MMBAK-1 - Maximum Motorsports
Contents
1. 3430 Sacramento Dr Unit D Maximum San Luis Obispo CA 93401 Telephone 805 544 8748 Motors orts Fax 805 544 8645 p fee O OO O O www maximummotorsports com SVO M C Adapter Fitting 11 1981 1986 Vehicles MMBAK I 3 Measure the depth to the mounting pad and record this dimension as D2 Read all instructions before beginning work Follow ing instructions in the proper sequence will ensure the best and easiest installation 4 Subtract D2 from D1 and record this dimension as D3 NOTE A new master cylinder should be bench bled 5 Measure the distance that the pushrod pro per the factory service manual before being installed trudes from the master cylinder mating surface on the car on the brake booster Be sure to measure to the tip of the pushrod Adjust the length of the Brake Booster Push Rod Adjustment pushrod to be slightly less 005 to 010 than D3 from Step 4 This will prevent accidental pre load of the master cylinder from the brake 2 Measure the pushrod bore depth and record push rod this dimension as D1 Be sure to measure to the very bottom of the radiused pushrod bore M C Cutaway 1 Remove your stock master cylinder n s i if Any is ti iF Vesna it jj Wy Na SENS ny n Ri PN t ki aana aN a bE ETT hileta saal ert bidet hia je ES ab lt D1 gt Measure to the bottom of the bore a fat NOTE Master cylinder is not and SVO MMBAK Irl indd l Copyright 2010 Ma2. ximum Motorsports Inc Master Cylinder Installation This kit contains 6 Install the new master cylinder onto the brake 1 MMBAK 1 Adapter Fitting booster Torque the nuts to 25 ft lbs 7 Install the adapter fitting MMBAK 1 into the for ward port of the master and tighten firmly 14 ft lbs 8 Thread the rearward line directly into the rear port Tighten firmly 14 ft lbs Use a flare wrench to avoid rounding off brake fittings 9 Thread the forward brake line into the MM BAK 1 adapter fitting Hold the previously tight ened MMBAK 1 fitting with a wrench while firmly tightening 14 ft lbs the brake line with a flare wrench 10 Fill the master cylinder with fluid and bleed all 4 brakes per the factory service manual 11 Have a friend firmly depress the brake pedal and inspect all fittings for leaks 12 Test drive and enjoy Copyright 2010 Maximum Motorsports Inc 2 MMBAK Irl indd
Download Pdf Manuals
Related Search