User Manual - SVT Innovations
Contents
1. MW SVT 5100 ACCESS CONTROL FINGERPRINT SVT19120 User Manual Please read this user manual prior to installing the system and keep it well for future use SVT 5100 ACCESS CONTROL FINGERPRINT SPECIFICATIONS WW G 8 i OS ee No Description Technical Parameters Ambient temperature 20 C 60 C Relative humidity lt 95 Operating Voltage DC 14 5V Standby Current lt 90mA Operating Current 120mA Capacity maximum 900 fingerprints INSTALLATION without the rain guard Install into the wall gone Screw hole Screws fix with button case m N INSTALLATION with the rain guard Screw anchors Rain cover Screws e TfL e I Lb Wall hole Screws fix with rain cover WIRING CONNECTION Back _z Qo Power supply Red DC 14 5V o White Unlock button Purple NC COM Lock NO Connect to main board module J1 SVT 5100 ACCESS Enter the setting mode Input the admin code twice default code twice 1234 1234 the yellow LED will be on It is in the setting mode The default code is 1234 Modify admin code In the setting mode Press 3 Yellow light blinks and then enter a new admin code XXXX twice If Bi is heard it means the modification is successful Press to exit the setting mode Notice I2. n case forget the admin code power on first then press in 3 seconds until Bi is heard It means admin code is restored successfully as default setting Restore factory default In the setting mode Press 8 Yellow light blinks and then enter 9 twice A continuous Bi will be heard The factory default is restored Press to exit the setting mode CONTROL FINGERPRINT requires the SVT Remote Control for programming OPERATION Set the unlocking time In the setting mode Press 1 Yellow light blinks and then enter 2 digit number from 01 to 99 Bi is heard and yellow light stops blinking This 2 digit number is the unlocking time For example enter 05 means the unlocking time is 5 seconds Press to exit the setting mode Add fingerprint In the setting mode Press 000 899 Yellow light blinks If red light is on it indicates the position is occupied Press twice to delete the information in this position and then add the fingerprint If green light is on it indicates the position is vacant Fingerprint can be added put the finger on the scanner until a Bi sound is heard Then another Bi and Bi will be heard lt indicates the addition is successful If BiBiBi are heard it indicates the addition fails If BiBiBiBi are heard it indicates the fingerprint exists Press to exit the setting mode Notice Maximum 900 fingerprints Delete the fingerprint In the set
3. ting mode Delete one fingerprint press 000 899 then press twice to delete the fingerprint in 000 899 If light turns green means the deletion is successful Delete all fingerprint press 8 Yellow light blinks and then enter 8 twice A continuous Bi will be heard The deletion is successful Press to exit the setting mode Set security level In the setting mode Press 5 Yellow light blinks and then enter security level number twice Parameter range is 1 2 3 4 5 The higher number indicates the higher accuracy of fingerprint recognition If Bi is heard it indicates the setting is successful If Bi Bi Bi are heard it indicates the setting fails Press to exit the setting mode The design and specifications of this user manual can be changed without any notification to the user All copyright and interpretation rights are reserved to SVT Innovations Inc
Download Pdf Manuals
Related Search