S55 L2 Service Manual2015-05-08 23:041.4 MB
Contents
1. Plug In 1 8 V or 3 V SIM card Phase II e To insert the SIM the battery pack must be removed e The SIM reader coding will be realized by lower case e A triple band PIFA antenna will be an integral part of the mobile phone Bluetooth Antenna e A PCB antenna Material FR4 SMD component vee thickness 4 mm will be soldered on the main PCB Operating range Approx 10 m Receiver Sensitivity e EGSM 102 dBm Specification static and with fading e PCN 102 dBm Specification static and with fading The reception sensitivity must comply with the corresponding GSM recommendations in all operating conditions temperature battery level EGSM measurements according typical sensitivity are not yet available PCN measurements according typical sensitivity are not yet available Measurement values are referred to the external antenna connector Speech Coder e Full Rate Enhanced Full Rate Adaptive Multi Rate and Half Rate speech coders are available as standard Copyright Siemens Pte Ltd Siemenes Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 7 of 28 Internal Service Use Only SIEMENS Pte Ltd gnant S55 57 Level 2 Service Manual S Display Type Full Graphic Resolution 101 X 80 Pixel Illumination 2 White LED Active area mm 29 379 x 25 265 Visible area mm max 32 4 x 28 9 Technology Colour STN Contrast Adjustable Transmitter Power EGSM nominal 2W Specification Cla2. Siemens Pte Ltd Siemenes Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 9 of 28 Internal Service Use Only SIEMENS Pte Ltd SIEMENS S55 57 Level 2 Service Manual Mobile 7 ACCESSORIES Due to changes on the connector from Lumberg to Slim Lumberg accessories using the old Lumberg connector will not be able to be used on the new Slim Lumberg platform a Preliminary L55 Accessories 2002 L55 Accessory Program Data Applications Jata cable Innovations compatible to L55 7 SP55 Java CI Za Tunaand Martin only bundling in APAC only created by IA AS Information and ICM MP IA AD PM November 2001 Communications Note PS note that this is only a Preliminary specification for the actual specification PS refer to the E commerce Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 10 of 31 Internal Service Use Only SIEMENS Pte Ltd SIEMENS S55 57 Level 2 Service Manual Mobile 7 1 Accessories Part Number Accessories Part Number Note For ALL ACCESSORIES PART NUMBERS PS refer to the E Commerce for the latest updated copy Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 11 of 31 Internal Service Use Only SIEMENS Pte Ltd SIEMENS S55 57 Level 2 Service Manual Mobile 8 UNIT DESCRIPTION L55 MARLIN Marlin is designed as a sin
3. d sden pJEH WY uo penj weg Gte l l nn uo panj puanboer saw od Sav od awel u isag 195071 Jayeadg L L a alian awanan A iu er ee Tens ee B i i a 9 T I JA kaa bima T T T TT on vo panj paziueneb say aaa Jayeads 0201 0701 0501 090 0 01 0801 0044 Jango sawd Janboe yaaoy app Siemens Techincal Support Center Copyright Siemens Pte Ltd All rights reserved Internal Service Use Only 13 of 31 ICM MP CCQ ASP ASC SIEMENS Pte Ltd rr S55 57 Level 2 Service Manual wa 9 DISASSEMBLY OF 55 56 57 Front view of the 855 56 57 Back view of the 855 56 57 Remove the battery by lifting it upwards Remove the battery by releasing the catching amp lifting it up sideway simultaneously Remove the SIM card by sliding it upwards in the direction shown Remove the four screws on the back of the phone as indicated by the red circles Separate the front amp back casing by lifting the back casing upwards Always ensure that it is opened back first or the front casing might be The separated S55 56 S57 damaged Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 14 of 31 Internal Service Use Only SIEMENS Pte Ltd S 55 57 Level 2 Service Manual The keypad can be further seperated from the front casing using a tweezer as per diagram AS The keypad module can be furth
4. Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 27 of 31 Internal Service Use Only SIEMENS Pte Ltd satre S55 57 Level 2 Service Manual S gt After an successful verification pass the defective item to the responsible troubleshooting group gt Ifthe fault description can not be verified perform additional tests to save time and to improve repair quality Switch on the device and enter PIN code if necessary unblock phone Check the function of all keys including side keys Check the display for error in line and row and for illumination Check the ringer loudspeaker acoustics by individual validation Check the IRDA Interface Camera and Bluetooth Perform a GSM Test as described in chapter 3 7 Check the storage capability gt Check internal resistance and capacity of the battery gt Check battery charging capability of the mobile phone gt Check charging capability of the power supply gt Check current consumption of the mobile phone in different mode Visual inspection gt Check the entire board for liquid damages gt Check the entire board for electrical damages gt Check the housing of the mobile phone for damages SW update gt Carry out a software update and data reset according to the master tables and operator customer requirements Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 28 of 31
5. e Power Time Template 11 RX GSM900 e high TCH e RX Level e BS Power 102 dBm e 50 Frames e middle BCCH e BER Class II e BER Erased Frames 12 Handover to GSM1800 Including Handover Check 13 TX GSM1800 high TCH e Frequency Error e GSM Spec e PCL e Phase Error RMS e BS Power 55 dBm e Phase Error Peak e middle BCCH e Average Power e Power Time Template 14 RX GSM1800 e high TCH e RX Level e BS Power 102 dBm e 50 Frames e middle BCCH e BER Class H e BER Erased Frames Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 30 of 31 Internal Service Use Only SIEMENS Pte Ltd SIEMENS 855 57 Level 2 Service Manual TE 16 Handover to GSM1900 Including Handover Check 17 TX GSM1900 e Frequency Error e Phase Error RMS BS Power 55 dBm e Phase Error Peak e middle BCCH e Average Power e Power Time Template 18 RX GSM1900 e high TCH e RX Level e BS Power 102 dBm e 50 Frames l e BER Class II e BER Erased Frames 19 Echo Test e BS Power 70 dBm e middle BCCH Final Inspection The final inspection contains 1 a 100 network test location update and set up call 2 Refer to point 3 3 3 arandom sample check of data reset if required optical appearance complete function 4 Check if PIN Code 1s activated delete PIN Code if necessary Basis is the international standard of DIN ISO 2859 Use Normal Sample Plan Level II and the
6. greeting text short dial list etc required by the operator s or service provider s Therefore it is not uncommon to have some menu item s differ in different variants or are not visible at all These settings are stored in different memory area of the mobile and will be activated depending on the customer specific model or variant of the phone by a separate test step during the production process Due to this separation of common mobile software and customer specific initialization it is possible to fulfill the demands of the market requiring customization and flexibility As a consequence the software programming process in the LSO is divided into two different steps as followed Software update to actual version and appropriate language group Programming of CUSTOMER SPECIFIC INITIALIZATION Boot Adaptor AC Adaptor FIGURE 2 24 55 SERIES SOFTWARE PROGRAMMING SETUP Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 17 of 31 Internal Service Use Only SIEMENS Pte Ltd gnant S55 57 Level 2 Service Manual S 12 1 MOBILE SOFTWARE UPDATING The software of the mobile L55 series is loaded from a PC directly Hardware interconnection between the mobile and the PC is shown in Figure 2 24 Because of the new type of external connector used in L55 series Slim Lumberg type an additional adaptor cable between mobile and boot adaptor is required Table 2 1 listed all the hardwar
7. 200 h 150 h Up to 200 h Up to 270 h Up to 250 h Time Talk Time Upto 4h Upto 5h Upto 6h Battery Li Ion LI Thin LI Ion Battery Pack LI Ion Battery Pack Type 600 mAh 540 mAh Nominal Cap 840 mAh Nominal Cap 750 mAh Weight approx 116 g M35 approx 85 g approx 99 g ME45 ae 95 g Pee Ti ones approx 99 cm S35 approx 69 cm S45 117 9 mm S35 external antenna 108 9 mm S45 Width 44 0 45 8 mm M35 42 46 mm 42 5 45 5 mm ME45 42 0 46 0 mm Thickness approx 21 3 mm M35 Approx 17 mm 19 5 20 5 mm ME45 17 5 18 9 mm pe ecam PM Ta Antenna 0 dB 900 MHz 0 4 dB 900 MHz 0 4 dB 900 MHz 0 4 dB 900 MHz Perform 0 3 dB 1800 MHz 0 3 dB 1800 MHz 0 5 dB 1800 MHz 0 3 dB 1800 MHz relative to painted upper case 0 3 dB 1900 MHz C25 compared to S40 SAR 1 5 W kg 900 MHz 1 0 W kg 900 MHz o to 0 8 W kg 1800 MHz 0 8 W kg 1800 MHz Yes Enhanced angan PPP GPRS Yes class 8 Yes class 8 class 10 tbc until S2 o LED o Display FSTN annan dot matrix 6 FSTN mena dot matrix 6 FSTN baan dot matrix 6 CSTN hiatal dot matrix 6 Display lines graphic icons lines graphic icons lines graphic icons lines graphic icons Illumination amber amber amber white Min 95 dB A 5cm min 95 dB A 5 cm Min 95 dB A 5cm Min 95 dB A 5cm Typ gt 100 dB A 5cm Typ gt 100 dB A 5cm Typ gt 100 dB A 5cm Max 125 dB A human ear Copyright
8. Internal Service Use Only SIEMENS Pte Ltd SIEMENS S55 57 Level 2 Service Manual Mobile GSM Test Connect the mobile board via internal antenna antenna coupler and external antenna car cradle to a GSM tester Usea Test SIM Skip GSM 900 GSM1800 or GSM1900 test cases if not performed by the mobile phone Test case Parameter Measurements Limits 1 Location Update e GSM900 e individual check e BS Power 55 dBm e middle BCCH 2 Call from BS e low TCH e Ringer Loudspeaker check e individual check PCL 5 e BS Power 55 dBm e middle BCCH 3 TX GSM900 e low TCH e PCL 5 e BS Power 55 dBm e Phase Error Peak e middle BCCH e Average Power e Power Time Template 5 TK GSM1800 e low TCH e PCLO e BS Power 55 dBm e Phase Error Peak e middle BCCH e Average Power e Power Time Template 7 TX GSM1900 e low TCH e PCL 0 e BS Power 55 dBm e Phase Error Peak e middle BCCH e Average Power e Power Time Template Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 29 of 31 Internal Service Use Only SIEMENS Pte Ltd SIEMENS 855 57 Level 2 Service Manual TE Test case Parameter Measurements Limits 9 Call from MS e GSM900 e Keyboard check e individual check e high TCH e PCL 6 BS Power 55 dBm e middle BCCH 10 TX GSM900 e high TCH e Frequency Error e GSM Spec e PCL 6 e Phase Error RMS e BS Power 55 dBm e Phase Error Peak e middle BCCH e Average Power
9. 000 12 8 1 S55 56 57 MECHANICAL DIAGRAM 13 9 DISASSEMBLY OF S55 56 57 ccccccccccccccccccccccccccccccccccccccccces 14 10 REASSEMBLY OF S55 56 57 ccccccccccccsccccccccccccccccccccccccccccecs 15 11 SPARE PARTS amp PART NUMBERGW ccecscsese 16 12 MOBILE SOFTWARE PROGRAMMING u cececcecece 17 12 1 MOBILE SOFTWARE UPDATING ccc ccc cccccacecccccceceeccaeeceneaceneas 18 12 2 FLOW CHART FOR S W UPGRADING e e eee e eee eaaa eaaa eaaa eaaa eaaa eea eee 19 13 SIEMENS SERVICE EQUIPMENT USER MANUAL 20 13 1 INTRODUC ION asantun anaa aka aaa nga a da ga La a aa aaa aan Sa a aaa b aka a aaa aa aa ga aaa aii 20 13 2 SIEMENS MOBILE SERVICE EOUIPMENT cere eaaa eaaa eaaa eaaa eea eaaa eaaa 20 li TM saba Sa an EE KA E a a aa BA a a aa aa BG a a a aaa 20 15 General Testing InfoOrmation c cc ccceecccceccccccscscccccceecs 24 Copyright Siemens Pte Ltd Siemenes Techincal Support Center All rights reserved ICM MP CCQ ASP ASC Contents Page Internal Service Use Only SIEMENS Pte Ltd SIEMENS S55 57 Level 2 Service Manual Mobile 1 GPRS GENERAL PACKET RADIO SERVICE PRS is a new non voice value added services that allows information to be sent and received across a GSM mobile telephone network It supplements today s Circuit Switched Data CSD and Short Message Services SMS GPRS involves overlaying a packet based ai
10. 2 1 e vCalendar V1 0 3 6 Message size A message size of 40 kBytes MO and MT will be guaranteed 3 Not supported features AMR encoding Read reply report Delivery report BCC addressing MMS templates OTAP of MMS parameters Copyright Siemens Pte Ltd Siemenes Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 5 of 28 Internal Service Use Only SIEMENS Pte Ltd SIEMENS S55 57 Level 2 Service Manual Mobile 4 BLUETOOTH OVERVIEW Bluetooth is a low power short range wireless networking standard designed for local area voice and data communications Mobile computers mobile phones and headsets PDAs and PCs will all exchange information using the specification agreed to by the over 2 400 companies in the Bluetooth Special Interest Group SIG The SIG companies are working together to ensure interoperability between products and include some of the top brands in wireless names like 3Com Ericsson IBM Intel Lucent Microsoft Nokia Toshiba and Motorola Bluetooth is a global de facto standard for wireless connectivity Based on a low cost short range radio link Bluetooth cuts the cords that used to tie up digital devices When two Bluetooth equipped devices come within 10 meters range of each other they can establish a connection together And because Bluetooth utilizes a radio based link it doesn t require a line of sight connection in order to communicate Your laptop could send information to a print
11. 2 Service Manual Mobile 13SIEMENS SERVICE EQUIPMENT USER MANUAL 13 1 Introduction Every LSO repairing Siemens handset must ensure that the quality standards are observed Siemens has developed an automatic testing system that will perform all necessary measurements This testing system is Known as 13 2 Siemens Mobile Service Equipment Using this system vastly simplifies the repair of the phones and will make sure that 1 All possible faults are detected 2 Sets which pass the test will be good enough to return to customer Starting from the P35 Series Siemens will introduce a simpler and faster testing platform for testing a repaired Siemens mobile phone The testing platforms are either base on R amp S CMD 53 55 CMU200 or CTS55 30 GSM test set There is also test software under development for testing with the Willtek 4400S 4201 2S and the 4107 GSM test set THE LSO WILL HAVE TO PURCHASE THE SYSTEM CHOOSING BETWEEN THE COMPLETE PACKAGE OR SUB SET OF IT A FULLY AUTOMATIC TEST PROCEDURE IS ONLY POSSIBLE IF THE COMPLETE SYSTEM IS INSTALLED Make sure that your CTS firmware is Version 3 01 or higher For CMD 55 it must be Version 4 03 and higher Please check with the Service Info SB_0500 for the CTS CMD Hardware Options Please refer to the technical support webpage in the ecommerce website for test equipment related information Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights rese
12. BE INSPIRED 9535 56 57 Performance with an ATTITUDE SIEMENS Pte Ltd SIEMENS S55 57 Level 2 Service Manual Mobile TABLE OF CONTENTS 1 GPRS GENERAL PACKET RADIO SERVICE oo0o000000000000000 1 2 K JAVA APPLICATION ccccccccccccccccccccccccccccccccccccccccccees 2 3 MMS MULITMEDIA MESSAGING oo0000000000000000000000 00000000000000 3 3 1 STANDARD COMPLIANCE 3 a BEARR 5 cree ccc cree oats sea ine at a a a E aa a NGGE ag Ba aaa a a ga E b a aana 3 29 DOPA aaa aaa aa aa a ana E aan TENGE E A a a En A a aaa aa a ang Ja daa an 3 34 PRESENTATION senat apaa aa ia gana a gana Bg wae aa ka ak gg D Gada gg A KN a a gan E BA Sa da IE Wg da BE 3 3 5 SUPPORTED MEDIA TYPES AND FORMATS cceccececcccececcceccaceccacetecteueeeneneaces 4 3 5 1 Text part of presentati n 5 aaa kae kak AKA AN ENI WA eink KEN KANGENE NG KA KANA KNA KAR AN EA BA AAN AENG KERANA EKA KAN 4 3 5 2 Audio part of presentation T 4 3 5 3 PIM no part of presentation will be available via the start screen eee eee 5 3 6 MESSAGE SIZE 5 3 7 NOT SUPPORTED FEATURES 5 4 BLUETOOTH OVERVIEW eeessesssoesoecsooccooesooccoocsoocsooccsocesoeesosscooe 6 5 KEY BRA TRR 7 6 COMPARISON WITH PREVIOUS PRODUCTS 9 7 PC COS SOUR UES a kaa anan nga aan aa aaa Kanan BAT Da a GA Ba aa a Ka a E aa GAN E ak a a a Aa 10 7 1 ACCESSORIES PART NUMBER e 11 8 UNIT DESCRIPTION L55 TUNA o00000000000000000 0000000000 0000000000000
13. Quality Border 0 4 for LSO Remark All sample checks must be documented Attachment Sampling xls Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 31 of 31 Internal Service Use Only
14. a MM contains a SMIL document and the MM is opened with the multi event icon the presentation starts automatically After the presentation stops the phone will display a separate start screen This screen will show the following elements e Sender e CC e Subject e Availability of SMIL presentation e List of MM elements not included in presentation Out of this list you can select and store all elements provided in the list to the internal file system 3 5 Supported media types and formats Image part of presentation JPEG baseline with JFIF as exchange format GIF 87a and GIF89a including animated GIF WBMP BMP e PNG Interoperability for images is guaranteed only for resolutions not exceeding 160x120 while the device can handle images larger than this exact boundary is given by memory not resolution GIF JPEG and PNG type images exceeding display resolution will be downscaled while maintaining aspect ratio BMP and WBMP images exceeding display resolution will be clipped 3 5 1 Text part of presentation e subset of unicode 3 5 2 Audio part of presentation e AMR NB decoding only e General Midi 1 0 File format 0 and 1 MID Copyright Siemens Pte Ltd Siemenes Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 4 of 28 Internal Service Use Only SIEMENS Pte Ltd SIEMENS 55 57 Level2ServiceManual CSO 3 5 3 PIM no part of presentation will be available via the start screen e vCard V
15. e requirements If you use the battery dummy make sure that the power supply voltage is correctly adjusted Bootadapter 2000 incl AC Adapter L36880 N9241 A200 serial cable and mobile connection cable IBM Compatible PC Pentium a ee Adapter cable F30032 P226 A1 TABLE 2 1 EQUIPMENT LIST FOR SOFTWARE PROGRAMMING Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 18 of 31 Internal Service Use Only SIEMENS Pte Ltd SIEMENS 855 57 Level 2 Service Mammal CSO 12 2 Flow chart for S W upgrading Plug in the Boot oo Start the SWUP S W upgrading in Sae ea ae A program progress Connect the AC adaptor to the Boot Adaptor NO Power up Boot Adaptor amp check ERROR TEST Mobile LED NO YES Select amp Execute 9 the Mobile S W iaai TEE Check Take note of error _ and rep eate YES H W setup S W S NO Check AC Adaptor Feedback Error to Tech Supp Dep YES END Correct Settings NO Faulty AC Adaptor Faulty Boot Adaptor A FLOW CHART FOR S W PROGRAMMING PROCESS Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 19 of 31 Internal Service Use Only SIEMENS Pte Ltd SIEMENS S55 57 Level
16. er in the next room or your microwave could send a message to your mobile phone telling you that your meal is ready In the future Bluetooth is likely to be standard in tens of millions of mobile phones PCs laptops and a whole range of other electronic devices As a result the market 1s going to demand new innovative applications value added services end to end solutions and much more The possibilities opened up really are limitless and because the radio frequency used is globally available Bluetooth can offer fast and secure access to wireless connectivity all over the world With potential like that it s no wonder that Bluetooth is set to become the fastest adopted technology in history Copyright Siemens Pte Ltd Siemenes Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 6 of 28 Internal Service Use Only SIEMENS Pte Ltd SIEMENS 855 57 Level 2ServiceManual CSO 9 KEY FEATURES e Hands free e Flash file system e New sound concept with polyphonic ringing tones e Kjava identical to K45 Manta e MMS e Bluetooth S55 only e Colour LCD display Battery e Nominal Capacity 750mAh e Lilon Battery Pack 700 mAh e Power Input 1 8 A 0 6 ms 0 2 A 4 ms e Cut off Threshold 3 2 V neighbouring cells 0 Talk Time e Best case approx 5 hours lowest output level with DTX e Worst case approx 2 5 hours highest output level without DTX e Conditions for DTX 40 user talk time SIM Card e Small
17. er seperated by releasing the hinges with a tweezer as indicated Separate the RF board from the back casing Step 11 The separated LCD amp the RF board SIEMENS Mobile When separating the keypad from the PCB ensure that the hinges are not broken otherwise the keypad might not work properly The LCD display could be further seperated from the main board by releasing the catch in the direction shown Fully disassembled S55 56 57 10 REASSEMBLY OF 55 56 57 For the reassembly of the 55 56 57 simply reverse the disassembly procedures from Step 12 to Step 1 Copyright Siemens Pte Ltd All rights reserved ICM MP CCQ ASP ASC 15 of 31 Siemens Techincal Support Center Internal Service Use Only SIEMENS Pte Ltd SIEMENS S55 57 Level 2 Service Manual Mobile 11SPARE PARTS amp PART NUMBERS wap Unit pare Parts Level 1 pare Parts Level 2 pare Parts Level 2 5 pare Parts Level 2 5e Documentation and Software Note For ALL SPARE PARTS amp PART NUMBERS PS refer to the E Commerce for the latest updated copy Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 16 of 31 Internal Service Use Only SIEMENS Pte Ltd SIEMENS S55 57 Level 2 Service Manual Mobile 12MOBILE SOFTWARE PROGRAMMING The common mobile software available is divided into language groups However this software does not contain the specific settings such as ringing tones
18. gle PCB phone with a bridgeless keypad unit and colour display The mechanical design has been conceived to allow general use of most of the electromechanical parts from K45 or L55 Tuna Full attention has been given to create a high sophisticated design showing galvanized side buttons softkeys navikey and earpiece cover In a addition the display lens with chrome ring An additional design frame around the dsiplay lens is introduced to realize a second colour without complicated spray and masking process The display lens is decorated from outside with IMD and anti scratch protection L55 Marlin designafairs GmbH 14 Dezember 2001 Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 12 of 31 Internal Service Use Only SIEMENS Pte Ltd Mobile S55 57 Level 2 Service Manual 8 1 55 56 57 Mechanical Diagram asem 1m0 aes ee es ae UPEN So i ABojouyoa UoVesooap pue Bununoyy d e J C U J 0 U M 9 A Sy SUBLU SHS 3q Ul payans EILA Kawin WAJA UO payans yeay JO padeus nu payons jean Jopadeus 4 ul padeus G azman 19ntboe1 2d WWE 0 EN 18848 Ad pa tae asen Jaddn pedhang soy Jae JEPIOH WIS MOPUIAA YOYI SSS Se l yuo Buipiaius yoeq Suipays an vo panj agen DOWI wd yan MOPU Agasig kad i lawen uo panji Sp ul padeus peziueyeb 4WI Dd WIN
19. lly configured internet access with a 32bit NETSCAPE Browser Remark Microsoft Internet Explorer and Netscape versions above 4 7x cannot be used There is a 90 day trial version of Netscapes Navigator 4 6 in english or german available on the PICS installation CD provided by Siemens Every user is responsible for a proper installation matching the license agreements For installation and further access you need the following 1 The Installation CD which contains the SETUP programm for the InterSEC plugin the trial version of Netscape Navigator 4 6 german english the german english documentation 2 A chipcard which is authorised by ICP MP OI KLF in order to decode the protected PICS Websites and a password which gives you access to your chipcard Chipcards can be ordered via your responsible Customer Care Manager within Siemens 3 A supported chipcard reader Smarty or Siemens B1 in order to access your chipcard Remark We recommend to use Siemens B1 reader Similar device to B1 is Cardman 9010 Generate Codes In the module Generate Codes you can choose to generate Master Phonecodes Simlock Unlock Codes Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 22 of 31 Internal Service Use Only SIEMENS Pte Ltd SIEMENS S 55 57 Level 2 Service Manual Mobile E FAN 104 SIEMENS Home Help Contact NG AN Generate codes Prin
20. r interface on the existing circuit switched GSM network This gives the option to use a packet based data service The information is split into separated but related packets before being transmitted and reassembled at the receiving end Theoretically maximum speeds of up to 171 2 kilobits per second kbps are achievable with GPRS using all eight timeslots at the same time This is about 3 times as fast as the data transmission speed possible over today s fixed telecommunications networks and 10 times as fast as current Circuit Switched Data services on GSM networks Figure1 Example of GPRS data transmission Example Cell with 1 Frequency channel 1 physical channel for signalling 4 physical channels for Circuit switched and 3 physical channels for Packet switched Copyright Siemens Pte Ltd Siemenes Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 1 of 28 Internal Service Use Only SIEMENS Pte Ltd SIEMENS 855 57 Level 2 Service Manual TE 2 K JAVA APPLICATION Java based game system Java Application Manager Application launcher and download manager JAM Supports HTTP based OTA download of applications over GPRS and CSD RAM for Java applications Available RAM for Java applications ie program code and data during application runtime Minimum 100 Kbyte Has to be taken as working assumption for application development Goal 145 Kbyte as SL45i not committed MIDP 1 0 CLDC 1 0 A
21. rinter port also see Installation of IMPRINT and MUST feature a printing resolution of 300dpi Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 26 of 31 Internal Service Use Only SIEMENS Pte Ltd gnant S55 57 Level 2 Service Manual 15 General Testing Information General Information The technical instruction for testing GSM mobile phones 1s to ensure the best repair quality Validity This procedure is to apply for all from Siemens AG authorized level 2 up to 2 5e workshops Procedure All following checks and measurements have to be carried out in an ESD protected environment and with ESD protected equipment tools For all activities the international ESD regulations have to be considered Get delivery gt Ensure that every required information like fault description customer data a s 0 is available gt Ensure that the packing of the defective items is according to packing requirements gt Ensure that there is a description available how to unpack the defective items and what to do with them Enter data into your database depends on your application system gt Ensure that every data which is required for the IRIS Reporting is available in your database gt Ensure that there is a description available for the employees how to enter the data Incoming check and check after assembling Verify the customers fault description Copyright
22. rnal Service Use Only SIEMENS Pte Ltd SIEMENS Simlock Unlock Code apa 445229518498560 ina s denied New query In this case please contact your responsible Siemens Customer Care Manager Printing IMEI label The module Print IMEI label offers the possibility to print IMEI labels for mobiles again SIEMENS Home Help Contact V L IgE 10 1 NG AN M G MA Print IMEI label Welcome Fleuren Ralf LA e ICM MP OI KLf ee EE Don ana BFB status You are logged in as ST_KLF Phone Info Click here to change user profile Print IMEI labels Test printer Yes No Reset input Print label Letzte nderung 01 03 2002 Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 25 of 31 SIEMENS Pte Ltd SIEMENS Saas Level 2 Service Manual MObif Simlock Unlock Code Cee 445229518498560 o Jag AN New query You are able to print up to six labels in just one step To prevent that misaligned labels are being printed the setting test printer Yes is activated as default After having printed a well aligned test label you can switch setting to No and print the correct label Print IMEI label Product type A image available Hint For correct printing of IMEI labels you must have a Zebra labelprinter with special material that fits for label printing This printer has to be connected to local LPT1 p
23. rved ICM MP CCQ ASP ASC 20 of 31 Internal Service Use Only SIEMENS Pte Ltd S55 57 Level 2 Service Manual 14PICS T 4 SIEMENS X 1 g Z ON Vd DN o W L LONG iy AR Generate codes ICM MP OIl KLf Phone Info Letzte Anderung 01 03 2002 Overview The following functions are available for the LSO e Generate PINCODE PICS Internet Print IMEI label En 119 END Wits 10H 1 CDS BFB status PICS _ Mobile Phones Nw a e Generate SIMLOCK UNLOCK Code e Print IMEI labels Home a 6 SIEMENS Mobile Help Contact Welcome Fleuren Ralf You are logged in as ST_KLF Click here to change user profile The access to the server which is located in Kamp Lintfort is protected and will only be granted to authorized users being supplied with a special coded chipcard Chipcards and the administration services of the PICS database are provided by PICS TRUST Center at department ICP MP OI Kamp Lintfort In case of any questions or requests concerning chipcards or administration of the database please ask your responsible Siemens Customer Care Manager Copyright Siemens Pte Ltd All rights reserved ICM MP CCQ ASP ASC 21 of 31 Siemens Techincal Support Center Internal Service Use Only SIEMENS Pte Ltd SIEMENS S55 57 Level 2 Service Manual Mobile Installation for Windows 95 98 NT 2000 Requirements In order to use the PICS Internet websites you need a fu
24. s SL45i including performance optimizations from yes SL45i Infusio OEM extensions Proprietary API extensions as SL45i Including yes Siemens Game API HTTP API over GPRS SL45i only over CSD yes Copyright Siemens Pte Ltd Siemenes Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 2 of 28 Internal Service Use Only SIEMENS Pte Ltd SIEMENS S55 57 Level 2 Service Manual Mobile 3 MMS Mulitmedia Messaging 3 1 Standard compliance e 3GPP TS23 140 R99 e WAP 205 206 209 e MMS Conformance Document V2 0 0 3 2 Bearer e WAP 1 2 1 incl WAP push and WTP SAR 3 3 Display e Resolution 101 x 80 pixels e Colour depth 256 colours e Technology C STN 3 4 Presentation MMS SMIL presentation slide show according to MMS Conformance Document V2 0 0 MO and MT sound Figure 1 Structure of a multimedia message According to the MMS Conformance Document V2 0 0 a presentation consists of one or more slides Each slide can consist of one or all of the following elements e Image e Text e Sound Copyright Siemens Pte Ltd Siemenes Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 3 of 28 Internal Service Use Only SIEMENS Pte Ltd SIEMENS S55 57 Level 2 Service Manual Mobile If other elements are used in a MM these elements will not be shown in the presentation but can be accessed via a separate start screen that will be displayed after the presentation stops If
25. ss 4 Mobile phone PCN nominal 1W Specification Class 1 Mobile phone Transmitter output characteristics is according to GSM 11 10 specification implying all specified operating conditions temperature battery level Transmitter setpoints will be specified for GSM and PCN when typical values and statistical values become available Bridgeless 12 digit block 0 9 and two function keys SEND END in one block with small letters ON OFF key combined with the END key the symbol inside O is used as a symbol for ON OFF 2 soft keys 4 way navigation key designed as centred rocker type white as illumination colour printed lettering in three colours orientation at key 5 Acoustics comfortable earpiece with optimal acoustics omni directional microphone loud signal emitter gt 95 dBa at 5cm distance x different call melodies y melodies either with internal melody composer all melodies and sounds with increasing volume because of the possible handsfree mode four different and one increasing volume level Copyright Siemens Pte Ltd Siemenes Techincal Support Center All rights reserved ICM MP CCQ ASP ASC of 28 Internal Service Use Only SIEMENS Pte Ltd SIEMENS S55 57 Level 2 Service Manual Mobile 6 COMPARISON WITH PREVIOUS PRODUCTS Supported Dual Band Dual Band Dual Band Triple band Systems E GSM 900 GSM 1800 E GSM 900 GSM 1800 E GSM 900 GSM 1800 E GSM 900 1800 1900 Stand by approx
26. t IMEI label BFB status ICM MP OI KLf You are logged in as ST_KLF Phone Info Click here to change user profile Generate Simlock Codes or Master Phonecodes MasterPhonecode C Simlock Unlock Code Reset input Retrieve code Letzte nderung 28 03 2002 Master Phonecodes The Master Phonecode is used to unlock blocked mobiles Master Phonecodes can only be supplied for mobiles which have been delivered in a regular manner Master Phonecode it nn s30880 S4100 4100 22 Delivery Date mm 00 YY Y 14 06 7000 Master Phonecode 0003 1 1564237 New query Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 23 of 31 Internal Service Use Only SIEMENS Pte Ltd SIEMENS S55 57 Level 2 Service Manual Mobile Simlock Unlock Code The Simlock Unlock Codes can only be generated if the following conditions are given Mobile must have an active Simlock inside The user must be given the authorization to obtain Simlock Unlock Codes for the variant of the operator to which the mobile was delivered last time Simlock Unlock Code 24859 C2700 A20 10 Delivery Date MM pp YW a 03 05 1996 F0001 199 198342 New query Hint If there s no such authorization you ll get the following screen Copyright Siemens Pte Ltd Siemens Techincal Support Center All rights reserved ICM MP CCQ ASP ASC 24 of 31 Inte
Download Pdf Manuals
Related Search