Model No. ST300-S/SM and ST300-S/SM-T SLOW
Contents
1. a detent at 100 play speed OR 0 100 with a detent at 100 For Wheel only Press Softkey SPDRANGE to select SLOMO speed ranges Press Softkey to select 0 gt 200 OR 100 gt 200 Press Softkey BACK to return to SLOMO MENU Press ESC to exit SETUP MENU OR turn the wheel to select another item For Wheel only Press Softkey PRSET to select the SLOMO Preset Speed Mode Press Softkey UPDATE When exiting SLOMO mode the last used speed is saved in the Preset Speed register Press Softkey STATIC The Preset Speed register is NOT updated when exiting SLOMO mode It is only changed by SHIFT SLOMO PRESET SLOMO 6 ST300 S SM TBAR Press Softkey ON to enable slomo to be engaged by moving the TBAR AUTOENABLE WHEEL Press Softkey JOG or SHUTTLE to enable that function to be engaged AUTOENABLE by turning the wheel GANG Press Softkey to select PERMANENT GANG described in the MODE FUNCTION Table or TEMPORARY GANG In TEMPORARY mode press and hold the VTR key that you want to read status from then press the VTR s of those VTRs that you want to include in the gang Release the keys The LED on the monitored VTR blinks all other VTRs in the gang stay on constantly To break the temporary gang press any VTR key SEARCH Press Softkey to select ST300 VTR to control the search speed of the SPEED VTR Either the ST300 or VTR mode will be faster HINT Select VTR mode if you will be controlling multip2. exit without searching FREEZE FREEZE Toggles the Freeze on off When the light is ON ENABLE the Freeze is enabled When the light is OFF the freeze is disabled NOTE this is NOT a REC OUT freeze it IS a user defined Freeze FREEZE SHIFT FREEZE To enter or mark the Freeze time press SHIFT Active in SLO MO FREEZE The display shows the current freeze only time You can enter the Freeze time using the numeric keypad or MARK the current time into the Freeze time by pressing MARK FREEZE ON Active in SLO MO In SLO MO mode STILL frame the VTR when the LAST GOOD only current timecode is within 6 frames of the last VIDEO Record Out point memorized automatically upon exiting Record mode Enable disable or clear the FREEZE point from SETUP MENU see MENU GOTO CUE or Search the VTR to the contents of the currently ENTERED displayed Cue Point If ENTER TIME is active TIME LED is on search the VTR to the entered time To enter a GOTO location without altering the contents of the Cue Point Press ENTER TIME Enter the desired timecode number using the numeric keypad Press GOTO to search to the entered time Press ESC to exit without searching SHIFT VTR 1 Press and hold the SHIFT key and press the key OR of the VTR whose status you want to monitor The SHIFT VT R 2 LED above the VTR key starts blinking Release OR the SHIFT key and the VTR key The light SHIFT VTR 3 continues blin
3. 12843 Foothill Blvd Suite D Sylmar 91342 818 898 3380 voice D ee 818 898 3360 fax info dnfcontrols com www dnfcontrols com CONTROLS Model No ST300 S SM and ST300 S SM T SLOW MOTION CONTROLLER USER MANUAL 1 ST300 S SM Table of Contents SECTION CONTENTS PAGE 1 35245585 3 Getting Started 2 INS TA LLA TION wississcsnssncdscssecnssssessocscessedseorvonsseses 3 Cue Record 4 SETUP MENU svsscscstsstssssvcbacseccecsuecsassssssecosessesuetacs 5 FUNCTION 2 Advanced Features 6 TRANSFERRING 5 Reference 7 5 6 525252555252 Software 101900 Manual 3 1 122900 Document 1 ST300 SSM_User_Manual doc 20 0300 0001 2 51300 5 5 1 DESCRIPTION Slow Motion Controller that you can configure for the way you work Controls up to 4 VTRs T BAR or d
4. dapter supplied with IEC connector L x W x H 12 x 6 x 1 5 front 3 0 rear T Bar unit is 12 6 wide 4 165 VTRI VTR2 VTR3 VTR4 DB9F GPI DBFI5F Power DB9M Aux DB9F Reference Video BNC Easy to read 2 line back lit LCD display User adjustable contrast With mechanical detents Slo mo 0 200 of Play Speed RS422 SERIAL CONNECTOR 9 Pin D type female DB9F Pin 1 Frame Ground Receive A Transmit gt gt Spare Transmit Common 6 Receive Common 7 Receive 8 Transmit A gt 9 Frame Ground POWER CONNECTOR 9 Pin D type male DB9M Pin 1 5v DC 6 5 VDC 2 5v DC 7 Ground 3 Ground 8 Ground 4 12 VDC 9 Ground 5 12 VDC AUX PORT RS422 SERIAL CONNECTOR 9 Pin D type female Pin 1 Frame Ground 6 Transmit Common 2 Receive 7 Receive B 3 Transmit B gt 8 Transmit A gt 4 Receive Common 9 Frame Ground 5 Spare Note Aux Port is not programmed in this model GPI IN OUT CONNECTOR 15 Pin D type female DB15F Pin Description Function 11 ST300 S SM 1 GPI 1 Out PLAY tally out 9 GPI 1 In PLAY 2 GPI 2 Out STILL STOP tally out 10 GPI 2 In STILL STOP 3 GPI 3 Out RECORD tally out 11 GPI 3 In RECORD 4 GPI4 Out REWIND tally out 12 GPI 4 In REWIND 5 GPI 5 Out FFWD tally out 13 GPI 5 In FFWD 6 GPI 6 Out SLOMO tally out 14 GPI 6 In SLOMO 7 GPI 7 Out 15 GPI 7 In 8 Ground 7 ODO OO OO OO OOo OOD Of T K
5. etented Wheel for Fast and Easy slomo ing 0 200 or 100 to 200 of Play speed Quickly and easily store and recall 400 Cue Points 100 per VTR All Cue Points are retained when power is off Fast and Easy to search to a Cue Point manually entered Timecode number or Record out Point Set Preroll duration from one frame to one hour DEFINITIONS Throughout this document VTR DDR VDR amp Video Server will be referred to collectively as VTR Q The ST300 S SM as the ST300 Words surrounded by brackets for example ENTER are keys on the ST 300 XXX XXX means hold the two keys down simultaneously GETTING STARTED 2 INSTALLATION 1 Plug one end of a 9 conductor RS422 serial cable in to the 9 pin connector on the rear of the SLOW MOTION CONTROLLER Plug the other end of the cable into the 9 pin remote connector on the VTR 2 Plug the POWER SUPPLY into a wall outlet 90 VAC 240 VAC Select REMOTE mode on VTR s front panel 4 Check the SETUP MENU prior to using the Slow Motion Controller to confirm proper Record mode SLO MO speed range and other User settable modes Connection Diagram VTR DDR POWER GPI IN OUT Reset PIN 1 PIN PGND POWER SUPPLY Note The Reference Video connector is not programmed in this model 3 ST300 S SM LCD DISPLAY During normal operation the top row of the display shows the selected time mode and cu
6. frame VTR Press again to put VTR into STOP mode Press to toggle between Timecode TC VITC SELECT VT or Tape Timer TM display modes EJECT SHIFT Eject tape from VTR REWIND TIME SHIFT Press to enter Time Preset PRESET TIME MODE Press ENTER to load Time Generator with Generator 00 00 00 00 Preset OR enter the time desired via the numerical keypad and press ENTER to load that time OR press ESC to exit without saving 9 ST300 S SM 6 TRANSFERRING CUELIST The TRANSMIT CUELIST function allows you to transmit your list of Cue Points to a PC using the provided utility software on the PC or to another ST300 To Transmit Cue Points to the ST300 1 Connect the VTR 4 connector on the rear of the 51300 to the VTR4 connector of the receiving ST300 using an RS422 9 pin cable with TX and RX lines crossed A turnaround cable 2 Press MENU 3 Scroll the wheel until Transmit CUE List YES Enter Exit ESC is displayed 4 Press ENTER to start transmitting The Display shows Waiting to transmit on the first line 5 When the Receiver is ready transfer starts automatically The Display now shows Transmitting cuelist 6 After the transfer is over the display shows Transfer is over for one second and then shows Waiting to transmit again 7 Connect another ST300 to transmit the list again OR 8 Press ESC twice to exit the MENU mode To Transmit Cue Points
7. ic from the bottom of the display to the Softkey 5 Press ESC to exit the MENU The MENU key indicator will turn off OR Turn the Wheel to for other setup options 4 SETUP MENU 1 Press MENU The MENU key indicator will turn on Turn the Wheel to select item to change 2 Use the Softkeys to change the desired mode for that option Turn Wheel at any time to select another item 3 Press ESC at any time exit SETUP MENU The MENU key indicator will turn off MODES Turning Wheel clockwise 5 ST300 S SM RECORD MARK Q WIND MODE SLOMO WITH Press MENU key to Select the desired record mode Lockout Assemble Crash Full or Insert Only in INSERT mode Press the associated Softkey located below the display to toggle Video V Audiol A1 Audio2 A2 Audio3 A3 Audio4 A4 on off Press Softkey to Enable ADVANCE to next Cue Point when MARK is pressed OR maintain CURRENT Cue Point when MARK is pressed Press Softkey to select HOLD fast wind is maintained only while key is pressed OR LATCH fast wind is initiated and maintained with momentary key press Select fast wind speed 3 9 to 23 7 by pressing Softkey below SPD ST300 display shows SLOMO with WHEEL Non T Bar version SpdRange Piati ST300 display shows T Bar version SLOMO with TBAR Wheel SpdRange Preset Press Softkey TBAR or WHEEL to toggle between T BAR and WHEEL The T BAR has two speed ranges 0 200 with
8. king Press the VTR s for the other OR VTRs to include in the Gang Their lights come on SHIFT VTR 4 and stay on constantly Press ESC to exit 8 ST300 S SM GOTO SHIFT GOTO Search VTR to FREEZE point last Record Out FREEZE point POINT FFWD FFWD Press and HOLD to shuttle Release key to stop Set WIND Speed in MENU JOG Select JOG mode and enable the Wheel LAST CUE LAST CUE Step to the previous Cue Point Location MARK CUE MARK Save the current time in the currently displayed Cue POINT Point Per SETUP MENU see MENU Function the Cue Point Location will advance to the next Cue Point location or remain the same NEXT CUE NEXT CUE Step to the next Cue Point Location displayed Cue Point PREROLL SHIFT Enter desired Preroll Value Press ENTER to VALUE PREROLL save entry OR press ESC to exit without saving entry RECORD REC Places VTR in the Record mode selected by RECORD MODE in the SETUP MENU see MENU One button record Set WIND Speed in MENU SHUTTLE SHUTTLE Select SHUTTLE mode and enable the Wheel SLOMO SLOMO Press SLOMO to slo mo the VTR Turn the wheel or move the T Bar to change the play speed Press SLOMO to STILL frame OR press any transport key to exit SLO MO SHIFT SLOMO For WHEEL ONLY Press SHIFT SLOMO SPEED to preset the slo mo speed Turn wheel to select PRESET desired speed Press ESC or any transport key to exit Press once to STILL
9. le VTRs Select ST300 if you will be controlling older VTRs ST300 ST300 SETUP SETUP Clear Cues SetDefault Press Softkey beneath ClearCues to clear all Cue Points to 00 00 00 00 Press Softkey YES when asked Are You Sure Press Softkey beneath SetDefault to set ST300 to default settings Press Softkey YES when asked Are You Sure DISPLAY version number for the currently installed software is SOFTWARE displayed VERSION DROP Press Softkey to select DROP FRAME ON or OFF FRAME Used in conjunction with Timecode Generator preset RECORD Press Softkey to select single button or 2 button record RECORD REC Only OR RECORD REC PLAY FREEZE Press Softkey to enable or disable FREEZE at Record Outpoint Changing mode automatically clears FREEZE point TRANSMIT Transmits Cuelist to another ST300 or to a PC CUELIST RECEIVE Receives Cuelist from another 51300 or a PC CUELIST 7 ST300 S SM 5 FUNCTION TABLE EE On Off Toggle EE mode on off Status indicator is on when EE is on ENTER TIME ENTER TIME To manually entered timecode numbers into the currently displayed Cue Point Enter the desired timecode number using the numeric keypad Press ENTER to save your entry OR ESC to exit without saving To enter a GOTO location without altering the contents of the Cue Point enter the desired timecode number using the numeric keypad Press GOTO to search to the entered time Press ESC to
10. nter a time on the numeric keypad Press ENTER to save the entered time OR 4 Press ESC to exit without saving The ENTER TIME key indicator will turn off A ST300 S SM GOTO PREROLL TO A CUE POINT 1 Select the desired Cue Point The Cue number and its contents are shown on the bottom line of the display Press GOTO to search to the Cue Point the GOTO key indicator will turn on When the VTR reaches the Cue Point time the GOTO key indicator will turn off Press PREROLL to preroll to the Cue Point The PREROLL key indicator will turn on When the VTR reaches the Cue Point time the PREROLL key indicator will turn off GOTO PREROLL TO A MANUALLY ENTERRED TIME 1 Press ENTER TIME to manually enter a time using the numeric keypad The ENTER TIME key indicator will turn on 2 Manually enter a time on the numeric keypad 3 Press GOTO OR PREROLL to search to the entered time OR 4 Press ESC to exit without searching The ENTER TIME key indicator will turn off RECORD MODE SELECTION 1 Press MENU The MENU key indicator will turn on 2 Turn the wheel until REC is viewed on the top line of the display The current Record mode is shown 3 Press the MENU key to select Record Lockout Assemble Crash or Insert Record mode 4 INSERT ONLY Press the desired Softkey to toggle Video Audiol Audio2 Audio3 or Audio4 record on off The Softkeys are located just below the display Follow the line graph
11. oa KK gt gt 1 gt O
12. rrent time location of the selected VTR For example TM 01 12 09 23 Time Modes TM Tape Timer TC LTC VT VITC The currently selected SLO MO speed is displayed on the far right side of the top row The bottom row of the display shows the current Cue Point number and its contents 3 OPERATION Select the desired transport function by pressing the appropriate switch on the SLOW MOTION CONTROLLER The Real Time Status Indicators will light to indicate the VTR s current tape transport mode For example Pressing PLAY will put the VTR into the PLAY mode The PLAY Status Indicator will turn on when the VTR is in PLAY mode Press RECORD OR RECORD PLAY to put the VTR into Record mode see SETUP MENU NOTE The VTR will not go into Record mode if Record Inhibit is enabled on the VTR or tape cassette Check SETUP MENU prior to using the SLOW MOTION CONTROLLER to confirm proper Record mode and other User settable modes CUE POINTS SELECT A CUE POINT 1 Press NEXT CUE or LAST CUE to step through the Cue Points OR Manually enter the desired Cue Point number using the numeric keypad 2 The current Cue Point number and its contents will be shown on the second line of the display MARK ENTER EDIT A CUE POINT 1 Press MARK to mark the VTR s time into the Cue Point You are done OR 2 Press ENTER TIME to manually enter a time using the numeric keypad The ENTER TIME key indicator will turn on 3 Manually e
13. to the PC 1 Connect the VTR4 connector on the back of the ST300 to one of the COM ports on the PC using a RS422 to RS232 adapter Repeat steps 2 8 of the TRANSMIT CUE POINTS to the 51300 section RECEIVE CUELIST FUNCTION The RECEIVE CUELIST function allows you to receive your list of Cue Points from a PC or from another ST300 To Receive Cue Points from the ST300 1 Connect the VTR4 connector the back of the 51300 from the VTR4 connector of the transmitting ST300 using RS422 9 pin cable with TX and RX lines crossed A Turnaround Cable 2 Press MENU Scroll the wheel until Receive CUE List YES Enter Exit ESC is displayed 4 Press ENTER from start receiving The Display shows Waiting to receive on the first line 5 When the Transmitter is ready transfer starts automatically The Display now shows Receiving cuelist 6 After the transfer is over the display shows Done Success Press any key 7 Press any key The display shows Receive 517 message 8 Press ESC to exit the MENU mode To Receive Cue Points from the PC 1 Connect the VTR4 connector on the back of the ST300 to one of the COM ports on the PC using RS422 to RS232 adapter 2 Repeat steps 2 8 of the RECEIVE CUE POINTS from the ST300 section 10 ST300 S SM 7 SPECIFICATIONS Power Size Weight Real Panel Connectors Display Jog Shuttle Wheel Optional 90 VAC to 265VAC a
Download Pdf Manuals
Related Search