Qnn Safe Product User Manual
Contents
1. QNN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www qnnsafe com au Email info qnnsafe com au Phone 02 87982669 E After the Holding is activated there is no way to de activate the Holding within HOLD x the 15 minutes period then displayed to indicate the remaining holding time in minutes Using MAGNETIC STRIPPED CARD E Press Al then swipe the card from right to lift Please face the magnetic strip down E OPENED displayed with 2 beeps then the safe is unlocked Closing instructions You need to enter your PERSONAL CODE or swipe your Card to lock the safe This code or card will be the keys for next opening Using PERSONAL CODE E Close the door E Input 4 6 digits PERSONAL CODE Could be the old code or a new code E CLOSED displayed with 2 beeps then the safe is locked Using MAGNETIC STRIPPED CARD E Close the door E Press Al then swipe the card from right to lift Please face the magnetic strip down E CLOSED displayed with 2 beeps then the safe is locked Emergency Backup In an emergency saturation safe can be opened by the Emergency key Override the digital lock To expose the key hole you need to screw off the little metal button on the door front Then turn the master key counter clockwise to unlock the safe You need to reset a new code after open the safe using Emergency Key To reset the code Keep the Emergency key a2. QNN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www qnnsafe com au Email info qnnsafe com au Phone 02 87982669 QNN Safe USER S MANUAL FOR MC CREDIT CARD SAFE SERIES Serial Number 000000 000000 This package contents User manual 1 External Battery Box 4 Bolt Down Screws 4 AA Batteries 2 Emergency backup Keys Please contact your retailer or Qnn Safe Australia P L if any shortage occurred For the first time use it needs the external battery power support Insert the supplied 4 AA batteries into the External Battery Box Connect the power to the front panel The power inlet is located on the bottom side of the Key Pad panel After the safe is opened please replace the batteries into the internal battery box which is located behind the door plate Safe can be opened by swiping the registered MAGNETIC STRIPPED CARD Ex Personal ID cards or most major credit cards Or by entering personal digital code After swipe the Card or after enter the right code Safe is now unlocked The factory setting for the digital code is 1 23 45 6 Opening instructions Using PERSONAL CODE E Input 4 6 digits PERSONAL CODE Factory setting 123456 E OPENED displayed with 2 beeps then the safe is unlocked Displayed with 3 beeps means it is a wrong code try 3 continual wrong code tries will be held for 15 minutes Page 1 of 2
3. t counter clockwise position Input 4 6 digits new PERSONAL CODE Press Al CLOSED then displayed with 2 beeps and then LO BAT displayed which indicate that the new code is set successful Close and lock the door by removing the Emergency Key Using the New Code to unlock the safe and remember the New Code Cautions Do not store the Emergency Keys and the External Battery Box inside the safe When the LO BAY display with 3 beeps it means that the batteries need to be replaced Please replace new batteries as soon as possible Page 2 of 2
Download Pdf Manuals
Related Search