PDF HERE - tetra.so
Contents
1. 5 8 15 Reverse shift Reverse shift is useful for temporary listening on the repeater input frequency and transmitting on the repeater output frequency Reverse shift may be switched on and off by pressing only i e without first pressing the H button With reverse shift enabled an R is shown on the display instead of S 16 Squelch trip level setting Display Press Select Function Press 2 The squelch level is then adjustable using the keys 0 and or C and D 17 The MENU For lack of buttons on the FM1200 1100 1300 a number of less frequently used functions have been gathered into a Menu Once in the menu you can select between available options by means of the 0 and keys Option values may be modified as required by pressing the H button In that case the indicator with the H key will be visible Options requiring a number or text to be set may also be edited using the H key However these entries need to be confirmed by pressing an unused key or the H key Access the menu as follows Press H Select Function Press 4 00 00 MENU To keep the menu reasonably tidy items have been distributed across submenus The submenus may be viewed from the main menu by pressing the H button Like the main menu submenus are closed by pressing an unused key Available menu items Options Shift KHZ Define amount of shift for repeaters Adjust value using n2. FM 1200 full keypad instructions Keyboard Layout Volume On Off Saugich defeat Tone burst Cloar ZYEI code Delete Down Cursor left Saueich code Invert VrO Memory neat character 1 2 3 Transmit power Squelch level CICSS tone 4 5 6 MENU Status menu Show name we 0 Scamming i eserse shitty Skip while scanning Cail Shift Main Functions Key s Function 0123456789 Enter channel frequency or number Scanning Reverse shift E Activate tone squelch CTSS Stone F Go to Calling Channel G Switch between VFO and Memory H Select second function of next key Second alternate function Key Function Adjust transmit power Adjust squelch trip level Select CTCSS tone To MENU To Status Menu Show names with memory channels Select step size Exclude memory channel from scanning Call Shift off Select tone squelch Clear Priority Channel Clear memory Channel onmo When the transceiver is switched on the upper line of the display shows the current channel or the frequency If a valid tone code is received it is displayed in the lower right hand corner of the display The lower display line shows an S signal strength meter in the form of a horizontal bar This is called the normal state To activate the second function of a key press the H key The text Select Function will appear
3. conversion This is the most annoying question we get There is no such thing as an FM1000 The designation FM1000 refers to a family of more than 50 different transceivers rather than an individual type First do your homework by analysing the type code printed on the label at the rear of the radio Use Appendix B for reference 11 I have available a boxful of FM1000 parts and other Philips PMR bits what should do with it Contact Jan Buiting PE1CSI proprietor of the Philips Mobile Radio Collection on email peicsi amsat org Jan will give you a Freepost address so you can turn your surplus into a donation to the Collection and pay no postage 12 15 your firmware and displayware suitable for VHF or UHF FM1100 s Not completely Watch for postings in the FM1000 Newsgroup or uk amateur radio Ta Tb emnes Ee ee ee ey SO eu co the length of cable supplied for connecting to the socket of the Battery Lead Assembly 5 Using the loudspeaker bracket as a template mark and drill two 3 4mm diameter holes Secure loudspeaker with two No 10 self tapping screws from the bagged items Push the two pins on the Loudspeaker 3 lead into pins 1 3 of the Battery Lead Connector as shown below Note that the loudspeaker is not a polarity conscious item CONNECTOR REAR VIEW Loudspeaker Live Remote Alarm Battery External Alert Loudspeaker Ground Battery ov Ignition NOTE Observe
4. menu 4 Select Step Size Display Select Function Step size Press H Press 8 The desired step size is selected by pressing the 0 and keys lt or gt Confirm your selection by pressing any other key 5 Store favourite channels Up to 100 favourite channels per bank may be pre set in the transceiver A channel is stored as follows Display Select VCO mode SIs Enter the desired frequency and choose SHIFT and or CTCSS if required Press H Select Function Press G Store in xx Select a number if number has an arrow in front of it it has been taken for another frequency This is replaced Store in Oxx Press 8 If desired give the channel a name Name See Heading 10 for text entry Press H again See Heading 7 for the name display on off function 6 Storing Priority PR Channel It is very useful particularly in mobiles to have a single button available to retrieve the Priority Channel The Priority Channel frequency may be programmed as follows Display Select VCO mode esr Enter the desired frequency and set SHIFT and or CTCSS if required Press H Select Function Press F Calling Frequency Press If desired give the channel a name Name See Heading 10 for text entry Press H again Processing See Heading 7 for the name display on off function 7 Name display on off Names may be assigned to memory channels T
5. settings Settings Store This allows you to store settings Memory Copy now This allows the contents of the 24C65 64 EEPROM to be copied lt Language gt Nederlands English Deutsch Select one of three languages Status Diagnosis If the error indicator F is visible the cause of the problem may be called up by pressing the H button 18 Calls The transceiver allows up to 10 different tone sequences to be stored These tone sequences may be used to selectively call up stations Calling Display Press H Select Function Press 0 Call Select the number station to be called Press Defining the codes Display Press H Select Function Press 0 Call Select the number station to be called Press Name Enter name see Heading 10 Press H to confirm Nr Enter the number Press H to confirm The H button is used to confirm entries Cancel entry with any other key Appendix E Frequently Asked Questions FAQ Below is a list of questions we have been asked over and over again together with the standard answers supplied 1 My converted FM1200 does not generate tones how come Step through the Status Menu H 5 If you see Tone CPU not active you have either made an error in mounting the tone system PROM 32 pin PLCC 27C256R or the wire link next to the tone CPU is not set to the ground position Check your solder work carefully using a continui
6. OFF SWITCH ON PRESS GREEN H CHOOSE SUBMENU gt PRESS 0 TO SCROLL TO WIDTH 144 145MHZ 2M PRESS GREEN H WIDTH MENU 000 300 2M SWITCH OFF SWITCH ON PRESS 07045 TO SET TO 4M CALLING FREQUENCY 070 450 000 KEY MIKE ON amp OFF TO RECEIVE PRESS GREEN THEN 1 USE C DOWN amp D UP TO SET TRANSMIT POWER PRESS GREEN H WHEN SET PRESS GREEN H THEN 2 USE amp D TO SET SQUELCH PRESS GREEN H WHEN SET YOU HAVE SUCCESSFULLY RESET THE TRANSCEIVER TETRA COMMUNICATIONS VICTORIA CHAMBERS 1 VICTORIA ROAD NORTHAMPTON NN15EB
7. The second alternate function of the next key pressed is activated Press H again to return to the normal state 1 Select Frequency The transceiver operates in one of three modes Using the G button you may select between VCO and Memory mode The third mode is the Priority Channel which may be switched on and off with the F key VCO mode In VCO mode any frequency that complies with the selected step size 4 may be entered using the number keys on the keypad The transceiver automatically rounds off the frequency to a valid entry For example of you want to listen at 435 012 500 MHz at a step size of 12 5 kHz all you need to do is enter 501 435 435 435 012 500 If a step size of 25kHz is used entering 501 will cause the transceiver to round off to 435 000 000 Memory mode Starting from VCO mode up to 100 preset frequencies per bank may be stored in memory see Heading 5 These frequencies may be selected when in Memory mode while it is also possible to assign names to channel frequencies If no frequency has been assigned to the selected channel the transceiver produces an error beep and ignores the number entered Priority Channel mode Provided a frequency has been assigned to the Priority Channel see Heading 6 this feature allows you to change to this frequency at the flick of a switch The Calling Channel may be instantly selected by pressing the F key 2 Select CTCSS tone It may b
8. e undesirable for every transmission to be heard on a certain frequency A system called CTCSS is therefore used to pass only those transmissions containing a sub audible tone of a specific frequency In the receiver a CTCSS decoder is used to open the squelch and make the transmission speech audible when a valid CTCSS tone is detected The frequency of the CTCSS tone may be selected as follows Display Press Select Function Press 3 TXCT The lowest frequency is 67 0 Hz the highest 250 3 Hz The quasi value None is available to disable CTCSS Separate CTCSS frequencies may be used for TX and RX 3 Tone squelch The squelch may be remain closed until a valid ZVEI 5 tone code is received It is also possible to transmit a ZVEI 5 tone sequence at the start of every transmission Activate The tone squelch is activated by pressing the E key When receiving the yellow LED lights When transmitting the symbol T appears behind the frequency Adjust The code may be set as follows Display Press 8 Select Function Press E RX Now set the tone for the squelch The tone code has to be entered using the number keys If a number flashes this indicates a DTMF tone Press H TX Now set the tone to be transmitted 1750 Hz tone burst A tone burst is transmitted by pressing the PTT and Squelch Defeat buttons at the same time The frequency of the tone burst may be adjusted in the Audio
9. he FM1100 1200 radio is extremely rare in the Netherlands An update may be developed in the future 7 Is your firmware and displayware suitable for FM1000 s with a basic or standard console No it is not The text and graphics used by the conversion exceeds the capacity of the standard head which only allows a number of fixed symbols to be used and does not have a numeric keypad The basic console does not even have a display so its use is out of the question We suggest upgrading the radio by getting your hands on a numeric keypad head 8 Where can obtain the complete documentation of these wonderful radios A documentation package is available consisting of 1 FM1100 Service manual 2 Numeric Keypad Manual and 3 FM1200 1300 Service Supplement The lot weights approx 1 kg Price Euro 20 incl P amp P Please contact Jan PE1CSI on email peicsi amsat org 9 On my radio the display test does not work to start with I m getting solid black blocks only This problem may be caused by a faulty or incorrectly fitted display EPROM or LK4 15 jumper in the display console being set to the wrong position If the display EPROM is an 27C128 or 27C256 the centre pad of LK4 should be connected to 5V left hand position Ifa 276512 is used LK4 should be connected to A15 default position right hand 10 have just acquired an FM1000 radio at a focal rally Can 1 use it with your
10. he displaying of the name may be switched on and off as follows Display Press H Select Function Press 6 8 Clear memory channel Display CES Select Memory mode Select the channel to be cleared Press H Select Function Press S Clear Channel Press H Processing 9 Clear Priority PR Channel Display Select Prioruty Channel button F Press H Select Function Press F Clear Calling Press H Processing 10 Text entry Text entry using the keys on the keypad is largely similar to the method used on GSM phones For example the letters A B and C are behind the number key 2 The desired letter or character is selected by repeatedly pressing a number key The B button is used to delete a character Text beyond the cursor position will shift back just as with the DEL key when using a word processor The E button is used to enter a space All characters behind the keys on the keypad are shown in the table below The up and down arrow keys C and D may be used to step through a character group The cursor may be moved by pressing the left and right arrow keys F and G On completion of text entry press the H key 11 Scanning De transceiver is capable of scanning in Memory as well as in VFO mode To scan all frequencies Switch to VFO mode by pressing the G button Press the button To scan memory channels Select MEMory
11. loudspeaker polarity when connecting test equipment eg AF power meter to the radio Standard Mount Cradle only Mate Battery Lead Assembly 5 to rear connector on radio 1 Cassette Mounting Cradle only Secure the Battery Lead Assembly 5 to the rear of the cradle 9b using two 2 5 X 10mm self tapping screws from the bagged items 08556 FM 1200 WITH FULL KEY PAD TO SET POWER _ PRESS GREEN BUTTON PRESS 1 USE 3 OR 4 ON LEFT TO INCREASE OR DECREASE PRESS GREEN TO RETURN TO SET SQUELCH _ PRESS GREEN BUTTON PRESS 2 USE 3 OR 4 ON LEFT TO INCREASE OR DECREASE PRESS GREEN TO RETURN TO ENTER FREQ PRESS 07045 TO INPUT CALLING CHANNEL TO CLEAR KEYPAD LOCK PRESS RED BUTTON TWICE TETRA COMMUNICATIONS roe TETRA COMMUNICATIONS NORTHAMPTON INSTRUCTIONS TO SET FM 1200 WITH FULL KEYPAD SWITCH ON WAIT FOR SET FREQUENCY TO FORM IN LCD 450 000 000 OR SIMILAR NOT 070 27 FOLLOW SEQUENCE BELOW TO RESET PRESS GREEN H to SHOW CHOOSE FUNCTION PRESS 4 ct MENU PRESS 0 UNTIL USER CHOOSE SUBMENU gt PRESS GREEN H a USER USE 0 TO SCROLL THROUGH OPTIONS TO LCD LIGHT PRESS GREEN BUTTON THEN 9 TO SET TO ALWAYS ON PRESS GREEN H PRESS 0 TO MOVE TO BAND USER 70CM USE GREEN H TO CHANGE TO 2M PRESS 0 SHOWS RECEIVER TYPE USER USE GREEN H TO CHANGE FROM TO FRX FVCO IF SWITCH
12. may be transmitted immediately after 5 tone sequence Calisign lt text gt Define callsign transmitted during normal transmissions See Heading 10 Callsign generator Speed Define Morse speed 0 40 Adjust value with number keys Callsign generator Only TX TX amp LSP Callsign may be sent to loudspeaker Callsign generator After TX sec Callsign generator is activated seconds after the transmitter is keyed Adjust value with number keys Callsign generator Every sec Callsign generator is activated every seconds Adjust value with number keys User Submenu LCD backlight Off after s LCD backlight is switched off automatically seconds after last action My number D Define user s personal 5 tone code The transceiver produces an alarm tone on reception of this code Reply pas This code may be transmitted when the personal code is received Reply Yes No Enable disable replying to personal code Key acceleration Accel X Define acceleration of up and down key The longer the key is pressed the faster frequencies will be stepped through Keys Repeat Once If a key is held pressed its function may be automatically repeated Settings Update Fixed When Update is selected all settings are stored on switching off Fixed allows settings to be stored manually using the next menu item When switched on the transceiver employs the previously stored
13. mode by pressing the G button Press the button Press any key to stop scanning During scanning the red LED is illuminated if the transceiver has halted on a certain channel scanning may be resumed by pressing again During scanning indicator F is displayed 12 Exclude channels from scanning It is possible to skip certain memory channels while scanning Display Select MEMory mode 432 Select the relevant channel Press H Select Function Press Indicator E shows that the channel is skipped during scanning To cancel this setting perform the same keypresses in reverse order The indicator will disappear 13 Transmitter power Transmitter output power is dependent on The value set by the internal software Antenna matching Temperature To set transmitter power Display Press H Select Function Press 1 The transmitter power level may be adjusted by pressing keys 0 and or C and D Confirm desired level by pressing any other key 14 Repeater shift setting On the UHF radio the default value for the repeater shift is 1 6MHz On VHF the default value is 600 kHz The MENU allows any other value to be set up see Heading 17 To switch repeater shift on and off Display Press H Select Function Press Next there are 3 options Shift off El Shift negative TX frequency 1 6MHz lower sr 6 Shift positive TX frequency 1 6MHz higher
14. ty tester 2 Is it possible to omit the tone PROM it seems such a hassle to mount Sure but you will be unable to use any of the functions that require tone processing DTMF CTCSS 5 tone calling 1750 Hz etc 3 Can I use the FM1200 70cms for 9k6 packet radio We are not packet radio users but we re told that 9k6 is not possible because the varicap based automatic RF tracking system inside the FM1200 will faithfully counteract any frequency change beyond normal deviation caused by modulation signals 1k2 packet radio is possible without problems using a modem hooked up to the microphone connector 4 Other stations tell me my deviation is too low how can 1 adjust it They are probably listening in 25 kHz bandwidth If yours is an S FM1200 examine the type number then you can rely on it that the peak deviation has been accurately set to 2 5 kHz by the factory as required for 12 5 kHz channel spacing Similarly the R radio will produce 4 0 kHz peak deviation and may in rare cases require some reduction if used on 12 5 kHz spaced nets Open up the microphone and check electret microphone front is clean and element is properly seated in its holder 5 Does your conversion defeat the Philips PDP and CDP programming tools Yes Having converted the radio it will no longer recognize the PDP or CDP 6 Is your firmware and displayware suitable for 4 metre E0 band FM1000 s No it is not The EO band version of t
15. umber keys TX with SQ Possible Not possible With Not possible selected the transmitter can not be keyed while a signal is received Limit TX time 566 Define maximum duration of transmission Adjust value with number keys 0 none 430 440 300 500 144 146 100 200 Select VCO range UHF or VHF Range Wait for silence Wait briefly Scan until busy Indicates transceiver activity while in scanning mode Scan mode Scan mode Carrier Squelch With Carrier selected the transceiver evaluates signal strength this is faster Squelch is better for weak signals Audio Submenu rophone Normal PA The AF input may be sent to the loudspeaker output Tones gt 500Hz 1750Hz only Never Suppress Suppress beep tones Indicator C lights while suppressing Beep On Off Keyboard beep Beep Volume Volume of keyboard beep Roger beep On Off Transmit a beep on keying off the transmitter DTMF tones ms Define length of DTMF tones Adjust value with number keys ZVEI tones ms Define length of ZVEI tones used for 5 tone calling Adjust value with number keys Tone burst HE Define audio frequency used for opening repeaters Callsign generator Submenu Callsign generator On On hold TX Off The transceiver may transmit text in Morse Hold TX causes the transmitter to remain keyed until the text is finished After call On Off Callsign
Download Pdf Manuals
Related Search