User instructions
Contents
1. If you want to enable disable an event associated with a room select it using the softkeys B and C and tap the softkey D to enable disable it Studio The icon associated with the softkey D will be RIT if the event is already active and will be GJ if the event is to be activated The icon identifying the event will be illuminated when the event is active and will be turned off when it is not 17 Uri nana yi VIMAR Room control 4 7 TEMPERATURE CONTROL If there is an HVAC zone in a room the menu can display the measured temperature modify the type of operation the set temperature and the speed from 1 to 3 of the fan coil 123 3 F Termostato studio As you can see the HVAC zone is composed of three distinct parts the measured temperature is shown on the left a description of the zone in the middle the operating mode on the right Tapping the softkey D displays a list of the menus used to control the selected HVAC zone N B Regardless of the initial operating mode each menu in the list has a different order for displaying the screens lermostato Studio At the graphical user interface level the thermostat and the temperature probe behave in a similar way it will then display e Current temperature e Temperature measured by the external sensor connected to the thermostat input if fitted e Relative humidity measured by the electronic humidity sensor if fitted e Speed of fan coll Mees2. 15 C in winter Using the softkeys B and C select MIN and confirm by tapping the softkey D ti Termostato Studio Using the main menu of the HVAC zone you can set the desired temperature and the speed of any fan coils 25 VIMAR Room control Timed reduction Using the softkeys B and C select ABN and confirm by tapping the softkey D Using the softkeys B and C set the duration of time in which the thermostat will work on reduction and at the end of which it will revert to the previous operating mode short pressure single increase or decrease long pressure gradually faster increase or decrease Tap the softkey D to confirm your setting lermostato Studio Using the main menu of the HVAC zone you can set the desired temperature and the speed of any fan colls 26 VIMAR Room control OFF Using the softkeys B and C select OFF and confirm by tapping the softkey D lermostate Studio Timed OFF Using the softkeys B and C select Mas SN and confirm by tapping the softkey D Using the softkeys B and C set the interval of time in which the thermostat will be off and at the end of which it will revert to the previous operating mode short pressure single increase or decrease long pressure gradually faster increase or decrease Tap the softkey D to confirm your setting Antifreeze This mode which can only be used on heating permits setting a minimum temperature leve
3. if fitted 18 VIMAR Room control e Current setpoint e Output status on off and when present with boost e Alarm symbol of an external probe used as a screed alarm in an underfloor system Ae e Manually setting the temperature Using the softkeys B and C select and confirm by tapping the softkey D Using the softkeys B and C set the temperature short pressure single increase or decrease long pressure gradually faster increase or decrease Tap the softkey D to confirm your setting CAUTION a f the current operating mode is AUTO the thermostat switches to TIMED MANUAL mode and you need to set the duration of this mode 19 VIMAR Room control Using the softkeys B and C set the time interval at the end of which the thermostat will return to the previous operating mode short pressure single increase or decrease long pressure gradually faster increase or decrease Tap the softkey D to confirm your setting f the thermostat is in any of the other operating modes no confirmation will be displayed after setting the new temperature value Termostato Studio e Setting the fan coil speed where applicable Using the softkeys B and C select and confirm by tapping the softkey D Termostato Studio Termostato Studio Using the softkeys B and C set the speed short pressure single increase or decrease long pressure gradually faster increase or decrease It is also poss
4. A and D then you make the switch Dimmer RGB Salotto e Lamp adjustment In this case the degree of illumination is adjustable level displayed by the scroll bar and the color is fixed Dimmer RGB Salotto Using the softkey B and C sets the degree of illumination tapping and holding your finger on the softkey increase or decrease lifting your finger off the softkey stops the adjustment at the desired level Tapping the softkey D confirms the adjustment made 12 Uri Ge Anno ut VIMAR Room control Dimmer feature when it is combined with the Brightness Sensor If the system is fitted with a brightness sensor combined with art 01467 you can keep the brightness in a room automatically constant according to the value read by the sensor and a brightness setpoint that is set automatically with each adjustment on the dimmer The function of keeping the brightness constant can be switched on off at any time by touching the softkey cor responding to na In this case the controls become the same as for any other dimmered lighting point This function then allows obtaining energy savings as natural light is used as long as possible instead of artificial light for lighting the room On the touchscreen the dimmer combined with the brightness sensor can be added to any room screen and the view is similar to the following Luce dimmer con sensore Luce dimmer con sensore 13 VIMAR Room control 4 4 CONTRO
5. By me control panel Tapping the softkey D displays the screen for entering the password that provides access to the system on off partition controls Using softkeys B to enter the number and C to move on to the next one enter the password Tap the softkey D to confirm the display will show a list of the available partitions which may be different depend ing on the password you entered 33 VIMAR Intrusion detection alarm system Icons and aan are associated with the control for switching the entire system on and off Scrolling through the list using the softkeys B and C pre activates or pre deactivates the desired partitions to confirm the changes and then the system status change tap the softkey D 34 Uri Ge Anno ut VIMAR Load control Standard conformity 6 LOAD CONTROL Via the main menu select the May icon using the softkeys B and C and confirm by tapping the softkey D the display shows the instantaneous power consumed by the system and the state of the controlled loads in addition if the same system is also monitoring a production system the instantaneous power produced in the system will be displayed Energy consumed 2 8 kW Energy produced 2 3 kW Oven Vacuum cleaner Washing machine On tapping the softkey D the display will show a list of the controlled loads Forno Using the softkeys B and C select the desired load tapping the softkey D activates the selected lo
6. environment Studio Dimmer RGB Salotto Managing monochromatic lamps The monochromatic lamps are managed in the same way as for traditional lighting Managing RGB lamps The video touch screen enables managing switching on off adjusting changing the hue saturation and bright nessof the RGB lamps and it will also be possible to activate change the Fading Show application Depending on the operating mode the adjustment icon will be displayed as follows e Lamp ON In this case the degree of illumination is constant no adjustment and the colour is fixed Touching the softkey D is carried OFF Dimmer RGB Salotto 10 VIMAR Room control When the lamp is on you can also make the color settings Select the icon using the softkey C and confirm by tapping the softkey D Dimmer RGB Salotto Dimmer RGB Salotto Using the softkey B and C sets the color tapping and holding your finger on the softkey moving the cursor over the color bar lifting your finger off the softkey stops the adjustment at the colour level Tapping the softkey D confirms the adjustment made Select the icon using the softkey C and D is accessed the Fading Show application Dimmer RGB Salotto AUTO ta ai Tapping the softkey D is activated the Fading Show application and the lamp provides illumination with color sequence configured in the central 11 Uri nana yi VIMAR Room control e Lamp OFF Touching the soft keys
7. L OF SHUTTERS BLINDS WITH SLATS Using this menu you can open close the shutters and blinds and set the angle of the slats Shutters Studio Tapparelle Tapping the softkey D displays the control menu Studio Studio Tapping the softkey A stops opening closing the shutter in the desired position Softkeys B and C activate closing and opening respectively Tapping the softkey D confirms the adjustment made the shutter goes into the set position 14 VIMAR Room control Venetian blinds with slats LE al Weneziane con lamelle Tapping the softkey D displays the menu that lets you choose whether to open close the blinds or adjust the position of the slats Veneziane con lamelle Veneziane con lamelle Use the softkeys B and C to select the desired function and confirm by touching the softkey D Veneziane con lamelle Veneziane con lamelle a Yy A Re 15 A VIMAR Room control Tapping the softkey A stops opening closing the Venetian blind or slats Softkeys B and C activate closing and opening respectively Tapping the softkey D confirms the adjustment made the blind and slats go into the set position 16 VIMAR Room control 4 5 SCENARIOS If you want to activate a scenario in a room select it using the softkeys B and C and tap the softkey D Studio E o Fuori di giorno The icon identifying the activated scenario will illuminate for approximately 10 seconds 4 6 EVENTS
8. User instructions By me automation module for video door entry unit by me VIMAR Uri Ge Ann nn VIMAR Contents CONTENTS Te The BY MEMOAU Sciorenza poni barbaro aangnonala ba daglepnsaorrosslohe 1 2 IDESCUDUON ae 2 crd ct 2 Es 11 ART RT a Sele Rome automaion SYSICIMN ESOS arrob 3 IEEE 0 20 3 TEMPE esse 4 CHI sonori 4 eco sibile S ale Video door enim Uni SSNS creare o PUC OE 5 CICCO aaa s di ROOM COMMON ice ae 6 NEC aa r ae alo EE A e aes E T 7 4 3 Managing monochromatic and AGB AMS seriada dada 10 Aa CONTOl O SAUS DIMESSI error ica 14 LOSE ino EE ea A 17 AE leale I IA 17 4 Temperatul COMTOL sino roda alos 18 LOG aimara 30 5 intrusion detection alarin SYSTEM airis od A A A A 30 T Regulatory COMPNANCE sonia tours na 35 Uri Ge Anno ut VIMAR The By me module 1 THE BY ME MODULE The module 01965 is a device that the installer integrates in the video door entry unit 19558 so as to be able to control not only the video door entry unit system but also all the functions of the By me automation system The following figure which illustrates the video door entry unit 19558 complete with the By me module 01965 highlights the softkeys touch buttons that are used to perform all the operations for home automation system control and management A VIMAR Description Main menu 2 DESCRIPTION In a system where both the By me automation system and the Due Fili Two Wire video door entry system are ins
9. ad and the corresponding warning light will come on Tapping the softkey D again when the load is ON will deactivate the load 7 STANDARD CONFORMITY EMC directive Standard EN 50428 35 VIMAR Viale Vicenza 14 36063 Marostica VI Italy Tel 39 0424 488 600 Fax Italia 39 0424 488 188 800 862307 C Fax Export 39 0424 488 709 01965 EN 03 1503 www vimar com VIMAR Marostica Italy
10. adjustment made the lighting point takes on the set status Studia Luce dimmer TULL VIMAR Room control Dimmer type 2 The display shows simple increase and decrease icons instead of the horizontal progress bar Tapping the softkey A switches the lighting point on off Using the softkeys B and C you set the brightness tapping and holding your finger on the softkey increase or decrease lifting your finger off the softkey stops the adjustment at the desired level Tapping the softkey D confirms the adjustment made the lighting point takes on the set status Studio Note that on the right side of the adjustment icons the display shows the percentage of brightness if the lighting point is on or the word OFF if the lighting point is off A VIMAR Room control 4 3 MANAGING MONOCHROMATIC AND RGB LAMPS This lights management mode which can only be used if the By me home automation system is equipped with dimmers dedicated lamps and ballasts by switching on off and controlling brightness provides efficient lighting in the rooms while ensuring optimization of energy savings The new RGB functions patented by Vimar enable creating colour changes and elegant sophisticated light effects You can also call up scenarios involving different functions in the home automation system such as for example combinations of lights and colours matched to your favourite music to create a personalized comfortable
11. d to it may be absent if the humidity control is disabled on the setpoint adjustment screen Touching the softkey corresponding to ne displays the screen for setpoint adjustment minimum value 20 maximum value 80 and for switching the output control on oft Umidit salotto xy 29 Uri nana yi VIMAR Room Control 4 8 SOUND SYSTEM If there is a Sound system zone in a room this menu allows you to control the audio signal and the corresponding sound sources As you can see the audio zone is composed of three distinct parts the icon associated with the sound system is displayed on the left lit if the system is ON off if it is OFF the name of the zone in the middle the icon for the type of audio source you are using on the right If the audio zone is OFF tapping the softkey D displays the screen used to activate the zone If the audio zone is ON tapping the softkey D directly displays a list of the zone controls 30 VIMAR Room Control Audio studio studia Tapping the softkey D activates the zone and displays all the available audio control functions e Adjusting the audio volume Using softkeys B and C select En ey A ici Shadi a MINIMI Using the softkeys B and C set the volume whose level will be highlighted by the horizontal bar and by the numeri cal percentage shown on the right short pressure single increase or decrease long pressure gradually faster increase o
12. escription of the function on the right the state of the function where applicable After selecting the desired function with the softkeys B and C with the softkey D you can activate deactivate the selected function or access its submenu The various types of functions and commands associated with them are now illustrated rie Anne VIMAR Room control 4 1 ON OFF CONTROLS If the lighting point is the ON OFF type control is directly from the main screen of the room with the softkey D ON if the lighting point is off and OFF if it is on Luce On Off 4 2 ADJUSTMENT CONTROLS DIMMER Luce dimmer In the case of an adjustable lighting point dimmerable on tapping the softkey D the display will show the control mode that allows switching on off and dimming the lighting point There may be two adjustment modes depending on the configuration made by your installer and they are as described on the following page VIMAR Room control Dimmer type 1 The display shows an incremental progress bar that during the adjustment indicates the percentage of brightness Tapping the softkey A switches the lighting point on off Using the softkeys B and C set the brightness whose level will be highlighted by the horizontal bar short pressure single increase or decrease approximately 5 of the original brightness long pressure gradually faster increase or decrease Tapping the softkey D confirms the
13. firm the setting the display will show the screen used to copy the daily programme you have just changed onto one or more of the remaining days of the week or end the editing stage 102 3 94 3 75 0 lz 15 1 PP Copy 1 gt 2 102 37 94 3 75 0 de t n Y e Selecting the MW T2 and T3 e All the above operations are performed using the softkeys A B C and D 23 VIMAR Room control Manual On selecting this mode with the main menu of the HVAC zone you can set the desired temperature and the speed of any fan coils IN and confirm by tapping the softkey D Using the softkeys B and C select Termostato Studio imed manual On setting this mode the thermostat will work in Manual mode for a certain period of time after which it will revert to the previous operating mode Using the softkeys B and C set the time interval at the end of which the thermostat will return to the previous operating Mode short pressure single increase or decrease long pressure gradually faster increase or decrease Tap the softkey D to confirm your setting 24 VIMAR Room control Termostato Studio Using the main menu of the HVAC zone you can set the desired temperature and the speed of any fan colls Reduction This mode is useful when you are away from home for a long time or for setting the manual temperature typically used at night e g
14. he details on this menu please see the user manual of the video door entry unit 19558 3 1 3 CLEANING FUNCTION This function allows you to clean the video door entry unit without involuntarily pressing the softkeys that may cause undesired operation Select the icon using the softkeys B and C and confirm by tapping the softkey D Once the function has been activated the softkeys are disabled for 15 seconds after which the video door entry unit returns to its normal conditions of use Periodically clean the video door entry unit with a soft dry cloth Do not use any solvents or detergents A VIMAR Room control 4 ROOM CONTROL From the main menu select the icon g using the softkeys B and C and confirm by tapping the softkey D you will see the menu used to select the different rooms of the plant and control the devices associated with them lights shutters HVAC etc The configuration of the rooms is solely for the installer who will customize them to suit your needs Studio Each room is characterized by an icon that identifies its type type of room or group of functions For example after selecting the room called Studio with softkeys B and C and confirming with D the display will show a list of all the functions associated with this room tuce On Off As you can see each function consists of three distinct parts on the left there is the icon associated with the function in the middle a d
15. ible to turn off the fan coil by selecting OFF or to set it on AUTO mode in this case the speed is defined according to the difference between the read temperature and the set temperature Tap the softkey D to confirm your setting 20 VIMAR Room control e Setting the operating mode Using softkeys B and C select RS OFF Termostato Studio Tapping the softkey D displays the menu that allows you to select the operating mode of the HVAC zone AUTO Termostato Studio This menu lets you change the HVAC programmes for automatically controlling the heating and air conditioning previously configured on the control panel It will then be possible for each day of the week to set the value of the temperature levels 11 12 and 13 where in the heating and air conditioning programmes the values of these levels are always differentiable 21 VIMAR Room control Termostato Studio e The screen below shows the programme for the first day to set to display the next or previous one tap the softkeys B and C respectively HA HA l F gt ho iy f e Once you reach the day of the week for which you want to change the programme tap the softkey D to activate edit mode in this mode you can move among the hours of the day in 20 minute intervals change the setpoint T1 T2 T8 copy the set values to the next interval and confirm the changes 22 VIMAR Room control e After tapping the softkey D to con
16. icon eJ lastly selecting the icon Eu will activate the Cleaning function that is useful in order to safely clean the video door entry unit 3 1 1 HOME AUTOMATION SYSTEM SETTINGS Select the icon using the softkeys B and C icons BS and and confirm by tapping the softkey D icon e Time and Date Select the icon using the softkeys B and C and confirm by tapping the softkey D Uri nana yi VIMAR Main menu E Domenica 03 04 2012 Using the softkeys B and C set the hours minutes day month year short pressure single increase or decrease long pressure gradually faster increase or decrease e Temperature unit Select the icon NS using the softkeys B and C and confirm by tapping the softkey D Using the softkeys B and C select the unit of measurement in which the temperature of the various rooms of the system will be displayed e Configuration Using this menu icon COL you configure the video door entry unit with the By me module in the automation system This operation is solely for the installer Uri Ge Anno ut VIMAR Main menu e Information Select the icon using the softkeys B and C and confirm by tapping the softkey D a screen will appear showing the software release and the hardware specifications of the video door entry unit and the By me module 3 1 2 VIDEO DOOR ENTRY UNIT SETTINGS Select the icon using the softkeys B and C and confirm by tapping the softkey D For all t
17. l so as to avoid damage to the pipes or to prevent the temperature from falling under a safety level Using the softkeys B and C select HN and confirm by tapping the softkey D 27 VIMAR Room Control Termostato Studio e THER TYPES OF ADJUSTMENTS The By me automation module 01965 lets you make other types of proportional adjustments that are not neces sarily related to the lighting a viewing example can be as follows dittuatore proporz xy O INNI If the actuator is OFF the display will show O ox If there is a fault on the output that you are adjusting the associated control will display a specific warning instead of the adjustment value 28 Uri Ge Anno ut VIMAR Room Control If the system includes the device with 3 analogue inputs 01467 which is connected to a dedicated sensor the room control screens may display one or more instantaneous values of different variables measured by the sensor The variables that can be viewed which can be brightness wind speed barometric pressure relative humidity air quality air flow voltage electric current power amount of rainfall and temperature are shown as follows Pata Umidit salotto xy If the displayed variable is relative humidity and when envisaged by the system you can set a setpoint on exceed ing which a special alarm will be displayed and activated when needed On the previous screen notice that the ON OFF output status indicator linke
18. r decrease Tap the softkey D to confirm your setting e Selecting the audio source Using softkeys B and C select The icon indicates the possibility of sequentially selecting the available audio sources while the icon of the selected source is shown on the right 31 VIMAR Room Control Audio studio 105 75M Hz Audio studio Audio studio Tap the softkey D repeatedly until the desired audio source is displayed When selecting the FM tuner the IR module EJ or the docking station El the display will show another option that with the softkey D allows you to select the radio station from the saved ones FM tuner select the song IR module and docking station Audio studio 32 VIMAR Intrusion detection alarm system 5 INTRUSION DETECTION ALARM SYSTEM From the main menu select the icon using the softkeys B and C and confirm by tapping the softkey D the display will show a representation and the status of any partitions the system status on off partitioned and whether there are one or more alarms The active zones are shown in green while the alarm zones are shown in red In the event of an alarm the alarms list up to a maximum of three is displayed under the partitions grid and identi fies the alarm zone the time and the icon associated with the type of alarm For more details on alarms please refer to the Alarms list menu on the control panel see par 7 of the user manual of the
19. talled with video door entry unit 19558 module 01965 expands the functions of the video door entry unit while allowing control of lights blinds HVAC sound system scenarios automated functions events and load control If the intrusion detection alarm system is also installed the video door entry unit allows you to control the plant with similar modes and features to those of a digital keypad 3 MAIN MENU The main menu for managing the home automation system that is displayed when module 01965 is connected to the video door entry unit 19558 shows the following three icons Load Control if installed in the system Automation Intrusion detection alarm system if installed in the system On the bottom bar of the main menu there are four icons associated with the corresponding four softkeys of the video door entry unit in particular e icon softkey A access to the Settings menu e icon KJ softkey B move to the left among the functions e icon gt softkey C move to the right among the functions e icon softkey D icon for access to the submenu of the selected function The following menus will also show the icon associated with the softkey A that will allow you to view the preceding menu A VIMAR Main menu 3 1 SETTINGS Tapping the softkey A displays the Settings menu From this menu you can make all the settings related to the home automation system icon Val and to the video door entry system
Download Pdf Manuals
Related Search