Scavenger EVO directions
Contents
1. with oil cap on start engine Run engine until oil discharging from hose changes color approximately 20 oz to 24 oz of oil will be discharged At this time shut off engine Helpful tip Place open end of hose into empty marked container This will help measure the amount of discharging oil See photo 7 7 Remove Scavenger from filter housing mount clean mounting surface 8 Install new oil filter and top off oil tank as specified in service manual Visit our website www roguechopper com2. ROGUE CHOPPER LLC Caaquanntar Wey P O Box 518 TIL Ts U Accord MA 02018 wW MI U Toll Free Tech Help Line PE The TOTAL Oil Change System www roguechopper com PART RC101 EVOLUTION BIG TWIN The Scavenger should be used only by qualified personnel Read instructions completely If you do not feel qualified do not M install or perform the Scavenger oil change See warranty for details Scavenging works best when motorcycle is secured in an upright position and engine at normal operating temperature Use Caution when using The Scavenger Total Oil Change System as engine and engine oil are HOT 1 Drain oil tank completely and refill with fresh oil until the full mark is reached 2 Remove oil filter and clean filter mount flange as specified in service manual 3 Lube gasket on Scavenger and install Scavenger on filter mount and tighten 1 2 to 3 4 of a turn after gasket makes contact with flange Leave one of the outside holes close to bottom See photo 3 4 Install supplied hose barb fitting in the bottom hole and snug Install supplied plug fitting in opposite outside hole and snug leaving center hole open Helpful tip It may be easier to install fittings with Scavenger removed from filter housing 5 Install supplied hose onto hose barb and secure with wire tie Place open end of hose into suitable empty container 6 Making sure oil tank is full of fresh oil as specified in service manual
Download Pdf Manuals
Related Search