Home

VIZIO D28h-C1 LED HDTV User Manual

1. Position Opens a sub menu with two To adjust the More Picture settings settings cd e Picture Size increases or decreases the vertical and E Aie Miss VIZIO a poten nel ee of ne displayed pietu re highlight More Picture and press MORE PICTURE Picture Position adjusts the vertical and horizontal OK The MORE PICTURE menu is Color Temperature Cool positions of the picture to ensure the image is centered displayed Black Detail iow and completely fills the screen Use the Left Right Arrow Backlight Control on buttons to adjust the horizontal position of the displayed 2 Use the Arrow buttons to highlight Reduce Signal Noise tow picture Use the Up Down Arrow buttons to adjust the the setting you wish to adjust then E ES ae vertical position of the displayed picture Press the OK press Left Right Arrow buttons to button when you are finished Game Low Latency Off change Picture Size amp Position e Film Mode Optimizes the picture for watching film Select the setting Film Mode Auto Auto or Off Color Temperature comma ae Gamma Sets the shape of the gamma curve Use lower See Adjusting the Color values for bright room conditions and higher values when it Temperature on page 24 is dark Select 1 8 2 0 2 1 2 2 or 2 4 e Black Detail Adjusts the average brightness of the picture to compensate for large areas of brightness Select Off Low Medium or High Backlight Control Dynamically improves the contras
2. CLEARANCE FACTORY RECERTIFIED or by a non authorized reseller THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE VIZIO S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO S NEGLIGENCE ALLEGED DAMAGE OR DEFECTIVE GOODS WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE LOSS OF INFORMATION OR DATA COMMERCIAL LOSS LOST REVENUE OR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM PROVINCE TO PROVINCE THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE CHECK www vizio ca FOR THE MOST CURRENT VERSION Personal Data Ifyour VIZIO productis capable of storing personal data and other information ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE COURSE OF SOME IN HOME AND ALL SHIP IN WARRANTY SERVICE If this occurs your product will be restored to you configured as originally purchased You will be responsible for restoring all applicable data and passwords Recovery and reinstallation of user data is not covered under this Limited Warranty In order to protect your p
3. Changing the Appearance of Digital Closed Captions Digital closed captions can be displayed according to your preference See the diagram on the next page for an explanation of the parts of the closed caption area To change the appearance of digital closed captions 1 From the CLOSED CAPTIONS menu use the Arrow buttons to VIZIO a highlight Digital Caption Style DIGITAL STYLE and press OK Caption Style Custom Text Style As Broadcas 2 Use the Left Right Arrow Tex Size aes buttons on the remote to select rs EA Digital Style gt Custom The ee rennes DIGITAL STYLE menu appears as Toa Eeke Rai shown Text Edges Color As Broadcas 3 Use the Up Down Arrow Background Color Black buttons on the remote to Background Opacity As Broadcas highlight the setting you wish to Wineow Celer As Broadcas change then use the Left Right ieee As Broadcas Arrow buttons to change the setting e Caption Style Choose As Broadcast to keep default settings or Custom to manually change each setting e Text Style Changes the font used for the closed captioning text e Text Size Makes the text larger or smaller e Text Color Changes the color of the text e Text Opacity Changes the transparency of the text e Text Edges Change the effects at the edges of the text such as raising the edges or adding drop shadows e Text Edges Color Change the color at the edges of the text Background Color Change the color of the backgro
4. OK Select the highlighted menu option BACK Go to the previous on screen menu VOLUME UP DOWN Increase or decrease loudness of the audio MUTE Turn the audio off or on NUMBER PAD Manually enter a channel WIDE Switch the display mode POWER Turn TV on or off MENU Display the on screen menu ARROW Navigate the on screen menu GUIDE Display the info window V BUTTON Open the USB photo viewer CHANNEL UP DOWN Change the channel LAST Return to the channel last viewed DASH Use with number pad to manually enter a digital sub channel For example 18 4 or 18 5 REMOTE CONTROL Replacing the Batteries 1 To remove the battery cover press on the logo and slide the cover out 2 Insert two batteries into the remote control Make sure that the and symbols on the batteries match the and symbols inside the battery compartment 3 Replace the battery cover 11 CONNECTING A DEVICE Your TV can be used to display output from most devices 1 Verify that your device has a video port that matches an available port on the TV HDMI 1 HDMI 2 Comp etc 2 Turn the TV and your device off 3 Connect the appropriate cable not included to the TV and the device 4 Turn the TV and your device on Set the TV s input to match the connection you used HDMI 1 HDMI 2 Comp etc Pb Cb YN L COMPOSITE GOOD COMPONENT BACK OF TV 12 Cable Sa
5. Port row and press OK b Highlight the input name you want to use and press OK To enter a custom name a Enter your custom name using the on screen keyboard b Highlight OK and press OK c The Input Name changes to show the custom name that you created When you have finished naming your input press the EXIT button on the remote 40 Input Port VIZIO A NAME INPUT HDMI 1 DVD be Input Name DVD_ e Custom Name a b cid elf g md jikK li im n o p qi r s tfujv w x y z 0 ELIAS ARA ESTACA ASA ES 8e Space lt lt OK Cancel Select the input name from a list of common device names Blu ray Cable Box DVD etc NW CHANGING THE TV SETTINGS Using the system menu you can View technical system and networking information Change the on screen menu language Set the time zone and local setting Open the WIDE menu Set up parental controls Set up CEC devices to control them with your VIZIO TV remote Control when the power indicator light is on Reset TV settings and control Smart Interactivity VIZIO A lt SYSTEM System Information Menu Language English Time amp Local Settings Wide Parental Controls CEC Power Indicator Off Reset amp Admin 41 Viewing System Information To view technical data and status information about your TV and network connection 1 Press the MENU button on the remote The on screen menu is
6. Setting the Auto Power Off Feature To help save energy your TV is set by default to turn off after 10 minutes without a video or audio signal This feature can be deactivated To set the Auto Power Off feature VIZIO A lt TIMERS Sleep Timer Off Auto Power Off 10 minutes 3 NW 22 From the TIMERS menu use the Up Down Arrow buttons on the remote to highlight Auto Power Off Use the Left Right Arrow buttons on the remote to change whether the TV will turn off If you don t want the TV to turn off when there is no signal change the setting to Off Otherwise select 10 minutes When you have finished setting the auto power off time press the EXIT button on the remote SETTING UP CHANNELS You can use the TV s Tuner menu to e Select a channel source e Find channels Perform a partial channel scan e Manually add channels Select channels to skip Select language for analog and digital channels VIZIO 1 CHANNELS Channels not scanned Channel Source Find Channels Partial Channel Search Add Analog Channel Skip Channel Analog Audio Digital Language Cable Stereo English 34 Selecting a Channel Source 1 On the remote control press Input and use the Arrow button to highlight TV antenna icon then press OK Press the MENU button select Channels and press OK The CHANNELS menu is displayed On the CHANNELS menu highlight Channel Source and using the left right Arrow buttons
7. To Channel and enter the channel where you want to end the scan Use the Left Arrow button to backspace Use the Number Pad on the remote to enter the channel Highlight Start and press OK The partial channel search begins Wait until the partial channel search is 100 complete Highlight Done and press OK Press the EXIT button on the remote 35 To add a single new analog channel A From the CHANNELS menu highlight Add Analog Channel and press OK The ADD ANALOG CHANNEL menu is displayed Highlight Enter Channel and use the Number Pad on the remote to enter the number of the channel you are adding Highlight Add Channel and press OK The TV scans for the channel When the TV is done scanning for the channel press the EXIT button on the remote VIZIO A ADD ANALOG CHANNEL Enter Channel C Add Channel xy Skipping Channels After a channel scan is completed you may find that some channels are too weak to watch comfortably There may also be some channels you do not want to view You can remove these channels from the TV s memory with the Skip Channel feature Channels that have been removed with the Skip Channel feature can still be viewed if the channel is entered A using the Number Pad If you wish to completely block a channel from being viewed use the parental controls See Locking and Unlocking Channels on page 44 To remove a channel 1 From the CHANNELS menu highlight Skip Chann
8. Tuner menu use the Arrow buttons to highlight Color Tuner and then press the Left Right Arrow buttons until the Ramp Test Pattern menu is displayed lt Ramp Test Pattern gt Off Use the Arrow buttons on the remote to highlight Off Use the Left Right Arrow buttons to select the color for the ramp test pattern Selecting a color immediately shows that color ramp To hide the Ramp Test Pattern use the Left Right Arrow buttons to highlight Off When you are finished press the BACK button to adjust additional settings or EXIT ADJUSTING THE AUDIO SETTINGS Adjusting audio settings creates a custom audio mode which can be further modified or restored to factory defaults deleted To adjust the audio settings 1 Press the MENU button on the remote The on screen menu VIZIO A is displayed AUDIO TV Speakers On 2 Use the Arrow buttons on the SUNE SONE On remote to highlight Audio and Volume Leveling On press OK The AUDIO menu RE aa 0 is displayed Lip Syne O 3 Use the Arrow buttons to Elena SAS FER Analog Audio Out Fixed highlight the setting you wish to adjust then press Left Right Arrow buttons to change the setting e TV Speakers Turns the built in speakers on or off Equalizer Delete Audio Mode 3 When the TV speakers are set to On DTS signals cannot a AY be passed through digital audio outputs e Surround Sound Surround sound uses DTS TruSurround to deliver an immersive sur
9. an asterisk appears after its name e The custom picture mode is not automatically saved To save a custom picture mode a From the PICTURE MODE EDIT menu use the Arrow buttons to highlight Save Picture Mode and then press OK The SAVE PICTURE MODE menu is displayed Use either the on screen keyboard to type a name for your custom picture mode Highlight Save and press OK Press the EXIT button to exit the menu screens VIZIO SAVE PICTURE MODE Custom1_ l fy Na kb m s t u v 1121314 4 8el Save als 3o x o Space lt so Q N e QQ roa 25 Locking and Unlocking Custom Picture Modes Custom picture modes can be locked unlocked with a unique PIN to prevent accidental changes to their settings To lock all custom picture modes il To unlock all custom picture modes a From the PICTURE MODE MANAGEMENT menu use the Arrow buttons to highlight Lock Picture Mode and then press OK The LOCK PICTURE MODE menu is displayed Use the Number Pad on your remote to enter a unique 4 digit PIN Highlight Save and press OK Press the EXIT button to exit the menu screens From the PICTURE MODE MANAGEMENT menu use the Arrow buttons to highlight Unlock Picture Mode and then press OK The UNLOCK PICTURE MODE menu is displayed VIZIO A LOCK PICTURE MODE Create a picture control PIN to prevent change to all custom picture modes Sa
10. displayed Use the Arrow buttons on the remote to highlight System and press OK The SYSTEM menu is displayed Highlight System Information and press OK Use the Up Down Arrow buttons to scroll through the system information When you are finished reviewing the system information press the EXIT button on the remote Changing the On Screen Menu Language Your TV can display the on screen menu in different languages To change the on screen menu language 1 Press the MENU button on the remote The on screen menu is VIZIO displayed lt MENU LANGUAGE English 2 Use the Arrow buttons on the Espa ol remote to highlight System and Francais press OK The SYSTEM menu is displayed 3 Use the Arrow buttons on the remote to highlight Menu Language and press OK The MENU LANGUAGE menu is displayed 4 Highlight your preferred language English Espa ol or Fran ais and press OK 5 Press the EXIT button on the remote 42 Setting the Time and Local Settings To ensure the correct time is displayed when you press the INFO button set the TV s time zone 1 Press the MENU button on the VIZIO A remote The on screen menu is displayed lt Nov 06 2014 12 44 PM Time Zone Alaska 2 Use the Arrow buttons on the Daylight Saving Time Off remote to highlight System and press OK The SYSTEM menu is displayed 3 Use the Arrow buttons on the remote to highlight Time amp Local Settings and press O
11. modes to save groups of picture settings To adjust the Picture Mode Edit settings 1 From the PICTURE menu use the Arrow buttons to highlight Picture Mode Edit and then press OK The PICTURE MODE EDIT menu is VIZIO A PICTURE MODE EDIT Calibrated Save Picture Mode displayed Lock Picture Mode Reset Picture Mode Calibrated 2 Usethe Arrow buttons to highlight an option then press OK Save Picture Mode Save the picture mode settings as a new custom picture mode VIZIO PICTURE MODE EDIT My Settings Save Picture Mode e Lock Picture Mode Prevent changes to custom picture Unlock Picture Mode modes Delete Picture Mode My Settings e Unlock Picture Mode Allow changes to custom picture modes Reset Picture Mode Reset the picture mode settings to the factory default values e Delete Picture Mode Delete a custom picture mode Inputs assigned to that custom picture mode will be set to Calibrated picture mode Ye If you ve changed the settings for a picture mode an A asterisk appears after its name t Only available when the current picture mode is a pre set mode tt Only available when the current picture mode is a pre set mode and some of its settings have been changed 24 Saving a Custom Picture Mode Custom picture modes allow you to Save a group of custom settings for various viewing conditions and video sources e When changes are made to a preset picture mode
12. only covers defects in materials and workmanship This warranty does not cover for example cosmetic damage normal wear and tear improper operation improper voltage supply or power surges signal issues damages from shipping acts of God any type of customer misuse modifications or adjustments as well as installation ow and set up issues or any repairs attempted by anyone other than by a VIZIO authorized service center Products with unreadable or removed serial numbers or requiring routine maintenance are not covered This one year limited warranty does not cover Products sold AS IS FACTORY RECERTIFIED or by a non authorized reseller THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE VIZIO S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO S NEGLIGENCE ALLEGED DAMAGE OR DEFECTIVE GOODS WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE LOSS OF INFORMATION OR DATA COMMERCIAL LOSS LOST REVENUE OR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL O
13. purchased You will be responsible for restoring all applicable data and passwords Recovery and reinstallation of user data is not covered under this Limited Warranty In order to protect your personal information VIZIO Sales amp Marketing M xico S de R L de C V recommends that you always clear all personal information from the unit before it is serviced regardless of the servicer Limited Warranty ZERO BRIGHT PIXEL DEFECT GUARANTEE This policy covers zero bright pixel defects for the duration of the limited ONE YEAR WARRANTY on select new product purchases To determine if this guarantee applies to your product refer to the DETAILS tab of the model s product information page www vizio com es mx or look for the zero bright pixel guarantee on the box INFORMATION EXCLUSIVELY FOR MEXICO VIZIO Sales amp Marketing M xico S de R L de C V is not obligated to honor the warranty in the following cases a When the Product has been used under other than normal conditions b When the Product has not been operated according to the accompanying instructions for use c When the Product has been altered or repaired by persons not authorized by VIZIO Sales amp Marketing M xico S de R L de C V or the respective seller You may contact the importer or the merchant from whom you purchased the VIZIO Sales amp Marketing M xico S de R L de C V Product to make a warranty claim to obtain informat
14. supported file extension jpg or jpeg e The USB media player is not designed to play media from external hard drives MP3 players cameras or smartphones 50 Displaying USB Media To display your USB media 1 Connect your USB thumb drive to the USB port on the side of the TV 2 Use the Arrow buttons to highlight Yes and press the OK If the dialog box disappears press the V button on the remote to go the next step 3 Use the Arrow buttons to highlight your USB device in the list and press OK 4 Use the Arrow buttons to highlight Photo and press OK 5 Use the Arrow buttons to highlight the photo you want to display Press OK The photo displays l Ve You can display your photos in fullscreen Select the A photo press OK then highlight Fullscreen and press OK Removing the USB drive from the TV Do not remove the USB thumb drive while the TV is on Doing so may damage the drive To safely remove your USB drive from the TV 1 Turn off the TV 2 Disconnect your USB thumb drive from the USB port on the side of the TV Connected Sources Displays connected USB devices To change source highlight it and press OK Current Folder Start Fullscreen Slideshow Sort by Name or Date View Thumbnails or Folders Adjust Slideshow Settings Back Button Highlight this button and press OK to return to the previous screen File Name D 1920x1080 Resolution 1920x1080 Size 1607
15. to easily set up channels on the TV To use guided setup 1 Press the MENU button on the remote The on screen menu is VIZIO displayed q GUIDED SETUP Channel Setup 2 Highlight Guided Setup and press OK The GUIDED SETUP menu is displayed 3 Highlight the Channel Setup and press OK 4 Follow the on screen instructions When finished press the EXIT button on the remote USING THE INFO WINDOW The Info Window can be displayed by pressing the GUIDE or INFO buttons on the remote e Press the GUIDE or INFO button once to display channel input and display information Press the GUIDE or INFO button twice to display the program title program rating audio information and the start and end times of the program Channel Input Information KCET HD Normal Oliver wakes up one morning only to discover that his pals are missing In this hour long holiday special Oliver goes on a journey in search of his pals Who knows what he ll en counter on the way Program Title Program Description DIGITAL EPISODE GUIDE WINDOW 49 Using the USB Media Player USING THE USB MEDIA PLAYER The USB media player allows you to connect a USB thumb drive to your TV and view photos USB PORT Preparing your USB drive to display USB Media To display USB media you must first save your photos onto a USB thumb drive e The USB thumb drive must be formatted as FAT32 e Files on the USB thumb drive must end in a
16. to select either Antenna or Cable Finding Channels Before the TV can detect and display channels and their associated information you must scan for channels A channel scan may also be necessary when the TV has been moved to an area where different free to air broadcast television channels are available To perform an Auto Channel Scan IE From the CHANNELS menu highlight Find Channels and press OK The channel scan begins Wait until the channel scan is 100 complete Highlight Done and press OK Press the EXIT button on the remote If the channel scan is cancelled only the channels that were already discovered are saved A new channel scan clears all saved channels VIZIO A lt FIND CHANNELS Channels Found Digital O Analog 0 13 Complete MN Cancel Cancel the channel scan Adding New Channels Occasionally you may need to add a new range of channels or add a new analog channel You can do this by using the Partial Channel Search and Add Analog Channel options To add a range of new channels 15 From the CHANNELS menu highlight Partial Channel Scan and press OK The PARTIAL CHANNEL SCAN menu is displayed Highlight Scan Mode and select the type of channel you are adding Analog Digital or Analog Digital Highlight From Channel and enter the channel where you want to begin the scan Use the Left Arrow button to backspace Use the Number Pad on the remote to enter the channel Highlight
17. 270KB Photo Information Displays name resolution and file size for currently selected photo Back Button Highlight and press OK to return to left column Current Folder Displays the folder path SE EE VIZIO_2GB Photo root Page 1 of 1 Page Information If your USB thumb drive has more files than can be displayed ona single screen the page information is displayed here 5 Folder Contents This area displays the contents of the currently selected folder You can browse files and folders using the Arrow and OK buttons on the remote PHOTO VIEWER Troubleshooting amp Technical Support A Do you have questions Find answers at support vizio com Find help with e New product setup e Connecting your devices e Technical problems e Product updates and more ON Live chat vizio support available product Support You can also contact our award winning support team at Phone 877 698 4946 toll free Email techsupport VIZIO com Hours of Operation Monday Friday 7 am To 11 Pm PST Saturday Sunday 9 am To 6 pm PST Se habla Espa ol Nous parlons Fran ais Troubleshooting amp Technical Support There is no power Ensure the TV is plugged into a working electrical outlet e Ensure the power cable is securely attached to the TV e Press the Power Standby button on the remote or on the side of the TV to turn the TV on The power is on but there is no image
18. CES CS CAO ee men 57 Legal amp Compliance sico oo 62 INSPECTING THE PACKAGE CONTENTS Before installing your new TV take a moment to inspect the package contents Use the images below to ensure nothing is missing or damaged VIZIO LED HDTV with Stand VIZIO VIZIO SS QUICK START GUIDE Model D28h C1 Remote Control with Batteries gt Y Power Cord Quick Start Guides 1 English 1 French Spanish TELLE 4xT410mm Phillips Screws PACKAGE CONTENTS After removing the TV from the box and inspecting the package contents you can begin installing the TV Your TV can be installed in two ways INSTALLING THE TV Ona flat surface using the included stand e Ona wall using a VESA standard wall mount not included Installing the TV Stand Your TV includes astand designed to support the weight of the TV and keep it from falling over However the TV can still fall over if e Itis placed on an uneven unstable or non level surface e Itis pushed pulled or otherwise improperly moved e Ifan earthquake occurs and the TV is not properly secured TV ON STAND INSTALLING THE STAND 1 Place the TV screen down on a clean flat surface To prevent 2 Align the stand and hook it into the bottom of the TV as shown scratches or damage to the screen place the TV on a soft surface such as a blanket 3 Using a Phillips screwdriver tighten four 4 T4 10mm screws into
19. Connecting Your Devices ass 12 Connecting A Device sereridessi cides a da o 12 Connecting a Device Audio and Video Cable Types 13 Connecting an Audio Device 15 Connecting an Audio Device Audio Cable Types 16 Connecting a COMPUTE vaca kaveeda ceda cadena Sc 17 Connecting an Audio Device ARC 18 Completing the First Time Setup 19 Using the On Screen Menu 20 Navigating the On Screen Menu 20 Changing the Input Source scgescacaeaeavn ec eanee ds 20 Changing the Screen Aspect Ratio 21 Adjusting the Picture Settings 22 Adjusting the More Picture Settings 23 Adjusting the Color Temperature 24 Adjusting the Picture Mode Edit Settings 24 Saving a Custom Picture Mode ss 25 Locking and Unlocking Custom Picture MOdes 25 Deleting a Custom Picture Mode rica 26 Resetting a Preset Picture Mode 26 Adjusting the Color Calibration Settings ommmmmommommoo 27 Adjusting the Color Tuner Settings 28 Adjusting the Audio Settings sus wee cee vee cava da 31 Changing the Equalizer Settings scssccssscsssassesessesvesdeaseosevsserss 32 Deleting the Custom Audio Mode 32 Setting TIMET A vee eek heared reals 33 Setting the Sleep TIMO rai n oa ind 33 Setting the Auto Power Off Feature 33 Setting Up Channels coria aros nana aces 34 Selecting a Channel Source sacieci
20. ER INCIDENTAL OR CONSEQUENTIAL DAMAGES SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM PROVINCE TO PROVINCE THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE CHECK www vizio ca FOR THE MOST CURRENT VERSION SERVICE AND PARTS INFORMATION ELECTRONIC SPARE PARTS VIZIO offers these supplier parts contact information for your convenience In the event service is needed on your VIZIO product after the warranty period and a replacement part is required please contact one of the following VIZIO authorized spare parts distributors with the required part number Vizparts com Inc 710 Epperson Drive Suite B City of Industry CA 91748 888 260 7765 www vizparts com Limited Warranty MEXICO ONE YEAR LIMITED WARRANTY ON PARTS AND LABOR Covers units purchased as new in Mexico only VIZIO Sales amp Marketing M xico S de R L de C V provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non commercial usage or ninety 90 days of commercial use If a Product covered by this warranty is determined to be defective within the warranty period VIZIO Sales amp Marketing M xico S de R L de C V will either repair
21. GE LANGUAGE menu is displayed English Espa ol Select your preferred language ace English Espa ol or Fran ais Press OK Press the EXIT button on the remote xy SETTING UP CLOSED CAPTIONING Your TV can display closed captions for programs that include them Closed captions display a transcription of a program s dialogue WU 2 Ifthe program you are viewing is not being broadcast with closed captions the TV will not display them Wy wil 4 I The Closed Captioning menu only appears when the input is an antenna for Over the Air signals cable TV directly from the wall no cable box or a device with a composite video connection To activate or deactivate closed captions 1 Press the MENU button on the A remote The on screen menu is VIZIO d isplayed CLOSED CAPTIONS Captions Off 2 Use the Arrow buttons on the Analog Cased Captions CG remote to highlight Closed i Captions and press OK The S Closed Captions CSI CLOSED CAPTIONS menu is BIE Custom displayed 3 Use the Arrow buttons on the remote to highlight the type of closed captions you wish to see e Captions turns this option On or Off e Analog Closed Captions for analog NTSC TV channels e Digital Closed Captions for digital ATSC TV channels 4 After highlighting the type of closed captions you wish to see use the Left Right Arrow M buttons on the remote to select the caption channel you wish to display then press EXIT
22. K The menu headed by the local date and time is displayed 4 Highlight Time Zone and press OK The TIME ZONE menu is displayed 5 Highlight your time zone and press OK 6 Highlight Daylight Saving Time and press OK The DAYLIGHT SAVING TIME menu is displayed Choose On if your locale observes daylight savings time or Off if it does not 7 Press the EXIT button on the remote Adjusting the Wide Mode Aspect Ratio e Wide stretches a 4 3 aspect ratio picture to the edges of The TV can display images in five different modes Normal Stretch the screen Since the picture is being stretched the display Panoramic Wide and Zoom Each mode displays the picture image may appear distorted If the program is already differently formatted for widescreen viewing 1 85 1 or 2 35 1 then black bars will appear on the top and bottom of the display To change the screen aspect ratio image 1 Press the MENU button on the e Zoom expands images with black bars to fit the screen i a a remote The on screen menu is Normal Normal displayed a Panoramic Stretch 2 Use the Arrow buttons on the remote to highlight System and E Wide press OK The SYSTEM menu is displayed Zoom rue 3 Use the Arrow buttons on the Note Aspect ratio settings may remote to highlight Wide and vary Oymput sours press OK The wide mode menu appears at the top of the screen 4 Use the Arrow buttons to highlight the aspect ratio you wish to use and the pre
23. LIED WARRANTY OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE VIZIO Sales amp Marketing M xico S de R L de C V S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO Sales amp Marketing M xico S de R L de C V S NEGLIGENCE ALLEGED DAMAGE OR DEFECTIVE GOODS WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT VIZIO Sales amp Marketing M xico S de R L de C V SHALL NOT BE RESPONSIBLE FOR LOSS OF USE LOSS OF INFORMATION OR DATA COMMERCIAL LOSS LOST REVENUE OR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES Some states do not allow limitations on how long an implied warranty lasts or the exclusion of incidental or consequential damages so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE CHECK www vizio com es mx FOR THE MOST CURRENT VERSION Personal Data If your VIZIO Sales amp Marketing M xico S de R L de C V product is capable of storing personal data and other information ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE COURSE OF SOME IN HOME AND ALL SHIP IN WARRANTY SERVICE If this occurs your product will be restored to you configured as originally
24. R CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE CHECK WWW VIZIO COM FOR THE MOST CURRENT VERSION Personal Data If your VIZIO product is capable of storing personal data and other information ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE COURSE OF SOME IN HOME AND ALL SHIP IN WARRANTY SERVICE If this occurs your product will be restored to you configured as originally purchased You will be responsible for restoring all applicable data and passwords Recovery and reinstallation of user data is not covered under this Limited Warranty In order to protect your personal information VIZIO recommends that you always clear all personal information from the unit before it is serviced regardless of the servicer Zero Bright Pixel Defect Guarantee This policy covers zero bright pixel defects for the duration of the limited ONE YEAR WARRANTY on select new product purchases To determine if this guarantee applies to your product refer to the DETAILS tab of the model s product information page www VIZIO com or look for the zero bright pixel guarantee on the box Limited Warranty CANADA ONE YEAR LIMITED WARRANTY ON PARTS AND LABOR Covers units purchased as new in Canada only VIZIO provides a warranty to th
25. VIZIO USER MANUAL Model D28h C1 dts Studio Sound DOLBY DIGITAL Hom HIGH DEFINITION MULTIMEDIA INTERFACE This product qualifies for ENERGY STAR in the factory default setting and this is the setting in which power savings will be achieved Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating For more information on the ENERGY STAR program go to energystar gov For DTS patents see http patents dts com Manufactured under license from DTS Licensing Limited DTS the Symbol amp DTS and the Symbol together are registered trademarks and DTS Studio Sound is a trademark of DTS Inc O DTS Inc All Rights Reserved Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC THANK YOU FOR CHOOSING VIZIO And congratulations on your new VIZIO HDTV To get the most out of your new VIZIO product read these instructions before using your product and retain them for future reference Be sure to inspect the package contents to ensure there are no missing or damaged parts PRODUCT REGISTRATION To purchase or inquire about accessories and installation services for your VIZIO product visit our web
26. been exposed to rain or moisture does not operate normally or has been dropped Unplug the power cord before cleaning your TV When moving your TV from an area of low temperature to an area of high temperature condensation may form in the housing Wait before turning on your TV to avoid causing fire electric shock or component damage A distance of at least three feet should be maintained between your TV and any heat source such as a radiator heater oven amplifier etc Do not install your TV close to smoke Operating your TV close to smoke or moisture may cause fire or electric shock Slots and openings in the back and bottom of the cabinet are provided for ventilation To ensure reliable operation of your TV and to protect it from overheating be sure these openings are not blocked or covered Do not place your TV in a bookcase or cabinet unless proper ventilation is provided Never push any object into the slots and openings on your TV cabinet Do not place any objects on the top of your TV Doing so could short circuit parts causing a fire or electric shock Never spill liquids on your TV Your TV should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home consult your dealer or local power company Do not apply pressure or throw objects at your TV This may compromise the integrity of the display The manufacturer s warranty does not cov
27. ble Audio Return Channel enabled connectors ARC TVs allow audio to be sent over an already connected HDMI cable eliminating the need for a separate audio cable See Connecting an Audio Device ARC on page 18 e Quality Stereo Connection e CEC 2 way Communication 2 0 Channel Auto setup Analog Connection e PCM DTS Dolby Digital e 2 0 5 1 Scaleable Lossless e Audio Signal Onl 6 y Digital Audio Connection e Audio and Video Signals O 3 5mm GOOD BEST 16 CONNECTING A COMPUTER Your TV can be used to display output from a personal computer To use your TV as a PC display 1 Connect a VGA cable not included to your PC and the RGB port on the back of the TV This cable transmits video 2 Connect a 3 5mm cable not included to your PC and the PC Audio In port on the back of the TV This cable transmits audio 3 Set your PC s resolution to match the resolution of your TV See Appendix B Specifications Personal Computer VIDEO VGA Cable AUDIO 3 5 mm Cable BACK OF TV Cables not included 17 CONNECTING AN AUDIO DEVICE ARC Without HDMI ARC Without an HDMI ARC setup your TV needs an extra cable to connect it to your home audio receiver The audio signal is analog only Built in Tuner Your TV 3 5 mm audio 4 HDMI Your Blu ray Player 18 With HDMI ARC Built in Tuner Your TV Your Blu ray Pla
28. computer output 22 To manually change each of the picture settings use the Up Down Arrow buttons on the remote to highlight that picture setting then use the Left Right Arrow buttons to adjust the setting e Backlight Adjusts the LED brightness to affect the overall brilliance of the picture Backlight cannot be adjusted from some picture modes e Brightness Adjusts the black level of the picture When this setting is too low the picture may be too dark to distinguish details When this setting is too high the picture may appear faded or washed out e Contrast Adjusts the white level of the picture When this setting is too low the picture may appear dark When this setting is too high the picture may appear faded or washed out If the setting is too high or too low detail may be difficult to distinguish in dark or bright areas of the picture e Color Adjusts the intensity of the picture colors e Tint Adjusts the hue of the picture This setting is useful in adjusting the flesh tones in the picture If flesh appears too orange reduce the level of color before adjusting tint e Sharpness Adjusts the edge sharpness of picture elements It can be used to sharpen non HD high definition content however it will not produce detail that does not otherwise exist When you have finished adjusting the picture settings press the EXIT button on the remote Adjusting the More Picture Settings e Picture Size
29. ct ratio picture to the left 21 ADJUSTING THE PICTURE SETTINGS Your TV display can be adjusted to suit your preferences and viewing conditions To adjust the picture settings l Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight Picture and press OK The PICTURE menu is displayed Use the Arrow buttons on the remote to highlight Picture Mode then use the Left Right Arrow buttons to change the picture mode e Standard mode sets the various picture settings to values that meet ENERGY STAR requirements e Calibrated mode sets the picture settings to values perfect for watching TV in a brightly lit room VIZIO A PICTURE Picture Mode Standard Backlight EJ 85 Brightness EJ 50 Contrast ER 52 Color E 60 Tint E 0 Sharpness E 9 More Picture Picture Mode Edit Color Calibration Select from preset picture modes Standard picture mode meets ENERGY STARS requirements For the best picture use Calibrated mode To reduce video delay lag when gaming use Game mode VW e Calibrated Dark mode sets the picture settings to values perfect for watching TV in a dark room e Vivid mode sets the picture settings to values that produce a brighter more vivid picture e Game mode reduces throughput delays and optimizes the picture settings for displaying game console output e Computer mode optimizes the picture settings for displaying
30. d easy access to the unit and does not include de installation or re installation of the product In Home Service is subject to availability VIZIO will provide other service type options when in home service is not available TV s under 32 must be sent to a VIZIO service center to obtain warranty service VIZIO is not responsible for transportation costs to the service center but VIZIO will cover return shipping to the customer Pre authorization is required before sending any unit in for warranty service Product returns to VIZIO s service center must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection VIZIO Technical Support will provide instructions for packing and shipping the covered Product to the VIZIO service center 58 Limitations and Exclusions VIZIO s one year limited warranty only covers defects in materials and workmanship This warranty does not cover for example cosmetic damage normal wear and tear improper operation improper voltage supply or power surges signal issues damages from shipping acts of God any type of customer misuse modifications or adjustments as well as installation and set up issues or any repairs attempted by anyone other than by a VIZIO authorized service center Products with unreadable or removed serial numbers or requiring routine maintenance are not covered This one year limited warranty does not cover Products sold AS IS
31. e Do not expose your TV to rain or moisture If water penetrates into your TV unplug the power cord and contact your dealer Continuous use in this case may result in fire or electric shock Do not use your TV if any abnormality occurs If any smoke or odor becomes apparent unplug the power cord and contact your dealer immediately Do not try to repair your TV yourself Avoid using dropped or damaged appliances If your TV is dropped and the housing is damaged the internal components may function abnormally Unplug the power cord immediately and contact your dealer for repair Continued use of your TV may cause fire or electric shock Do not install your TV in an area with heavy dust or high humidity Operating your TV in environments with heavy dust or high humidity may cause fire or electric shock Follow instructions for moving your TV Ensure that the power cord and any other cables are unplugged before moving your TV When unplugging your TV hold the AC DC power adapter not the cord Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock When your TV will not be used for an extended period of time unplug the power cord To reduce risk of electric shock do not touch the connector with wet hands Insert batteries in accordance with instructions Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator Do not expose batteri
32. e channel is accessible Changing the Parental Control Passcode If you use the parental controls you should change the passcode to prevent children from accessing inappropriate material Blocking and Unblocking Content by Rating A channel may sometimes broadcast programs that are meant for children and at other times broadcast programs that are meant for mature audiences You may not want to block the channel completely using a channel lock but you may wish to block certain programs from being viewed When this is the case you can use the TV s Rating Block feature to block content based on its rating Wi at For a list of content ratings and their definitions visit www tvguidelines org 25 To block or unblock content by its rating 1 From the PARENTAL CONTROLS menu highlight the content type you want to adjust and press OK USA TV USA television program broadcasts USA Movie USA movie broadcasts Canadian English Canadian English television program broadcasts Canadian French Canadian French television program broadcasts 2 For each rating type you want to block or unblock use the Up Down and Left Right Arrow buttons on the remote to highlight the rating type and press OK 3 When the rating type is blocked the Lock icon appears locked Content with this rating and all higher ratings cannot be viewed 4 When the rating type is unblocked the Lock icon appears unlocked Content wit
33. e original purchaser of a new Product against defects in materials and workmanship for a period of one year of non commercial usage and ninety 90 days of commercial use If a Product covered by this warranty is determined to be defective within the warranty period authorized for sale in Canada and from an authorized Canadian reseller VIZIO will repair replace or refund the unit at its sole option and discretion VIZIO reserves the right to dispatch In Home Service subject to availability or provide other service type options To obtain warranty service contact VIZIO Technical Support via email techsupport VIZIO com or via phone at 877 MY VIZIO 877 698 4946 from 7 00AM to 11 00PM Monday through Friday and 9 00AM to 6 00PM Saturday and Sunday CST or www vizio ca Pre authorization must be obtained before sending any product to a VIZIO service center Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period Parts and Labor There will be no charge for parts or labor during the warranty period Replacement parts and units may be new or recertified at VIZIO s option and sole discretion Replacement parts and units are warranted for the remaining portion of the original warranty or for ninety 90 days from warranty service or replacement whichever is greater Type of Service TV s 32 or larger will usually be serviced in home In home service requires complete an
34. ea Dimensions w Stand w o Stand Weight w Stand w o Stand TV Type Refresh Rate Maximum Resolution Pixel Pitch Viewing Angle HDMI Inputs Component Video Inputs Composite Inputs RF Antenna Input USB 2 0 Ports Audio Outputs OSD Language Remote Control Model Certifications Compliance Voltage Range D28h C1 28 Class 27 51 24 85 x 16 47 x 4 88 24 85 x 15 70 x 2 36 8 64 lbs 8 31 lbs D LED 60 Hz 1366 x 768 720p 0 44475 mm H x 0 44925 mm V 178 7 178 2 1 1 Shared with Component 1 1 HDMI Stereo 3 5mm headset jack English Spanish French XRTO20 UL cUL FCC Class B BET7 ICES 003 Class B IC HDMI CEC ARC Dolby Digital Energy Star 6 1 NRCan CONUEE 120V 60 Hz 55 D28h C1 Standby Power lt 0 5W Zero Bright Pixel Guarantee Ves eee e eee eee eee Limited Warranty UNITED STATES Limited Warranty on Parts and Labor Covers units purchased as new in United States and Puerto Rico only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one 1 year of non commercial usage and ninety 90 days of commercial use If a Product covered by this warranty is determined to be defective within the warranty period VIZIO will either repair or replace the Product at its sole option and discretion To obtain warranty service contact VIZIO Technical Support via e mai
35. ear water e Clean only with dry cloth e Do not block any ventilation openings Install in accordance with the manufacturer s instructions e Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet e Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus e Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has
36. ecting the Calibrated mode e Check all cables to ensure they are securely attached The picture is distorted e Nearby electrical devices may be interfering with the TV Separate the TV from electrical appliances cars or fluorescent lights e Ensure all cables are securely attached see noise or static on the screen e When your TV s digital capabilities exceed a digital broadcast signal the signal is up converted improved to match your TV s display capabilities This up converting can sometimes cause irregularities in the image e Ifyou are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal 53 Troubleshooting amp Technical Support The TV has pixels dots that are always dark Your HDTV is precision manufactured using an extremely high level of technology However sometimes pixels may not display correctly These types of occurrences are inherent to this type of product and do not constitute a defective product The display image does not cover the entire screen Some programs have black bars on the top or sides of the picture so that the picture keeps its original shape Examples include wide screen movies and older television programs Press the WIDE button on the remote to change the width of the image See Changing the Screen Aspect Ratio on page 21
37. el and press OK The SKIP CHANNEL VIZIO a menu is displayed lt SKIP CHANNEL 1 Test 0 O 2 For each channel you wish 1 Test 1 to remove use the Up Down 12 Test2 Arrow buttons on the remote to 2 Tse O highlight the channel and press seal e OK A Y appears to the right of 20 TE E each channel you select 3 When you have selected all of the channels you wish to remove press the EXIT button on the remote 36 Changing the Audio Language Some free to air cable and satellite channels broadcast programs in more than one language The Analog Audio and Digital Language features allow you to listen to audio from Secondary Audio Programming SAP SAP allows you to listen to broadcasts in multiple languages e Analog Audio works with analog channels Digital Language works with digital channels Not all programs are broadcast in multiple languages A The Analog Audio and Digital Language features only work when the program being viewed is being broadcast in the language you select To use the Analog Audio feature 1 Fromthe CHANNELS menu highlight Analog Audio and HENS 2 press OK The ANALOG AUDIO SHENA ee menu is displayed stereo SAP 2 Select Stereo SAP Secondary Mono Audio Programming or Mono Press OK 3 Press the EXIT button on the remote VW To use the Digital Language feature IE Em From the CHANNELS menu highlight Digital Language VIZIO A and press OK The DIGITAL lt DIGITAL LANGUA
38. er user abuse or improper installations The power cord must be replaced when using different voltage than the voltage specified For more information contact your dealer When connected to a power outlet power is always flowing into your TV To totally disconnect power unplug the power cord The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un isolated dangerous voltage within the inside of your TV that may be of sufficient magnitude to constitute a risk of electric shock to persons Do not overload power strips and extension cords Overloading can result in fire or electric shock The wall socket should be installed near your TV and easily accessible Only power of the marked voltage can be used for your TV Any other voltage than the specified voltage may cause fire or electric shock Do not touch the power cord during lightning To avoid electric shock avoid handling the power cord during electrical storms Unplug your TV during a lightning storm or when it will not be used for long period of time This will protect your TV from damage due to power surges Do not attempt to repair or service your TV yourself Opening or removing the back cover may expose you to high voltages electric shock and other hazards If repair is required contact your dealer and refer all servicing to qualified service personnel WARNING Keep your TV away from moistur
39. erature mode If the current picture mode is a pre set the color temperature is reset for all pre set picture modes using the current color temperature mode It does not affect saved custom picture modes If the current picture mode is a saved custom picture mode the color temperature only reset for that custom picture modes It does not affect pre set picture modes or other custom picture modes For example suppose that You have created two custom picture modes My Picture Settings and Oliver They both use the Normal color temperature but you have adjusted it for each of the modes and You have changed the Color Tuner settings for the Normal color temperature while in the Calibrated picture mode So you have My Picture Settings with a modified Normal color temperature Oliver with different changes to the Normal color temperature and a third set of changes to the Normal color temperature that applies to all of the pre set picture modes The Calibrated and Calibrated Dark picture modes both use the Normal color temperature If Calibrated is the current picture mode when the Normal color temperature is reset the change affects both of these picture modes but does not undo the changes to the color temperature for the My Picture Settings or Oliver custom picture modes If My Picture Settings is the current picture mode when the Normal color temperature is reset the change onl
40. ersonal information VIZIO recommends that you always clear all personal information from the unit before it is serviced regardless of the servicer ZERO BRIGHT PIXEL DEFECT GUARANTEE This policy covers zero bright pixel defects for the duration of the limited ONE YEAR WARRANTY on select new product purchases To determine if this guarantee applies to your product refer to the DETAILS tab of the model s product information page www vizio ca or look for the zero bright Limited Warranty pixel guarantee on the box RECERTIFIED WARRANTY NINETY DAY LIMITED WARRANTY ON PARTS AND LABOR Covers units purchased and currently located in Canada only IF THIS WARRANTY DOCUMENT IS RECEIVED ALONG WITH A UNIT WHICH IS PROVIDED TO THE CUSTOMER AS A WARRANTY REPLACEMENT THE WARRANTY OF THE PURCHASED UNIT MAY SUPERSEDE THIS ONE SUCH A REPLACEMENT UNIT IS WARRANTED FOR THE LATER OF EITHER THE REMAINING PORTION OF THE ORIGINAL WARRANTY AS SPECIFIED BY THE ORIGINAL WARRANTY DOCUMENTATION AND DERIVED FROM THE ORIGINAL PURCHASE DATE OR THE WARRANTY PERIOD SPECIFIED HEREIN AS DERIVED FROM THE DATE THE REPLACEMENT UNIT IS RECEIVED VIZIO provides a warranty to the original purchaser of its products against defects in materials and workmanship for a period of ninety 90 days of non commercial use If a Product covered by this warranty is determined to be defective within the warranty period authorized for sale in Canada and fro
41. es to excessive heat such as sunshine fire or the like If any of the following occurs contact the dealer The power cord fails or frays Liquid sprays or any object drops into your TV Your TV is exposed to rain or other moisture Your TV is dropped or damaged in any way The performance of your TV changes substantially This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus The mains plug or appliance coupler is used as the disconnect device the disconnect device shall remain readily operable CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the product s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna satellite dish or cable system is to be connected to the TV make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges Article 810 of the National Electrical Code ANSI NFPSA 70 provide
42. for an explanation of each option Adjust the video settings of the device that is the source of the video Blu ray player DVD player cable or satellite box etc When I change input source the display image changes size The TV remembers the viewing mode on each input source If the viewing mode on the new input source differs from the one on the input source you switch from the difference may be noticeable See Adjusting the Picture Settings on page 22 54 There is no sound Press Volume Up on the remote control Press the MUTE button on the remote to ensure mute is off Check the audio settings See Adjusting the Audio Settings on page 31 Ensure that the speakers are set to On Ensure no headphones are connected to the TV Check the audio connections of external devices Blu ray player game console cable satellite box that are connected to the TV If you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal When I change input source the volume changes The TV remembers the volume level on each input source If the volume level on the new input source is higher or lower than the level on the source you switch from the difference may be noticeable Use the Volume Up Down buttons on the remote to adjust the volume Specifications B Screen Size Viewable Ar
43. h this rating and all lower ratings can be viewed If you want to block all unrated content highlight Block Unrated Shows and use the Arrow buttons on the remote to select On 5 When you are finished adjusting the rating level blocks press the EXIT button on the remote 45 To change the parental control passcode ile Sk From the PARENTAL CONTROLS menu highlight Change PIN and press OK The CHANGE PIN menu is displayed In the New PIN field use the Number Pad on the remote to enter your new 4 digit parental control passcode In the Confirm PIN field use the Number Pad on the remote to re enter your new 4 digit parental control passcode Write down your new parental control passcode and save it in a secure location Press the EXIT button on the remote Resetting the Content Locks To reset the content locks to the factory default settings 1 From the PARENTAL CONTROLS menu highlight RESET LOCKS and press OK The TV displays Are you sure you want to RESET ALL LOCKS SETTINGS to the factory defaults Highlight Yes and press OK Controlling Other Devices with CEC The CEC function on your TV enables you to control devices connected to the HDMI ARC input with the included remote without any programming Using CEC your VIZIO TV remote can control Power on off e Volume e Mute Not all HDMI devices support CEC See your device s user manual for details To enable disable or adjust CEC sett
44. ight to be on To turn the Power Indicator Light on or off 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight System and press OK The SYSTEM menu is displayed 3 Highlight Power Indicator and press OK 4 Use the Up Down Arrow buttons to select On or Off then press OK 47 Restoring the TV to Factory Default Settings You can use the TV s Reset amp Admin menu to restore the TV to its factory default settings All of the on screen menu settings can be reset to the factory defaults A If you restore the TV to the factory default settings all changes you have made to the settings will be lost To restore the TV to its factory default settings ik 2 Press the MENU button The on screen menu is displayed Use the Arrow buttons on the remote to highlight System and press OK The SYSTEM menu is displayed Highlight Reset amp Admin and press OK The RESET amp ADMIN menu is displayed Highlight Reset TV to Factory Defaults and press OK Enter your parental control passcode If you have not yet set up a parental passcode enter the default 0000 The TV displays Select Reset to restore all TV settings to factory defaults Highlight Reset and press OK Wait for the TV to turn off The TV will turn back on shortly afterward and the Setup App will begin 48 USING THE GUIDED SETUP MENU The TV s Setup App can be used
45. ings 1 Set up your audio device and connect it to the HDMI 1 HDMI ARC input on the TV 2 On your audio device select the HDMI ARC input 3 Press the MENU button on the remote The on screen menu is displayed 4 Use the Arrow buttons on the remote to highlight System and press OK The SYSTEM menu is displayed 5 Use the Arrow buttons on the remote to highlight CEC and press OK The CEC Settings menu is displayed 6 Highlight CEC and press OK Select a setting and then press OK CEC To use CEC you must select On e System Audio Control To control your device s audio using the TV s remote control select On Device Discovery To determine if your device is connected and supports CEC select Device Discovery and then press OK 7 Press the EXIT button on the remote To begin device discovery e From the CEC menu highlight Device Discovery and press OK Your TV begins looking for CEC devices connected to all of its HDMI inputs When discovery is complete The CEC compatible devices are listed below Device Discovery The names of these devices now appear on the Input menu e Ifan audio device was discovered the TV s speakers are turned off The VIZIO TV remote controls an attached VIZIO sound bar or other audio system Turning the Power Indicator On or Off The Power Indicator on the front of your TV normally does not glow when the TV is on You can change this setting if you prefer the l
46. ion related to the procedure to file a warranty claim and to obtain information related to parts components supplies and accessories or contact VIZIO Sales amp Marketing M xico S de R L de C V s authorized representative as follows Warranty Support LATAM S A de C V Calle Coahuila 326 Colonia Bellavista Le n Gto C P 37360 Telephone number within Mexcio toll free 01 800 801 0096 Telephone number from outside of Mexcio toll free 001 855 472 7444 To make a warranty claim submit this Product and this policy duly stamped by the establishment from which it was purchased For customers in Mexico with VIZIO Sales amp Marketing M xico S de R L de C V televisions that are larger than 32 inches VIZIO Sales amp Marketing M xico S de R L de C V or its authorized representative will provide onsite warranty coverage of repair and or replacement services Under the terms of this warranty VIZIO Sales amp Marketing M xico S de R L de C V or its representative must exchange parts and components of the Product and include labor and shipping expenses of the Product on which this warranty is valid within the service network at no cost to the consumer 61 Vizio Sales amp Marketing M xico S de RL de CV Blvd Manuel Avila Camacho 36 Piso 12 Lomas de Chapultepec Secci n Delegaci n Miguel Hidalgo M xico D F C P 11000 RFC VSA110513BK9 Legal amp Compliance FCC Class B Radio Interfe
47. l TechSupport VIZlO com or via phone at 877 MY VIZIO 877 698 4946 from 7 00AM to 11 00PM Monday through Friday and 9 00AM to 6 00PM Saturday and Sunday Central Time or visit www VIZIO com PRE AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period Parts and Labor There will be no charge for parts or labor during the warranty period Replacement parts and Products may be new or recertified at VIZIO s option and sole discretion Replacement parts and Products are warranted for the remaining portion of the original warranty or for ninety 90 days from warranty service or replacement whichever is greater Type of Service Defective Products must be sent to a VIZIO service center to obtain warranty service VIZIO is not responsible for transportation costs to the service center but VIZIO will cover return shipping to the customer PRE AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE Product returns to VIZIO s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection VIZIO Technical Support will provide instructions for packing and shipping the covered Product to the VIZIO service center Limitations and Exclusions VIZIO s one year limited warranty
48. m an authorized Canadian reseller VIZIO will repair replace or refund the unit at its sole option and discretion VIZIO reserves the right to dispatch In Home Service subject to availability or provide other service type options To obtain warranty service contact VIZIO Technical Support via email techsupportOVIZIO com or via phone at 877 MY VIZIO 877 698 4946 from 7 00AM to 11 00PM Monday through Friday and 9 00AM to 6 00PM Saturday and Sunday CST or visit www vizio ca Proof of purchase in the form of a purchase receipt or copy thereof is required Parts and Labor There will be no charge for parts or labor during the warranty period Replacement parts and units may be new or recertified at VIZIO s option and sole discretion Replacement parts and units are warranted for the remaining portion of the original warranty or for ninety 90 days from warranty service or replacement whichever is later Types of Service Units 32 or larger will usually be serviced in home In home service requires complete and easy access to the unit and does not include de installation or re installation of the product However in some cases it may be necessary to send the unit to a VIZIO service center VIZIO will cover the transportation charges to and from the same customer location Units less than 32 must be sent to a VIZIO service center VIZIO is not responsible for transportation costs to the service center but VIZIO will cover return shippi
49. menu is displayed HDMI 1 2 Use the Up Down Arrow buttons or the INPUT button on e the remote to highlight the input HDMI 2 you wish to view and press OK 000 The selected input is displayed COMP a Input Name RGB Note Inputs may vary by TV You can change the input names that appear on the Input menu to make your devices easy to recognize See Renaming Inputs Using the Devices Menu on page 40 for more information CHANGING THE SCREEN ASPECT RATIO and right edges of the screen The center of the image is not stretched but the sides of the image are extremely The TV can display images in five different modes Normal Stretch stretched If you are watching widescreen 1 85 1 or 2 35 1 Panoramic Wide and Zoom Each mode displays the picture content with black bars on the top and bottom the black differently bars will still appear on the top and bottom of the display image Some programs have black bars on the top or sides of the picture so that the picture keeps its original shape Examples include wide screen movies and older television programs Standard Definition 480i and 480p Fills the screen from the left to right edges 720p and 720i Not available e 1080p and 1080i Not available 1 Press the L button on the remote e Wide stretches a 4 3 aspect ratio picture to the edges of the screen Since the picture is being stretched the display To change the screen aspect ratio 2 Use the Arrow b
50. mer Pre authorization is required before sending any unit in for warranty service Product returns to VIZIO Sales amp Marketing M xico S de R L de C V s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection VIZIO Sales amp Marketing M xico S de R L de C V Technical Support will provide instructions for packing and shipping the covered Product to the VIZIO Sales amp Marketing M xico S de R L de C V service center 60 Limitations and Exclusions VIZIO Sales amp Marketing M xico S de R L de C V s one year limited warranty only covers defects in materials and workmanship This warranty does not cover for example cosmetic damage normal wear and tear improper operation improper voltage supply or power surges signal issues damages from shipping acts of God any type of customer misuse modifications or adjustments as well as installation and set up issues or any repairs attempted by anyone other than by a VIZIO Sales amp Marketing M xico S de R L de C V authorized service center Products with unreadable or removed serial numbers or requiring routine maintenance are not covered This one year limited warranty does not cover Products sold AS IS FACTORY RECERTIFIED or by a non authorized reseller THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE ANY IMPLIED WARRANTIES INCLUDING ANY IMP
51. n the back of the TV Save these screws with the stand Note If you remove the TV from the wall mount and set it up on the stand you must reinstall these screws 6 Attach your TV and wall mount to the wall carefully following the instructions that came with your mount WALL MOUNT SCREW LOCATIONS Use only with a UL listed wall mount bracket rated for the weight load of this TV HDMI BEST HEADSET RGB PC Q RGB PC PC AUDIO CABLE ANTENNA oO YN Pb Cb Pr Cr L R L composite G00D 1 COMPONENT BETTER aro O O Stereo Audio Out Connect 3 5mm audio device such as a sound bar or headset RGB Connect VGA cable from PC PC Audio In Connect 3 5mm audio cable from PC Coaxial Connect coaxial cable from cable satellite or antenna USB Connect USB thumb drive to play photos Component Composite Connect component or composite device HDMI Connect HDMI device REAR PANEL POWER Press to turn the TV on Press and hold to turn the TV off INPUT Press to change the input source SIDE PANEL REMOTE SENSOR amp POWER INDICATOR When using the remote point it directly at this sensor The power indicator flashes on when the TV turns on then goes out after several seconds To keep the power indicator on as long as the TV is on see Turning the Power Indicator On or Off on page 47 FRONT PANEL INPUT Change the currently displayed input EXIT Close the on screen menu
52. nalog connection e Audio and video signals 0000 Y V Pb Cb Pr Cr L R BETTER 14 HDMI CABLE HDMI is the intelligent all digital interface that delivers both dazzling quality and unmatched ease of use HDMI technologytransmits crystal clear digitalvideo along with multi channel surround audio HDMI connected devices have the ability to automatically adjust themselves for optimal viewing e HD video resolutions up to 1080p HD audio Digital connection e Audio and video signals BEST CONNECTING AN AUDIO DEVICE o 0 Your TV can output sound to an audio device such as a receiver or sound bar 1 Verify that your device has an audio port that matches an Home Audio Receiver available port on the TV HDMI Optical or RCA Turn the TV and your audio device off Connect the appropriate cable to the TV and the device ME pa Turn the TV and your device on VIZIO Sound Bar MIS ABRE ARC 2 WAY COMMUNICATION B EST 2 0 5 1 DIGITAL AUDIO PCM DTS DOLBY DIGITAL 3 5 mm CABLE G O O D ANALOG STEREO CONNECTION 2 0 CHANNEL BACK OF TV Cables not included 15 CONNECTING AN AUDIO DEVICE AUDIO CABLE TYPES 3 5mm CABLE HDMI CABLE 3 5mm cables or headphone cables are the HDMI technology transmits crystal clear digital traditional way of connecting your devices to your multi channel surround audio through a single audio device Audio signals are sent over 3 5mm HDMI ca
53. ng to the customer Pre authorization is required before sending 29 any unit in for service Any returns to VIZIO s service centers must utilize either the original carton box and shipping material or a replacement box and material provided by VIZIO VIZIO technical support will provide instructions for packing and shipping the unit to the VIZIO service center Limitations and Exclusions VIZIO s ninety day limited warranty only covers defects in materials and workmanship ltems not covered include but are not limited to cosmetic damage normal wear and tear misuse signal issues power surges and damages from shipping acts of God any sort of customer misuse installation customer modifications adjustments and set up issues Units with unreadable or removed serial numbers image burn in and routine maintenance are not covered This warranty does not cover products sold AS IS CLEARANCE or by a non authorized reseller THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE VIZIO S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE DISPLAY VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE COMMERCIAL LOSS LOST REVENUE OR LOST PROFITS OR OTH
54. ompliance could void the user s authority to operate the equipment 2 Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits 3 The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment It is the responsibilities of the user to correct such interference FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user s authority to operate this equipment Other Image s used under license from Shutterstock com 62 2015 VIZIO INC ALL RIGHTS RESERVED 150223EM US NC
55. on the screen e Ensure all cables are securely attached to the TV e Ensure all devices are connected correctly Devices differ see your device s user manual for details e Adjust Brightness Contrast or Backlight See Adjusting the Picture Settings on page 22 e Press the INPUT button on the remote to select a different input source The TV displays No Signal e Press the INPUT button on the remote control to select a different input source e Ifyou are using cable TV satellite or an antenna connected directly to the TV scan for channels See Finding Channels on page 34 The buttons on the remote aren t working e Ensure you are only pressing one button at a time e Point the remote directly at the TV when pressing a button e Replace the remote batteries with new ones See Replacing the Batteries on page 11 The image quality is not good e For the best image quality view high definition programs using digital sources Connect your devices with HDMI cables e Ifyou are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal The colors on the TV don t look right e Adjust the Color and Tint settings in the Picture menu See Adjusting the Picture Settings on page 22 e Select a pre set picture mode See Adjusting the Picture Settings on page 22 VIZIO recommends sel
56. or replace the unit at its sole option and discretion To obtain warranty service contact VIZIO Sales amp Marketing M xico S de R L de C V Technical Support via email serviciovizio integralsupport com mx or via phone within Mexico toll free at 01 800 801 0096 or from outside of Mexico toll free at 001 855 472 7444 from 9 00AM to 6 00PM Monday through Friday CST or visit www vizio com es mx Pre authorization must be obtained before sending any product to a VIZIO Sales amp Marketing M xico S de R L de C V service Center Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period Parts and Labor There will be no charge for parts or labor during the warranty period Replacement parts and units may be new or recertified at VIZIO Sales amp Marketing M xico S de R L de C V s option and sole discretion Replacement parts and units are warranted for the remaining portion of the original warranty or for ninety 90 days from warranty service or replacement whichever is greater Type of Service Defective Products must be sent to a VIZIO Sales amp Marketing M xico S de R L de C V service center to obtain warranty service VIZIO Sales amp Marketing M xico S de R L de C V is not responsible for transportation costs to the service center but VIZIO Sales amp Marketing M xico S de R L de C V will cover return shipping to the custo
57. ow buttons on the remote to highlight your preferred language and then press the OK button SELECT A LANGUAGE 6 When you are finished Your VIZIO TV is set up will be lo displayed The first time setup is complete 1 Using the On Screen Menu 5 Your TV features an easy to use on screen menu To open the on screen menu press the MENU button on the remote From this menu you can f f VIZIO A e Adjust the Picture settings ENES e Adjust the Audio settings Picture 4 Audio e Activate the Sleep Timer Ome Find and Set Up Channels cb Channels Set up Closed Captioning ee de Devices e Name the TV Inputs System Q Guided Setup e Adjust the TV Settings e Access the Guided Setup NW NAVIGATING THE ON SCREEN MENU To open the on screen menu press the MENU button on the remote Use the Arrow buttons to highlight a menu option and press the OK button to select that option A While navigating the on screen menu you can press the BACK button at any time to return to the previous menu screen The EXIT button will close the on screen menu QI 1 I 20 CHANGING THE INPUT SOURCE External devices such as DVD players Blu ray Players and video game consoles can be connected to your TV To use one of these devices with your TV you must first change the input source in the on screen menu To change the input device p 1 Press the INPUT button on TV the remote The input
58. rence Statement NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Notice 1 The changes or modifications not expressly approved by the party responsible for c
59. rent frequencies using either preset or custom settings See Locking and Unlocking Channels on page 44 e Delete Audio Mode Restores audio equalizer settings to the factory defaults by deleting the custom mode previously created See Deleting the Custom Audio Mode on page 32 4 When you have finished adjusting the audio settings press the EXIT button on the remote Changing the Equalizer Settings To select a pre set audio mode le 5 Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons to highlight Audio and press OK The AUDIO menu is displayed Use the Arrow buttons to highlight Equalizer and press OK The AUDIO MODE and equalizer settings screen appears Use the Left and Right Arrow buttons to select an audio mode The equalizer bars change to reflect the mode Press the EXIT button on the remote To customize an equalizer setting Ma Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons to highlight Audio and press OK The AUDIO menu is displayed Use the Arrow buttons to highlight Equalizer and press OK The AUDIO MODE and equalizer settings screen appears Use the Down Left and Right Arrow buttons to select any audio mode as a starting point and press OK Use the Up and Down Arrow buttons to adjust the boost up and attenuation down for the frequency Use the Left and Right Arrow buttons to select another frequenc
60. round sound experience from the TV s internal speakers TruSurround completes the entertainment experience by providing deep rich bass and by delivering crisp details and clear intelligible dialog Select On or Off e Volume Leveling Volume leveling uses DTS TruVolume to maintain consistent volume levels during transitions between program content AV formats and input sources Select On or Off In a few cases volume leveling may artificially suppress volume increases making it difficult to hear dialog or flattening sudden noises If this occurs turn 31 volume leveling off e Balance Adjusts the loudness of the audio output from the left and right speakers e Lip Sync Adjusts the synchronization between the display image and the accompanying audio track e Digital Audio Out Changes the type of processing for digital audio out and HDMI ARC output when connected to a home theater audio system or sound bar Select PCM or Bitstream e Analog Audio Out Sets the volume control properties for the RCA red amp white connector when connected to a home theater audio system Select Variable to control the external speakers volume from the TV s volume controls or select Fixed to control the external speakers volume from your home theater system controls s You must select Bitstream for audio with more than two JS channels 3 0 5 0 or 5 1 for example e Equalizer Adjusts the boost or attenuation of diffe
61. s information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of the grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements of the grounding electrode Ground Clamp Lightning Protection For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time unplug the TV from the wall outlet and disconnect the antenna or cable system Power Lines Do not locate the antenna near overhead light or power circuits or where it could fall into such power lines or circuits Remember the screen of the coaxial cable is intended to be connected to earth in the building installation Antenna Lead In Wire Antenna Discharge Unit NEC Section 810 20 Grounding Conductors NEC Section 810 21 Ground Clamps ie Power Service Grounding Electrode System Electric Service Equipment NEC ART 250 part H Table of Contents INSTAlIMS the TV assi ok 3 Inspecting the Package Contents 3 Installing the TY coros aedw eed Maude Gea pienti eames 3 Installing the TV SN ti 3 Installing the TV on a Wall unas 6 Controls and COMMEcCION S ss 7 Rea Panels canesweaheacdnede eee cae o Ra dee 7 Side Palen nitive oa e a sea 8 Front Panl ecurssrrtanriaia da ds 9 Remote Controles eses ea nesia ae E daa 10 Replacing the Batterles ios 11
62. site at www VIZIO com or call toll free at 877 698 4946 We recommend that you either e Register your VIZIO product at www VIZIO com e Complete and mail the enclosed registration card Extended Warranties For peace of mind and to protect your investment beyond the standard warranty VIZIO offers on site extended warranty service plans These plans provide additional coverage during the standard warranty period and must be purchased within the first year after purchase To purchase an extended warranty service plan visit http www squaretrade com vizio landing1 WHEN READING THIS MANUAL This symbol alerts you to important warnings or notices as part of the operating instructions Wi Os This symbol identifies helpful tips Wy N gt IMPORTANT SAFETY INSTRUCTIONS Your TV is designed and manufactured to operate within defined design limits Misuse may result in electric shock or fire To prevent your TV from being damaged the following instructions should be observed for the installation use and maintenance of your TV Read the following safety instructions before operating your TV Keep these instructions in a safe place for future reference e To reduce the risk of electric shock or component damage switch off the power before connecting other components to your TV e Read these instructions e Keep these instructions e Heed all warnings e Follow all instructions Do not use this apparatus n
63. ss OK e Normal preserves the content s original aspect ratio Since the 4 3 aspect ratio is not large enough to fill the TV s screen black bars are added to the left and right of the display image e Stretch expands the display image to fill the screen Images may appear wider than intended If you are watching widescreen 1 85 1 or 2 35 1 content black bars will still appear on the top and bottom of the display image This option is only available when the TV is displaying a 720p 1080i source e Panoramic expands the display image to fill the width of the screen Images may appear wider than intended If you are watching widescreen 1 85 1 or 2 35 1 content black bars will still appear on the top and bottom of the display image This option is only available when the TV is displaying a 480i 480p source 43 Using the Parental Controls The TV s parental controls allow you to prevent the TV from displaying certain channels or programs without a password The Parental Controls menu only appears when e You are using an the tuner receive your TV signals such as when you are using an antenna for Over the Air signals or when connected to cable TV directly from the wall no cable box e You have a device connected using a composite video cable or a coaxial cable such as a VCR satellite or cable box or DVR Wy Other devices have their own parental control settings FF Accessing the Parental Controls Menu To access
64. ssssestinctecdenasiensandencdsssdandegeres 34 Finding Chama Susini a 34 Adding New Channels 35 Skipping Chanine lS ecreis a a 36 Changing the Audio Language scarico 37 Setting Up Closed C ptioning 4 4544 dedans 38 Changing the Appearance of Digital Closed Captions 38 Renaming Inputs Using the Devices Menu 40 Changing the TV Se tiNeS ss ss sadaasisesssssdresades di 41 Viewing System Information scsccinineaiaiceicrc teens 41 Changing the On Screen Menu Language 42 Setting the Time and Local Settings 42 Adjusting the Wide Mode Aspect Ratio 43 Using the Parental Controls cnica 44 Accessing the Parental Controls Menu ccccnnccccccnnnnnnnns 44 Enabling or Disabling Program Rates caos 44 Locking and Unlocking Channels 44 Blocking and Unblocking Content by Rating 45 Changing the Parental Control Passcode 45 Resetting th Content LOCKS veia 45 Controlling Other Devices With CEC 46 Turning the Power Indicator On or Off 47 Restoring the TV to Factory Default Settings o 48 Using the Guided Setup Menu 48 Using the Info WINdOW s22 03saceseese nee nisi namiu 49 Using the USB Media Player 50 Preparing your USB drive to display USB Media 50 Displaying USB Media sans meet 50 Removing the USB drive from the TV 50 Troubleshooting amp Technical Support 52 Specifications PRPPO0 0 0 PPP 55 PI
65. st Pattern 1 Ensure that you are on an input that is displaying active content From the Color Tuner menu use the Arrow buttons to highlight Color Tuner and then press the Left Right Arrow buttons until the Color Bar Test Pattern menu is displayed lt Color Bar Test Pattern Off 2 Use the Arrow buttons on the remote to highlight Off Use the Left Right Arrow buttons to highlight On to show the Color Bar To hide the Color Bar Test Pattern use the Left Right Arrow buttons to highlight Off 3 When you are finished press the BACK button to adjust additional settings or EXIT To show or hide the Ramp Test Pattern To show or hide the Flat Test Pattern 1 Ensure that you are on an input that is displaying active content From the Color Tuner menu use the Arrow buttons to highlight Color Tuner and then press the Left Right Arrow buttons until the Flat Test Pattern menu is displayed lt Flat Test Pattern gt Off 2 Use the Arrow buttons on the remote to highlight Off Use the Left Right Arrow buttons to select the percentage brightness for the flat test pattern Selecting a percentage immediately shows the flat pattern at that brightness To disable the Flat Test Pattern use the Left Right Arrow buttons to highlight Off 3 When you are finished press the BACK button to adjust additional settings or EXIT 30 A Ensure that you are on an input that is displaying active content From the Color
66. t ratio of the picture by adjusting the backlight Select On or Off e Reduce Signal Noise Reduces background picture noise when viewing analog sources The function helps to correct speckle noise with a slight reduction in sharpness Select Off Low Medium or High e Reduce Block Noise Reduces pixelation and distortion for mpeg files Select Off Low Medium or High e Game Low Latency Reduces video delay lag when gaming Select On or Off This option is not available for devices connected using a coaxial cable 3 When you have finished adjusting the More Picture Settings press the EXIT button on the remote 28 Adjusting the Color Temperature Adjusting the color temperature changes the white balance of the picture To adjust the color temperature 1 From the MORE PICTURE menu use the Arrow buttons to highlight Color Temperature then press OK Use the Arrow buttons on the remote to highlight Color Temperature then press OK Use the Left Right Arrow buttons to highlight a color temperature preset and then press OK e Cool produces a blue hued picture Normal is optimized for television viewing Computer optimizes the picture for use as a PC monitor When you have finished adjusting the color temperature press the EXIT button on the remote COLORTEMPERATURE Cool Normal Computer Adjusting the Picture Mode Edit Settings Picture Mode Edit allows you to create picture
67. tellite Box DVD Blu ray Player HDMI CABLE BEST COMPONENT CABLE BETTER COAXIAL CABLE BETTER AV CABLE GOOD Cables not included e DIGITAL e HD VIDEO 1080p e HD AUDIO e ANALOG e HD VIDEO 1080p e STEREO AUDIO e ANALOG e HD VIDEO 1080i e STEREO AUDIO e ANALOG e VIDEO 480i e STEREO AUDIO Maximum resolution Game Console HE uH FR ME CONNECTING A DEVICE AUDIO AND VIDEO CABLE TYPES AV CABLE AV cables or Composite cables are the traditional way of connecting your devices to your TV Video signals are sent over the yellow connector while audio is sent over the red and white connectors e Video resolutions up to 480i Analog connection e Audio and video signals 000 Y IV L R GOOD COAXIAL CABLE Coaxial cables are the traditional way of connecting antennas and cable television signals to your TV Coaxial cables carry both audio and video signals through a single connector e HD video resolutions up to 1080i Analog connection e Audio and video signals Cable Antenna BETTER Le COMPONENT CABLE Component cables are designed to carry HD high definition video signals along with additional audio connections Colors are delivered with color information over three connectors for video separated into red blue and green signals and the left and right audio connectors red and white e HD video resolutions up to 1080p e A
68. the OK button The COLOR CALIBRATION menu is displayed Use the Arrow buttons to highlight Color Tuner and then press the OK button The Color Tuner menu is displayed Color Tuner Red Green Blue Cyan Magenta Yellow Hue 0 0 0 0 25 14 Saturation 1 5 4 0 2 0 Brightness 24 0 22 0 0 0 Offset 0 0 0 Gain 0 0 0 Use the Arrow buttons on the remote to highlight Red Green or Blue Press the OK button to turn the color channel off or on An X appears over a color channel that has been turned off Use the Arrow buttons to highlight another color channel to turn off or on Only two color channels can be turned off at the same time When you are finished with the color channels press the BACK button to adjust additional settings or EXIT To adjust the 11 Point White Balance settings 1 From the Color Tuner menu use the Arrow buttons to highlight Color Tuner and then press the Left Right Arrow buttons until the 11 Point White Balance menu is displayed lt 11 Point White Balance D Gain Red Green Blue 5 0 0 0 2 Usethe Arrow buttons on the remote to highlight the Gain and Color values you wish to adjust Press the OK button and use the Left Right Arrow buttons to adjust the value When you are finished press the OK button to save the setting 3 When you are finished press the BACK button to adjust additional settings or EXIT All changes here are saved to Color Temperature 29 To show or hide the Color Bar Te
69. the Parental Controls menu 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight System and press OK The SYSTEM menu is displayed 3 Use the Arrow buttons on the remote to highlight Parental Controls and press OK 4 Enter your parental passcode If you have not set a passcode enter the default 0000 The PARENTAL CONTROLS menu is displayed 2s To set a custom parental passcode see Changing the Os Parental Control Passcode on page 45 Y 44 Enabling or Disabling Program Ratings To manage program content according to its rating you must enable the Program Rating feature To enable or disable the Program Rating feature 1 From the PARENTAL CONTROLS menu highlight Locks and press OK Type the parental passcode The LOCKS menu is displayed 2 Select On or Off and press OK Locking and Unlocking Channels When a channel is locked it will be inaccessible Locking a channel is a good way to prevent children from viewing inappropriate material To lock or unlock a channel 1 From the PARENTAL CONTROLS menu highlight Channel Locks and press OK The CHANNEL LOCKS menu is displayed 2 Highlight the channel you want to lock or unlock and press OK 3 When achannel is ocked the Lock icon appears locked The channel is not accessible unless the parental passcode is entered 4 When a channel is unlocked the Lock icon appears unlocked Th
70. the base to secure it to the TV 4 When you are finished place the TV on a stable level surface To ensure proper ventilation leave at least 1 of space between the back of the TV and any other objects walls etc Installing the TV on a Wall To mount your TV on a wall you will need a wall mount Consult the information below to find the appropriate mount for your TV D28h C1 model XX Installing a TV on a wall requires lifting To prevent AS injury or damage to the TV ask someone to help you Hole Pattern 100 mm V x 100 mm H Weight w o Stand 8 31 lbs Do not use the screws that come installed in the back of the TV to attach the TV to a wall mount They are too Be sure the mount you choose is capable of supporting the weight short to support the TV and are intended only to secure of the TV After you have determined that you have the correct the back panel and to improve sound quality mount for your TV you can begin the installation To install your TV on a wall 1 Read the instructions that came with your wall mount and make sure that you have four 4 screws of the correct length for the combination of wall mount and TV 2 Disconnect any cables connected to your TV 3 Place the TV face down on a clean flat stable surface Be sure the surface is clear of debris that can scratch or damage the TV 4 Remove the stand by loosening and removing the screws 5 Remove the screws from the wall mount holes o
71. und directly behind the text Background Opacity Change the transparency of the background directly behind the text Window Color Change the color of the closed captioning box Window Opacity Change the opacity of the closed captioning box When you are Satisfied with the appearance of the closed captions press the EXIT button on the remote Text e Opaque background transparent window Only a strip of background appears behind the text expanding as the text appears This is the typical As Broadcast mode Typical choices include e Opaque background and window in the same color When text appears the entire line fills with color at once In the example below the closed caption text is green the background is black and the window is red Background Window CLOSED CAPTIONS SCREEN 39 RENAMING INPUTS USING THE DEVICES MENU Inputs can be renamed to make them easier to recognize on the Input menu see Changing the Input Source on page 20 For example if you have a DVD player connected to the Component input you can rename that input to display DVD Player To change the name of an input i Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight Devices and press OK The DEVICES menu is displayed Highlight the input device that you want to rename and press OK To use a preset input name a Highlight the Input
72. uttons to aa ca image may appear distorted figures appear short and fat e ieee a Normal Normal If the program is already formatted for widescreen viewing Wish TO View and press OR o a 1 85 1 or 2 35 1 then black bars will appear on the top e Normal preserves the content s Panoramic Stretch and bottom of the display image original aspect ratio and size i Ve e Zoom expands images evenly in all directions 33 taller Standard Definition 480i and SS ES and 33 wider with black bars to fit the screen A 720p 480p old TV programs Since ae ee image will fill a 1080p screen the dia hosed ere E MesIaTES Standard Definition Not available enough to fill the TV s screen Note Aspect ratio settings may black bars are added to the left 7YPyMpuisource 720p and 720i HD Fills a 1080p screen and right of the display image e 1080p and 1080i Not available e 720p and 720i HD Fills a 720p or 1080p screen e 1080p and 1080i HD Fills a 720p or 1080p screen e Stretch expands a widescreen image to fill the screen from top to bottom and stretches it half as much from right to left Figures appear tall and thin e Standard Definition Not available 720p and 720i HD If you are watching widescreen 1 85 1 content the image will fill the screen With 2 35 1 widescreen content one sixth of the image is cut off by the left and right sides of the screen e 1080p and 1080i Not available e Panoramic stretches a 4 3 aspe
73. ve Create a 4 digit passcode using the num ber keys on the remote NW Use the Number Pad on your remote to enter your 4 digit PIN Make any desired changes to the picture modes Relock the picture modes if desired You must create a new 4 digit PIN Press the EXIT button to exit the menu screens Deleting a Custom Picture Mode Custom picture modes that are no longer needed can be deleted 3 Inputs assigned to a deleted custom picture mode AY become assigned to the Calibrated picture mode To delete a custom picture mode 1 From the PICTURE MODE MANAGEMENT menu use the Arrow buttons to highlight T dte e select ne Delete buon o S Delete Picture Mode and then press OK The DELETE PICTURE MODE window is displayed 2 Use the Up Down Arrow buttons to select the custom picture mode that you want to delete and then press OK 3 Use the Left Right Arrow buttons to highlight Delete and press OK 4 Press the EXIT button to exit the menu screens 26 Resetting a Preset Picture Mode Reset the picture mode settings for a preset picture mode to the factory default values To reset a customized preset picture mode 1 From the PICTURE MODE MANAGEMENT menu use the Selec reset o restore Sandar Arrow buttons to highlight Reset Eem E Picture Mode and then press OK The RESET PICTURE MODE window is displayed 2 Use the Up Down Arrow buttons to select the customized preset picture mode that
74. y affects the My Picture Settings picture mode The color temperature changes to the Oliver Calibrated and Calibrated Dark picture modes stay as they are To turn color channels off and on Adjusting the Color Tuner Settings The Color Tuner settings allow you to adjust the Hue Saturation and Brightness HSB color and 11 point white balance turn color channels off for testing and display color bar flat and ramp test patterns To adjust the HSB color settings 1 From the PICTURE menu use the Arrow buttons to highlight Color Calibration and press the OK button The COLOR CALIBRATION menu is displayed 2 Use the Arrow buttons to highlight Color Tuner and press the OK button The Color Tuner menu is displayed Color Tuner Red Green Blue Cyan Magenta Yellow Hue 0 0 0 0 25 14 Saturation 5 4 0 2 0 Brightness 24 0 22 0 0 0 Offset 0 0 0 Gain 0 0 0 3 Use the Arrow buttons on the remote to highlight the Hue Saturation Brightness these 3 adjust the color Offset or Gain these two adjust the color temperature of the color you wish to adjust Press the OK button 4 Use the Left Right Arrow buttons to adjust the value When you are finished press the OK button to save the setting 5 When you have finished adjusting the Color Tuner settings press the BACK button to adjust additional settings or EXIT 28 A From the PICTURE menu use the Arrow buttons to highlight Color Calibration and press
75. y if desired and adjust it A new audio mode called Custom is created Press the EXIT button on the remote 32 Deleting the Custom Audio Mode To delete the custom audio mode la Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight Audio and press OK The AUDIO menu is displayed Use the Arrow buttons to highlight Delete Audio Mode and press OK The TV displays To delete the user created custom audio mode select the Delete button Highlight Delete and press OK Press the EXIT button on the remote SETTING TIMERS This TV has timers that save energy can turn off the TV when you go to sleep and can blank the screen when you stream music Setting the Sleep Timer When activated the TV s sleep timer will turn the TV off after a set 1 period of time 1 Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight Timers and press OK The TIMERS menu is displayed From the TIMERS menu use the Up Down Arrow buttons on the remote to highlight Sleep Timer Use the Left Right Arrow buttons on the remote to highlight the period of time after which you want the TV to go to sleep 30 60 90 120 or 180 minutes If you don t want the sleep timer to activate change the setting to Off When you have finished setting the sleep timer press the EXIT button on the remote
76. yer HDMI ARC transmits all digital audio from your TV to your home audio receiver with no need for an extra cable The single HDMI cable also carries digital HD high definition video to your TV The first time you turn on the TV the Setup App will guide you 4 Use the Arrow buttons on the through each of the steps necessary to get your TV ready for use remote to highlight your TV A on source and press OK Before you begin the first time setup e Your TV should be installed and the power cord should be connected to an electrical outlet e Your devices should be connected e If you have a wireless network have the wireless password If you have cable TV select ready whether you have a cable box or ee e If you are connecting to your network with an Ethernet if you connect the TV directly to cable connect it to the Ethernet port on the TV a cable from the wall To complete the first time setup 1 Press the Power button on the remote The TV powers on and the Setup App starts 5 If the TV Signal channel scan screen appears the TV will scan ee for channels which takes several minutes Use the arrow buttons on the remote to highlight Begin Scan and press OK 2 Use Teo on me a ay Otherwise use the Arrow and EMOL MS Veo Ome SSE a OK buttons on the remote to and press OK select the input your TV source is connected to The number of inputs may vary depending on your TV 3 Use the Arr
77. you want to reset and then press OK 3 Use the Left Right Arrow buttons to highlight Reset and press OK 4 Press the EXIT button to exit the menu screens Adjusting the Color Calibration Settings Color Calibration Settings allow you to make precise adjustments to the picture and to create picture modes to save groups of picture settings A The Color Tuner 11 Point White Balance and test patterns allow technicians to manually calibrate the TV Calibration requires specialized training an input with precisely set colors and a specialized light meter To adjust the color calibration picture settings ii From the PICTURE menu use ba VIZIO A the Arrow buttons to highlight z COLOR CALIBRATION Color Calibration and press Picture Mode Calibrated the OK button The COLOR CALIBRATION menu is displayed Use the Arrow buttons to Color Temperature Normal Color Tuner Reset Color Tuner highlight the setting you wish to adjust then press the OK button to change the setting Picture Mode Not directly selectable reference only Color Temperature Not directly selectable reference only Changes to Hue Saturation Brightness Offset and Gain are saved here and indicated with an asterisk Color Tuner Adjust the HSB color RGB offsets and 11 point white balance and display calibration test patterns 2 1 Reset Color Tuner Resets the color tuner settings for the current color temp

VIZIO D28h-C1 LED HDTV User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents