pro sport manual iss2.p65
Contents
1. 1 CocingBlok 1 LnkRd 1 Secondary Safety Spring 1 Secondary Safety Block 1 Link Rodend 1 Link Rod Spring 1 Secondary Safety Block Spring 1 Front Link RodPin 1 Rear Link Rod Pin 1 Trigger Block Assy Ex Unit 1 PLEASE QUOTE THE RIFLE amp PART NUMBER IN ANY CORRESPONDENCE SOME PARTS ILLUSTRATED ARE ONLY AVAILABLEAS FACTORY FITTED ITEMS ONLY THE PARTS THAT ARE ON THE PARTS LIST ARE AVAILBLE FOR DIY FITTING Trigger Block Trigger Chassis Pin Trg Blk amp PiwBlk Ret Pin Trigger Chassis Bush Trigger Block Retaining Pin EE PLEASE QUOTE THE RIFLE amp PART NUMBER IN ANY CORRESPONDENCE SOME PARTS ILLUSTRATED ARE ONLY AVAILABLEAS FACTORY FITTED ITEMS ONLY THE PARTS THAT ARE ON THE PARTS LIST ARE AVAILBLE FOR DIY FITTING Lae p l Ten I m 1 VI yal E A s d TXx432 ENG UN M Ex 38 Gu En i ty Fan v p Fi Eg X281 431 L n5add Notes Air Arms Unit 6 Hailsham Industrial Park Diplocks Way Hailsham East Sussex England BN27 3JF Tel 01323 845853 Fax 01323 440573 Website www air arms co uk Email general air arms co uk 102. Pro Sport AIR ARMS World Class Air Rifles USERS HANDBOOK This handbook refers to all Pro Sport models PLEASE READ THIS MANUAL BEFORE USING YOUR NEW RIFLE ITCONTAINS IMPORTANT SAFETY INFORMATION AND INSTRUCTION ON ADJUSTMENT AND MAINTENANCE FELT OR SIMILAR CLEANING PADS MUST NOT BE FIRED FROM THIS RIFLE UNLESS A PELLET IS INSERTED BEHIND THE PAD ALTERNATIVELY CLEAN THE BARREL WITH A PULL THROUGH DO NOT FIRE THIS RIFLE WITHOUT A PELLET IN THE BARREL AND ONLY USE LEAD PELLETS THE SAFETY CODE 1 ALWAYS TREAT AN AIR RIFLE AS ID IT IS LOADED 2 NEVER POINT AN AIR RIFLE AT ANYONE EVEN IF IT IS NOT LOADED 3 NEVER LEAVE THIS A RIFLE UNATTENDED WHEN IT IS COCKED OR LOADED 4 ALWAYS BE SURE OF WHAT LIES BEYOND YOUR TARGET 5 ALWAYS CONDUST YOURSELF IN A SPORTMAN LIKE MANNER ALWAYS BE AWARE THAT YOUR ACTIONS WILL BE UNDER THE SCRUTINY OF OTHER MEMBERS OF THE PUBLIC WHO MAY NOT SHARE YOUR ENTHUSIASM FOR AIR WEAPONS BAD PRACTISES PROMOTE BAD PUBLICITY DO NOT JEOPARDISE YOUR FUTURE ENJOYMENT BY MISUSING THIS WEAPON THIS RIFLE HAS BEEN SET UP AND TESTED ON AIR ARMS PELLETS SEE BACK PAGE IF ANY OTHER MAKE OR TYPE OF PELLET IS USED THE RIFLE MUST BE RE TESTED TO ENSURE THE MUZZLE ENERGY IS WITHIN THE LEGAL LIMIT WARNING UNAUTHORISED DISASSEMBLY OF THIS RIFLE WILL INVALIDATE THE MANUFACTURERS WARRANTY PS ISS2 IMPORTANT INFORMATION PLEASE READ BEFORE LEAVING THE FACTORY THIS RIFLE WAS Q A INSPE
3. PROOF OF PURCHASE IS REQUIRED TO RECEIVE WARRANTY REPAIRS RETAIN YOUR PURCHASE INVOICE AND RETURN THE WARRANTY REGISTRATION CARD AS SOON AS POSSIBLE AFTER PURCHASE THE WARRANTY CARD MUST SHOW THE DEALER SUPPLIER NAME AND ADDRESS AND DATE OF PURCHASE WHAT IS COVERED REPLACEMENT PARTS amp LABOUR ON A BACK TO BASE BASIS RETURN TRANSPORTATION TO THE CONSUMER MAINLAND UK ONLY WHAT IS NOT COVERED TRANSPORTATION FROM TO CONSUMER TO AIR ARMS DAMAGE CAUSED BY MISUSE ABUSE LACK OF ROUTINE MAINTENANCE TRANSIT DAMAGE BETWEEN THE DEALER SUPPLIER AND THE CONSUMER OR UNAUTHORISED DISASSEMBLY PARTS SUBJECT TO NORMAL WEAR AND TEAR ANY OTHER CONSEQUENTIAL COST INCURRED BY THE CONSUMER RETURN TRANSPORTATION TO CONSUMERS OUTSIDE MAINLAND UK NO WARRANTY IS IMPLIED AS TO THE FITNESS FOR ANY PARTICULAR PURPOSE DO NOT STORE THIS RIFLE IN A DAMP PLACE SUCH AS GARDEN SHED OR GARAGE DO NOT STORE THIS RIFLE IN A PLASTIC OR PVC GUN BAG WITHOUT FIRST APPLYING A SURFACE CORROSION INHIBITOR NEVER LEAVE THIS RIFLE IN A COCKED CONDITION ALWAYS ENSURE THE COCKING LEVER IS FULLY CLOSED BEFORE FIRING DO NOT TEST FIRE THE RIFLE WITHOUT A PELLET IN THE BARREL AIR ARMS RESERVE THE RIGHT TO ALTER THE CONSTRUCTION APPEARANCE OR PERFORMANCE OF ANY PRODUCT WITHOUT PRIOR NOTIFICATION ALL ILLUSTRATIONS ARE FOR INFORMATION PURPOSES ONLY AND DO NOT NECESSARILY SHOW THE EXACT MODEL THAT WAS PURCHASED GENERAL MAINTENANCE REGULARLY CHECK THE TIGHTNESS
4. IN ONE HAND AND WITH THE OTHER PULL THE COCKING LEVER DOWNWARDS FIG 1 UNTIL THE TRIGGER MECHANISM ENGAGES AND THE SAFETY CATCH BUTTON POPS OUT THE BUTTON HAS AN INDICATION GROOVE COLOURED GREEN TO SHOW WHEN IT IS CORRECTLY ENGAGED BE SURE THAT YOU DO NOT OBSTRUCTED THE SAFTEY BUTTON AND PREVENT IT FROM WORKING DURING THE COCKING PROCESS IF YOU HOLD THE RIFLE BY THE PISTOL GRIP WHILST COCKING ENSURE THAT YOUR FINGER IS NOT ON THE TRIGGER FIG 1A OR YOU MAY ACCIDENTLY CAUSE THE RIFLE RO FIRE DURING THE LOADING SEQUENCE Fig 2 2 THE COCKING ACTION OPENS THE BREECH AND EXPOSES THE BARREL READY TO INSERT A PELLET FIG 2 ALWAYS CHECK THE SAGETY BUTTON BEFORE INSERTING A PELLET Fig 4 IN THE INTEREST OF SAFTEY ALWAYS KEEP A HOLD OF THE COCKING ARM WHILST INSERTING A PELLET FIG2A OPERATING INSTRUCTIONS CONT 3 AFTER INSERTING A PELLET CLOSE THE LEVER FULLY SERIOUS DAMAGE MAY RESULT IS THE RIFLE IS FIRED WITH THE LEVER PARTLY OPEN FIG 3 Fig 3 4 RELEASE THE SAFETY CATCH BY PUSHING THE BUTTON IN FULLY FIG 4 THE RIFLE IS NOW READY TO FIRE THE SAFETY CATCH CANNOT NOW BE RE ENGAGED WITH RE COCKING THE RIFLE SO IT IS BEST NOT TO RELEASE THE SAFETY CATCH BEFORE YOU AREREADY TO FIRE ONCE COCKED THE RIFLE CANNOT BE EASILY DE COCKED NEVER FIRE THE RIFLE WITHOUT A PELLET AS THIS MAY DAMAGE THE SEALS IF YOU HAVE LOADED AND CANNOT FIRE AT YOUR CHOSEN TARGET BUT WISH TO MAKE THE RIFLE SAFE FIRE THE PELLET
5. INTO SOFT GROUND TRIGGER ADJUSTMENT THE TRIGGER IS A TWO STAGE UNIT WITH ADJUSTMENTS ON BOTH STAGES BE AWARE THAT ADJUSTMENT TO ONE SCREW WILL AFFECT THE ADJUSTMENTS ON THE OTHER AND THE TRIGGER WILL ONLY WORK PROPERLY IF THERE IS THE CORRECT BALANCE BETWEEN THE TWO IF YOU HAVE NO EXPERIENCE IN ADJUSTING A TWO STAGE TRIGGER SEEK GUIDANCE OR LEAVE THE TRIGGER AS SET BY THE FACTORY INCORRECT ADJUSTMENT CAN MAKE THE RIFLE UNSAFE THERE ARE THREE ADJUSTMENT SCREWS 1 THE WEIGHT OF PULL SCREW WHICH IS LOCATED UNDER THE TRIGGER GUARD WHICH HAS TO BE REMOVED TO GAIN ACCESS TURNING THIS SCREW CLOCKWISE WILL INCREASE THE WEIGHT ON THE TRIGGER THE OTHER ADJUSTMENT SCREWS ARE IN THE TRIGGER BLADE THE REAR SCREW ADJUSTS THE EXACT PULL OFF POINT THE FRONT SCREW ADJUSTS THE LENGTH OF FIRST STAGE TRAVEL REMEMBER THAT SMALL ADJUSTMENTS WILL MAKE NOTICEABLE CHANGES TO THE OPERATION OF THE TRIGGER IMPORTANT NOTICE WHEN THE TRIGGER GUARD IS REPLACED THE REAR SCREW TX460 MUST BE TIGHTENED BEFORE THE FRONT SCREW TX 440 DO NOT OVERTIGHTEN THE FRONT SCREW THIS SCREW PULLS THE ACTION INTO THE STOCK AND ONLY NEEDS TO BE TIGHT ENOUGH TO STOP MOVEMENT WITHIN THE STOCK HAVE THE RIFLE SERVICED BY AIR ARMS OR ACOPETENT GUNSMITH AT LEAST ONCE A YEAR Cyliner Assembly 1 Secondary Safety Button 1 Cocking Lever Pin small 1 Cocking Lever Pin large 1 Secondary Safety Pusher 1 Gocking Ler 1 Compression Tube Assembly
6. CTED AND TEST FIRED USING AIR ARMS PELLETS TO CHECK OPERATION AND FINAL ADJUSTMENT IT WAS DISPATCHED IN A SEALED PURPOSE DESIGNED BOX WITH A CONTENTS LABEL ON THE LID AIR ARMS MAY NOT BE RESPONSIBLE FOR ANY DAMAGE TO THE CONTENTS OR MISSING ITEMS IF THE BOX IS NOT ORIGINAL IF IT IS DAMAGED OR THE SEALS ARE NOT INTACT AIR ARMS CANNOT BE HELD RESPONSIBLE FOR DAMAGE OR MISSING ITEMS DUE TO TRANSIT DAMAGE MISHANDLING OR BEING TAMPERED WITH AFTER LEAVING THE FACTORY IF THIS RIFLE IS NOT RECEIVED IN THE ORIGINAL BOX WITH THE SEALS INTACT PLEASE EXAMINE CAREFULLY FOR ANY DAMAGE MISSING TOOLS OR DOCUMENTATION IN THE FIRST INSTANCE ANY PROBLEMS OR COMPLAINTS REGARDING THIS PRODUCT SHOULD BE REFERRED TO THE SUPPLIER TO MAINTAIN THIS RIFLE INGOOD WORKING ORDER IT SHOULD BE SERVICED ANNUALLY BY A COMPETENT GUNSMITH YOUR SUPPLIER MAY BE ABLE TO PROVIDE THIS SERVICE OR CONTACT AIR ARMS A REASONABLE AMOUNT OF ADVICE WILL BE PROVIDED TO ENABLE THE END USER TO SERVICE THEIR OWN RIFLE HOWEVER THIS IS AT THE DISCRETION OF AIR ARMS AND MAY NOT BE GIVEN IN ALL CASES THE VELOCITY OF THIS RIFLE HAS BEEN SET USING AIR ARMS HUNTER PELLETS IFANY OTHER MAKE OR TYPE OF PELLET IS TO BE USED THE RIFLE MUST BE RE TESTED WITH THE PELLET THAT IS TO BE USED TO ENSURE THE MUZZLE ENERGY IS WITHIN THE LIMITS DETERMINED BY CURRENT LEGISLATION CONTACT YOUR SUPPLIER OR AIR ARMS FOR ANY ADVICE ON THIS MATTER CHECKING VELOCITY 1 Use a reliable chronograph to c
7. OF ALL FIXINGS DO NOT OVER TIGHTEN SOME PARTS ARE MADE FROM ALUMINIUM STRIPPED THREADS WILL RESULT FROM OVER TIGHTENING PERIODICALLY CLEAN THE BARREL WITH A GOOD CLEANER AND PULL THROUGH GENERAL LUBRICATION ONLY USE MINERAL BASED OILS AND NEVER USE SILICONE BASED OILS ON MOV ING PARTS REGULARLY APPLY A FEW DROPS OF GUN OIL THE FOLLOWING WEAR POINTS LINK ROD LINK ROD END amp COCKING LEVER PIVOTS COMPRESSION TUBE IT IS ESSENTIAL TO WIPE OVER THE EXTERNAL SURFACES OF THE RIFLE WITH A SOFT OILY RAG TO MAINTAIN THE HIGH SURFACE FINISH FAILURE TO DO THIS WILL RESULT IN SURFACE CORROSION REGULAR INTERNAL LUBRICATION IS NOT NECESSARY ASMALL AMOUNT OF GREASE IS APPLIED ON ASSEMBLY RE LUBRICATION WILL BE UN NECESSARY FOR A CONSIDERABLE TIME IF THE OPERATION OF THE RIFLE BECOMES ROUGH STIFF OR NOSIY THIS COULD BE AN INDICATION THAT LUBRICATION IS REQUIRED AND SHOULD BE INVESTIGATED PSISS2 GENERAL LUBRICATION cont DO NOT APPLY LUBRICANT TO THE BARREL SEALS OR ALLOW LUBRICANT TO PENETRATE TO THE PISTON SEAL AS DIESELING MAY RESULT DIESELING IS CAUSED BY OIL OR GREASE IGNITING WHEN IT IS COMPRESSED IN THE COMPRESSION TUBE WHEN THE RIFLE IS FIRED THIS PROCESS IS VERY DAMAGING TO THE SEALS AND SHOULD BE AVOIDED AT ALL COSTS A COUPLE OF DROPS OF OIL SHOULD BE APPLIED TO THE SAFETY CATCH REGULARLY TO ENSURE SAFE OPERATION PREFERABLY JUST BFORE A SHOOTING SESSION OPERATING INSTRUCTIONS 1 TO COCK THE RIFLE HOLD SECURELY
8. heck velocity the formula below requires the reading to be in feet per second FPS 2 Use fine measurement scales to weigh the pellet If scales are unavailable the pellet weight may be stated on the pellet container lid or contact the supplier The formula requires the weight to be in grains To convert from grams to grains multiply by 15 432 i e 0 69 grams x 15 432 10 65 grains 3 To find the muzzle energy in ft lbs use the formula FPSxFPSxGrains 450240 i e 700x700x 10 65 5218500 divide by 450240 11 59 CURRENT LEGISLATION LIMITS NON FAC HOLDERS TO AIR RIFLES WITH A MAXIMUM OF 12ft Ibs MUZZLE ENERGY WARNING IT IS A VERY SERIOUS OFFENCE TO BE IN POSSESSION OF AN AIR RIFLE THAT YOU ARE NOT CERTIFICATED FOR CONVICTION CAN RESULT IN CONFISCATION OF YOUR RIFLE A HEAVY FINE OR IMPRISONMENT EVEN A COMBINATION OF ALL THREE CAUTION THIS AIR RIFLE IS NOT A TOY AND MAY CAUSE DEATH OR SERIOUS INJURY IF MISUSED OR USED CARELESSLY READ ALLINSTRUCTIONS BEFORE USING THIS AIR WEAPON REQUIRES ADULT SUPERVISION IF THE USER IS UNDER 14 YEARS OLD THE SUPERVISOR MUST BE AT LEAST 21 YEARS OLD THE PURCHASER AND USER HAVE THE RESPONSIBILITY TO CONFORM TO ALL LAWS CONCERNING THE USE AND OWNERSHIP OF THIS AIR WEAPON PSISS2 LIMITED LIABILTY WARRANTY THIS PRODUCT IS WARRANTED TO THE RETAIL CUSTOMER FOR 12 MONTHS FROM DATE OF PURCHASE AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP AND IS TRANSFERABLE TO ANY SUBSEQUENT OWNER
Download Pdf Manuals
Related Search