hane kemter Shage H i Display Scale Placement C Displey at hop Deploy at tng M Display Bachup scales a M Display poles on non active levers Evar Sha ak Dipa Full Logasthnes Scale w Depa Dheoth use Gid I Dispiy Chat dus Grid Format 1 Short Names Format 2 Long Names Note When you add any layer to a log it is always associated with a Data Type Every Data Type in Power Log Core amp Curve has a default setting The default settings for a Formation layer are shown below To access this E window click on the T Layer Configuration button on the Toolbar when the Formation layer is active and then click on the Formation and Age Display Tab Active Layer Configuration Formation Tops Layer Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions Formation Display r Age Display Formation Long Name Display on Layer Format 2 M Group gif Formation Short Mame Display on Layer Format 1 lf Formation Period Format e Member Stage Display attop Display at top Cancel Help Note When you add any layer to a log it is always associated with a Data Type Every Data Type in Power Log Core amp Curve has a default setting The default settings for an Ages layer are shown below To access this Ez window click on the LA Layer Configuration button on the Toolbar when the Ages laye
5. 3 Notice that the default scale when the percent was originally added to the log was 0 to 100 as you would see in your window To change the original scale from 0 100 to 0 20 simply adjust the Left Scale value to 40 by double clicking in the Left Scale field and typing in a value of 420 4 The user can also change the layer si pattern by ee the Linear Cycles portion of the window Say 5 Click on the Seve button and select t I from the System Message window to exit the Layer Configuration window Addendum Manual Version 9 0 page 137 POWER SUITE Addendum User Manual Version 9 0 Multi Array Data Layer The Multi Array Data Track can be added either as a track or a layer to your log When you add a Multi Array as a layer to your log you must assign it to a specific track How to Add a Multi Array Track mi 1 Click on Log Configuration Builder under the Options menu selection or click on the m Log Configuration Builder button on the Toolbar to activate the Log Configuration Builder window Log Configuration Builder dirala Loge Autores Lij top svsteM Legt Log bit grade i Tracks Gere Errar m Bd Al pry Shew Al 118 Gija Rolas yr G20 Dae tr aa EA i Lihai Dhereription Bd r AN MDT Er Seje Mial Liai riris 5 Oa Show Th Fetes we rT 015 Fapa Type pe 7 Sy Peters Higi j Track width F Legiwadiy 229 hirae cL Laver Config ba gadel diiio Toga oal Hii f
6. SubInterval Sequence Fining Upwards w Soft Edge Coarsening Upwards Hard Edge Blocky Edit Options Exit 6 Press the Esc key on the keyboard to exit from the Carbonate Texture Builder window Deleting a Sub Interval Addendum Manual Version 9 0 page 119 POWER SUITE Addendum User Manual Version 9 0 1 Make the Carbonate Texture Matrix layer active within the Carbonate Texture track by clicking on the track and then selecting the Carbonate Texture Matrix layer from the Layer Selection List field 2 Double click on the Carbonate Texture Matrix layer to expand the Carbonate Texture track and to activate the Carbonate Texture Matrix Builder window 3 On the Carbonate Texture Matrix layer right click anywhere within the sub interval that you wish to delete to activate the pop up menu shown below Delete Sub Delete Entire Entire Interval Sequence SubInterval Sequence w Soft Edge Hard Edge Edit Options Exit 4 Click on Delete Sub and the Carbonate Texture Matrix sub interval will be deleted accordingly 5 Press the Esc key on the keyboard to exit from the Carbonate Texture Matrix Builder window How to Change the Carbonate Texture or Carbonate Texture Matrix Scales Carbonate Texture scales can be changed through the Layer Configuration window 1 Click on the E Layer Configuration button on the Toolbar when the Carbonate Texture or Carbonate Texture Matrix layer is active This will activate the Layer
7. 2008 fx Save Undo New Del P Nesa Last Annotations Sample Interval 665 to 770 Descriptions Lithology Description To Long Desc BBS 697m Se kt gy Ik gy brn m ec gr occly w c gr modly w srt shang sbrdd gtz oce mica flks tr fld tr chlor sl trs dolic cmt predly disagad g est intgran por 16 2072 tr ptch brn o stig bri yel flor g inste stmg mky vel cut flor 697 701m Dok lt brm mics arg akty amp aren drs nvhs 01 74am Se It gy It bra m c gr w srt shang sbrdd gtz com micas lks tr fld tr chlor sl tre dolic cmt predly disagad g est intgran por 18 242 ptch brn o stng br vel flor g insts strag mky yel cut flor 43 745m Dol lt brn mice allp arg sity drs nyha 45 77 0m Se It gy It gush brn E c gr modly w art shang sbrdd gtz com micas lks mnr fld tr chlor tre dolic amp sile cmt tr cly mts predly disaggd g est intgran por 18 2422 com brio stag bri yel flor g insts bri vel cut flor 8 Type in the From and To Interval fields in this Lithology Summary window 9 Click on the fea Deke button if you want the abbreviated descriptions expanded to a long form 10 Click on the aie button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Gas Summary las This is the window that appears when you click on the Gas button The Gas information can be printed out for each report date in the Morni
8. Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions p Annotation Group Directional Survey Detailed Lithology Group Generic Category Graphics Dip Meter Group MDT Run No Cancel Help Once a field in this Layer Configuration Tab dialogue window has been changed the user must then click on the 5 aus button or press ALT S Annotation Group Button The Annotation Group button allows you to associate an existing Annotation Group with the Annotation layer active within the Layer Configuration window at the time Each Annotation Group has a unique Group ID as they are assigned when a new log is created for a well So for every annotation layer that is associated with a well there is a new Annotation group created Accordingly if you have multiple Annotation layers associated with a single well then you will have to assign a unique Group ID number to each of the Annotation layers within each of their respective Layer Configuration windows For example Comments is an Annotation layer that when a well log was first created was assigned an Annotation Group ID of Comments1 with its own Layer Configuration window Meanwhile Remarks is another Annotation layer in that same well log creation that has been assigned Annotation Group ID Remarks1 within its own Layer Configuration window If another log is created for the same well that has bo
9. Formation and Age Display Dip Meter Definitions Savel Undo Data Type Mame Bioturbatiorn Wal Display Layer Name or Curve Scale on Track Foreground Color black hai Show L Track mia Depth Offset Display Vertical Orientation Layer Name Display Scale Placements Eyer Start at Display Backup scales Display scales on non active layers Display Full Logarithmic Scale Display Depth Asis Grid Display Data 4sie Grid Cancel Help Addendum Manual Version 9 0 page 127 POWER SUITE Addendum User Manual Version 9 0 Trace Fossils Layer This layer allows you to add or delete trace fossils in the Power Core application There are two types of trace fossils layers There is a Bed Restricted BR and a Non Bed Restricted NBR layer types The bed restricted BR layer type is like a typical rock property layer sorting rounding grain size where you have to have a rock type in order to enter a trace fossil The trace fossils are also restricted to the bed you are drawing in Also when the bed is resized or deleted the trace fossils may be also resized or deleted if the trace fossils interval coincides with the beds resized or deleted interval The non bed restricted NBR layer type is not associated with any rock type or bed and can be entered anywhere the user wishes and will not be affected by the resizing or deleting of a bed Adding a Trace Fossil Note All bed restricted description categories suc
10. Optional Optional MDT Data Window This report allows you to enter MDT Data manually or view the data once it has been imported through the Import MDT Data Utility The MDT locations can be viewed on the MDT layer Oo LOY Adding an MDT record manually 1 Click on MDT under the Reports menu selection 2 Click onthe o Data button This will activate the MDT Data window Addendum Manual Version 9 0 page 64 POWERXSUITE Addendum User Manual Version 9 0 MDT Data Run 1 Undo New Del Nest Last Th Display Depth Ig Seq Ho MD TVD SSL EFW a o2 202 799 0 995 Hydrostatic Pressure Formation Before After Pressure Temp Mobility 2500 77 2002 44 1803 32 67 1 720 41028 Formation Red Sky Formation Comment Al OE Pressures quite good Mew 3 Click on the button or press ALT N and then fill in the report window with your data Save 4 When you have finished adding your data click on the button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Editing MDT Data 1 Click on the _List button to view a list of MDT Data to date and then double click on the record that you wish to edit First P Next Last 2 Or use the Database Navigational Tools Fist Prev Next Last to navigate through the records See the Database Navigational Tools section later in this User Manual for more information
11. Utilize the options in the RTF Font and RFT line and box toolbars to get the desired effect on your annotation 6 Click anywhere outside the annotation box to close the toolbars Repeat steps 2 6 for more annotations Litholagy Description Drawing a Line A Line can be associated with an existing Annotation Lithology Description or it can exist on its own How to Draw a line in the Annotations Lithology Descriptions 1 Make a Lithology Description or Annotation layer active by clicking on the track that has an Annotation layer on it and then selecting that annotation layer you want to work with from the Layer Section list on the Selection Toolbar 2 Define an area or box outline by clicking and dragging the left mouse button from the upper left corner to the lower right corner of the desired area to form a rectangular shape and then releasing the left mouse button on an Annotation layer to activate the RTF Font and RTF Lines and Boxes toolbars shown below Or just click on an existing annotation that does not have a line associated with it Bold ltalizised RIF Box Centre Font Type l RTF Box Left i Style and size Underline PU Strikethrough Display Scale RTF Lines and Boxes Text Left Tet Eight Line Style Line Thickness Tert Centred Font Background Color Display Text Talamai bine Font Color Tail on Start of Line Papeete Display Line Tab Lett Arrow on End of Line Bullets Display Box Outline Arrow on Start of Li
12. arg com thy por 1 3 com brn o stng fr omg yel flor fr stmg mky yel cut flor Long Description Dolomite To Short Desc medium brown occasionally dark brown cryptocrystalline very argillaceous common earthy porosity 1 3 common brown oil staining fair orange yellow fluorescence fair streaming milky yellow cut fluorescence Transfer Options V Automatic Description transfer Transfer to Annotation Group _ lithtext5 X V Transfer Depth Range V Top Depth Only l Transfer V Transfer Short Form Dictionar The 2 button activates the Geology Dictionary window that allows you to add edit and delete abbreviations and long forms from the expansion dictionary The Auto Next button takes the last value saved to the Interval To field and places it in the Interval From field Then it places the cursor in the empty Interval To field and waits for the user to enter a new value Addendum Manual Version 9 0 page 38 POWERXSSUITE Addendum User Manual Version 9 0 The Auta Ine button adds the amount entered into the Auto Increment field the default is 5m to the Interval From and Interval To fields The M Ascending check box when activated will advance the Top Depth with the Base depth value This will only be Start Mew Record implemented when the record is saved and the option is chosen and then the Auto Next or the Auto Inc buttons are activated If the Ascending check box is not activated the de
13. by clicking on the ak button 5 Press the Esc key on the keyboard to exit from the Interbedding window Drafting a Lithology Interval with Lost Core No Sample or Overburden 1 Double click anywhere within the Interpreted Lithology track to activate the Rock Type Builder window shown below as well as your Favorites List Toolbox Rock Type Builder Rock Type Interbeds Accessory Del ieee 1693 W Confirm Delete Sample Quality H No Data Description Lt Core W Snap to Lithology Bae Conadi Edit Favorites Toolbox Clear Fields Exit 2 Select either Lost Core No Sample or Overburden from the No Data Description drop box Addendum Manual Version 9 0 page 100 POWERXSUITE Addendum User Manual Version 9 0 3 Click and drag the mouse button up or down within a specific track to define the No Data interval Or If there is a rock type defined above and below within 100 meters and you want to fill in the interval simply double click in the interval and it will fill in with the No data type selected 4 Release the mouse button and the interval will be drawn accordingly 5 Press the Esc key on the keyboard to exit from the Rock Type Builder window Inserting Thin beds You are able to insert thinner beds of a different Rock Type into an existing bed This prevents you from having to re enter the properties of the main bed above and beneath the inserted thinner bed The Rock Accessories Thin beds Compon
14. ot e ez g ru vv m 22a Be mx gt a R m S A a ES ae Note The user can get easily to the first letter of the Accessory they wish to select by clicking once in the appropriate field in the Rock Accessory builder to highlight a selection and then typing in the first letter of the component they wish to choose This will refresh the list with the first letter and then the user can scroll through the selection until they see their selection and click to select 5 Click anywhere within the Interpretive Lithology track to insert the selected Accessory The Toolbox can be activated or deactivated by clicking on the Toolbox button within the Rock Accessory Builder Window Drawing an Internal Bedding Contact This selection is only available to the users who have the Power Core Module 1 Double click anywhere within the Interpretive Lithology layer to activate the Rock Type Builder 2 Right click anywhere within the Interpretive Lithology layer to activate the pop up menu shown below or click on the Accessory button in the Rock Type Builder window Rocks gt Base Contact gt Save Delete Edit Options gt 3 Click on the Acc Builder selection from the pop up menu to activate the Rock Accessory Builder window and the Accessory Favorites List Toolbox 4 The user has 2 ways to choose an internal bedding contact e The user can select a Contact Symbol from the Contact Type fields within the Accessor
15. 0 How to Change the Sedimentary Favorites Selection 1 4 2 sedimentary Favontes Click on the button in the System Options window to activate the Sedimentary Favorites window shown on the next page Sedimentary Favorites Sedimentary Favorites Selected 26 Beddings Cross beddings cheyxbdg chevron cross bedding a om bed Centimeter Bed a dm bed Decimeter Bed hebnxbdg herringbone cross bedding Laminations Cross Laminations clmbrip climbing ripple cross lamination Ab contort Contorted slumped laminations cppxlam current ripple cross lamination flasrlam flaser laminations ballpill Ball and pillow structure z biotrbb Bioturbated barren biotrbe Bioturbated churned 2j biotrbm Bioturbated moderately v Set List Size 26 Clear Al Cancel Clear All pa Click on the Ceara button in the Sedimentary Favorites list window to prepare it for the selection of your Sedimentary Favorites Select by clicking on or highlighting some of your more commonly used sedimentary structures from the list window OF Click on the button to return to the System Options window Click on the Save button in the System Options window when you are finished Fractures Favorites Button Fract The _ Fractures button when activated allows the user to determine the number of favorites for their favorite Fractures list and then displays them in a pop up menu generated by a righ
16. 12 2 Licensee ABC Oil Resources Ltd License 1 424 Operator ABC Dil Resources Ltd Pool Lamba C Pool Field Anywhere Drilling Contractor Total Deepmess 35 Elevations ee l Reference Ground Ground Collar 21 1 Province State Alberta Country Canada Surtace Coordinates EB 24 9 Casing Flange 21 08 Latitude ih 2148 A S 324 23 meters North of the South boundary of Sec 29 45 12 wid Longitude 1 0 0577 EW 310 12 meters East of the West boundary of Sec 23 45 12 wiat Intermediate Casing Point Coordinates Latitude ih 214r N5 324 26 meters North of the South boundary of Sec 23 45 12 wid Longitude 1 O05 FF EAW 1310 12 meters East of the West boundary of Sec 23 45 12 Wh Bottom hole Coordinates Latitude ih 2151 N S 710 5 meters North of original Surface Location Longitude 1 0 0578 EAM 262 04 meters West of original Surface Location UTM Surface Coordinates Northing 6349970 4 Easting 470028 2 Hole Direction Horizontal Faulbed W Deviated Depths Orillers T D Drillers T D Drillers T D Drillers T D Loggers T D Loggers T D Tali MDO Tally TYO Strap MO Strap TWO ME TYD 1037 3956 hos 3956 fas 394 06 KB to Ground Cut Fill Plugback Sidetrack Water Depth Reference Mean Water Depth 125 Hole ID Hole 1 plus 24 Date Time Work Schedule Spud Feb 25 2001 22 15 Curves To Mar 200106 15 Mud Types Rig Release Mar 10 2001 12 00 Dir Surveys l
17. 2 Numeric Optional Curve Line Pattern 5 Character Optional Curve Line Style 10 Character Optional Depth Offset 5 2 Numeric Optional POWERXSUITE Addendum User Manual Version 9 0 Delete Generic Groups The Delete Generic Groups window allows you to delete a generic group 1 Click on the Delete Generic Groups selection located under the Edit pull down menu This will activate the Generic Groups window shown below Anybodies Oil Sands Log Core Samples Dep Complex Dep Env Cancel Depostional Environment diagenesis environments Facies Facies Assoc Fiss Formation HCI Reaction Horizontal Fractures a Delete 2 Click on the Generic Group Name that you wish to delete and click on the button This will activate the Database Data Warning window Database Data Warning x WARNING This could affect other logs that may use these fills re you sure you want to delete this Fill Group and all of it s associated Fill Patterns Yes No Cancel 3 Click on the Lores luton and the Generic Group will be deleted Generic Group Sorting Edit pull down menu item The Generic Group Sorting allows the user to view all the generic groups and order the group list into a format that is sensible to the user rather than our default that would be alphabetically How to sort a Generic Group List 1 Click on Generic Group Sorting under the Edit menu selection If any Generic Groups have been added to the Da
18. 3 Once the selected interval is displayed in the Core Plug window make any changes you feel are necessary Save Click on the Seve button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Deleting MDT Data 1 Click on the List button to view a list of MDT Data to date and then double click on the record that you Del wish to delete Once the selected record is displayed in the Core Plug window click on the Delete button a First F Y Next Last 2 Or use the Database Navigational Tools Fist Prev Newt Last to navigate through the records See the Database Navigational Tools section later in this User Manual for more information Select the record you Del wish to delete and it will be displayed in the Core Plug window Then click on the Delete button Ves 3 The user will be prompted with a confirmation Do you really want to delete Click on the o button Undo The button will restore the window to the settings of the last saved record You can Tab between fields or press Shift Tab to move backwards between fields Field Restriction Table Addendum Manual Version 9 0 page 65 POWER SUITE Addendum User Manual Version 9 0 Depth MD Depth TVD Depth SSL Display Depth MD Note When you add any layer to a log it is always associated with a Data Type Every data type in Power Log Core amp Curve has a default setting The default
19. 3 5 L Medium Pebbles Upper f 12 00000 16 00000__ 3 5 to 4 0 Coarse Pebbles Coarse Pebbles Lower _ 16 00000 24 00000 4 0 to 4 5 L Coarse PebblesUpper _ f 2400000 32 00000__ 4 5 to 5 0 Very Coarse Pebbles __ Very Coarse Pebbles Lower 32 00000 48 00000__ 5 0 to 5 5 L Mery Coarse Pebbles Upper 48 00000 64 00000__ 5 5 to 6 0 Lower Cobbles ______ Lower Cobbles Lower 6400000 96 00000__ 6 0 to 6 5 po Lower Cobbles Upper f 96 00000 128 00000__ 6 5 to 7 0 Upper Cobbles Upper CobblesLower 128 00000 192 00000 __ 7 0to 7 5 L Upper Cobbles Upper O f 192 00000 256 00000 __ 7 5 to 8 0 Lower Boulders Lower Boulders Lower 256 00000 384 00000 8 0 to 8 5 L Lower Boulders Upper f 38400000 512 00000 8 5 to 9 0 Upper Boulders Upper BouldersLower _ _ 512 0000 768 0000__ 9 0 to 9 5 L Upper Boulders Upper 768 00000 _1024 00000__ 9 5 to 10 0 Addendum Manual Version 9 0 page 91 POWER SUITE Addendum User Manual Version 9 0 How to Change the Grain Size or Grain Size Matrix Scales Grain Size scale can be changed through the Layer Configuration window 1 Click on the Layer Configuration button on the Toolbar when the Grain Size or Grain Size Matrix layer is active This will activate the Layer Configuration window tab dialogue window 2 Click on the Layer Scales tab shown below Active Layer Configuration Grain Size Eg Layer Display Settings Curve Definitions Layer Scales Data Group ID
20. Cht foss T Glac Till Move OK O Ap ee Click on Systems Options under the Options menu selection This will activate the System Options window IF Click on the aaae Selbee button This will activate the Lithology Sort Order window shown above Select the Rock Type the user wishes to move by clicking on the rock type once This will highlight the rock type Click on the o Move button The Move button will then transform into a Mets SEN button Select the Rock Type you wish to move the previously selected type above by clicking on the new rock type The previously selected rock type will now be placed above or to the left of the rock type you just clicked on If you wish to change the order of more rock types proceed with steps 3 5 If you are pleased with the newly rearranged Lithology Rock order click on the ox button This will close the Lithology Sort Order window and put the user back into the Systems Options window Then click on the HE button in the System Options window Sedimentary Favorites Button Sedimentary Favorites The button when activated allows the user to determine the number of favorites for their favorite Sedimentary Structures list and then displays them in a pop up menu generated by a right click in the Sedimentary Structures layer track along with a tool box when the layer is activated Addendum Manual Version 9 0 page 81 POWER SUITE Addendum User Manual Version 9
21. Del Dal 1675 00 to 1680 50 Entire Interval midst Mudstone to dst Mudstone Sequence Sub lnteryat ta Sequence W Snap to closest lithology W Dbl Click Interval Entry I Soft Edges 3 Click and drag the mouse pointer from a specific Measured Depth and Carbonate Texture as indicated within the mouse pointer display box to another Measured Depth and Carbonate Texture e g 1204 00 floatstone to 1209 60 rudstone on the Carbonate Texture track prea real 4 Release the mouse button and the entire Carbonate Texture Matrix interval will be drawn accordingly Note If you want to fill in the entire interval with only one Carbonate Texture and not a range of textures and you have the Dbl Click Interval Enty selected in the builder simply double click in the interval the carbonate texture you wish to enter and it will fill in the entire interval with your selection 5 If you wish to see a different type of sequence and the user has previously dragged the entire interval right click within the interval to be changed and select the Entire Interval Sequence selection and select one of the appropriate selections The carbonate texture matrix appearance will be redrawn to reflect the newly selected criteria Delete Sub Delete Entire Entire Interval Sequence Fining Upwards SubInterval Sequence Coarsening Upwards w Soft Edge Blocky Hard Edge Edit Options Exit 6 Repeat Steps 2 4 to a
22. Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions Savel Undo Data Type Name Rock Accessories uw P Display Layer Name or Curve Scale on Track Foreground Color black r Show L Track Bao o Depth Offset Display Vertical Orientation Layer Name Display Scale Placements Eyer Stark at Display Backup scales Display scales on non active layers Display Full Logarithmic Scale Display Depth Asis Grid Display Data Axis Grid Cancel Help Addendum Manual Version 9 0 page 134 POWERXSUITE Addendum User Manual Version 9 0 Percent Layer Adding a Percent Track Layer Percent can be added either as a track or a layer to your log When you add a Percent as a layer to your log you must assign it to a specific track Adding a Percent Track a im 1 Click on Log Configuration Builder under the Options menu selection or click on the Log Configuration Builder button on the Toolbar to activate the Log Configuration Builder window Log Contigurotion Builder 10 Gamea Ray Y O80 bedeepeeted Lihakogy Y 1 40 GeanSee Deoth 100141501 223w Formation Tops Shot Namel 100741901223 2 On the left hand side of the Log configuration window scroll down the list of tracks and click on the Percent track The track will become highlighted and the Tracks radio button Tracks will become activated 3 On the right ha
23. Dok lt brn mics arg akty amp aren drs nyhe F017 74am Se It gy It bra m c gr w srt shang sbrdd gtz com micas lks tr fld tr chlor al tre dolic cmt predly disagad g est intgran por 18 242 ptch brn o stng br yel flor g insts stmg mky yel cut flor T43 745m Dol k brn mice allp arg alty dns nyha T45 FF 0m Se It gy It gush brn F c gr modly w art shang sbrdd gtz com micas lks mnr fld tr chlor tre dolic amp sile cmt tr cle mts predly disaggd g est intgran por 18 2422 com brm o stag bri yel flor g insts bri pel cut flor 5 Type inthe From and To Interval fields in this Lithology Summary window To Long Desc 6 Click on the button if you want the abbreviated descriptions expanded to a long form 7 Click on the anh button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Transferring Lithology Descriptions from the Striplog 1 Click on the _Annotations button in the Lithology Summary or the Well Formation window to activate the Transfer Sample Description window Select Annotation Group 2 To Select a different Annotation group lithtext gt and Click on the down arrow and select from any group associated with your log The default group is lithtext1 3 Ifthe User has not transferred or utilized any Depths on the striplog you may want to activate the AddCepth check box to add the depth where the annotation is
24. Field Recovery 99 4 DD Dec 12 05 Well Record Data kp bo Goade Acada Raron UTM Easting 634978 0 UTM Northing MESS HoleID Hole4 Edit Well In the Logged by field type in the name of the person who the core is logged by In the Top Depth and Base Depth fields type in the Top Depth and Base Depth of the core sample interval 4 Inthe Depth Corrected Remark field type in the remark related to depth change that you wish to appear at the core log header 5 Activate the Slabbed check box if you wish the core log header to be cut in half This is not applicable to the Sample Log abbreviated Header 6 Inthe Quality Remark field type in the remark related to quality that you wish to appear at the core log header 7 Inthe Remarks field type in any other remarks that you wish to appear on the Core Log header N B The Remarks field is limitless as the Core Header Expands to the appropriate size to accommodate the entire Remarks Field w N Addendum Manual Version 9 0 page 21 POWER SUITE Addendum User Manual Version 9 0 Well Record Data portion of the Core Sample Header window Edit Well 1 Click on the button to enter KB and Ground Elevation The Well window will be shown E Unde Hew pa se E gt New Lex Stamens Me Ogele Move La Lecation rica p AHE Ml Recourse Lhd zi Fog fl mial Fod Dring Coniracior Total Denpmes H PAARA IME Ebris County Eroi Sutace Copd
25. Manual Version 9 0 page 136 POWERXSUITE Addendum User Manual Version 9 0 Percent Layer Percent Clay Back Color Fore Color Color E m Gradient Fatter Snap to W Soft Edges cave 2 Right click on the interval within the Percent track that you want to delete and select Delete from the pop out menu The interval will be deleted To delete all the intervals select Delete All Data instead Percent Silica Delete Delete All Data Edit Options gt Exit 3 Click on the button and the Percent Layer window will be closed Changing the Percent Scale Percent scale can be changed through the Layer Configuration window Es 1 Click on the i Layer Configuration button on the Toolbar when the Percent layer is active This will activate the Layer Configuration window 2 Click on the Layer Scales Tab to show the window shown below Active Layer Configuration Percent Clay Layer Display Settings Curve Definitions Layer Scales Data Group IDe Formation and Age Display Dip Meter Definitions Porosity Grade Scale Percent Layer Scale Dip Meter Scale Grain Size Scale Carbonate Texture Scale Depth Avie Grid Left 40 Right 10 Verbal Settings 5 Style Grain Size Scales to Data Axis Grid Carbonte Texture Scales Type Linear to Units x Dip Meter Quality Scale Range Linear Cycles perl To Major Minor Increment E a 8 Log Cycles Cancel Help
26. Manual Version 9 0 page 75 POWER SUITE Addendum User Manual Version 9 0 Display Tab System Options General Fonts Display Favorites Symbology W Arowed Subintervals Frequency 1 240 1 symbol every 2 l m W Transparent Lithology Profile W Use Global Symbols Interbed Line Display Type W Curve Backup Fill Grain Size Scale Wentworth Verbal Display mm Display C Hard Edges Fill Pattern f Soft Edges Upward hatch left to right at 45 degrees Pattern Color B E Carbonate Textures Fill Pattern Pattern Color W Crosshatch at 45 degrees l HardEdges Solt Edges Interpreted Lithology Layer Show Bedding Contacts w Show Accessories W Monitor Other Hei width Directional Survey display Azimuth inches inches Sidewall Core Run and Core No Cancel Arrowed Subintervals This check box when activated will indicate the top and bottom of your subintervals portion of an interval with an arrow rather than a set of symbols An example is shown below Saunas AUBWaWwIpas savossacay yooy S isso 4 23841 sanpnys AUBaWIPaS sanossasoy yoy S ISSO 4 22841 af T T 2 o 7 H a i pa ce F AG Normal Subintervals Arrowed Subintervals Transparent This check box W when activated this function makes the background of the accessory symbols transparent so that the bed in the background shows through If deactivated a white background surrounds the accessory symbol
27. Name Anoxic Lagoon with bulbous s Yj Inter Bank channel or pass fill ea Paleosol Rubbly Calcrete Foreslope Sand Apron Distal Foreslope Medial Foreslope Bioturbated Medial Foreslope Nodular distal fore reef r YY medial Fore Reef Proximal Fore reef proximal Fore Reef low energy N SS Foreslope Breccia N ANS Save Ordering Select Group Before Move During Move Result of Move 3 Click and drag on the Generic fill you wish to resort and move it above or below the generic fill you want it beside 4 Repeat step 3 as many times as you like 5 Once you have finished Click on the Save Ordering button group by clicking on the Select Group button or you can 6 The user can either select a different i i close this window by clicking on the button Toolbar View pull down menu item Turns the Toolbar on and off This toolbar is dock able and can be moved to different places on the screen We have added removed some more shortcuts to this toolbar Cure Metafile Editor Maintenance Print Log Loy Print Well Configuration eL End i Tack Delete Generic Group C t to DB ONAect ta Edit Core Header garate F Log layer Annotations SEB MRE SE m a mE AP a E t t Log Configuration Calculate Surveys Build ae sample Core Undo Description Transfer Layer Configuration Help it O From DB Open Log Print AM Report i Disconnect Mouse Pointer Help Addendum
28. Planerresnils Even U Seat a Dista Fill Lorm Sooke w Dianty Deeg ds Gad Dci haha Aca Lam How to Edit a Layer Configuration Window 1 Make the desired layer active by clicking once on the track containing the layer to make the track active Highlighted in Green 2 Click on the Layer Selection List located on the Selection Bar top left corner and select the desired layer name contained within the currently active track that you wish to edit or make changes to Ez 3 Click on the Edit pull down menu and select Layer Configuration or click on the Ls Layer Configuration button on the Toolbar to activate the Layer Configuration window Layer Contig Note You may also access the Layer Configuration window by clicking on the button within the Log Configuration Builder window once you have highlighted the layer that you wish to edit 4 Edit the Layer Configuration window according to the specific requirements of each individual layer or data type as to what you would like the layer to look like as outlined in various sections of the User Manual and then click on the Savel button when finished 5 A system message will appear telling the user Record saved successfully Do you wish to Exit Click on Y l l l the button to exit the window and view your changes Display Settings Tab This tab in the layer configuration window allows the user to change the display setting for each individual layer An example
29. These reports can be printed using the Print Well End Report and the Print Morning Report windows The Formations can also go on the striplog as a Short Name Long Name with TVD and SSL Depths and expanded format along with the Ages The user can also choose between showing the Prognosis Sample or Log tops on the Striplog Well Formation Save Undo New Del 9 Next Last KB Ground Casing Flange Alignment Short Long aa 4 3 21 1 21 08 center Group Boundary Type cont conformable Formation t fTidsdale OOOO Fault Type Member mts Main Tidsdale Sand Seg jo Long Hame Display Depth Subsea 353 98 Seres Tops lower MD TVD Period Stage Prognosis 370 K Cretaceous Aptian Sample 1445 27813 Age million years Thickness 6 44 Log 447 378 88 Calculate Thickness Display C Prog Smp Log EE Annotations Samples To Long The Main Tidsdale Sandstone was encountered fairly close to the prognosed depth at 368 11mi T O Intermediate casing was set at 512m MD or 381 05m TYO The horizontal section of the well extended for 525m and reached a maximum depth of 1037m MO The well bore stayed in a fairly narrow window 380 2 to 363 8m TYO for most of the well The well bore dropped significantly when we were Unable to steer orent at a depth 960m MD when we were at an elevation of 383 8m TYD and dropped down to a masimum of 385 74m TYD at 1037m MO The upper
30. a 1 open blank SENN Nozzle Size lea Fi Make STC Humber of Mozzles i fz 7 Type M416 Total Flow Area mr 111 4 Size 222 Rotating Hours Ee Serial M34256 Average Drill Rate B43 Depth In hoan o Display Depth In Eoo In Align fight Depth Out W500 Display Depth Out an Out Align Tight ad Drilled 120 00 Total Rotating Hours 35 0 Adding a Bit Record Bit Records Tab 1 Click on Bit Record under the Reports menu selection Hew 2 Click on the button or press ALT N Note In the event of a plugback or redirected well the Seq field can be used to override the Bit order normally dictated by the values in the Depth Out field so that the Bits can be kept in the proper sequence or order 3 Enter any appropriate information into the empty fields Note Please leave the Rotating Hours field blank or empty if you wish to indicate a zero 0 value for Rotating Hours Otherwise you will receive an Error in formula error message in the Well End Report window when you attempt to printout the Bit Record Summary reports 4 Select an alignment for the Bit In and Bit Out data to be shown on the Bit Record layer The default alignment is to the right of the Bit Record layer However you can select a left right center or blank alignment If you select a blank alignment the Bit Record will not be displayed but it will still be printed out in the Well End Report window 5 The Bit In da
31. access the Dip Meter Import window click on Import Export under File to activate the pop out menu and then select Import Dip Meter or click on the Import Dip Meter data button on the Import Toolbar This will activate the open Dip Meter Data file window as shown below Open Dip Meter Data File Look in CNRL Demo ex EB B Jpeg Images Core in Boxes wii core labs mapping file cdm E survey For Vict C93PG_Images E 13 cnrl mapping cvm fe dip meter mapping dmm A CNRL las BL Norwest lab data csv E5 Core lab data csv EP Norwest lab data xls at Core lab data xls ATi norwest mapping file cdm lt gt File name dip meter data tst Files of type All Files v Cancel 2 Select the file from the folder or drive with the corresponding navigational tools provided and either double Open click on the file name or click once and click on the button This will activate the Set delimiter window as shown below N B The one on the left the delimiter is set correctly the one on the right the delimiter is set incorrectly Set Delimiter Set Delimiter C Comma C TAB Space Comma TAB Space Example Example 6 57 lt column break gt 9 4 lt column break gt 234 1 lt column break gt 50 lt column break gt 3 4 lt colt 6 57 9 4 234 1 50 3 4 193 8 COMPUTED lt t Correct 3 Not Correct Highlight the correct corresponding button beside Comma TAB or Space delimiter if shown correctly
32. and 3 to delete more Rock Accessory intervals from the Rock accessories track layer 5 Press the Esc key on the keyboard to exit from the Rock Accessory Symbol window Deleting Multiple Intervals 1 Double click on the Rock Accessory track layer to activate the Rock Accessory Builder window Rock Accessory Builder Thinbed E anhy prim pebbles anhydrite primar pebbles Component Matrix Cement Hi Abundance Decasional bi if Dbl Click Interval Entry 110 62 111 22 Top Base W Snap To Nearest Edit Favorites Toolbox Save 2 Press and Hold the SHIFT Key and then click and drag an area anywhere within the intervals you wish to delete 3 Release the mouse button to activate a Confirm Multiple Delete message Addendum Manual Version 9 0 page 133 POWER SSUITE Addendum User Manual Version 9 0 Confirm Multiple Delete Delete these Symbols i Y 4 Click on button and the Rock Accessory interval encompassed with your drag will be deleted accordingly 5 Press the Esc key on the keyboard to exit from the Trace Fossils Builder window Note Every type of layer in Power Log Power Core and Power Curve has a Data Type classification The default E3 settings for the Rock accessories layer are shown below To access this window click on the ES Layer Configuration button on the Toolbar when the Rock Accessories layer is active Active Layer Configuration Rock Accessories Layer
33. at Display scales on non active layers Display Full Logarithmic Scale Display Depth Asuie Grid Display Datavaxis Grid Inf In Display Backup scales Cancel Help Addendum Manual Version 9 0 page 130 POWERXSUITE Addendum User Manual Version 9 0 Rock Accessories Layer This layer allows you to add or delete rock accessories in the Power Core application There are two types of rock accessories layers There is a Bed Restricted BR and a Non Bed Restricted NBR layer types The bed restricted BR layer type is like a typical rock property layer sorting rounding grain size where you have to have a rock type in order to enter a rock accessory The rock accessories are also restricted to the bed you are drawing in Also when the bed is resized or deleted the rock accessories may be also resized or deleted if the rock accessories interval coincides with the beds resized or deleted interval The non bed restricted NBR layer type is not associated with any rock type or bed and can be entered anywhere the user wishes and will not be affected by the resizing or deleting of a bed Adding a Rock Accessory Note All bed restricted description categories such as Rock Accessories BR are associated with a Rock Type and must have a Rock Type in order to be saved to the database Therefore you cannot add a sedimentary structure until there is a rock unit or bed interval added to the Interpreted Lithology L
34. be located under the Edit Menu Selection Formation i Formation i Button Click on the button to display the list of Formations and Sample Tops that have been entered to date Double click on the Formation or highlight the Formation and click on the Select button to edit or view the Formation Addendum Manual Version 9 0 page 52 POWERXSUITE Addendum User Manual Version 9 0 Group Formation and Member short and long Type in the short and long name for the Group Formation and Member names Only the Formation long name is a mandatory field The short name will be added to the formation short name layer display on the log coupled with the short period name and the measured depth 1 T mi F os 3 ag os 5s o amp a wy or c 76 Jaqua udag se zig laf zie lz e m ir T Lambert E vaporite Key 2 TYD 295 4 5 3 SSL 270 50 Formation Tops Long Name Short Name Expanded Layer Ages Layer Sequence Number The Seq field can be used to override the order that the formations are printed out in the well end and morning reports Era Series Period and Stage Use the drop box methods to access the various Eras on the lists Note that the Period chosen will affect the list in the Stage drop box Age You may enter the estimated geological age of this formation in this field Thickness You may enter the thickness of this formation into this field or the user
35. description will be displayed Otherwise the intervals are set to zero 0 and the cursor is placed in the Interval From depth field Type the Interval From and Interval To depth values into their respective fields and press the Tab key on the keyboard to move to the next field Type in the Rock Type and press the Tab key Type the Short abbreviated Description into the Short Description field Note that any abbreviations that are misspelled or are not found in the Geology Dictionary will not be expanded When you type your abbreviations in ALL CAPS your long description will be ALL CAPS as well Similarly if you use all lower case letters in your abbreviations your expanded description will be all lower case You are also able to use capital letters to begin your abbreviations and leave the remaining letters in lower case This will produce lower case words that are capitalized in the long description 3 A Click on the Savel button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Note You also have the option of typing out the non abbreviated form of the Core Descriptions into the Long Description field and then clicking on the De nieni Dike button to display the abbreviated form of the Core Descriptions in the Short Description field Repeat Steps 3 to 6 Note IT IS IMPORTANT TO SAVE EVERY RECORD You must click on the Savel button or press ALT
36. for the Sedimentary Structures layer are shown below To access this window click on the Layer Configuration button on the Toolbar when the Sedimentary Structures layer is active Active Layer Configuration SEDIMENTARY STRUCTURES Layer Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions Savel Undo Data Type Name Sedimentary Structure uw Display Layer Name or Curve Scale on Track Foreground Color black hai Show L Track Sea E eae Depth Offset Display Wertical Orientation Layer Name Display Scale Placements Eyer Start at Display Backup scales Display scales on non active layers Display Full Logarithmic Scale Display Depth Asis Grid Display Data 4sis Grid Cancel Help Addendum Manual Version 9 0 page 124 POWERXSUITE Addendum User Manual Version 9 0 Bioturbation Layer This layer allows you to add or delete Degrees or intensities of Bioturbation in the Power Core application There are two types of Bioturbation layers There is a Bed Restricted BR and a Non Bed Restricted NBR layer types The bed restricted BR layer type is like a typical rock property layer sorting rounding grain size where you have to have a rock type in order to enter a degree of Bioturbation The Degrees of Bioturbation are also restricted to the bed you are drawing in Also when the bed is resized or deleted the Degree of Biot
37. have added the ability to add your striplog descriptions to your Morning report We have added the ability to change the Bit Record Font style size and color to be editable by the user and can be used as defaults for subsequent logs We have added the ability to change the Directional Survey Font style size and color to be editable by the user and can be used as defaults for subsequent logs We have added the ability to change the Formation Tops and Ages Font style size and color to be editable by the user and can be used as defaults for subsequent logs We have added the ability to change the Track Header Font style size and color to be editable by the user and can be used as defaults for subsequent logs We have added the ability to change the Layer Header Font style size and color to be editable by the user and can be used as defaults for subsequent logs We have increased the functionality of the Interpretive Lithology Layer We have added the ability to double click a lithology or no data interval between two drawn beds We have also added the ability to Addendum Manual Version 9 0 page 2 POWERXSSUITE Addendum User Manual Version 9 0 draw multiple interbedded lithologies including grain sizes on your log without having to redo all the Original parameters We have added the ability to delete multiple Rock Accessories Sedimentary structures Trace Fossils Diagenesis and Fractures by Holding the CTRL Key and drawing a box a
38. instead of the middle of the interval The Format field indicates which format you wish to display the top on the log either short name 1 or long name 2 Format 1 indicates the Formation top with a line and its appropriate Depth above the line and a short form for Age and Formation below the line Format 2 displays the Member Formation in long form along with True Vertical Depth TVD and Sub Sea Depth SSL and is typically used in the Formation Long Name Layer Dip Meter Definitions Tab This tab in the layer configuration window allows the user to change the display of the Dip Meter Data on the Dip meter and hole dip layers An example is shown below Addendum Manual Version 9 0 page 33 POWER SUITE Addendum User Manual Version 9 0 Active Layer Configuration Bedding Dips Layer Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions Set Color for Dips Azimuth O 180 m Main color 180 360 Dip LineColor brown l V 3D Look l Quality by Size ee OK Cancel Help Set Color for Dips Azimuth selection allows the user to make a color differential between dips 0 180 MBL Maincoor from 0 180 and dip azimuths from 180 360 180 360 me Set Color for Dips Azimuth To change a color Click on the button and this will activate the Color Picker Click on a OF color or Use custom defined color picker and then click on th
39. list or click in the builders drop down menu selections to access the list provided in them Either way once you have selected one it will be populated in the builder para re ls REE i Addendum Manual Version 9 0 page 121 POWERSSUITE Addendum User Manual Version 9 0 Sedimentary Structures gt Abundance gt None Delete Trace Occasional Edit Options gt Common Exit Abundant 5 Click and drag the mouse on the track layer over the desired interval Or If you just click your mouse on the track layer This will insert a subinterval of whatever was selected in step 3 and will be added to the layer track at the depth you clicked at The interval size is defaulted to the screen scale accuracy setting The sedimentary structure interval will be drawn accordingly 6 Double Click within an existing rock type interval in the Sedimentary Structure layer with the W Dhl Click Interval Enty activated and the entire interval will be filled in with the attributes that have been entered into the Sedimentary Structures window 7 Click and drag the mouse on the track layer close to an existing sedimentary structure either above or below in the same column with the W Snap To Nearest activated and there will be no spaces between the sedimentary structures Remember you have to be within 10 times of the mouse pointer or screen accuracy from the previous symbol to have the snap to take effect Note Regardless of the thickne
40. of Sample Descriptions and then double click on the interval that you wish to edit 3 Once the selected interval is displayed in the Sample Description window make any changes you feel 5 are necessary Click on the au button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Deleting a Sample Description ae First P Y ext Last 1 Use the Database Navigational Tools Fist Prev Newt Last to navigate through the records See the Database Navigational Tools section later in this User Manual for more information 2 Or Click on the Interval button to view a list of Sample Descriptions and then double click on the interval that you wish to delete D el 3 Click on the Delete button Addendum Manual Version 9 0 page 40 POWERXSUITE Addendum User Manual Version 9 0 4 The user will be prompted with a confirmation Do you really want to delete Click on the Yes button Undo The button will restore the window to the settings of the last saved record You can Tab between fields or press Shift Tab to move backwards between fields Field Restriction Table Intervals From amp To Mandatory Rock Type Mandatory Percentage Optional Short Description 65 535 Optional For other ways on how to transfer Sample Descriptions to a log see the Sample Core Description Transfer section in Chapter Five of the User Manual Note When you ad
41. on your log 1 Double click on the Porosity Grade layer to expand the Porosity track and to activate the Porosity Builder window 2 Select the pattern ater Crosshatch at 45 degrees Patten Color I from the Fill pattern list drop box 3 Select the Foreground Color Line Color from the Pattern Color MEIN selector d button 4 You may also have to change the background color of the Porosity Grade as well With the Porosity Grade layer click on the Layer configuration selection under the Edit pull down menu This will activate the Layer configuration tab dialogue window 5 Click on the 59r0und Color black drop box and select in this case a background color for your porosity grade layer The illustration above is a white background 6 Click on the as button Addendum Manual Version 9 0 page 93 POWER SUITE Addendum User Manual Version 9 0 Adding an Entire Interval Note All description categories such as Porosity Grades are associated with a Rock Type and must have a Rock Type in order to be saved to the database Therefore you cannot add an entire interval or sub interval of Porosity Grades until there is a rock unit or bed interval added to the Interpreted Lithology Layer for that interval 7 Double click on the Porosity Grade layer to expand the Porosity track and to activate the Porosity Builder window shown below Porosity Builder Gave Del Grade Entire Interval 1452 50 to 1460 0
42. the Layer heading will be displayed vertically in the track header If unchecked it will be displayed horizontally Display Backup scales this box is checked default any time a curve goes off scale or wraps the curve is hatched and the backup scale is viewed on the Layer Display scales on non active layers If this box is checked default it will display the scales including scale changes for a curve on the log will be shown regardless of which layer is active at the time Display Full Logarithmic Scale if this check box is activated it will display all the major cycles will be labeled If this is unchecked or deactivated only the two end borders of the scale will be activated I Display DepthAxis Grid If this box is checked default it will display the Depth Axis Grid X axis Horizontal grid lines in Power Log and Vertical grid lines in Power Curve as defined in the Log Configuration Layer Scale Tab Dialogue window W Display DataAxis Grid If this box is checked default it will display the Data Axis Grid Y axis Vertical grid lines in Power Log and Horizontal grid lines in Power Curve as defined in the Log Configuration Layer Scale Tab Dialogue window Data Axis Grid Style o we UWI Button Addendum Manual Version 9 0 page 25 POWER SUITE Addendum User Manual Version 9 0 Normally the UWI field within the Layer Configuration window should be blank because the layer normally exhibits data from the Active o
43. the list drop box Click on the po ow button after you have changed your selection How to Change the Grain Size Display from a Solid Color to a Hatching Pattern on your log This can only be represented with the Lithology Profile deactivated Lithology Profile in the System Options Display Tab dialogue window This will also change all the grain size and matrix layers on all logs 1 Click on System Options selection under the Options menu selection This will activate the System Options tab dialogue window 2 Click on the Display Tab Grain Size Fill Pattern v Horizontal hatch A Vertical hatch Downward hatch left to right at 45 degrees 3 Then select the grain size pattern PESTLE from the Fill pattern list drop box 4 Select the Foreground Color Line Color from the Pattern Color MEN selector button OF 5 Click on the button after you have changed your selection 6 You may also have to change the background color of the Grain size as well To do this click on the Grain Size layer Addendum Manual Version 9 0 page 84 POWERXSUITE Addendum User Manual Version 9 0 7 Click on the Layer configuration selection under the Edit pull down menu This will activate the Layer configuration tab dialogue window 8 Click on the egund Color black EJ drop box and select in this case a background color for your grain size 9 Click on the button Adding an Entire Interval Note All description categor
44. to 3 0 3 0 to 3 5 3 5 to 4 0 4 0 to 4 5 4 5 to 5 0 5 0 to 5 5 5 5 to 6 0 6 0 to 6 5 6 5 to 7 0 7 0 to 7 5 7 5 to 8 0 8 0 to 8 5 8 5 to 9 0 9 0 to 9 5 9 5 to 10 0 Addendum Manual Version 9 0 page 87 POWERSSUITE Addendum User Manual Version 9 0 Grain Size Matrix Layer This layer allows the user to log two grain sizes bimodal grain size at the same depth The layer gives the user the ability to add delete or change Entire Intervals and or Sub intervals of Grain Sizes for any given Interpreted Lithology Rock Interval Definitions of an Entire Interval and a Sub interval will help you to visualize how the system handles data on an interval basis Entire Interval An entire interval is one that is pertinent to an entire rock unit or bed An entire interval cannot be added until a bed exists Sub interval A sub interval can be of any thickness less than the entire rock unit or bed and can rest within an entire interval or can stand alone as a sub interval without being part of an entire interval You can have as many sub intervals as you wish If you enter a sub interval equal to the rock unit or bed the sub interval will become an entire interval Snap to Closest Lithology W Snap to closest thology When checked allows the user to find the top or bottom of an interval easily with the mouse pointer as you have to be within 10 times the mouse pointer or screen accuracy of the interval to catc
45. vine Column 5 nd Hydro Pre Before Column 5 ving Column 6 n Hydro Pre After Column 6 ine Column EN Formation Frs Column MBE Column BE E ql Fluid Weight Column RE Column 9 Column 9 vine Column 10 ili Column 10 vi ae Column 11 i Column 11 aF Column 12 Column 12 Edit Data File Reload Data File Sample portion of file md tyd sl hp before hp after fp ety temp mob formation comment 201 201 799 2500 77 2002 44 1803 32 0 995 67 1 204102687 Clearwater all ok 216 6 216 1 703 9 2510 35 2012 11 1813 99 0 995 69 2 700 574173 clearwater all ok 232 2 231 2 768 8 2519 93 2021 78 1824 66 0 995 13 612 4146669 clearwater all ok 247 8 246 3 faa 7 2529 51 2031 45 1835 33 0 995 fad 925 5591136 clearwater all ok 263 4 261 4 738 6 2539 09 2041 12 1846 0 995 75 5 396 1702937 clearwater all ok 279 276 5 23 5 2546 67 2050 79 1856 67 0 995 FB 64 57082239 clearwater all ok 294 6 291 6 708 4 2558 25 2060 46 1867 34 0 995 ra 163 2160302 Clearwater all ok wt Import 6 Click on the impot button After the data has been imported you will be prompted with a system message Database Message x o l Imported Successfully 7 Acknowledge the Import message Click on the button and then click on the to exit or wit click on the button to close the Window Addendum Manual Version 9 0 page 16 POWERXSUITE Addendum User Manual Version 9 0 Print Log File Pull down menu Prints all or part of your log well alo
46. where an Annotation can be found with the list active scroll through the list and click on l Move T S the annotation you wan to move to Click on the PENS button This will move you to see the annotation on the log 6 To Copy an Annotation with the list active scroll through the list and click on the annotation you wan to Copy to Clip move to Click on the button 7 Define an area or box outline by clicking and dragging the left mouse button from the upper left corner to the lower right corner of the desired area to form a rectangular shape and then releasing the left mouse button on an Annotation layer to activate the RTF Font and RIF Lines and Boxes 7 Click once more in the drawn area and you will get a flashing cursor 8 Right Click anywhere within the Annotation field that is highlighted to activate the pop up menu Cut Paste Delete Apply Formatting F 8 Click on the Copy Selection and you will see your annotation refreshed from what was copied to the clipboard in step 6 Globally Change the Annotation Font Properties 1 Make a Lithology Description or Annotation layer active by clicking on the track that has an Annotation layer on it and then selecting that annotation layer you want to work with from the Layer Section list on the Selection Toolbar 2 Right Click anywhere within the track borders not inside an active annotation to activate the pop out menu shown below Addendum Manual Version 9 0 pag
47. you feel are necessary Click on the Seite button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Deleting a Formation Top Formation 1 Click on the button to view a list of Formations to date and then double click on the record that Del you wish to delete Once the selected record is displayed in the Formation window click on the Delete button eae First P Y Next Last 2 Or use the Database Navigational Tools da ees Ea to navigate through the records See the Database Navigational Tools section later in this User Manual for more information Select the record you wish Del to delete and it will be displayed in the Formation window Then click on the Delete button Ves 3 The user will be prompted with a confirmation Do you really want to delete Click on the button Unido The button will restore the window to the settings of the last saved record You can Tab between fields or press Shift Tab to move backwards between fields Well Formation Window Breakdown of Fields Well Formation Save Undo New Del Next Last KB Ground Casing Flange Alignment Shot Long 2a 4 9 2 1 1 2 1 08 center pee Boundary Type cont conformable maion e Fte Member mts Main Tidsdale Sand Segtt 0 Long Name Display Depth Subsea 353 98 Era Series Tops Mesozoic Lower wy MD TYD Period Stage Prognosis 370 K Cr
48. 0 Sub Interval x W Dbl Click Interval W Snap To W Soft Edges Patter Pattern Color E Bi Crosshatch at 45 degrees kd 8 Then using the left mouse button click and drag the mouse pointer from a specific Measured Depth and Porosity as indicated within the mouse pointer display box to another Measured Depth e g 1200 00 3 to 1203 00 on the Porosity track 9 Release the mouse button and the entire Porosity interval will be drawn in purple accordingly Repeat Steps 2 and 3 to add more Porosity Or Use the Double Click data entry method 1 With the WM Dbl Click Interval selected in the builder simply double click in the interval the porosity grade you wish to enter and it will fill in the entire interval with purple with your selection Note If you have already added a sub interval and are now adding an entire interval the sub interval will now take priority Press the Esc key on the keyboard to exit from the Porosity Builder window Deleting an Entire Interval 1 Double click on the Porosity Grade layer to expand the Porosity track and to activate the Porosity Builder window 2 On the Porosity layer right click anywhere within the purple interval that you wish to delete to activate the pop up menu shown below Delete Sub Delete Entire w Soft Edge Hard Edge Edit Options F Exit 3 Click on Delete Entire and the entire Porosity Grade interval will be deleted accordingl
49. 3 Click on the List Selection This will activate a List box shown below Annotation List 80 92 A 144 98 145m Ss It gy It brn It gy brn f gr grdg slt w srt sbrdd gtz tr carb flks arg t 160 91 165m Sh aa 170 62 170m Ss wh It gy f gred modly w srt sbrdd gtz tr dk mnrls tr fld com dolic cr 570 570 575m Ss It gy It gy brn f c gr modly w srt sbrdd sbang gtz com micas flk 600 42 610 615m Ss It gy It gy brn m ve gr occly f gr modly w srt sbrdd sbang gt 609 99 615 620m Ss It gy It gy brn m ve gr occly f gr modly w srt sbrdd sbang gt l gr modly srt sbrdd sbang gtz com micas flks 625 630m Ss It gy It gy brn f I 630 635m Ss It gy It gy brn f ve gr modly srt sbrdd sbang gtz com micas flks 635 640m Ss It gy It gy brn f c gr modly w srt sbrdd sbang gtz com micas flk 640 645m Ss It gy It gy brn f m gr occly c gr w srt sbrdd sbang gtz com mic 630m Ss t gy t gy brn f ve gr modly srt sbrdd shang gtz com micas flks occ fld tr chlor predly disaggd ptch cly mtx occ trs dolic cmt pyric ip g est intgran por 16 20 tr ptch brn o stng bri yel flor p stmg bri yel cut flor Delete Move To Copy to 4 To delete an Annotation with the list active scroll through the list and click on the annotation you wan to Delet delete Click on the Delte button This will delete the annotation 5 To Move to a depth
50. 4 Click on the button This will activate a system message indicating the new file name System Message File uw_ 12 16 81 11Mvw las will be created if it exists it will be overwritten Continue Yes No 5 Click on the button This will activate file Success message window showing you your path and new file name Note The application basically renames the file with a prefix un_ and put the file in the same folder as it was found File Success i Unwrapped File Created C DEMO LAS Wrapped Files uw_12 16 81 11Mw las 6 Click on the Button and the LAS Unwrap window will also reflect the new file creation LAS Unwrap Utility Choose File 12 16 81 11Mw las uv_12 16 81 11Mw las Unwrap File 7 Ifyou are finished then click on the button This will close the LAS Unwrap Utility Addendum Manual Version 9 0 page 72 POWERSSUITE Addendum User Manual Version 9 0 System Options Options pull down menu Item The user can manage Power Log Power Core and Power Curve system settings with this tab dialogue window Once you have made your changes Click on the button General Tab System Options General Fonts Display Favorites Home Directory C PowerSuite_ Vo W Show All Wells at Startup Version Data Buffer Date Format Compatibility Lookahead MMM DD ee iivs 50 a Home Directory This is the directory on your hard drive where Power Log Power Core and Power Curve is being exe
51. 43 Deleting a Core Description 43 Bit Record 45 Addendum Manual Version 9 0 page 4 POWERXSSUITE Addendum User Manual Version 9 0 Adding a Bit Record 45 Bit Records Tab 45 Pump Data Tab 46 Drilling Parameters Tab 47 Bit Grading Tab 47 Editing a Bit Record 48 Deleting a Bit Record 48 Aligning All Bit Records 48 Formation 51 Adding a Formation Top 51 Editing a Formation Top 51 Deleting a Formation Top 52 Morning Report 56 Adding a Morning Report 56 Editing a Morning Report 56 Deleting a Morning Report 56 Lithology Summary 57 Adding a Lithology Summary 58 Editing a Lithology Summary 58 Deleting a Lithology Summary 58 Transferring a Sample Description 59 Transferring Lithology Descriptions from the Striplog 60 Gas Summary 61 Adding a Gas Summary 62 Editing a Gas Summary 62 Deleting a Gas Summary 62 MDT Report Window Reports pull down menu item 63 Adding a MDT Run 63 Editing a MDT Run 63 Deleting a MDT Run 63 MDT Data Window 64 Adding an MDT record manually 64 Editing MDT Data 65 Deleting MDT Data 65 Sample Core Description Transfer Options pull down menu Item 67 Transferring one Sample Description 68 Transferring Multiple Sample Descriptions 68 Transferring Core Descriptions 69 Transferring a Single Core Description 69 Transferring Multiple Core Descriptions 70 How to unwrap a wrapped LAS file format 72 System Options Options pull down menu Item 73 How to Set your Fonts 75 How to Change the Rock Favorite
52. Addendum Manual Version 9 0 page 49 POWER SSUITE Addendum User Manual Version 9 0 Note When you add any layer to a log it is always associated with a Data Type Every Data Type in Power Log Core amp Curve has a default setting The default settings for a Bit Record layer are shown below To access this window click on the Layer Configuration button on the Toolbar when the layer is active Active Layer Configuration Bit Record Layer Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions Save Undo Data Type Name Bit Record uw Display Layer Name or Curve Scale on Track Foreground Color black kai Show L Track eae ra Depth Offset Display Vertical Orientation Layer Hame Display Scale Placements Eyer Start at Display Backup scales Display scales on non active layers Display Full Logarithmic Scale Display Depth Asis Grid Display Data Ansis Grid Cancel Help Addendum Manual Version 9 0 page 50 POWERSSUITE Addendum User Manual Version 9 0 Formation Enter the details of any Formation into this window This information is then printed out in 3 different reports and can be place on the striplog in 4 different formats The reports this information generates would be a Formation Top Summary Formation Evaluation Report and the Sample Description report with Tops and the Morning Report Formation report
53. Configuration window tab dialogue window 2 Click on the Layer Scales tab shown below Active Layer Configuration Carbonate Texture Layer Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions Porosity Grade Seale Fercent Laver Scale Dip Meter Scale Grain Size Scale Carbonate Texture Scale Depth Axis Grid Left 10 Right jo Verbal Sethngs 2 Style Full Grain Size Scales D ata Axis Grid aborte Texture Scales boundstone o ay Unita Dip Meter Quality Scale Range Linear Cycles From l tel Maor Minor Increment E E Log Cycles 1 0 Cancel Help Note Every type of layer in Power Log Power Core and Power Curve has a Data Type classification so the system knows what default settings to use when adding the layer to the log The Layer Configuration window shows the default settings for the Carbonate Texture layer 3 Select the left and right carbonate texture scales from the Carbonate Texture Scale drop boxes 4 Click on the button and select i Layer Configuration window il from the System Message window to exit the Addendum Manual Version 9 0 page 120 POWERXSUITE Addendum User Manual Version 9 0 Sedimentary Structures Layer This layer allows you to add or delete sedimentary structures in the Power Core application There are two types of sedimentary structure layers There is a Bed Restricted BR and a N
54. Cycles entered into this field but there is no guarantee as to the correctness of the curve scale represented in the Curve Header Scale The frequency of the scale is determined in the Display options tab Remember that for Logarithmic scales the left and right values must be values according to the Log Based 10 0 1 1 0 10 0 100 0 etc Therefore if your left and right values are 0 001 and 100 respectively then the Log Cycle field should have a value of 5 cycles Moreover if the left and right values are 1 0 and 1000 respectively then the Log Cycle field should have a value of 3 cycles Grain Size LN Natural Log cycles are best determined utilizing the grain size Verbal setting selector Otherwise to determine the left right values and grid cycle you should refer to the grain chart that is produced on the log legend This will help you find out the upper coarse and lower fine limits of your Grain Sizes For example If the lower limit is Coarse Silt at 0 03125mm and the upper limit is Very Coarse Sand at 2mm then you should have 6 Log Cycles for the grid on a natural log scale and also have a LN as a Data Axis Grid Type Data Group ID s Tab This tab in the layer configuration window allows the user to change the specific data groups available for each Layer type An example is shown below Addendum Manual Version 9 0 page 30 POWERXSUITE Addendum User Manual Version 9 0 Active Layer Configuration Drill Rate Layer
55. Det Lith well Status Potential Lower Ai Sephton Oil well Abstract Addendum Manual Version 9 0 page 20 POWERXSUITE Addendum User Manual Version 9 0 Core Sample Header Edit pull down menu item The Core Sample Header window allows you to edit the information being displayed when the core or sample log header is printed It also allows you to delete the core log header Well Name testing with system logs Location Ground Collar 123 23 m UWI testing with system KB 2345 56 m UTM East 2345678 9 Hole ID 3939kfk48 Core Quality Good UTM North 1234567 88 Cored Interval 4 m to 1234 53 m Logged by bob Sephton Slabbed Yes Depth Correction Corrected 1 4 m Date Jul 5 2006 Remark This is a test to be done with the latest data from the well prospecting with the untimate to make this a better log Location 16 12 3423 WEM K5 296 7 m Sample Guaity Go Logged by EW Oste Jui 11 2008 ey 052 DO Osc 1206 sng light giny brown medum to coarse gan cocamonmlly very coer gar mocderaiaty weil Y Paley disaggiegaled Good estimated irtergranulr prosily 16 Me t How to Edit a Core Sample Header 1 Click on the Core Sample Header selection located under the Edit pull down menu Core Sample Header Savel Del Interval Date Logged by Top Depth Base Depth Jul 11 2006 Jennifer Wright Depth Corrected Remark Quality Remark Lost Core 9 9m IV Slabbed Good Remarks Lab Recovery 99 03
56. Dip Meter Definitions Save Undo Data Type Name Multi Array Density Data Layer uw Display Layer Name or Curve Scale on Track Foreground Color black z Show L Track uae re Depth Offset Display Vertical Onentation Layer Mame Display Scale Placements Eyer Start at Display Backup scales Display scales on non active layers Display Full Logarithmic Scale Display Depth Asis Grid Display Data Axis Grid Cancel Help Addendum Manual Version 9 0 page 140
57. Double click on the Trace Fossils track layer to activate the Trace Fossils Builder window Trace Fossil Selection Ar Ar Arenicolites bed Abundance Occasional v Top 110 24 Bas 110 76 V Dbl Click Interval Entry V Snap To Nearest Edit Favorites Toolbox Save 2 Press and Hold the SHIFT Key and then click and drag an area anywhere within the intervals you wish to delete 3 Release the mouse button to activate a Confirm Multiple Delete message Confirm Multiple Delete Delete these Symbols 1 a 4 Click on button and the Trace Fossils interval encompassed with your drag will be deleted accordingly 5 Press the Esc key on the keyboard to exit from the Trace Fossils Builder window Note Every type of layer in Power Log Power Core and Power Curve has a Data Type classification The default a settings for the Trace Fossils layer are shown below To access this window click on the Layer Configuration button on the Toolbar when the Trace Fossils layer is active Active Layer Configuration Trace Fossils Layer Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions Save Undo Data Type Hene Trace Fossils Ul W Display Layer Name or Curve Scale on Track Foreground Color black r Show L Track pa agg cheat Depth Offset Display Vertical Onentation Layer Name i Display Scale Placements Every Stark
58. Drag with the Left Mouse button Drag the columns of the data file over to the corresponding field Data Column lt Column 1 x Column 2 i Column 2 x Column 3 ip Azi Column 3 By Column 4 i Column 4 x Column 5 Re Hole Deviation Degrees Column 5 hy Column 6 Es Hole Azimuth Column 6 Re Column 7 Column 7 Kisii K K Edit Data File Reload Data File Sample portion of file DEPTH H Import Click on the _Impot button After the data has been imported you will be prompted with a system message Database Message Ea L imported Successfully Acknowledge the Import message Click on the button and then click on the i to exit or Exit click on the button to close the Window Addendum Manual Version 9 0 page 11 POWER SUITE Addendum User Manual Version 9 0 Import Modular Dynamic Tester MDT Data This method will allow the user to import ASCII space comma or tab delimited file formats into our database We cannot import EXCEL or any other type of spreadsheet format If the data comes that way you must resave it in another format before attempting to import the data Importing MDT Data 1 To access the MDT Data Import window click on Import Export under File to activate the pop out menu and then select Import MDT or click on the 4 Import Dip Meter data button on the Import Toolbar This will activate the open MDT Data file window as shown below Open MDT Data File Look i
59. Entire Intervals and or Sub intervals of Carbonate Textures for any given Interpreted Lithology Rock Interval Definitions of an Entire Interval and a Sub interval will help you to visualize how the system handles data on an interval basis Entire Interval An entire interval is one that is pertinent to an entire rock unit or bed An entire interval cannot be added until a bed exists Sub interval A sub interval can be of any thickness less than the entire rock unit or bed and can rest within an entire interval or can stand alone as a sub interval without being part of an entire interval You can have as many sub intervals as you wish If you enter a sub interval equal to the rock unit or bed the sub interval will become an entire interval Snap to Closest Lithology W Snap to closest thology When checked allows the user to find the top or bottom of an interval easily with the mouse pointer as you have to be within 10 times the mouse pointer or screen accuracy of the interval to catch the top or bottom with a drag Double Click Interval Entry W Dbl Click Interval Entry When checked will allow the user to enter a Carbonate Texture over an entire interval with a double click on the left mouse button Soft Edges Ww Soft Edges When checked will round off the Carbonate Textures and will present the Carbonate Texture edges with sine wave lines instead of strain lines DD JKIA DUOI Em F Co cf a a T 4 ui Carbonate Textur
60. Grain Size or Carbonate Texture from and to from their respective drop boxes if you wish Fill in the Percentage of Interbeds at the top of the interval and the base of the interval by typing in their respective percentages Select a bedding thickness from the Bedding Thickness drop box Select if the interbeds are inclined or not from the check box Click on the Sme button The user can now go back to the Rock type builder by clicking on the Rock Type button Also the user can go to the accessory builder by clicking on the Aue button Or the user can exit the builder altogether by clicking on the button 10 Press the Esc key on the keyboard to exit from the Rock Type Builder window How to Draw with an already drawn Interbedded Interval 1 AE cae he Double click anywhere within the Interpreted Lithology track to activate the Rock Type Builder window as well as your Favorites List Toolbox Click on an already drawn Interbedded Interval Click and drag up or down within a specific track to define a new interbedded lithology interval Release the mouse button and the interval will be drawn accordingly If you wish to change some of the attributes Right Click on the drawn lithology and select Interbedding from the pop out menu or Click on the lithology and Click on the _Interbeds button in the Rock Type Builder Addendum Manual Version 9 0 page 99 POWER SUITE Addendum User Manual Version 9 0 Deleting the Interbed
61. It gy brn m vc gr modiy w srt sbang sbrdd qtz comly mi TED 765m Ss lt gy lIt qush brn t c or modiy w art shang sbrdd gtz com mic 65 70m Se It gy lt qush brn a a w srt shang sbrdd gtz com mic PPO 775m Ss It gy It qysh brn m vo gr modly w srt shang sbrdd gtz com m lt li gt Left Click to select a single annotation Select All Hold the CTRL Rey down to select multiple annotations Ok Hold the SHIFT Rey down to select a range of annotations once Addendum Manual Version 9 0 page 60 POWERXSUITE Addendum User Manual Version 9 0 4 To transfer a single annotation Click on an annotation to highlight the annotation in this window and then click OF oe ek on the button This will place the annotation in the Lithology Summary Window Or to transfer multiple annotation Click on a annotation in this window then hold down the CTRL Key and click on subsequent annotations to highlight them Then click on the button This will place all the annotation in the Lithology Summary Window 5 To Transfer a range of annotation Click on a annotation in this window then hold down the SHIFT Key and click on the last annotation to highlight the entire range You can also hold down the CTRL Key and click on EN 0K a subsequent annotations to highlight them Then click on the button This will place all the highlighted annotations in the Lithology Summary Window Litholopgy Summary on Mar 11
62. Manual Version 9 0 Ves 3 The user will be prompted with a confirmation Do you really want to delete Click on the ots button Unda The button will restore the window to the settings of the last saved record You can Tab between fields or press Shift Tab to move backwards between fields Field Restriction Table Po 40000 Lithology Summary Litholoqies This is the window that appears when you click on the 2 button This information can be printed out in the Morning Report The Lithology Report is combined with the Morning Report to give you a Summary and Lithology Report Lithology Summary on Mar 11 2008 fx Save Undo New Del Next Last Annotations Sample Interval a00 to 1100 Descriptions Lithology Description To Long Desc Annotatl I The _ Annotations button gets you to the Transfer Annotations window Here the user can transfer single or multiple lithology descriptions or annotations from their striplog into their AM Lithology Summary report Sample The ee button gets you to the Transfer Sample Description window Here the user can transfer single or multiple sample descriptions into their AM Lithology Summary report The Tae button expands the abbreviated text you have typed in the Lithology Description field Addendum Manual Version 9 0 page 57 POWER SUITE Addendum User Manual Version 9 0 Adding a Lithology Summary Lithologies 1 Click on Morning Report under
63. Manual Version 9 0 page 36 POWERXSUITE Addendum User Manual Version 9 0 Import Toolbar View pull down menu item Turns the Import Toolbar on and off This toolbar is dock able and can be moved to different places on the screen We have added some more shortcuts to this toolbar Impor Export Import ASCH Data Fies Import Survey Data fey S a me tek lel g t Import Dipmeter Data Import Import Core l Import MOT Data LAS PlugData 465 Import Files Well Data Export Toolbar View pull down menu item Turns the Export Toolbar on and off This toolbar is dock able and can be moved to different places on the screen rt Log Well Dat Export ASCI Data ae al CHEL Format Export ASCI Data Slide Ruotate Data Export ASCI Data oyster Format oH f SLO i SUE y Export ASE DBL Data Format Export Las Export ASCII Data Curve Data Landmark Geolog Format RTF Font Toolbar View pull down menu item Turns the RTF Font Toolbar on and off This toolbar is dock able and can be moved to different places on the screen This is used with the New RTF Annotations used on the Log Bold talzised Font Type Style and Size Underline strikethrough RTF Font ToolBar X Text Right Font Background Color Font Color Tab Right Tab Lett Bullets Addendum Manual Version 9 0 page 37 POWER SUITE Addendum User Manual Version 9 0 RTF Line and Boxes Toolbar View pull down menu item Turns the R
64. TF Line and Boxes Toolbar on and off This toolbar is dock able and can be moved to different places on the screen This is used with the New RTF Annotations used on the Log RIF Box Centre RTF Box Lett RTF Box Right Display scale RTF Lines and Boxes All Scales Line Style Line Thickness Display Text Tail on End of Line Tail on Start of Line Display Line Arrow on End of Line Display Box Outline Arrow on Start of Line Sample Description Reports pull down menu item This report allows you to describe a Sample The long descriptions will be used in the Sample Description Report that is printed out in the Well End Report We have added an Ascending Check box so that user can either log up or down with respect to the depth intervals This window will now populate the Lithology layer if it is utilized on your log as well This Lithology Layer will be populated if a percentage is used as well as a Rock Type is selected in the Lithology Rock Type drop down box Note If the descriptions are then transferred to the Striplog and then edited on the striplog the descriptions entered in the Sample Description reports remain unchanged Sample Description Save Undo New Del First Prev Next Last Dictionary Auto Next Auto Inc V Ascending Interval Rock Type Heading W Remaining cs 415 s fatto 1B Dok oag Short Description EEE Dol Dolomite v ToLong Dese mbm occly dk brn erpsl
65. TITE Version 9 0 Addendum Manual Wellsight Edition h TRIVISION WY GEOSYSTEMS LTD The Intelligent Geological Software Solution Suite 314 602 11 Avenue S W Calgary Alberta T2R 1J8 Phone 403 777 9454 Fax 403 777 9455 Website www powerlogger com Email info powerlogger com POWER SUITE Addendum User Manual Version 9 0 Overview We have completely revamped the Annotations We now have a true Rich Text field that can be completely customized with respect to fonts font color background font color bullets Line size styles with heads and tails You are now able to copy previously done descriptions and paste them into a new position on the log We have added an MDT Layer and Report to show the location and test number for multiple a Modular Dynamic Test tool as well as a report to show the data We have added an MDT Import Utility window to import MDT data directly into our MDT Table fields and retain the mapping for subsequent imports We have added a Dip Meter and Hole Dip layers to represent the dips angle and inclination estimated from any of your common Imaging tools We have added a Dip Meter and Hole Dip Import Utility window to import Dip Meter data bedding fracturing etc MDT data directly into our MDT Table fields and retain the mapping for subsequent imports We have added a Casing Data layer to display the casing shoe with the casing size and landed depth information from the cas
66. Toolbar buttons Adding Annotations Lithology Descriptions Drawing a Line How to Draw a line in the Annotations Lithology Descriptions Editing Annotations Lithology Descriptions Resizing Annotations Lithology Descriptions Moving Annotations Lithology Descriptions Deleting Annotations Lithology Descriptions Using the List functionality to copy move to and delete annotations Globally Change the Annotation Font Properties Globally Change the Annotation Font Color Globally Change the Annotation Box Alignments Globally Change the Annotation Display Scale Globally Change the Box placements to fit in the Track width Carbonate Texture Layer Carbonate Texture Matrix Layer Sedimentary Structures Layer Bioturbation Layer Trace Fossils Layer Rock Accessories Layer Percent Layer Adding a Percent Track Layer Drawing Percents Deleting Percents Changing the Percent Scale Multi Array Data Layer How to Add a Multi Array Track Setting up the Layer using the Dialogue Window Addendum Manual Version 9 0 page 6 POWERXSUITE Addendum User Manual Version 9 0 Import Dip Meter Data This method will allow the user to import ASCII space comma or tab delimited file formats into our database We cannot import EXCEL or any other type of spreadsheet format If the data comes that way you must resave it in another format before attempting to import the data Importing Dip Meter Data 1 To
67. a Core Sample Header 21 Well Record Data portion of the Core Sample Header window 22 How to Delete a Core Sample Header 22 Layer Configuration Edit pull down menu item 23 How to Edit a Layer Configuration Window 24 Display Settings Tab 24 How to Display a different Wells data on a layer of an Existing Log from another UWI or well 26 Curve Definitions Tab 27 How to select a different Curve to display on a Curve layer 28 How to change the Curve Attributes Curve and Units Null Value and Remarks 28 Layer Scales Tab 29 Data Group ID s Tab 30 Annotation Group Button 31 Generic Category Button 31 MDT Run Number Button 31 Directional Survey Button 31 Graphics Button 32 Detailed Lithology Group Button 32 Dip Meter Group Button 32 How to select a different Group to display on a layer 32 Formation Age Display Tab 32 Dip Meter Definitions Tab 33 Delete Generic Groups 35 Generic Group Sorting Edit pull down menu item 35 How to sort a Generic Group List 35 Toolbar View pull down menu item 36 Import Toolbar View pull down menu item 37 Export Toolbar View pull down menu item 37 RTF Font Toolbar View pull down menu item 37 RTF Line and Boxes Toolbar View pull down menu item 38 Sample Description Reports pull down menu item 38 Adding a Sample Description 39 Editing a Sample Description 40 Deleting a Sample Description 40 Core Descriptions 42 Adding a Core Description 43 Editing a Core Description
68. al Version 9 0 page 12 POWERXSUITE Addendum User Manual Version 9 0 MDT Data Import MDT Run i Open File Open Map File Save Map File Clear All Mapping Click and Drag with the Lett Mouse button Drag the columns of the data file over to the corresponding held Data Column Mapped Column Column 7 Seq No 12 Column 2 BE Measured Depth OAE Column 3 AE TVD Depth OAE Column 4 SSL Depth Ome Column 5 ba Hydro Pre Before OR Column 6 ME Hydro Frs After Oe Columa Import ne Formation Frs CIRE Column 8 BE Eqvl Fluid Weight o Column 3 ag Temp C CORE Column 10 Mobility Oe Column 11 ba Oe Column 12 Edit Data File Reload Data File Sample portion of file gfw formation comment sal hp before hp after f temp mob 0 995 bi 204102887 Clearwater all ok p 799 2500 77 2002 44 1803 32 216 6 oad 2510 35 2012 11 1813 99 0 995 69 2 FOO 547173 clearwater all ok eae 768 8 2519 93 2021 78 1824 66 0 995 ria 612 4146669 clearwater all ok 247 6 Toa 2529 51 2031 45 1835 33 0 995 rad 925 5591136 clearwater all ok 263 4 738 6 2539 09 2041 12 1846 0 995 75 5 396 1 702937 Clearwater all ok aed 23 5 2546 67 2050 79 1856 67 0 995 76 64 5 F065 2259 Clearwater all ok 294 6 708 4 2558 25 2060 46 1867 34 0 995 rar 163 2160302 clearwater all ok Overview of the window The left hand side of the MDT Data Import window allows the user to view the different data columns represented in the file numbered in ascending
69. al ends If done correctly the mouse pointer will turn into a resize cursor l 3 Click and drag the mouse to the new desired top or bottom depth Release the mouse button and the interval will be resized Keypad Method 1 Click once on the Sedimentary Structure you want to resize to bring it into the builder and change the from or to depth and or abundance and click on the __ Save button Remember if it is a bed restricted layer that the top or bottom of the Lithology interval will take precedent Moving an Interval 1 Double click on the Sedimentary Structure track layer to activate the Sedimentary Structure Builder window 2 Move the mouse pointer over the interval to be moved Click and drag the interval to a new position The bed restricted interval will not be allowed to move outside the interval of the lithology it is associated with Addendum Manual Version 9 0 page 122 POWERXSUITE Addendum User Manual Version 9 0 Deleting a Single Interval 1 Double click on the Sedimentary Structure track layer to activate the Sedimentary Structure Builder window Sedimentary Structures Bedding Cross bedding Laminations Cross Laminations cppxlam current ripple cross lamination v Other Abundance jo ccasional V Dbl Click Interval Entry Edit Favorites V Snap To Nearest Toolbox Save Top Base Exit 2 Right click anywhere within the interval you wish to delete to activate the
70. amorphic M r a Mrle Marlstone calcareous r am m r Mild Marlstone dolomitic ealas paleosol Paleosol trett eee Phos Phosphate Sh blk Shale black Sh brn Shale Brown Sh dk gy Shale dark gray Set List Size 20 Clear All Cancel Clear All oe 2 Click on the Ceara button in the Rock Type Favorites list window to prepare it for the selection of 3 your Rock Favorites Select by clicking on or highlighting some of your more commonly used Rock Types from the Rock Type Favorites list window Click on the button to return to the System Options window Addendum Manual Version 9 0 page 79 POWER SUITE Addendum User Manual Version 9 0 5 Click on the Savel button in the System Options window when you are finished Aco Favorit Accessory Favorites The Ace Favorites button when activated allows the user to determine the number of favorites for their favorite Accessories and then displays them in a pop up menu or Tool Box generated by the activation of the Accessory Builder window in the Interpreted and Detailed Lithology tracks How to Change the Accessory Favorites Selection Acc Favorit 1 Click on the Acc Favorites button in the System Options window to activate the Accessory Favorites window shown below Accessory Favorites anhy prim clasts anhydrite primary clasts anhy prim nodules anhydrite primary nodules anhy prim pebbles anhydrite primary pebbles Component f7 agg grs ag
71. and it will fill in the entire interval with your selection 4 Ifyou wish to see a different type of sequence and the user has previously dragged the entire interval right click within the interval to be changed and select the Entire Interval Sequence selection and select one of the appropriate selections The grain size appearance will be redrawn to reflect the newly selected criteria Delete Sub Delete Entire Entire Interval Sequence Fining Upwards SubInterval Sequence Coarsening Upwards w Soft Edge Blocky Hard Edge Edit Options Exit 5 Repeat Steps 2 4 to add more Carbonate Textures 6 Press the Esc key on the keyboard to exit from the Carbonate Texture Builder window Note If you have already added a sub interval and are now adding an entire interval the sub interval will now take priority Deleting an Entire Interval 1 Double click on the Carbonate Texture layer to expand the Carbonate Texture track and to activate the Carbonate Texture Builder window 2 On the Carbonate Texture layer right click anywhere within the interval that you wish to delete to activate the pop up menu Addendum Manual Version 9 0 page 115 POWER SUITE Addendum User Manual Version 9 0 Delete Sub Delete Entire Entire Interval Sequence F SubInterval Sequence w Soft Edge Hard Edge Edit Options Exit 3 Click on Delete Entire and the Carbonate Texture will be deleted accordingly 4 Press the Esc key on t
72. ast Use the database navigational tools Fist Prev 2 Nex Last to navigate through the records Or Click on the button within the Sample Core Description Transfer window to activate the Sample Core Description List window Then double click on the desired description within the Sample Core Description List window in order to display it in the Sample Core Description Transfer window 7 OR Click on the button to enter query mode The Depth and Rock Type text fields will become red Type in either a depth value or rock type where you want to start a query from and click on the Start Query button This will refresh the window with all the records starting from the depth value or rock type that you have just entered Then use the database navigational tools to navigate through the records Once the description is displayed within the Sample Core Description Transfer window click once on a spot on the active Lithology Description layer on the Lithology Description track where you want the Sample Description to be placed Transferring Multiple Sample Descriptions 1 eam Li Click on Sample Core Description Transfer under the Options menu selection or click on the Sample Core Description Transfer button on the Toolbar to activate the Sample Core Description Transfer window which will then display the last description entered into the current well Sample Core Description Transfer Undo Fir
73. at you made to the Print Log window and then will default to those settings the next time you enter the Print Log window Undo Edit pull down menu item The Undo selection allows the user to undo any or all of the striplog manipulations with respect to the layer functionalities performed on the striplog This includes adding deleting resizing moving etc of any of the individual layers functionalities The undo comments changes with each function performed to indicate what undo action can be performed This now applies to all Annotations done on the log as well Redo Edit pull down menu item The Redo selection allows the user to redo any or all of the striplog manipulations with respect to the layer functionalities performed on the striplog This includes adding deleting resizing moving etc of any of the individual layers functionalities The redo comments changes with each function performed to indicate what redo action can be performed This now applies to all Annotations done on the log as well Addendum Manual Version 9 0 page 19 POWER SUITE Addendum User Manual Version 9 0 Well Window Edit pull down menu item We have added 4 new fields to this table including Intermediate Casing Coordinates Metes and Bounds as well as Longitude and latitude Save Undo New Del Fiat Pre a Storage Units Metri wl Original Units Metric Uwl ABC oitza Location 1225 45 12 WAM well Name ABC Oil Anywhere
74. ata Type Interpreted Lithology Mame nteroreted Lithology Dwl PO Display Layer Name or Curve Scale on Track Foreground Color black r Show L Track E ees Depth Offset Display Vertical Orientation Layer Hame Display Scale Placements Every Stark at Display Backup scales Display scales on non active layers Display Full Logarithmic Scale Display Depth Asis Grid Display Data Asis Grid Cancel Help Addendum Manual Version 9 0 page 105 POWER SUITE Addendum User Manual Version 9 0 Annotation Builder These toolbars allow you to add edit move or delete Annotations Lithology Descriptions in an Annotation or Lithology Description track Note There is an annotation layer available throughout the whole log that allows you to add edit and delete an annotation anywhere within the log Refer to the Log Layer section within chapter 2 Bold ltalizised Font Type Style and Size Underline Text Lett Text Centred Font Color Tab Right Tab Lett Bullets Overview of RTF Font Toolbar buttons F At the flashing cursor or with some text highlighted this button will activate a Font Dialogue window to change Font Type style size etc H At the flashing cursor or with some text highlighted this button will activate a Bold Font style f At the flashing cursor or with some text highlighted this button will activate an Italic Font style At the flashing cursor or with some te
75. atch left to right at 45 degrees from the Fill pattern list drop box 4 Select the Foreground Color Line Color from the Pattern Color MEN selector button OF 5 Click on the button after you have changed your selection 6 You may also have to change the background color of the Grain size as well To do this click on the Grain Size layer 7 Click on the Layer configuration selection under the Edit pull down menu This will activate the Layer configuration tab dialogue window 8 Click on the Poeground Color black drop box and select in this case a background color for your grain size 9 Click on the als button How to Change the Grain Size Scale Type Wentworth Canstrat or Amstrat Addendum Manual Version 9 0 page 88 POWERXSUITE Addendum User Manual Version 9 0 1 Click on System Options selection under the Options menu selection This will activate the System Options tab dialogue window 2 Click on the Display Tab Grain Size Scale Wentworth z ce Canstrat Wentworth from the list drop box Click on the button 3 Then select the corresponding after you have changed your selection Adding an Entire Interval Note All description categories such as Grain Size Matrix are associated with a Rock Type and must have a Rock Type in order to be saved to the database Therefore you cannot add an entire interval or sub interval of Grain Size Matrix until there is a rock unit or bed interval a
76. atural log Base 2 can only be used with the Grain T Size or Grain Size Matrix Layer If you choose Logarithmic or LN you must fill in the number of Log Cycles If you Logarithmic ao l i choose Linear you must fill in the Linear cycles or grid pattern you wish to use on this layer Units The Units field is used to display the units used in the layer header for the Grain Size Carbonate texture Porosity Grade Percent and Dip meter layers Linear Cycles Major Minor Increment Linear Cycle Fields Alters how the grid lines are displayed on a layer You can set the occurrence of major divisions lines on a layer and minor divisions 2 5 10 lines as well as the number of increments divisions lines on a particular layer In this case the layer will be divided in two with a major line divided into 5 with minor lines and divided in 10 with increment lines The grid lines styles and thickness are determined in the Log Configuration window located under the Edit pull down menu The Scale markings numbers are dictated in this portion of the window as well The Minor linear cycles takes precedent so in this case you would have 5 markings on the scale The frequency of the scale is determined in the Display options tab Log Cycles Bo Log Cycles The number of Log cycles is directly dependent on the Scale of the curve that is represented on this layer The system does not mandate any values and will attempt to display the curve scale with the Log
77. ay Layer Name or Curve Scale on Track check box Then click on the button How to Change the Carbonate Texture Pattern from a Solid Color to a Hatching Pattern on your log This can only be represented with the Lithology Profile deactivated Lithology Profile jn the System Options Display Tab dialogue window This will also change all the carbonate texture and matrix layers on all logs 1 Click on System Options selection under the Options menu selection This will activate the System Options tab dialogue window 2 Click on the Display Tab Carbonate Textures Fill Pattern Downward hatch left to right at 45 degrees Downward hatch left to right at 45 degrees Fs Upward hatch left to right at 45 degrees Horizontal and vertical crazshatch 3 Then select the Carbonate Texture pattern Crosshatch at 45 degrees from the Fill pattern list drop box 4 Select the Foreground Color Line Color from the Patter Color MEI selector button s Ok 5 Click on the ok button after you have changed your selection 6 You may also have to change the background color of the Carbonate Texture as well To do this click on the Carbonate Texture layer Addendum Manual Version 9 0 page 114 POWERXSUITE Addendum User Manual Version 9 0 7 Click on the Layer configuration selection under the Edit pull down menu This will activate the Layer configuration tab dialogue window 8 Click on the egund Color black E
78. ayer for that interval 1 Double click on the Rock Accessory track layer to activate the Rock Accessory Symbol window The toolbox can be turned on or off by clicking on the lone button in the builder Toolbox x Favorite List Rock Accessory Builder Thinbed bd Component k Matris Cement Abundance Bi E W Dbl Click Interval Entry Top Base i Snap To Nearest Edit Favorites Toolbox Save 2 Right click anywhere on the Rock accessories track layer to activate the pop up menu shown on the next page 3 Click on Rock accessories selection to activate the pop out favorites list menu and then select from the list or click in the builder drop down menu selections to access the list provided in them Either way once you have selected one it will be populated in the builder Rock Accessories gt b Abundance Argillaceous Argillaceous Calcareous Calcareous Carbonaceous Chert dark Clay Coal Crptocrystalline Earthy Fish Remains Fossil Glauconitic Intraclast Lithic grain Limestone mud supported Micromicaceous Microcrystalline Mineral crystals Minerals dark Plant remains Pyritic Sandy Shale gray Sideritic Siliceous Delete Edit Options gt an a a E E i Exit Siltstone Silty Sandstone Stylolitic ce Ggeagers 2x te CEL DETE EE Addendum Manual Version 9 0 page 131 POWERSSUITE Addendum User Manual Version 9 0 4 Click on the Abundance sel
79. bundance Occasional V Dbl Click Interval Entry Edit Favorites V Snap To Nearest TES Save Top Base Exit 2 Right click anywhere on the Sedimentary Structure track layer to activate the pop up menu Sedimentary Structures gt Abundance gt Delete Edit Options gt Exit 3 Click on the Sedimentary Structures favorites list to activate the pop out menu and then select from the pop out list or click in the builders drop down menu selections to access the list provided in them Either way once you have selected one it will be populated in the builder Abundance gt Climbing ripple cross lamination Contorted slumped laminations Current ripple cross lamination Flaser laminations High angle parallel laminations High angle cross laminations Low angle parallel laminations Low angle cross laminations Chevron cross bedding Centimeter bedding Decimeter bedding Herringbone cross bedding Delete 3 Edit Options gt i Exit Ie hha io Hummock cross bedding Inverted graded bedding Massivefhomogenous bedding Bioturbated churned Bioturbated moderately Bioturbated moderately well Bioturbated slightly Bioturbated well Boudinage Sausage structure lt Dish structure Flame structure Flute mark 4 Ifan abundance is required right click on the existing sedimentary structure Click on the Abundance selection to activate the pop out menu and then select from the pop out
80. cale is handled in the Systems Options window under the Options menu selection If you have selected 1 symbol every 2m at the 1 240 scale you will get 1 symbol every 1m at the 1 120 scale 1 symbol every 4m at the 1 480 scale and so on 8 Repeat Steps 3 5 to add more trace fossils to the track Note There are two ways how abundance can be shown If in the System Options window you have checked W Arowed Subintervals option each interval will be displayed with a different line style which specifies the abundance you have selected E g if occasional an interval arrow will be displayed as a dashed line while if abundant an interval arrow will be displayed as a thick solid line Otherwise all symbols within an interval will be displayed in the certain color which specifies the abundance you have selected E g if occasional symbols will be blue on the other hand if abundant symbols will be red 9 Press the Esc key on the keyboard to exit from the Trace Fossil selection window Resizing an Interval 7 Double click on the Trace Fossil track layer to activate the Trace Fossil Builder window Mouse Pointer Method 8 Press the Ctrl key down on the keypad and move the mouse pointer over the interval ends If done correctly the mouse pointer will turn into a resize cursor 9 Click and drag the mouse to the new desired top or bottom depth Release the mouse button and the interval will be resized Keypad Method 1 Click once o
81. can click on the Calculate Thick aaa ee button if you wish the program to calculate the Measured Depth thickness between this formation and the next formation in the list Note When the Thickness field is filled in with the measured depth thickness of the formation you will be able to generate a sample description report with formation tops that will contain all your sample descriptions Tops Mo TYO Tops Depth section You may enter the Measured Depths and True Vertical Prognosis zoo o Depths in these fields If you have entered survey point data and have filled in or calculated the TVD fields and you have a survey point above and below the depth Sample 445 378 1 3 of this formation the True Vertical depths will be calculated for the user Log 447 378 fate Note Formations are normally ordered by their depths starting with Log Tops TVD then MD followed by Sample Top TVD then MD and lastly by Prognosis Tops TVD in all the well end and morning reports where the tops are generated Subsea This is calculated from the depths entered in the Tops section and the K B elevation that you entered in the Well window Subsea is calculated successively using the following data respectively Prognosis depth Sample Top MD Sample Top TVD Log Top MD and finally Log Top TVD Alignment This is used to align the Formation Top in a Formation long name layer using Format 2 in the Layer Configuration window The follo
82. ck Layer savi Formation This track can be divided into as many as 3 portions If this box is checked indicates that Member the Formation information will be displayed on the Formation Track Layer Display attop Member This track can be divided into as many as 3 portions If this box is checked indicates that the Member information will be displayed on the Formation Track Layer Display at top If this box is checked indicates that the Group Formation Member information will be displayed at the top of the interval instead of the middle of the interval Age Display This portion of the window is only applicable to the Ages Track Layer that displays the Era Period series and stage information that is entered into the Formation Report Formation Display 2555 DEES Era This track can be divided into as many as 3 portions If this box is checked indicates that the Era information will be displayed on the Ages Track Layer Period This track can be divided into as many as 3 portions If this box is checked indicates that the oe die Period information will be displayed on the Ages Track Layer Stage This track can be divided into as many as 3 portions If this box is checked indicates that the Stage information will be displayed on the Ages Track Layer Display at top If this box is checked indicates that the Era Period Stage information will be displayed at the top of the interval
83. ck for Mult Transter Fromm 0 roe if ake W Single Transfer Core Section i Tranter Depth Range Transter i Tranter Short Form Top Depth Only List o The button activates a list of all descriptions that are entered into the current well From to as The From and buttons allow you to select an interval or range of Sample or Core Descriptions to be transferred If you utilize these buttons the user must deactivate uncheck the Single Transfer check box E You may also then disregard whatever information is being displayed within the Interval From Interval To and the Description fields See Transferring Multiple Sample Descriptions on the following page When activated the Single Transfer check box w only allows for the transfer of the single description currently being displayed within the Sample Core Description Transfer window When the Single Transfer is deactivated unchecked it will allow the user to transfer Multiple Descriptions to the log The Core Section check box when activated sets the display scale of the Descriptions selected to be transferred onto the Lithology Description layer to 1 120 Note The Core Section check box does not have to be activated checked in order to transfer a Core Description to the log It is only used to modify the display scale from 1 240 to 1 120 in order to limit the overlapping of descriptions within the standard 1 240 log scale The Transfer Depth Range ch
84. ck which will override these buttons Display scale drop box This allows the user to change the display scale for each annotation to adapt to the printed or viewing scale of the log The All Scales selection will display the annotation at all viewing and printing scales from 1 5 to 1 5000 If you select a different display scale then the annotation will be viewed at that viewing and printing scale and smaller Anything larger than the display scale and the annotation will not be viewed or printed This should alleviate the annotations overlapping each other when printed out on different scales For example if the user were to choose 1 120 the annotation would show up on viewing printing scales from 1 120 to 1 5 and not show up on scales from 1 121 to 1 5000 ll Line Style Selector and Line Thickness drop boxes These drop the user to select a different line style for their drawn line as well as the boxes allow line thickness Wa for the line that is associated with each individual annotation You can Sine Vi ave only have one G traiaht line per annotation The line can only be redrawn and not moved This button will show hide the text for a particular annotation a This button will show hide the line for a particular annotation o This button will show hide an outline around the annotation The grey box you see around all annotations will not be printed Only when this button is activated will the box be printe
85. close this window and activate the MDT Data Import window shown on the next page Open Map File 8 oe 4 Inthe upper portion of the window click on the button This will activate an open file window MDT Data Mapping File Look in CNAL Demo i ati tsi Jpeg Images Core in Boxes O 3PG_Images mdt mapping File mndt File name mdt mapping file mdt Files of type MDT Data Map files mdt Cancel 5 Select the mapping file with the mdt saved from previous imports of similar MDT data files to your dip Open meter table by highlighting the file and clicking on the button or double clicking on the file name Once the file has been opened it will refresh with the current mapping configuration as shown below N B The user can Right click on the Field to remove the mapping 6 The user can map more data columns on the left side of the window by Clicking and dragging the column you wish to import to the field on the right side and release it when the layer becomes highlighted Addendum Manual Version 9 0 page 15 POWER SUITE Addendum User Manual Version 9 0 MDT Data Import MOT Run Open File Open Map File Save Map File Clear All Mapping Click and Drag with the Left Mouse button Drag the columns of the data file over to the corresponding field Data Column l Column 1 A Seg Ho Column 1 vine Column 2 ae Measured Depth Column 2 MBE Column 3 AE TVD Depth Column 3 MEE Column 4 NE SSL Depth Column 4
86. cuted The user will not see any symbols on their log or print out any of our reports it you have the wrong home directory W Show All Wells at Startup This check box when M activated will populate the Open Log window with all the wells in the database If it is unchecked it may help our corporate users and the time it take to retrieve thousands of wells from the database and to populate the Open Log window with that information If this check box is deactivated and CI you wish to see all your wells then simply click on the Saul button in the Open Log window to see all their wells if this option is deactivated Dee Sennen Date Format From this drop box you can select the date format This selection determines how every date in Power Log Core amp Curve will be entered and displayed If MMM DO ery you import a log with different date formats Power Log Core amp Curve will change the Mh DOAA dates to comply with the format you ve chosen here The user can change this at any time MMOD Saya and all the Date formats will be changed in the database MMM OD ry yy MMOD Version Compatibility Enables the user to achieve compatibility for Annotations in the ey MM DD older Versions of Power Suite V1 81 and before and the Annotations in the newer Versions of Power Suite V1 9 and later Data Buffer Lookahead The number placed in this field determines how far ahead and behind the current top depth will be stored in the comp
87. d wit show hide an arrow pointer at the end of a line draw fad Will show hide an arrow pointer at the start of a line draw gt Will show hide an tail at the end of a line draw Will show hide an tail at the start of a line draw Adding Annotations Lithology Descriptions 1 Make a Lithology Description or Annotation layer active by clicking on the track that has an Annotation layer on it and then selecting that annotation layer you want to work with from the Layer Section list on the Selection Toolbar 2 Define an area or box outline by clicking and dragging the left mouse button from the upper left corner to the lower right corner of the desired area to form a rectangular shape and then releasing the left mouse button on an Annotation layer to activate the RTF Font and RTF Lines and Boxes toolbars shown below Bold ltalizised RTF Box Centre Font Type l RTF Box Left RTF Box Right style and Size Underline a ie strikethrough Display Scale RTF Lines and Boxes al Scales Text Left neni Line Style Line Thickness Text Centred Font Background Color Display Text Tail on End of Line Font Color Tail on Start of Line ToD igni Display Line Tab Lett Arrow on End of Line Bullets Display Box Outline Arrow on Start of Line 3 Click once more in the drawn area and you will get a flashing cursor 4 Type in your annotation Addendum Manual Version 9 0 page 107 POWERSSUITE Addendum User Manual Version 9 0 5
88. d accordingly 4 Repeat Steps 2 and 3 to delete more Degree of Bioturbation intervals from the Bioturbation track layer 5 Press the Esc key on the keyboard to exit from the Bioturbations Builder window Deleting Multiple Intervals 1 Double click on the Bioturbation track layer to activate the Bioturbations Builder window Addendum Manual Version 9 0 page 126 POWERXSUITE Addendum User Manual Version 9 0 Bioturbations biotrbe Bioturbated churned v Abundance Common IV Dbl Click Interval Entry l Snap To Nearest Top 110 28 Base joz Toolbox Save 2 Press and Hold the SHIFT Key and then click and drag an area anywhere within the intervals you wish to delete 3 Release the mouse button to activate a Confirm Multiple Delete message Confirm Multiple Delete 7 Delete these Symbols Yes Mo Y l ee 4 Click on button and the Bioturbation interval encompassed with your drag will be deleted accordingly 5 Press the Esc key on the keyboard to exit from the Bioturbation Builder window Note Every type of layer in Power Log Power Core and Power Curve has a Data Type classification The default E settings for the Bioturbation layer are shown below To access this window click on the Layer Configuration button on the Toolbar when the Bioturbation layer is active Active Layer Configuration Bioturbation Layer Display Settings Curve Definitions Layer Scales Data Group IDs
89. d any layer to a log it is always associated with a Data Type Every data type in Power Log Core amp Curve has a default setting The default settings for a Lithology Description layer are shown below To Ea access this window click on the L Layer Configuration button on the Toolbar when the layer is active Active Layer Configuration Lithology Description Layer Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions Save Undo Data Type z Name ELTE AES Uwi Display Layer Name or Curve Scale on Track Foreground Color black o o v Show Layer on Track Depth Offset Ee l Display Vertical Orientation Layer Name Display Scale Placements Every Start at l Display Backup scales Display scales on non active layers Display Full Logarithmic Scale Display Depth Axis Grid Display Data Axis Grid Cancel Help Active Layer Configuration Lithology Description Layer Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions E fs Annotation Group Directional Survey Detailed Lithology Group lithtext1 Generic Category Graphics Dip Meter Group MDT Run No Cancel Help Addendum Manual Version 9 0 page 41 POWER SUITE Addendum User Manual Version 9 0 Core Descriptions This report allows you to describe a Core on an inter
90. d down the CTRL Key and click Pee OK a on subsequent descriptions to highlight them Then click on the button This will place all the descriptions in the Lithology Summary Window To Transfer a range of descriptions Click on a Description in this window then hold down the SHIFT Key and click on the last descriptions to highlight the entire range You can also hold down the CTRL Key and click on subsequent descriptions to highlight them Then click on the button This will place all the highlighted descriptions in the Lithology Summary Window OR the Alternate Range Selection Utility 1 2 Or click on the edd button to select the starting depth of the first interval that you wish to transfer to l Click on the to button and select the starting depth of the last interval to be transferred Then click on the button This will place all the highlighted descriptions in the Lithology Summary Window Addendum Manual Version 9 0 page 59 POWER SUITE Addendum User Manual Version 9 0 Litholopgy Summary on Mar 11 2008 x Save Undo New Del i Nesa Last Annotations Sample Interval 665 to 770 Descriptions Lithology Description To Long Desc BBS 697m Se It gy Ik gy brn m ec gr occly w c gr modly w ert shang sbrdd gtz occ mica flks tr fld tr chlor sl trs dolic cmt predly disagad g est intgran por 16 202 tr ptch brn o sting bri yel flor g inste stmg mky vel cut flor 697 701m
91. d in the Gas Summary window make any changes you feel are necessary Click on the Sate button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Deleting a Gas Summary Th Interval Click on the Interval button to view a list of Gas Summaries to date and then double click on the record Del that you wish to delete Once the selected record is displayed in the Gas Summary window click on the Delete button First P Next Last Or use the Database Navigational Tools Fist Prev Newt Last to navigate through the records See the Database Navigational Tools section later in this User Manual for more information Select the record you wish Del to delete and it will be displayed in the Gas Summary window Then click on the Delete button Ves The user will be prompted with a confirmation Do you really want to delete Click on the tes button Unda button will restore the window to the settings of the last saved record You can Tab between fields or press Shift Tab to move backwards between fields Field Restriction Table Base Depth Optional All fields Optional Remarks 40000 Optional Addendum Manual Version 9 0 page 62 POWERXSUITE Addendum User Manual Version 9 0 MDT Report Window Reports pull down menu item MDT Report window information is entered into the window shown below This information fills in the header of
92. dd more Carbonate Texture Matrixes Note The intervals that belong to the active layer are purple The non active layers data are black e g the intervals within the Carbonate Texture Matrix layer are purple while the intervals within the Carbonate Texture layer are black Also if you have already added a sub interval and are now adding an entire interval the sub interval will now take priority Addendum Manual Version 9 0 page 118 POWERXSUITE Addendum User Manual Version 9 0 7 Press the Esc key on the keyboard to exit from the Carbonate Texture Builder window Deleting an Entire Interval 1 Make the Carbonate Texture Matrix layer active within the Carbonate Texture track by clicking on the track and then selecting the Carbonate Texture Matrix layer from the Layer Selection List field 2 Double click on the Carbonate Texture Matrix layer to expand the Carbonate Texture track and to activate the Carbonate Texture Matrix Builder window 3 Onthe Carbonate Texture Matrix layer right click anywhere within the interval that you wish to delete to activate the pop up menu Delete Sub Delete Entire Entire Interval Sequence F SubInterval Sequence w Soft Edge Hard Edge Edit Options Exit 4 Click on Delete Entire and the Carbonate Texture Matrix will be deleted accordingly 5 Press the Esc key on the keyboard to exit from the Carbonate Texture Matrix Builder window Adding a Sub Interval 1 Make the Carbonate T
93. dded to the Interpreted Lithology Layer for that interval 1 Make the Grain Size Matrix layer active within the Grain Size track by clicking on the track and then selecting the Grain Size Matrix layer from the Layer Selection List field 2 Double click on the Grain Size Matrix layer to expand the Grain Size track and to activate the Grain Size Matrix Builder window shown below Grain Size Matrix Builder fx Del Size Sequence Fr es Entire Interval 1452 50 to 1460 00 f snd fine sand e to mend medium sand Sub lrterval Size Sequence Gan es iM Snap to closest lithology ae 2 P W Dbl Click Interval Entry W Soft Edges 3 Click and drag the mouse pointer from a specific Measured Depth and Grain Size as indicated within the mouse pointer display box to another Measured Depth and Grain Size e g 1199 00 vf snd to 1209 00 f snd on the Grain Size track 4 Release the mouse button and the entire Grain Size Matrix interval will be drawn accordingly Note If you want to fill in the entire interval with only one grain size and not a range of grain sizes and you have the w Dbl Click Interval Entw Selected in the builder simply double click in the interval the grain size you wish to enter and it will fill in the entire interval with your selection 5 If you wish to see a different type of sequence and the user has previously dragged the entire interval right click within the interval to be changed and sel
94. ded portion of an Interpreted Lithology Interval The following procedure will delete the Interbedding only If you wish to delete the entire lithology delete the Lithology from the Rock type builder 1 Double click anywhere within the Interpreted Lithology track to activate the Rock Type Builder window as well as your Favorites List Toolbox 2 Right Click on the drawn lithology and select Interbedding from the pop out menu as shown below or Click on the lithology and Click on the _Interbeds button in the Rock Type Builder This will activate the Interbed window also shown below Interbedding Actessor Rock Type Main Lithology k a ar md brec mud breccia Grain Size ve snd ver coarse sand to c pbl coarse pebbles Coarsening Upwards W Finning Upwards Carbonate Texture to Coarsening Upwards Finning Upwards Secondary Lithology Interbed Paar ren Ss Sandstone Rocks H Grain Size VE end very fine sand wii fend fine sand Base Contact Carbonate Texture to Save Delete Top Interbed 30 Base Interbed 50 Acc Builder Bedding Thickness Decimeter DMM kd Interbedding Edit Options F Ewit Save DEL Click on the wet button 4 The user can now go back to the Rock type builder by clicking on the Rock Type button Also the user can go to the accessory builder by clicking on the MEE ASS button Or the user can exit the builder altogether
95. display the grain size with curved edges and rounded angles between the Carbonate Textures Interpreted Lithology Layer Show Bedding Contacts When this check box is activated the bedding contacts lines between the drawn lithology types in the Interpretive Lithology Layer will be shown Interpreted Litholagy Layer Shaw Accessories When this check box is activated it will turn on the accessories in the Interpretive Lithology Layer Monitor Height This option allows you to scale your monitor for Power Log Core so you may correlate on screen wells with hard copy logs that you may have It is recommended that you take an opportunity to measure the vertical viewing area of your monitor in inches and then insert that value in the Monitor Height field Be aware however that if you adjust the screen height knob on your monitor this will affect the monitor height setting Monitor Width This option allows you to scale your monitor for Power Curve so you may correlate on screen wells with hard copy logs that you may have It is recommended that you take an opportunity to measure the horizontal viewing area of your monitor in inches and then insert that value in the Monitor Width field Be aware however that if you adjust the screen width knob on your monitor this will affect the monitor width setting Note You must restart Power Log Core amp Curve for the Monitor Width Height changes to take effect This drop box option will d
96. drop box and select in this case a background color for your grain size 9 Click on the as button Adding an Entire Interval Note All description categories such as Carbonate Texture are associated with a Rock Type and must have a Rock Type in order to be saved to the database Therefore you cannot add an entire interval or sub interval of Carbonate Texture until there is a rock unit or bed interval added to the Interpreted Lithology Layer for that interval 1 Double click on the Carbonate Texture layer to expand the Carbonate Texture track and to activate the Carbonate Texture Builder window Carbonate Texture Builder Save Del Not Selected Entire Interval to Sequence Sub Interval to Sequence i Snap to closest lithology W Dbl Click Interval Enty i Soft Edges 2 Click and drag the mouse pointer from a specific Measured Depth and Carbonate Texture as indicated within the mouse pointer display box to another Measured Depth and Carbonate Texture e g 188 00 floatstone to 190 20 rudstone on the Carbonate Texture track C 3 Release the mouse button and the entire Carbonate Texture interval will be drawn accordingly Note If you want to fill in the entire interval with only one Carbonate Texture and not a range of textures and you have the Dbl Click Interval Ent Selected in the builder simply double click in the interval the carbonate texture you wish to enter
97. e 110 POWERXSUITE Addendum User Manual Version 9 0 a a Font Font style Lf Arial F F Arial Black Cancel Book Antiqua Bookman Old Style Bookshelf Symbol 7 Century Gothic Sample PEE Change Properties Range J Change Font Sizes List Change Font Color Script Resize to Track Box Alignments m Change Display Scale Edit Options This ig an OpenType font This same font will be used on both your printer and your screen xi Click on the Change Properties Range selection and this will activate another pop out menu Click on the Change Font Sizes selection to activate the Font Window shown above Select the appropriate Font Font Style and Size from their drop boxes Click on the 2 button This will activate the Format range window Format Range Use Oto O for the whole log Depth Interval 0 to o Ok Cancel Enter specific values into the Interval From and Interval To fields if you are changing the font size for a specific interval of Annotations Otherwise leave the Interval From and Interval To fields defaulted to the numeral zero 0 for every Annotation on the log Ok ae oe a Click on the Button This will change the annotations over the interval specified in the range window for that annotation layer Globally Change the Annotation Font Color 1 oo See Make a Lithology Description or Annotation layer active by clicking on the track that has an Ann
98. e Bioturbations window Mouse Pointer Method 5 Press the Ctrl key down on the keypad and move the mouse pointer over the interval ends If done correctly the mouse pointer will turn into a resize cursor 6 Click and drag the mouse to the new desired top or bottom depth Release the mouse button and the interval will be resized Keypad Method 2 Click once on the Bioturbation Symbol you want to resize to bring it into the builder and change the from or to depth and or abundance and click on the __ Save button Remember if it is a bed restricted layer that the top or bottom of the Lithology interval will take precedent Moving an Interval 1 Double click on the Bioturbation track layer to activate the Bioturbations window 2 Move the mouse pointer over the interval to be moved Click and drag the interval to a new position The bed restricted interval will not be allowed to move outside the interval of the lithology it is associated with Deleting a Single Interval 1 Double click on the Bioturbation track layer to activate the Bioturbations window Bioturbations biotrbe Bioturbated churned v cm V Dbl Click Interval Entry lv Snap To Nearest ie 110 28 pace 110 72 Toolbox Save 2 Right click anywhere within the interval you wish to delete to activate the pop up menu Bioturbations gt Abundance gt Edit Options gt 3 Click on Delete and the Degree of Bioturbation interval will be delete
99. e Carbonate Texture and Grain Size layers with the interpretive lithology It will draw the lithology to the maximum size filled in over the interval Note The user may wish to turn off the track borders when this option is selected You will see an example of this shown below Grain Size sae E Yess Interpreted Lithology Grain Size Scale List box You may choose between Wentworth Canstrat or Amstrat Grain Size Seale Wentwoth Scales when using the Grain Size Builder The Wentworth Grain size only allows full grain Amstrat i i Careta i size while Canstrat Amstrat allow half grain sizes when drafting in the Grain size and matrix entwort layers Verbal Display This radio button will display the Grain Size Track header with the equivalent verbal grain sizes such as such as C slt VF snd F snd M snd C snd etc i IS ulese Soe IS UEJE tM a s z3 I d fa Verbal Scale oe da MM Scale mm Display This radio button will display the Grain Size Track header with the equivalent numeric grain sizes in mm such as 0625 125 25 5 1 2 etc as shown above C Hard Edges This radio button will display the grain size with strait edges and right angles between the grain sizes The illustration below is shown with Lithology Profile activated M 82g UMD a 32S UMD n fy Q i f pusw PUS 4 pus 4 f ao 48 LU 18 3 a 3 a a t Q Q Q Q gt gt f
100. e Digital Curve window and the user can edit the curve attributes as well as get at a secondary window to edit or view the curve scales There are three ways to change the Curve Attributes One is through the Layer Configuration window and the other is in the Well Window and is located under the Edit pull down menu The last way is to right click on a curve layer and select Edit Curve from the pop out menu selection The Curve Field between the Curve and Curves Button shows the curve that is being displayed on that particular curve layer The Width Field indicates the width of the curve in pixels To change click in the Width field and typing in a new curve width Values 1 9 The Pattern Field indicates the line pattern associated with the curve The user has five 5 patterns to choose from PtoP point to point curve stop curve at null values PtoP2 point to point curve disregard null values continuous curve Box histogram or box curve stop curve at null values Box2 histogram or box curve disregard null values continuous curve Track Fill fills track with color determined in the pgeology32 ini Histogram draws a colored histogram the width of the line width from the data point back to the lowest value track edge Points Only shows only the data points and defaults to circles if nothing defined in the point indicator portion of curve definitions Addendum Manual Version 9 0 page 27 POWER SUITE Addendum User Manual Versi
101. e Entire Interval Sequence selection and select one of the appropriate selections The grain size appearance will be redrawn to reflect the newly selected criteria Delete Sub Delete Entire SubInterval Sequence d Entire Interval Sequence Fining Upwards w Soft Edge Coarsening Upwards Hard Edge Blocky Edit Options Exit 5 Repeat Steps 2 4 to add more Grain Sizes 6 Press the Esc key on the keyboard to exit from the Grain Size Builder window Note If you have already added a sub interval and are now adding an entire interval the sub interval will now take priority Deleting an Entire Interval 1 Double click on the Grain Size layer to expand the Grain Size track and to activate the Grain Size Builder window 2 On the Grain Size layer right click anywhere within the interval that you wish to delete to activate the pop up menu Addendum Manual Version 9 0 page 85 POWER SUITE Addendum User Manual Version 9 0 Delete Sub Delete Entire SubInterval Sequence i Entire Interval Sequence P w Soft Edge Hard Edge Edit Options Exit 3 Click on Delete Entire and the Grain Size will be deleted accordingly 4 Press the Esc key on the keyboard to exit from the Grain Size Builder window Adding a Sub interval 1 Double click on the Grain Size layer to expand the Grain Size track and to activate the Grain Size Builder window 2 Click and drag the mouse pointer from a specific Measured Depth and Gra
102. e No Pattern Hard edges Carbonate Texture Pattern Soft edges Addendum Manual Version 9 0 page 117 POWER SUITE Addendum User Manual Version 9 0 If the user has the Carbonate Texture Matrix layer added to the Carbonate Texture track the user should verify that the Lithalogy Profile check box is not activated Click on System Options Display Tab under the Options menu selection and then uncheck the MEEMEHEE check box Then click on the E button Note If the Carbonate Texture track contains two headings that overlap click on the Edit pull down menu select Layer Configuration and uncheck the Display Layer Name or Curve Scale on Track Then click on the save button Adding an Entire Interval Note All description categories such as Carbonate Texture Matrix are associated with a Rock Type and must have a Rock Type in order to be saved to the database Therefore you cannot add an entire interval or sub interval of Carbonate Texture Matrix until there is a rock unit or bed interval added to the Interpreted Lithology Layer for that interval 1 Make the Carbonate Texture Matrix layer active within the Carbonate Texture track by clicking on the track and then selecting the Grain Size Matrix layer from the Layer Selection List field 2 Double click on the Carbonate Texture Matrix layer to expand the Carbonate Texture track and to activate the Carbonate Texture Matrix Builder window Carbonate Texture Matrix Builder 5
103. e button Hip Lln eloi brown zi Dip Line Color selector allows the user to define the line and circle color of the dip data so that you can utilize multiple groups on a single track and you can differentiate between them 3D Look 3D Look check box when activated will give the dot or indicator a 3 Dimensional look rather than a flat look Quality by Size Quality by Size check box when activated will allow the user to identify the quality of the dip reading by size rather than a color fill lood Examples of both are shown below Ouchy auahi gt 0O O oOo gt p Quality by Size checked Quality by Size not checked Once a field in this Layer Configuration Tab dialogue window has been changed the user must then click on the Save button or press ALT S Field Restriction Table Addendum Manual Version 9 0 page 34 Name 30 Character Mandatory Sequence 5 0 Numeric Optional Remarks 100 Character Optional UWI 20 Character Optional Annotation Group 30 Character Optional Directional Survey 30 Character Optional Depth Grid Style 5 Character Optional Data Axis Type 15 Character Optional Data Axis Style 5 Character Optional Log Cycles 5 0 Numeric Optional Major Linear Cycles 5 0 Numeric Optional Minor Linear Cycles 5 0 Numeric Optional Increment Cycles 5 0 Numeric Optional Scale Left 10 5 Numeric Optional Scale Right 10 5 Numeric Optional Scale Units 10 5 Numeric Optional Curve ID 30 Character Optional Curve Line Width 1
104. e interval Tip The frequency of symbols if not utilizing the arrows subintervals at any given scale is handled in the Systems Options window under the Options menu selection If you have selected 1 symbol every 2m at the 1 240 scale you will get 1 symbol every 1m at the 1 120 scale 1 symbol every 4m at the 1 480 scale and so on 8 Repeat Steps 3 5 to add more rock accessories to the track Note There are two ways how abundance can be shown If in the System Options window you have checked Arowed Subintervals option each interval will be displayed with a different line style which specifies the abundance you have selected E g if occasional an interval arrow will be displayed as a dashed line while if abundant an interval arrow will be displayed as a thick solid line Otherwise all symbols within an interval will be displayed in the certain color which specifies the abundance you have selected E g if occasional symbols will be blue on the other hand if abundant symbols will be red 9 Press the Esc key on the keyboard to exit from the Rock Accessory Symbol window Addendum Manual Version 9 0 page 132 POWER SUITE Addendum User Manual Version 9 0 Resizing an Interval 1 Double click on the Rock Accessory track layer to activate the Rock Accessory window Mouse Pointer Method 2 Press the Ctrl key down on the keypad and move the mouse pointer over the interval ends If done correctly the mouse pointer wi
105. e interval or can stand alone as a sub interval without being part of a entire interval You can have as many sub intervals as you wish If you have a sub interval equal to or greater than the rock unit or bed and the top intervals are identical the sub interval will become an entire interval Snap to W Snap To when checked allows the user to find the top or bottom of an interval easily with the mouse pointer as you have to be within 10 times the mouse pointer or screen accuracy of the interval to catch the top or bottom with a drag Double Click Interval M bl Click Interval Entry When checked will allow the user to enter a porosity grades over an entire interval with a double click on the left mouse button Soft Edges w Soft Edges When checked will round off the porosity grades and will present the porosity grades edges with sine wave lines instead of strain lines Porosity Pattern and Color ter Crosshatch EER El Pattem Color Ml Those selectors allow the user to select a specific pattern and foreground color for the lines for the porosity grade indicators The user may have to change the background color for the porosity grade in the layer configuration window so that the lines show on the layer le black on black is Apsosod 26 Apsosog oz Si at 1 oz i at F Porosity Grade No Pattern Hard edges Porosity Grade Pattern Soft edges How to Change the Porosity Grade Pattern from a Solid Color to a Hatching Pattern
106. e sample description to the log when it is saved It will transfer with the options specified in the transfer Options discussed below The Transfer to Annotation Group selection drop box indicates which group the description is being transferred to This window will default to Lithtext1 If this is not the group you wish to transfer you descriptions to select a different group from this drop box Note The first log created for a well will have a lithology description layer identified with a group called lihtext1 the second log created for a well will have a lithology description layer identified with a group called lihtext2 etc The user can select any annotation group that exists for that well The Transfer Depth Range check box when activated will transfer the from and to depth intervals to the log The Transfer Top Depth Only check box when will transfer only the from depth interval to the log The Transfer check box when activated will transfer the rock to the log The Transfer Short Form check box when activated will transfer the short description to the log When this selection is unchecked the samples long sample description will be transferred to the log Adding a Sample Description 1 Click on Sample Description under the Reports menu selection If any descriptions have been Hew entered for the current well the last description will be displayed Click on the button The intervals are set to zero 0 and the curs
107. eck box when activated will transfer the From and To Depth Interval to the log The Transfer check box when activated will transfer the rock to the log The Transfer Short Form check box when activated will transfer the short description to the log When this selection is unchecked the samples long sample description will be transferred to the log The Top Depth Only check box when activated will transfer the only the From Interval or Top of the interval described to the log Addendum Manual Version 9 0 page 67 POWER SUITE Addendum User Manual Version 9 0 Transferring one Sample Description Sample Core Description Transfer Undo First Prev Next Last 1030 io 1035 Ss It gy It gush bra m c gr ocel ve gr modly w srt shang sbrdd gtz cam micas Iks ron fld occ tre sils cmt predly disaggd g est intgran por 18 2422 com abnt brn o stng bri vel flor g insts mky wel cut flor Selections for Multiple Description Transfer Uncheck for Multi Transter From 0 to 0 ae W Single Transfer Core Section W Tranter Depth Range Transter W Transfer Short Form Top Depth Only DI k Click on Sample Core Description Transfer under the Options menu selection or click on the Sample Core Description Transfer button on the Toolbar to activate the Sample Core Description Transfer window which will then display the last description entered into the current well as First P Y Next L
108. ect the Entire Interval Sequence selection and select one of the appropriate selections The grain size matrix appearance will be redrawn to reflect the newly selected criteria Delete Sub Delete Entire SubInterval Sequence Entire Interval Sequence Fining Upwards w Soft Edge Coarsening Upwards Hard Edge Blocky Edit Options Exit 6 Repeat Steps 2 4 to add more Grain Size Matrixes Note The intervals that belong to the active layer are purple The non active layers data are black e g the intervals within the Grain Size Matrix layer are purple while the intervals within the Grain Size layer are black Also if you have already added a sub interval and are now adding an entire interval the sub interval will now take priority 7 Press the Esc key on the keyboard to exit from the Grain Size Builder window Addendum Manual Version 9 0 page 89 POWER SUITE Addendum User Manual Version 9 0 Deleting an Entire Interval 1 Make the Grain Size Matrix layer active within the Grain Size track by clicking on the track and then selecting the Grain Size Matrix layer from the Layer Selection List field 2 Double click on the Grain Size Matrix layer to expand the Grain Size track and to activate the Grain Size Matrix Builder window 3 On the Grain Size Matrix layer right click anywhere within the interval that you wish to delete to activate the pop up menu Delete Sub Delete Entire SubInterval Sequence Entire Inte
109. ection to activate the pop out menu and then select from the pop out list or click in the builders drop down menu selections to access the list provided in them Either way once you have selected one it will be populated in the builder Rock Accessories gt Delete Trace Occasional Edit Options gt Common Exit Abundant 5 Click and drag the mouse on the track layer over the desired interval Or If you just click your mouse on the track layer This will insert a subinterval of whatever was selected in step 3 and will be added to the layer track at the depth you clicked at The interval size is defaulted to the screen scale accuracy setting The sedimentary structure interval will be drawn accordingly 6 Double Click within an existing rock type interval in the Bioturbation layer with the W Dbl Click Interval Entry activated and the entire interval will be filled in with the attributes that have been entered into the Bioturbation window 7 Click and drag the mouse on the track layer close to an existing Bioturbation Symbol either above or below in the same column with the Ww Snap To Nearest activated and there will be no spaces between the bioturbations Remember you have to be within 10 times of the mouse pointer or screen accuracy from the previous symbol to have the snap to take effect Note Regardless of the thickness of the interval that you have added to the log at least one symbol will be drawn in the middle of th
110. elect one of the appropriate selections The grain size appearance will be redrawn to reflect the newly selected criteria Delete Sub Delete Entire SubInterval Sequence 2 Fining Upwards Entire Interval Sequence Coarsening Upwards w Soft Edge Blocky Hard Edge Edit Options Exit 6 Repeat Steps 2 4 to add more Grain Size Matrix sub intervals to the Grain Size track 7 Press the Esc key on the keyboard to exit from the Grain Size Matrix Builder window Deleting a Sub Interval 1 Make the Grain Size Matrix layer active within the Grain Size track by clicking on the track and then selecting the Grain Size Matrix layer from the Layer Selection List field 2 Double click on the Grain Size Matrix layer to expand the Grain Size track and to activate the Grain Size Matrix Builder window 3 On the Grain Size Matrix layer right click anywhere within the sub interval that you wish to delete to activate the pop up menu shown below Addendum Manual Version 9 0 page 90 POWERXSSUITE Addendum User Manual Version 9 0 Delete Sub Delete Entire SubInterval Sequence Entire Interval Sequence w Soft Edge Hard Edge Edit Options Exit 4 Click on Delete Sub and the Grain Size Matrix sub interval will be deleted accordingly 5 Press the Esc key on the keyboard to exit from the Grain Size Matrix Builder window Expanded Combined Canstrat Wentworth Grain Sizes Clastic Crystalline Rocks Clastic Name Clastic Name Can
111. ents Matrix and Cement are the only properties that are not retained from the existing bed 1 Double click anywhere within the Interpreted Lithology track to activate the Rock Type Builder window previously shown as well as your Favorites List Toolbox 2 Select a rock type There are 4 ways to select a rock type e The user can click on the desired Rock Type from the Favorites Toolbox e The user can right click anywhere within the Interpretive Lithology track to activate the pop up menu shown below Then select by left clicking once on the desired Rock Type from the pop up menu e The user can select a Rock Type from the Rock Type field within the Rock Type Builder window if the desired Rock Type is not displayed in the pop up menu or Toolbox e The user can also click on a previously drawn lithology that is the same as you wish to draw with 3 If done correctly the selected rock type will be automatically displayed in the Rock Type field within the Rock Type Builder window 4 Click and drag the mouse button up or down within a specific track to define the Lithology interval Note This can be done on any track but more often than not the Interpretive Lithology Track is the most convenient 5 Release the mouse button and you will be prompted with a message asking Do you want to add an interbedded interval 6 Click on the ue button and the thinner bed will be drawn accordingly 7 The user can now define the base contact type b
112. er fp efw temp mob formation comment 1 201 201 799 2500 77 2002 44 1803 32 0 995 67 1 720 4102887 clearwater all ok 2 216 6 216 1 703 9 2510 35 2012 11 1813 99 0 995 69 2 700 5747173 clearwater all ok 232 2 231 2 768 8 2519 93 2021 78 1824 66 0 995 71 3 612 4146669 clearwater all ok 247 8 246 3 753 7 2529 51 2031 45 1835 33 0 995 73 4 925 5591136 clearwater all ok 263 4 261 4 738 6 2539 09 2041 12 1846 0 995 735 396 1 702937 clearwater all ok 279 276 5 423 5 2548 67 2050 79 1856 67 0 995 77 6 64 57052239 clearwater all ok 294 6 291 6 708 4 2558 25 2060 46 1867 34 0 995 79 7 163 2160302 clearwater all ok l l o SP Save Map Fie o 3 The user can save this mapping procedure at this time by clicking on the button and giving this procedure a file name and folder to be used again at a later date when you would have to import this data again mpar l 4 Click on the button After the data has been imported you will be prompted with a system message Database Message i Imported Successfully 5 Acknowledge the Import message Click on the button and then click on the to exit or E wit click on the button to close the Window Addendum Manual Version 9 0 page 14 POWERXSUITE Addendum User Manual Version 9 0 How to Import MDT Data with an Existing mapping file 1 To access the MDT Data Import window click on Import Export under File to activate the pop out menu and then select Import MDT or click on the 3 Import MDT button on t
113. er s font size up or down so that the font size on printouts can match the font size displayed on the screen As an example if the font size on the printout is bigger than the font you see on the screen then the user must reduce this printer font size percentage And vice versa if the font size on the printout is smaller than the font you see on the screen then the user must increase the value of this printer font size percentage How to Set your Fonts 1 Click on System Options selection under the Options menu selection To activate the System Options window 2 Then click on the Font Tab to activate the Tab Set 3 Click on the Set button beside the Font option you wish to change and this will activate the Font Window Font Font style rial Marrow Bold Cancel Book Antiqua aes Bookman Old Style Bookshelf Symbol 7 Bold Italic Century Gothic O Comic Sans MS Courier Effects Sample Strikeout Underline Sabiny Color C Black Script Westem l Thiz i an OpenType font This same font will be used on Goth your printer and your screen 4 Select form the Font Font Style Size Effects and Color When you are finished click on the button 5 Repeat steps 2 4 for all Font types 6 Click on the Ee ou button 7 If you want to set these as your default Font settings click on the M Set As Default Fonts check box 8 Click on the button in the Systems Options Tab dialogue window Addendum
114. ers to begin your abbreviations and leave the remaining letters in lower case This will produce lower case words that are capitalized in the long description Note You also have the option of typing out the non abbreviated form of the Sample Descriptions into the Long ae To ShortD Description field and then clicking on the ToShonDesc button to display the abbreviated form of the Sample Descriptions in the Short Description field Moreover you may also type out the Sample Descriptions abbreviated or non abbreviated using a Window s program such as Notepad or Word and then Copy Cut and Paste the Sample Descriptions into either the Short or Long Description fields within the Sample Description window 8 Click on the Savel button or press ALT S 9 To enter another description at the same interval click on the i button and repeat Steps 3 to 8 10 To add a description to a new interval click on the 3 button or press ALT N then click on the Auta Ine button or the Auto Newt button and repeat Steps 3 to 8 Note IT IS IMPORTANT TO SAVE EVERY RECORD You must click on the Save button or press ALT S every time you finish entering a new record Editing a Sample Description J 1 Use the Database Navigational Tools SS i Ee e ess to navigate through the records See the Database Navigational Tools section later in this User Manual for more information 2 Or Click on the Interval button to view a list
115. et ade 2 On the left hand side of the Log configuration window scroll down the list of tracks and click on the Multi Array Data Layer track The track will become highlighted and the Tracks radio button Tracks will become activated 3 On the right hand side of the Log configuration window click on the Track you want it to go above or to the right of In this example we will be adding the Multi Array track to the left of the Depth track or above the Depth track in the horizontal application The track will become highlighted and the Tracks radio button Tracks will become activated Add gt gt gt 4 Inthe middle of the Log configuration window click on the __Add gt gt gt button This will activate a System Message asking the user Do you really want to ADD the selected TRACK from the available log to the active log Y Ea 5 Click on the afi button This will activate a Get Name window allowing the user to name the track New Track Name Multi Array Density Dat x 6 Type in a Track name Multi Array Density Data Layer and then click on the o x button The track will be added above the Depth Track or to the left on the log and the Log Configuration Builder window will be shown Log Configuration Builder Available Logs Active Log Log SYSTEM v eal Log bit grade Tracks Yme Track Config Fi Add All gt gt gt Hole Dip Meter Data Interpreted Lithology Y 0 60 Ages a o Y 0 60 Forma
116. etaceous ptian Sample 445 378 13 Age million pears Thickness 6 44 Log 447 378 88 Calculate Thickness Display C Prog Smpl Log Eveens Annotations Samples To Long Desc The Main Tidsdale Sandstone was encountered fairly close to the prognosed depth at 368 11m TYD Intermediate casing was set at 512m MD or 387 05m TVD The horizontal section of the well extended for 525m and reached a masimum depth of 1037m MD The well bore stayed in a Fairly narrow window 380 2 to 383 8m TYD for most of the well The well bore dropped significantl when we were unable to steer ornent at a depth 960m MD when we were at an elevation of 383 8m TYO and dropped down to a maximum of 385 74m TYO at 1037m MO The upper limit of the hole was reached at a measured depth of B64m MD or 380 2m TYD where we encountered a significant increase in v Conclusion To Long Desc The Main Tidsdale Sandstone was drilled horzontally for 525m and encountered at least a minimum of 290m of good oil pay zones These zones should and will produce oll at a significant rate The porosity overall is quite good and there was no indication of water during any of the drilling of the drain section of this well This is a zone of much importance and should be further evaluated on downhole logs K B Ground and Casing This information is displayed based on the Well information that you entered in the Well window The Well window can
117. etailed Lithology layer added to a well log is assigned a Detailed Lithology Group ID of Detlith1 with its own Layer Configuration window Meanwhile if another Detailed Lithology layer is added in a new log creation that will be assigned another Detailed Lithology Group ID Detlith2 Etc Etc Etc Dip Meter Group Button The Dip Meter Group Dip Meter Group button is used when a Dip Meter layer is the currently active layer within the Layer Configuration window The Dip Meter Group button allows you to associate an existing Dip Meter Group to the currently active layer Dip Meter Groups are listed by their Group Name and can be aa OF selected by utilizing the drop box and selecting the according name from the List Then click on the button How to select a different Group to display on a layer 1 Click on the track containing a Multiple Group layer to make the track active Highlighted in Green 2 Click on the Edit pull down menu and select Layer Configuration or click on the E Layer Configuration button on the Toolbar to activate the Layer Configuration window 3 Click on the Data Group ID s Tab 4 Click on the appropriate Group button This will activate a list of all the groups that have been created for this well 5 Select the Group you wish to display on this layer by double clicking on the desired Group Name If selected the Group Name will show in the field below the Group button in the Layer Configuration window 6 C
118. exture Matrix layer active within the Carbonate Texture track by clicking on the track and then selecting the Carbonate Texture Matrix layer from the Layer Selection List field 2 Double click on the Carbonate Texture Matrix layer to expand the Carbonate Texture track and to activate the Carbonate Texture Matrix Builder window 3 Click and drag the mouse pointer from a specific Measured Depth and Carbonate Texture as indicated within the mouse pointer display box to another Measured Depth and Carbonate Texture within an entire Carbonate Texture Matrix interval ina en Foatson Note You can drag the pointer to the left or right of the Carbonate Texture track to more accurately describe your carbonate texture range 4 Release the mouse button and the Carbonate Texture Matrix sub interval will be drawn Carbonate Texture Matrix Builder 5 Del Del 1653 50 to 1660 00 Entire Interval to Sequence Sub lnteryval midst Mudstone ia wkest MWrackestone Sequence W Snap to closest lithology i Dbl Click Interval Entry i Soft Edges 5 If you wish to see a different type of sequence and the user has previously dragged a subinterval right click within the subinterval to be changed and select the Subinterval Sequence selection and select one of the appropriate selections The carbonate texture appearance will be redrawn to reflect the newly selected criteria Delete Sub Delete Entire Entire Interval Sequence
119. found on the log Transfer Annotations Select Annotation Group lithtext1 Add Depth 685 690m Ss lt gy F c gr modly w srt shang sbrdd gtz com micas flks tr fld a 630 695m Ss lt gu F c gr modlo w srt shang sbrdd gtz com micas flks tr fld 695 700m Dok It brn mics ang sly amp aren drs nvhs 635 00m Ss lt gp F c gr modly w srt shang sbrdd gtz com micas fks tr fld FOO 705m Ss lt gp tbr m c gr occ we gr modly w srt sbang sbrdd gtz ce TOS 710m Ss kt gy It bra m c gr modly w srt shang sbrdd gtz com micas T10 715m Ss Ib gy It bm m ve gr modiy w srt shang sbrdd gtz com micas P15 720m Dol It brn micsl ang arer amp sly dns nvhs 15 F20m Ss lt gu lt bm m c gr wart sbang brdd gtz com micas Hke tr fl T20 725m Ss It gy lt gush brn m ve gr modly wart sbrdd gtz cormly micas n 25 rom Ss lt gy lt gush brn m ve gr modly w srt sbrdd gtz cormly micas n fall 735m Ss lt gy t gush brn m c gr w srt shang sbrdd gtz camly micas r Tap 40m Ss lt gy m c gr modly w srk shang sbrdd gtz comle micas mar T40 745m Dol lt brm micsl sly arg alty drs nhs T40 745m Se kt gy m ve gr modly w srt sbang sbrdd gtz comly micas mrr c T45 750m Sa kt ogy m ve gr modly w srt sbang sbrdd gtz comly micas mnr P50 755m Sa lt gy It gy brn m ve gr modly w srt shang shrdd gtz comly mi r55 760 Ss lt gy
120. ghlight the correct corresponding button beside Comma TAB or Space delimiter if shown correctly the Example should read lt column break gt between the data columns If you see this then click on the Finish button to close this window and activate the Dip Meter Data Import window shown on the next page Open Map File o o 4 Inthe upper portion of the window click on the button This will activate an open file window Dip Meter Data Mapping File Look in CNRL Demo x O Jpeg Images Core in Boxes B IPG_Images dip meter mapping dmm File name dip meter mapping dmm Files of type Dip Meter Data Map files dmm G Cancel 5 Select the mapping file with the dmm saved from previous imports of similar dip meter data files to your dip 0 meter table by highlighting the file and clicking on the button or double clicking on the file name Once the file has been opened it will refresh with the current mapping configuration as shown below N B The user can Right click on the Field to remove the mapping 6 The user can map more data columns on the left side of the window by Clicking and dragging the column you wish to import to the field on the right side and release it when the layer becomes highlighted Addendum Manual Version 9 0 page 10 POWER SUITE Addendum User Manual Version 9 0 Dip Meter Data Import Dip Meter Group Bedding Dips 7 Open File Open Map File Save Map File Clear All Mapping Click and
121. gregate grains W alg codi Large Codiacean Algae amp alg codi s Small Codiacean Algae alg lams Algae laminations Matrix E arg argillaceous d bafst Bafflestone lt 8 bent bentonite 4 bits bituminous Cement anhy anhydrite bar barite bits bituminous calcs calcareous Set List Size 34 Clear Al Cancel Clear All eee 2 Click on the _ Clear All ton in the Accessory Favorites list window to prepare it for the selection of your Accessory Favorites 3 Select by clicking on or highlighting some of your more commonly used Accessories from the Accessory Favorites list window OF 4 Click on the button to return to the System Options window 5 Click on the Savel button in the System Options window when you are finished Diagenesis Favorites Button Diagenesis The button when activated allows the user to determine the number of favorites for their favorite Diagenesis list and then displays them in a pop up menu generated by a right click in the Diagenesis layer track along with a tool box when the layer is activated How to Change the Diagenesis Favorites Selection 1 Click on the button in the System Options window to activate the Diagenesis window Diagenesis Favorites Favorite List Selected 20 a calccmt Calcareous Cement calen Calicitization calcnod Calcite Nodule ra cement Cement undifferentiated f chalco pyr cmt Chalcopyrite Cement CH chalcopyrite nod Cha
122. h as Trace Fossils BR are associated with a Rock Type and must have a Rock Type in order to be saved to the database Therefore you cannot add a trace fossil until there is a rock unit or bed interval added to the Interpreted Lithology Layer for that interval 1 Double click on the Trace Fossils track layer to activate the Trace Fossils Selection window The toolbox can be turned on or off by clicking on the _ Toolbox button in the builder Toolbox fx Favorite List Trace Fossil Selection Ar Ar Arenicolites as Abundance Oecasional Tez 110 24 Baa 110 76 i Dbl Click Interval Entry W Snap To Nearest Edit Favorites Toolbox Save 2 Right click anywhere on the Trace Fossils track layer to activate the pop up menu Abundance gt Delete Ar Arenicolites As Asterosoma C Cruziana G Gyrolithes Edit Options gt i Nafoliss o P S T z Exit Ophiomorpha Planolites Skolithos e Teichichnus Zoophycos 3 Click on Trace Fossils selection to activate the pop out menu and then select from the pop out favorites list or click in the builder drop down menu selections to access the list provided in them Either way once you have selected one it will be populated in the builder 4 Click on the Abundance selection to activate the pop out menu and then select from the pop out list or click in the builders drop down menu selections to access the list provided in them Either way once you have se
123. h the top or bottom with a drag Double Click Interval Entry W DBI Click Interval Entry When checked will allow the user to enter a Grain size over an entire interval with a double click on the left mouse button Soft Edges Soft Edges When checked will round off the grain sizes and will present the grain size edges with sine wave lines instead of strain lines If the user has the Grain Size Matrix layer added to the Grain Size track the user should verify that the Litholagy Profile check box is not activated To do so click on System Options under the Options menu selection and deactivate this check box Click on the ae button Note If the Grain Size track contains two headings that overlap click on Layer Configuration under the Options menu selection and uncheck the Display Layer Name or Curve Scale on Track check box l Then click on the button How to Change the Grain Size Display from a Solid Color to a Hatching Pattern on your log This can only be represented with the Lithology Profile deactivated Litholagy Profle in the System Options Display Tab dialogue window This will also change all the grain size and matrix layers on all logs 1 Click on System Options selection under the Options menu selection This will activate the System Options tab dialogue window 2 Click on the Display Tab Grain Size Fill Pattern 7f Horizontal hatch Vertical hatch 3 Then select the grain size pattern Upward h
124. he Import Toolbar This will activate the Open MDT Data file window as shown below Open MDT Data File Look in G9 CNRL Demo X fe ce E IO Jpeg Images Core in Boxes ti core labs mapping file cdm 8 norwest mappi D JPG_Images E dip meter data txt E survey for Vict la cnrl mapping cvm E dip meter mapping dmm A CNRL las BL core lab data csv BL Norwest lab data csv Ei Core lab data xls EP Norwest lab data xls lt gt File name IMDTDATA2csv tt ti i s Files of type All Files v Cancel 2 Select the file from the folder or drive with the corresponding navigational tools provided and either double Open click on the file name or click once and click on the button This will activate the Set delimiter window as shown below N B The one on the left the delimiter is set correctly the one on the right the delimiter is set incorrectly Set Delimiter Set Delimiter Comma TAB C Space C Comma C TAB Space Example Example seq lt column break gt md lt column break gt tvd lt column break gt ssl lt column break gt hp before lt c seq md tyd ssl hp lt column break gt before hp lt column break gt afterfp efw temp mob formatic lt gt lt gt Correct 3 Not Correct Highlight the correct corresponding button beside Comma TAB or Space delimiter if shown correctly the Example should read lt column break gt between the data columns If you see this then click on the Finish Frish button to
125. he Log Scale back to the default of 1 240 When the scale is changed back to 1 240 the descriptions transferred will be turned off by default Refer to Annotation builder display scale to see how to manage these annotations Transferring Multiple Core Descriptions Us 1 Click on Sample Core Description Transfer under the Options menu selection or click on the k Sample Core Description Transfer button on the Toolbar to activate the Sample Core Description Transfer window which will then display the last description entered into the current well Sample Core Description Transfer fx Undo Nest Last List 1000 to 1003 5 Sh mnt s lam s Sh is predly dk gy micmica carb sils fis Ss lam are thn lt 3mm and are predly lt gy f c gr occly vf gr py ert bang sbrdd gtz com micas ks mnr fd abnt sils cmt com cly amp pyric mts predle disagad predly tt rs Selections for Multiple Description Transfer Uncheck for Mult Transter From 11000 to 02 L C Single Transfer W Core Section W Tranter Depth Range Transher W Transfer Short Form Top Depth Only Then click on the From button to select the starting depth of the first interval that you wish to transfer to Click on the to button and select the starting depth of the last interval to be transferred Deactivate the Single Transfer check box Ll Activate the Core Section check box to ensure that the disp
126. he Rock Accessory Builder window and the Accessory Favorites List Toolbox Rock Accessory Builder Rock T ype Thinbed ma Component alg nn dese Algae non descript Matrix Cement Contact Edit Favorites Toolbox 4 Select an Accessory There are 3 ways to select an accessory some faster than others e The user can click on the desired Accessory Symbol from the Favorites Toolbox e The user can right click anywhere within the Interpretive Lithology track to activate the pop out menu Then select accessories to initiate the favorite s list pop out menu and click on the desired Accessory Symbol from the pop out menu e The user can select an Accessory Symbol from the appropriate Accessory Type fields within the Accessory Type Builder window if the desired Accessory Type is not displayed in the favorite s list pop up menu or Toolbox Addendum Manual Version 9 0 page 102 POWERXSUITE Addendum User Manual Version 9 0 Argillaceous Argillaceous Calcareous Calcareous Carbonaceous Accessories gt Contact gt Delete Rock Builder gt 5S HERE Edit Opti gt ita ad Chert dark Exit a Clay Coal Crptocrystalline Earthy Fish Remains Fossil Glauconitic Intraclast Lithic grain Limestone mud supported Micromicaceous Microcrystalline Mineral crystals Minerals dark Plant remains Pyritic Sandy Shale gray Sideritic Siliceous Siltstone Silty Sandstone Stylolitic a
127. he keyboard to exit from the Carbonate Texture Builder window Adding a Sub Interval 1 Double click on the Carbonate Texture layer to expand the Carbonate Texture track and to activate the Carbonate Texture Builder window 2 Click and drag the mouse pointer from a specific Measured Depth and Carbonate Texture as indicated within the mouse pointer display box to another Measured Depth and Carbonate Texture within an entire Carbonate Texture interval Note You can drag the pointer to the left or right of the Grain Size track to more accurately describe your grain size range 3 Release the mouse button and the Carbonate Texture sub interval will be drawn Carbonate Texture Builder Del 1707 50 to 1712 50 Entire Interval ta Sequence na Sub lnteryval pkst Packstone ka grst Grainstone Sequence W Snap to closest lithology W Dbl Click Interval Entry i Soft Edges 4 If you wish to see a different type of sequence and the user has previously dragged a subinterval right click within the subinterval to be changed and select the Subinterval Sequence selection and select one of the appropriate selections The grain size appearance will be redrawn to reflect the newly selected criteria Delete Sub Delete Entire Entire Interval Sequence SubInterval Sequence Fining Upwards w Soft Edge Coarsening Upwards Hard Edge Blocky Edit Options Exit 5 Press the Esc key on the keyboa
128. how to transfer Core Descriptions to a log see the Transferring Core Descriptions section in Chapter Five of the User Manual Addendum Manual Version 9 0 page 44 POWERXSUITE Addendum User Manual Version 9 0 Bit Record Bit Record data is entered into this window The data entered into this window is used to generate three separate Well End Reports the Bit Records report the Bit Record Summary IADC report and the Bit Record Summary TBG report The Bit Record Summary IADC report is made up of select fields of data including Bit Make Type Size Depth In Depth Out Drilled Rotating Hours Average Drill Rate and the IADC Bit Grading System fields The Bit Record Summary TBG report is made up of the same fields of data however it also includes the Size and TBG Grading System fields When entering this data into the Bit Record window you can save time by filling in only the information required for the Bit Record and Bit Record Summary reports as well as the information that is displayed on the Bit Record layer on the log Note The Pump Data tab section of the Bit Record window only needs to be filled in once per well The only information required for each additional Bit Record is the Pump SPM Efficiency and Pump Output l min Bit Records and Related Data Bit Records Pump Data Drilling Parameters Bit Grading Save Undo New Del Next Last 400 Bi fT Series Type 4 3
129. id M l A This field will change the color of individual items with a fill pattern such as Grain Size Carbonate Texture and Porosity Grade and MDT Data Layers Depth Offset Correlational Module only This field allows you to offset a layer by typing the depth you want to offset the layer by into the Depth Offset field Note A positive number will move the layer DOWN the striplog while a negative number will move the layer UP the striplog Display Scale Placements Eyer 50 Start at E The Every Field indicates the frequency at either 1 240 or 5 at which the curve scale will be indicated for that curve layer on the log If all curve layers on a track have this same frequency and start depth they will be staggered according to the scales on the track header for that track The Start At field indicates where the first scale for the curve will be placed and then it will add whatever is in the Every field and place the curve scale for that curve on the layer There will be no curve scale it there is no data over that particular interval on the log Example Every field 50 Start at field 250 You will have a scale placed on the log for that curve layer at 250 300 350 400 etc Note If the Start at and Every fields are Blank the default for the scale placement will be at the top of the screen or the top of every printed page But they will only show if the Curve layer is the active layer on the track at the time of p
130. ies such as Grain Size are associated with a Rock Type and must have a Rock Type in order to be saved to the database Therefore you cannot add an entire interval or sub interval of Grain Size until there is a rock unit or bed interval added to the Interpreted Lithology Layer for that interval 1 Double click on the Grain Size layer to expand the Grain Size track and to activate the Grain Size Builder window shown below Grain Size Builder Del Size Sequence Cr Entire Interval 1452 50 to 1460 00 cst coarse sit Sub lnterval Size Sequence Gan if Snap to closest lithology ge W Dbl Click Interval Eritry W Soft Edges 2 Click and drag the mouse pointer from a specific Measured Depth and Grain Size as indicated within the mouse pointer display box to another Measured Depth and Grain Size e g 1209 60 c snd to 1204 00 m snd on the Grain Size track 3 Release the mouse button and the entire Grain Size interval will be drawn accordingly Note If you want to fill in the entire interval with only one grain size and not a range of grain sizes and you have the Ww Dbl Click Interval Ent Selected in the builder simply double click in the interval the grain size you wish to enter and it will fill in the entire interval with your selection 4 If you wish to see a different type of sequence and the user has previously dragged the entire interval right click within the interval to be changed and select th
131. ified in the transfer Options discussed below The Transfer to Annotation Group selection drop box indicates which group the description is being transferred to This window will default to Lithtext1 If this is not the group you wish to transfer you descriptions to select a different group from this drop box Note The first log created for a well will have a lithology description layer identified with a group called lithtext1 the second log created for a well will have a lithology description layer identified with a group called lithtext2 etc The user can select any annotation group that exists for that well Addendum Manual Version 9 0 page 42 POWERXSUITE Addendum User Manual Version 9 0 The Transfer Depth Range check box when activated will transfer the from and to depth interval to the log The Transfer Top Depth Only check box when activated will transfer only the from depth interval to the log The Transfer Short Form check box when activated will transfer the short description to the log When this selection is unchecked the samples long sample description will be transferred to the log Adding a Core Description 1 2 Click on Core under the Reports menu selection to activate the Well Core window The user must fill in the Mandatory fields in the core window and save this record before you can click on Core Description Button in the Well Core window If any descriptions have been entered for the current well the last
132. in Size as indicated within the mouse pointer display box to another Measured Depth and Grain Size within an entire Grain Size interval Note You can drag the pointer to the left or right of the Grain Size track to more accurately describe your grain size range 3 Release the mouse button and the Grain Size sub interval will be drawn accordingly Grain Size Builder Del Size Sequence E Entire Interval 1452 50 to 1460 00 o sub Interval Size Sequence Gan o W Snap to closest lithology c alt coarse silt to jvband very fine sand i Dbl Click Interval Entry W Soft Edges 4 If you wish to see a different type of sequence and the user has previously dragged a subinterval right click within the subinterval to be changed and select the Subinterval Sequence selection and select one of the appropriate selections The grain size appearance will be redrawn to reflect the newly selected criteria Delete Sub Delete Entire SubInterval Sequence i Fining Upwards Entire Interval Sequence Coarsening Upwards Soft Edge Blocky Hard Edge 4 Edit Options Exit 5 Repeat Steps 2 4 to add more Grain Size sub intervals to the Grain Size track 6 Press the Esc key on the keyboard to exit from the Grain Size Builder window Deleting a Sub Interval 1 Double click on the Grain Size layer to expand the Grain Size track and to activate the Grain Size Builder window 2 On the Grain Size layer right click anywhere
133. ine the lithology interval Addendum Manual Version 9 0 page 98 POWERXSUITE Addendum User Manual Version 9 0 ok PP aS Se eh Release the mouse button and the interval will be drawn accordingly Right Click on the drawn lithology and select Interbedding from the pop out menu as shown below or Click on the lithology and Click on the _Interbeds button in the Rock Type Builder This will activate the Interbed window also shown below Interbedding Accessory Rock Type Main Lithology oF N md brec mud breccia Grain Size ve snd ver coarse sand to Ic pbl coarse pebbles Coarsening Upwards i Finning Upwards Carbonate Texture to Coarsening Upwards Finning Upwards Secondary Lithology Interbed Rocks CS SsBandstone O Base Contact P Gran Size ivf snd very fine sand ha li snd fine sand Save Carbonate Texture bed to Delete Acc Builder Top Interbed 30 Base Interbed 50 Inkerbedding ee Bedding Thickness Edit Options Decimster DM Exit Save DEL Select the Main Lithology Grain Size or Carbonate Texture from and to from their respective drop boxes If the Grain Size or Carbonate Texture is already filled in you can change it here or leave it as is In the Main Lithology section select Coarsening or Fining Upwards check boxes if you wish Select the Secondary Lithology Interbed from the drop box Fill in the Secondary Lithology
134. inent to an entire rock unit or bed An entire interval cannot be added until a bed exists Sub interval A sub interval can be of any thickness less than the entire rock unit or bed and can rest within an entire interval or can stand alone as a sub interval without being part of an entire interval You can have as many sub intervals as you wish If you enter a sub interval equal to the rock unit or bed the sub interval will become an entire interval Snap to Closest Lithology W Snap to closest thology When checked allows the user to find the top or bottom of an interval easily with the mouse pointer as you have to be within 10 times the mouse pointer or screen accuracy of the interval to catch the top or bottom with a drag Double Click Interval Entry Dol Click Interval Entry When checked will allow the user to enter a Grain size over an entire interval with a double click on the left mouse button Soft Edges soft Edges When checked will round off the grain sizes and will present the grain size edges with sine wave lines instead of strain lines Grain Size No Pattern Hard edges Grain Size Pattern Soft edges How to Change the Grain Size Scale Type Wentworth Canstrat or Amstrat 1 Click on System Options selection under the Options menu selection This will activate the System Options tab dialogue window 2 Click on the Display Tab Grain Size Scale Wentworth z Amstrat ok 3 Then select the corresponding Wentworth from
135. ing report information We have added a Multi Array Curve layer to display the logging tool information that have multiple channels such as induction and sonic tools We have added an LAS Unwrap Utility which will remake a wrapped LAS file and make it into an unwrapped file which then Power Suite can then import utilizing the LAS import utility We have added a retro look soft or hard edges to Porosity Grade Grain size Grain size Matrix Carbonate texture Carbonate texture Matrix and Generic Percent tracks to give the log a look very similar to the way it appeared when the Lithology logs were hand drafted System Options Window We have added the ability to Change the Depth Font style and orientation in the track as well as the default Annotation Font Type size and style We have also reordered the System options into a tab dialogue window so that the choices are more easily found The grain size and carbonate texture fill pattern can now be modified with a pattern and a foreground and background color elections We have added the ability to print the track header for a striplog on both the top and bottom of a log to more resemble the wire line log output The bottom footer prints out the last scale applicable for the curves being drawn We have also added a new abbreviated title page for Sample Logs to go along with our normal Sitriplog and Corelog Header We have made it much simpler to add sample descriptions to the morning report and we
136. ioturbations Remember you have to be within 10 times of the mouse pointer or screen accuracy from the previous symbol to have the snap to take effect Note Regardless of the thickness of the interval that you have added to the log at least one symbol will be drawn in the middle of the interval Tip The frequency of symbols if not utilizing the arrows subintervals at any given scale is handled in the Systems Options window under Options If you have selected 1 symbol every 2m at the 1 240 scale you will get 1 symbol every 1m at the 1 120 scale 1 symbol every 4m at the 1 480 scale and so on 8 Repeat Steps 3 5 to add more degrees of Bioturbation to the track Note There are two ways how abundance can be shown If in the System Options window you have checked W Arowed Subintervals option each interval will be displayed with a different line style which specifies the abundance you have selected E g if occasional an interval arrow will be displayed as a dashed line while if abundant an interval arrow will be displayed as a thick solid line Otherwise all symbols within an interval will be displayed in the certain color which specifies the abundance you have selected E g if occasional symbols will be blue on the other hand if abundant symbols will be red 9 Press the Esc key on the keyboard to exit from the Bioturbation Builder window Resizing an Interval 4 Double click on the Bioturbation track layer to activate th
137. is shown below Addendum Manual Version 9 0 page 24 POWERXSUITE Addendum User Manual Version 9 0 Active Layer Configuration Drill Rate Layer Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions Savel Undo Data Type tame UREE Dwl i Display Layer Name or Curve Scale on Track Foreground Color black r Show L Track OW Laver on Irac Depth Offset Pe Display Vertical Orientation Layer Name lt 4 Display Scale Placements Display Backup scales i 50 i 0 Display scales on non active layers Every start at Display Full Logarithmic Scale Display Depth Asis Grid Display Data 4sis Grid fa x Once a field in this Layer Configuration Tab dialogue window has been changed the user must then click on the Savel button or press ALT S The Mame Milih field in yellow is a mandatory field This is the name that is displayed for a layer or a curve irregardless of the Curve you have identified to show on this layer within the Curve Definition Tab of this dialogue window W Display Layer Name or Curve Scale on Track If this box is checked default indicates that the Curve Scale or Layer heading will be displayed in the track header W Show Layer on Track If this box is checked default indicates that the layer is being displayed W Display Vertical Orientation Layer Name If this box is checked indicates that
138. isplay your directional surveys on your log in Directional 5 display e A a maa either Quadrant format N 62 2 W or Azimuth format AZ 298 9 Azimuth Ww Sidewall Core Run and Core No This check box when activated will display the Sidewall Core Run numbers above the core triangle indicator on the Sidewall Core layer Addendum Manual Version 9 0 page 78 POWERXSUITE Addendum User Manual Version 9 0 Favorites Tab This tab allows the user to define their System favorites for all the data categories that support these choices This tab dialogue also allows the user to access the Lithology Sort order for the Lithology Track System Options General Fonts Display Favorites Rock Favorites Lithology Sort Order Fractures Favorites Aoc Favorites Sedimentary Favorites Trace Fossil Favorites Diagenesis Favorites Rock Favorites The Flack Favorites button when activated allows the user to determine the number of the activation of the Rock Type Builder window in the Interpreted and Detailed Lithology tracks How to Change the Rock Favorites Selection 4 l Rock Favorit i 1 Click on the Flack Favorites button in the System Options window to activate the Rock Type Favorites window Rock Type Favorites Favorite List Selected 20 KEE ihsick ihs rock Ls gs Limestone grain supported Ls ms Limestone mud supported md brec mud breccia Bete ees dst Mudstone Meta Met
139. isplayed accordingly on the Strip Log Title Page only g Legend Activate this check box If you wish to have our entire legend printed out 9 Use Dynamic Legend Activate this check box If you wish to have the legend reflect only the symbols printed on the log or core portions of the printed intervals defined in the log and core portions of the print log window In the Log portion of the Print Log window 10 bog scale 240 E Select or type in the Scale for the main log to be printed out at in the Scale drop box field 14 M Header Activate this check box M to have the track headers printed out with the main log 12 IV Footer Activate this check box to have the track footers printed out with the main log 13 Core Accessories Activate this check box to have the core accessories printed out on the main log 14 Highlight the main log printing options in the selection box The user can select either None User defined Interval requires that you Today Section 234 00 to 345 00 manually enter the desired print interval depths Today Section Well Section 200 00 to 1600 001 H Lithalnann Serhan 16A RAN ia 1694 RNI k Well Section or Lithology Section User defined Interval 200 to i B00 None User defined Interval Note Today Section interval is derived from the From and To Depth values entered into the Today s Section portion of the Power Log Data Transfer Export window The Well Section i
140. it Records and Related Data Bit Recorde Pump Data Drilling Parameters Bit Grading Save Und New Del aa E 1 H2 Model 22 P354 Size 700 300 Type triplex triplex P Rod Diam mm 1200 300 Liner Size mm 245 a5 O Stroke Len mm 123 234 SPM 20 30 Efficiency zt 195 105 Output l min 13 6 15 o Cancel Help 1 Click on the Pump Data Tab 2 Tab through the fields and type the appropriate information in each field 3 When you have finished adding your data Click on the ate button or press ALT S and then click on the appropriate button out of the ensuing Shortcut Options window Addendum Manual Version 9 0 page 46 POWER SUITE Addendum User Manual Version 9 0 Drilling Parameters Tab The only Bit Record Report that utilizes this information is the Full Bit Record Report The TBG and IADC do not utilize any of this information Bit Records and Related Data Bit Records Pump Data Drilling Parameters Bit Grading Savel Undd New Del Fret Prev 2 Next Last ki animum Formations Drilled F O 8 daN 4000 Sephton Roemer Carbonate R P M 100 120 5 P P kPa Mud Den kerr m Annular Velocity m min DC HWoOP ODP Funnel Wis zec 5 20 hs Dritt Angle Bottoms Up mir Depth Theoretical Actual 135 4 6 Cancel Help 1 Click on the Drilling Parameters Tab 2 Tab through the fields and type the appropriate information in each field 3 When yo
141. lay scale for the Core Descriptions is set at 1 120 This will ensure that all of the Core Descriptions will be seen on the log at a Log Scale of 1 120 while avoiding any possibility of overlapping with the Sample Descriptions being displayed at the standard Log Scale of 1 240 6 Click on a spot within the active Lithology Description layer where you want the Core Descriptions to be placed and the following system message will be activated Do you really want to transfer sample core text between _ and _ to the log starting at_ ae P Y 7 If the depths outlined in the system message are correct then click on the button and the following system message will be activated Transferring Core Descriptions Do you wish to change screen scale to 1 120 so you can see the core descriptions l Y a 8 Click onthe button to proceed with the multiple Core Description transfer with the transfer options selected Addendum Manual Version 9 0 page 70 POWERXSSUITE Addendum User Manual Version 9 0 Note The depth difference between the position of the first description and the actual start depth interval of the first description will remain constant for the entire range of your current transfer If there are multiple descriptions for one interval they will be placed on the log in descending order of percentage one meter apart These can be edited later in the Annotation window 9 Press the Esc key on the keyboard to exit fro
142. lcopyrite Nodules eg chicken wire Chicken wire Structure chtdkemt Chert dark Cement chtdknod Chert dark Nodule G chtfonod Chert Fossiliferous Nodule A chtltemt Chert light Cement amp chtltnod Chert light Nodule chtycnod Chert varicolored Nodule oR comp pel fab Compressed Peloidal Fabric v Clear All Cancel Set List Size 20 Addendum Manual Version 9 0 page 80 POWERXSUITE Addendum User Manual Version 9 0 a Se fy i Clear All l ae Click on the Ceara button in the Diagenesis Favorites list window to prepare it for the selection of your Diagenesis Favorites Select by clicking on or highlighting some of your more commonly used Diagenesis from the list window Click on the a button to return to the System Options window Click on the Savel button in the System Options window when you are finished i Lithology Sort Order Button OE ae This button activates a window that does the ordering of the Lithology layer The rock types listed in this window is the sort order from left to right in Power Log and top to bottom in Power Curve when the Lithology Track Layer is utilized The sort order can be changed by the user at any time but will only take effect after the application has been reactivated The Lithology Sort Order Window is shown on the next page How to Change the Lithology Sort Order Lithology Sort Order Rock Type List z Cht veol g Cht tripic As
143. lds will become red Da Type in either a depth value or rock type where you want to start a query from and click on the Start Addendum Manual Version 9 0 page 69 POWER SUITE Addendum User Manual Version 9 0 Query button This will refresh the window with all the records starting from the depth value or rock type that you have just entered Then use the database navigational tools to navigate through the records cLish 4 OR Click on the amp d button within the Sample Core Description Transfer window to activate the Sample Core Description List window Then double click on the desired description within the Sample Core Description List window in order to display it in the Sample Core Description Transfer window 5 When the desired Core Description for transfer is displayed within the Sample Core Description Transfer window activate the Core Section check box 6 Next select a spot on the active Lithology Description layer on the Lithology Description track where you want the Core Description to be placed 7 Click on a spot and the following system message will be activated Transferring Core Descriptions Do you wish to change screen scale to 1 120 so you can see the core descriptions i 8 Click on the button to proceed with the transfer of the Core Description 9 Press the Esc key on the keyboard to exit from the Sample Core Description Transfer window Note You may now wish to change t
144. lected one it will be populated in the builder Trace Fossils gt Delete Trace Occasional Common Exit Abundant Edit Options gt 5 Click and drag the mouse on the track layer over the desired interval Or If you just click your mouse on the track layer This will insert a subinterval of whatever was selected in step 3 and will be added to the layer track at the depth you clicked at The interval size is defaulted to the screen scale accuracy setting The sedimentary structure interval will be drawn accordingly Addendum Manual Version 9 0 page 128 POWERXSUITE Addendum User Manual Version 9 0 6 Double Click within an existing rock type interval in the Trace Fossil layer with the W Dbl Click Interval Eritry activated and the entire interval will be filled in with the attributes that have been entered into the Trace Fossil window 7 Click and drag the mouse on the track layer close to an existing trace fossil either above or below in the same column with the Ww Snap To Nearest activated and there will be no spaces between the sedimentary structures Remember you have to be within 10 times of the mouse pointer or screen accuracy from the previous symbol to have the snap to take effect Note Regardless of the thickness of the interval that you have added to the log at least one symbol will be drawn in the middle of the interval Tip The frequency of symbols if not utilizing the arrows subintervals at any given s
145. lick on the Savel button or press ALT S when you are finished 7 A system message will appear telling the user Record saved successfully Do you wish to Exit Click on Y the button to exit the window and view your changes Formation Age Display Tab This tab in the layer configuration window allows the user to change the display of the Formation in either the Long Short or Extended as well as the Ages layers Addendum Manual Version 9 0 page 32 POWERXSUITE Addendum User Manual Version 9 0 Active Layer Configuration Formations Expanded Layer Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions Ess Je Formation Display Age Display Formation Long Name Display on Layer Format 2 Group lene Formation Short Name Display on Layer Format 1 V Formation Period Format V Member Stage V Display attop Display at top Cancel Help Once a field in this Layer Configuration Tab dialogue window has been changed the user must then click on the 5 ads button or press ALT S Formation Display This portion of the window is only applicable to the Expanded Formation Track Layer that displays the Group Formation and Member information that is entered into the Formation Report Group This track can be divided into as many as 3 portions If this box is checked indicates that the Group information will be displayed on the Formation Tra
146. limit of the hole was reached at a measured depth of 664m MD or S80 2m TYO where we encountered a significant increase in w Conclusion To Long Desc The Main Tidsdale Sandstone was drilled horizontally for 525m and encountered at least a minimum of 290m of good oll pay zones These zones should and will produce oil at a significant rate The porosity overall ig quite good and there was no indication of water during any of the drilling of the drain section of this well This is a zone of much importance and should be further evaluated on downhole logs Adding a Formation Top 1 2 Click on Formation under the Reports menu selection Hew Click on the button or press ALT N and then fill in the report window with your data When you have finished adding your data click on the button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Editing a Formation Top Formation Click on the button to view a list of Formations to date and then double click on the record that you wish to edit a First P Y Next Last Or use the Database Navigational Tools gil es aid Pt to navigate through the records See the Database Navigational Tools section later in this User Manual for more information Addendum Manual Version 9 0 page 51 POWER SUITE Addendum User Manual Version 9 0 3 Once the selected interval is displayed in the Formation window make any changes
147. ll turn into a resize cursor J 3 Click and drag the mouse to the new desired top or bottom depth Release the mouse button and the interval will be resized Keypad Method 3 Click once on the Rock Accessory Symbol you want to resize to bring it into the builder and change the from or to depth and or abundance and click on the o Sme button Remember if it is a bed restricted layer that the top or bottom of the Lithology interval will take precedent Moving an Interval 1 Double click on the Rock Accessory track layer to activate the Rock Accessory Symbols window 2 Move the mouse pointer over the interval to be moved Click and drag the interval to a new position The bed restricted interval will not be allowed to move outside the interval of the lithology it is associated with Deleting a single Interval 1 Double click on the Rock Accessory track layer to activate the Rock Accessory Symbols window Rock Accessory Builder Thinbed E anhy prim pebbles anhydrite primar pebbles Component Matrix Cement bi Abundance Dccasional x if Dbl Click Interval Entry 110 62 111 22 Top Base W Snap To Nearest Edit Favorites Toolbox cave 2 Right click anywhere within the interval you wish to delete to activate the pop up menu Rock Accessories gt Abundance gt Edit Options gt Exit 3 Click on Delete and the Rock Accessory interval will be deleted accordingly 4 Repeat Steps 2
148. m the Sample Core Description Transfer window when you are finished Note You may now wish to change the Log Scale back to the default of 1 240 When the scale is changed back to 1 240 the descriptions transferred will be turned off by default Refer to Annotation builder display scale to see how to manage these annotations Addendum Manual Version 9 0 page 71 POWER SUITE Addendum User Manual Version 9 0 Unwrap LAS Options pull down menu Item The LAS import module does not allow the user to be able to import wrapped LAS file formats The wireline logging companies sometimes wrap their files so that they can be printed on an 8 5 x 11 sheet of paper but does not lend itself to pure columnar data The user can now unwrap these wrapped LAS files using this utility How to unwrap a wrapped LAS file format 1 Click on the Unwrap LAS selection under the Options menu selection This will activate the LAS Unwrap Utility LAS Unwrap Utility Choose File Unwrap File Choose LAS file Save in O LAS Wrapped files hd 3 12 16 81 11M5nw las DEGES 3 12 16 81 11RSnw las 3 12 16 81 11Rw las a uw_12 16 61 11Mw las Fie name 12 16 8111Mw las 0 Ea Save as type LAS files las Cancel 3 Find the wrapped LAS file in question through the regular file finding tools and highlight the file and click on the Save button This will populate the Unwrap utility with the file to be unwrapped Unwrap File
149. ment Edit Options j Exit 3 Select IN Alignment from the pop up menu to activate a pop out menu and select Left Right or Center to align the bit in records accordingly IN Alignment F Left QUT ligament Fight Center Edit Options a Exit 4 Select OUT Alignment from the pop up menu to activate a pop out menu and select Left Right or Center to align the bit out records accordingly IN Alignment j OUT Alignment Left Right Edit Opti b ili a Center Exit Field Restriction Table Addendum Manual Version 9 0 page 48 POWERXSUITE Addendum User Manual Version 9 0 Drilled Calculated S o S FOBMin EO Numere Optional FOB Max TO Numeric Optional PRPMMin EO Numeric Optional RPM Max LO Numeric Optional SPPMin Numeric Optional SPP Max TO Numeric Optional Mud Density Min 60 Numeric Optional Mud Density Max 60 Numeric Optional Funnel VisMin 60 Numeric Optional Funnel Vis Max 6 Numeric Optional _TBGGage Numeric Optional Pump Rod Di 18 amp 2 60 Numeric Optional Liner Size 182 _ 60 Numeric Optional Stroke Length 1 amp 2 60 Numeric Optional PSPM 1 amp 2 0 Numeric Optional _ Annular VelDC LO Numeric Optional Annular Vel HWDP __ 60 Numeric Optional Annular VelIDP_ TO Numeric Optional Bottoms Up Theor 60 Numeric Optional Bottoms Up Actual LO Numeric Optional IADC Gage Numeric Optional
150. moderately MWe Hioturbated moderately well 4 Bioturbated slightly Exit Bioturbated well 4 Click on the Abundance selection to activate the pop out menu and then select from the pop out list or click in the builders drop down menu selections to access the list provided in them Either way once you have selected one it will be populated in the builder Bioturbations gt Delete Trace Edit Options Occasional Edit Options gt Common Exit Abundant 5 Click and drag the mouse on the track layer over the desired interval Or If you just click your mouse on the track layer This will insert a subinterval of whatever was selected in step 3 with the abundance that has been selected in step 4 and will be added to the layer track at the depth you clicked at The interval size is defaulted to the screen scale accuracy setting The bioturbation interval will be drawn accordingly 6 Double Click within an existing rock type interval in the Bioturbation layer with the Dbl Click Interval Entry activated and the entire interval will be filled in with the attributes that have been entered into the Bioturbation window 7 Click and drag the mouse on the track layer close to an existing Bioturbation Symbol either above or W Snap To Nearest below in the same column with the activated and there will be no spaces between the Addendum Manual Version 9 0 page 125 POWERSSUITE Addendum User Manual Version 9 0 b
151. n CNAL Demo v f c E Jpeg Images Core in Boxes Ti core labs mapping file cdm Ai norwest mappi IO JPG_Images E dip meter data txt E survey for vict a cnrl mapping cvm E dip meter mapping dmm A CNRL las E MDTDATA2 csv ES Core lab data csv BL Norwest lab data csv a Core lab data xls EH Norwest lab data xls lt gt Filename MDTDATA2 csv Files of type All Files v Cancel 2 Select the file from the folder or drive with the corresponding navigational tools provided and either double Open click on the file name or click once and click on the button This will activate the Set delimiter window as shown below N B The one on the left the delimiter is set correctly the one on the right the delimiter is set incorrectly Set Delimiter Set Delimiter Comma C TAB C Space C Comma C TAB Space Example Example seq md tyd ssl hp lt column break gt before hp lt column break gt after fp efw temp mob formatic seq lt column break gt md lt column break gt tyd lt column break gt ssi lt column break gt hp before lt c lt i lt Not Correct Correct 3 Highlight the correct corresponding button beside Comma TAB or Space delimiter if shown correctly the Example should read lt column break gt between the data columns If you see this then click on the Finish button to close this window and activate the MDT Data Import window shown on the next page Addendum Manu
152. n the Trace Fossil you want to resize to bring it into the builder and change the from or to depth and or abundance and click on the Sae button Remember if it is a bed restricted layer that the top or bottom of the Lithology interval will take precedent Moving an Interval 1 Double click on the Trace Fossils track layer to activate the Trace Fossils selection window 2 Move the mouse pointer over the interval to be moved Click and drag the interval to a new position The bed restricted interval will not be allowed to move outside the interval of the lithology it is associated with Deleting a Single Interval 1 Double click on the Trace Fossils track layer to activate the Trace Fossils Selection window Trace Fossil Selection Ar Ar Arenicolites Abundance Occasional X Top 110 24 eens 110 76 V Dbl Click Interval Entry V Snap To Nearest Edit Favorites Toolbox Save 2 Right click anywhere within the interval you wish to delete to activate the pop up menu Trace Fossils gt Abundance gt Edit Options gt Exit Addendum Manual Version 9 0 page 129 POWER SSUITE Addendum User Manual Version 9 0 3 Click on Delete and the Trace Fossil interval will be deleted accordingly 4 Repeat Steps 2 and 3 to delete more Trace Fossil intervals from the Trace Fossils track layer 5 Press the Esc key on the keyboard to exit from the Trace Fossils Builder window Deleting Multiple Intervals 1
153. nd side of the Log configuration window click on the Depth Track In this example we will be adding the Percent track to the left of the Depth track or above the Depth track in the horizontal application The track will become highlighted and the Tracks radio button Tracks will become activated Add gt gt gt 4 Inthe middle of the Log configuration window click on the button This will activate a System Message asking the user Do you really want to ADD the selected TRACK from the available log to the active log 5 Click on the ue button This will activate a Get Name window allowing the user to name the track Mee Track Hame Pecani Sica 6 Type ina percent name and then click on the ok button The track will be added above the Depth Track or to the left on the log and the Log Configuration Builder window will be shown Track Widths 1199 Los width 11212 O Lyen Layer Contig Percert Sac 100141301 223W 7 Click on the button This will activate the Log and the new track will be added to your log Drawing Percents 1 Double click on the Percent track to activate the Percent Layer window Addendum Manual Version 9 0 page 135 POWER SSUITE Addendum User Manual Version 9 0 Basic colors fm ioe fis ingot fon fo fet et ia ft ESE eT ET TT Back Color BREE EHE EH Gradient Custom colors O ME TETIT e TT CeCe a If Soft Edges The default is a black histogram The user has the ability to modify
154. ndow or Select the Edit Curve selection 4 Click on the Curve Definitions Tab 5 Click on the Edit Curve Attributes button This will activate Digital Curve window Digital Curve Save Undo New Del Next Last Scale Name DillRate Units min m x Depth Units Ej Null Value Remark Addendum Manual Version 9 0 page 28 POWERXSUITE Addendum User Manual Version 9 0 6 The Default Curve name will be the one in the Layer Window but the user can access any curve associate with the active well The user can click on the uli button to see a list of the curves associated with the primary well 7 You can now rename or type in new units change the null value or add change the remarks S eas 8 Click on the button or press ALT S The user can also change the curve scales by clicking on the Curve Scales button and editing the curve scales here and then click on the appropriate button when prompted with the Shortcut Options system window Layer Scales Tab This tab in the layer configuration window allows the user to change the scale on non curve layers as well as curve or layer attributes that utilize grid attributes for each individual layer The six data layer types that would utilize this tab would be all curves Grain Size Carbonate texture Porosity Grade Percent and Dip meter layers An example of a grain size layer is shown below Active Layer Configuration Grain Size Layer Di
155. ndum Manual Version 9 0 page 13 POWER SUITE Addendum User Manual Version 9 0 Importing Mapping of MDT data An MDT Layer should already have been added through the Log configuration builder so that an MDT group exists in the database to be able to import MDT data 1 On the left side of the window Click and drag the data column you wish to import to the corresponding table field on the right side and release it when the field becomes highlighted If mapped the field HE will turn green on the right and red on the left N B The user can Right click on the Field to remove the mapping 2 Repeat the Clicking and Dragging of data columns to fields until all the columns that you want have been mapped MDT Data Import MDT Run Open File Open Map File Save Map File Clear All Mapping Click and Drag with the Left Mouse button Drag the columns of the data file over to the corresponding field Data Column Mapped Column W Seq No Column 1 v hy Column 2 2E Measured Depth Column 2 ABE Column 3 BE TVD Depth Column 3 MIRE Column 4 BE SSL Depth Column 4 s he Column 5 Ree Hydro Prs Before Column 5 BE Column 6 BE Hydro Prs After Column 6 se Column 7 Import Ry Formation Prs Column 7 MBE Column 8 eet BE E qv Fluid Weight Column 8 ix Column 9 Column 9 MBE Column 10 Column 10 MBE Column 11 Column 11 MIBE Column 12 Column 12 Edit Data File Reload Data File Sample portion of file _ seq md tyd ssl hp before hp aft
156. ne 3 Click and drag the mouse and a line will be drawn The drag must start anywhere outside the highlighted or drawn area of your highlighted annotation and inside the confines of the track and remain inside the track boundaries 4 Release the mouse and the line will be drawn Utilize the j buttons for arrow heads and tails Also line style and thickness drop boxes can be used to further define your drawn line 5 Repeat step 3 to redraw the line 6 Click anywhere outside the annotation box to close the toolbars Repeat steps 2 6 for more annotations Editing Annotations Lithology Descriptions 1 Make the Lithology Description or Annotation layer active by clicking on the track that has an Annotation layer on it and then selecting that annotation layer you want to work with from the Layer Section list on the Selection Toolbar 2 Click in annotation field box to highlight the field and activate the RTF Toolbars 3 Edit this field as you normally would utilizing the keypad mouse and toolbars to edit anything inside this annotation field or add a line 4 Click outside of the highlighted text field to close the toolbars Addendum Manual Version 9 0 page 108 POWERXSUITE Addendum User Manual Version 9 0 Resizing Annotations Lithology Descriptions 1 oo es ON Make a Lithology Description or Annotation layer active by clicking on the track that has an Annotation layer on it and then selecting that annotation layer yo
157. ng Report Note All gasses are entered in percentage form and the C4 s and C5 s will be totaled for you in the final Morning Gas Report Gas Summary on Jun 16 2004 Save Undo New it Interval foo to 1010 Total Gas C1 C2 C3 iC4 nC4 iC5 nC5 Mintz 1345 234 1 23 foe7e fo234 0231 0324 0 342 Max a 678 424 345 losa foser fo435 fo5a7 0 549 Remarks Formation gas coming from the Sunburst Could be of great importance and this zone may well produce oil at a significant rate Addendum Manual Version 9 0 page 61 POWERSSUITE Addendum User Manual Version 9 0 Adding a Gas Summary las Click on Morning Report under the Reports menu selection Then click on the Ges button to activate the Gas Summary window shown above Click on the Hew button or press ALT N and then fill in the report window with your data When you have finished adding your data click on the Sait button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Editing a Gas Summary 1 Interval Click on the Interval button to view a list of Gas Summaries to date and then double click on the record that you wish to edit ne First F Y Next Last Or Use the Database Navigational Tools Fist Prev Next Last to navigate through the records See the Database Navigational Tools section later in this User Manual for more information Once the selected interval is displaye
158. ng with the Title page legends individualized cores and formation tops on a continuous or single sheet basis 1 Under the File menu selection click on Print Log or click on the 3 Print button on the Toolbar to activate the Print Log window shown below Note The Title bar and all depths associated with the Print Log window are defaulted to the Depth View that Power Log or Power Curve are in at the time of the activation of the Print Log window Print View Mode MD Printer Acrobat Distiller Page Margin 0 25 Title PageLegendT ope ee Fe J legal landscape Page Overlap Options Print Methods i Strip Log Title Page W Logo C Default Core Log Title Page TRIVISOM EMP Sample Lag Title Page Title Page Remarks i Meta File Title Page remarks Color Options Only for the Striplog Ttle Page ean Legend Use Dynamic Legend fe ie Color 240 W Header W Footer C Mono Core Accessories User defined Interval Interval per Page Today Section 0 00 to 0 00 706 Well Section 0 00 to 0 00 Lithology Section 315 50 to 1593 50 Log Width User defined Interval Ei 5 5 to 1 993 5 Cores Print Seal 120 Header Footer i Exit Frinter Setup Formation Tops Help Cees 1200 Blank First Page Scale Title PageLegend T ops TEETE 2 Page Unientation See Select the appropriate paper orientation from this drop box field and the Title Page Legend and Formation Tops will automatically confo
159. nted on this layer Curve Units If the curves are logarithmic select the Log scale check box Log Scale Cycles 6 If the curves are logarithmic then the user must indicate how many log cycles you wish to display 7 Click on the LX J button Multi Array Data Dialog x Multi Array Data Dialog Left Bottom Right Top Left Bottom Right Top Scale DE 0 Curve Units z E Scale Di 1000 Curve Units johmm ad Group ID i W Use Curve Scale Group ID Le if Use Curve Scale Select Curves Select Curves Cure ID Ode o O rot set bot set rot set rok sek rot set Log Scale Cycles iM LogSeale Cycles 4 Delete Group Delete Group OF Linear Curve Data Logarithmic Curve Data Addendum Manual Version 9 0 page 139 POWER SUITE Addendum User Manual Version 9 0 Below is an example of the Multi Array data layer illustrating Linear Data Depth ba tngh del E thph lim rT T thph_san Note Every type of layer in Power Log Power Core and Power Curve has a Data Type classification The default Ez settings for the Multi Array Data layer are shown below To access this window click on the L Layer Configuration button on the Toolbar when the Rock Accessories layer is active Active Layer Configuration Multi Array Density Data Layer Layer Display Settings Curve Definitions Layer Scales Data Group IDe Formation and Age Display
160. nterval is derived from the Top and Base Depth values entered into the Print Sections window see Print Sections The Lithology Section interval is derived from what has been drawn into the interpretive lithology track of the well that is being printed 15 If user defined interval is chosen the user can select which depth type either measured depth true vertical depth or subsea level depth from the depth measurement drop box The user must also type in the depth interval to be printed Note The log itself must be displayed in whatever depth view you wish to print before you activate the print log window To change the log to the desired format refer to depth view under the view pull down menu In the Cores portion of the Print Log Window 16 If you are printing out a Core log on the tail of the striplog select the Cores you wish to print by highlighting them 17 Cores scale Select or type in the Scale for the core log to be printed out at in the Scale drop box field 18 M Header Activate this check box M to have the track headers printed out with the core log 19 I Footer Activate this check box to have the track footers printed out with the core log Note A separate Header Information Box is automatically printed out with every Core and includes the Core Scale Core Date Core Number Cored Interval Amount Cut Amount Recovered and Percentage A value must be entered into the Core Scale field in o
161. ogy track to activate the Rock Type Builder window 2 Right click anywhere within the Interpreted Lithology track to activate the pop up menu Addendum Manual Version 9 0 page 101 POWER SUITE Addendum User Manual Version 9 0 Rocks gt Base Contact gt Confirmation Save Do you really want to DELETE Acc Builder u Interbedding 1627 50 to 1636 007 Edit Options gt Exit 3 Click on Delete selection This will activate a confirmation window shown above Click on the Y es button to confirm the deletion Note When you delete a Rock Type you will also delete its associated bed restricted rock description information i e Grain Size Porosity Grade Type Oil Show and all other bed restricted data 4 Press the Esc key on the keyboard to exit from the Rock Type Builder window Interpreted Lithology Layer Rock Accessory Builder The Rock Accessory Builder allows you to add accessories to a Rock Type in the Interpretive Lithology layer Drawing Accessories 1 Double click anywhere within the Interpretive Lithology layer to activate the Rock Type Builder 2 Right click anywhere within the Interpretive Lithology layer to activate the pop up menu shown below or click on the Accessory button in the Rock Type Builder window Rocks gt Base Contact gt Save Delete Acc Builder Toolbox X Interbedding Edit Options gt Favorite List Exit 3 Select Acc Builder selection from the pop up menu to activate t
162. omatically set up the natural log cycles for you Carbonte Texture Scales Boundstane lt Clay this is an easy way to set your Carbonate texture scale for either the Carbonate Texture or Carbonate Texture matrix layers When this verbal selector is utilized it will automatically set up the linear cycles for you Addendum Manual Version 9 0 page 29 POWER SUITE Addendum User Manual Version 9 0 This is the only way to reset the Dip Meter Quality Scale range is by utilizing this feature The default is 0 to 1 This would depend on the data that has been imported or input manually through our report window Quality ranges would either be 0 to 1 or 0 to 100 depending on the vendor The Depth Axis grid represents the X axis on the log Horizontal lines on Power Log Core or Vertical Lines on Power Curve You can edit the Depth Axis grid or Frequency of Depth Lines and Depth Track Numbers in the Log Configuration window This is located in the Edit Pull Down menu Depth Axis Grid Style Style Select from Full or Ruler styles for your grid lines A Full style goes across the entire width of the layer while a Ruler style only goes partially across the layer Ruler The Data Axis grid represents the Y axis on the log Vertical lines on Power Log Core or Horizontal Lines on Power Curve Data dxis Grid Type Linear Data Axis Grid Type Select from Logarithmic Linear and Natural LN grid Bras types or lines This LN type N
163. on EI First P Next Last 2 Or use the Database Navigational Tools Fist Prev 2 Next Last to navigate through the records See the Database Navigational Tools section later in this User Manual for more information Select the record you wish Del to delete and it will be displayed in the Lithology Summary window Then click on the Delete button Yes 3 The user will be prompted with a confirmation Do you really want to delete Click on the button Unda l l l The button will restore the window to the settings of the last saved record You can Tab between fields or press Shift Tab to move backwards between fields Field Restriction Table Top Depth Mandatory Base Depth Optional Lithology Description 40000 Optional Addendum Manual Version 9 0 page 58 POWERXSUITE Addendum User Manual Version 9 0 Transferring a Sample Description Sample Click on the EA button in the Lithology Summary or the Well Formation window to activate the Transfer Sample Description window If you want to transfer Core Descriptions activate the Core Descriptions descriptions check box and you will see your core Transfer Sample Descriptions 735m Sh gn bk red mot in pt micmica occly aren amp sity n calcs stt E 135m Ss lt gy tgn t fr m srt shang sbrdd gtz mar fld occ lit fre 135m Cmt from ste ceg cmt job 140m Sh aa 140m Sist tg It gy gr gtzs pyric arg calcs tt n
164. on 9 0 How to Import Dip Meter Data with an Existing mapping file 1 To access the Dip Meter Data Import window click on Import Export under File to activate the pop out menu and then select Import Dip Meter or click on the A Import Dip Meter button on the Import Toolbar This will activate the open Dip Meter Data file window as shown below Open Dip Meter Data File Look in CQ CNRL Demo ex Ee B Jpeg Images Core in Boxes Ti core labs mapping file cdm E survey for Vict D JPG_Images eiidip meter data txt 2 cnrl mapping cvm E dip meter mapping drm 18 CNRL las BL Norwest lab data cs SL Core lab data csv E Norwest lab data xls E core lab data xls Wi norwest mapping file cdm gt File name dip meter data txt Files of type All Files v Cancel 2 Select the file from the folder or drive with the corresponding navigational tools provided and either double pen click on the file name or click once and click on the z button This will activate the Set delimiter window as shown below N B The one on the left the delimiter is set correctly the one on the right the delimiter is set incorrectly Set Delimiter Set Delimiter C Comma TAB Space Comma C TAB C Space Example 6 57 lt column break gt 39 4 lt column break gt 234 1 lt column break gt 50 lt column break gt 3 4 lt colt Example 6 57 9 4 234 1 50 3 4 193 8 COMPUTED lt 2 Correct Not Correct 3 Hi
165. on 9 0 The Style Field indicates the line style associated with the curve The user has five 5 styles to choose from They are Solid Dash Dot Dash Dot and Dash Dot Dot This field can be changed by clicking on the style field and selecting a new style from the drop down list The Color Field indicates the line color associated with the curve The user has a lot of curve colors to choose from This field can be changed by clicking on the style field and selecting a new style from the drop down list The Point Indicator Field indicates if the data points for the curve selected will be marked with some kind of indicator demonstrating where the actual curve data points are that make up the curve representation The user has a lot of curve point indicators to choose from This field can be changed by clicking on the style field and selecting a new point indicator or none from the drop down list Once a field in this Layer Configuration Tab dialogue window has been changed the user must then click on the Savel button or press ALT S How to select a different Curve to display on a Curve layer s Click on the track containing the Curve layer to make the track active Highlighted in Green 2 Click on the Layer Selection List located on the Selection Bar top left corner and select the desired Curve layer contained within the currently active track that you wish to edit or make a to 3 Click on the Edit pull down menu and select La
166. on Bed Restricted NBR layer types The bed restricted BR layer type is like a typical rock property layer sorting rounding grain size where you have to have a rock type in order to enter a sedimentary structure The sedimentary structure is also restricted to the bed you are drawing in Also when the bed is resized or deleted the sedimentary structure may be also resized or deleted if the sedimentary structures interval coincides with the beds resized or deleted interval The non bed restricted NBR layer type is not associated with any rock type or bed and can be entered anywhere within the track edges the user wishes and will not be affected by the resizing or deleting of a bed Adding a Sedimentary Structure Note All bed restricted description categories such as sedimentary structures BR are associated with a Rock Type and must have a Rock Type in order to be saved to the database Therefore you cannot add a sedimentary structure until there is a rock unit or bed interval added to the Interpreted Lithology Layer for that interval 1 Double click on the Sedimentary Structure track layer to activate the Sedimentary Structures Builder ast Toolb window and toolbox The toolbox can be turned on or off by clicking on the oe button in the builder Toolbox Favorite List Sedimentary Structures Bedding Cross bedding Laminations Cross Laminations cppxlam current ripple cross lamination v Other A
167. ons 1 S 6 Make a Lithology Description or Annotation layer active by clicking on the track that has an Annotation layer on it and then selecting that annotation layer you want to work with from the Layer Section list on the Selection Toolbar Click in annotation field box outline to highlight the field and activate the RTF Toolbars Right Click anywhere within the Annotation field that is highlighted to activate the pop up menu Cut Copy Paste Delete Apply Formatting gt Click on Delete selection and you will receive the following system message Delete Annotation X re you sure you want to delete this annotation Yes No Cancel Yes Click on button and the selected Annotation Lithology Description will be deleted accordingly Click outside of the highlighted text field to close the toolbars Using the List functionality to copy move to and delete annotations 1 Make a Lithology Description or Annotation layer active by clicking on the track that has an Annotation layer on it and then selecting that annotation layer you want to work with from the Layer Section list on the Selection Toolbar Right Click anywhere within the track borders not inside an active annotation to activate the pop out menu shown below Change Properties Range gt List Resize to Track Edit Options r Exit Addendum Manual Version 9 0 page 109 POWER SUITE Addendum User Manual Version 9 0
168. or is placed in the Interval From depth field 2 Type the Interval From and Interval To depth values into their respective fields and press the Tab key on the keyboard to move to the next field Addendum Manual Version 9 0 page 39 POWERSSUITE Addendum User Manual Version 9 0 3 Type in the Rock Type and press the Tab key 4 Type in a Percentage if you require one and Tab out of the field 5 This will make the button active The user can press the Enter Key with this button active and if the Rock Type abbreviation is correct the rock type will show in its associate field Or The User can click on the L 2 Lithology button and the rock type will show in its associate field 6 Ifthe rock type does not show in the field the user can pick their own rock type from the drop down box provided The reason why it would not be populated is either the rock type symbol does not exist or the Short Form was not abbreviated correctly for this field to be populated Tab to the Short Description field 7 Type the Short abbreviated Description into the Short Description field Note that any abbreviations that are misspelled or are not found in the Geology Dictionary will not be expanded Note When you type your abbreviations in ALL CAPS your long description will be ALL CAPS as well Similarly if you use all lower case letters in your abbreviations your expanded description will be all lower case You are also able to use capital lett
169. order The right hand side of the MDT Data Import window allows the user to see the data fields associated with the Dip Meter Table supplied by Power Suite MDT Run groups that have been made in the program Drop box allows the user to import the dip data into unique MDT Upen File OpenFile Button allows the user to open another MDT data file after the Import window has been opened Upen Map File Button allows the user to utilize the mapping file saved from above to remap data columns in the MDT data file to database fields in the MDT table in the database Save Map File i Button allows the user to save the mapping between data columns in the MDT data file to database fields in the MDT table in the database Once the initial mapping has been done and saved the user can utilize this mapping file so you do not have to repeat the clicking of dragging of data columns to database fields in the dip meter table again and again if you do not want to Clear All Mapping Button allows the user to undo all the mapping from data columns in the dip meter file to database fields in the MDT table that was done either by dragging or by utilizing the mapping file Edit Data File a Button allows the user to open the file in Wordpad to look at the file format and possibly make changes to the data file prior to importing the files data Reload Data File l l l l Button reloads the data into the sample portion of the file window Adde
170. otation layer on it and then selecting that annotation layer you want to work with from the Layer Section list on the Selection Toolbar Right Click anywhere within the track borders not inside an active annotation to activate the pop out menu shown below Basic colors E onl Eee ime fee FF Custom colors Change Properties Range Change Font Sizes it S pe g g g List Change Font Color 5 E e gg gg go Resize to Track Box Alignments Edit Options Change Display Scale Define Custom Colors gt gt Exit Click on the Change Properties Range selection and this will activate another pop out menu Click on the Change Font Color selection to activate the Color Window shown above Select the Color from the Color palette or define a custom color Click on the button This will activate the Format range window Addendum Manual Version 9 0 page 111 POWER SUITE Addendum User Manual Version 9 0 Format Range Beer Use Oto O for the whole log ep Interval lo to lo Ok Cancel 7 Enter specific values into the Interval From and Interval To fields if you are changing the font size for a specific interval of Annotations Otherwise leave the Interval From and Interval To fields defaulted to the numeral zero 0 for every Annotation on the log OK ae ee 8 Click on the p o Button This will change the annotations over the interval specified in the range window for that annotation laye
171. per Sand oarsely Upper ery Coarse Lower Sand ery Coarsely Lower ery Coarse Upper Sand ery Coarsely Upper ranules Lower inely mega Lower ranules Upper inely mega Upper ine Pebbles Lower oarsely mega Lower ine Pebbles Upper Coarsely mega Upper Medium Pebbles Lower Medium Pebbles Upper Coarse Pebbles Lower Upper Boulders Lower Upper Boulders Upper ee 0 00098 0 00147 0 00195 0 00299 0 00391 0 00585 0 00782 0 01172 0 015625 0 0234375 0 031250 0 037875 0 06250 0 09375 0 12500 0 18750 0 25000 0 37500 0 50000 0 75000 1 00000 1 50000 2 00000 3 00000 4 00000 6 00000 8 00000 12 00000 16 00000 24 00000 32 00000 48 00000 64 00000 96 00000 128 00000 192 00000 256 00000 384 00000 512 0000 768 00000 0 00147 0 00195 0 00299 0 00391 0 00585 0 00782 0 01172 0 015625 0 0234375 0 031250 0 037875 0 06250 0 09375 0 12500 0 18750 0 25000 0 37500 0 50000 0 75000 1 00000 1 50000 2 00000 3 00000 4 00000 6 00000 8 00000 12 00000 16 00000 24 00000 32 00000 48 00000 64 00000 96 00000 128 00000 192 00000 256 00000 384 00000 512 00000 768 0000 1024 00000 10 0 to 9 5 9 5 to 9 0 9 0 to 8 5 8 5 to 8 0 8 0 to 7 5 5 to 7 0 7 0 to 6 5 6 5 to 6 0 6 0 to 5 5 5 5 to 5 0 5 0 to 4 5 4 5 to 4 0 4 0 to 3 5 3 5 to 3 0 3 0 to 2 5 2 5 to 2 0 2 0 to 1 5 1 5 to 1 0 1 0 to 0 5 0 5 to 0 0 0 0 to 0 5 0 5 to 1 0 1 0 to 1 5 1 5 to 2 0 2 0 to 2 5 2 5
172. pop up menu Sedimentary Structures gt Abundance gt Edit Options gt Exit 3 Click on Delete and the Sedimentary Structure interval will be deleted accordingly 4 Repeat Steps 2 and 3 to delete more Sedimentary Structure intervals from the Sedimentary Structure track layer 5 Press the Esc key on the keyboard to exit from the Sedimentary Structure Builder window Deleting Multiple Intervals 1 Double click on the Sedimentary Structure track layer to activate the Sedimentary Structure Builder window Sedimentary Structures Bedding Cross bedding Laminations Cross Laminations cppxlam current ripple cross lamination T Other Abundance Occasional v 7 Dbl Click Interval Entry Edit Favorites V Snap To Nearest Toolbox Save Top Base 2 Press and Hold the SHIFT Key and then click and drag an area anywhere within the intervals you wish to delete 3 Release the mouse button to activate a Confirm Multiple Delete message Confirm Multiple Delete 7 Delete these Symbols Yes Mo 4 Click on E be deleted accordingly 5 Press the Esc key on the keyboard to exit from the Sedimentary Structure Builder window button and the Sedimentary Structure interval encompassed with your drag will Addendum Manual Version 9 0 page 123 POWER SUITE Addendum User Manual Version 9 0 Note Every type of layer in Power Log Power Core and Power Curve has a Data Type classification The default Ez settings
173. r Globally Change the Annotation Box Alignments 1 Make a Lithology Description or Annotation layer active by clicking on the track that has an Annotation layer on it and then selecting that annotation layer you want to work with from the Layer Section list on the Selection Toolbar 2 Right Click anywhere within the track borders not inside an active annotation to activate the pop out menu shown below Rae Change Font Sizes List Change Font Color Resize to Track Box Alignments Left Change Display Scale Center Edit Opti F it Options Right Exit Click on the Change Properties Range selection and this will activate another pop out menu Click on the Box Alignments selection to activate another pop out menu Select either left Center or Right from the pop out menu This will activate the Format range window FE go Format Range Use Oto O for the whole log Depth Interval o to 0 Ok Cancel 6 Enter specific values into the Interval From and Interval To fields if you are changing the font size for a specific interval of Annotations Otherwise leave the Interval From and Interval To fields defaulted to the numeral zero 0 for every Annotation on the log l OK os l ee 7 Click on the Button This will change the annotations over the interval specified in the range window for that annotation layer Globally Change the Annotation Display Scale 1 Make a Lithology Description or Annota
174. r Primary Well on the current log This Button or field if you have the Correlational Module will allow you to exhibit another wells data Note If you decide to use this log as a template for creating future logs and refrain from clearing the UWI field s in the Layer Configuration window s then all future logs created from this template will contain layers pointing to another UWI Ul If you possess the Correlational Module you can use the button to access data from other UWIls or wells within the database How to Display a different Wells data on a layer of an Existing Log from another UWI or well 1 To access other wells within the database click on the MMIII button This will activate a Well List window 2 Double click on the Well you wish to display on this layer This will select the well you wish to retrieve the data from You will now view the UWI of the well you chose in the UWI field of the Layer Configuration window However keep in mind that the type of well data that you are able to retrieve is dependent upon what layer was active at the time you attempted to retrieve the well data from within the Layer Configuration window For example If the active layer within the Layer Configuration window at the time of the retrieval was a Curve layer Then the only well data you would be able to retrieve from another well in the database via the GS button would be Curve layer data Foreground Color black
175. r is active and then click on the Formation and Age Display Tab Addendum Manual Version 9 0 page 55 POWERSSUITE Addendum User Manual Version 9 0 Morning Report This window gathers information to include in your Morning Reports Simply enter the requested criteria into the window and then this information can be printed out using the Print Morning Report window This report is combined with the Lithology information to give you the Summary and Lithology Reports This is the Morning Report window Morning Report Savel Undo New Del First Prev Next Last Lithologies Gas Date Sep 27 2001 Morning Depths MD fno 700 hs T D 11409 87 SSL 812 27 Hours Drilling 21 7 Daily Cost Accuml Cost 0 Formation Dowson Bay Operational Drilling Status Operational Dril surveys Summary Report From Bob Sephton Report To Homer McDonald Remarks Adding a Morning Report 1 Click on Morning Report under the Reports menu selection 2 Click on the Hew button or press ALT N and then fill in the report window with your data Note If the Directional Survey points are already calculated the Morning Depth TVD field will be calculated as soon as you type in a value in the Morning Depth MD field Otherwise the Morning Depth TVD field will show the same value that has been typed in the Morning Depth MD field 3 When you have finished adding your data click on the Sate button o
176. r of favorites for their favorite Trace Fossils list and then displays them in a pop up menu generated by a right click in the Trace Fossils layer track along with a tool box when the layer is activated How to Change the Trace Fossil Favorites Selection T Fossil Favorit 1 Click on the _Trace Fossil Favorites button in the System Options window to activate the Trace Fossils Favorites window Trace Fossil Favorites Favorite List Lo Lo Lorenzinia ma Ma Macaronichnus 0 Ophiomorpha P Planolites Set List Size 22 Caral ok Cancel Clear All l l 2 Click on the Ceara button in the Trace Fossils Favorites list window to prepare it for the selection of your Trace Fossil Favorites 3 Select by clicking on or highlighting some of your more commonly used Trace Fossils from the list window OK 4 Click on the o button to return to the System Options window 5 Click on the als button in the System Options window when you are finished Addendum Manual Version 9 0 page 83 POWERSSUITE Addendum User Manual Version 9 0 Grain Size Layer This layer gives the user the ability to add delete or change Entire Intervals and or Sub intervals of Grain Sizes for any given Interpreted Lithology Rock Interval Definitions of an Entire Interval and a Sub interval will help you to visualize how the system handles data on an interval basis Entire Interval An entire interval is one that is pert
177. r press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Editing a Morning Report Date 1 Click on the ne button to view a list of Morning Reports classified by date and then double click on the record that you wish to edit seas First F Y Next Last 2 Or use the Database Navigational Tools Fist Prev Newt Last to navigate through the records See the Database Navigational Tools section later in this User Manual for more information 3 Once the selected interval is displayed in the Morning Report window make any changes you feel are necessary Click on the Sate button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Deleting a Morning Report te 1 Click on the ints button to view a list of Morning Reports classified by date and then double click on the record that you wish to delete Once the selected record is displayed in the Morning Report window click on Del the Delete button First P Next Last 2 Or use the Database Navigational Tools Fist Prev 2 Nex Last to navigate through the records See the Database Navigational Tools section later in this User Manual for more information Select the record you wish Del to delete and it will be displayed in the Morning Report window Then click on the Delete button Addendum Manual Version 9 0 page 56 POWERXSUITE Addendum User
178. rd to exit from the Carbonate Texture Builder window Deleting a Sub Interval 1 Double click on the Carbonate Texture layer to expand the Carbonate Texture track and to activate the Carbonate Texture Builder window 2 On the Carbonate Texture layer right click anywhere within the sub interval that you wish to delete to activate the pop up menu Delete Sub Delete Entire Entire Interval Sequence SubInterval Sequence w Soft Edge Hard Edge Edit Options Exit Addendum Manual Version 9 0 page 116 POWERXSUITE Addendum User Manual Version 9 0 3 Click on Delete Sub and the Carbonate Texture sub interval will be deleted accordingly 4 Press the Esc key on the keyboard to exit from the Carbonate Texture Builder window Note Every type of layer in Power Log Power Core and Power Curve has a Data Type classification so the system knows what default settings to use when adding the layer to the log The Layer Configuration window shows the default settings for the Carbonate Texture layer 1 Select the left and right carbonate texture scales from the Carbonate Texture Scale drop boxes Save 2 Click on the Seve button and select amp J from the System Message window to exit the Layer Configuration window Carbonate Texture Matrix Layer This layer allows the user to log two carbonate textures bimodal carbonate texture at the same depth The layer gives the user the ability to add delete or change
179. rder to printout anything 20 Formation Tops Activate this check box if you wish to printout Formation Tops and the Formation Tops will be included on a separate page at the end of the log printout Page Margin 0 25 The page margin field is available primarily when you are printing to Adobe Acrobat writer When a numerical value in inches is typed into this field it will initiate a top and left margin for the templates Title Page Legend and Formation Tops as well as a left margin for the main log Addendum Manual Version 9 0 page 18 POWERXSUITE Addendum User Manual Version 9 0 Page Overlap Activate this check box if you are printing on single sheets This will force the printer to include an additional 1 4 inch of the log at the top and bottom of each page so that you can cut and paste pages manually if you so desire Activating the Default radio button fa forces Power Log Core amp Curve to use a raster or bitmap graphic printing E method This printing method is generally used with Laser printers but not exclusively so rr etmog eeu Activating the Meta File radio button i forces Power Log Core amp Curve to use the meta file keta File technology printing method This printing method was developed for the newer models of printers on the market today as well as using the Adobe Acrobat Distiller or pdf printing technology Auto Activating the Auto radio button forces Power Log Core amp Curve to
180. re multiple descriptions for one interval they will be placed on the log one meter apart in descending order of percentage or alphabetically if percentage was not used in the original sample core descriptions These can be edited later in the Annotation window Editing Previously Transferred Sample Descriptions Note The user must first close down the Sample Core Description Transfer window before you start editing the sample descriptions that have been transferred to the log Otherwise every time you click on the layer with the Sample Core Description Transfer window open you will either transfer a new description or be prompted to see if you want to transfer 1 Click anywhere within the Lithology Description track to make it the active track highlighted in green Then make the Lithology Description layer active by selecting it from the Layer Selection List 2 Click anywhere inside the Annotation field This will activate the RFT Editing boxes and highlight the annotation 3 Make any necessary changes to the Sample Description within the highlighted Region 4 Click outside the annotation field to finish or save the changes Note If you wish to edit any other Sample Description parameters including the Display Scale simply make the necessary changes within the RFT Toolbars and then click outside the annotation field to finish or save the changes Transferring Core Descriptions Before transferring Core Descriptions i
181. retive Lithology Track is the most convenient With the Snap to Lithology activated the lithology being drawn will snap to the previous lithology either above or below depending on your drag if you are within 10 times the mouse pointer or screen accuracy of the already drawn lithology 5 Release the mouse button and the interval will be drawn accordingly 6 The user can now define the base contact type by right clicking on the drawn interpretive lithology interval and selecting the desired basal contact type from the ensuing pop out menu Addendum Manual Version 9 0 page 97 POWER SSUITE Addendum User Manual Version 9 0 Rocks gt Bioturbated Save Bored Delete Burrowed Acc Builder Caliche f Calcrete Interbedding Corrasional i Dessication Cracks Edit Options gt Erosional Exit Exposure Firm Ground Flood Surface Glossifungites Gradational Hardgrounds Inclined Irregular Max Flood surface Mud Cracks Nodular Parasequence Boundary Ravinement Surface Regressive Surface of Erosion Rooted Scour Sequence Boundary Sharp Transgressive surface of Erosion Truncation Unconformity Wavy 7 Press the Esc key on the keyboard to exit from the Rock Type Builder window Note The Toolbox can be activated or deactivated by clicking on the aes button Drafting an Interpreted Lithology Interval with Interbedding 1 Double click anywhere within the Interpreted Lithology track to activate the Rock Type Builder window a
182. riaer ETET Mas 024 25 maeti Horth of the South boundaty ol Sec AH512 wl Lorgo 100577 EMA J10 12 aseti East of the Wiest boundity of See FHS 12 WM Intermediate Canny Poni Coordinates Lotto 01247 a AS I meli Herth o the Sth beard of Sog eT WA Lirie for Aa inor Dmi aed of the aral bure uy Se See we MVS 705 meters Hoth of oneal EA IAH meters Weit of oigna Sutece Irig 10 Driers 1 Crier TD C D Des T D Logger TO Loggen T D Toki Taki TVD Geap MO Sba Tv M TWD 1 fee he Bss Fx aE f g Fiskenta M 10 20m 1200 Wel Satur Poenis Lowe P Tephi Ol lated Binira water Depth Flefecemoe MEn Waa Depi jas jisma 2 In the KB field enter the KB In the Ground Collar enter the ground elevation as well as the UTM coordinates and the Hole ID if you have them 3 Click onthe button or press ALT S This will activate the Core Header window showing the KB and Ground Elevation that you have just entered i Exit 4 Click on the j button If the record has been successfully saved click on the appropriate button when prompted with the Shortcut Options system window How to Delete a Core Sample Header 1 Click on the Core Sample Header selection located under the Edit pull down menu This will activate the Core Sample Header window Del 2 Click onthe button and the Confirmation window will be shown Yes 3 Click on the button and the Core Header will be deleted Field Rest
183. riction Table Quality Remark Optional 40 000 Optional Addendum Manual Version 9 0 page 22 POWERXSUITE Addendum User Manual Version 9 0 Layer Configuration Edit pull down menu item The Layer is the lowest level of a log A layer is part of a track which in turn is part of a log The Layer Configuration window allows you to edit all aspects of any given layer You have access to all layer attributes including curve attributes layer grid styles and patterns and layer display controls You may also control the display format and depth offset of layers in this particular window None of the layer data types use all the layer controls A layer is a set of information that is displayed on a track A track can consist of one or more layers The layers are positioned within a track and are superimposed or stacked on top of one another if there are multiple layers ina track You are able to show hide the layers and adjust the layering order This can be done in the Layers Organizer window located under the view pull down menu You can only work with one layer at a time and we call this the active layer on an active track Layer information is restricted to the Primary Well of your log unless you have the Correlational Module which allows a layer to be pointed at any well in the database A layer can access any type of information in the Primary Well or any other well in the database and display it within the log A layer can be offset on i
184. rinting or viewing regardless of if the Scale on non active layers is checked Once a field in this Layer Configuration Tab dialogue window has been changed the user must then click on the ii button or press ALT S Addendum Manual Version 9 0 page 26 POWERXSUITE Addendum User Manual Version 9 0 Curve Definitions Tab This tab in the layer configuration window allows the user to change the curve attributes for each individual curve layer An example is shown below Active Layer Configuration Drill Rate Layer Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions Curve List Button Di Rate Edit Curve Attributes PoP E Solid r gy A Width Pattern Style Color Point Indicator Cancel Help Once a field in this Layer Configuration Tab dialogue window has been changed the user must then click on the Savel button or press ALT S The _Curve List Button button in the Curve Definitions tab of the Layer Configuration window activates a list of the curves associated with the active layers well These Curves have been created through the Add Curve window when new Curve layers have been added to a log or when a new log has been started The user has the ability to show any Curve and its values that has been added to the database as long as the data type for the layer is Curve The Edit Curve Attributes button activates th
185. riplog This will now also apply to all annotations done on the log as well We have also added a Redo button on the toolbar Added to the Sample Core Description Window an option to Transfer the Top Depth Only to the Strip Core Log We have revised the Bit Record window to a tab dialogue window to better organize the data We know also remember the Pump data from one bit record to another We also allow the user to enter as many nozzles as they have and the application will calculate the total flow area for those nozzles We have completely revised the Layer Configuration Window to better organize the data and added more fields to accommodate the Dip meter display We have added the ability to print the Striplog Header Legend and Formation tops to a Tabloid paper format with both Landscape and Portrait page orientations Addendum Manual Version 9 0 page 3 POWER SUITE Addendum User Manual Version 9 0 Import Dip Meter Data 7 Overview of the window 8 Importing Mapping of Dip Meter data 9 How to Import Dip Meter Data with an Existing mapping file 10 Import Modular Dynamic Tester MDT Data 12 Overview of the window 13 Importing Mapping of MDT data 14 How to Import MDT Data with an Existing mapping file 15 Print Log File Pull down menu 17 Undo Edit pull down menu item 19 Redo Edit pull down menu item 19 Well Window Edit pull down menu item 20 Core Sample Header Edit pull down menu item 21 How to Edit
186. rm to the selected orientation There are four 4 types of paper orientation to choose from letter portrait or landscape and legal portrait or landscape settings Note The letter or legal landscape or portrait settings selected from within the Print Log window will NOT override the paper orientation settings selected in the printer s Properties window Therefore you must also modify the paper orientation settings in your printer s Properties window to letter or legal landscape 3 Strip Log Title Page Activate this check box if you wish to printout a full Wellsight Version of the Title Page 4 Core Log Title Page Activate this check box If you wish to printout an abbreviated version of the Core Log Title Page 5 Sample Log Title Page Activate this check box If you wish to printout an abbreviated version of the Sample Log Title Page Logo 6 Activate this check box if you wish to printout a logo and then select a logo from the Logo drop box field TRIVISON BMP Addendum Manual Version 9 0 page 17 POWER SUITE Addendum User Manual Version 9 0 Note Any bitmap image may be printed out as a logo However the bitmap image must be an equally sided square image because Power Suite will shrink or expand the image to fit the logo space on the Title Page This bitmap should be placed in the Powersuite_V9 logo directory 7 Type any pertinent comments into the Title Page Remarks field and they will be d
187. rom the Formation Tops that are entered into the Well Formation window The depths entered into the Morning Report window are used to generate the Morning Formation Top report list However before a list can be generated two 2 reports must be filled in to initiate a range If your Sample Tops are located between these two 2 depths the Formation Tops will then come out in the Morning Addendum Manual Version 9 0 page 54 POWER SUITE Addendum User Manual Version 9 0 Note When you add any layer to a log it is always associated with a Data Type Every Data Type in Power Log Core amp Curve has a default setting The default settings for a Formations layer are shown below To access this E3 window click on the Layer Configuration button on the Toolbar when the Formations layer is active Active Layer Configuration Formation lops Shori Mame x Aclive Layer Conlipuralion Formation lops Shori Name Lape replay Selling ume Defntion Lape Seales Dats Group Di Fomation ond Age Display Dip Meter Definitions Layer Display Seling Curve Deirdire Lape Scaler Dala Group e Formann and Age Display Dap Hele Delran sawe Urda a Tye iae Ur Name Formation Tops Shor Mamei w son i i i Formation Dinlar Age Display Pomgten Lorg Hame Dieplaan Laver Format 2 Display Layer Meme w Cave Seale on Tesch Foregicund Color black BE l Ea Sheu ane Clitglap on Leper Format 1 fe Shon Loge on Track Depth Offret
188. rom the Rock Type field within the Rock Type Builder window if the desired Rock Type is not displayed in the pop up menu or Toolbox e The user can also click on a previously drawn lithology that is the same as you wish to draw with If done correctly the selected rock type will be automatically displayed in the Rock Type field within the Rock Type Builder window SSM Claystone gray Base Contact gt ees Coal ah AGE Glacial Til may Soa i HS Burrow cc Builder Wave Interbedding IHS Rock mr r Limestone grain supported Edit Options gt SSS Limestone mud supported Exit SoY 2 Mud Breccia ee ste Sandy IHS Rock ees Sandstone Note The graphical images utilized in the pop up menu represent specific Rock Types that can be edited by clicking Edit Favorites on the button by the user in the System Options window See the System Options section 3 The user can then select either a questionable interpretation or a poor sample quality from the Sample quality pull down menu Note Once activated it must be deactivated by selecting the blank selection from the list 4 Click and drag up or down within a specific track to define the lithology interval Or If there is a rock type defined above and below within 100 meters and you want to fill in the interval simply double click in the interval and it will fill in with the No data or Rock type selected Note This can be done on any track but more often than not the Interp
189. round the ones you wish to delete We have revised the Core Header Display We have expanded the information entered into the remarks field of this window This will enable the user to put in any information they wish The printed Core header is now dynamic and can change is size with the text that has been added We have revised the Well Record table input window with the Casing Coordinates We have revised the Well Formation table so the user can display either Sample Log or Prognosis tops for a particular formation to your striplog We have revised Bit Record table to retain the pump data and calculates the flow area as well as allow the user to enter as many nozzles as they like We have also added some dull characteristics for the PDC bits and their grading system We have added a sorting ability for our Generic categories so the user can change from our standard of ordered alphabetically to any order they wish to see for their generic category listings We have revised the Undo controls The Undo selection allows the user to undo any or all of the striplog manipulations with respect to the layer functionalities performed on the striplog This will now also apply to all annotations done on the log as well We have also added an Undo button on the toolbar We have revised the Redo controls The Redo selection allows the user to redo any or all of the striplog manipulations with respect to the layer functionalities performed on the st
190. rval Sequence w Soft Edge Hard Edge Edit Options Exit 4 Click on Delete Entire and the Grain Size Matrix will be deleted accordingly 5 Press the Esc key on the keyboard to exit from the Grain Size Matrix Builder window Adding a Sub interval 1 Make the Grain Size Matrix layer active within the Grain Size track by clicking on the track and then selecting the Grain Size Matrix layer from the Layer Selection List field 2 Double click on the Grain Size Matrix layer to expand the Grain Size track and to activate the Grain Size Matrix Builder window 3 Click and drag the mouse pointer from a specific Measured Depth and Grain Size as indicated within the mouse pointer display box to another Measured Depth and Grain Size within an entire Grain Size Matrix interval Note You can drag the pointer to the left or right of the Grain Size track to more accurately describe your grain size range 4 Release the mouse button and the Grain Size Matrix sub interval will be drawn accordingly Grain Size Matrix Builder Dell Size Sequence X Entire Interval 1452 50 to 1460 00 aunen Siad Sana Gen tt i l Snap to closest lithology c sit coarse silt Y to c sit coarse silt IV Dbl Click Interval Entry V Soft Edges 5 If you wish to see a different type of sequence and the user has previously dragged a subinterval right click within the subinterval to be changed and select the Subinterval Sequence selection and s
191. s Formation and Age Display Dip Meter Definitions Porosity Grade Scale Percent Layer Scale Dip Meter Scale Grain Size Scale Carbonate Texture Scale Depth Asis Grid Left 2 Right 0 00782 Verbal Settings Style Ful Gran ja ag8t ae Y ery Coarse Sand te Mery rine Silt Oab Asis Grid Type In r Units Dip Meter Quality Scale Linear Cycles Left Right Major Minor Increment E E Log Cycles Ea Cancel Help Note Every type of layer in Power Log Power Core and Power Curve has a Data Type classification so the system knows what default settings to use when adding the layer to the log The Layer Configuration window shows the default settings for the Grain Size Matrix layer 3 Select the left and right grain size scales from the Grain Size Scale drop boxes 4 Click on the button and select Layer Configuration window il from the System Message window to exit the Addendum Manual Version 9 0 page 92 POWERXSUITE Addendum User Manual Version 9 0 Porosity Grade Layer Definitions of an Entire Interval and a Sub interval will help you to visualize how the system handles data on an interval basis Entire Interval An entire interval is one that is pertinent to an entire rock unit or bed An entire interval cannot be added until a bed exists Sub interval A sub interval can be of any thickness less than the entire rock unit or bed and can rest within an entir
192. s Selection 79 How to Change the Accessory Favorites Selection 80 How to Change the Diagenesis Favorites Selection 80 How to Change the Lithology Sort Order 81 How to Change the Sedimentary Favorites Selection 82 How to Change the Fractures Favorites Selection 82 How to Change the Trace Fossil Favorites Selection 83 Grain Size Layer 84 Grain Size Matrix Layer 88 Porosity Grade Layer 93 How to Change the Porosity Grade Scale and grid pattern 95 Interpreted Lithology Layer Rock Type Builder 96 Overview of Rock type builder window 96 Addendum Manual Version 9 0 page 5 POWER SUITE Addendum User Manual Version 9 0 Drafting an Interpreted Lithology Interval Drafting an Interpreted Lithology Interval with Interbedding How to Draw with an already drawn Interbedded Interval Deleting the Interbedded portion of an Interpreted Lithology Interval Drafting a Lithology Interval with Lost Core No Sample or Overburden Inserting Thin beds Resizing an Existing Rock Type or Bed Deleting an Existing Rock Type or Bed Interpreted Lithology Layer Rock Accessory Builder Drawing Accessories Drawing an Internal Bedding Contact Moving a Thinbed Components Internal Contact Matrix or Cement Deleting a single Thin bed Components Internal Contact Matrix or Cement Deleting Multiple Thin beds Components Internal Contacts Matrix or Cements Annotation Builder Overview of RTF Font Toolbar buttons Overview of RTF Lines and Boxes
193. s in order to separate them more from the beds Use Global Symbols With the ability to edit existing metafiles the user may have imported a well that has used metafiles or symbols that have been modified to look differently than the one existing within your system symbols If you wish to use your symbol set instead of the revised imported ones you can select this check box to make that change Interbed Line Display Type This check box when activated will display the interbed data with a line display splitting the two lithology types or when unchecked will display the lithology in an interbed fashion as displayed below Addendum Manual Version 9 0 page 76 POWERXSUITE Addendum User Manual Version 9 0 Curve Backup fill This check box when activated will show a sideways hatching fill pattern when a curve goes off scale or in the backup mode If unchecked there will be no hatching pattern when the curve goes off scale Frequency 1 240 This drop box determines how often symbols are drawn on a Lithology Layer with the scale of 1 240 For example 1 symbol every 1 meter at 1 240 2 symbols every 1 meter at 1 120 1 symbol every 2 meters at 1 480 and so on These frequencies are only in effect if you utilize the entire interval in Oil Shows Rounding Sorting Framework or designated an interval in Sedimentary Structures Traces Fossils and Rock Accessories Lithology Profile This check box when activated will fill in th
194. s well as your Favorites List Toolbox Rock Type Builder Toolbox 3 Rock Type Interbeds Accessory savel Del 4 pal f Be to f 653 5 Sees ss cg sand cg W Confirm Delete Sample Quality Ho Data Description iW Snap to Litholagy Bae Eontack Glossiftungites Edit Favorites Toolbox Clear Fields Exit 2 Select a rock type There are 4 ways to select a rock type some faster than others e The user can click on the desired Rock Type from the Favorites Toolbox shown to the right e The user can right click anywhere within the Interpretive Lithology track to activate the pop up menu shown below Then select by clicking once on the desired Rock Type from the pop up menu e The user can select a Rock Type from the Rock Type field within the Rock Type Builder window if the desired Rock Type is not displayed in the pop up menu or Toolbox e The user can also click on a previously drawn lithology that is the same as you wish to draw with If done correctly the selected rock type will be automatically displayed in the Rock Type field within the Rock Type Builder window SSN Claystone gray Base Contact gt aes Coal Save AA Glacial Til pica Saag Hs Burrow ce Builder es Se el oe 2 Interbedding Sees HS Rock mr r Limestone grain supported Edit Options gt SSS Limestone mud supported Exit SoY 2 Mud Breccia me tee 5 Sandy IHS Rock wo Sandstone 3 Click and drag up or down within a specific track to def
195. scending order will be implied and the Top depth will be place in the Base depth field Note The Auto Next or the Auto Ine buttons should only be activated when the window has been cleared This would mean selecting either the Lot R or the 1 in the save options window If a Rock Type is present in the Rock Type field prior to using these buttons that Rock Type and its associated data will be associated with the new depths The Interval button displays a list of descriptions that have been entered to date for the current well Th 2 Lithal mp o e ae button takes the correct Rock Type abbreviation and places the rock type in its associated field If the abbreviation is not correct according to our expansion dictionary the rock type will not be placed Then the user can choose the rock type from the drop down box To Long D ET The ERE button expands the text you have typed in the Short Description field and places them in the Long Description field To Short Desc SER l The button abbreviates the text you have typed in the Long Description field and places them in the Short Description field Automatic Sample Description Transfer Options Transter Options i Automatic Description transter Transfer to Annotation Group lithtestt st iM Transfer Depth Range mM Too Depth Only Transter i Transfer Short Form The Automatic Description transfer check box W when activated will automatically transfer th
196. settings for a MDT layer are shown below To access this window E click on the Layer Configuration button on the Toolbar when the layer is active Active Layer Configuration MDT Data Layer Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions Save Undo Data Type Name MDT Data uw Display Layer Name or Curve Scale on Track Foreground Color dark green ki Show L Track idee aaa Depth Offset Display Vertical Orientation Layer Hame Display Scale Placements Eyer Start at Display Backup scales Display scales on non active layers Display Full Logarithmic Scale Display Depth Axis Grid Display Data Asis Grid Cancel Help Addendum Manual Version 9 0 page 66 POWERXSUITE Addendum User Manual Version 9 0 Sample Core Description Transfer Options pull down menu Item This utility can be used to transfer Sample and Core Descriptions entered into the Sample and Core Description Report windows to an annotation layer on the log Sample Core Description Transfer Undo First Prev T Next Last 1030 a 1035 Ss It gy It qush brn m e gr occly we gr modly w art shang brdd gtz com micas flkse mnr fld oce tre sile cmt predle disaggd g est intgran por 18 2422 com abnt brio stig bri yel flor g insts mky pel cut Flor Selections for Multiple Description Transfer Unche
197. sfer annotation in the Table of Contents for more information Evaluation Type in the Formation Evaluation pertaining to the lithology etc You may use the short forms and then click on the TaLong Dese button to lengthen the descriptions Conclusion Type in the Formation Conclusion pertaining to hydrocarbon potential You may use the short forms To Long O m and then click on the TaLong Dese button to lengthen the descriptions Field Restriction Table Group short 0 ajwlw NI Go G2 9 G9 O19 O1 Go OF N91 C1O E9 C O O oj O 01 O1 NIN 40000 40000 10 5 Note In order to have the Formation Evaluation report printed there are two fields that must be filled in Boundary Type and Period If these fields are left blank the Formation Evaluation Report for that Formation will NOT be printed 01 O1 NIN Note Format 1 displays Period short name Formation short name field a Bedding Line and the last two digits of the Sample Top Format 2 gives the Formation Name in long form True Vertical Depth TVD and Sub Sea Value SSL This format data can be viewed in the Layer Configuration window with Formation data types The Display depth field will only alter the Long Name format Also the Ages Era Period Stage Ages Track as well as tops Group Formation Member Formations Track can be displayed along the log Formation Tops are automatically generated in the Morning Report f
198. splay Settings Curve Definitions Layer Scales Data Group IDs Formation and 4ge Display Dip Meter Definitions Porosity Grade Scale Percent Layer Scale Dip Meter Scale Grain Size Scale Carbonate Texture Scale Depth sis Grid Left 20 Right 0 0078 eptrAxis lanl Verbal Settings Style Full Grain Size Scales Very Coarse Sand hal to Mery Fine Silt T Datas4sie Grid Carbonte Texture Scales Type in r to Units Dip Meter Quality Scale Linear Cycles Left Right Major Minor Increment Log Cycles E Cancel Help Once a field in this Layer Configuration Tab dialogue window has been changed the user must then click on the Savel button or press ALT S Porosity Grade Scale Percent Layer Scale Dip Meter Scale Grain Size Carbonate texture Porosity Grade Ee Ea hance ee de Percent and Dip meter layers Left and Right scale fields Left 2 Right 0 00782 These two fields are used to define the scales for the layers defined above Any other scales are handled by the digital curve attributes and scales The Grain size and Carbonate Texture scales can also be defined from the verbal setting selector On the horizontal log the left scale is the bottom and the right scale is the top Grain Size Scales Yem Coarse Sand to Verm Fine Silt This is an easy way to set your grain size scale for either the Grains Size or Grain size matrix layers When this verbal selector is utilized it will aut
199. ss of the interval that you have added to the log at least one symbol will be drawn in the middle of the interval Tip The frequency of symbols if not utilizing the arrows subintervals at any given scale is handled in the Systems Options window under the Options menu selection If you have selected 1 symbol every 2m at the 1 240 scale you will get 1 symbol every 1m at the 1 120 scale 1 symbol every 4m at the 1 480 scale and so on 8 Repeat Steps 3 7 to add more sedimentary structures to the track Note There are two ways how abundance can be shown If in the System Options window you have checked W Arowed Subintervals option each interval will be displayed with a different line style which specifies the abundance you have selected E g if occasional an interval arrow will be displayed as a dashed line while if abundant an interval arrow will be displayed as a thick solid line Otherwise all symbols within an interval will be displayed in the certain color which specifies the abundance you have selected E g if occasional symbols will be blue on the other hand if abundant symbols will be red 9 Press the Esc key on the keyboard to exit from the Sedimentary Structure Builder window Resizing an Interval 1 Double click on the Sedimentary Structure track layer to activate the Sedimentary Structure Builder window Mouse Pointer Method 2 Press the Ctrl key down on the keypad and move the mouse pointer over the interv
200. st Prev Next Last 1030 iE 1035 Ss It gy It gush brn m c gr occly ve gr modly w art sbang sbrdd gtz com micas Iks mrr fld occ tre ails cmt predle disagad g est intgran por 18 2422 com abnt brn o stng bri vel flor g inste mky wel cut flor Selections for Multiple Description Transfer Uncheck for Mult Transter From 350 to 1030 Lss C Single Transfer Core Section W Transter Depth Range Transfer W Transfer Short Form Top Depth Only Click on the From button to select the starting depth of the first interval that you wish to transfer to Click on the to button and select the starting depth of the last interval to be transferred Deactivate the Single Transfer check box E Click on the desired spot within the Lithology Description layer where you want the first description transferred and the following system message will be activated Do you really want to transfer sample core text between _ and _ to the log starting at_ Addendum Manual Version 9 0 page 68 POWERXSUITE Addendum User Manual Version 9 0 Y 6 Ifthe depths outlined in the system message are correct then click on the os button and the Sample Descriptions will be transferred to the log Note The depth difference between the position of the first description and the actual start depth interval of the first description will remain constant for the entire range of your current transfer If there a
201. strat Crystalline Name Size Range Size Range Wentworth mm from mm to 0 00098 0 00147 10 0 to 9 5 e os 0 00147 0 00195 __ 9 5 to 9 0 0 00195 0 00299 __ 9 0 to 8 5 popper Clay Upper Upper Crypto Upper 0 00299 0 00391 _ 8 5 to 8 0 0 00391 0 00585____ 8 0 to 7 5 J CCU per Very Fine Silt Very Finely micro Upper 0 00585 0 00782 _ 7 5 to 7 0 0 00782 0 01172 7 0 to 6 5 popper Fine Silt Finely micro Upper 0 01172 0 015625 _ 6 5 to 6 0 0 015625 0 0234375 __ 6 0 to 5 5 po Upper Medium Sit Medium micro Upper _ 0 0234375 0 031250 __ 5 5 to 5 0 0 031250 0 037875 _ 5 0 to 4 5 J Upper Coarse Silt Coarsely micro Upper 0 037875 0 06250 ___ 4 5 to 4 0 0 06250 0 09375 __ 4 0 to 3 pC ery Fine Upper Sand Very Finely Upper 0 09375 0 12500 ___ 3 5 to 3 0 0 12500 0 18750___ 3 0 to 2 5 pine Upper Sand Finely Upper 0 18750 0 25000 ___ 2 5 to 2 0 0 25000 0 37500 __ 2 0 to 1 5 po Medium Upper Sand Medium Upper 0 37500 0 50000 __ 1 5 to 1 0 0 50000 0 75000 ___ 1 0 to 0 5 L Coarse Upper Sand Coarsely Upper 0 75000 1 00000 __ 0 5 to 0 0 1 00000 1 50000 0 0 to 0 5 L Mery Coarse Upper Sand Very Coarsely Upper 1 50000 2 00000 0 5 to 1 0 2 00000 3 00000 1 0 to 1 5 L Granules Upper Finely mega Upper 3 00000 4 00000 1 5 to 2 0 4 00000 6 00000 2 0 to 2 5 L Fine Pebbles Upper Coarselymega Upper 6 00000 8 00000 2 5 to 3 0 Medium Pebbles Medium PebblesLower_ 800000 12 00000 3 0 to
202. t click in the Fractures layer track along with a tool box when the layer is activated How to Change the Fractures Favorites Selection iF a ae a y Fract Click on the _ Fractures button in the System Options window to activate the Fractures Favorites window shown on the next page Fractures Favorites Favorite List frac sher slic Shear Fracture with Slickensides as frac sher ss Strike slip Shear Fracture psa frac sher ss b Strike slip Shear Fracture with Brecciati i frac sher ss s Strike slip Shear Fracture with Slickensi frac w brec Fracture with Brecciation frac w slick Fracture with Slickensides fracs filled Fracture Filled fract shear Shear Fracture gt general fracture Fracture gt frac Grain Fractures GO or suture Grain Suturing v Clear All Cancel Set List Size 15 Clear All l Click on the Cewa button in the Fracture Favorites list window to prepare it for the selection of your Fracture Favorites Select by clicking on or highlighting some of your more commonly used fractures from the list window Click on the L button to return to the System Options window Click on the Savel button in the System Options window when you are finished Addendum Manual Version 9 0 page 82 POWERXSUITE Addendum User Manual Version 9 0 Trace Fossils Button T Fossil F it l The _Trace Fossil Favorites button when activated allows the user to determine the numbe
203. t is recommended that you expand the main log screen to the same scale that you will be using to printout your Core Log Normally Core Logs are printed on a log scale of 1 120 or less To select your scale click on the Log Scales field drop box located on the Toolbar in the main Power Log Core amp Curve window and select a Log Scale of 1 120 or less e g 1 96 or 1 48 Transferring a Single Core Description D k 1 Click on Sample Core Description Transfer under the Options menu selection or click on the aan Sample Core Description Transfer button on the Toolbar to activate the Sample Core Description Transfer window which will then display the last description entered into the current well Sample Core Description Transfer fx Undo Next Last List 1000 ha 1003 5 Sh mnt s lam s Sh is predly dk gy micmica carb sils fis Ss lam are thn 3mm and are predly lt gy f c gr occly wt gr py ert bang sbrdd gtz com micas flks mnr fd abnt sils cmt com cly amp pyric rite predle disagad predly tt rs Selections for Multiple Description Transter Uncheck for Mult Transter W Single Transfer gt 5 W Core Section Transfer Depth Range Transher W Transfer Short Form i Top Depth Only T First F Y Next Last Use the database navigational tools da eae LE to navigate through the records J OR Click on the button to enter query mode The Depth and Rock Type text fie
204. ta is defaulted to display the information ME RE HR 25 from the depth entered into the depth in field That can be changed by typing in a different depth in the Display Depth In field for the information The bow ties will remain at the depth the bit was tripped in Addendum Manual Version 9 0 page 45 POWER SUITE Addendum User Manual Version 9 0 Bit WRB HR Sst or 00 fs Are Cond GE VT A 6 The Bit Out data is defaulted to display the information F 1E RGTG from the depth entered into the depth out field That can be changed by typing in a different depth in the Display Depth Out field for the information The bow ties will remain at the depth the bit was tripped out Note The Bit In information consists of Bit Make and Type MEAG WRB HR 5 5 while the Bit Out information Bites WRB HR S3t Zor 00 fs Are Cond GE VT A consists of Bit Make Type Meters Drilled Rotating Hours and either Bit Grading Systems F 1E amp R GTG 7 When you have finished adding your data Click on the Sais button or press ALT S and then click on the appropriate button out of the ensuing Shortcut Options window Pump Data Tab This information is stored and remembered for the entire well You may wish to change the average strokes per minute and the output otherwise all should be good The only Bit Record Report that utilizes this information is the Full Bit Record Report The TBG and IADC do not utilize any of this information B
205. tabase to activate the generic group selection window shown below Interpretation Query Detailed rock type Select Facies Select Interpretation Key Horizons Clear Field Mudcake Perferated Intervals Cancel Sample Sedimentary structures unit Unit Number Washout Addendum Manual Version 9 0 page 35 POWER SUITE Addendum User Manual Version 9 0 Select 2 Click once on the Group Name Interpretation you wish to resort and then click on the button or Double Click on the Group Name This will activate a window that allows you to resort the Fill list as shown below Fills for Group Interpretation A Long Name Anoxic Lagoon with bulbous stroms Usps Inter Bank channel or pass fill Paleosol Rubbly Calcrete NS Foreslope Breccia SN Distal Foreslope Medial Foreslope Bioturbated Medial Foreslope Nodular distal fore reef rie YY medial Fore Reef a Proximal Fore reef proximal Fore Reef low energy Foreslope Sand Apron VINA Save Orderina Select Group Fills for Group Interpretation Long Name Anoxic Lagoon with bulbous s 14447 nter Bank channel or pass fill E Pslencal Biibhls Calcrete Foreslope Sand pas Vis We pS Medial Foreslope Bioturbated Medial Foreslope Nodular distal fore reef medial Fore Reef Proximal Fore reef proximal Fore Reef low energy Foreslope Sand Apron Foreslope Breccia Y MINS Save Ordering Select Group Fills for Group Interpretation Long
206. te Hard Edges Soft Edges f Soft Edges This M radio button will display the grain size with curved edges and rounded angles between the grain sizes Grain Size Fill Pattern Upward ete Pernt neni eS eegiees E This drop box allows the user to select a hatching pattern when using the Grain Size Layer with the Lithology Profile not activate Addendum Manual Version 9 0 page 77 POWERSSUITE Addendum User Manual Version 9 0 Grain Size Pattern Color eel This color selector allows the user to pick the line color foreground when the fill pattern option is used The background color is found in the Layer configuration for the Grain Size a l o a a a amp amp amp 4 4 g Grain Size No Pattern Hard edges Grain Size Pattern Soft edges Carbonate Texture Fill Pattern Upward ae Ee ee E This drop box allows the user to select a hatching pattern when using the Carbonate Texture Layer with the Lithology Profile not activate Carbonate Texture Fatter Lalor E This color selector allows the user to pick the line color foreground when the fill pattern option is used The background color is found in the Layer configuration for the Carbonate Texture Layer Carbonate Textures Hard Edges This radio button will display the grain size with strait edges and right angles between the Carbonate Textures The illustration below is shown with Lithology Profile activated Carbonate Textures 59ft Edges This fe radio button will
207. th a Remarks and Comments Layers they each will be assigned Group ID s of Remarks2 and Commentsz2 The new log will not show the same comments as the original log You can show any group of annotations on any annotation layer and this is shown below Generic Category Button You can use the __ ner Category Generic Category button only when the Data Type field displays Generic Category The user can use this button to associate a Generic Category Group and its associated data with a layer Generic Category Groups are listed by their Name MDT Run Number Button You can use the MDT Fiun No MDT Run Number button only when the Data Type field displays MDT The user can use this button to associate a MDT Run Group Numbers and its associated data with a layer A layer can be associated with only one MDT Run Number Group and its associated data MDT s are listed by their Run Number and can be selected by utilizing the drop box and selecting the according number from the List Then click T button Directional Survey Button You can use the Directional Survey Directional Survey button only when the Data Type field displays Directional Survey The user can use this button to associate a Directional Survey Group and its associated points with a layer Directional Survey Groups are listed by their Start Date and their Survey Group ID The default for any Directional Survey Layer is for it to display the Survey Group ID 1and i
208. the Example should read lt column break gt between the data columns If you see this then click on the Finish Frish button to close this window and activate the Dip Meter Data Import window shown on the next page Addendum Manual Version 9 0 page 7 POWER SUITE Addendum User Manual Version 9 0 Dip Meter Data Import Dip Meter Group Bedding Dips Open File Open Map File Save Map File Clear All Mapping Click and Drag with the Lett Mouse button Drag the columns of the data file over to the corresponding held Data Column Mapped Column Depth OAS Column 2 SE Dip Degree Ome Column 3 ag Dip Azimuth OR Columa 4 Quality Ome Column 5 ba Hole Deviation Degrees OR Column 6 Hole Azimuth Oe Column 7 Import 3 Edit Data File Reload Data File Sample portion of file H DEPTH H Overview of the window The left hand side of the Dip Meter Data Import window allows the user to view the different data columns represented in the file numbered in ascending order The right hand side of the Dip Meter Data Import window allows the user to see the data fields associated with the Dip Meter Table supplied by Power Suite E dding Di Dip Meter Group JP FSaInd MIPS Drop box allows the user to import the dip data into unique dip meter groups that have been made in the program Upen File __Open File Button allows the user to open another Dip meter file after the Import window has been opened Upen Map File i B
209. the MDT Test report The indications for the MDT Test Locations are handled through the MDT Data Entry windows The MDT Run 1 is added automatically when you add the MDT Layer to your striplog The actual MDT Data is entered through the pas button located in the upper right side of the MDT Runs Window The values can be entered into the report manually or can be imported through the Import MDT Data Utility Refer to Import MDT Data Utility Save Undo New Del Nest Last Data M Display this run Run Ha Semice Company Remarks AAA Testing amp Logging Compary This was run after looging the 2nd run and proved out some potential in the Red Sky one service Representative Ran Casing after these test Freddy Ww Ari Tool Type Advanced MOT Date Sep 11 2008 Geologist Manny Mendez ECN Adding a MDT Run 1 Click on MDT under the Reports menu selection to activate the MDT Runs window Hew Click on the button or press ALT N 2 3 Type inthe Run Number Field press the Tab key to advance the cursor to the next field 4 Type and Tab between all the fields and Fill in the appropriate information S l 5 When you have finished entering your data click on the cab button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Editing a MDT Run Aun Mo 1 Click on the a drop box to view a list of MDT Runs to date and then click on
210. the Porosity Builder window How to Change the Porosity Grade Scale and grid pattern Porosity Grade scale has to be changed through the Layer Configuration window 1 Click on the Porosity Grade layer to make it active Ez 2 Click on the Layer Configuration button on the Toolbar This will activate the Layer Configuration tab dialogue window 3 Click on the Layer Scales tab Active Layer Configuration Porosity Layer Display Settings Curve Definitions Layer Scales Data Group IOs Formation and Age Display Dip Meter Definitions 5 ave E ndl Percent Layer Scale Dip Meter Scale Carberate Texto cale Depth Asis Grid Petoal Settings Style Full Grain Size Scales to Data Asis Grid Carbonte Texture Scales Type Linear to Urita E Dip Meter Quality Scale Range Linear Cycles amO To 1 Major Minor Increment Log Cycles Cancel Help 4 Notice that the default scale when the porosity grade was originally added to the log was 25 to 0 To change the original scale from 25 0 to 12 to 0 simply adjust the Left Scale value to 12 by double clicking in the Left Scale field and typing in a value of 12 5 The user can also adjust the grid scale increments on the log in the Linear Cycles Increment portion of this window Save 6 Click on the Seve button and select amp d from the System Message window to exit the Layer Configura
211. the Reports menu selection Then click on the 2 button to activate the Lithology Summary window shown above 2 Click on the Hew button or press ALT N and then fill in the report window with your data 3 When you have finished adding your data click on the Sate button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Transferring a Sample Core Description into the Morning Lithology Report See Transferring a Sample Core Description on the following page for more information Editing a Lithology Summary Interval 1 Click on the Interval button to view a list of Lithology Summaries to date and then double click on the record that you wish to edit an 7 t Last 2 Or use the Database Navigational Tools Dea hi hiba ess to navigate through the records See the Database Navigational Tools section later in this User Manual for more information 3 Once the selected interval is displayed in the Formation window make any changes you feel are necessary Click on the Sate button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Deleting a Lithology Summary Interval 1 Click on the Interval button to view a list of Lithology Summaries to date and then double click on the record that you wish to delete Once the selected record is displayed in the Lithology Summary window click Del on the Delete butt
212. the Rock Accessory Builder window activated right click in the upper right corner of the Accessory symbol you wish to delete and the pop out menu will be activated Accessories gt Contact b Rock Builder Edit Options gt 2 Click on the Delete selection from the pop out menu and the selected Accessory symbol will be deleted 3 Press the Esc key on the keyboard to exit from the Rock Accessory Builder window Deleting Multiple Thin beds Components Internal Contacts Matrix or Cements 1 With the Rock Accessory Builder window activated Press and Hold the SHIFT Key and then click and drag an area where the symbols are that you want to delete 2 Release the mouse button and this will activate a message Confirm Multiple Delete Delete these Accessories Mo Y 3 Click on the button The accessories that were covered by your drag will be deleted Addendum Manual Version 9 0 page 104 POWERXSUITE Addendum User Manual Version 9 0 Note Every type of layer in Power Log Curve has a Data Type classification The default settings for the EE Interpreted Lithology layer are shown below To access this window click on the Layer Configuration button on the Toolbar when the Interpreted Lithology layer is active Active Layer Configuration Interpreted Litholopy Layer Display Settings Curve Definitions Layer Scales Data Group IDs Formation and Age Display Dip Meter Definitions Save Undo D
213. the record that you wish to edit a First P Y Next Last 2 Or use the Database Navigational Tools Fist Prev Nest Last to navigate through the records See the Database Navigational Tools section later in this User Manual for more information 3 Once the selected interval is displayed in the Sidewall Core Runs window make any changes you feel are necessary Click on the Sant button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Deleting a MDT Run Run Mo 1 Click on the A drop box to view a list of MDT Runs to date and then click on the record that you wish to delete Once the selected record is displayed in the MDT Runs window click on the he Delete button Addendum Manual Version 9 0 page 63 POWERSSUITE Addendum User Manual Version 9 0 oo First P Y Next Last 2 Or use the Database Navigational Tools Fist Prev Newt Last to navigate through the records See the Database Navigational Tools section later in this User Manual for more information Select the record you wish Del to delete and it will be displayed in the MDT Runs window Then click on the Delete button BS 3 The user will be prompted with a confirmation Do you really want to delete Click on the button Field Restriction Table Mandatory Service Company Optional Service Representative Optional Optional Optional Geologist Os Character
214. this 2 Click onthe CoN button and select a color from the palette and then click on the O Percent Layer Percent Clay Define Custom Colors gt gt button Fore Color OK 3 Click on the button and select a color from the palette and then click on the button Click on the Gradient radient to activate a check mark if you want the gradient option Click on the Pattern field box arrow to select a specific pattern type Click on the Snap to field box arrow in the Fills for Environment window and select any of the percents from the resulting choice list This allows the mouse to move or less precision when dragging in a percentage 7 Soft Edges soft Edges When checked will round off the percent and will present the percent edges with sine wave lines instead of strain lines PERE oz 9 AED paad oz ig AQ DO 0a ad oF QE Percent Hard edges Percent Soft edges i Save 8 Click on the button 9 Define the desired interval by clicking and dragging the mouse pointer from a specific Measured Depth and Percent as indicated within the mouse pointer display box to another Measured Depth on the Percent track 10 Release the mouse button and the percent interval will be drawn accordingly 11 Repeat steps 8 9 to define more intervals 12 Click on the button to exit the window Deleting Percents 1 Double click on the Percent track to activate the Percent Layer window Addendum
215. tion Tops Lithology Lithology Description Show All N 0 15 Slide Rotate MDT Mud Gas Hide All Multi Array Data Oil Staining ercent Porosity Grade Porosity Type Rack amp i b Show Hide TE Track Width 2 Log Width 124 9 C Layers IL sate Multi Array Density Data Layer Addendum Manual Version 9 0 page 138 POWERXSUITE Addendum User Manual Version 9 0 7 Click on the button This will activate the Log and the new track will be added to your log Setting up the Layer using the Dialogue Window 1 Double click on the Multi Array Data Layer to activate the Multi Array Data Dialogue window Multi Array Data Dialog Left Bottom Right Top Scale 0 00 i Curve Units units Group ID i Use Curve Scale Select Curves not sel rot sel not sel not sel rot sel nok set a Log Scale Cycles Delete Group OF 2 Click on the curves you want in this layer in the Select Curves portion of the window You can have as many as you like As you highlight the curve names they indicate which channel or ordering they will be displayed on the layer N B The curve list is provided from the curves that have been added through the log builder or have been imported through the ASCII or LAS Import utilities Lett Bottom Right Top 0 00 an 3 Type in or define or type in the left and right scales for your curve set 2Cale 4 Select or type in the curve units represe
216. tion later in this User Manual for more information 4 Once the selected interval is displayed in the Bit Record window make any changes you feel are necessary Click on each Tab to view all the information entered for this bit Save 5 Click on the Save button or press ALT S and then click on the appropriate button when prompted with the Shortcut Options system window Deleting a Bit Record 1 Click on Bit Record under the Reports menu selection BiH 2 Click on the button to view a list of Bit Records to date and then double click on the record that you Del wish to delete Once the selected record is displayed in the Bit Record window click on the Delete button First P Y Next Last 3 Or use the database navigational tools Fist Prev Newt Last to navigate through the records See the Database Navigational Tools section later in this User Manual for more information Select the record you wish Del to delete and it will be displayed in the Abandonment Plug window Then click on the Delete button Yes 4 The user will be prompted with a confirmation Do you really want to delete Click on the button Aligning All Bit Records 1 Make the Bit Record layer active within the Drilling Progress track by clicking on the track and then selecting the Bit Record layer from the Layer Selection List field 2 Right click anywhere within the Bit Record layer to activate the pop up menu IN Alignment OUT Align
217. tion layer active by clicking on the track that has an Annotation layer on it and then selecting that annotation layer you want to work with from the Layer Section list on the Selection Toolbar 2 Right Click anywhere within the track borders not inside an active annotation to activate the pop out menu shown below Change Properties Range Change Font Sizes List Change Font Color Resize to Track Box Alignments Change Display Scale Edit Options Exit 3 Click on the Change Properties Range selection and this will activate another pop out menu 4 Click on the Change Display Scale selection to activate the Select Scale Window Addendum Manual Version 9 0 page 112 POWERXSUITE Addendum User Manual Version 9 0 Select Scale Choose a scale Choose the appropriate scale from the drop box OF ak Click on the button This will activate the Format range window Format Range Use O to O for the whole log Depth Interval 0 to 0 Ok Cancel Enter specific values into the Interval From and Interval To fields if you are changing the font size for a specific interval of Annotations Otherwise leave the Interval From and Interval To fields defaulted to the numeral zero 0 for every Annotation on the log Ok as ee Click on the ok Button This will change the annotations over the interval specified in the range window for that annotation layer Globally Change the Box placements
218. tion window Addendum Manual Version 9 0 page 95 POWER SUITE Addendum User Manual Version 9 0 Interpreted Lithology Layer Rock Type Builder This window will allow you to draft on the Interpreted Lithology Layer The user can utilize the accessory builder The user may also define the basal contact if they have the Power Core Module We have revised this layer with respect to resizing a bed or interval We have also added the Interbedding options to the builder Overview of Rock type builder window Rock Type Builder Rock Type Interbeds Accessory Save Del ea E W Confirm Delete Sample Quality l No Data Description i Snap to Litholagy Bacebontack Glossitungites Edit Favorites Toolbox Clear Fields Exit pate Button The user can enter the depths into the two depth fields with either a rock type or no data fields filled in and then click on the Save button Their interval will now be drawn on the Interpretive Lithology Track Del Button The user can click on an existing interpretive lithology interval and the corresponding data will be shown in the builder The user can then click on the de button to delete the interval Ww Confirm Delete This Check box when activated will prompt the user with a z Confirmation window Do you really want to delete If this Confirm Delete jg ad cores unchecked the Lithology Interval will be deleted without any system message e Confirmation Do you reall
219. to an entire rock unit or bed An entire interval cannot be added until a bed exists Addendum Manual Version 9 0 page 113 POWER SUITE Addendum User Manual Version 9 0 Sub interval A sub interval can be of any thickness less than the entire rock unit or bed and can rest within an entire interval or can stand alone as a sub interval without being part of an entire interval You can have as many sub intervals as you wish If you enter a sub interval equal to the rock unit or bed the sub interval will become an entire interval Snap to Closest Lithology W Snap to closest lithology When checked allows the user to find the top or bottom of an interval easily with the mouse pointer as you have to be within 10 times the mouse pointer or screen accuracy of the interval to catch the top or bottom with a drag Double Click Interval Entry W Dbl Click Interval Entru When checked will allow the user to enter a Carbonate Texture over an entire interval with a double click on the left mouse button Soft Edges Ww Soft Edges When checked will round off the Carbonate Textures and will present the Carbonate Texture edges with sine wave lines instead of strain lines po F 9 5 1 fh SL O18 GUNG au OF pLg Carbonate Texture No Pattern Hard edges Carbonate Texture Pattern Soft edges Note If the Grain Size track contains two headings that overlap click on Layer Configuration under the Options menu selection and uncheck the Displ
220. to determine the font style type and size of your survey data associated with the Survey Layer on your log Layer Header Font Allows you to determine the font style type and size of your Layer Headers on your log All Layer headers use the same font across the entire log Bit Record Font Allows you to determine the font style type and size of your bit record data associated with the Bit Record Layer on your log Formation Tops Font Allows you to determine the font style type and size of your Formation Tops data associated with the Formation Tops Long and Expanded Layers on your log Depth Font This allows you to determine the font style type and size of the depth markers in the Depth track of the log Depth Orientation C Wert Horz These radio buttons allows the user to change the orientation of the Depth Font on the Layer Beware you may have to change the Track Width to accommodate the Font size and orientation Refer to the Log Configuration Builder to do this Show Depth Units This check box M when activated will display the depth units with the depth on the Depth Layer ie 1000 ft or 1000 m vs 1000 W Set As Default Fonts This check box when activated will make the font setting in this window your defaults for any new log created regardless on the Fonts stored in the template Addendum Manual Version 9 0 page 74 POWERXSUITE Addendum User Manual Version 9 0 Printer Font Size Used to scale the print
221. to fit in the Track width 1 Make a Lithology Description or Annotation layer active by clicking on the track that has an Annotation layer on it and then selecting that annotation layer you want to work with from the Layer Section list on the Selection Toolbar Right Click anywhere within the track borders not inside an active annotation to activate the pop out menu shown below Change Properties Range List Resize to Track Edit Options d Exit Click on the Resize to track selection This will activate the Format range window Format Range Use Oto O for the whole log Depth Interval 0 to 0 Ok Cancel Enter specific values into the Interval From and Interval To fields if you are changing the font size for a specific interval of Annotations Otherwise leave the Interval From and Interval To fields defaulted to the numeral zero 0 for every Annotation on the log l Ok ae ee Click on the Button This will change the annotations over the interval specified in the range window for that annotation layer Carbonate Texture Layer This layer gives the user the ability to add delete or change Entire Intervals and or Sub intervals of Carbonate Textures for any given Interpreted Lithology Rock Interval Definitions of an Entire Interval and a Sub interval will help you to visualize how the system handles data on an interval basis Entire Interval An entire interval is one that is pertinent
222. to the corresponding table field on the right side and release it when the field becomes highlighted If mapped the field HE will turn green on the right and red on the left N B The user can Right click on the Field to remove the mapping 2 Repeat the Clicking and Dragging of data columns to fields until all the columns that you want have been mapped Dip Meter Data Import Dip Meter Group Bedding Dips Open File Open Map File Save Map File Clear All Mapping Click and Drag with the Left Mouse button Drag the columns of the data file over to the corresponding field Mapped Column Column 1 Column 2 Column 3 Column 4 Re Hole Deviation Degrees Column 5 Rg Hole Azimuth Column 6 MBE Column 7 Import BE Type Column 7 Data Column Edit Data File Reload Data File Sample portion of file DEPTH Save Map Fil 3 The user can save this mapping procedure at this time by clicking on the Save Map File button and giving this procedure a file name and folder to be used again at a later date when you would have to import this data again Import 4 Click on the impot button After the data has been imported you will be prompted with a system message Database Message i Imported Successfully 5 Acknowledge the Import message Click on the button and then click on the i to exit or Exit click on the button to close the Window Addendum Manual Version 9 0 page 9 POWER SSUITE Addendum User Manual Versi
223. ts associated points Addendum Manual Version 9 0 page 31 POWER SUITE Addendum User Manual Version 9 0 Graphics Button The Graphics Graphics Groups button is used when a Graphics layer is the currently active layer within the Layer Configuration window The Graphics Group button allows you to associate an existing Graphics Group to the currently active layer Graphic Groups are listed by their Group Number Name and can be is OF selected by utilizing the drop box and selecting the according number from the List Then click on the button Detailed Lithology Group Button The Detailed Lithology Group Detailed Lithology Group button is used when a Detailed Lithology layer is the currently active layer within the Layer Configuration window The Detailed Lithology Group button allows you to associate an existing Detailed Lithology Group to the currently active layer Each Detailed Lithology Layer added when creating new logs for a well or adding a Detailed Lithology layer track to a log is assigned a unique Detailed Lithology Group ID So for every Detailed Lithology layer that is associated with a well there is a new Detailed Lithology group created Accordingly if you have multiple Detailed Lithology layers associated with a single well then the system will have to assign a unique Group ID number to each of the Detailed Lithology layers within each of their respective Layer Configuration windows For example The First D
224. ts depth axis to make correlations between wells relatively simple In the Layer Configuration window you are able to associate specific Annotation Groups with Annotation layers via their Annotation Group ID The user can also associate specific Data Groups with a specified layer Note The Correlational Module allows you to access all of the UWI s or wells in the database in order to display their information in comparison with the current Primary Well on the same log There are numerous Data Types for Layer Configurations Each data type viewed below are shown in the data type field of each layer and it represents what type of data each layer can show For instance a Curve layer can only show curves The directional survey layer can only show survey data These data types are listed on the next page Accessories Depth Porosity Grade Age Era Series Stage Detailed Lithology Porosity Type Annotation Track Diagenesis Physical Contacts Annotation Log Dip Meter Data Rounding Directional Survey Core Saturated Bulk Mass Fluids Formation Group Formation Core Saturated Bulk Mass Oil Member Core Saturated Bulk Mass Water Formation Short Name Core Saturated Bulk Mass Solids Formation Long Name Core Saturated Bulk Mass Totals Bedding Contacts Bioturbation Bit Record Carbonate Texture Carbonate Texture Matrix Casing Data Core Core Box Data Core Bulk Density Core Grain Density Core Permeability Kma
225. u have finished adding your data Click on the aN button or press ALT S and then click on the appropriate button out of the ensuing Shortcut Options window Bit Grading Tab This information is utilized in all Bit Record Reports Bit Records and Related Data Bit Records Purp Data Drilling Parameters Bit Grading Save Undd New Del Fist Prev Next Last T BG Bit Grading System Teeth Bearing Gage 0 for in gage IAD Bit Grading System Inner 4 Sealed Bearings E Outer B o 0 for in gage MOL BT Gage 0 Location A Other DC FC Cone Reaz on Pulled 1 BHA Non Sealed Bearings Reason Pulled 2 CP me Remarks Nothing Cancel Help 1 Click on the Drilling Parameters Tab 2 Tab through the fields and type the appropriate information in each field Addendum Manual Version 9 0 page 47 POWER SUITE Addendum User Manual Version 9 0 3 When you have finished adding your data Click on the Sete button or press ALT S and then click on the appropriate button out of the ensuing Shortcut Options window Editing a Bit Record 1 Click on Bit Record under the Reports menu selection BitH 2 Click on the button to view a list of Bit Records to date and then double click on the record that you wish to edit T First P Y Next Last 3 Or use the database navigational tools Fist Prev Newt Last to navigate through the records See the Database Navigational Tools sec
226. u want to work with from the Layer Section list on the Selection Toolbar Click in annotation field box to highlight the field and activate the RTF Toolbars Place the mouse pointer over one of small boxes CJ used to define the outline around the Annotation Lithology Description and the mouse pointer will transform into a double arrow Click and drag the mouse pointer to define the new size for the Annotation Release the mouse button and the Annotation Lithology Description will be redrawn within its newly defined area Click outside of the highlighted text field to close the toolbars Moving Annotations Lithology Descriptions 1 4 O 6 Make a Lithology Description or Annotation layer active by clicking on the track that has an Annotation layer on it and then selecting that annotation layer you want to work with from the Layer Section list on the Selection Toolbar Click on annotation field box to highlight the field and activate the RTF Toolbars Move the mouse pointer on the highlight surrounding the selected Annotation Lithology Description and the mouse pointer will transform into the shape of a cross with four P arrows Click and drag the mouse pointer to the Annotation s Lithology Description s new position Release the mouse button and the Annotation Lithology Description will be redrawn at its new location Click outside of the highlighted text field to close the toolbars Deleting Annotations Lithology Descripti
227. urbation may be also resized or deleted if the trace fossils interval coincides with the beds resized or deleted interval The non bed restricted NBR layer type is not associated with any rock type or bed and can be entered anywhere the user wishes and will not be affected by the resizing or deleting of a bed Adding a Degree of Bioturbation Note All bed restricted description categories such as Degree of Bioturbation BR are associated with a Rock Type and must have a Rock Type in order to be saved to the database Therefore you cannot add a Degree of Bioturbation until there is a rock unit or bed interval added to the Interpreted Lithology Layer for that interval 1 Double click on the Bioturbation track layer to activate the Bioturbations window Bioturbations biotrbe Bioturbated churned Y Abundance Common V Dbl Click Interval Entry V Snap To Nearest re 110 28 Bates 110 72 Toolbox Save 2 Right click anywhere on the Bioturbation track layer to activate the pop up menu Bioturbations gt Abundance gt Delete Edit Options gt Exit 3 Click on the Bioturbation selection to activate the pop out menu and then select from the pop out list or click in the builder drop down menu selections to access the list provided in them Either way once you have selected one it will be populated in the builder Tees r Bioturbated barren Abundance Bioturbated churned Delete x Bioturbated
228. use the settings from the printer driver to printout the log Color Uptions a fa Baa Color Activating the Color radio button forces Power Log Core amp Curve to override the l O Cala printer driver settings and consequently Power Log Core amp Curve assumes that you are using tore a color printer Mono Activating the Mono radio button forces Power Log Core amp Curve to override the printer driver settings and consequently Power Log Core amp Curve assumes that you are using a monochrome black and white printer Printer Setup l 21 Click on the Printer Setup button to activate the Print Setup window and confirm that the correct printer settings are in effect 22 Interval per page field indicates how many meters of log will fit on a page of selected paper size and orientation selected in the setup as well as what log scale you are printing at This will help indicate to the user how many pages will be required by the print job 23 Blank First Page Activate this check box if the user wishes to have a blank page before the logs starts This could be useful if utilizing continuous paper when you want the title page oriented on the correct side of the prefolded paper 24 When you are ready to print your log click on the o Pie button Note If you do exit from the Print Log window you will be asked if you wish to save the print settings If you click on Yes the program will remember every setting th
229. uters buffer The larger the look ahead number the longer it takes for Power Log Core amp Curve to refresh the screen when you exceed the look ahead value However until you meet or exceed the look ahead value scrolling will be much faster because the database is not yet being accessed Addendum Manual Version 9 0 page 73 POWER SUITE Addendum User Manual Version 9 0 Fonts Tab This tab allows the user to set up most of the fonts used in Power Log Core and Curve You can set it up to be used on the current log as well as using the fonts as your defaults when you are making new logs System Options General Fonts Display Favorites Fonts Annotation Font Track Header Font AabbCcOdEe AaBbCcDdE Cet Survey Font Laver Header Font AaBbtcDdEe cet ACBbCcDdEe ee Bit Record Font Formation Top Fort AaBbCcDd Ee ca AaBbCcDdEe Depth Fort AaBbCcDdEe Cet E Apply to Curent Log Depth Orentation C Yet Horz Show Depth Units W Set As Default Fonts Printed Font Size of Screen Font used to scale printed fonts jas Annotation Font Allows you to determine the default font style type and size of your annotations on your log Also this is the default when you use any of the Sample Description Transfer options Track Header Font Allows you to determine the font style type and size of your Track Headers on your log All track headers use the same font across the entire log Survey Font Allows you
230. utton allows the user to utilize the mapping file saved from above to remap data columns in the dip meter file to database fields in the dip meter table in the database Save Map File i Button allows the user to save the mapping between data columns in the Dip meter survey file to database fields in the Dip meter table in the database Once the initial mapping has been done and saved the user can utilize this mapping file so you do not have to repeat the clicking of dragging of data columns to database fields in the dip meter table again and again if you do not want to Clear All Mapping l l Button allows the user to undo all the mapping from data columns in the dip meter file to database fields in the dip meter table that was done either by dragging or by utilizing the mapping file Edit Data File Edit Data Fie Button allows the user to open the file in Wordpad to look at the file format and possibly make changes to the data file prior to importing the files data Reload Data File l l l l Button reloads the data into the sample portion of the file window Addendum Manual Version 9 0 page 8 POWERXSUITE Addendum User Manual Version 9 0 Importing Mapping of Dip Meter data A Dip Meter Layer should already have been added through the Log configuration builder so that a Dip Meter group exists in the database to be able to import Dip Meter data 1 On the left side of the window Click and drag the data column you wish to import
231. val basis The long descriptions will be used in the Core Description Report that is printed out in the Well End Report print window We have modified the window to get rid of some of the confusing buttons and we have added an Ascending Check box so that user can either log up or down with respect to the depth intervals Note If the descriptions are entered into this Core Description report and transferred to the Striplog and then edited on the striplog the descriptions entered in this Core Description reports remain unchanged Core Description Save Undo New Del Next Last Dictionary Auto Next V Ascending Interval Rock Type Heading 1003 5 1000 to 10085 Sh mmrSslam Short Description To Long Desc Sh is predly dk gy micmica carb sils fis Ss lam are thn lt 3mm and are predly It gy f c gr occly vf gr py srt sbang sbrdd gtz com micas flks mnr fld abnt sils cmt com cly amp pyric mtx predly disagad predly tt ns Long Description Shale with minor Sandstone laminae To Short Desc Shale is predominately dark gray micromicaceous carbonaceous siliceous fissile Sandstone laminae are thin lt 3mm and are predominately light gray fine to coarse grained occasionally very fine grained poorly sorted subangular to subrounded quartz common micaceous flakes minor feldspar abundant siliceous cement common clay and pyritic matrix predominately disaggregated predominately tight with no shows
232. wing choices are available from this drop box Left Middle Right and Blank Leave this box blank if you don t want the Formation Top to be shown on the layer but still want the Formation Top to be printed out via the Well End Report window If you are using the Formation layer in more than one track you should beware of layer overlapping You will discover which the best alignment for all layers is You have one selection for all layers using this format Long Name Display Depth field is defaulted to empty Display Long name data at the sample top measured depth The user can change the display depth for the Long Name by typing in a depth in this field Display Display Options on the tops allows the user to show the Prognosis top the Sample C Prog Smp Log top or the Log top on the Log This applies to all the display options on the Formations and Ages Layers Addendum Manual Version 9 0 page 53 POWER SUITE Addendum User Manual Version 9 0 Button Click on the button to activate the Transfer Sample Description window from which you may copy Sample Core Descriptions into either the Evaluation and or Conclusion fields See Copying a Sample Core Description in the Table of Contents for more information Annotations l Annotations l l l l Button Click on the Button to activate the Transfer Annotations window from which you may copy Lithology Descriptions into either the Evaluation and or Conclusion fields See Tran
233. within the sub interval that you wish to delete to activate the pop up menu shown below Delete Sub Delete Entire SubInterval Sequence Entire Interval Sequence w Soft Edge Hard Edge Edit Options Exit 3 Click on Delete Sub and the Grain Size sub interval will be deleted accordingly 4 Press the Esc key on the keyboard to exit from the Grain Size Builder window Addendum Manual Version 9 0 page 86 POWERXSUITE Addendum User Manual Version 9 0 Expanded Combined Canstrat Wentworth Grain Sizes Clastic Crystalline Rocks Clastic Name Canstrat Crystalline Name Size Range mm from Size Range Phi mm to Clastic Name Wentworth ower Clay oper Clay ery Fine Silt ine Silt Medium Silt oarse Silt ery Fine Sand ine Sand Medium Sand oarse Sand ery Coarse Sand ranules ine Pebbles Medium Pebbles oarse Pebbles ery Coarse Pebbles ower Cobbles oper Cobbles ower Boulders pper Boulders Lower Clay Lower Lower Crypto Lower Lower Clay Upper ower Crypto Upper pper_Crypto Lower Upper Clay Uppers Crypto Upper ery Finely micro Upper ery Finely micro Upper inely micro Lower inely micro Upper Lower Medium Silt Medium micro Lower Upper Medium Sitt____ Medium micro Upper oarsely micro Lower Upper Coarse Silt oarsely micro Upper ery Finely Lower ery Finely Upper inely Lower ine Upper Sand inely Upper Medium Lower Sand Medium Upper Sand oarsely Lower oarse Up
234. x Core Permeability K90 Core Permeability KV Core Permeability K Air Core Porosity Calculated Core Porosity Helium Core Porosity Measured Core Sample Code Curves Curve Fill Date Drilling Schedule Shortcut ES Fractures Framework Generic Category Grain Size Grain Size Matrix Graphics Hole Dip Meter Data Interpretive Lithology Lithology Lithology Descriptions MDT Data Multi Array Curve layer Oil Show Oil Staining Percent Core Saturated Grain Mass Oil Core Saturated Grain Mass Water Core Saturated Pore Volume Oil Core Saturated Pore Volume Water Core Saturated Pore Volume Frc Oil Core Saturated Pore Volume Frc Water Sedimentary Structures Sidewall Cores Slide Rotate Snieder s Rock Type Geology Snieder s Rock Type Core Sorting Survey Test Trace Fossils This is an example of our Tab Dialogue Configuration window for a Curve Data Type Layer Addendum Manual Version 9 0 page 23 POWER SUITE Addendum User Manual Version 9 0 Active Layer Configuration Drill Rate Lies Display Saingi Curve Definitions Lever Scales Date Group IDs Formation and Age Display Dip Meter Definitions Save Undd Doto oe t lt Ctsi sS d Have iii amp Fiabe w 1 Capi Lave Hae of lune Sake on Tack Foreground Color ibe k L x Tie Lipi on rack Decth Oiteet Dipi Veica Diantar ayi Ha l Dita Backup scobes w Display ea on res ia la Dipi Srne
235. xt highlighted this button will activate an Underline Font style i At the flashing cursor or with some text highlighted this button will activate an Strikethrough Font style At the flashing cursor or with some text highlighted these buttons will orient the text line or paragraph left centered or right within the box outline Atthe flashing cursor or with some text highlighted this button will place a bullet at the start of the text line or paragraph E tE atthe flashing cursor or with some text highlighted these buttons will indent or tab the text line or paragraph either left or right r At the flashing cursor or with some text highlighted this button will activate a new Font color EN At the flashing cursor or with some text highlighted this button will activate a Font background color RIF Box Centre RTF Box Lef RTF Box Right Display Scale RTF Lines and Boxes Line Style Line Thickness Display Text Tail on End of Line Tail on Start of Line Display Line Arrow on End of Line Display Box Outline Arrow on Start of Line Addendum Manual Version 9 0 page 106 POWERXSUITE Addendum User Manual Version 9 0 Overview of RTF Lines and Boxes Toolbar buttons Left Right Centered Text boxes With the text box or annotations outline activated these buttons will orient the text box left centered or right within the track borders The user can also click and drag on the box outline to any orientation on the tra
236. y 4 Press the Esc key on the keyboard to exit from the Porosity Builder window Adding a Sub Interval Note An entire interval does not have to be in effect in order to add a sub interval You can add a sub interval to a rock layer or bed that does not contain an entire interval To add a sub interval 1 Double click on the Porosity Grade layer to expand the Porosity track and to activate the Porosity Builder window 2 Click and drag the mouse pointer from a specific Measured Depth and Porosity as indicated within the mouse pointer display box to another Measured Depth on the Porosity track 3 Release the mouse button and the Porosity sub interval will be drawn in green accordingly 4 Repeat Steps 2 and 3 to add more Porosity sub intervals 5 Press the Esc key on the keyboard to exit from the Porosity Builder window Deleting a Sub Interval Addendum Manual Version 9 0 page 94 POWERXSUITE Addendum User Manual Version 9 0 1 Double click on the Porosity Grade layer to expand the Porosity track and to activate the Porosity Builder window 2 On the Porosity layer right click anywhere within the green sub interval that you wish to delete to activate the pop up menu shown below Delete Sub Delete Entire w Soft Edge Hard Edge Edit Options F Exit 3 Click on Delete Sub and the Porosity sub interval will be deleted accordingly 4 Press the Esc key on the keyboard to exit from
237. y Type Builder window Rock Accessory Builder Rock T vpe Thinbed bd Component Ga Matrix Cement Contact Edit Favorites Toolbox e Right click anywhere within the Interpretive Lithology track to activate the pop out menu Then click on the Contact selection to initiate the pop out menu and click on the desired Internal Contact from the pop out menu Addendum Manual Version 9 0 page 103 POWER SUITE Addendum User Manual Version 9 0 Accessories P Conkack P Bioturbated Delete Bored Rock Builder Burrowed Caliche Calcrete Edit Options F i Corrosional Exit Dessication Cracks Erosional Exposure Firm Ground Flood Surface Glossifungites radational Hardgrounds Inclined Irregular Max Flood surface Mud Cracks Modular Parasequence Boundary Rayvinement Surface Regressive Surface of Erosion Rooted Scour Sequence Boundary Sharp Transgressive surface of Erosion Truncation UnconForrmity Wavy 5 Click anywhere within the Interpretive Lithology track to insert the selected Accessory Moving a Thinbed Components Internal Contact Matrix or Cement 1 With the Rock Accessory Builder window activated click and drag the Accessory symbol you wish to move and drag the red box to the new location 2 Release the mouse button and the accessory or internal contact will be redrawn at the new position Deleting a single Thin bed Components Internal Contact Matrix or Cement 1 With
238. y right clicking on the drawn interpretive lithology interval and selecting the desired basal contact type 8 Press the Esc key on the keyboard to exit from the Rock Type Builder window Resizing an Existing Rock Type or Bed 1 Double click on the Interpreted Lithology track to activate the Rock Type Builder window 2 Press and hold the Ctrl key on the keyboard down while moving the mouse pointer over the lithology bed boundary you wish to resize the mouse pointer will turn into a resize remember if two beds are touching to look into the builder to see if you have the correct one selected 3 Clicking and dragging the left mouse button up or down the Interpreted Lithology track to either shrink or enlarge the selected interval Note You are not allowed to overlap an existing bed lithology entirely and if you attempt to do so you will receive an Unsupported Add Sequence system message 4 Release the mouse button at the desired depth followed by the release of the Ctrl key on the keyboard and the following system message will be activated Do you really want to RESIZE the interval from _ to _ Note Resizing a Rock Type will result in a resizing its associated bed restricted description category information i e Grain Size Porosity Grade and so on 5 Press the Esc key on the keyboard to exit from the Rock Type Builder window Deleting an Existing Rock Type or Bed 1 Double click on the Interpreted Lithol
239. y want to DELETE W Snap to Lithology This check box when activated will not allow spaces between beds on the Interpretive Lithology Layer when you are using the mouse not the keypad when entering Lithology Intervals This function utilizes the Mouse Screen Pointer Accuracy on the Selection bar and it you are within 10 times the accuracy the Interval will snap to the lithology already drawn on your log Edit Favorites This button allows the user to get to the System Options Favorites Tab The user would go into the Flack Favorites make their changes and then click on the button in the System Options window Toolbox This button allows the user to Turn on or off the Toolbox eel Once a Lithology interval has been defined or selected and can be viewed in the builder the user can click Interbeds Hutton to activate the Interbeds builder Accessory This button allows the user to switch to the Accessory builder so they can add accessories to the Rock type intervals they have defined in the Rock type builder TEM yg 855 SE RTE ss ca sand col Z The from and to fields are entered manually through the key board or can be activated through a mouse drag The rock type drop box will have all the rock types that are in the system Sample Quality m El The Sample quality further defines the lithology interval with either Questionable Questionable or Poor sample quality symbols as shown on the right No Data Description
240. yer Configuration or click on the E Layer Configuration button on the Toolbar to activate the Layer Configuration window or right click on the layer and select Edit options and then Edit Layer from the pop out menus 4 Click on the Curve Definitions tab 5 Click on the Curve List Button button This will activate a list of all the Curves that have been created for this well 6 Select the Curve you wish to display on this layer by double clicking on the desired Curve If selected the Curve List Button Curve Name will show in the field beside the button Click on the Save button or press ALT S when you are finished A system message will appear telling the user Record saved successfully Do you wish to Exit Click on co N Y l the a button to exit the window and view your changes How to change the Curve Attributes Curve and Units Null Value and Remarks oh Click once on the track containing the Curve layer to make the track active Highlighted in Green 2 Click on the Layer Selection List located on the Selection Bar top left corner and select the desired Curve layer contained within the currently active track that you wish to edit or make changes to 3 Right Click on the Layer and select Edit Options and then click on the Edit Layer selection or click on ES Edit pull down menu and select Layer Configuration or click on the Layer Configuration button on the Toolbar to activate the Layer Configuration wi
241. yhe 140m Ss aa 71450 Sh t gn It gy bk red brn mot aren amp sky ip ocely micmica stk 1451 Sits aa 145m Ss wh t ogy For py srt sbang sbrdd gtz mear fid tr lit grs abrit 750m Sh lt gy It gn ally calcs v sly amp aren stt sbfis 750m Ss It gy t brea tk gy brn F gr grdg slt w srt sbrdd gtz tr carb fk 755m Sh t gn It brn bk red sly calcs micmica occly sly aren sft bll 155m Ss aa 755m Anhy wh clr cy xin sft dns nyhe 160m No Sample 765m Anhy wh clr cy xin stt dns nyhe 765m Sh t gn It brn bk red mot ally calcs micmica sty amp sdy stt sbi 165m Ss lt gy t gn pk vf for m srt shang gtz com fld occ lit frags 770m Anhy aa 170m Ss aa 170m Sh aa 770m Dol kt gn It brn micel arg ip ocele sly p intel por 3 6 2 nwhe lf Transfer Depth Range Transfer Core Descriptions Lett Click to select 4 single annotation Hold the CTAL Kep down to select multiple annotations Hold the SHIFT Key down to select a range of annotations Select All Alternate Range Selection OF i me m LS E Cancel To transfer a single description Click on a Description to highlight the description in this window and then OF Los es click on the button This will place the description in the Lithology Summary Window Or to transfer multiple description Click on a Description in this window then hol

Download Pdf Manuals

Related Search

Related Contents

Notice to those consumers using this appliance with a GFI (Ground  Scarlatti Upsampler User Manual v1.2x  Makita DCS460 User's Manual    

Copyright © All rights reserved. Failed to retrieve file