Front Air Piston Instructions
Contents
1. With your front forks and legs off of the bike remove stock upper caps Important The springs inside your fork tubes are under load Use an approved compressor when removing spring Using a pick remove your stock o ring from your caps if using one of Misfit s Short Neck Slip Fit Kits Step Three Tape off threads of new caps to keep from damaging o ring on install Using bearing grease lubricate o ring entirely Install o ring on new caps then remove tape Caps shown here with o rings installed Using bearing grease lubricate by inserting bearing grease into the slot in the delrin guides as well as the cavity in the center Step Eight Piston shown lubricated and ready for installation Using a measuring tape measure 8 inches of coil from the least dense portion of the spring Mark your spring here Step Eleven Using a cutoff wheel cut your spring so that it is left flat at the bottom and de burr Step Twelve Insert cut portion downward into fork tube Step Thirteen Replace reccommended volume of oil into fork tube Refer to your service manual for specifications Step Fourteen Insert piston into fork tube with the inner threaded portion pointing outward as shown here Step Fifteen Reinstall fork cap Final Step Torque fork cap to reccommended factory specs 26 Misfit Short Neck 30 Misfit Short Neck
Download Pdf Manuals
Related Search